Professional Documents
Culture Documents
Superintending Engineer
(R&B) Circle, Kakinda
MASTER DATA FOR
ROADS FOR THE YEAR 2017-18 ( 5th Rev for AP)
Name of Work :: Improvements to Ryali – Palivela Road (via) Vedhireswaram from km 0.00 to
(It is linked throughout 14.500 in East Godavari District
Estimate )
3.8936567164
5.1641791045
GOVERNMENT OF
ANDHRA PRADESH
AMOUNT OF ESTIMATE
### Lakhs
Km 10/100
Km 10/300
Km 14/400
Km 14/500
Km 0/600
Km 4/400
Km 8/700
Km 13/7
Km 5/6
Km 7/9
Km 8/2
Km 9/5
Km 9/7
12/200
N H 16
Sub Grade BT CC BT CC BT CC BT CC BT CC BT CC
Bridge area
Vedereswaram Bokkavaripalem Rallagandi Steel plant Chillerevu Chinnagullapalem Palivala Lock
A - B ROAD
Kalavagattu
STRIP PLAN SHOWING THE PROVISIONS
Km 10/100
Km 10/300
Km 14/400
Km 14/500
Km 8/700
Km 13/7
Km 5/6
Km 7/6
Km 7/8
Km 7/9
Km 8/2
Km 9/5
Km 9/7
12/200
A - B ROAD
N H 16
CC BT CC BT CC BT CC BT CC BT CC BT CC
Bridge area
Vedereswaram Bokkavaripalem Rallagandi Steel plant Chillerevu Chinnagullapalem Palivala Lock
Kalavagattu
CRUST DETAILS
2.000 0.200 0.100 0.300 0.300 1.000 0.200 0.400 0.200 1.900 1.500 0.700 0.100
8.900
BC 30MM BC BC BC BC BC
M 35 Gr 200MM BM 50MM M 35 Gr BM M 35 Gr BM M 35 Gr BM M 35 Gr BM M 35 Gr BM M 35 Gr
WMM 250MM WMM WMM WMM WMM WMM
DLC 100MM DLC DLC DLC 100 MM DLC 100 MM DLC 100 MM DLC 100 MM
G S B 200 / 100 MM THICK
SUB GRADE 300 THICK
Km 0/600
Km 4/400
Km 5/600
Ubalanka - Ryali Road
N H 16
3.800
DETAILED ESTIMATE
Name of the work: Improvements to Ryali – Palivela Road (via) Vedhireswaram from km 0.00 to 14.500
Sl.
Description of item No Length Breadth Depth Quantity
No
1 2 3 4 5 6 7
1 Scarifying the existing B.T surface to a depth of 50 mm by Mechanical means and disposal of scarified material
with all leads and lifts upto 1000 Mtrs as per MoRT&H (5th Revision) Specn. No.305.4.3
2 Forming embankment with Side earth by mechanical means upto SDR including pre-watering of soil , removal of top
soil, excavation of soils , depositing the soils on the embankment, spreading soil, breaking clods, sectioning , grading
and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of
MoRT&H, including all hire and operational charges of T&P, complete for finished item of work as per MoRT&H
specification 305 (5th revision) (Payment will be made based on level for finished item of work).
3 Forming embankment with borrowed useful earth from outside road boundary by mechanical means upto SDR with
all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed
area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading
and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of
MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of
work as per MoRT&H specification 305 (4th revision) (Payment will be made based on level for finished item of
work).
4 Forming embankment with borrowed useful earth from outside road boundary by mechanical means upto SDR with
all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed
area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading
and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of
MoRT&H, including all hire and operational charges of T&P , complete for finished item of work as per MoRT&H
specification 305 (5th revision) (Payment will be made based on level for finished item of work). Sub Grade
5 Construction of Granular sub-base by providing HBG material confirming to Grading - V of MoRT&H Table 400-1
including cost and conveyance of all materials to work site and spreading in uniform layers with motor grader or by
approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and
compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per
MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. ( Payment will be made
based on levels for finished item of work ).
