You are on page 1of 6

UNIVERSITI TUN HUSSEIN ONN MALAYSIA

FAKULTI TEKNOLOGI KEJURUTERAAN

PERANCANGAN KULIAH
LECTURE PLAN

MAKLUMAT KURSUS (COURSE INFORMATION)


SEMESTER / SESI (SEMESTER / SESSION) : I/ SESSION 2015-2016 [Yr. 4, Sem. 1]
KOD KURSUS (COURSE CODE) : BNK 40403 [Credit: 3]
NAMA KURSUS (COURSE TITLE) : PACKAGING PRINTING AND LABELING
RASIONAL KURSUS (COURSE RATIONALE)
: Printing and labeling in packaging involve a variety of
sectors including food, drink, electrical, pharmaceutical,
cosmetics and chemical processing industries. It involve
color management/decoration package and label printing,
warehouse and dispatch labels, security labeling materials
and evident products. It is essential that the printing and
labeling solutions meets the requirements for clear
messaging and information, color and size specification, as
well as, putting a face on the product.

BEBAN AKADEMIK PELAJAR (STUDENT ACADEMIC LOAD) :


Kategori Aktiviti Aktiviti Pembelajaran Jumlah Jam/ Semester
(Category of Activities) (Learning Activities) (Total Hours/ Semester)
Kuliah (Lecture) 28
Pembelajaran bersemuka Tutorial / Amali (Tutorial / Practical) 42
(Face-to-face learning) Aktiviti pembelajaran berpusatkan pelajar lain
0
(Other student centered learning activities)
Penyediaan tugasan, projek dan lain-lain
8
Pembelajaran kendiri (Preparing assignment, project and others)
(Independent study / Ulangkaji
28
Non Face-to-face (Revision)
Learning)) Persediaan bagi pentaksiran
7
(Preparation for assessment)
Pentaksiran berterusan
4
Pentaksiran rasmi (Continuous assessment)
(Formal assessment) Peperiksaan akhir
3
(Final examination)
JUMLAH JAM BELAJAR PELAJAR (JBP) 120
(TOTAL STUDENT LEARNING TIME (SLT))
Kursus Pra-syarat (Prerequisite Course) : None
Nama Staf Akademik (Name of Academic Staff) : 1. En. Md Zin Ibrahim(Penyelaras Kursus)

Disediakan oleh (Prepared by): Disahkan oleh (Approved by):

Tandatangan (Signature): Tandatangan (Signature):

Nama (Name): Md Zin Bin Ibrahim Nama (Name): Bachik bin Abu Bakar

Tarikh (Date): 3 Sept 2013 Tarikh (Date): 3 Sept 2013

RPP-04 / Prosedur Pelaksanaan Kuliah


Edisi: / No. Semakan: 0
MATLAMAT (GOALS):
The course aims to provide a detailed knowledge on printing and labeling technology including the pratice on
their process, machine operation, printing coatings and bar codes.

SINOPSIS (SYNOPSIS):

A course designed to a combine of classroom lecture and assignment that allow the students to learn proper for
certain topics. The course covers topics of printing and labeling, label printing, printing process, and printing
operation, color management, coatings, and bar codes.

HASIL PEMBELAJARAN (LEARNING OUTCOMES):

Di akhir kursus ini, pelajar mampu untuk:


At the end of this course, the students would be able to:
(1) Analyze the characteristics of basic process of printing operation and significant of coatings in printing.
(PLO 1- C4)
(2) Revise the specifications of printing bar codes for package products marketing purpose. ( PLO2 - P6)
(3) Justify a suitable package design to the printing and labeling process. (PLO7 A3)

ISI KANDUNGAN (CONTENT):


MINGGU KANDUNGAN F2F Non Formal SL PENTAK
(WEEK) (CONTENT) L T P F2F Assess T SIRAN
ment (ASSESS
(hours) MENT)
1-2 1.0 Printing and Labeling 4 - 6 4 - 15 Practical
1.1 Introduction-Brief history of packaging - - - 1 1,
1.2 Differences between package and Test,
publication printing Assignme
1.3 Packages, packaging materials and how nt, Case
they are printed-flexible packaging; Study/Proj
corrugated board; folding carton; metal ect/Industr
cans; labels, wrappers and tags; rigid boxes ial Visit
and composite cans; bottles; caps and
closures; collapsible tubes; ice cream and
dairy cups
3-6 2.0 Labeling 8 - 12 8 - 30 Practical
2.1 Overview of packaging and labeling - - - 2 1,2
The purpose of packaging and package Test
labels Final
2.2 Types of packaging Exam
2.3Types of label-stock
2.4Adhesive and specialized
2.5Symbols used on packages and labels
2.7 Package label development considerations
7-8 3.0 Printing Process 4 - - 4 - 10 Final
3.1 Selecting the best design for the printing - - - 2 Exam
process
3.2 Flexography
3.3 Lithography
3.4 Rotogravure
3.5 Letterpress printing
3.6 Screen printing
3.7 Electrostatic and laser printing
3.8 Ink jet printing
3.9 Advantages and disadvantages
3.10 Comparison for each printing processes

