OLE ELVA
toa AaLce
Soria Meee ae
Sen Uo
ete
eacr ied
LOAD SPAN TABLE QUICK
Most lintel manufacturers will
have a preduct code for easy
reference. In our case the
number’s0' refers tothe cavity
width the product is suitable for;
50mm,
The standard lengths show the
lengths of lintels that the figures
underneath relate to. In this
‘example alllintels from 600mm
upto 1200mm in length.
‘SWLis Safe Working Load or
Serviceable Working Load. This
umber is the load in
Kilonewtons that allintel of this
length can safely bear, In this
case « 2550mm to 300mm lintel
at load ratios of 1:1 or 1:3 can
bear 28 Kilonewtons.
This image shows the lintel
shape including the 50mm cavity
width, and also the dimensions of
both the inner and outer leats; in
this case 98mm, The 44mm
cavity plus the 3mm steel makes
up the 50mm,
Nominal height is the height of
the lintel from the peak down to
the leafs. A general rule of thumb
is the higher the lintel the better
the load bearing capabilities.
Nominal Height (mm) 113) 134 | 140 | 153 | 190 | 190 | 225] 225,
gi) 62| 88 | 74 | 76 (80) 92 | 138/154] 178)
swift) 16 [17 | 22 | 23 [| 20 | 20 (28) 208
fox) 2 | 13 (17) ie |e \ 2 | 2 PB] 2
22) 29 | | 56 | 68 ¥ 133] 162] 162
“The weight of fhe lintelis
Load ratio refers to the Inelsaiferin engin. Thi intel
distribution of lad that should be Skginc the permatre weight
allocated to each leaf increases because the height has
{inmerouter).A 1:1 ratiomeans the increased.
loads equally spi on each leat. A
2:1 ratio means the inner leaf
bears three limes as much as the
outer leat
‘The SWL (Sate Working Load) at a
load ratio of 18:1 is really only
applicable fo eaves lintels. I
would indicate that most ifnot all
RM stands for Resistance
Moment. This relates to the force
the lintel is able to withstand
before it breaks (altnough that is a
very layman explanation). In this
case the lintel at between 600mm,
and 1200mm can withstand a
force of 2.2kNm.
of the load is being placed upon
the inner leat. In this case the lintel
can take a load of 17 KN.