You are on page 1of 64

Grove TMS800E

Product Guide
ASME B30.5
Imperial 85% / Metric 85%

Features
• 12,6 m - 39 m (41 ft - 128 ft) four-section full power MEGAFORM™ boom

• 10 m – 17 m (33 ft – 56 ft) manual offset bi-fold swingaway

• 2 x 6,1 m (2 x 20 ft) intermediate lattice inserts

• 10 886 kg (24,000 lb) counterweight with hydraulic removal system

• Cummins QSM 402, six-cylinder after cooled 300 kW (402 hp) engine

• Front and rear air ride suspension


Features

MEGAFORMTM boom
The Grove MEGAFORM™ boom shape
eliminates weight and increases capacity
compared to conventional shapes.

Suspension system
Standard front and rear air ride suspension
provides a comfortable ride at maximum speed of
105 km/h (65 mph).

Lattice extension
For improved up and over reach, a bi-fold lattice
extension is available on the TMS800E and
manually offsets from 0° to 40°.
Contents

Specifications 4

Dimensions 7

Travel proposals 8

Working range - Imperial 85% 9

Load charts - Imperial 85% 11

Working range - Metric 85% 35

Load charts - Metric 85% 37

Load handling 61

Symbols glossary 62
Specifications

Superstructure
Cab
Boom Steel constructed cab with acoustical lining, hydraulic
tilt capability to +20°, tinted safety glass, adjustable
12,5 m - 39 m (41 ft - 128 ft) four section, full power operator’s seat, opening side and rear windows, sliding
MEGAFORM™ boom. skylight with wiper, and sunscreen. Other features
Maximum tip height: 41,1 m (135 ft). include hot water heater and defroster, armrest
integrated single axis electronic crane controls and
ergonomically arranged instrumentation.
Boom nose

Four nylatron sheaves, mounted on heavy duty tapered Swing


Swing
roller bearings with removable pin type rope guards.
Quick reeve boom nose. Removable auxiliary boom Axial piston fixed displacement motor and planetary
nose with removable pin type rope guard. gear box. Infinitely variable to 1.7 rpm. Holding brake
and service brake.
Boom elevation
Counterweight
Single lift cylinder with safety valve provides boom
angle from -3˚ to +78˚. 3629 kg (8000 lb) consisting of various sections with
hydraulic installation/removal system.
Offsettable lattice extension
*Optional “Heavy Lift” package consisting of (1) 1814
10 m - 17 m (33 ft - 56 ft) bifold lattice swingaway kg (4000 lb) and (1) 2722 kg (6000 lb) section, for a
extension, manual offsettable at 0˚, 20˚ and 40˚. total of 8165 kg (18,000 lb).
Maximum tip height: 58,2 m (191 ft)
*Optional “XL” counterweight package consisting of
(1) 2721 kg (6000 lb) slab, (1) 1814 kg (4000 lb) slab
* Optional lattice extension and (2) 1361 kg (3000 lb) wing weights in addition
to standard; for a total of 10 886 kg (24,000 lb) of
Two 6,1 m (20 ft) inserts for use with lattice counterweight.
swingaway extension to increase length up to 23,2 m
(76 ft) or 29,3 m (96 ft). Hydraulic system
Maximum tip height: 70,1 m (230 ft)
2 piston and 3 gear type pumps with at total capacity
Load moment and anti-two of 593.5 l/m (156.8 gpm). Maximum operating
block system pressure is 27,6 MPa (4000 psi).
Standard “Graphics Display” load moment and Thermostatically controlled oil cooler keeps oil at
anti-two block system with audio-visual warning and optimum operating temperature.
control lever lockout. These systems provide electronic Tank capacity: 657 l (173.5 gal)
display of boom angle, boom length, radius, tip height,
relative load moment, maximum permissible load, Hoist
load indication and warning of impending two-block
condition. The standard “Work Area Definition
System” allows the operator to pre-select and define Main and auxiliary hoist are powered by axial
safe working areas. If the crane approaches the pre-set piston motor with planetary gear and brake.
limits, audio-visual warnings aid the operator in “Thumb-thumper” hoist drum rotation indicator alerts
avoiding job-site obstructions. operator of hoist movement.

Single line pull: 1st layer: 9185 kg (20,250 lb)


3rd layer: 7716 kg (17,010 lb)
5th layer: 6650 kg (14,660 lb)

Maximum line speed: 157 m/min (514 fpm)

Maximum permissible line pull:


7620 kg (16 800 lb) 35x7 rope
4 *Denotes optional equipment
Specifications

Rope diameter: 19 mm (3/4 in)


Engine - Export
Rope length: 185 m (607 ft) main hoist
185 m (607 ft) auxiliary hoist Cummins QSM 11 six cylinder, turbo charged and after
cooled diesel engine. 10.8 L (660 in3), 300 kW (402 bhp)
Rope type: 35 x 7 Class, Rotation Resistant at 1800 rpm. Maximum torque 1898 Nm (1400 lb-ft)
Maximum rope stowage: 256 m (841 ft) at 1400 rpm. “Off Highway” Tier lll EPA, Carb and EU
Stage IIIA compliant.
Carrier Equipped with engine compression brake, audio-visual
engine distress system and ether start aid.
Chassis Fuel Requirement: Maximum of 5000 ppm sulfur
content.
Triple box section, four-axle carrier, fabricated from high
strength, low alloy steel with towing and tie-down lugs.
Fuel tank capacity

Outrigger system 379 L (100 gal).

Four hydraulic telescoping, two-stage, double box beam


outriggers with inverted jack and integral holding valves. Transmission
Quick release type outrigger floats 610 mm (24 in)
diameter. Three position setting with fully extended, Roadranger manual transmission with 11 speeds forward,
intermediate (50%) extended and fully retracted three speeds reverse.
capacities. 5th front jack with self-storing pad and
automatic first-retract. Drive
Outrigger Monitoring System comes standard (required
for North America and Canada). Maximum outrigger 8 x 4 x 4.
pad load: 46 176 kg (101,800 lb).

Steering
Outrigger controls
Front axles, single circuit, mechanical steering with
Located in the superstructure cab and on either side of the
hydraulic power assist. Turning radius: 13,7 m (45.1 ft).
carrier. Crane level indicator (sight bubble).

Axles
Engine - North America
Front: (2) beam-type steering axles, 2,12 m (83.4 in)
Cummins ISX 11.9 six cylinder, turbo charged and after track.
cooled diesel engine. 11.9 L (729 in3) 336 kW (450 bhp) Rear: (2) single reduction drive axles, 1,89 m (74.5 in)
at 1800 rpm. Maximum torque 2102 Nm (1550 lb-ft) at track. Inter-axle differential locks.
1400 rpm. 2013 “On Highway” EPA, Carb compliant. Brakes
Equipped with engine compression brake, audio-visual
engine distress system and ether start aid. S-cam, dual air split system operating on all wheels.
Fuel Requirement: Maximum of 15 ppm sulfur content Spring-applied, air released parking brake acting on rear
(Ultra Low Sulfur Diesel). Diesel exhaust fluid required. axles. Air dryer.

Grove TMS800E *Denotes optional equipment 5


Specifications
Suspension Miscellaneous standard equipment

Front: Walking beam with air bags and shock absorbers. Aluminum fenders with rear storage compartments;
Rear: Walking beam with air bags and shock absorbers. dual rear view mirrors; electronic back-up alarm;
sling/tool box; tire inflation kit; air cleaner restriction
indicator; headache ball stowage; aluminum wheels,
Tires event recorder. Hoist access platform. Crane Star asset
management system
Front: 445/65R 22.5 tubeless, mounted on aluminum
disc wheels.
Rear: 315/80R 22.5 tubeless, mounted on aluminum disc * Optional equipment
wheels, inner steel.
Auxiliary Lighting and Convenience Package:
Lights Includes amber strobe for superstructure and carrier
cab, dual boom base mounted floodlights and LMI
light bar.
Full lighting package including turn indicators, head, tail,
brake, and hazard warning lights. Hook blocks
Pintle hook (rear)
Cross axle differential locks
Cab Trailing Boom Package
Aluminum outrigger pads
One man design, aluminum fabricated with acoustical Counterweight Packages
lining and tinted safety glass throughout. Deluxe fabric Tow cable
covered seat with air adjustment. Complete driving Wind speed indicator
controls and engine instrumentation including tilt Winterfront radiator cover
telescope steering wheel, tachometer, speedometer,
voltmeter, water temp., oil pressure, fuel level, air pressure
gauge with A/V warning and engine high temp./low oil
pressure A/V warning. Other standard items include hot
water heater/defroster, electric windshield wash/wipe,
fire extinguisher, seat belt, door lock, air horn, and air
conditioning.

Electrical system

Four maintenance-free batteries provide 24 V electrical


system. Standard battery disconnect.

Maximum speed

104 km/h (65 mph)

Gradeability (theoretical)

70%

6 *Denotes optional equipment


Dimensions

R 13 981 (46’)
R 13 779 OUTSIDE R 4504 (15’) TAIL SWING
R 16 852 R 15 290 (45’) CURB
R 16 184
(55’) (53’) (50’) 28° TURNING CLEARANCE
RADIUS

R 16 460
(54’) 2312 7315
(7.58’) (24.00’)
2618 RET. FULLY
(8.59’)
OVERALL 2587 4700 EXT.
(8.49’) (15.42’)
CARRIER MID
MAX. EXT.

2117 1907
(6.94’) 32° R 9855 (32’) (6.26’)
FRONT INSIDE CURB REAR
TRACK CLEARANCE TRACK

15 182
(49.81’) 4498
12 600 (14.76’)
(41.34’ )
284 RET. 2200 964
(.93’) (7.22’) (3.16’)
ROTATION

3426
3398 (11.24’)
(11.15’)
497 2537
(1.63’) (8.32’)

1786
(5.86’)
318
16° (1.04’)
635 (2.08’) 20°
STROKE 155°
1524 1524 241 (.79’) 361
(5.00’) 873 (5.00’) (1.18’)
5639 (18.50’) (2.87’)
1264 2870 (9.42’) 508 (1.67’)
4013 2718 526 STROKE
(4.15’) 2641 (13.17’) (8.92’) (1.73’)
(8.66’) 11 391 (37.37’)

Note: Dimensions shown as mm (ft).

Unit configuration kg (lb) Front Rear Gross


Basic machine: Includes ISX11.9 2013 on-highway engine,
manual bi-fold swingaway, main and auxiliary hoists with
cable, aux boom nose, air conditioning in both cabs, 36,3 t 20 972 46,236 18 425 40,620 39 397 86,856
(40 USt) hook block at bumper, 10,9 t (12 USt) headache ball
stowed, 91 kg (200 lb) driver and no counterweight.
Add: 1814 kg (4000 lb) counterweight with pins on S/S -967 -2132 2787 6145 1822 4013
Add: 4536 kg (10,000 lb) counterweight with pins
(2722 kg [6000 lb] on deck/1814 kg [4000 lb] pinned to 1329 2931 3218 7095 4548 10,026
superstructure)
Add: 6350 kg (14,000 lb) counterweight with pins
(3629 kg [8000 lb] on deck/2722 kg [6000 lb] pinned to 1616 3563 4752 10,476 6368 14,039
superstructure)
Add: 8165 kg (18,000 lb) counterweight with pins (3629
kg [8000 lb] on deck/4536 kg [10,000 lb] pinned to 649 1431 7539 16,621 8188 18,052
superstructure)
Substitute:
Aluminum outrigger pads 0 -1 -32 -71 -33 -72
QSM11 off-highway engine in lieu of standard ISX11.9 -330 -728 49 108 -281 -620
Remove:
10 m - 17 m (33 ft - 56 ft) bifold swingaway -1365 -3010 166 365 -1200 -2645
36,3 t (40 USt) hook block -671 -1480 298 657 -373 -823
10,9 m (12 USt) headache ball -380 -838 122 270 -258 -568
Auxiliary hoist with cable 189 417 -525 -1,157 -336 -740
Air conditioning superstructure cab 13 29 -104 -229 -91 -200
Air conditioning chassis cab -32 -70 7 15 -25 -55

Maximum allowable 22 317 kg 49,200 lb 27 216 kg 60,000 lb 49 532 kg 109,200 lb


Michelin Tires 23 224 kg 51,200 lb 27 216 kg 60,000 lb 50 440 kg 111,200 lb

Grove TMS800E 7
Travel proposals

3620 mm
(11.9')
2423 mm
(7.9')

1524 mm 1384 mm
1524 mm (5') (4.5')
(5') 874 mm
CL (2.9') 4521 mm
Rotation (14.8')
5639 mm (18.5')
CL Wheelbase
Front bogie
757.21 mm
(63' -1 3/16")

Unit configuration kg (lb) Front Rear Dolly Gross


Basic machine: Includes ISX11.9 2013 on-highway
engine, manual bifold swingaway, main and auxiliary
hoists with cable, aux boom nose, air conditioning in
14 790 32,607 15 244 33,607 11 264 24,833 41 299 91,047
both cabs, 36,3 t (40 USt) hook block at bumper, 10,9 t
(12 USt) headache ball stowed, 91 kg (200 lb) driver, no
counterweight and 2812 kg (6200 lb) boom dolly.

Add: 3629 kg (8000 lb) counterweight with pins


stowed on carrier deck and 4536 kg (10,000 lb) 3065 39,365 576 34,875 4548 34,859 1820 109,099
counterweight with pins stowed on the boom dolly

Counterweight configurations

1814 kg (4000
Auxiliary hoistlb)
1361 kg 1814 kg (4000 lb) 1361 kg
(3000 lb) 1814 kg (4000 lb) (3000 lb)
2722 kg (6000 lb)

Load chart configurations


1814 kg (4000 lb) 2722 kg (6000 lb) 1361 kg (3000 lb)
0 kg (0 lb)
1814 kg (4000 lb) X
3629 kg (8000 lb) 2X
4536 kg (10,000 lb) X X
5443 kg (12,000 lb) 3X
6350 kg (14,000 lb) 2X X
8165 kg (18,000 lb ) 3X X
10 886 kg (24,000 lb) 3X X 2X

8
Working range

41.3 ft – 128 ft main boom + 33 ft – 56 ft lattice extension

(Boom deflection not shown)

220

210

200 0°
20° OFFSET 56' EXT
190 OFFSET
40°
OFFSET
180

33' EXT
170
(Boom deflection not shown)
160
220

150 210
70°

Boom length and extensions in feet


200 0°
140 128
Height from ground in feet

20° OFFSET 56' EXT


60° OFFSET
190
40°
130 OFFSET
120
180
°
50 33' EXT
120 170 110

160
110 100
150 40° °
70

Boom length and extensions in feet


100 140
90
128
Height from ground in feet

60°

130 120
90 80
50°
°
120 30 110
80 70
110 100
40°
70 100 90 60

90 80
60 20° 50
30°
80 70
50 41.3
70 60

40 60 20° 50
10° 41.3
78°
50
30 Max.
boom
40 angle
10° 78°
20 Max.
30
boom
angle
10 20 0°

10 0°
0
0
190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10
190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10
Axis of rotation Axis of rotation

Operating radius in feet from axis of rotation


Operating radius in feet from axis of rotation

3021
(9’-11”) Dimensions are for largest Grove furnished hook block
and overhaul ball, with anti-two block activated.

3021
(9’-11”) Dimensions are for largest Grove furnished hook block
and overhaul ball, with anti-two block activated.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 9
Working range

41.3 ft – 128 ft main boom + 33 ft – 56 ft lattice extension + 20 ft or 40 ft insert

240
0° OFFSET
230 20° OFFSET

220 40° OFFSET

210

200

190

180

170

160 240

Boom an dextgension length in feet


0° OFFSET
230 20° OFFSET
150 70°
220 40° OFFSET
140 128
60°
Height from ground in feet

210

130 200 120

190
50°
120 110
180

110 100
170
40°
100 160 90

Boom an dextgension length in feet


150 70°
90 80
140 128
60°
Height from ground in feet

30°
80 130 120 70
50°
120 110
70 60
110 100

60 20° 40 °
50
100 90

50 90 80 41.3
30°
80 70
40
70 10° 60
78° Max.
30 60 20° 50 boom angle

50 41.3
20
40
10°
10 0° 78° Max.
30 boom angle

0 20

220 210 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 Axis of rotation
10 0°

0
Axis of rotation
220 210 200 190 180 Operating
170 160 150radius
140 130in 120
feet110from
100axis
90 of
80rotation
70 60 50 40 30 20 10

Operating radius in feet from axis of rotation

3021 mm
[9’-11”] Dimensions are for largest Grove furnished hook block
and overhaul ball, with anti-two block activated.
3021 mm
[9’-11”] Dimensions are for largest Grove furnished hook block
and overhaul ball, with anti-two block activated.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
10 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 24,000 lb 100% 360°


24 ft 0 in spread
Pounds

Feet 41.3 50 60 ** 70 80 90 100 110 120 128


8 +160,000
(73)
++150,000 86,000
9 (71.5) (75)
147,000 86,000 86,000
10 (70) (74) (77)
130,500 86,000 86,000 41,000
12 (67) (71.5) (75) (77)
111,000 86,000 86,000 41,000 39,000
15
(62) (67.5) (71.5) (74.5) (76.5)
87,650 86,000 85,900 41,000 39,000 38,800 *38,700 *31,950
20
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
67,700 67,450 67,250 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
25
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
50,550 50,800 50,750 41,000 39,000 38,800 36,150 31,950 25,750 14,600
30
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
38,600 38,750 38,650 38,150 34,100 31,350 29,300 25,750 14,600
35
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
30,300 30,500 30,600 31,550 30,050 27,500 25,650 23,900 14,600
40
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
24,550 24,700 25,700 26,500 24,400 22,700 21,450 14,600
45
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
See 20,050 20,250 21,150 22,050 21,850 20,250 19,100 14,600
50
Note 16 (21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
16,750 17,650 18,500 19,300 18,200 17,100 14,600
55
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
13,950 14,800 15,650 16,450 16,450 15,450 14,600
60
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
12,450 13,300 14,150 14,550 14,000 13,350
65
(29) (40) (47) (52) (56) (59)
10,500 11,300 12,150 12,600 12,700 12,150
70
(18.5) (34) (42.5) (48.5) (53) (56)
9650 10,500 10,950 11,350 11,050
75
(27.5) (38) (45) (50) (53.5)
8220 9100 9530 9950 10,100
80
(17.5) (32.5) (41) (47) (50.5)
7870 8300 8710 9090
85
(26) (36.5) (43) (47.5)
6800 7220 7620 8000
90
(17) (31) (39.5) (44)
6260 6660 7030
95
(25) (35) (40.5)
5410 5810 6170
100
(16) (30) (36.5)
5040 5410
105
(24) (32)
4360 4720
110
(16) (27)
4090
115
(21)
3530
120
(10)

Minimum boom angle (°) for indicated length (no load) 9


Maximum boom length (ft) at 0° boom angle (no load) 120
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
+ Special equipment is required to lift this capacity.
++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram

Lifting capacities at zero degree boom angle


Boom Main boom length in feet
angle
41.3 50 60 **70 80 90 100 110 120
20,750 15,150 10,500 6700 5100 3900 2900 2000 1300

(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8)
Note: ( ) Reference radii in feet. A6-829-103890
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional platesmust be read and understood prior to operating the crane. 11
Load charts