Before laying of BM
Before laying of BM
km 4 / 400 to 5 / 200 ( 1 x 1 ) 800.00 3.75 3000.00
Before laying of BC
km 4 / 400 to 5 / 600 ( 1 x 1 ) 1200.00 3.75 4500.00
10 Providing and laying of 50mm thick Bituminous Macadam with 100 -120 TPH hot mix plant producing an average
output of 75 tonnes per hour using hard blasted granite crushed aggregates of Grading - II as per table 500-7 of
MoRT&H specificaion 504 (5th Revision) premixed with bituminous binder of VG-30 grade @ 3.4 % by weight of
total mixture, transported to site, laid over a previously prepared surface with Hydrostatic paver finisher with sensor
control to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired
compaction for finished item of work as directed by the Engineer-in-Charge including hire and opeational charges all
T&P and all other contingent charges necessary , complete and as per MoRTH specification No. 504 (5th Revision) .
11 Providing and laying of Bituminous Concrete with 100 - 120 TPH batch type hot mix plant producing an average
output of 75 tones per hour using hard blasted granite crushed aggregates of Grading – II as per Table 500-17 of
specification 507 of MoRT&H (5th revision), premixed with Bituminous binder of VG 30 Grade @ 5.4 % of mix
and filler, transporting the hot mix to work site, laying with hydrostatic sensor paver finisher to the required grade,
level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by
Engineer-in-Charge
specification 507 of MoRT&H (5th revision), premixed with Bituminous binder of VG 30 Grade @ 5.4 % of mix
and filler, transporting the hot mix to work site, laying with hydrostatic sensor paver finisher to the required grade,
level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as
per MoRT&H Specification 507 (5th revision) complete for finished item of work in all respects as directed by
Engineer-in-Charge
13 Providing Dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming
to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate
gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture
content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes
vibratory roller, finishing and curing complete for finished item of work as per MoRT&H (5th Revision)
specification 1500,1700 & 601 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below CC
Pavement.
14 Vibrated cement concrete M 35 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate
conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all
materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other
incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H
specification 1500, 1700, 2100 & 2702 (5th Revision) and as directed by the Engineer-in-Charge for C.C
Pavement.
15 Providing Uncoated Mild Steel bars ( Fe-250 ) of different diameters, wrought and put up bars of all diameters
including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including
cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of
binding wire and all handling charges and operational charges etc., and including over lapping welding if required
etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the
Engineer-in-Charge and as per MoRT&H specification 1600 &2200 (4th revision) and as per I.S.1786 of 1985 .
16 Providing Uncoated Mild Steel bars ( Fe-415 ) of different diameters, wrought and put up bars of all diameters
including cost and conveyance of steel to site and all labour charges for fabrication of reinforcement including
cutting, bending, binding rods, tying grills, placing them in position etc., complete including cost and conveyance of
binding wire and all handling charges and operational charges etc., and including over lapping welding if required
etc., complete for all R.C.C items for finished item of work as per standard drawings, as per the directions of the
Engineer-in-Charge and as per MoRT&H specification 1600 & 2200 (5th revision) and as per I.S.1786 of 1985 .
17 Providing and fixing 25.40mm thick mastic pad for expansion joints including cutting to required size and placing in
position etc., including all labour charges etc., complete as per drawing and Technical specification and directed by
the Engineer in charge.
18 Providing and laying 125 micron polythene sheet on the existing prepared surgface including cost and conveyance of
polythene sheet to work site and labour charges for spreading the sheet and the exising prepared surface as directed
by the engineer in charges etc,. complete.
19 Providing Vacuum dewatered flooring Services including leveling the concrete to be followed by placement of the
bottom and top mats, operation of the vacuum Machine to release the excess free water in the concrete, removal of
the mat after completion of dewatering process, conduction of the initial floating using power floater followed by
finishing using power trowel of adequate capacity. The rate is not inclusive of pin vibration of the concrete,
placement of the concrete and / or provision of the special toppings, but including hire and operational charges of
Generator of adequate capacity and other T&P and labour charges for all operations etc., complete.
Providing Vacuum dewatered flooring Services including leveling the concrete to be followed by placement of the
bottom and top mats, operation of the vacuum Machine to release the excess free water in the concrete, removal of
the mat after completion of dewatering process, conduction of the initial floating using power floater followed by
finishing using power trowel of adequate capacity. The rate is not inclusive of pin vibration of the concrete,
placement of the concrete and / or provision of the special toppings, but including hire and operational charges of
Generator of adequate capacity and other T&P and labour charges for all operations etc., complete.
