Professional Documents
Culture Documents
2. Enseguida oprima el botón OK para ajustar el día de la semana en el que se encuentra, utilice
los botones + o - para elegir el dia, y vuelva a presionar OK.
3. Elija la hora actual con los botones + o -, en seguida oprima OK y repita la misma operación
para elegir los minutos.
4. Oprima el boton MENU por dos segundos hasta que aparezca la hora configurada con dos
puntos (:)parpadeando y el ícono CLOCK haya desaparecido.
Programación de eventos:
Antes de comenzar la programación asegúrese de que el equipo muestra la hora y día actual.
1. Presione el botón de MENU. hasta que en la pantalla aparezca el evento número 1 ON, (esto
quiere decir evento 1, hora y día de encendido) para programar.
Antes de utilizar su nuevo producto Steren, lea este instructivo para evitar
cualquier mal funcionamiento. 2. Presione el botón OK para programar el día que desea, selecciónelo con los botones + o -. En
caso de que requiera que su dispositivo se encienda todos los días o varios días de la semana
oprima + o - hasta que aparezca parpadeando el día o días seleccionados y vuelva a presionar el
I M P O R TA N T E botón OK (vea combinación de días de la semana).
La información que se muestra en este manual sirve únicamente como referencia
3. A continuación, el número de las horas comenzará a parpadear, ajuste la hora que desea
sobre el producto. Debido a actualizaciones pueden existir diferencias. Por favor, programar con los botones + o - y repita la operación para ajustar los minutos.
consulte nuestra página web (www.steren.com) para obtener la versión más reciente 4. En seguida presione el botón MENU para continuar con la programación de la hora y el día en
que desea apagar el evento 1, en la pantalla aparecerá la leyenda 1 OFF.
del instructivo.
5. Presione OK y repita las instrucciones anteriores para establecer el dia y la hora de apagado.
CONTROLES - De Lunes a Viernes: Aparece en pantalla Mo, Tu, We, Th, Fr.
En caso de que la pantalla no se active, cargue la batería del TEMP-08E conectando la - Sólo Sábado y Domingo: Selecciona sólo el fin de semana. En pantalla aparece: Sa, Su.
unidad a la corriente eléctrica durante 1 hora y presione el botón Reset.
Presione el botón RESET si desea borrar todas las programaciones e iniciar nuevamente.
Cuenta regresiva:
1. MENU: Use para ajustar la hora actual y Si desea configurar el apagado de un evento en cuenta regresiva, presione COUNTDOWN hasta
programar la hora de apagado/encendido del que aparezca CTD, en seguida oprima COUNTDOWN cuantas veces sea necesario hasta marcar
dispositivo conectado. el tiempo deseado en el que se apagará el equipo.
ESPECIFICACIONES
2. + / -: Permite aumentar/disminuir las
horas/minutos en la hora actual de los • Alimentación: 120 V~ 60 Hz 15 A máx. • Salida: 120 V~ 60 Hz 15 A máx.
eventos a programar.
El diseño del producto y las especificaciones pueden variar sin previo aviso.
Product design and specifications are subject to change without notice.
3. COUNTDOWN: Permite configurar una
cuenta regresiva para apagar el dispositivo Producto: Temporizador digital de 9 eventos
Modelo: TEMP-08E
conectado. Marca: Steren
PÓLIZA DE GARANTÍA
Esta póliza garantiza el producto por el término de un año en todas sus partes y mano de obra, contra cualquier defecto de fabricación y
4. MANUAL: Cambia entre los distintos funcionamiento, a partir de la fecha de entrega.
- OFF: Siempre apagado. El consumidor podrá solicitar que se haga efectiva la garantía ante la propia casa comercial donde adquirió el producto. Si la presente garantía se
extraviara, el consumidor puede recurrir a su proveedor para que le expida otra póliza, previa presentación de la nota de compra o factura respectiva.