41.3 ft - 128 ft 33 ft - 56 ft 24,000 lb 100% 360°


24 ft 0 in
NOTES:
Pounds
1.All capacities above the bold line are based on
33 ft LENGTH 56 ft LENGTH structural strength of boom extension and do
0° 20° 40° 0° 20° 40° not exceed 85% of tipping loads, in accordance
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
with SAE J-765.
35 *11,900
(78)
2.The 33 ft extension length may be used with
40 11,900 6060
(75.5) (77.5) single or double part line lifting service. The 56
45 11,900 *11,600 6060 ft extension length may be used for single line
(73.5) (78) (76) lifting service only.
50 11,900 10,600 *9700 6060
(71.5) (75) (78) (74.5)
11,900 9770 8470 6060 3.For main boom lengths less than 128 ft with
55 (70) (73) (75.5) (73) the boom extension erected, the rated loads are
11,000 9020 7920 6060 *6040
60 (68) (71) (73.5) (71) (78) determined by boom angle. Use only the column
10,000 8360 7430 6060 5900 which corresponds to the boom extension length
65 (66) (69.5) (72) (69.5) (75) and offset for which the machine is set up. For
70 9190 7780 6980 6060 5730 *4930 boom angles not shown, use rating of the next
(64) (67.5) (70) (68) (73.5) (78)
8460 7260 6580 6060 5330 4640 lower boom angle.
75 (62) (65.5) (68) (66) (71.5) (76)
80 7820 6790 6210 6040 4980 4370 4. WARNING: Operation of this machine with
(60) (63.5) (65.5) (64.5) (70) (74)
7250 6370 5870 5570 4650 4120 heavier loads than the capacities listed is
85 (58) (61) (63.5) (63) (68) (72) strictly prohibited. Machine tipping with boom
90 6740 5990 5560 5150 4360 3890 extension occurs rapidly and without advance
(55.5) (59) (61) (61) (66.5) (70)
warning.
95 6290 5640 5280 4780 4090 3680
(53.5) (56.5) (59) (59.5) (64.5) (68.5)
100 5880 5320 5020 4440 3840 3480 5.Boom angle is the angle above or below
(51) (54.5) (56.5) (57.5) (62.5) (66.5) horizontal of the longitudinal axis of the boom
5510 5030 4770 4130 3610 3300
105 (48.5) (52) (54) (55.5) (60.5) (64.5) base section after lifting rated load.
110 5170 4760 4550 3850 3400 3130
(46) (49.5) (51) (53.5) (58.5) (62.5) 6.Capacities listed are with outriggers properly
115 4780 4510 4340 3590 3200 2970 extended and vertical jacks set only.
(43.5) (46.5) (48.5) (52) (56.5) (60)
120 4200 4280 4150 3360 3020 2820
(40.5) (44) (45) (49.5) (54.5) (58) 7.When lifting over the main boom nose with 33
125 3660 3960 3140 2840 2680 ft or 56 ft extension erected, the outriggers must
(37.5) (41) (47.5) (52.5) (55.5)
3170 3420 2940 2690 2540 be fully extended or 50% extended (15 ft
130 (34) (37.5) (45.5) (50) (53) 5 in spread).
135 2710 2930 2760 2540 2420
(30.5) (34) (43) (48) (50.5)
2290 2470 2590 2400 2300
140 (26.5) (29.5) (40.5) (45) (47.5)
145 1910 2430 2270
(21.5) (38) (42.5)
150 1550 2100 2140
(14.5) (35) (39.5)
155 1770 2030
(31.5) (36)
160 1470 1770
(28) (32.5)
165 1180
(24)

Minimum boom
angle (°) for
indicated length 13 28 43.5 19 31.5 46
(no load)
Maximum boom
length (ft) at 0° 11 0 11 0
boom angle (no load)
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

A6-829-103892

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
12 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 33 ft - 56 ft 20 ft - 40 ft 24,000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based on
76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) structural strength of boom extension and do
0° 20° 40° 0° 20° 40°
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
not exceed 85% of tipping loads, in accordance
4850
with SAE J-765.
50
(77.5)
55
4850 3520 2.The 33 ft extension length may be used with
(76) (78)
4850 3520 single or double part line lifting service. The 56
60
(74.5) (77) ft extension length may be used for single line
4850 *5290 3520 lifting service only.
65
(73) (78) (75.5)
4850 4860 3520
70
(71.5) (76.5) (74) 3.For main boom lengths less than 128 ft with
4850 4470 3520 3740 the boom extension erected, the rated loads are
75
(70) (75) (72.5) (77)
4730 4110 4050 3520 3420 determined by boom angle. Use only the column
80
(68.5) (73.5) (77) (71.5) (75.5) which corresponds to the boom extension length
4310 3790 3500 3300 3100 *3250
85
(67) (72) (75.5) (70) (74.5) (78) and offset for which the machine is set up. For
3940 3500 3260 2970 2820 2720 boom angles not shown, use rating of the next
90
(65.5) (70) (73.5) (68.5) (73) (76) lower boom angle.
3610 3240 3030 2660 2560 2490
95
(63.5) (68.5) (72) (67) (71.5) (74.5)
3310 3000 2830 2390 2320 2270 4. WARNING: Operation of this machine with
100
(62) (67) (70.5) (65.5) (70) (73) heavier loads than the capacities listed is
3040 2770 2630 2140 2100 2070
105
(60.5) (65) (68.5) (64) (68.5) (71.5) strictly prohibited. Machine tipping with boom
2790 2570 2450 1920 1900 1890 extension occurs rapidly and without advance
110
(59) (63.5) (66.5) (62.5) (67) (70) warning.
2560 2370 2280 1710 1710 1710
115
(57) (61.5) (65) (61) (65.5) (68.5)
120
2350 2200 2120 1520 1540 1550 5.Boom angle is the angle above or below
(55.5) (60) (63) (59.5) (64) (66.5)
horizontal of the longitudinal axis of the boom
2160 2030 1970 1350 1380 1390
125 base section after lifting rated load.
(53.5) (58) (61) (58) (62.5) (65)
1990 1880 1830 1190 1230 1250
130
(52) (56.5) (59) (56.5) (60.5) (63.5)
6.Capacities listed are with outriggers properly
1820 1730 1700 1040 1080 1110
135 extended and vertical jacks set only.
(50) (54.5) (57) (55) (59) (61.5)
1670 1590 1570
140
(48) (52.5) (55)
7.When lifting over the main boom nose with
1530 1470 1450
145 33 ft or 56 ft extension erected, the outriggers
(46) (50.5) (52.5)
150
1400 1340 1340 must be fully extended or 50% extended (15 ft 5 in
(43.5) (48) (50.5)
1270 1230 1230
spread).
155
(41.5) (46) (48)
1160 1120 1130
160
(39) (43.5) (45)
1050 1020
165
(36.5) (40.5)

Minimum boom
angle (°) for
35 39 43.5 53.5 58 60.5
indicated
length (no load)
Maximum boom
length (ft) at 0° 70 70
boom angle (no load)
NOTE: ( ) Boom angles are in degrees.
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.
A6-829-103894

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 13
Load charts

41.3 ft - 128 ft 18,000 lb 100% 360°


24 ft 0 in
Pounds
Main boom length in feet
Feet 41.3 50 60 ** 70 80 90 100 110 120 128
+160,000
8
(73)
++150,000 86,000
9
(71.5) (75)
147,000 86,000 86,000
10
(70) (74) (77)
130,500 86,000 86,000 41,000
12
(67) (71.5) (75) (77)
111,000 86,000 86,000 41,000 39,000
15
(62) (67.5) (71.5) (74.5) (76.5)
87,650 86,000 85,900 41,000 39,000 38,800 *38,700 *31,950
20
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
63,700 63,750 63,300 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
25
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
45,450 45,650 45,600 41,000 39,000 38,800 36,150 31,950 25,750 14,600
30
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
34,450 34,550 34,500 35,450 34,100 31,350 29,300 25,750 14,600
35
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
26,800 27,000 27,100 28,050 28,950 27,500 25,650 23,900 14,600
40
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
21,550 21,700 22,650 23,500 24,350 22,700 21,450 14,600
45
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
17,450 17,600 18,550 19,450 20,200 20,250 19,100 14,600
50
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
14,400 15,300 16,150 16,950 17,300 17,100 14,600
55
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
11,800 12,700 13,500 14,350 14,750 15,100 14,600
60
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
10,550 11,350 12,200 12,600 13,000 13,350
65
(29) (40) (47) (52) (56) (59)
8760 9550 10,400 10,850 11,250 11,600
70
(18.5) (34) (42.5) (48.5) (53) (56)
8010 8890 9320 9740 10,100
75
(27.5) (38) (45) (50) (53.5)
6690 7580 8010 8430 8790
80
(17.5) (32.5) (41) (47) (50.5)
6450 6880 7290 7670
85
(26) (36.5) (43) (47.5)
5460 5880 6290 6670
90
(17) (31) (39.5) (44)
5000 5410 5780
95
(25) (35) (40.5)
4220 4620 4990
100
(16) (30) (36.5)
3920 4280
105
(24) (32)
3280 3650
110
(16) (27)
3080
115
(21)
2560
120
(10)
Minimum boom angle (°) for indicated length (no load) 9
Maximum boom length (ft) at 0° boom angle (no load) 120
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
+ Special equipment is required to lift this capacity.
++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle
Boom Main boom length in feet
angle 41.3 50 60 **70 80 90 100 110 120
20,750 15,150 10,500 6700 5100 3900 2900 2000 1300

(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8)
Note: ( ) Reference radii in feet. A6-829-103749
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
14 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 33 ft - 56 ft 18,000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based
33 ft LENGTH 56 ft LENGTH on structural strength of boom extension
0° 20° 40° 0° 20° 40° and do not exceed 85% of tipping loads, in
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
accordance with SAE J-765.
35 *11,900
(78) 2.The 33 ft extension length may be used
11,900 6060
40 (75.5) (77.5) with single or double part line lifting service.
11,900 *11,600 6060 The 56 ft extension length may be used for
45
(73.5) (78) (76) single line lifting service only.
11,900 10,600 *9700 6060
50
(71.5) (75) (78) (74.5)
11,900 9770 8470 6060 3.For main boom lengths less than 128 ft
55 (70) (73) (75.5) (73) with the boom extension erected, the rated
11,000 9020 7920 6060 *6040 loads are determined by boom angle. Use
60
(68) (71) (73.5) (71) (78)
10,000 8360 7430 6060 5900 only the column which corresponds to the
65
(66) (69.5) (72) (69.5) (75) boom extension length and offset for which
9190 7780 6980 6060 5730 *4930 the machine is set up. For boom angles not
70 (64) (67.5) (70) (68) (73.5) (78)
8460 7260 6580 6060 5330 4640
shown, use rating of the next lower boom
75 angle.
(62) (65.5) (68) (66) (71.5) (76)
80 7820 6790 6210 6040 4980 4370
(60) (63.5) (65.5) (64.5) (70) (74)
4. WARNING: Operation of this machine
7250 6370 5870 5570 4650 4120
85 (58) (61) (63.5) (63) (68) (72) with heavier loads than the capacities listed
90
6740 5990 5560 5150 4360 3890 is strictly prohibited. Machine tipping with
(55.5) (59) (61) (61) (66.5) (70) boom extension occurs rapidly and without
6290 5640 5280 4780 4090 3680
95
(53.5) (56.5) (59) (59.5) (64.5) (68.5) advance warning.
5750 5320 5020 4440 3840 3480
100 (51) (54.5) (56.5) (57.5) (62.5) (66.5) 5.Boom angle is the angle above or below
5020 5030 4770 4130 3610 3300
105
(48.5) (52) (54) (55.5) (60.5) (64.5) horizontal of the longitudinal axis of the
4360 4760 4550 3850 3400 3130 boom base section after lifting rated load.
110
(46) (49.5) (51) (53.5) (58.5) (62.5)
115 3760 4150 4340 3590 3200 2970 6.Capacities listed are with outriggers
(43.5) (46.5) (48.5) (52) (56.5) (60)
3220 3560 3840 3360 3020 2820
properly extended and vertical jacks set only.
120
(40.5) (44) (45) (49.5) (54.5) (58)
125 2710 3020 3140 2840 2680 7.When lifting over the main boom nose
(37.5) (41) (47.5) (52.5) (55.5)
2250 2520 2810 2690 2540
with 33 ft or 56 ft extension erected, the
130 (34) (37.5) (45.5) (50) (53) outriggers must be fully extended or 50%
135
1830 2070 2400 2540 2420 extended (15 ft 5 in spread).
(30.5) (34) (43) (48) (50.5)
140 1440 1640 2030 2400 2300
(26.5) (29.5) (40.5) (45) (47.5)
1080 1690 2110
145 (21.5) (38) (42.5)
1370 1730
150
(35) (39.5)
155 1070 1380
(31.5) (36)
1060
160
(32.5)
Minimum boom
angle (°) for 20 28 43.5 30 31.5 46
indicated
length (no load)
Maximum boom length
(ft) at 0° boom angle 110 100
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103771
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 15
Load charts

41.3 ft - 128 ft 56 ft 20 ft - 40 ft 18,000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based
76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) on structural strength of boom extension
0° 20° 40° 0° 20° 40° and do not exceed 85% of tipping loads, in
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET accordance with SAE J-765.
4850
50
(77.5) 2.The 56 ft extension length may be used for
4850 3520 single line lifting service only.
55
(76) (78)
4850 3520
60
(74.5) (77) 3.For main boom lengths less than 128 ft
65
4850 *5290 3520 with the boom extension erected, the rated
(73) (78) (75.5)
4850 4860 3520
loads are determined by boom angle. Use
70 only the column which corresponds to the
(71.5) (76.5) (74)
75
4850 4470 3520 3740 boom extension length and offset for which
(70) (75) (72.5) (77)
the machine is set up. For boom angles not
4730 4110 4050 3520 3420
80
(68.5) (73.5) (77) (71.5) (75.5) shown, use rating of the next lower boom
85
4310 3790 3500 3300 3100 *3250 angle.
(67) (72) (75.5) (70) (74.5) (78)
3940 3500 3260 2970 2820 2720
90
(65.5) (70) (73.5) (68.5) (73) (76) 4. WARNING: Operation of this machine with
3610 3240 3030 2660 2560 2490 heavier loads than the capacities listed is
95
(63.5) (68.5) (72) (67) (71.5) (74.5) strictly prohibited. Machine tipping with boom
3310 3000 2830 2390 2320 2270 extension occurs rapidly and without advance
100
(62) (67) (70.5) (65.5) (70) (73)
3040 2770 2630 2140 2100 2070 warning.
105
(60.5) (65) (68.5) (64) (68.5) (71.5)
2790 2570 2450 1920 1900 1890 5.Boom angle is the angle above or below
110
(59) (63.5) (66.5) (62.5) (67) (70)
2560 2370 2280 1710 1710 1710
horizontal of the longitudinal axis of the boom
115 base section after lifting rated load.
(57) (61.5) (65) (61) (65.5) (68.5)
2350 2200 2120 1520 1540 1550
120
(55.5) (60) (63) (59.5) (64) (66.5)
6.Capacities listed are with outriggers properly
2160 2030 1970 1350 1380 1390
125 extended and vertical jacks set only.
(53.5) (58) (61) (58) (62.5) (65)
1990 1880 1830 1190 1230 1250
130
(52) (56.5) (59) (56.5) (60.5) (63.5)
7.When lifting over the main boom nose
1820 1730 1700 1040 1080 1110
135
(50) (54.5) (57) (55) (59) (61.5) with 56 ft extension erected and inserts, the
140
1670 1590 1570 outriggers must be fully extended and vertical
(48) (52.5) (55) jacks set.
1530 1470 1450
145
(46) (50.5) (52.5)
1400 1340 1340
150
(43.5) (48) (50.5)
1160 1230 1230
155
(41.5) (46) (48)
1120 1130
160
(43.5) (45)
Minimum boom
angle (°) for
indicated length 39 40.5 43.5 53.5 58 60.5
(no load)
Maximum boom
length (ft) at 0° 70 70
boom angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103785
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
16 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft- 128 ft 14,000 lb 100% 360°


24 ft 0 in
Pounds
Main boom length in feet
Feet 41.3 50 60 **70 80 90 100 110 120 128
++150,000
8
(73)
++150,000 86,000
9
(71.5) (75)
145,500 86,000 86,000
10
(70) (74) (77)
129,000 86,000 86,000 41,000
12
(67) (71.5) (75) (77)
110,000 86,000 86,000 41,000 39,000
15
(62) (67.5) (71.5) (74.5) (76.5)
85,200 84,900 84,650 41,000 39,000 38,800 *38,700 *31,950
20
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
59,150 59,150 58,700 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
25
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
41,950 42,150 42,100 41,000 39,000 38,800 36,150 31,950 25,750 14,600
30
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
31,600 31,750 31,700 32,600 33,600 31,350 29,300 25,750 14,600
35
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
24,450 24,650 24,750 25,650 26,550 27,500 25,650 23,900 14,600
40
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
19,500 19,650 20,650 21,500 22,350 22,650 21,450 14,600
45
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
15,650 15,800 16,750 17,650 18,400 18,750 19,100 14,600
50
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
12,800 13,700 14,550 15,350 15,700 16,100 14,600
55
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
10,400 11,250 12,050 12,900 13,300 13,650 14,150
60
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
9240 10,050 10,900 11,300 11,700 12,100
65
(29) (40) (47) (52) (56) (59)
7550 8350 9220 9650 10,050 10,400
70
(18.5) (34) (42.5) (48.5) (53) (56)
6900 7780 8210 8630 8980
75
(27.5) (38) (45) (50) (53.5)
5660 6550 6980 7390 7760
80
(17.5) (32.5) (41) (47) (50.5)
5490 5910 6320 6700
85
(26) (36.5) (43) (47.5)
4560 4980 5380 5770
90
(17) (31) (39.5) (44)
4150 4550 4930
95
(25) (35) (40.5)
3420 3810 4190
100
(16) (30) (36.5)
3150 3520
105
(24) (32)
2560 2930
110
(16) (27)
2390
115
(21)
1900
120
(10)
Minimum boom angle (°) for indicated length (no load) 9
Maximum boom length (ft) at 0 deg. boom angle (no load) 120
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle
Boom Main boom length in feet
angle 41.3 50 60 **70 80 90 100 110 120
20,750 15,150 10,500 6700 5100 3900 2900 2000 1300

(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8)
Note: ( ) Reference radii in feet. A6-829-103750
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 17
Load charts

41.3 ft - 128 ft 33 ft - 56 ft 14,000 lb 100% 360°


24 ft 0 in

Pounds
NOTES:
1.All capacities above the bold line are based on
33 ft LENGTH 56 ft LENGTH structural strength of boom extension and do
0° 20° 40° 0° 20° 40° not exceed 85% of tipping loads, in accordance
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET with SAE J-765.
35 *11,900
(78) 2.The 33 ft extension length may be used with
40 11,900 6060 single or double part line lifting service. The 56
(75.5) (77.5)
11,900 *11,600 6060
ft extension length may be used for single line
45 (73.5) (78) (76) lifting service only.
50 11,900 10,600 *9700 6060
(71.5) (75) (78) (74.5)
3.For main boom lengths less than 128 ft with
55 11,900 9770 8470 6060
(70) (73) (75.5) (73) the boom extension erected, the rated loads
60
11,000 9020 7920 6060 *6040 are determined by boom angle. Use only
(68) (71) (73.5) (71) (78)
the column which corresponds to the boom
10,000 8360 7430 6060 5900
65 (66) (69.5) (72) (69.5) (75) extension length and offset for which the
70 9190 7780 6980 6060 5730 *4930 machine is set up. For boom angles not shown,
(64) (67.5) (70) (68) (73.5) (78) use rating of the next lower boom angle.
75 8460 7260 6580 6060 5330 4640
(62) (65.5) (68) (66) (71.5) (76)
7820 6790 6210 6040 4980 4370 4. WARNING: Operation of this machine with
80 (60) (63.5) (65.5) (64.5) (70) (74) heavier loads than the capacities listed is
85 7250 6370 5870 5570 4650 4120 strictly prohibited. Machine tipping with boom
(58) (61) (63.5) (63) (68) (72)
6570 5990 5560 5150 4360 3890 extension occurs rapidly and without advance
90 (55.5) (59) (61) (61) (66.5) (70) warning.
95 5710 5640 5280 4780 4090 3680
(53.5) (56.5) (59) (59.5) (64.5) (68.5)
4940 5320 5020 4440 3840 3480 5.Boom angle is the angle above or below
100 (51) (54.5) (56.5) (57.5) (62.5) (66.5) horizontal of the longitudinal axis of the boom
105 4250 4750 4770 4130 3610 3300 base section after lifting rated load.
(48.5) (52) (54) (55.5) (60.5) (64.5)
110 3630 4070 4410 3850 3400 3130
(46) (49.5) (51) (53.5) (58.5) (62.5) 6.Capacities listed are with outriggers properly
115 3070 3460 3760 3550 3200 2970 extended and vertical jacks set only.
(43.5) (46.5) (48.5) (52) (56.5) (60)
120 2550 2900 3170 3060 3020 2820
(40.5) (44) (45) (49.5) (54.5) (58) 7.When lifting over the main boom nose with
125 2080 2390 2610 2840 2680 33 ft or 56 ft extension erected, the outriggers
(37.5) (41) (47.5) (52.5) (55.5)
must be fully extended or 50% extended (15 ft
1650 1920 2200 2690 2540
130 (34) (37.5) (45.5) (50) (53) 5 in spread).
135 1250 1480 1820 2370 2420
(30.5) (34) (43) (48) (50.5)
140 1080 1470 1950 2220
(29.5) (40.5) (45) (47.5)
145 1150 1570
(38) (42.5)
150 1210
(39.5)
Minimum boom
angle (°) for 26.5 28.5 43.5 35 36 46
indicated length
(no load)
Maximum boom
length (ft) at 0° 110 90
boom angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103772
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
18 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 56 ft 20 ft - 40 ft 14,000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based
76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) on structural strength of boom extension
0° 20° 40° 0° 20° 40° and do not exceed 85% of tipping loads, in
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET accordance with SAE J-765.
4850
50
(77.5) 2.The 56 ft extension length may be used for
4850 3520 single line lifting service only.
55
(76) (78)
4850 3520
60
(74.5) (77) 3.For main boom lengths less than 128 ft.
4850 *5290 3520 with the boom extension erected, the rated
65
(73) (78) (75.5)
4850 4860 3520
loads are determined by boom angle. Use
70 only the column which corresponds to the
(71.5) (76.5) (74)
75
4850 4470 3520 3740 boom extension length and offset for which
(70) (75) (72.5) (77)
the machine is set up. For boom angles not
4730 4110 4050 3520 3420
80 shown, use rating of the next lower boom
(68.5) (73.5) (77) (71.5) (75.5)
85
4310 3790 3500 3300 3100 *3250 angle.
(67) (72) (75.5) (70) (74.5) (78)
3940 3500 3260 2970 2820 2720
90
(65.5) (70) (73.5) (68.5) (73) (76) 4. WARNING: Operation of this machine with
3610 3240 3030 2660 2560 2490 heavier loads than the capacities listed is
95
(63.5) (68.5) (72) (67) (71.5) (74.5) strictly prohibited. Machine tipping with boom
3310 3000 2830 2390 2320 2270
100
(62) (67) (70.5) (65.5) (70) (73) extension occurs rapidly and without advance
3040 2770 2630 2140 2100 2070 warning.
105
(60.5) (65) (68.5) (64) (68.5) (71.5)
2790 2570 2450 1920 1900 1890 5.Boom angle is the angle above or below
110
(59) (63.5) (66.5) (62.5) (67) (70)
2560 2370 2280 1710 1710 1710 horizontal of the longitudinal axis of the boom
115
(57) (61.5) (65) (61) (65.5) (68.5) base section after lifting rated load.
2350 2200 2120 1520 1540 1550 6.Capacities listed are with outriggers properly
120
(55.5) (60) (63) (59.5) (64) (66.5)
2160 2030 1970 1350 1380 1390
extended and vertical jacks set only.
125
(53.5) (58) (61) (58) (62.5) (65)
130
1990 1880 1830 1190 1230 1250 7.When lifting over the main boom nose
(52) (56.5) (59) (56.5) (60.5) (63.5)
with 56 ft extension erected and inserts, the
1820 1730 1700 1040 1080 1110
135 outriggers must be fully extended and vertical
(50) (54.5) (57) (55) (59) (61.5)
140
1600 1590 1570 jacks set.
(48) (52.5) (55)
1260 1470 1450
145
(46) (50.5) (52.5)
1340 1340
150
(48) (50.5)
1100 1230
155
(46) (48)
1020
160
(45)
Minimum boom
angle (°) for
indicated length 43.5 44.5 44 53.5 58 60.5
(no load)
Maximum boom
length (ft) at 0° 70 60
boom angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103786
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 19
Load charts