20 Sawing of concrete Pavement using a self propelled walk behind, petro/electric powered saw of suitable capacity to
give a finished groove of 4mm width and ¼ to 1/3 depth in the cured concrete in the longitudinal and transverse
directions along predetermined lines. The rate and pouring of polysulphide Sealent t the full depth of groove. The
rate is inclusive of the cleaning of the groove after the sawing to remove cementations particles and cement washing
to give a clean dry surface and surface preparations of the sides of the groove to accommodate the sealent material
etc., to give a neat finished look including cost of sealent, hire and operational charges of Generator of Adequate
capacity and other T&P and labour charges for all operations etc., complete.
PIPE CULVERTS
21 Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and
technical specification including setting out, construction of shoring and bracing, removal of stumps and other
deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete
for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as
directed by the Engineer-in-Charge
450mm Dia
km 5 / 600 to 7 / 600 ( 1 x 3 ) 13.00 0.80 1.300 40.56
Body walls ( 2 x 3 ) 4.00 1.20 2.200 63.36
300mm Dia
for cables and utilites crossing
#REF! #REF! ( 48 x 1 ) 7.50 0.30 0.300 32.40
136.32
22 Sand filling in foundation including cost, (excluding seigniorage) and conveyance of all materials to site and
watering, tamping etc., complete for finished item of work as per MoRT&H specification 304 (5th Revision) and as
directed by the Engineer - in - Charge.
23 Providing Vibrated Cement Concrete (1:3:6) mix using 40mm size HBG crushed stone aggregate and fine aggregate
conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges,
centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all
T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and
as directed by the Engineer-in-Charge for foundations.
PIPE PORTION
km 5 / 600 to 7 / 600 ( 1 x 3 ) 13.00 0.60 0.300 7.02
Body walls ( 2 x 3 ) 4.00 0.60 0.300 4.32
11.34 Cum
24 Providing Vibrated Cement Concrete (1:3:6) using 40mm size HBG crushed stone aggregate and fine aggregate
conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges,
centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all
T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2200 (5th Revision) and
as directed by the Engineer-in-Charge for Body walls
25 Providing first class bedding with Granular material below the pipes of Hume pipe culverts suitably compacted /
rammed including cost and conveyance of materials to site etc., complete as per drawing and MoRT&H
Specification 2900 ( 5th Revision) and as directed by the Engineer-in-Charge.
26 Providing, laying Reinforced cement concrete Hume pipes of 450 mm Dia., NP-4 class for pipe culverts including
cost and conveyance of Pipes etc., complete and Labour charges for laying, jointing of 450mm dia. R.C.C Hume
pipes in position including lifting, aligning, lowering and hoisting etc., as per drawing and as per MoRT&H
Specification 2900, 2905 and 2906 (5th Revision) and IRC Special Publication No: 13 and as directed by the
Engineer-in-Charge for finished item of work.
RSI
28 Supplying of hot applied thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @
250gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is
exclusive of surface applied glass bead as per IRC: 35, the material should be of BERGER Company/ BERGER
Equivalent/ Equivalent brand and must comply with the following: a) White index for the product should be in the
range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for
checking up the white index in the department lab. In case the department approves the white index of any vendor,
the department engineer may carryout random checking of the applied products at site against the approved panel. In
case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total
supplied consignment of the said material and will compell the vendor has to replace the full consignment by the
desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man
days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45
degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient
km 5 / and
condition 600 thentoshould
14 / be500 ( per
tested as 847.619047619 ) 1989
BS3262, Part-1, 8900.00
and should pass at the range of '0' degree centigrade
to '-10' degree centigrade D) Adhesion ( : Strong
848 E) Softening
) 3.00 0.10 centigrade F) Dried254.400
point: 102 degree film finish :
km 4 and
Smooth / 400uniform
to G)5 /Night
600Vision:
( High
1 x as directed
2 1 ) by the400.00 0.10
Engineer-in-Charge and confirming to 40.000
IS: 164-1961
Canal
(1st revision side in 1986) and clause conforming to IRC 35-1997
reaffirmed
Bell mouth area ( 2 x 2 2) 30.00 0.15 18.000
Cross roads ( 2 x 15 ) 15.00 0.15 67.500
Zebra markings ( 7 x 16 ) 3.00 0.50 168.000
547.900 Sqm
29 Supplying & Fixing of Molded Shanks Raised Pavement Markers made of plastic body moulded from HIPS(HI-
impact polysterene) or ABS or ASA(Acrylic strene Acrylonitrite) and reflective panels with micro prismatic lens
capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg
tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular
No RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm
and 100 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5
degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and
height not less than 30+/- 2 mm) from the body is to be a minimum value of 700 Kgs. Fixing will be by drilling holes
on the road for the twin shanks to go inside, without nails and using epoxy resin based adhesive as per
manufacturer’s recommendation and complete as directed by the engineer.