8
- Auto OFF: Funciona de acuerdo con los DATOS DEL DISTRIBUIDOR
1. Press the MENU button until you see the CLOCK legend.
2. Then press the OK button to set the current day of the week use the buttons + or – to select the
day, and press OK again.
3. Select the current time with the buttons + or-, then press OK and repeat the same operation to
select the minutes.
4. Press the MENU button for two seconds until the time is shown with a colon (:) flashing and the
CLOCK icon desappears from the display.
Schedule of events:
Make sure that your device displays the time and current day before you begin programming.
1. Press the MENU button until 1 ON displays on the screen (this means event 1, time and day
Before using your new Steren´s product, please read this instruction of power) to set.
manual to prevent any damage.
2. Press the OK button to set the day you want, select it with the buttons + or -. In case you require
I M P O R TA N T that your device turns on every day or several days a week at the same time, continue by pressing
the button + or - until several or all days of the week flash and press the OK button again (see a
The instructions of this manual are for reference about the product. combination of days of the week).
There may be differences due to updates. Please check our website
3. Then the hours will start flashing, set the time that you want to program with the buttons + or - and
(www.steren.com) to obtain the latest version of the instruction manual. repeat the procedure to set the minutes.
4. Then press the MENU button to continue with the programming of the time and day you want to
turn off the event 1, the display will show the legend 1 OFF.
CAUTIONS 5. Press OK and repeat previous instructions to set the day and time off.
• Do not expose the product to extreme • Always use a soft, dry cloth to clean them.
You can program up to 9 different events.
temperatures.
-The days of the week appear in English.
-In lock-on mode, be sure that the equipment connected to the timer is turned on.
HIGHLIGHTS -Do not use electronic equipment with digital start.
Your new timer allows you to program up If you leave home for long periods, it has a A combination of days of the week:
to 9 activation or deactivation events of an function of random activation/deactivation, This device has 4 different forms of selection of the day of the week.
electric device. which turns on and off the scheduled devices Press the button + or - continuously during the programming mode for each of the options.
by several hours simulating the presence of -Throughout the week: select all days of the week. Display shows: Mo, Tu, We, Th, Fr, Sa, Su.
people inside the house.
It has an internal rechargeable battery -Per day: select only one day of the week.
to retain programming and time. It also -From Monday to Friday: appears on screen Mo, Tu, We, Th, FR
receives loads up to 1725 W or 15 A. -Only Saturday and Sunday: select only the weekend. Display shows: Sa, Su.
- Press the RESET button if you want to delete all settings and start again.
CONTROLS Countdown:
If you want to set a turn off event in countdown mode, press COUNTDOWN until CTD is displayed,
When the screen is not active, charge the battery of the TEMP-08E by connecting the unit to immediately press COUNTDOWN as many times as necessary to mark desired time in which will
the electrical power for 1 hour and press the Reset button. turn off the device.
S P E C I F I C AT I O N S
1. MENU: Use to set the current time and set
the events power time. • Input: 120 V~ 60 Hz 15 A max. • Output: 120 V ~ 60 Hz 15 A max.
2 + /-: Allows to adjust (rise/lower) the hours/ Product design and specifications are subject to change without notice.
minutes of the programming events.
Product: 9 Events digital timer
Part number: TEMP-08E
Brand: Steren
3. COUNTDOWN: Allows to configure a
WARRANTY
countdown to turn off the connected device.
This Steren product is warranted under normal usage against defects in workmanship and materials to the original
purchaser for one year from the date of purchase.
- ON: Always on, works as a regular outlet. 2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
-Auto ON: Keeps the device on until it reaches
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of
the turn off time.
the addresses mentioned later.
- OFF: Always off.
- Auto OFF: Works according to the scheduled THIS WARRANTY IS VOID IN THE NEXT CASES:
events. If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed
instructions, improper repair by unauthorized personnel, improper safe keeping, among others.
5. RESET: Press to delete all the parameters. 8
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
01 800 500 9000