RPP-04 / Prosedur Pelaksanaan Kuliah


Edisi: / No. Semakan: 0
MINGGU KANDUNGAN F2F Non Formal SL PENTAK
(WEEK) (CONTENT) L T P F2F Assess T SIRAN
(hours) ment (ASSESS
MENT)
9-10 4.0 Printing Operation 4 - 6 4 - 15 Practical 3
4.1 Design for printing- - - - 1 Final
designers function, design brief, keeping Exam
costs down
4.2 Printing colour-observing
colour, colour measurement and
specification, linework and spot colour,
process colour printing, effect of substrate
and ink on colour printing
4.3 Prepress operations-
standards, text and typesetting, pictures
and designs, image assembly, proofs and
proofing
4.4 Plates and other image carriers-
introduction, flexographic plates, gravure
cylinders, lithographic plates, letterpress
plates, screen printing, plateless printing
11-12 5.0 Coatings 4 - 3 4 - 12 Practical 3
5.1Classification of coatings - - - 1 Assign.
5.2Reasons for coating Final
5.3Application methods Exam
5.4Laminating
5.5 Coating materials-varnished, aqueous
coatings, UV and EB coatings, lacquers,
waxes and hot melt coatings, other coating
materials.
13-14 6.0 Bar Codes 4 - - 4 - 9 Final
6.1 Bar codes and the package printer - - - 1 Exam
6.2 Specifications for printing and bar codes
6.3 Structure of bar codes and
symbols
6.4 Printing and bar code symbol
6.5 Verification and generating bar code
symbols.
Industrial Visit - - 15 - - 15 Industrial
Visit Report
Preparation for assessment - - - 7 - 7
Continuous assessment - - - - 4 4
Final Exam - - - - 3 3
Total Student Learning Time 28 - 42 43 7 120

TUGASAN / PROJEK / AMALI (ASSIGNMENT / PROJECT / PRACTICAL):


Practice in laboratory (27 hours); technical visit at printing industry (15 hours)

ASSIGNMENT:
1. Prepare a Lab report and industry visit

PRACTICAL (42 HOURS) :


Laboratory works (27 Hours) and Industrial Visit at printing industries (15 Hours)

Practice I Pre-Press Process: Design, film maker, plate maker 9 hours

Practice II Press process: printing process on Offset Machine 9 hours

Practice III Post Press: Finishing process for example die cut, hot stamping, 9 hours
folding and sorting process

RPP-04 / Prosedur Pelaksanaan Kuliah


Edisi: / No. Semakan: 0
Practice V Technical visit at printing industry 15 hours

TOTAL 42 hours

PENTAKSIRAN (ASSESSMENT):
1. Kuiz (Quiz) : - %
2. Ujian (Test) : 10 % C4/PLO1
3. Lab (3 x Testing) : 15 % P5/PLO2
4. Individu Projek /Individual Project 10 % P5/PLO2
- Lab Report
5. Group Projek (Project Group): : 10% P5/PLO2
- Report/pesentation/CaseStudy /survey/model/prototype.
-Report: min -20 pages)
6. Technical visit (Technical report)/ 15 % A3 / PLO7
-Report/Prensentation
6. Lain-lain (Others) : - %
7. Peperiksaan Akhir (Final Examination) : 40% C5/PLO1
Jumlah (Total) : 100 % (50%C, 35%P, 15%A)

RUJUKAN (REFERENCES):
1. Adams, J. M. and Dolin, P. A. (2002), Printing technology. 5th Ed. Albany : Delmar. No. Panggilan Z244
.A32 2002
2. Calver, G., (2004) What is Packaging Design. Rotovision.
3. Caniglia, S. and Griffith, C. (2008), LaserMonks : the business story nine hundred years in the making.
New York : McGraw-Hill. No. Panggilan HD9792.U54 .C36
4. Joseph P. T. (2007), The Anilox Roll: Heart of the Flexo Process. 2nd Ed. TAPPI Press.
5. Nelson R. E. (2008), Package Printing. 2nd Ed. GATF. No. Panggilan TS196.7 .E42 1993
6. Kit L. Lam(2010) 3rd edition.The Wiley Encyclopedia of Packaging Technology. John Wiley &
Sons, Inc.
7. Calver, G., (2004) What is Packaging Design. Rotovision.
8. Kirwan, Mark J(2011). Food Packaging Technology. CRC Press. Blackwell Publishing. No. Panggilan
TP374 .F68 2011

KEHADIRAN / PERATURAN SEMASA KULIAH (ATTENDANCE / REGULATIONS DURING LECTURE)