31 Supplying and installation of Hazard Markers/Delinators using M.S. angle of size 55x55x6 mm and 120cm high
above ground level painted with two coats of black & white stripes of 15cm wide with first quality synthetic enamel
paint over one coat of appropriate primer of approved brand,colour, with 30cm x 90cm Type – IV of ASTMD 4956-
09 High Intensity Prismatic Retro reflective sheeting of Yellow colour and confirming to IRC 67:2012 fixed over
3MM Alluminium Composite Material having minimum 0.30 mm thick Aluminium skin on both sides with standard
supports consisting of alternately black and Yellow with black stripes in screen printing sloping downward at an
angle of 45 degrees towards the side of the obstruction on which the traffic is to pass and buried into the ground in a
trench of size 30cm x 30cm and 50cm depth filled with CC M-20 including cost and conveyance of all materials,
equipment, machinery and labour with all leads and lifts, loading and un-loading charges necessary for successfull
completion of the work on any road in division as directed by Engineer-in-Charge and conforming to IRC 67-2012
&MORT&H specification No.805 and approved drawings etc., complete for finished item of work.
km 5 / 600 to 0 / 0 ( 2 x 10 ) 20.00
20.00
Nos
32 Providing and fixing Village name board size 600x800 mm made out of Type – IV of ASTMD 4956-09 High
Intensity Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of Green Colour &
White Letters and fixed over 3MM Alluminium Composite Material sheet having minimum 0.30 mm thick
Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle
25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear
height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted with
one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of
height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete
foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and
labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by
Engineer –in-Charge.
Ravulapadu ( 1 x 1 ) 1.00
Vedereswaram ( 2 x 1 ) 2.00
Bokkavaripalem ( 2 x 1 ) 2.00
Rallagandi ( 2 x 1 ) 2.00
Chillirevu ( 2 x 1 ) 2.00
Kothpaeta ( 2 x 1 ) 2.00
Palivala ( 2 x 1 ) 2.00
13.00
33 Providing and fixing Cautionary / Warning sign boards size 900 mm equilateral triangle made out of Type – XI of
ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective sheeting and confirming to IRC
67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by
screen printing in Red colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm
thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S
angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with
clear height of not less than 2.1 m from the ground level to the bottom of the board. The signpost should be painted
with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of
height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M-15 Concrete
foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and
labour with all leads and lift, loading chages necessary for satisfactory completion of the work as directed by
Engineer -in-Charge.
Ravulapadu ( 2 x 1 ) 2.00
Vedereswaram ( 2 x 1 ) 2.00
Bokkavaripalem ( 2 x 1 ) 2.00
Rallagandi ( 2 x 1 ) 2.00
Chillirevu ( 2 x 1 ) 2.00
Kothpaeta ( 2 x 1 ) 2.00
Palivala ( 2 x 1 ) 2.00
Stop boards ( 2 x 5 ) 10.00
Cross roads ( 2 x 7 ) 14.00
38.00
Nos
35 Providing & fixing junction boards of size 1500 x 1050 mm made out of Type – XI of ASTMD 4956-09 wide angle
cube cornered micro Prismatic Retro Retro reflective sheeting Prismatic Retro reflective sheeting and confirming to
IRC 67:2012 for full background of Green Colour & White Letters and fixed over 4MM Alluminium Composite
Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and
fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a
MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the
board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black
and White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4
mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all
materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory
completion of the work as directed by Engineer -in-Charge.
Ravulapadu ( 2 x 1 ) 2.00
Vedereswaram ( 2 x 1 ) 2.00
Kosurinagar ( 2 x 1 ) 2.00
Kothpaeta ( 2 x 1 ) 2.00
Palivala ( 2 x 1 ) 2.00
10.00
36 Providing and erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail,
70 cm above road/ground level, fixed on ISMC series channel vertical post, 150X75X5mm spaced 2m centre-to-
centre, 1.80m high, 1.1m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all
fittings to conform to IS: 1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel
section 150X75X5mm, 330mm long complete as per Clause 810.