41.3 ft - 128 ft 12,000 lb 100% 360°


24 ft 0 in
Pounds
Main boom length in feet
Feet
41.3 50 60 **70 80 90 100 110 120 128
++150,000
8
(73)
++150,000 86,000
9
(71.5) (75)
145,000 86,000 86,000
10
(70) (74) (77)
128,500 86,000 86,000 41,000
12
(67) (71.5) (75) (77)
110,000 86,000 86,000 41,000 39,000
15
(62) (67.5) (71.5) (74.5) (76.5)
83,950 83,650 83,450 41,000 39,000 38,800 *38,700 *31,950
20
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
56,850 56,900 56,450 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
25
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
40,200 40,400 40,350 40,050 39,000 38,800 36,150 31,950 25,750 14,600
30
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
30,200 30,350 30,250 31,200 32,200 31,350 29,300 25,750 14,600
35
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
23,250 23,450 23,550 24,500 25,400 26,450 25,650 23,900 14,600
40
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
18,500 18,650 19,600 20,450 21,300 21,650 21,450 14,600
45
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
14,750 14,950 15,850 16,750 17,500 17,850 18,200 14,600
50
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
12,000 12,900 13,750 14,550 14,900 15,300 14,600
55
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
9680 10,500 11,350 12,200 12,550 12,950 13,450
60
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
8580 9400 10,250 10,650 11,050 11,450
65
(29) (40) (47) (52) (56) (59)
6950 7750 8620 9050 9460 9810
70
(18.5) (34) (42.5) (48.5) (53) (56)
6350 7230 7660 8080 8430
75
(27.5) (38) (45) (50) (53.5)
5140 6040 6460 6880 7240
80
(17.5) (32.5) (41) (47) (50.5)
5010 5430 5840 6220
85
(26) (36.5) (43) (47.5)
4110 4520 4930 5320
90
(17) (31) (39.5) (44)
3730 4120 4510
95
(25) (35) (40.5)
3020 3410 3790
100
(16) (30) (36.5)
2770 3140
105
(24) (32)
2190 2560
110
(16) (27)
2040
115
(21)
1570
120
(10)
Minimum boom angle (°) for indicated length (no load) 9
Maximum boom length (ft) at 0° boom angle (no load) 120
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
Lifting capacities at zero degree boom angle
Boom Main boom length in feet
angle 41.3 50 60 **70 80 90 100 110 120
20,750 15,150 10,500 6700 5100 3900 2900 2000 1300

(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8)
Note: ( ) Reference radii in feet. A6-829-103751
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
20 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 33 ft - 56 ft 12,000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1. All capacities above the bold line are based on
33 ft LENGTH 56 ft LENGTH structural strength of boom extension and do not
0° 20° 40° 0° 20° 40° exceed 85% of tipping loads, in accordance with
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET SAE J-765.
35 *11,900
(78) 2. The 33 ft extension length may be used with
11,900 6060 single or double part line lifting service. The 56 ft
40 (75.5) (77.5)
11,900 *11,600 6060 extension length may be used for single line lifting
45 (73.5) (78) (76) service only.
11,900 10,600 *9700 6060
50 (71.5) (75) (78) (74.5)
11,900 9770 8470 6060
3. For main boom lengths less than 128 ft with the
55 (70) (73) (75.5) (73) boom extension erected, the rated loads are
60 11,000 9020 7920 6060 *6040 determined by boom angle. Use only the column
(68) (71) (73.5) (71) (78)
which corresponds to the boom extension length
65 10,000 8360 7430 6060 5900
(66) (69.5) (72) (69.5) (75) and offset for which the machine is set up. For
70 9190 7780 6980 6060 5730 *4930 boom angles not shown, use rating of the next
(64) (67.5) (70) 68) (73.5) (78) lower boom angle.
75 8460 7260 6580 6060 5330 4640
(62) (65.5) (68) (66) (71.5) (76)
7820 6790 6210 6040 4980 4370 4. WARNING: Operation of this machine with
80 (60) (63.5) (65.5) (64.5) (70) (74) heavier loads than the capacities listed is strictly
7070 6370 5870 5570 4650 4120
85
(58) (61) (63.5) (63) (68) (72) prohibited. Machine tipping with boom extension
6120 5990 5560 5150 4360 3890 occurs rapidly and without advance warning.
90 (55.5) (59) (61) (61) (66.5) (70)
5280 5640 5280 4780 4090 3680 5. Boom angle is the angle above or below horizontal
95 (53.5) (56.5) (59) (59.5) (64.5) (68.5)
4540 5100 5020 4440 3840 3480 of the longitudinal axis of the boom base section
100
(51) (54.5) (56.5) (57.5) (62.5) (66.5) after lifting rated load.
105 3870 4360 4750 4130 3610 3300
(48.5) (52) (54) (55.5) (60.5) (64.5)
3270 3710 4050 3720 3400 3130
6. Capacities listed are with outriggers properly
110 (46) (49.5) (51) (53.5) (58.5) (62.5) extended and vertical jacks set only.
115 2720 3110 3420 3200 3200 2970
(43.5) (46.5) (48.5) (52) (56.5) (60)
7. When lifting over the main boom nose with 33 ft
2220 2570 2840 2730 3020 2820
120 (40.5) (44) (45) (49.5) (54.5) (58) or 56 ft extension erected, the outriggers must be
125 1760 2070 2290 2840 2680 fully extended or 50% extended (15 ft 5 in spread).
(37.5) (41) (47.5) (52.5) (55.5)
130 1340 1610 1900 2510 2540
(34) (37.5) (45.5) (50) (53)
135 1190 1530 2070 2410
(34) (43) (48) (50.5)
140 1190 1670 1940
(40.5) (45) (47.5)
145 1300
(42.5)
Minimum boom
angle (°) for
indicated 30.5 32.5 43.5 38 39.5 46
length (no load)
Maximum boom
length (ft) at 0° 100 90
boom angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103773
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 21
Load charts

41.3 ft - 128 ft 56 ft 20 ft - 40 ft 12,000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based
76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) on structural strength of boom extension
0° 20° 40° 0° 20° 40° and do not exceed 85% of tipping loads, in
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET accordance with SAE J-765.
4850
50
(77.5) 2.The 56 ft extension length may be used for
4850 3520 single line lifting service only.
55
(76) (78)
4850 3520
60
(74.5) (77) 3.For main boom lengths less than 128 ft
4850 *5290 3520 with the boom extension erected, the rated
65
(73) (78) (75.5)
4850 4860 3520
loads are determined by boom angle. Use
70 only the column which corresponds to the
(71.5) (76.5) (74)
75
4850 4470 3520 3740 boom extension length and offset for which
(70) (75) (72.5) (77)
the machine is set up. For boom angles not
4730 4110 4050 3520 3420
80 shown, use rating of the next lower boom
(68.5) (73.5) (77) (71.5) (75.5)
85
4310 3790 3500 3300 3100 *3250 angle.
(67) (72) (75.5) (70) (74.5) (78)
3940 3500 3260 2970 2820 2720
90
(65.5) (70) (73.5) (68.5) (73) (76) 4. WARNING: Operation of this machine
95
3610 3240 3030 2660 2560 2490 with heavier loads than the capacities listed
(63.5) (68.5) (72) (67) (71.5) (74.5) is strictly prohibited. Machine tipping with
3310 3000 2830 2390 2320 2270
100
(62) (67) (70.5) (65.5) (70) (73) boom extension occurs rapidly and without
3040 2770 2630 2140 2100 2070 advance warning.
105
(60.5) (65) (68.5) (64) (68.5) (71.5)
2790 2570 2450 1920 1900 1890 5.Boom angle is the angle above or below
110
(59) (63.5) (66.5) (62.5) (67) (70)
2560 2370 2280 1710 1710 1710 horizontal of the longitudinal axis of the
115
(57) (61.5) (65) (61) (65.5) (68.5) boom base section after lifting rated load.
2350 2200 2120 1520 1540 1550
120
(55.5) (60) (63) (59.5) (64) (66.5)
2160 2030 1970 1350 1380 1390 6.Capacities listed are with outriggers
125
(53.5) (58) (61) (58) (62.5) (65) properly extended and vertical jacks set only.
1990 1880 1830 1190 1230 1250
130
(52) (56.5) (59) (56.5) (60.5) (63.5)
7.When lifting over the main boom nose
1670 1730 1700 1040 1080 1110
135 (61.5) with 56 ft extension erected and inserts,
(50) (54.5) (57) (55) (59)
140
1320 1590 1570 the outriggers must be fully extended and
(48) (52.5) (55)
vertical jacks set.
1470 1450
145
(50.5) (52.5)
1170 1340
150
(48) (50.5)
1100
155
(48)
Minimum boom
angle (°) for 46 46 46.5 53.5 58 60.5
indicated length
(no load)
Maximum boom
length (ft) at 0° 70 60
boom angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103787
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
22 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 10,000 lb 100% 360°


24 ft 0 in
Pounds
Main boom length in feet
Feet
41.3 50 60 **70 80 90 100 110 120 128
8 ++150,000
(73)
9 ++150,000 86,000
(71.5) (75)
10 144,500 86,000 86,000
(70) (74) (77)
12 128,000 86,000 86,000 41,000
(67) (71.5) (75) (77)
15 109,500 86,000 86,000 41,000 39,000
(62) (67.5) (71.5) (74.5) (76.5)
20 82,700 82,400 82,200 41,000 39,000 38,800 *38,700 *31,950
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
25 54,550 54,600 54,150 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
30 38,450 38,650 38,600 38,300 39,000 38,800 36,150 31,950 25,750 14,600
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
35 28,800 28,950 28,850 29,800 30,750 31,350 29,300 25,750 14,600
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
40 22,100 22,300 22,400 23,300 24,200 25,250 25,500 23,900 14,600
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
45 17,500 17,650 18,600 19,450 20,300 20,600 20,900 14,600
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
50 13,850 14,050 14,950 15,850 16,600 16,950 17,300 14,600
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
55 11,200 12,100 12,950 13,750 14,100 14,500 14,600
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
60 8960 9810 10,650 11,450 11,850 12,250 12,700
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
65 7930 8740 9610 10,000 10,400 10,800
(29) (40) (47) (52) (56) (59)
70 6350 7140 8020 8450 8850 9210
(18.5) (34) (42.5) (48.5) (53) (56)
75 5790 6670 7100 7520 7870
(27.5) (38) (45) (50) (53.5)
80 4620 5520 5950 6360 6720
(17.5) (32.5) (41) (47) (50.5)
85 4520 4940 5350 5730
(26) (36.5) (43) (47.5)
90 3650 4070 4470 4870
(17) (31) (39.5) (44)
95 3300 3700 4080
(25) (35) (40.5)
100 2610 3000 3380
(16) (30) (36.5)
105 2390 2760
(24) (32)
110 1830 2200
(16) (27)
115 1700
(21)
120 1240
(10)
Mimimum boom angle (°) for indicated length (no load). 9
Maximum boom length (ft) for 0° boom angle (no load). 120
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram
Lifting capacities at zero degree boom angle
Boom Main boom length in feet
angle 41.3 50 60 **70 80 90 100 110 120
0° 20,750 15,150 10,500 6700 5100 3900 2900 2000 1300
(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8)
Note: ( ) Reference radii in feet. A6-829-103752
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 23
Load charts

41.3 ft - 128 ft 33 ft - 56 ft 10,000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based
33 ft LENGTH 56 ft LENGTH on structural strength of boom extension
0° 20° 40° 0° 20° 40° and do not exceed 85% of tipping loads, in
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET accordance with SAE J-765.
35 *11,900
(78) 2.The 33 ft extension length may be used with
40 11,900 6060 single or double part line lifting service. The
(75.5) (77.5)
11,900 *11,600 6060 56 ft extension length may be used for single
45 (73.5) (78) (76) line lifting service only.
50 11,900 10,600 *9700 6060
(71.5) (75) (78) (74.5)
11,900 9770 8470 6060
3.For main boom lengths less than 128 ft
55 (70) (73) (75.5) (73) with the boom extension erected, the rated
60
11,000 9020 7920 6060 *6040 loads are determined by boom angle. Use
(68) (71) (73.5) (71) (78)
only the column which corresponds to the
65 10,000 8360 7430 6060 5900
(66) (69.5) (72) (69.5) (75) boom extension length and offset for which
70 9190 7780 6980 6060 5730 *4930 the machine is set up. For boom angles not
(64) (67.5) (70) (68) (73.5) (78) shown, use rating of the next lower boom
8460 7260 6580 6060 5330 4640
75
(62) (65.5) (68) (66) (71.5) (76) angle.
80 7630 6790 6210 6040 4980 4370
(60) (63.5) (65.5) (64.5) (70) (74) 4. WARNING: Operation of this machine
85 6590 6370 5870 5570 4650 4120 with heavier loads than the capacities listed
(58) (61) (63.5) (63) (68) (72)
5670 5990 5560 5150 4360 3890 is strictly prohibited. Machine tipping with
90
(55.5) (59) (61) (61) (66.5) (70) boom extension occurs rapidly and without
4850 5480 5280 4780 4090 3680 advance warning.
95 (53.5) (56.5) (59) (59.5) (64.5) (68.5)
100 4130 4690 5020 4440 3840 3480
(51) (54.5) (56.5) (57.5) (62.5) (66.5) 5.Boom angle is the angle above or below
105 3480 3980 4360 3910 3610 3300 horizontal of the longitudinal axis of the
(48.5) (52) (54) (55.5) (60.5) (64.5)
boom base section after lifting rated load.
2900 3340 3690 3350 3400 3130
110 (46) (49.5) (51) (53.5) (58.5) (62.5)
115 2370 2760 3070 2850 3200 2970 6.Capacities listed are with outriggers
(43.5) (46.5) (48.5) (52) (56.5) (60)
properly extended and vertical jacks set only.
120 1890 2240 2510 2390 3020 2820
(40.5) (44) (45) (49.5) (54.5) (58)
1450 1760 1970 2670 2680 7.When lifting over the main boom nose with
125
(37.5) (41) (47.5) (52.5) (55.5) 33 ft or 56 ft extension erected, the outriggers
1040 1310 1590 2210 2540
130 (34) (37.5) (45.5) (50) (53) must be fully extended or 50% extended (15 ft
1240 1780 2110 5 in spread).
135 (43) (48) (50.5)
140 1390 1660
(45) (47.5)
1030
145 (42.5)
Minimum boom
angle (°) for 33 34 43.5 40.5 41.5 46
indicated length
(no load)
Maximum boom
length (ft) at 0° boom 100 80
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103774
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
24 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 56 ft 20 ft - 40 ft 10,000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based
76 ft (56 ft + 1 INSERT) 96 ft (56 ft + 2 INSERTS) on structural strength of boom extension
0° 20° 40° 0° 20° 40° and do not exceed 85% of tipping loads, in
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET accordance with SAE J-765.
4850
50
(77.5) 2.The 56 ft extension length may be used for
4850 3520
55
(76) (78) single line lifting service only.
4850 3520
60
(74.5) (77) 3.For main boom lengths less than 128 ft
4850 *5290 3520 with the boom extension erected, the rated
65
(73) (78) (75.5)
4850 4860 3520 loads are determined by boom angle. Use
70
(71.5) (76.5) (74) only the column which corresponds to the
75
4850 4470 3520 3740 boom extension length and offset for which
(70) (75) (72.5) (77)
4730 4110 4050 3520 3420
the machine is set up. For boom angles not
80 shown, use rating of the next lower boom
(68.5) (73.5) (77) (71.5) (75.5)
85
4310 3790 3500 3300 3100 *3250 angle.
(67) (72) (75.5) (70) (74.5) (78)
3940 3500 3260 2970 2820 2720
90
(65.5) (70) (73.5) (68.5) (73) (76) 4. WARNING: Operation of this machine
95
3610 3240 3030 2660 2560 2490 with heavier loads than the capacities listed
(63.5) (68.5) (72) (67) (71.5) (74.5) is strictly prohibited. Machine tipping with
3310 3000 2830 2390 2320 2270
100
(62) (67) (70.5) (65.5) (70) (73) boom extension occurs rapidly and without
3040 2770 2630 2140 2100 2070 advance warning.
105
(60.5) (65) (68.5) (64) (68.5) (71.5)
2790 2570 2450 1920 1900 1890 5.Boom angle is the angle above or below
110
(59) (63.5) (66.5) (62.5) (67) (70)
2560 2370 2280 1710 1710 1710 horizontal of the longitudinal axis of the
115
(57) (61.5) (65) (61) (65.5) (68.5) boom base section after lifting rated load.
2350 2200 2120 1520 1540 1550
120
(55.5) (60) (63) (59.5) (64) (66.5)
2150 2030 1970 1350 1380 1390
6.Capacities listed are with outriggers
125 properly extended and vertical jacks set only.
(53.5) (58) (61) (58) (62.5) (65)
1750 1880 1830 1190 1230 1250
130
(52) (56.5) (59) (56.5) (60.5) (63.5)
7.When lifting over the main boom nose
1380 1730 1700 1040 1080 1110
135
(50) (54.5) (57) (55) (59) (61.5) with 56 ft extension erected and inserts, the
140
1040 1590 1570 outriggers must be fully extended and vertical
(48) (52.5) (55) jacks set.
1240 1450
145
(50.5) (52.5)
1200
150
(50.5)
Minimum boom
angle (°) for
indicated length 46.5 48 48 54 58 60.5
(no load)
Maximum boom
length (ft) at 0° 70 60
boom angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103788
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

Grove TMS800E THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. 25
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 8000 lb 100% 360°