1. Pelajar mesti hadir tidak kurang dari 80% masa pertemuan yang ditentukan bagi sesuatu kursus termasuk
kursus Hadir Wajib (HW) dan kursus Hadir Sahaja (HS).
Students must attend not less than 80% of the contact hours specified for a course including Compulsory
Attendance (HW) course and Attendance Only (HS) course.
2. Pelajar yang tidak memenuhi perkara 1 di atas tidak dibenarkan menghadiri kuliah dan menduduki
sebarang bentuk pentaksiran selanjutnya. Markah sifar 0 akan diberikan kepada pelajar yang gagal
memenuhi perkara 1. Manakala untuk kursus HW, pelajar yang gagal memenuhi perkara 1 akan diberi gred
Hadir Gagal (HG).
Students who do not fulfill item 1 of the above are not allowed to attend further lecture and sit for any form
of assessment. Zero 0 mark will be given to students who fail to comply with item 1. As for HW course,
students who fail to comply with item 1 will be given Failure Attendance (HG) grade.
3. Pelajar perlu patuh kepada peraturan berpakaian yang berkuatkuasa dan menjaga disiplin diri masing-
masing untuk mengelakkan dari tindakan tatatertib diambil terhadap pelajar.
Students should adhere to the dress regulations in effect and must discipline themselves to avoid from any
disciplinary actions.
4. Pelajar perlu mematuhi peraturan keselamatan sepanjang aktiviti pembelajaran dan pengajaran.
Students should adhere to the safety regulations throughout the learning and teaching activities.

RPP-04 / Prosedur Pelaksanaan Kuliah


Edisi: / No. Semakan: 0
MATRIK HASIL PEMBELAJARAN KURSUS DAN HASIL PEMBELAJARAN PROGRAM
(MATRIX OF COURSE LEARNING OUTCOMES AND PROGRAMME LEARNING OUTCOMES)
Dilampirkan (Attached).

RPP-04 / Prosedur Pelaksanaan Kuliah


Edisi: / No. Semakan: 0
MATRIK HASIL PEMBELAJARAN KURSUS DAN HASIL PEMBELAJARAN PROGRAM
MATRIX OF COURSE LEARNING OUTCOMES AND PROGRAMME LEARNING OUTCOMES

Fakulti (Faculty) : FAKULTI TEKNOLOGI KEJURUTERAAN Matrik ini perlu digunakan bersama:
(This matrix is to be used with)
Program (Programme) : BNK 1. Objektif Pendidikan Program (PEO)
(Programme Educational Objectives (PEO))
Kod Kursus (Course Code) : BNK 40403 2. Hasil Pembelajaran Program (PLO)
(Programme Learning Outcomes (PLO))
Nama Kursus (Course Title) : PRINTING AND LABELING PACKAGING

Pematuhan kepada PLO (Compliance to PLO)


Bil. Hasil Pembelajaran Kursus Kaedah Penyampaian Kaedah Pentaksiran

PLO3

PLO4

PLO5

PLO7

PLO8
PLO1

PLO2

PLO6

PLO9
KPI
(No.) (Course Learning Outcomes) (Method of Delivery) (Method of Assessment)

1. Analyze the characteristics of basic process of Lecture / Discussion Final Exam


printing operation and significant of coatings in x / Video / Field Trip Test 50% of
printing. (PLO 1- C4) students
2. Revise the specifications of printing bar codes for Lecture / Discussion Lab, Assigment, Case obtained
package products marketing purpose. ( PLO2 - / Video / Field Trip / Study/Project/Industri 50%
x
P6) Case study al Visit marks
and
3. Justify a suitable package design to the printing Lecture / Discussion Assignment Report above
x
and labeling process. (PLO7 A3) / Video / Case study
Jumlah (Total) 1 1 1

Taksonomi Pembelajaran (Learning Taxonomy)


Kognitif (Cognitive) Psikomotor (Psychomotor) Afektif (Affective)
C1 Pengetahuan (Knowledge) P1 Persepsi (Perception) A1 Menerima (Receiving)
C2 Pemahaman (Comprehension) P2 Set (Set) A2 Memberikan Maklum Balas (Responding)
C3 Aplikasi (Application) P3 Respons Berpandu (Guided Response) A3 Menilai (Valuing)
C4 Analisis (Analysis) P4 Mekanisme (Mechanism) A4 Mengorganisasi (Organising)
C5 Sintesis (Synthesis) P5 Respons Ketara Kompleks (Complex Overt Response) A5 Menghayati Nilai (Internalising)
C6 Penilaian (Evaluation) P6 Adaptasi (Adaptation)
P7 Lakuan Tulen (Origination)

RPP-04 / Prosedur Pelaksanaan Kuliah


Edisi: / No. Semakan: 0

You might also like