DETAILED ESTIMATE
MEASUREMENTS
Sno Description Quantity Rate Per Amount
No LENT BRDT DPT
1 2 3 4 5 6 7 8 9 10
1 Scarifying the existing B.T surface to a depth of 50 mm by Mechanical means and disposal
of scarified material with all leads and lifts upto 1000 Mtrs as per MoRT&H (5th Revision)
Specn. No.305.4.3
32574.00
say 32574.00 sqm 7.00 1.00 228018
2 Forming embankment with Side earth by mechanical means up to SDR including pre-
watering of soil , removal of top soil, excavation of soils , depositing the soils on the
embankment, spreading soil, breaking clods, sectioning , grading and consolidation with 8 to
10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H,
including all hire and operational charges of T&P and (excluding seigniorage) charges,
complete for finished item of work as per MoRT&H specification 305 (4th revision)
(Payment will be made based on levels for finished item of work).
18340.00
say 18340.00 Cum 137.00 1.00 2512580
3 Forming embankment with borrowed useful earth from outside road boundary by
mechanical means up to SDR with all leads and lifts including pre-watering of soil at borrow
area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing
the soil on the embankment, spreading soil, breaking clods, sectioning, grading and
consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of
table 300-2 of MoRT&H, including all hire and operational charges of T&P and (excluding
seigniorage) charges, complete for finished item of work as per MoRT&H specification 305
10170.00
say 10170.00 Cum 233.00 1.00 2369610
4 Forming sub grade with barrowed useful selected earth having MDD of not less than 1.75
Gms/CC from out side road boundary by mechanical means with all leads and lifts including
prewatering of soil at barrow area, removal of top soil, excavation of soils at barrowed area,
conveyance of soil, depositing the soils on the embankment, spreading soils, beaking clods,
sectioning and consoilidation with vibratory road roller @ OMC to meet requirement of
table 300-2 of MoRT&H, including all hire and operational charges of T&P and complete
for finished item of work as per MoRT&H specification 305 ( 5th revision) ( Payment will
be made based on levels for finished item of work).
14781.30
say 14782.00 Cum 651.00 1.00 9623082
8236.00
say 8236.00 Cum 1,976.00 1.00 16274336
6 Providing, Laying, Spreading and compacting graded HBG crushed stone aggregate to Wet
Mix macadem specification ( 5th Revision) as per Table 400-13, including cost of all
materials and including premixing the material with water at OMC in Mechanical mix plant
carriage of mixed material by tipper to site , laying in uniform layers with paver in base
courses on well prepared surface and compacting with Vibratory roller to acheive the desired
density etc., as directed by the Engineer-in-Charge and as per MoRT&H specification.406
(5th revision) for finished item of work.
6224.90
say 6225.00 Cum 2,164.00 1.00 13470900
7 Providing and applying prime coat with bitumen emulsion (SS1) Bulk using emulsion
pressure distributor on prepared surface of granular base including clearing of road surface
and spraying emulsion at the rate of 0.70 kg/sqm using emulsion pressure distributor for
finished item of work etc., complete as per MoRT&H Specification 502 (5th revision) and
as directed by the Engineer-in-charge
30200.00
say 30200.00 Cum 42.20 1.00 1274440
8 Providing and applying tack coat with bitumen VG 10 (Bulk) using Bitumen pressure
distributor at the rate of 0.25 kgs per sqm on the prepared Granular surface treated with
primer cleaned with mechanical broom for finished item of work as per MoRT&H
Specification 503 (5th revision) and as directed by the Engineer-in-Charge.
30200.00
say 30200.00 Cum 9.90 1.00 298980
9 Providing and applying tack coat with bitumen VG 10 (Bulk) using Bitumen pressure
distributor at the rate of 0.20 kgs per sqm on the prepared bituminous surface cleaned with
mechanical broom for finished item of work as per MoRT&H Specification 503 (5th
revision) and as directed by the Engineer-in-Charge.
36200.00
say 36200.00 Cum 8.30 1.00 300460
MEASUREMENTS
Sno Description Quantity Rate Per Amount
No LENT BRDT DPT
1 2 3 4 5 6 7 8 9 10
10 Providing and laying of 50mm thick Bituminous Macadam with 100 -120 TPH hot mix plant
producing an average output of 75 tonnes per hour using hard blasted granite crushed aggregates of
Grading - II as per table 500-7 of MoRT&H specificaion 504 (5th Revision) premixed with
bituminous binder of VG-30 grade @ 3.4 % by weight of total mixture, transported to site, laid over
a previously prepared surface with Hydrostatic paver finisher with sensor control to the required
grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired
compaction for finished item of work as directed by the Engineer-in-Charge including hire and
opeational charges all T&P and all other contingent charges necessary , complete and as per
MoRTH specification No. 504 (5th Revision) .