24 ft 0 in
Pounds
Main boom length in feet
Feet
41.3 50 60 **70 80 90 100 110 120 128
++150,000
8
(73)
++150,000 86,000
9
(71.5) (75)
143,500 86,000 86,000
10
(70) (74) (77)
127,500 86,000 86,000 41,000
12
(67) (71.5) (75) (77)
109,000 86,000 86,000 41,000 39,000
15
(62) (67.5) (71.5) (74.5) (76.5)
81,450 80,150 79,250 41,000 39,000 38,800 *38,700 *31,950
20
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
52,250 52,300 51,850 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
25
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
36,700 36,900 36,850 36,600 37,650 38,700 36,150 31,950 25,750 14,600
30
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
27,400 27,500 27,450 28,400 29,350 30,850 29,300 25,750 14,600
35
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
20,900 21,100 21,200 22,100 23,000 24,050 24,300 23,900 14,600
40
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
16,450 16,600 17,600 18,400 19,300 19,600 19,900 14,600
45
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
12,950 13,150 14,050 14,950 15,700 16,050 16,400 14,600
50
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
10,400 11,300 12,150 12,950 13,300 13,700 14,300
55
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
8240 9100 9930 10,750 11,150 11,500 12,000
60
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
7270 8090 8960 9360 9740 10,150
65
(29) (40) (47) (52) (56) (59)
5750 6540 7420 7850 8250 8610
70
(18.5) (34) (42.5) (48.5) (53) (56)
5230 6120 6550 6960 7310
75
(27.5) (38) (45) (50) (53.5)
4100 5000 5430 5840 6210
80
(17.5) (32.5) (41) (47) (50.5)
4040 4460 4870 5250
85
(26) (36.5) (43) (47.5)
3200 3620 4020 4420
90
(17) (31) (39.5) (44)
2870 3270 3660
95
(25) (35) (40.5)
2210 2600 2980
100
(16) (30) (36.5)
2000 2380
105
(24) (32)
1470 1840
110
(16) (27)
1350
115
(21)
Minimum boom angle (°) for indicated length (no load). 9
Maximum boom length (ft) at 0° boom angle (no load). 102
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram
Lifting capacities at zero degree boom angle
Boom Main boom length in feet
angle 41.3 50 60 **70 80 90 100 110 120
20,750 15,150 10,500 6700 5000 3540 2780 1870 1190

(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8) (112.8)
Note: ( ) Reference radii in feet. A6-829-103753
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

26 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 33 ft - 56 ft 8000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based on
33 ft LENGTH 56 ft LENGTH structural strength of boom extension and do not
0° 20° 40° 0° 20° 40° exceed 85% of tipping loads, in accordance with
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET SAE J-765.
35 *11,900
(78) 2.The 33 ft extension length may be used with
11,900 6060
40 (75.5) (77.5) single or double part line lifting service. The 56 ft
11,900 *11,600 6060 extension length may be used for single line lifting
45 (73.5) (78) (76) service only.
50 11,900 10,600 *9700 6060
(71.5) (75) (78) (74.5)
11,900 9770 8470 6060 3.For main boom lengths less than 128 ft with
55 (70) (73) (75.5) (73) the boom extension erected, the rated loads are
60 11,000 9020 7920 6060 *6040 determined by boom angle. Use only the column
(68) (71) (73.5) (71) (78)
10,000 8360 7430 6060 5900 which corresponds to the boom extension length
65
(66) (69.5) (72) (69.5) (75) and offset for which the machine is set up. For
70
9190 7780 6980 6060 5730 *4930 boom angles not shown, use rating of th next
(64) (67.5) (70) (68) (73.5) (78)
8280 7260 6580 6060 5330 4640
lower boom angle.
75 (62) (65.5) (68) (66) (71.5) (76)
80 7120 6790 6210 6040 4980 4370 4. WARNING: Operation of this machine with
(60) (63.5) (65.5) (64.5) (70) (74)
heavier loads than the capacities listed is strictly
6100 6370 5870 5570 4650 4120
85 (58) (61) (63.5) (63) (68) (72) prohibited. Machine tipping with boom extension
90 5210 5920 5560 5150 4360 3890 occurs rapidly and without advance warning.
(55.5) (59) (61) (61) (66.5) (70)
4430 5050 5280 4780 4090 3680
95 (53.5) (56.5) (59) (59.5) (64.5) (68.5) 5.Boom angle is the angle above or below
3730 4290 4720 4120 3840 3480 horizontal of the longitudinal axis of the boom
100 (51) (54.5) (56.5) (57.5) (62.5) (66.5) base section after lifting rated load.
105 3100 3600 3980 3530 3610 3300
(48.5) (52) (54) (55.5) (60.5) (64.5)
2540 2980 3320 2990 3400 3130 6.Capacities listed are with outriggers properly
110
(46) (49.5) (51) (53.5) (58.5) (62.5) extended and vertical jacks set only.
2030 2420 2720 2510 3200 2970
115 (43.5) (46.5) (48.5) (52) (56.5) (60)
1560 1910 2180 2060 2840 2820 7.When lifting over the main boom nose with 33 ft
120 (40.5) (44) (45) (49.5) (54.5) (58) or 56 ft extension erected, the outriggers must be
125 1130 1440 1660 2350 2680 fully extended or 50% extended (15 ft 5 in spread).
(37.5) (41) (47.5) (52.5) (55.5)
130 1010 1290 1900 2310
(37.5) (45.5) (50) (53)
135 1490 1820
(48) (50.5)
140 1110 1380
(45) (47.5)
Minimum boom
angle (°) for 36.5 36.5 4.35 43 44 46
indicated length
(no load)

Maximum boom 90 80
length (ft) at 0°
boom angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103775
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

Grove TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
27
Load charts

41.3 ft - 128 ft 56 ft 20 ft - 40 ft 8000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are
76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) based on structural strength of boom
0° 20° 40° 0° 20° 40° extension and do not exceed 85% of
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET tipping loads, in accordance with SAE
4850 J-765.
50 (77.5)
55 4850 3520 2.The 56 ft extension length may be used
(76) (78)
4850 3520 for single line lifting service only.
60 (74.5) (77)
65 4850 *5290 3520 3.For main boom lengths less than 128
(73) (78) (75.5)
4850 4860 3520
ft with the boom extension erected, the
70 (71.5) (76.5) (74) rated loads are determined by boom
75 4850 4470 3520 3740 angle. Use only the column which
(70) (75) (72.5) (77)
corresponds to the boom extension
4730 4110 4050 3520 3420
80 (68.5) (73.5) (77) (71.5) (75.5) length and offset for which the machine
85 4310 3790 3500 3300 3100 *3250 is set up. For boom angles not shown, use
(67) (72) (75.5) (70) (74.5) (78) rating of the next lower boom angle.
90 3940 3500 3260 2970 2820 2720
(65.5) (70) (73.5) (68.5) (73) (76)
3610 3240 3030 2660 2560 2490 4. WARNING: Operation of this machine
95 (63.5) (68.5) (72) (67) (71.5) (74.5) with heavier loads than the capacities
3310 3000 2830 2390 2320 2270
100 (62) (67) (70.5) (65.5) (70) (73) listed is strictly prohibited. Machine
3040 2770 2630 2140 2100 2070 tipping with boom extension occurs
105 (60.5) (65) (68.5) (64) (68.5) (71.5) rapidly and without advance warning.
2790 2570 2450 1920 1900 1890
110 (59) (63.5) (66.5) (62.5) (67) (70)
2560 2370 2280 1710 1710 1710 5.Boom angle is the angle above or below
115 (57) (61.5) (65) (61) (65.5) (68.5) horizontal of the longitudinal axis of the
120 2250 2200 2120 1520 1540 1550 boom base section after lifting rated load.
(55.5) (60) (63) (59.5) (64) (66.5)
1840 2030 1970 1350 1380 1390
125 (53.5) (58) (61) (58) (62.5) (65) 6.Capacities listed are with outriggers
130 1460 1880 1830 1190 1230 1250 properly extended and vertical jacks set
(52) (56.5) (59) (56.5) (60.5) (63.5)
only.
135 1110 1700 1700 1080 1110
(50) (54.5) (57) (59) (61.5)
140
1320 1570 7.When lifting over the main boom nose
(52.5) (55) with 56 ft extension erected and inserts,
1300
145 (52.5) the outriggers must be fully extended and
Minimum boom vertical jacks set.
angle (°) for 48.5 50.5 50.5 55 58 60.5
indicated length
(no load)
Maximum boom
length (ft) at 0° 60 60
boom angle (no load)

NOTE: ( ) Boom angles are in degrees. A6-829-103789


#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
28 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 4000 lb 100% 360°


24 ft 0 in
Pounds
Main b oom length in feet
Feet
41.3 50 60 **70 80 90 100 110 120 128
8 ++150,000
(73)
9 ++150,000 86,000
(71.5) (75)
10 142,500 86,000 86,000
(70) (74) (77)
12 126,500 86,000 86,000 41,000
(67) (71.5) (75) (77)
15 108,000 86,000 86,000 41,000 39,000
(62) (67.5) (71.5) (74.5) (76.5)
20 75,150 73,500 72,600 41,000 39,000 38,800 *38,700 *31,950
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
25 47,700 47,750 47,300 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
30 33,200 33,400 33,400 33,100 34,150 35,250 36,150 31,950 25,750 14,600
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
35 24,550 24,700 24,650 25,550 26,550 28,050 28,100 25,750 14,600
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
40 18,550 18,750 18,850 19,750 20,650 21,700 21,950 22,150 14,600
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
45 14,450 14,550 15,550 16,400 17,250 17,550 17,850 14,600
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
50 11,150 11,350 12,250 13,150 13,900 14,250 14,600 14,600
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
55 8830 9720 10,550 11,350 11,700 12,100 12,700
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
60 6800 7650 8490 9320 9710 10,050 10,550
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
65 5960 6770 7660 8040 8430 8840
(29) (40) (47) (52) (56) (59)
70 4540 5340 6220 6650 7050 7400
(18.5) (34) (42.5) (48.5) (53) (56)
75 4120 5010 5440 5850 6200
(27.5) (38) (45) (50) (53.5)
80 3070 3970 4400 4810 5170
(17.5) (32.5) (41) (47) (50.5)
85 3080 3500 3910 4280
(26) (36.5) (43) (47.5)
90 2300 2710 3110 3510
(17) (31) (39.5) (44)
95 2020 2420 2810
(25) (35) (40.5)
100 1400 1790 2170
(16) (30) (36.5)
105 1240 1580
(24) (32)
1050
110 (27)
Mimimum boom angle (°) for indicated length (no load). 23 26
Maximum boom length (ft) at 0° boom angle (no load). 110
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & S afety Handbook for reeving diagram
Lifting c apacities at zero degree boom angle
B oom Main b oom length in feet
a ngle 41.3 50 60 **70 80 90 100 110

0° 20,750 15,150 9680 5760 3850 2550 1900 1090


(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8) (102.8)
Note: ( ) Reference radii in feet. A6-829-103754
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

Grove TMS800E THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. 29
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 33 ft - 56 ft 4000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based on
33 ft LENGTH 56 ft LENGTH structural strength of boom extension and do not
0° 20° 40° 0° 20° 40° exceed 85% of tipping loads, in accordance with SAE
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET J-765.
35 *11,900
(78) 2.The 33 ft extension length may be used with ingle
40 11,900 6060 or double part line lifting service. The 56 ft extension
(75.5) (77.5)
11,900 *11,600 6060 length may be used for single line lifting service
45 (73.5) (78) (76) only.
50 11,900 10,600 *9700 6060
(71.5) (75) (78) (74.5)
11,900 9770 8470 6060
3.For main boom lengths less than 128 ft with
55 (70) (73) (75.5) (73) the boom extension erected, the rated loads are
60 11,000 9020 7920 6060 *6040 determined by boom angle. Use only the column
(68) (71) (73.5) (71) (78)
9930 8360 7430 6060 5900
which corresponds to the boom extension length
65 (66) (69.5) (72) (69.5) (75) and offset for which the machine is set up. For
70 8440 7780 6980 6060 5730 *4930 boom angles not shown, use rating of th next lower
(64) (67.5) (70) (68) (73.5) (78)
boom angle.
75 7170 7260 6580 6060 5330 4640
(62) (65.5) (68) (66) (71.5) (76)
80 6080 6790 6210 6040 4980 4370 4. WARNING: Operation of this machine with
(60) (63.5) (65.5) (64.5) (70) (74) heavier loads than the capacities listed is strictly
5140 5870 5870 5570 4650 4120
85 (58) (61) (63.5) (63) (68) (72) prohibited. Machine tipping with boom extension
90 4310 4970 5540 4900 4360 3890 occurs rapidly and without advance warning.
(55.5) (59) (61) (61) (66.5) (70)
3570 4180 4680 4160 4090 3680
95 (53.5) (56.5) (59) (59.5) (64.5) (68.5) 5.Boom angle is the angle above or below
2920 3480 3910 3470 3840 3480 horizontal of the longitudinal axis of the boom base
100 (51) (54.5) (56.5) (57.5) (62.5) (66.5) section after lifting rated load.
105 2340 2830 3220 2850 3610 3300
(48.5) (52) (54) (55.5) (60.5) (64.5)
1810 2250 2590 2300 3180 3130 6.Capacities listed are with outriggers properly
110 (46) (49.5) (51) (53.5) (58.5) (62.5) extended and vertical jacks set only.
115 1330 1720 2030 1820 2640 2970
(43.5) (46.5) (48.5) (52) (56.5) (60)
1240 1520 1400 2150 2740 7.When lifting over the main boom nose with 33 ft
120 (44) (45) (49.5) (54.5) (58) or 56 ft extension erected, the outriggers must be
125 1020 1710 2200 fully extended or 50% extended (15 ft 5 in spread).
(47.5) (52.5) (55.5)
130 1300 1700
(50) (53)
135 1240
(50.5)
Minimum boom
angle (°) for
indicated 40.5 42.5 43.5 46.5 48 49
length (no load)

Maximum boom
length (ft) at 0° 80 70
boom angle (no load)

NOTE: ( ) Boom angles are in degrees. A6-829-103776


#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

30 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 56 ft 20 ft- 40 ft 4000 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based on
76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) structural strength of boom extension and do
0° 20° 40° 0° 20° 40° not exceed 85% of tipping loads, in accordance
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET with SAE J-765.
50 4850
(77.5) 2.The 56 ft extension length may be used for
4850 3520 single line lifting service only.
55 (76) (78)
60 4850 3520
(74.5) (77) 3.For main boom lengths less than 128 ft with
65 4850 *5290 3520 the boom extension erected, the rated loads are
(73) (78) (75.5)
4850 4860 3520 determined by boom angle. Use only the column
70 (71.5) (76.5) (74) which corresponds to the boom extension
4850 4470 3520 3740 length and offset for which the machine is set
75 (70) (75) (72.5) (77)
4730 4110 4050 3520 3420
up. For boom angles not shown, use rating of
80 (68.5) (73.5) (77) (71.5) (75.5) the next lower boom angle.
85 4310 3790 3500 3300 3100 *3250
(67) (72) (75.5) (70) (74.5) (78)
3940 3500 3260 2970 2820 2720
4. WARNING: Operation of this machine with
90 (65.5) (70) (73.5) (68.5) (73) (76) heavier loads than the capacities listed is
95 3610 3240 3030 2660 2560 2490 strictly prohibited. Machine tipping with boom
(63.5) (68.5) (72) (67) (71.5) (74.5)
extension occurs rapidly and without advance
3310 3000 2830 2390 2320 2270
100 (62) (67) (70.5) (65.5) (70) (73) warning.
105 3040 2770 2630 2140 2100 2070
(60.5) (65) (68.5) (64) (68.5) (71.5)
5.Boom angle is the angle above or below
110 2580 2570 2450 1920 1900 1890
(59) (63.5) (66.5) (62.5) (67) (70) horizontal of the longitudinal axis of the boom
115 2070 2370 2280 1710 1710 1710 base section after lifting rated load.
(57) (61.5) (65) (61) (65.5) (68.5)
1600 2200 2120 1320 1540 1550
120 (55.5) (60) (63) (59.5) (64) (66.5) 6.Capacities listed are with outriggers properly
125 1180 1970 1970 1380 1390 extended and vertical jacks set only.
(53.5) (58) (61) (62.5) (65)
1510 1830 1230 1250
130 (56.5) (59) (60.5) (63.5) 7.When lifting over the main boom nose with
1090 1520 1110 56 ft extension erected and inserts, the
135 (54.5) (57) (61.5) outriggers must be fully extended and vertical
1130
140
(55)
jacks set.
Minimum boom
angle (°) for
indicated 52.5 53 53.5 58 59 60.5
length (no load)
Maximum boom
length (ft) at 0° 60 50
boom angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-103790
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

Grove TMS800E
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
31
Load charts

41.3 ft - 128 ft 0 lb 100% 360°


24 ft 0 in
Pounds
Main boom length in feet
Feet
41.3 50 60 **70 80 90 100 110 120 128
++150,000
8
(73)
++150,000 86,000
9
(71.5) (75)
141,500 86,000 86,000
10
(70) (74) (77)
125,500 86,000 86,000 41,000
12
(67) (71.5) (75) (77)
105,500 86,000 86,000 41,000 39,000
15
(62) (67.5) (71.5) (74.5) (76.5)
68,500 66,950 66,050 41,000 39,000 38,800 *38,700 *31,950
20
(53.5) (61) (66.5) (70) (73) (75) (78) (78)
43,100 43,150 42,700 41,000 39,000 38,800 38,700 31,950 *25,750 *14,600
25
(44) (54) (61) (65.5) (69) (71.5) (74) (75.5) (78) (78)
29,700 29,950 29,900 29,600 30,650 31,750 34,200 31,950 25,750 14,600
30
(31) (46.5) (55.5) (61) (65) (68.5) (70.5) (72.5) (74.5) (75.5)
21,750 21,850 21,800 22,750 23,700 25,200 25,550 25,750 14,600
35
(37) (49.5) (56.5) (61) (65) (67.5) (70) (72) (73)
16,150 16,350 16,450 17,400 18,250 19,350 19,800 20,250 14,600
40
(24) (42) (51) (57) (61) (64.5) (67.5) (69.5) (71)
12,400 12,550 13,500 14,350 15,200 15,650 16,150 14,600
45
(33.5) (45.5) (52.5) (57.5) (61.5) (64.5) (67) (68.5)
9390 9570 10,450 11,350 12,100 12,600 13,100 13,600
50
(21.5) (39) (47.5) (53.5) (58) (61.5) (64.5) (66)
7230 8120 8990 9770 10,200 10,700 11,100
55
(31.5) (42.5) (49.5) (54.5) (58.5) (62) (64)
5360 6210 7050 7880 8330 8790 9130
60
(20.5) (36.5) (45) (51) (55.5) (59) (61.5)
4640 5460 6340 6780 7210 7520
65
(29) (40) (47) (52) (56) (59)
3330 4130 5020 5480 5900 6200
70
(18.5) (34) (42.5) (48.5) (53) (56)
3000 3900 4340 4760 5080
75
(27.5) (38) (45) (50) (53.5)
2030 2940 3370 3780 4110
80
(17.5) (32.5) (41) (47) (50.5)
2110 2520 2920 3260
85
(26) (36.5) (43) (47.5)
1390 1780 2170 2510
90
(17) (31) (39.5) (44)
1130 1500 1820
95
(25) (35) (40.5)
1220
100
(36.5)
Mimimum boom angle (°) for indicated length (no load). 24 29 35
Maximum boom length (ft) at 0° boom angle (no load). 100
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
++9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram
Lifting capacities at zero degree boom angle
Boom Main boom length in feet
angle 41.3 50 60 **70 80 90 110
20,750 13,750 8000 4390 2690 1550 1030

(34.1) (42.8) (52.8) (63) (72.8) (82.8) (92.8)
Note: ( ) Reference radii in feet. A6-829-103755
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
32 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 33 ft - 56 ft 0 lb 100% 360°


