Professional Documents
Culture Documents
EPC Seminar
14th of Sep, 2017 Jeong Dong Kwan
CONTENTS
1. About LEWA‐Nikkiso
2. Introduction of Canned Motor Pump
3. Features of Canned motor pump
4. Applications
CONTENTS
1. About LEWA‐Nikkiso
2. Introduction of Canned Motor Pump
3. Features of Canned motor pump
4. Applications
1. About LEWA‐Nikkiso
NIKKISO CANNED MOTOR PUMP / Japan
NIKKISO CYROGENIC PUMP / USA
1. About LEWA‐Nikkiso
PUMP
S
LEWA triplex pump
LEWA Ecoflow
LEWA multiplex series
LEWA micro pump
1. About LEWA‐Nikkiso
Integrated Systems
LEWA ecofoam
CIP(Chemical injection package)
1. About LEWA‐Nikkiso
Integrated Systems
Ordorizing system
LEWA EcoPrime®
CONTENTS
1. About LEWA‐Nikkiso
2. Introduction of Canned Motor Pump
3. Features of Canned motor pump
4. Applications
2. Introduction of Nikkiso Canned Motor Pumps
2. Introduction of Nikkiso Canned Motor Pumps
[Different Pump Designs]
2. Introduction of Nikkiso Canned Motor Pumps
[Different Pump Designs]
2. Introduction of Nikkiso Canned Motor Pumps
2. Introduction of Nikkiso Canned Motor Pumps
2. Introduction of Nikkiso Canned Motor Pumps
HEAD‐CAPACITY ENVELOPE
CONTENTS
1. About LEWA‐Nikkiso
2. Introduction of Canned Motor Pump
3. Features of Canned motor pump
4. Applications
3. Features of Canned motor pump
Building Block System
Thrust balancing system
Bearing‐Monitor
3. Features of Canned motor pump
Building Block System
NIKKISO Non‐Seal® Pumps are only one in the world applying the
building block system to the canned motor pumps.
Wide interchangeabilities of pump modules and motor modules
are available and these modules can be freely combined,
so it is possible to minimize numbers of spare pumps, motors and
numbers of parts in stocks.
This also makes on site repair possible.
3. Features of Canned motor pump
Building Block System
3. Features of Canned motor pump
Thrust Balancing System
Thrust forces act on the shaft.
They are the result of different pressures at front
and rear of the impeller .
Thrust balancing system consist 3 orifice,
2 fixed orifice and 1 variable orifice.
This system eliminates these forces.
Mainly it consists of a pressure balancing chamber
at the rear of the impeller.
The grade of opening of the variable orifice controls
the pressure in the balancing chamber
and thus maintains the shaft in the required
position.
3. Features of Canned motor pump
Thrust Balancing System
3. Features of Canned motor pump
E‐motinor (Bearing wearing detector)
3. Features of Canned motor pump
E‐motinor (Bearing wearing detector)
When bearing wear occurs, the rotor assembly
shifts along the radial and/or axial position.
These minute shifts are detected by eight search coils
embedded in the stator, enabling precise readings
of bearing wear in both directions.
Real‐time bearing status is conveniently displayed on an easy‐to‐
read LED display
3. Features of Canned motor pump
E‐motinor (Bearing wearing detector)
CONTENTS
1. About LEWA‐Nikkiso
2. Introduction of Canned Motor Pump
3. Features of Canned motor pump
4. Applications
3. Applications
SGM-Series, HN-Type
Suitable for a broad range of clean,
nonvolatile liquids with moderate
temperatures
Capacity up to 780 m3/h
Head up to 300 m
Motor up to 200 kW
Temperature 60 to +200 °C
3. Applications
SGM-Series, HT-Type
Designed for hot fluid applications.
Process fluid is recirculated within the
motor section via an auxiliary impeller.
Capacity up to 780 m3/h
Head up to 300 m
Motor up to 200 kW
Temperature up to 400 °C
3. Applications
SGM-Series, HX-Type
Special Features
- Special winding insulation
- With E-Monitor
- Heating jacket for pump and
motor possible
Typical Application
- Liquids at temperatures
up to 400°C
- For solidifying liquids
3. Applications
SGM-Series, HQ-Type
Designed for fluids with steep vapor
pressure curves which would tend to flash
to vapor if returned to impeller eye after
picking up motor heat.
Capacity up to 180 m3/h
Head up to 200 m
Motor up to 44 kW
3. Applications
SGM-Series, HQ-Type
Example of Reverse circulation
3. Applications
SGM-Series, HM / HS-Type
Special Features
- Barrier between Pump and
motor section (throttle bush
or mechanical seal)
- External seal liquid possible
Typical Application
- Slurries up to 30% solids
3. Applications
SGM-Series, HM / HS-Type
Example of Back flushing
3. Applications
SGM-Series, HM / HS-Type
Reference Nikkiso Data sheet
3. Applications
OPTIONS
INDUCER
SEAL POT
REMOTE INDICATOR
DRY OPERATION PROTECTION (SAO RELAY)