1660.00
say 1660.00 Cum 5,605.00 1.00 9304300
11 Providing and laying of Bituminous Concrete with 100 - 120 TPH batch type hot mix plant
producing an average output of 75 tones per hour using hard blasted granite crushed aggregates of
Grading – II as per Table 500-17 of specification 507 of MoRT&H (5th revision), premixed with
Bituminous binder of VG 30 Grade @ 5.4 % of mix and filler, transporting the hot mix to work site,
laying with hydrostatic sensor paver finisher to the required grade, level and alignment, rolling with
smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H
Specification 507 (5th revision) complete for finished item of work in all respects as directed by
Engineer-in-Charge
996.00
say 996.00 Cum 7,190.00 1.00 7161240
12 Forming shoulders with borrowed useful seclected earth having MDD of not less than 1.75 gms/cc
from outside road boundary with a lead of 21 Kms by mechnical means with all leads and lifts
including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed
area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods,
sectioning and consolidation with vibratory road roller @ OMC to meet requirement of table 300-2
of MORT&H including all hire and operational charges of T&P , complete for finished item of work
as per MORT&H specification 305 (5th revision) (Payment will be made based on levels for finished
item of work)
3940.00
say 3940.00 cum 620.00 1.00 2442800
CC Pavement
13 Providing Dry lean cement concrete Sub- base over a prepared sub-grade with coarse and
fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,
aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per
table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be
determined during trial length construction, concrete strength not to be less than 10 Mpa at 7
days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor,
compacting with 8-10 tonnes vibratory roller, finishing and curing complete for finished item
of work as per MoRT&H (5th Revision) specification 1500,1700 & 601 (5th Revision) and
as directed by the Engineer-in-Charge for base coarse below CC Pavement.
3430.13
say 3431.00 Cum 2,660.00 1.00 9126460
14 Vibrated cement concrete M 35 grade using 20mm & 10mm HBG crushed stone aggregate
(Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-
2) including cost, (excluding seigniorage) conveyance of all materials to site and labour
charges, centering, machine mixing, laying, vibrating, curing etc., including all other
incidental and operational charges of all T&P etc., complete for finished item of work as per
MoRT&H specification 1500, 1700, 2100 & 2702 (5th Revision) and as directed by the
14 Vibrated cement concrete M 35 grade using 20mm & 10mm HBG crushed stone aggregate
Sno (Coarse aggregate conformingMEASUREMENTS
Description to table 1000-1 and fine aggregate conforming to
Quantity table 1000-
Rate Per Amount
2) including cost, (excluding
No seigniorage)
LENT BRDT conveyance
DPT of all materials to site and labour
1
charges, centering,
2
machine
3
mixing,
4
laying,
5
vibrating,
6
curing 7etc., including
8
all other
9 10
incidental and operational charges of all T&P etc., complete for finished item of work as per
MoRT&H specification 1500, 1700, 2100 & 2702 (5th Revision) and as directed by the
Engineer-in-Charge for C.C Pavement.
6845.50
say 6846.00 Cum 5,120.00 1.00 35051520
15 Providing Uncoated Mild Steel bars ( Fe-250 ) of different diameters, wrought and put up
bars of all diameters including cost and conveyance of steel to site and all labour charges for
fabrication of reinforcement including cutting, bending, binding rods, tying grills, placing
them in position etc., complete including cost and conveyance of binding wire and all
handling charges and operational charges etc., and including over lapping welding if required
etc., complete for all R.C.C items for finished item of work as per standard drawings, as per
the directions of the Engineer-in-Charge and as per MoRT&H specification 1600 &2200
(5th revision) and as per I.S.1786 of 1985 .
5.60
say 6.00 Mton 44,753.00 1.00 268518
16 Providing HYSD bars ( Fe-415 ) of different diameters, wrought and put up bars of all
diameters including cost and conveyance of steel to site and all labour charges for fabrication
of reinforcement including cutting, bending, binding rods, tying grills, placing them in
position etc., complete including cost and conveyance of binding wire and all handling
charges and operational charges etc., and including over lapping welding if required etc.,
complete for all R.C.C items for finished item of work as per standard drawings, as per the
directions of the Engineer-in-Charge and as per MoRT&H specification 1600 &2200 (5th
revision) and as per I.S.1786 of 1985 for foundations of R.C.C items.