24 ft 0 in

Pounds NOTES:
1.All capacities above the bold line are based on
33 ft LENGTH 56 ft LENGTH structural strength of boom extension and do
Feet
0° 20° 40° 0° 20° 40° not exceed 85% of tipping loads, in accordance
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
with SAE J-765.
*11,900
35
(78)
2.The 33 ft extension length may be used with
11,900 6060
40 (75.5) (77.5) single or double part line lifting service. The 56
45 11,900 *11,600 6060 ft extension length may be used for single line
(73.5) (78) (76)
lifting service only.
11,900 10,600 *9700 6060
50
(71.5) (75) (78) (74.5)
55
11,900 9770 8470 6060 3.For main boom lengths less than 128 ft with
(70) (73) (75.5) (73) the boom extension erected, the rated loads are
10,050 9020 7920 6060 *6040
60
(68) (71) (73.5) (71) (78) determined by boom angle. Use only the column
8410 8360 7430 6060 5900 which corresponds to the boom extension
65 (66) (69.5) (72) (69.5) (75) length and offset for which the machine is set
70 7010 7640 6980 6060 5730 *4930 up. For boom angles not shown, use rating of th
(64) (67.5) (70) (68) (73.5) (78)
5840 6460 6580 6030 5330 4640 next lower boom angle.
75
(62) (65.5) (68) (66) (71.5) (76)
4840 5440 6070 5110 4980 4370 4. WARNING: Operation of this machine with
80 (60) (63.5) (65.5) (64.5) (70) (74)
3980 4560 5120 4310 4650 4120 heavier loads than the capacities listed is
85
(58) (61) (63.5) (63) (68) (72) strictly prohibited. Machine tipping with boom
90
3230 3780 4290 3610 4360 3890 extension occurs rapidly and without advance
(55.5) (59) (61) (61) (66.5) (70)
2570 3100 3560 3000 4000 3680
warning.
95
(53.5) (56.5) (59) (59.5) (64.5) (68.5)
100
1990 2490 2910 2440 3380 3480 5.Boom angle is the angle above or below
(51) (54.5) (56.5) (57.5) (62.5) (66.5)
horizontal of the longitudinal axis of the boom
1460 1940 2320 1950 2810 3300
105 (48.5) (52) (54) (55.5) (60.5) (64.5) base section after lifting rated load.
110 1440 1740 1510 2310 2920
(49.5) (51) (53.5) (58.5) (62.5) 6.Capacities listed are with outriggers properly
1220 1100 1850 2380
115
(48.5) (52) (56.5) (60) extended and vertical jacks set only.
1430 1900
120 (54.5) (58) 7.When lifting over the main boom nose with 33
125 1040 1460 ft or 56 ft extension erected, the outriggers must
(52.5) (55.5)
1020 be fully extended or 50% extended (15 ft
130
(53) 5 in spread).
Minimum boom
angle (°) for
indicated length 46 46.5 47.5 51 51.5 52
(no load)
Maximum boom
length (ft) at 0° 70 60
boom angle (no load)

NOTE: ( ) Boom angles are in degrees. A6-829-103777


#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

Grove TMS800E THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. 33
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts

41.3 ft - 128 ft 56 ft 20 ft - 40 ft 0 100% 360°


24 ft 0 in
NOTES:
Pounds
1.All capacities above the bold line are based
76 ft (56 ft LENGTH + 1 INSERT) 96 ft (56 ft LENGTH + 2 INSERTS) on structural strength of boom extension
0° 20° 40° 0° 20° 40°
and do not exceed 85% of tipping loads, in
Feet OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET accordance with SAE J-765.
4850
50 2.The 56 ft extension length may be used for
(77.5)
55
4850 3520 single line lifting service only.
(76) (78)
4850 3520
60
(74.5) (77) 3.For main boom lengths less than 128 ft
65
4850 *5290 3520 with the boom extension erected, the rated
(73) (78) (75.5) loads are determined by boom angle. Use
4850 4860 3520
70
(71.5) (76.5) (74) only the column which corresponds to the
4850 4470 3520 3740 boom extension length and offset for which
75
(70) (75) (72.5) (77) the machine is set up. For boom angles not
4730 4110 4050 3520 3420
80
(68.5) (73.5) (77) (71.5) (75.5)
shown, use rating of the next lower boom
4310 3790 3500 3300 3100 *3250 angle.
85
(67) (72) (75.5) (70) (74.5) (78)
3700 3500 3260 2970 2820 2720 4. WARNING: Operation of this machine
90
(65.5) (70) (73.5) (68.5) (73) (76)
3100 3240 3030 2660 2560 2490 with heavier loads than the capacities listed
95
(63.5) (68.5) (72) (67) (71.5) (74.5) is strictly prohibited. Machine tipping with
100
2560 3000 2830 2390 2320 2270 boom extension occurs rapidly and without
(62) (67) (70.5) (65.5) (70) (73)
2080 2770 2630 1920 2100 2070
advance warning.
105
(60.5) (65) (68.5) (64) (68.5) (71.5)
110
1640 2410 2450 1460 1900 1890 5.Boom angle is the angle above or below
(59) (63.5) (66.5) (62.5) (67) (70)
horizontal of the longitudinal axis of the
1240 1980 2280 1030 1710 1710
115
(57) (61.5) (65) (61) (65.5) (68.5) boom base section after lifting rated load.
1580 2050 1490 1550
120
(60) (63) (64) (66.5) 6.Capacities listed are with outriggers
1210 1640 1080 1390
125
(58) (61) (62.5) (65) properly extended and vertical jacks set only.
1260 1250
130
(59) (63.5) 7.When lifting over the main boom nose
Minimum boom with 56 ft extension erected and inserts,
angle (°) for
indicated length 55.5 56.5 57 60 61.5 61.5 the outriggers must be fully extended and
(no load) vertical jacks set.
Maximum boom
length (ft) at 0° 60 50
boom angle (no load)

NOTE: ( ) Boom angles are in degrees. A6-829-103791


#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

34 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Working range - Metric 85%

12,6 m - 39 m main boom + 10 m - 17 m lattice extension

(Boom deflection not shown)


60 0° OFFSET 17,0 m EXT
20° OFFSET
40° OFFSET
55
10,0 m EXT
50

45 70°

Boom length and extensions in meters


39,0
60°
40 36,6
Height from ground in meters

50° 33,5
35
30,5
40°
27,4
30
24,4
25 30° 21,4
18,3
20
20° 15,2
12,6
15

10°
10
78°
Max boom
5 angle

0
55 50 45 40 35 30 25 20 15 10 5 Axis of rotation
Operating radius in meters from axis of rotation

Dimensions are for largest Grove


furnished hook block and overhaul ball,
with anti-two block activated.
3 m 2 cm

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 35
Working range - Metric 85%

12,6 m - 39 m main boom + 10 m - 17 m lattice extension and two inserts

(Boom deflection not shown)


75
0° OFFSET
20° OFFSET 29,2 m EXT
70
40° OFFSET
65

60

55
Height from ground in meters

50

45 70°

Boom length and extensions in meters


39,0
60°
40 36,6
50° 33,5
35
30,5
40° 27,4
30
24,4
25 30° 21,4
18,3
20
20° 15,2
12,6
15

10 10°
78°
Max boom
5 angle

0
70 65 60 55 50 45 40 35 30 25 20 15 10 5 Axis of rotation
Operating radius in meters from axis of rotation

Dimensions are for largest Grove


furnished hook block and overhaul ball,
with anti-two block activated.

3 m 2 cm

36 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%
ON OUTRIGGERS FULLY EXTENDED - 360°

12,6 m - 39,0 m 10 886 kg 100% 360°


7,3 m

#0601
Radius
in Main boom length in meters
meters
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6 39,0
++70 000
2,5
(73)
+66 875 39 000 39 000
3
(70,5) (74) (77)
61 125 39 000 39 000 18 575
3,5
(68) (72) (75,5) (77,5)
55 875 39 000 39 000 18 575 *17 675
4
(65) (70) (73,5) (76) (78)
51 025 39 000 39 000 18 575 17 675
4,5
(62,5) (68) (72) (75) (77)
47 350 39 000 38 975 18 575 17 675 *17 575
5
(60) (66) (70,5) (73,5) (75,5) (78)
40 375 39 000 38 950 18 575 17 675 17 575 *17 550
6
(54,5) (61,5) (67) (70,5) (73) (75,5) (78)
34 375 33 950 33 925 18 575 17 675 17 575 17 550 *14 475 *11 675
7
(48) (57) (63,5) (67,5) (70,5) (73) (75) (78) (78)
29 225 29 275 29 100 18 575 17 675 17 575 17 250 14 475 11 675 *6620
8
(41) (52,5) (60) (64,5) (68) (71) (73) (74,5) (76) (78)
23 600 23 700 23 650 18 575 17 675 17 575 16 500 14 475 11 675 6620
9
(32,5) (47) (56) (61,5) (65,5) (68,5) (71) (73) (74,5) (75,5)
14 625 19 650 19 700 18 575 17 450 16 400 15 150 13 800 11 675 6620
10
(20) (41,5) (52) (58,5) (63) (66,5) (69) (71) (73) (74)
14 150 14 250 14 275 14 700 13 825 12 650 11 800 10 925 6620
12
(26) (43) (52) (57,5) (61,5) (65) (67,5) (69,5) (71)
10,725 10 800 11 225 11 600 10 825 10 075 9530 6620
14
(31,5) (44,5) (51,5) (57) (61) (64) (66,5) (68)
See 5360 8355 8765 9170 9425 8720 8210 6620
16
Note 16 (10) (35,5) (45) (51,5) (56,5) (60) (63) (65)
6555 6945 7330 7700 7610 7145 6620
18
(23) (37,5) (46) (51,5) (56) (59,5) (62)
5545 5915 6300 6490 6275 5985
20
(28) (39,5) (46,5) (51,5) (56) (58,5)
3010 4795 5185 5385 5540 5290
22
(11) (31,5) (40,5) (47) (52) (55)
3880 4285 4480 4670 4690
24
(20,5) (34) (42) (47,5) (51)
3540 3735 3920 4095
26
(25,5) (36) (43) (47)
2035 3105 3290 3460
28
(11) (29) (38) (43)
2570 2750 2920
30
(19,5) (31,5) (38)
2290 2455
32
(24) (32,5)
1330 2050
34
(11,5) (25,5)
1695
36
(15)
Minimum boom angle (deg.) for indicated length (no load) 9
Maximum boom length (m) at 0 deg. boom angle (no load) 36,6
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
++9 parts of line of Flex-X35 cable only required to lift this capacity (using aux. boom nose).
+9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle

Boom Main boom length in meters


angle
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6
9410 6870 4760 3035 2310 1765 1315 905 590

(10,4) (13) (16,1) (19,2) (22,2) (25,2) (28,3) (31,3) (34,4)
Note: ( ) Reference radii in meters. A6-829-10390 5
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 37
Load charts - Metric 85%

NOTES:
1.All capacities above the bold line are
12,6 m - 39,0 m 10,0 m - 17,0 m 10 886 kg 100% 360°
7,3 m based on structural strength of boom
extension and do not exceed 85% of
10,0 m LENGTH 17,0 m LENGTH
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40° J-765.
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0621 #0622 #0623 #0641 #0642 #0643
2.The 10,0 m and 17,0 m extension
10
*5395 lengths may be used for single line
(78) lifting service only.
5395 *2745
12
(75,5) (78)
3.For main boom lengths less than 39,0
5395 5175 2745
14 m with the boom extension erected,
(73) (76,5) (75,5)
the rated loads are determined by boom
5395 4620 *4400 2745
16
(70,5) (74) (78) (73,5) angle. Use only the column which
5065 4155 3640 2745 *2740
corresponds to the boom extension
18 length and offset for which the machine
(68) (71,5) (74) (71,5) (78)
4490 3760 3345 2745 2665 is set up. For boom angles not shown,
20 use rating of the next lower boom
(65,5) (69) (71,5) (69,5) (75)
4020 3420 3085 2745 2520 *2235 angle.
22
(63) (66,5) (69) (67) (72,5) (78)
3620 3130 2855 2740 2295 2010 4. WARNING: Operation of this
24
(60,5) (64) (66) (65) (70,5) (74,5) machine with heavier loads than the
26
3275 2875 2650 2515 2100 1860 capacities listed is strictly prohibited.
(57,5) (61) (63,5) (63) (68) (72) Machine tipping with boom extension
2 980 2655 2475 2270 1930 1725 occurs rapidly and without advance
28
(55) (58) (60,5) (60,5) (65,5) (69,5)
warning.
2725 2455 2,310 2060 1775 1605
30
(51,5) (55) (57) (58) (63) (67)
5.Boom angle is the angle above or
2500 2280 2,160 1870 1635 1495
32
(48,5) (52) (54) (55,5) (60,5) (64,5)
below horizontal of the longitudinal
axis of the boom base section after
2300 2120 2030 1710 1510 1,395
34 lifting rated load.
(45) (48,5) (50,5) (53) (58) (61,5)
2000 1980 1915 1560 1400 1305
36 6.Capacities listed are with outriggers
(41,5) (45) (46,5) (50,5) (55,5) (58,5)
1675 1810 1430 1290 1220 properly extended and vertical jacks set
38
(37.5) (41) (47,5) (52,5) (55,5) only.
1385 1495 1310 1200 1135
40
(33,5) (36,5) (45) (49,5) (52,5) 7.When lifting over the main boom nose
42
1,125 1210 1205 1115 1065 with 10,0 m or 17,0 m extension erected,
(28,5) (31,5) (41,5) (46,5) (49) the outriggers must be fully extended or
885 1110 1035 50% extended (4,7 m spread).
44
(22) (38) (43)
925 960
46
(34,5) (39)
735 880
48
(30) (34,5)
560
50
(25)
Minimum boom angle
(°) for indicated length 13 28 43.5 19 31,5 46
(no load)
Maximum boom length
(m) at 0° boom angle 33,5 33,5
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10390 7
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

38 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

NOTES:
1.All capacities above the bold line are
12,6 m - 39,0 m 10,0 m - 17,0 m 6,1 m - 12,2 m 10 886 kg 100% 360°
7,3 m based on structural strength of boom
extension and do not exceed 85% of
23,1 m (17,0 m LENGTH + 1 INSERT) 29,2 m (17,0 m LENGTH + 2 INSERTS) tipping loads, in accordance with SAE
Radius J-765.
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0684 #0685 #0686 #0684 #0685 #0686 2.The 17,0 m extension lengths may be
used for single line lifting service only.
2200
16
(77)
3.For main boom lengths less than
2200 1595
18 39,0 m with the boom extension
(75) (77)
erected, the rated loads are
2200 *2400 1595
20 determined by boom angle. Use only
(73) (78) (75,5)
the column which corresponds to the
2200 2125 1595 *1695
22 boom extension length and offset
(71) (76) (73,5) (78)
for which the machine is set up. For
2155 1905 *1835 1595 1585
24
(69) (74) (78) (71,5) (76) boom angles not shown, use rating of
the next lower boom angle.
1945 1710 1580 1485 1395 *1470
26
(67) (71,5) (75,5) (70) (74) (78)
4. WARNING: Operation of this
1730 1540 1440 1295 1235 1195
28
(65) (69,5) (73) (68) (72,5) (75,5)
machine with heavier loads than the
capacities listed is strictly prohibited.
1540 1395 1310 1120 1085 1060
30
(62,5) (67,5) (71) (66) (70,5) (73,5)
Machine tipping with boom extension
occurs rapidly and without advance
1375 1255 1190 970 950 935
32
(60,5) (65) (68,5) (64) (68,5) (71,5)
warning.
1230 1135 1085 840 835 830
34
(58,5) (63) (66) (62) (66,5) (69,5)
5.Boom angle is the angle above or
below horizontal of the longitudinal
1100 1025 985 720 725 730
36 axis of the boom base section after
(56) (60,5) (63,5) (60) (64,5) (67,5)
lifting rated load.
985 925 895 615 630 635
38
(54) (58,5) (61) (58) (62,5) (65)
6.Capacities listed are with outriggers
880 835 815 520 540 550
40 properly extended and vertical jacks
(51,5) (56) (58,5) (56) (60) (63)
set only.
785 745 735
42
(49) (53,5) (56)
7.When lifting over the main boom
700 670 665
44 nose with 17,0 m extension erected
(46) (50,5) (53)
and inserts, the outriggers must be
620 595 595
46 fully extended or 50% extended and
(43) (47,5) (50)
vertical jacks set.
550 530 535
48
(40) (44,5) (46,5)
Minimum boom angle
(°) for indicated length 35 39 43.5 53.5 58 60.5
(no load)
Maximum boom
length (m) at 0° boom 21,4 21,4
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10390 9
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 39
Load charts ON- OUTRIGGERS
Metric 85%
FULLY EXTENDED - 360°

12,6 m - 39,0 m 8165 kg 100% 360°


7,3 m

#0001
Radius
in Main boom length in meters
meters
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6 39,0
++70 000
2,5
(73)
+66 875 39 000 39 000
3
(70,5) (74) (77)
61 150 39 000 39 000 18 575
3,5
(68) (72) (75,5) (77,5)
55 975 39 000 39 000 18 575 *17 675
4
(65) (70) (73,5) (76) (78)
51 225 39 000 39 000 18 575 17 675
4,5
(62,5) (68) (72) (75) (77)
47 500 39 000 38 975 18 575 17 675 *17 575
5
(60) (66) (70,5) (73,5) (75,5) (78)
40 400 39 000 38 950 18 575 17 675 17 575 *17 550
6
(54,5) (61,5) (67) (70,5) (73) (75,5) (78)
33 950 33 850 33 600 18 575 17 675 17 575 17 550 *14 475 *11 675
7
(48) (57) (63,5) (67,5) (70,5) (73) (75) (78) (78)
26 375 26 450 26 275 18 575 17 675 17 575 17 250 14 475 11,675 *6620
8
(41) (52,5) (60) (64,5) (68) (71) (73) (74,5) (76) (78)
21 225 21 300 21 250 18 575 17 675 17 575 16 500 14 475 11 675 6620
9
(32,5) (47) (56) (61,5) (65,5) (68,5) (71) (73) (74,5) (75,5)
14 000 17 575 17 625 17 550 17 450 16 400 15 150 13 800 11 675 6620
10
(20) (41,5) (52) (58,5) (63) (66,5) (69) (71) (73) (74)
12 550 12 625 12 675 13 075 13 500 12 650 11 800 10 925 6620
12
(26) (43) (52) (57,5) (61,5) (65) (67,5) (69,5) (71)
See 9405 9470 9905 10 275 10 650 10 075 9530 6620
14
Note 16 (31,5) (44,5) (51,5) (57) (61) (64) (66,5) (68)
5220 7230 7640 8040 8385 8550 8210 6620
16
(10) (35.5) (45) (51, 5) (56,5) (60) (63) (65)
5575 5965 6350 6720 6890 7065 6620
18
(23) (37,5) (46) (51,5) (56) (59,5) (62)
4680 5045 5440 5625 5800 5980
20
(28) (39,5) (46,5) (51,5) (56) (58,5)
2800 4015 4410 4610 4800 4955
22
(11) (31,5) (40,5) (47) (52) (55)
3180 3580 3775 3965 4130
24
(20,5) (34) (42) (47,5) (51)
2900 3090 3275 3450
26
(25,5) (36) (43) (47)
1795 2515 2695 2870
28
(11) (29) (38) (43)
2025 2205 2370
30
(19,5) (31,5) (38)
1775 1945
32
(24) (32,5)
1075 1570
34
(11,5) (25,5)
1245
36
(15)
Minimum boom angle (deg.) for indicated length (no load) 9
Maximum boom length (m) at 0 deg. boom angle (no load) 36,6
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
++9 parts of line of Flex-X35 cable only required to lift this capacity (using aux. boom nose).
+9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle

Boom Main boom length in meters


angle
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6
9430 6875 4770 3035 2310 1765 1315 905 590

(10,4) (13) (16,1) (19,2) (22,2) (25,2) (28,3) (31,3) (34,4)
Note: ( ) Reference radii in meters. A6-829-10381 3
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

40 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

NOTES:
1.All capacities above the bold line are
12,6 m - 39,0 m 10,0 m - 17,0 m 8165 kg 100% 360°
7,3 m based on structural strength of boom
extension and do not exceed 85% of
10,0 m LENGTH 17,0 m LENGTH tipping loads, in accordance with SAE
Radius
0° 20° 40° 0° 20° 40° J-765.
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0021 #0022 #0023 #0041 #0042 #0043 2.The 10,0 m and 17,0 m extension
*5395 lengths may be used for single line
10 lifting service only.
(78)
5395 *2745
12
(75,5) (78) 3.For main boom lengths less than 39,0
14
5395 5175 2745 m with the boom extension erected,
(73) (76,5) (75,5) the rated loads are determined by boom
5395 4620 *4400 2745 angle. Use only the column which
16
(70,5) (74) (78) (73,5)
corresponds to the boom extension
5065 4155 3640 2745 *2740
18
(68) (71,5) (74) (71,5) (78)
length and offset for which the machine
4490 3760 3345 2745 2665
is set up. For boom angles not shown,
20 use rating of the next lower boom
(65,5) (69) (71,5) (69,5) (75)
4020 3420 3085 2745 2520 *2235 angle.
22
(63) (66,5) (69) (67) (72,5) (78)

24
3620 3130 2855 2740 2295 2010 4. WARNING: Operation of this
(60,5) (64) (66) (65) (70,5) (74,5) machine with heavier loads than the
3275 2875 2650 2515 2100 1860 capacities listed is strictly prohibited.
26
(57,5) (61) (63,5) (63) (68) (72)
Machine tipping with boom extension
2,980 2655 2475 2270 1930 1725
28
(55) (58) (60,5) (60,5) (65,5) (69,5)
occurs rapidly and without advance
warning.
2720 2455 2310 2060 1775 1605
30
(51,5) (55) (57) (58) (63) (67)
2275 2280 2160 1870 1635 1495 5.Boom angle is the angle above or
32
(48,5) (52) (54) (55,5) (60,5) (64,5) below horizontal of the longitudinal
1890 2085 2030 1710 1510 1395 axis of the boom base section after
34
(45) (48,5) (50,5) (53) (58) (61,5) lifting rated load.
1550 1715 1845 1560 1400 1305
36
(41,5) (45) (46,5) (50,5) (55,5) (58,5) 6.Capacities listed are with outriggers
1245 1385 1430 1290 1220 properly extended and vertical jacks set
38
(37,5) (41) (47,5) (52,5) (55,5)
only.
975 1090 1225 1200 1135
40
(33,5) (36,5) (45) (49,5) (52,5)
730 830 995 1115 1065
7.When lifting over the main boom nose
42 with 10,0 m or 17,0 m extension erected,
(28,5) (31,5) (41,5) (46,5) (49)
510 785 980 the outriggers must be fully extended or
44
(22) (38) (43) 50% extended (4,7 m spread).
595 755
46
(34,5) (39)
555
48
(34,5)
Minimum boom angle
(°) for indicated length 20 28 43,5 30 31,5 46
(no load)
Maximum boom length
(m) at 0° boom angle 33,5 30,5
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10383 3
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 41
Load charts - Metric 85%

NOTES:
1.All capacities above the bold line are
12,6 m - 39,0 m 10,0 m - 17,0 m 6,1 m - 12,2 m 8165 kg 100% 360° based on structural strength of boom
7,3 m extension and do not exceed 85% of
23,1 m (17,0 m LENGTH + 1 INSERT) 29,2 m (17,0 m LENGTH + 2 INSERTS) tipping loads, in accordance with SAE
Radius J-765.
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0084 #0085 #0086 #0084 #0085 #0086 2.The 17,0 m extension lengths may be
2200 used for single line lifting service only.
16
(77)
2200 1595 3.For main boom lengths less than
18
(75) (77) 39,0 m with the boom extension
2200 *2400 1595 erected, the rated loads are
20
(73) (78) (75,5) determined by boom angle. Use only
22
2200 2125 1595 *1695 the column which corresponds to the
(71) (76) (73,5) (78) boom extension length and offset
24
2155 1905 *1835 1595 1585 for which the machine is set up. For
(69) (74) (78) (71,5) (76) boom angles not shown, use rating of
1945 1710 1580 1485 1395 *1470 the next lower boom angle.
26
(67) (71,5) (75,5) (70) (74) (78)
1730 1540 1440 1295 1235 1195 4. WARNING: Operation of this
28
(65) (69,5) (73) (68) (72,5) (75,5)
machine with heavier loads than the
1540 1395 1310 1120 1085 1060 capacities listed is strictly prohibited.
30
(62,5) (67,5) (71) (66) (70,5) (73,5)
Machine tipping with boom extension
1375 1255 1190 970 950 935
32 occurs rapidly and without advance
(60,5) (65) (68,5) (64) (68,5) (71,5)
warning.
1230 1135 1085 840 835 830
34
(58,5) (63) (66) (62) (66,5) (69,5)
5.Boom angle is the angle above or
1100 1025 985 720 725 730
36
(56) (60,5) (63,5) (60) (64,5) (67,5) below horizontal of the longitudinal
985 925 895 615 630 635
axis of the boom base section after
38 lifting rated load.
(54) (58,5) (61) (58) (62,5) (65)
880 835 815 520 540 550
40 6.Capacities listed are with outriggers
(51,5) (56) (58,5) (56) (60) (63)
785 745 735 properly extended and vertical jacks
42 set only.
(49) (53,5) (56)
700 670 665
44
(46) (50,5) (53) 7.When lifting over the main boom
620 595 595 nose with 17,0 m extension erected
46
(43) (47,5) (50) and inserts, the outriggers must be
530 535 fully extended or 50% extended and
48
(44,5) (46,5) vertical jacks set.
Minimum boom angle
(°) for indicated length 39 40,5 43,5 53,5 58 60,5
(no load)
Maximum boom
length (m) at 0° boom 21,4 21,4
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10384 7
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

42 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

12,6 m - 39,0 m 6350 kg 100% 360°


7,3 m

#0101
Radius
in Main boom length in meters
meters
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6 39,0
+68 025
2,5
(73)
66 425 39 000 39 000
3
(70,5) (74) (77)
60 625 39 000 39 000 18 575
3,5
(68) (72) (75,5) (77,5)
55 500 39 000 39 000 18 575 *17 675
4
(65) (70) (73,5) (76) (78)
50 775 39 000 39 000 18 575 17 675
4,5
(62,5) (68) (72) (75) (77)
46 875 38 850 38 825 18 575 17 675 *17 575
5
(60) (66) (70,5) (73,5) (75,5) (78)
39 250 38 525 38 450 18 575 17 675 17 575 *17 550
6
(54,5) (61,5) (67) (70,5) (73) (75,5) (78)
31 575 31 475 31 225 18 575 17 675 17 575 17 550 *14 475 *11 675
7
(48) (57) (63,5) (67,5) (70,5) (73) (75) (78) (78)
24 450 24 525 24 350 18 575 17 675 17 575 17 250 14 475 11 675 *6620
8
(41) (52,5) (60) (64,5) (68) (71) (73) (74,5) (76) (78)
19 600 19 700 19 650 18 575 17 675 17 575 16 500 14 475 11 675 6620
9
(32,5) (47) (56) (61,5) (65,5) (68,5) (71) (73) (74,5) (75,5)
13 525 16 175 16 225 16 150 16 600 16 400 15 150 13 800 11 675 6620
10
(20) (41,5) (52) (58,5) (63) (66,5) (69) (71) (73) (74)
11 450 11 525 11 575 11 975 12 400 12 650 11 800 10 925 6620
12
(26) (43) (52) (57,5) (61,5) (65) (67,5) (69,5) (71)
8500 8570 9005 9390 9765 9915 9530 6620
14
(31.5) (44,5) (51,5) (57) (61) (64) (66,5) (68)
See 5145 6465 6870 7275 7620 7785 7950 6620
16
Note 16 (10) (35,5) (45) (51 ,5) (56,5) (60) (63) (65)
4910 5300 5680 6050 6225 6400 6620
18
(23) (37,5) (46) (51,5) (56) (59,5) (62)
4090 4460 4850 5035 5215 5395
20
(28) (39,5) (46,5) (51,5) (56) (58,5)
2700 3490 3885 4080 4270 4430
22
(11) (31,5) (40,5) (47) (52) (55)
2700 3105 3300 3490 3650
24
(20,5) (34) (42) (47,5) (51)
2460 2655 2840 3015
26
(25,5) (36) (43) (47)
1680 2110 2295 2470
28
(11) (29) (38) (43)
1650 1830 2000
30
(19,5) (31,5) (38)
1430 1600
32
(24) (32.5)
950 1250
34
(11,5) (25,5)
940
36
(15)
Minimum boom angle (deg.) for indicated length (no load) 9
Maximum boom length (m) at 0 deg. boom angle (no load) 36,6
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
+9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle

Boom Main boom length in meters


angle
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6
9430 6875 4770 3035 2310 1765 1315 905 590

(10,4) (13) (16,1) (19,2) (22,2) (25,2) (28,3) (31,3) (34,4)
Note: ( ) Reference radii in meters. A6-829-10381 4
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 43
Load charts - Metric 85%

NOTES:
12,6 m - 39,0 m 10,0 m - 17,0 m 6350 kg
1.All capacities above the bold line are
100% 360°
7,3 m based on structural strength of boom
1 0,0 m L E NGTH 1 7 ,0 m L E NG TH extension and do not exceed 85% of
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET J-765.
meters
#0121 #0122 #0123 #0141 #0142 #0143
2.The 10,0 m and 17,0 m extension
*5395
10
(78)
lengths may be used for single line
lifting service only.
5395 *2745
12
(75,5) (78)
5395 5175 2,745 3.For main boom lengths less than 39,0
14 m with the boom extension erected,
(73) (76,5) (75,5)
5395 4620 *4400 2745 the rated loads are determined by boom
16
(70,5) (74) (78) (73,5) angle. Use only the column which
5065 4155 3640 2745 *2740 corresponds to the boom extension
18
(68) (71,5) (74) (71,5) (78) length and offset for which the machine
20
4490 3760 3345 2745 2665 is set up. For boom angles not shown,
(65,5) (69) (71,5) (69,5) (75) use rating of the next lower boom
4020 3420 3085 2745 2520 *2235 angle.
22
(63) (66,5) (69) (67) (72,5) (78)
3620 3130 2855 2740 2295 2010 4. WARNING: Operation of this
24
(60,5) (64) (66) (65) (70,5) (74.5)
machine with heavier loads than the
3275 2875 2650 2515 2100 1860
26
(57,5) (61) (63,5) (63) (68) (72)
capacities listed is strictly prohibited.
2,830 2655 2475 2270 1930 1725
Machine tipping with boom extension
28 occurs rapidly and without advance
(55) (58) (60,5) (60,5) (65,5) (69,5)
2345 2455 2310 2060 1775 1605 warning.
30
(51,5) (55) (57) (58) (63) (67)
1930 2,155 2160 1870 1635 1495 5.Boom angle is the angle above or
32
(48,5) (52) (54) (55,5) (60,5) (64,5) below horizontal of the longitudinal
1565 1755 1910 1710 1510 1395 axis of the boom base section after
34
(45) (48,5) (50,5) (53) (58) (61,5) lifting rated load.
1245 1410 1540 1470 1400 1305
36
(41,5) (45) (46,5) (50,5) (55,5) (58,5) 6.Capacities listed are with outriggers
955 1100 1195 1290 1220 properly extended and vertical jacks set
38
(37,5) (41) (47,5) (52,5) (55,5)
only.
700 820 955 1200 1135
40
(33,5) (36,5) (45) (49,5) (52,5)
7.When lifting over the main boom nose
570 735 965 1065
42
(31,5) (41,5) (46,5) (49) with 10,0 m or 17,0 m extension erected,
540 735
the outriggers must be fully extended or
44 50% extended (4,7 m spread).
(38) (43)
520
46
(39)
Minimum boom angle
(°) for indicated length 26,5 28,5 43,5 35 36 46
(no load)
Maximum boom length
(m) at 0° boom angle 33,5 27,4
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10383 4
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

44 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

NOTES:
12,6 m - 39,0 m 10,0 m - 17,0 m 6,1 m - 12,2 m 6350 kg 100% 360° 1.All capacities above the bold line are
7,3 m based on structural strength of boom
23,1 m (17,0 m LENGTH + 1 INSERT) 29,2 m (17,0 m LENGTH + 2 INSERTS) extension and do not exceed 85% of
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET J-765.
meters
#0184 #0185 #0186 #0184 #0185 #0186
2200 2.The 17,0 m extension lengths may be
16
(77) used for single line lifting service only.
2200 1595
18
(75) (77) 3.For main boom lengths less than
20
2200 *2400 1595 39,0 m with the boom extension
(73) (78) (75,5) erected, the rated loads are
2200 2125 1595 *1695 determined by boom angle. Use only
22
(71) (76) (73,5) (78) the column which corresponds to the
2155 1905 *1835 1595 1585 boom extension length and offset
24
(69) (74) (78) (71,5) (76)
for which the machine is set up. For
1945 1710 1580 1485 1395 *1470
26 boom angles not shown, use rating of
(67) (71,5) (75,5) (70) (74) (78)
the next lower boom angle.
1730 1540 1440 1295 1235 1195
28
(65) (69,5) (73) (68) (72,5) (75,5)
1540 1395 1310 1120 1085 1060
4. WARNING: Operation of this
30 machine with heavier loads than the
(62,5) (67,5) (71) (66) (70,5) (73,5)
1375 1255 1190 970 950 935 capacities listed is strictly prohibited.
32
(60,5) (65) (68,5) (64) (68,5) (71,5) Machine tipping with boom extension
1230 1135 1085 840 835 830 occurs rapidly and without advance
34
(58,5) (63) (66) (62) (66,5) (69,5) warning.
1100 1025 985 720 725 730
36
(56) (60,5) (63,5) (60) (64,5) (67,5) 5.Boom angle is the angle above or
38
985 925 895 615 630 635 below horizontal of the longitudinal
(54) (58,5) (61) (58) (62,5) (65) axis of the boom base section after
880 835 815 520 540 550 lifting rated load.
40
(51,5) (56) (58,5) (56) (60) (63)
785 745 735
42 6.Capacities listed are with outriggers
(49) (53,5) (56)
properly extended and vertical jacks
590 670 665
44
(46) (50,5) (53)
set only.
595 595
46 7.When lifting over the main boom
(47,5) (50)
535 nose with 17,0 m extension erected
48 and inserts, the outriggers must be
(46,5)
Minimum boom angle fully extended or 50% extended and
(°) for indicated length 43,5 44,5 44 53,5 58 60,5 vertical jacks set.
(no load)
Maximum boom
length (m) at 0° boom 21,4 18,3
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10384 8
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 45
Load charts - Metric 85%

12,6 m - 39,0 m 5445 kg 100% 360°


7,3 m

#0201
Radius
in Main boom length in meters
meters
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6 39,0
+68 025
2,5
(73)
66 200 39 000 39 000
3
(70,5) (74) (77)
60 375 39 000 39 000 18 575
3,5
(68) (72) (75,5) (77,5)
55 275 39 000 39 000 18 575 *17 675
4
(65) (70) (73,5) (76) (78)
50 575 39 000 39 000 18 575 17 675
4,5
(62,5) (68) (72) (75) (77)
46 425 38 700 38 675 18 575 17 675 *17 575
5
(60) (66) (70,5) (73,5) (75,5) (78)
38 675 38 000 37 925 18 575 17 675 17 575 *17 550
6
(54,5) (61,5) (67) (70,5) (73) (75,5) (78)
30 400 30 300 30 050 18 575 17 675 17 575 17 550 *14 475 *11 675
7
(48) (57) (63,5) (67,5) (70,5) (73) (75) (78) (78)
23 500 23 550 23 375 18 575 17 675 17 575 17 250 14 475 11 675 *6620
8
(41) (52,5) (60) (64,5) (68) (71) (73) (74,5) (76) (78)
18 800 18 875 18 825 18 575 17 675 17 575 16 500 14 475 11 675 6620
9
(32,5) (47) (56) (61,5) (65,5) (68,5) (71) (73) (74,5) (75,5)
13 225 15 500 15 550 15 450 15 900 16 350 15 150 13 800 11 675 6620
10
(20) (41,5) (52) (58,5) (63) (66,5) (69) (71) (73) (74)
10 900 10 975 11 025 11 450 11 850 12 350 11 800 10 925 6620
12
(26) (43) (52) (57,5) (61,5) (65) (67,5) (69,5) (71)
8050 8120 8555 8940 9315 9465 9530 6620
14
(31,5) (44,5) (51,5) (57) (61) (64) (66,5) (68)
See 5095 6080 6490 6890 7235 7405 7570 6620
16
Note 16 (10) (35,5) (45) (51 ,5) (56,5) (60) (63) (65)
4575 4965 5350 5720 5895 6070 6295
18
(23) (37,5) (46) (51,5) (56) (59,5) (62)
3795 4165 4560 4745 4920 5100
20
(28) (39,5) (46,5) (51,5) (56) (58,5)
2630 3225 3620 3820 4010 4165
22
(11) (31,5) (40,5) (47) (52) (55)
2460 2865 3060 3250 3415
24
(20,5) (34) (42) (47,5) (51)
2245 2435 2620 2795
26
(25,5) (36) (43) (47)
1600 1910 2095 2270
28
(11) (29) (38) (43)
1465 1645 1815
30
(19,5) (31,5) (38)
1255 1425
32
(24) (32,5)
865 1085
34
(11.5) (25,5)
790
36
(15)
Minimum boom angle (deg.) for indicated length (no load) 9
Maximum boom length (m) at 0 deg. boom angle (no load) 36,6
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
+9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle

Boom Main boom length in meters


angle
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6
9430 6875 4770 3035 2310 1765 1315 905 590

(10,4) (13) (16,1) (19,2) (22,2) (25,2) (28,3) (31,3) (34,4)
Note: ( ) Reference radii in meters. A6-829-10381 5
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

46 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

NOTES:
1.All capacities above the bold line are
12,6 m - 39,0 m 10,0 m - 17,0 m 5445 kg 100% 360°
7,3 m based on structural strength of boom
extension and do not exceed 85% of
10,0 m LENGTH 17,0 m LENGTH tipping loads, in accordance with SAE
Radius J-765.
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0221 #0222 #0223 #0241 #0242 #0243 2.The 10,0 m and 17,0 m extension
lengths may be used for single line
*5395
10
(78) lifting service only.
5395 *2745
12 3.For main boom lengths less than 39,0
(75,5) (78)
5395 5175 2745
m with the boom extension erected,
14 the rated loads are determined by boom
(73) (76,5) (75,5)
5395 4620 *4400 2745
angle. Use only the column which
16 corresponds to the boom extension
(70,5) (74) (78) (73,5)
5065 4155 3640 2745 *2740
length and offset for which the machine
18 is set up. For boom angles not shown,
(68) (71,5) (74) (71,5) (78)
4490 3760 3345 2745 2665 use rating of the next lower boom
20 angle.
(65,5) (69) (71,5) (69,5) (75)
4020 3420 3085 2745 2520 *2235
22 4. WARNING: Operation of this
(63) (66,5) (69) (67) (72,5) (78)
3620 3130 2855 2740 2295 2010 machine with heavier loads than the
24 capacities listed is strictly prohibited.
(60,5) (64) (66) (65) (70,5) (74,5)
3180 2875 2650 2515 2100 1860 Machine tipping with boom extension
26 occurs rapidly and without advance
(57,5) (61) (63,5) (63) (68) (72)
2,630 2655 2475 2270 1930 1725 warning.
28
(55) (58) (60,5) (60,5) (65,5) (69,5)
2160 2425 2310 2060 1775 1605 5.Boom angle is the angle above or
30 below horizontal of the longitudinal
(51.5) (55) (57) (58) (63) (67)
1755 1980 2155 1870 1635 1495 axis of the boom base section after
32
(48,5) (52) (54) (55,5) (60,5) (64,5) lifting rated load.
1400 1595 1745 1610 1510 1395
34
(45) (48,5) (50,5) (53) (58) (61,5) 6.Capacities listed are with outriggers
1090 1255 1385 1315 1400 1305 properly extended and vertical jacks set
36
(41,5) (45) (46,5) (50,5) (55.5) (58,5) only.
815 955 1050 1290 1220
38
(37,5) (41) (47,5) (52,5) (55,5) 7.When lifting over the main boom nose
565 685 820 1090 1135 with 10,0 m or 17,0 m extension erected,
40
(33,5) (36,5) (45) (49,5) (52,5) the outriggers must be fully extended or
605 835 970 50% extended (4,7 m spread).
42
(41,5) (46.5) (49)
610
44
(43)
Minimum boom angle
(°) for indicated length 30,5 32,5 43,5 38 39,5 46
(no load)
Maximum boom length
(m) at 0° boom angle 30,5 27,4
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10383 5
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 47
Load charts - Metric 85%

NOTES:
12,6 m - 39,0 m 10,0 m - 17,0 m 6,1 m - 12,2 m 5445 kg 100% 360° 1.All capacities above the bold line are
7,3 m based on structural strength of boom
23,1 m (17,0 m LENGTH + 1 INSERT) 29,2 m (17,0 m LENGTH + 2 INSERTS) extension and do not exceed 85% of
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET J-765.
meters
#0284 #0285 #0286 #0284 #0285 #0286
2200 2.The 17,0 m extension lengths may be
16 used for single line lifting service only.
(77)
2200 1595
18
(75) (77) 3.For main boom lengths less than
2200 *2400 1595 39,0 m with the boom extension
20
(73) (78) (75,5) erected, the rated loads are
2200 2125 1595 *1695 determined by boom angle. Use only
22
(71) (76) (73,5) (78) the column which corresponds to the
24
2155 1905 *1835 1595 1585 boom extension length and offset
(69) (74) (78) (71,5) (76) for which the machine is set up. For
1945 1710 1580 1485 1395 *1470 boom angles not shown, use rating of
26
(67) (71,5) (75,5) (70) (74) (78) the next lower boom angle.
1730 1540 1440 1295 1235 1195
28
(65) (69,5) (73) (68) (72,5) (75,5)
4. WARNING: Operation of this
1540 1395 1310 1120 1085 1060 machine with heavier loads than the
30
(62,5) (67,5) (71) (66) (70,5) (73,5)
capacities listed is strictly prohibited.
1375 1255 1190 970 950 935 Machine tipping with boom extension
32
(60,5) (65) (68,5) (64) (68,5) (71,5)
occurs rapidly and without advance
1230 1135 1085 840 835 830
34 warning.
(58,5) (63) (66) (62) (66,5) (69,5)
1100 1025 985 720 725 730
36
(56) (60,5) (63,5) (60) (64,5) (67,5)
5.Boom angle is the angle above or
below horizontal of the longitudinal
985 925 895 615 630 635
38 axis of the boom base section after
(54) (58,5) (61) (58) (62,5) (65)
880 835 815 520 540 550
lifting rated load.
40
(51,5) (56) (58,5) (56) (60) (63)
665 745 735 6.Capacities listed are with outriggers
42 properly extended and vertical jacks
(49) (53,5) (56)
670 665 set only.
44
(50,5) (53)
500 595 7.When lifting over the main boom
46
(47,5) (50) nose with 17,0 m extension erected
Minimum boom angle and inserts, the outriggers must be
(°) for indicated length 46 46 46,5 53,5 58 60,5 fully extended or 50% extended and
(no load) vertical jacks set.
Maximum boom
length (m) at 0° boom 21,4 18,3
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10384 9
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

48 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

12,6 m - 39,0 m 4535 kg 100% 360°


7,3 m

#0301
Radius
in Main boom length in meters
meters
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6 39,0
+68 025
2,5
(73)
65 950 39 000 39 000
3
(70,5) (74) (77)
60 125 39 000 39 000 18 575
3,5
(68) (72) (75,5) (77,5)
55 025 39 000 39 000 18 575 *17 675
4
(65) (70) (73,5) (76) (78)
50 350 39 000 39 000 18 575 17 675
4,5
(62,5) (68) (72) (75) (77)
45 725 38 550 38 525 18 575 17 675 *17 575
5
(60) (66) (70,5) (73,5) (75,5) (78)
38 100 37 475 37 375 18 575 17 675 17 575 *17 550
6
(54,5) (61,5) (67) (70,5) (73) (75,5) (78)
29 200 29 100 28 850 18 575 17 675 17 575 17 550 *14 475 *11 675
7
(48) (57) (63,5) (67,5) (70,5) (73) (75) (78) (78)
22 525 22 600 22 425 18 575 17 675 17 575 17 250 14 475 11 675 *6620
8
(41) (52,5) (60) (64,5) (68) (71) (73) (74,5) (76) (78)
17 975 18 075 18 025 17 900 17 675 17 575 16 500 14 475 11 675 6620
9
(32,5) (47) (56) (61,5) (65,5) (68,5) (71) (73) (74,5) (75,5)
12 925 14 800 14 850 14 750 15 200 15 650 15 150 13 800 11 675 6620
10
(20) (41,5) (52) (58,5) (63) (66,5) (69) (71) (73) (74)
10 350 10 425 10 475 10 875 11 300 11 800 11 800 10 925 6620
12
(26) (43) (52) (57,5) (61,5) (65) (67,5) (69,5) (71)
7600 7665 8100 8490 8865 9010 9155 6620
14
(31,5) (44,5) (51,5) (57) (61) (64) (66,5) (68)
See 5045 5695 6105 6505 6850 7020 7185 6620
16
Note 16 (10) (35,5) (45) (51, 5) (56,5) (60) (63) (65)
4240 4630 5015 5385 5560 5735 5960
18
(23) (37,5) (46) (51,5) (56) (59,5) (62)
3500 3870 4265 4445 4625 4805
20
(28) (39,5) (46,5) (51,5) (56) (58,5)
2560 2960 3360 3555 3745 3900
22
(11) (31,5) (40,5) (47) (52) (55)
2220 2630 2820 3010 3175
24
(20,5) (34) (42) (47,5) (51)
2025 2220 2405 2575
26
(25,5) (36) (43) (47)
1520 1710 1895 2070
28
(11) (29) (38) (43)
1280 1460 1630
30
(19,5) (31,5) (38)
1085 1255
32
(24) (32,5)
755 925
34
(11,5) (25,5)
640
36
(15)
Minimum boom angle (deg.) for indicated length (no load) 9
Maximum boom length (m) at 0 deg. boom angle (no load) 36,6
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
+9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle

Boom Main boom length in meters


angle
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6
9430 6875 4770 3035 2310 1765 1315 905 590

(10,4) (13) (16,1) (19,2) (22,2) (25,2) (28,3) (31,3) (34,4)
Note: ( ) Reference radii in meters. A6-829-10381 6
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 49
Load charts - Metric 85%

NOTES:
12,6 m - 39,0 m 10,0 m - 17,0 m 4535 kg 100% 360°
1.All capacities above the bold line are
7,3 m based on structural strength of boom
extension and do not exceed 85% of
10,0 m LENGTH 17,0 m LENGTH
tipping loads, in accordance with SAE
Radius
0° 20° 40° 0° 20° 40° J-765.
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0321 #0322 #0323 #0341 #0342 #0343 2.The 10,0 m and 17,0 m extension
*5395 lengths may be used for single line
10
(78) lifting service only.
5395 *2745
12
(75,5) (78) 3.For main boom lengths less than 39,0
5395 5175 2745 m with the boom extension erected,
14
(73) (76,5) (75,5) the rated loads are determined by boom
16
5395 4620 *4400 2745 angle. Use only the column which
(70,5) (74) (78) (73,5) corresponds to the boom extension
18
5065 4155 3640 2745 *2740 length and offset for which the machine
(68) (71,5) (74) (71,5) (78) is set up. For boom angles not shown,
20
4490 3760 3345 2745 2665 use rating of the next lower boom
(65,5) (69) (71,5) (69,5) (75) angle.
4020 3420 3085 2745 2520 *2235
22
(63) (66,5) (69) (67) (72,5) (78) 4. WARNING: Operation of this
3595 3130 2855 2740 2295 2010 machine with heavier loads than the
24
(60,5) (64) (66) (65) (70,5) (74,5) capacities listed is strictly prohibited.
2960 2875 2650 2515 2100 1860 Machine tipping with boom extension
26
(57,5) (61) (63,5) (63) (68) (72)
occurs rapidly and without advance
2,430 2655 2475 2270 1930 1725 warning.
28
(55) (58) (60,5) (60,5) (65,5) (69,5)
1975 2235 2310 2060 1775 1605 5.Boom angle is the angle above or
30
(51,5) (55) (57) (58) (63) (67)
below horizontal of the longitudinal
1580 1805 1980 1775 1635 1495 axis of the boom base section after
32
(48,5) (52) (54) (55,5) (60,5) (64,5)
lifting rated load.
1240 1430 1580 1450 1510 1395
34
(45) (48,5) (50,5) (53) (58) (61,5)
6.Capacities listed are with outriggers
940 1100 1230 1160 1400 1305
36 properly extended and vertical jacks set
(41,5) (45) (46,5) (50,5) (55,5) (58,5)
only.
670 810 910 1225 1220
38
(37,5) (41) (47,5) (52,5) (55,5)
7.When lifting over the main boom nose
545 680 950 1125
40
(36,5) (45) (49,5) (52,5)
with 10,0 m or 17,0 m extension erected,
the outriggers must be fully extended or
705 840
42
(46,5) (49) 50% extended (4,7 m spread).
Minimum boom angle
(°) for indicated length 33 34 43,5 40,5 41,5 46
(no load)
Maximum boom length
(m) at 0° boom angle 30,5 24,4
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10383 6
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

50 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

NOTES:
12,6 m - 39,0 m 10,0 m - 17,0 m 6,1 m - 12,2 m 4535 kg 100% 360°
1.All capacities above the bold line are
7,3 m based on structural strength of boom
23,1 m (17,0 m LENGTH + 1 INSERT) 29,2 m (17,0 m LENGTH + 2 INSERTS)
extension and do not exceed 85% of
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET J-765.
Meters
#0384 #0385 #0386 #0384 #0385 #0386
2.The 17,0 m extension lengths may be
2200 used for single line lifting service only.
16
(77)
2200 1595
18 3.For main boom lengths less than
(75) (77)
39,0 m with the boom extension
2200 *2400 1595
20
(73) (78) (75,5)
erected, the rated loads are
determined by boom angle. Use only
2200 2125 1595 *1695
22
(71) (76) (73,5) (78) the column which corresponds to the
boom extension length and offset
2155 1905 *1835 1595 1585
24 for which the machine is set up. For
(69) (74) (78) (71.5) (76)
1945 1710 1580 1485 1395 *1470
boom angles not shown, use rating of
26 the next lower boom angle.
(67) (71.5) (75,5) (70) (74) (78)
1730 1540 1440 1295 1235 1195
28 4. WARNING: Operation of this
(65) (69,5) (73) (68) (72,5) (75,5)
1540 1395 1310 1120 1085 1060 machine with heavier loads than the
30 capacities listed is strictly prohibited.
(62,5) (67,5) (71) (66) (70,5) (73,5)
1375 1255 1190 970 950 935 Machine tipping with boom extension
32 occurs rapidly and without advance
(60,5) (65) (68,5) (64) (68,5) (71,5)
1230 1135 1085 840 835 830 warning.
34
(58,5) (63) (66) (62) (66,5) (69,5)
1100 1025 985 720 725 730 5.Boom angle is the angle above or
36
(56) (60,5) (63,5) (60) (64,5) (67,5) below horizontal of the longitudinal
985 925 895 615 630 635 axis of the boom base section after
38
(54) (58,5) (61) (58) (62,5) (65) lifting rated load.
750 835 815 520 540 550
40
(51.5) (56) (58,5) (56) (60) (63) 6.Capacities listed are with outriggers
42
535 745 735 properly extended and vertical jacks
(49) (53,5) (56) set only.
585 665
44
(50,5) (53) 7.When lifting over the main boom
515 nose with 17,0 m extension erected
46
(50) and inserts, the outriggers must be
Minimum boom angle fully extended or 50% extended and
(°) for indicated length 46,5 48 48 54 58 60,5 vertical jacks set.
(no load)
Maximum boom
length (m) at 0° boom 21,4 18,3
angle (no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10385 0
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 51
Load charts - Metric 85%

12,6 m - 39,0 m 3630 kg 100% 360°


7,3 m

Radius #0401
in
Main boom length in meters
meters
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6 39,0
+68 025
2,5
(73)
65 725 39 000 39 000
3
(70,5) (74) (77)
59 875 39 000 39 000 18 575
3,5
(68) (72) (75,5) (77,5)
54 800 39 000 39 000 18 575 *17 675
4
(65) (70) (73,5) (76) (78)
50 150 39 000 39 000 18 575 17 675
4,5
(62,5) (68) (72) (75) (77)
45 225 38 375 38 350 18 575 17 675 *17 575
5
(60) (66) (70,5) (73,5) (75,5) (78)
37 700 36 950 36 850 18 575 17 675 17 575 *17 550
6
(54,5) (61,5) (67) (70,5) (73) (75,5) (78)
28 025 27 925 27 675 18 575 17 675 17 575 17 550 *14 475 *11 675
7
(48) (57) (63,5) (67,5) (70,5) (73) (75) (78) (78)
21 575 21 625 21 450 18 575 17 675 17 575 17 250 14 475 11 675 *6620
8
(41) (52,5) (60) (64,5) (68) (71) (73) (74,5) (76) (78)
17 175 17 250 17 200 17 075 17 575 17 575 16 500 14 475 11 675 6620
9
(32,5) (47) (56) (61,5) (65,5) (68,5) (71) (73) (74,5) (75,5)
12 625 14 100 14 150 14 050 14 500 14 950 15 150 13 800 11 675 6620
10
(20) (41,5) (52) (58,5) (63) (66,5) (69) (71) (73) (74)
9810 9895 9940 10 350 10 750 11 250 11 350 10 925 6620
12
(26) (43) (52) (57,5) (61,5) (65) (67,5) (69,5) (71)
7150 7215 7650 8040 8415 8560 8705 6620
14
(31,5) (44,5) (51,5) (57) (61) (64) (66,5) (68)
See 5000 5315 5725 6125 6470 6635 6805 6620
16
Note 16 (10) (35,5) (45) (51, 5) (56,5) (60) (63) (65)
3910 4300 4685 5055 5230 5405 5630
18
(23) (37,5) (46) (51,5) (56) (59,5) (62)
3205 3575 3970 4155 4330 4510
20
(28) (39,5) (46,5) (51,5) (56) (58,5)
2340 2695 3095 3290 3480 3635
22
(11) (31,5) (40,5) (47) (52) (55)
1985 2390 2585 2770 2935
24
(20,5) (34) (42) (47,5) (51)
1810 2000 2185 2360
26
(25,5) (36) (43) (47)
1320 1510 1690 1870
28
(11) (29) (38) (43)
1095 1270 1445
30
(19,5) (31,5) (38)
910 1080
32
(24) (32,5)
595 765
34
(11,5) (25,5)
Minimum boom angle (deg.) for indicated length (no load) 9
Maximum boom length (m) at 0 deg. boom angle (no load) 36,6
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
+9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle

Boom Main boom length in meters


angle
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6
9430 6875 4770 3035 2265 1605 1260 850 540

(10,4) (13) (16,1) (19,2) (22,2) (25,2) (28,3) (31,3) (34,4)
Note: ( ) Reference radii in meters. A6-829-10381 7
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

52 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

NOTES:
1.All capacities above the bold line are
12,6 m - 39,0 m 10,0 m - 17,0 m 3630 kg 100% 360°
7,3 m
based on structural strength of boom
extension and do not exceed 85% of
10,0 m LENGTH 17,0 m LENGTH tipping loads, in accordance with SAE
Radius
0° 20° 40° 0° 20° 40° J-765.
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0421 #0422 #0423 #0441 #0442 #0443 2.The 10,0 m and 17,0 m extension
*5395 lengths may be used for single line
10 lifting service only.
(78)
5395 *2745
12
(75,5) (78) 3.For main boom lengths less than 39,0
5395 5175 2745 m with the boom extension erected,
14
(73) (76,5) (75,5) the rated loads are determined by boom
5395 4620 *4400 2,745 angle. Use only the column which
16
(70,5) (74) (78) (73,5) corresponds to the boom extension
5065 4155 3640 2745 *2740 length and offset for which the machine
18
(68) (71,5) (74) (71,5) (78) is set up. For boom angles not shown,
4490 3760 3345 2745 2665 use rating of the next lower boom
20
(65,5) (69) (71,5) (69,5) (75) angle.
4020 3420 3085 2745 2520 *2235
22
(63) (66,5) (69) (67) (72,5) (78) 4. WARNING: Operation of this
24
3355 3130 2855 2740 2295 2010 machine with heavier loads than the
(60,5) (64) (66) (65) (70,5) (74,5) capacities listed is strictly prohibited.
26
2740 2875 2650 2515 2100 1860 Machine tipping with boom extension
(57,5) (61) (63,5) (63) (68) (72) occurs rapidly and without advance
28
2225 2535 2475 2270 1930 1725 warning.
(55) (58) (60,5) (60,5) (65,5) (69,5)
1790 2050 2250 1960 1775 1605 5.Boom angle is the angle above or
30
(51,5) (55) (57) (58) (63) (67) below horizontal of the longitudinal
1410 1635 1805 1600 1635 1495 axis of the boom base section after
32
(48,5) (52) (54) (55,5) (60,5) (64,5) lifting rated load.
1075 1270 1420 1285 1,510 1395
34
(45) (48,5) (50,5) (53) (58) (61,5)
6.Capacities listed are with outriggers
785 950 1080 1010 1375 1305 properly extended and vertical jacks set
36
(41,5) (45) (46,5) (50,5) (55,5) (58,5)
only.
525 665 765 1080 1220
38
(37,5) (41) (47,5) (52,5) (55,5)
7.When lifting over the main boom nose
545 815 990 with 10,0 m or 17,0 m extension erected,
40
(45) (49,5) (52,5)
the outriggers must be fully extended or
580 710
42 50% extended (4,7 m spread).
(46,5) (49)
Minimum boom angle
(°) for indicated length 36,5 36,5 43,5 43 44 46
(no load)
Maximum boom length
(m) at 0° boom angle 27,4 24,4
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10383 7
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 53
Load charts - Metric 85%

NOTES:
12,6 m - 39,0 m 10,0 m - 17,0 m 6,1 m - 12,2 m 3630 kg 100% 360° 1.All capacities above the bold line are
7,3 m based on structural strength of boom
extension and do not exceed 85% of
23,1 m (17,0 m LENGTH + 1 INSERT) 29,2 m (17,0 m LENGTH + 2 INSERTS)
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
J-765.
meters
#0484 #0485 #0486 #0484 #0485 #0486
2.The 17,0 m extension lengths may be
2200
16 used for single line lifting service only.
(77)
2200 1595
18
(75) (77) 3.For main boom lengths less than
2200 *2400 1595
39,0 m with the boom extension
20 erected, the rated loads are
(73) (78) (75.5)
2200 2125 1595 *1695 determined by boom angle. Use only
22 the column which corresponds to the
(71) (76) (73.5) (78)
2155 1905 *1835 1595 1585 boom extension length and offset
24
(69) (74) (78) (71.5) (76) for which the machine is set up. For
1945 1710 1580 1485 1395 *1470 boom angles not shown, use rating of
26
(67) (71.5) (75.5) (70) (74) (78) the next lower boom angle.
1730 1540 1440 1295 1235 1195
28
(65) (69.5) (73) (68) (72.5) (75.5) 4. WARNING: Operation of this
1540 1395 1310 1120 1085 1060 machine with heavier loads than the
30
(62.5) (67.5) (71) (66) (70.5) (73.5) capacities listed is strictly prohibited.
1375 1255 1190 970 950 935 Machine tipping with boom extension
32
(60.5) (65) (68.5) (64) (68.5) (71.5)
occurs rapidly and without advance
1230 1135 1085 840 835 830
34 warning.
(58.5) (63) (66) (62) (66.5) (69.5)
1095 1025 985 720 725 730
36
(56) (60.5) (63.5) (60) (64.5) (67.5) 5.Boom angle is the angle above or
845 925 895 615 630 635
below horizontal of the longitudinal
38 axis of the boom base section after
(54) (58.5) (61) (58) (62.5) (65)
620 835 815 505 540 550 lifting rated load.
40
(51.5) (56) (58.5) (56) (60) (63)
675 735 6.Capacities listed are with outriggers
42
(53.5) (56) properly extended and vertical jacks
610 set only.
44
(53)
Minimum boom angle 7.When lifting over the main boom
(°) for indicated length 48.5 50.5 50.5 55 58 60.5 nose with 17,0 m extension erected
(no load)
and inserts, the outriggers must be
Maximum boom
fully extended or 50% extended and
length (m) at 0° boom 18.3 18.3
angle (no load)
vertical jacks set.
NOTE: ( ) Boom angles are in degrees. A6-829-10385 1
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

54 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

12,6 m - 39,0 m 1815 kg 100% 360°


7,3 m

#0501
Radius
in
Main boom length in meters
meters
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6 39,0
+68 025
2,5
(73)
65 275 39 000 39 000
3
(70,5) (74) (77)
59 375 39 000 39 000 18 575
3,5
(68) (72) (75,5) (77,5)
54 325 39 000 39 000 18 575 *17 675
4
(65) (70) (73,5) (76) (78)
49 700 39 000 39 000 18 575 17 675
4,5
(62,5) (68) (72) (75) (77)
44 850 38 075 38 050 18 575 17 675 *17 575
5
(60) (66) (70,5) (73,5) (75,5) (78)
35 225 34 450 34 050 18 575 17 675 17 575 *17 550
6
(54,5) (61,5) (67) (70,5) (73) (75,5) (78)
25 650 25 550 25 300 18 575 17 675 17 575 17 550 *14 475 *11 675
7
(48) (57) (63,5) (67,5) (70,5) (73) (75) (78) (78)
19 650 19 700 19 525 18 200 17 675 17 575 17 250 14 475 11 675 *6620
8
(41) (52,5) (60) (64.5) (68) (71) (73) (74,5) (76) (78)
15 550 15 650 15 600 15 475 15 950 16 450 16 500 14 475 11 675 6620
9
(32,5) (47) (56) (61,5) (65,5) (68,5) (71) (73) (74,5) (75,5)
12 050 12 700 12 750 12 650 13 100 13 550 14 400 13 800 11 675 6620
10
(20) (41,5) (52) (58,5) (63) (66,5) (69) (71) (73) (74)
8710 8800 8845 9255 9660 10 150 10 250 10 350 6620
12
(26) (43) (52) (57,5) (61,5) (65) (67,5) (69,5) (71)
6245 6315 6750 7135 7515 7660 7805 6620
14
(31,5) (44,5) (51,5) (57) (61) (64) (66,5) (68)
See 4460 4550 4955 5360 5705 5870 6035 6345
16
Note 16 (10) (35,5) (45) (51, 5) (56,5) (60) (63) (65)
3245 3635 4020 4390 4560 4735 4965
18
(23) (37,5) (46) (51,5) (56) (59,5) (62)
2615 2985 3385 3565 3740 3920
20
(28) (39,5) (46,5) (51,5) (56) (58,5)
1810 2170 2570 2765 2955 3110
22
(11) (31,5) (40,5) (47) (52) (55)
1505 1915 2105 2295 2455
24
(20,5) (34) (42) (47,5) (51)
1375 1565 1750 1920
26
(25,5) (36) (43) (47)
920 1110 1290 1470
28
(11) (29) (38) (43)
720 900 1075
30
(19,5) (31,5) (38)
560 715
32
(24) (32,5)
Minimum boom angle (deg.) for indicated length (no load) 0 23 26
Maximum boom length (m) at 0 deg. boom angle (no load) 33,5
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
+9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle

Boom Main boom length in meters


angle
12,6 15,2 18,3 **21,4 24,4 27,4 30,5
9430 6875 4390 2610 1745 1155 865

(10,4) (13) (16,1) (19,2) (22,2) (25,2) (28,3)
Note: ( ) Reference radii in meters. A6-829-10381 8
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 55
Load charts - Metric 85%

NOTES:
1.All capacities above the bold line are
12,6 m - 39,0 m 10,0 m - 17,0 m 1815 kg 100% 360°
7,3 m based on structural strength of boom
extension and do not exceed 85% of
10,0 m LENGTH 17,0 m LENGTH
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40°
in J-765.
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0521 #0522 #0523 #0541 #0542 #0543
2.The 10,0 m and 17,0 m extension
*5395 lengths may be used for single line
10
(78) lifting service only.
5395 *2745
12
(75,5) (78)
3.For main boom lengths less than 39,0
5395 5175 2745
14 m with the boom extension erected,
(73) (76,5) (75,5)
the rated loads are determined by boom
5395 4620 *4400 2745
16
(70,5) (74) (78) (73,5)
angle. Use only the column which
corresponds to the boom extension
5065 4155 3640 2745 *2740
18 length and offset for which the machine
(68) (71,5) (74) (71,5) (78)
4415 3760 3345 2745 2665 is set up. For boom angles not shown,
20 use rating of the next lower boom
(65,5) (69) (71,5) (69,5) (75)
3565 3420 3085 2745 2520 *2235 angle.
22
(63) (66,5) (69) (67) (72,5) (78)
2875 3130 2855 2740 2295 2010 4. WARNING: Operation of this
24
(60,5) (64) (66) (65) (70,5) (74,5) machine with heavier loads than the
2305 2635 2650 2515 2100 1860 capacities listed is strictly prohibited.
26
(57,5) (61) (63,5) (63) (68) (72) Machine tipping with boom extension
28
1825 2115 2365 2095 1930 1725 occurs rapidly and without advance
(55) (58) (60,5) (60,5) (65,5) (69,5) warning.
1415 1675 1880 1670 1775 1605
30
(51,5) (55) (57) (58) (63) (67)
5.Boom angle is the angle above or
1060 1285 1460 1290 1635 1495 below horizontal of the longitudinal
32
(48,5) (52) (54) (55,5) (60,5) (64,5)
axis of the boom base section after
750 945 1095 975 1365 1395
34 lifting rated load.
(45) (48,5) (50,5) (53) (58) (61,5)
645 775 705 1060 1305
36
(45) (46,5) (50,5) (55,5) (58,5) 6.Capacities listed are with outriggers
785 1015
properly extended and vertical jacks set
38 only.
(52,5) (55,5)
545 720
40 7.When lifting over the main boom nose
(49,5) (52,5)
Minimum boom angle with 10,0 m or 17,0 m extension erected,
(°) for indicated length 40,5 42,5 43,5 46,5 48 49 the outriggers must be fully extended or
(no load) 50% extended (4,7 m spread).
Maximum boom length
(m) at 0° boom angle 24,4 21,4
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10383 8
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

56 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

NOTES:
12,6 m - 39,0 m 10,0 m - 17,0 m 6,1 m - 12,2 m 1815 kg 100% 360°
1.All capacities above the bold line are
7,3 m based on structural strength of boom
23,1 m (17,0 m LENGTH + 1 INSERT) 29,2 m (17,0 m LENGTH + 2 INSERTS) extension and do not exceed 85% of
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40°
in J-765.
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0584 #0585 #0586 #0584 #0585 #0586
2200 2.The 17,0 m extension lengths may be
16 used for single line lifting service only.
(77)
2200 1595
18
(75) (77) 3.For main boom lengths less than
2200 *2400 1595 39,0 m with the boom extension
20
(73) (78) (75,5) erected, the rated loads are
22
2200 2125 1595 *1695 determined by boom angle. Use only
(71) (76) (73,5) (78) the column which corresponds to the
2155 1905 *1835 1595 1585 boom extension length and offset
24
(69) (74) (78) (71,5) (76) for which the machine is set up. For
1945 1710 1580 1485 1395 *1470 boom angles not shown, use rating of
26
(67) (71,5) (75,5) (70) (74) (78)
the next lower boom angle.
1730 1540 1440 1295 1235 1195
28
(65) (69,5) (73) (68) (72,5) (75,5)
4. WARNING: Operation of this
1540 1395 1310 1120 1085 1060
30
(62,5) (67,5) (71) (66) (70,5) (73,5)
machine with heavier loads than the
capacities listed is strictly prohibited.
1375 1255 1190 970 950 935
32 Machine tipping with boom extension
(60,5) (65) (68,5) (64) (68,5) (71,5)
1095 1135 1085 840 835 830 occurs rapidly and without advance
34 warning.
(58,5) (63) (66) (62) (66,5) (69,5)
805 1025 985 665 725 730
36
(56) (60,5) (63,5) (60) (64,5) (67,5) 5.Boom angle is the angle above or
545 910 895 630 635 below horizontal of the longitudinal
38
(54) (58,5) (61) (62,5) (65) axis of the boom base section after
40
635 815 540 550 lifting rated load.
(56) (58,5) (60) (63)

42
590 6.Capacities listed are with outriggers
(56) properly extended and vertical jacks
Minimum boom angle set only.
(°) for indicated length 52,5 53 53,5 58 59 60,5
(no load)
7.When lifting over the main boom
Maximum boom
length (m) at 0° boom 18,3 15,2
nose with 17,0 m extension erected
angle (no load) and inserts, the outriggers must be
NOTE: ( ) Boom angles are in degrees. A6-829-10385 2 fully extended or 50% extended and
#LMI operating code. Refer to LMI manual for operating instructions. vertical jacks set.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 57
Load charts - Metric 85%

12,6 m - 39,0 m 0 kg 100% 360°


7,3 m

#0801
Radius
in
Main boom length in leters
meters
12,6 15,2 18,3 **21,4 24,4 27,4 30,5 33,5 36,6 39,0
+68 025
2.5
(73)
64 800 39 000 39 000
3
(70.5) (74) (77)
58 875 39 000 39 000 18 575
3.5
(68) (72) (75.5) (77.5)
53 650 39 000 39 000 18 575 *17 675
4
(65) (70) (73.5) (76) (78)
48 725 39 000 39 000 18 575 17 675
4.5
(62.5) (68) (72) (75) (77)
43 900 37 750 37 675 18 575 17 675 *17 575
5
(60) (66) (70.5) (73.5) (75.5) (78)
32 125 31 350 30 925 18 575 17 675 17 575 *17 550
6
(54.5) (61.5) (67) (70.5) (73) (75.5) (78)
23,250 23 150 22 900 18 575 17 675 17 575 17 550 *14 475 *11 675
7
(48) (57) (63.5) (67.5) (70.5) (73) (75) (78) (78)
17 700 17 775 17 600 17 425 17 225 17 275 17 250 14 475 11 675 *6620
8
(41) (52.5) (60) (64.5) (68) (71) (73) (74.5) (76) (78)
13 925 14 025 13 975 13 850 14 325 14 825 16 025 14 475 11 675 6620
9
(32.5) (47) (56) (61.5) (65.5) (68.5) (71) (73) (74.5) (75.5)
11 175 11 300 11 350 11 250 11 700 12 175 13 000 13 125 11 675 6620
10
(20) (41.5) (52) (58.5) (63) (66.5) (69) (71) (73) (74)
7615 7700 7745 8155 8565 9065 9265 9465 6620
12
(26) (43) (52) (57.5) (61.5) (65) (67.5) (69.5) (71)
5345 5410 5845 6235 6610 6830 7045 6620
14
(31.5) (44.5) (51.5) (57) (61) (64) (66.5) (68)
See 3695 3780 4190 4590 4935 5155 5370 5575
16
Note16 (10) (35.5) (45) (51. 5) (56.5) (60) (63) (65)
2575 2970 3350 3720 3930 4135 4295
18
(23) (37.5) (46) (51.5) (56) (59.5) (62)
2030 2395 2800 2995 3190 3330
20
(28) (39.5) (46.5) (51.5) (56) (58.5)
1285 1640 2045 2250 2445 2580
22
(11) (31.5) (40.5) (47) (52) (55)
1025 1440 1630 1820 1975
24
(20.5) (34) (42) (47.5) (51)
940 1125 1300 1455
26
(25.5) (36) (43) (47)
520 695 865 1020
28
(11) (29) (38) (43)
635
30
(38)
Minimum boom angle (deg.) for indicated length (no load) 0 24 29 35
Maximum boom length (m) at 0 deg. boom angle (no load) 30,5
#LMI operating code. Refer to LMI manual for instructions.
*This capacity is based upon maximum obtainable boom angle.
Note: ( ) Boom angles are in degrees.
+9 parts of line required to lift this capacity (using aux. boom nose). Refer to Operator's & Safety Handbook for reeving diagram.
Lifting capacities at zero degree boom angle

Boom Main boom length in meters


angle
12,6 15,2 18,3 **21,4 24,4 27,4
9430 6255 3630 1995 1220 700

(10,4) (13) (16,1) (19,2) (22,2) (25,2)
Note: ( ) Reference radii in meters. A6-829-10381 9
**This boom length is with inner-mid fully extended and outer-mid & fly fully retracted.

58 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load charts - Metric 85%

NOTES:
12,6 m - 39,0 m 10,0 m - 17,0 m 0 kg 100% 360°
1.All capacities above the bold line are
7,3 m based on structural strength of boom
10,0 m LENGTH 17,0 m LENGTH extension and do not exceed 85% of
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40°
in
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET J-765.
meters
#0821 #0822 #0823 #0841 #0842 #0843
2.The 10,0 m and 17,0 m extension
*5395 lengths may be used for single line
10
(78)
lifting service only.
5395 *2745
12
(75,5) (78)
3.For main boom lengths less than 39,0
5395 5175 2745 m with the boom extension erected,
14
(73) (76,5) (75,5)
the rated loads are determined by boom
5395 4620 *4400 2745 angle. Use only the column which
16
(70,5) (74) (78) (73,5)
corresponds to the boom extension
4740 4155 3640 2745 *2740 length and offset for which the machine
18
(68) (71,5) (74) (71,5) (78)
is set up. For boom angles not shown,
3730 3760 3345 2745 2665
20 use rating of the next lower boom
(65,5) (69) (71,5) (69,5) (75)
angle.
2940 3225 3085 2745 2520 *2235
22
(63) (66,5) (69) (67) (72,5) (78)
4. WARNING: Operation of this
2305 2580 2855 2420 2295 2010
24
(60,5) (64) (66) (65) (70,5) (74,5)
machine with heavier loads than the
capacities listed is strictly prohibited.
1785 2045 2300 1935 2100 1860
26
(57,5) (61) (63.5) (63) (68) (72)
Machine tipping with boom extension
occurs rapidly and without advance
1 350 1595 1820 1530 1930 1725
28
(55) (58) (60,5) (60,5) (65,5) (69,5) warning.
980 1210 1410 1185 1620 1605
30 5.Boom angle is the angle above or
(51,5) (55) (57) (58) (63) (67)
below horizontal of the longitudinal
665 880 1050 885 1275 1495
32 axis of the boom base section after
(48,5) (52) (54) (55,5) (60,5) (64,5)
590 715 625 980 1245
lifting rated load.
34
(48,5) (50,5) (53) (58) (61.5)
720 940 6.Capacities listed are with outriggers
36 properly extended and vertical jacks set
(55,5) (58,5)
675 only.
38
(55,5)
Minimum boom angle 7.When lifting over the main boom nose
(°) for indicated length 46 46,5 47,5 51 51,5 52 with 10,0 m or 17,0 m extension erected,
(no load) the outriggers must be fully extended or
Maximum boom length 50% extended (4,7 m spread).
(m) at 0° boom angle 21,4 18,3
(no load)
NOTE: ( ) Boom angles are in degrees. A6-829-10383 9
#LMI operating code. Refer to LMI manual for operating instructions.
*This capacity is based upon maximum boom angle.

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 59
Load charts - Metric 85%

NOTES:
12,6 m - 39,0 m 10,0 m - 17,0 m 6,1 m - 12,2 m 0 kg 100% 360° 1.All capacities above the bold line are
7,3 m based on structural strength of boom
23,1 m (17,0 m LENGTH + 1 INSERT) 29,2 m (17,0 m LENGTH + 2 INSERTS) extension and do not exceed 85% of
Radius tipping loads, in accordance with SAE
0° 20° 40° 0° 20° 40°
in J-765.
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET
meters
#0884 #0885 #0886 #0884 #0885 #0886
2200 2.The 17,0 m extension lengths may be
16 used for single line lifting service only.
(77)
2200 1595
18 3.For main boom lengths less than
(75) (77)
2200 *2400 1595 39,0 m with the boom extension
20 erected, the rated loads are
(73) (78) (75,5)
2200 2125 1595 *1695 determined by boom angle. Use only
22
(71) (76) (73,5) (78) the column which corresponds to the
2155 1905 *1835 1,595 1585 boom extension length and offset
24
(69) (74) (78) (71,5) (76) for which the machine is set up. For
1945 1710 1580 1485 1395 *1470 boom angles not shown, use rating of
26
(67) (71,5) (75,5) (70) (74) (78) the next lower boom angle.
1570 1540 1440 1295 1235 1195
28
(65) (69,5) (73) (68) (72,5) (75,5) 4. WARNING: Operation of this
30
1235 1395 1310 1120 1085 1060 machine with heavier loads than the
(62,5) (67,5) (71) (66) (70,5) (73,5) capacities listed is strictly prohibited.
945 1255 1190 875 950 935 Machine tipping with boom extension
32
(60,5) (65) (68,5) (64) (68,5) (71,5) occurs rapidly and without advance
685 1030 1085 600 835 830 warning.
34
(58,5) (63) (66) (62) (66,5) (69,5)
780 985 725 730 5.Boom angle is the angle above or
36
(60,5) (63,5) (64,5) (67,5)
below horizontal of the longitudinal
560 755 500 635 axis of the boom base section after
38
(58,5) (61) (62,5) (65)
lifting rated load.
535 530
40
(58,5) (63)
6.Capacities listed are with outriggers
Minimum boom angle
properly extended and vertical jacks
(°) for indicated length 55,5 56,5 57 60 61,5 61,5
(no load) set only.
Maximum boom
length (m) at 0° boom 18,3 15,2 7.When lifting over the main boom
angle (no load) nose with 17,0 m extension erected
NOTE: ( ) Boom angles are in degrees. A6-829-10385 3 and inserts, the outriggers must be
#LMI operating code. Refer to LMI manual for operating instructions. fully extended or 50% extended and
*This capacity is based upon maximum boom angle. vertical jacks set.

60 THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load handling

Weight reductions for load handling devices Line pulls and reeving information
10 m - 17 m (33 ft - 56 ft) folding boom extension Nominal
Hoists Cable Specs Permissible cable
*10 m (33 ft) ext (erected) 2536 kg 5590 lb line pulls length
*17 m (56 ft) ext (erected) 5924 kg 13,060 lb Main and Aux. 19 mm (3/4 in) Flex-X 7620 kg 185,0 m
*23,2 m (76 ft) ext (1 insert erected) 6201 kg 13,670 lb 35 Rotation resistant (16,800 lb) (607 ft)
(non-rotating)
*29,3 m (96 ft) ext (2 inserts erected) 9380 kg 20,650 lb Min. breaking strength
*Reduction of main boom capacities 38,6 kg (85,800 lb)
(no deduct required for stowed boom extension)
The approximate weight of 19 mm (3/4 in) wire rope is
When lifting over swingaway and/or jib combinations, deduct total weight of all
2,24 kg/m (1.5 lb/ft)
load handling devices reeved over main boom nose directly from swingaway or
jib capacity. Hoist performance
Wire rope Hoist line pulls Drum rope capacity
Auxiliary boom nose: 62 kg 136 lb
layer Two-speed hoist
Hook blocks and headache balls:
Low High
Layer Total
68,0 t (75 USt) 4-sheave 578 kg+ 1275 lb+ Available Available
m (ft) m (ft)
kg (lb)* kg (lb)*
36,3 t (40 USt) 3-sheave 373 kg+ 823 lb+
1 9105 4359 30,8 30,8
9,1 t (10 USt) overhaul ball 258 kg+ 568 lb+ (20,250) (9610) (101) (101)
+ Refer to rating plate for actual weight. 2 8387 3978 33,5 64,3
(18,490) (8770) (110) (211)
NOTE: All load handling devices and boom attachments are considered part of
the load and suitable allowances MUST BE MADE for their combined weights. 3 7116 3660 36,6 100,9 (331)
Weights are for Grove furnished equipment. (17,010) (8070) (120)
4 7144 3388 39,3 140,2
Boom section vs. section extension percentages (15,750) (7470) (129) (460)
Main boom 12,6 15.2 18.3 21.3 24.4 27.4 30.5 33.5 36.6 39.0 5 6650 3157 42,4 182,6
length in m (ft): 41.3 50 60 70 80 90 100 110 120 128
(14,660) (6969) (139) (599)
Boom sections: Percent extension: *Max lifting capacity: 6:37 or 35x7 class =7784 kg (17,160 lb)
Inner-mid 0 30 65 100 100 100 100 100 100 100

Outer-mid 0 0 0 0 7 34 52 69 86 100

Fly 0 0 0 0 14 34 52 69 86 100

Working area diagram

Center of
outrigger
Centerline of boom support

Longitudinal
centerline of
CG of load Over side carrier

Bold lines determine the limiting position of


any load for operation within working areas
indicated.
360°

Over Over
front rear

Center front
stabilizer
cylinder
(if equipped) Center of
Over side rotation

THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove TMS800E The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 61
Symbols glossary

Axles Counterweight Grade Outriggers

Boom Drive Heavy duty jib Radius

Boom elevation Electrical system Hoist Rotation

Boom extension Engine Hookblock Speed


H

Boom length Extension Hydraulic system Steering

Boom nose Frame Lights Suspension

Brakes Fuel tank capacity Oil Swing

Cab Gear Outrigger controls Tires

Transmission

62
Notes

Grove TMS800E 63
Manitowoc Cranes

Regional headquarters
Americas Europe, Middle East, Africa China Greater Asia-Pacific
Manitowoc, Wisconsin, USA Dardilly, France Shanghai, China Singapore
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066 Tel: +65 6264 1188
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955 Fax: +65 6862 4040
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062

Regional offices
Americas
Brazil
China
Beijing
Factories This document is non-contractual. Constant improvement and engineering progress
make it necessary that we reserve the right to make specification, equipment, and
Brazil price changes without notice. Illustrations shown may include optional equipment
Alphaville Chengdu and accessories and may not include all standard equipment.
Passo Fundo
Mexico Guangzhou
China
Monterrey Xian
TaiAn
Chile
Zhangjiagang
Santiago Greater Asia-Pacific
France
Australia
Charlieu
Europe, Middle East, Brisbane
Moulins
Africa Melbourne
Germany
France Sydney
Wilhelmshaven
Baudemont India
India
Cergy Chennai
Pune
Decines Delhi
Italy
Germany Hyderabad
Niella Tanaro
Langenfeld Pune
Portugal
Italy Korea
Baltar
Lainate Seoul
Fânzeres
Netherlands Philippines
USA
Breda Makati City
Manitowoc
Poland Singapore
Port Washington
Warsaw
Shady Grove
Portugal
Baltar
Russia
Moscow
South Africa
Johannesburg
U.A.E.
Dubai
U.K.
Buckingham

©2014 Manitowoc
Form No. TMS800E
Part No. 05-013-2M-0414 www.manitowoccranes.com

You might also like