3.10
say 3.50 Mton 43,596.00 1.00 152586
17 Providing 25.4 mm mastic pads for Longitudinal joints, Transversal expansion joints and
Construction joints of approved quality including cost, conveyance and placing in position,
etc., complete as directed by the Engineer-in-charge.
148.40
say 149.00 Sqm 839.00 1.00 125011
18 Providing and laying 125 micron polythene sheet on the existing prepared surgface including
cost and conveyance of polythene sheet to work site and labour charges for spreading the
sheet and the exising prepared surface as directed by the engineer in charges etc,. complete.
34077.50
say 34078.00 Sqm 15.25 1.00 519690
20 Sawing of concrete Pavement using a self propelled walk behind, petro/electric powered
saw of suitable capacity to give a finished groove of 4mm width and ¼ to 1/3 depth in the
cured concrete in the longitudinal and transverse directions along predetermined lines. The
rate and pouring of polysulphide Sealent t the full depth of groove. The rate is inclusive of
the cleaning of the groove after the sawing to remove cementations particles and cement
washing to give a clean dry surface and surface preparations of the sides of the groove to
accommodate the sealent material etc., to give a neat finished look including cost of sealent,
hire and operational charges of Generator of Adequate capacity and other T&P and labour
charges for all operations etc., complete.
1068.00
say 1068.00 RM 65.10 1.00 69527
PIPE CULVERTTS
21 Earthwork excavation in soils upto SDR by mechanical means for foundations of structures
as per drawing and technical specification including setting out, construction of shoring and
bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back
filling the excavation earth to the extent required etc., complete for finished item of work,
excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as
directed by the Engineer-in-Charge
136.32
say 137.00 Cum 87.00 1.00 11919
22 Sand filling in foundation including cost, (excluding seigniorage) and conveyance of all
materials to site and watering, tamping etc., complete for finished item of work as per
MoRT&H specification 304 (5th Revision) and as directed by the Engineer - in - Charge.
20.88
say 21.00 Cum 443.00 1.00 9303
23 Providing Vibrated Cement Concrete (1:3:6) mix using 40mm size HBG crushed stone
aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost,
conveyance of all materials to site and labour charges, centering, machine mixing, laying,
Vibrating, curing etc., including all other incidental and operational charges of all T&P etc.,
complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th
Revision) and as directed by the Engineer-in-Charge for foundations.
11.34
say 12.00 Cum 3,671.00 1.00 44052
24 Providing Vibrated Cement Concrete (1:3:6) using 40mm size HBG crushed stone aggregate
and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of
all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing
etc., including all other incidental and operational charges of all T&P etc., complete for
finished item of work as per MoRT&H specification 1500,1700, 2200 (5th Revision) and
as directed by the Engineer-in-Charge for Body walls
24 Providing Vibrated Cement Concrete (1:3:6) using 40mm size HBG crushed stone aggregate
MEASUREMENTS
Sno and fine aggregate conforming
Description to table 1000-2 of MoRT&H including
Quantity cost, conveyance
Rate of
Per Amount
all materials to site and No
labour charges,
LENT BRDTcentering, machine
DPT mixing, laying, vibrating, curing
1
etc., including
2
all other 3incidental4 and operational
5
charges of all7 T&P etc., complete
6 8
for
9 10
finished item of work as per MoRT&H specification 1500,1700, 2200 (5th Revision) and
as directed by the Engineer-in-Charge for Body walls
51.06
say 52.00 Cum 4,038.00 1.00 209976
25 Providing first class bedding with Granular material below the pipes of Hume pipe culverts
suitably compacted / rammed including cost and conveyance of materials to site etc.,
complete as per drawing and MoRT&H Specification 2900 ( 5th Revision) and as directed
by the Engineer-in-Charge.
33.75
say 34.00 Cum 1,011.00 1.00 34374
26 Providing, laying Reinforced cement concrete Hume pipes of 300 mm Dia., NP-4 class for
pipe culverts including cost and conveyance of Pipes etc., complete and Labour charges for
laying, jointing of 300mm dia. R.C.C Hume pipes in position including lifting, aligning,
lowering and hoisting etc., as per drawing and as per MoRT&H Specification 2900, 2905
and 2906 (5th Revision) and IRC Special Publication No: 13 and as directed by the
Engineer-in-Charge for finished item of work.
360.00
say 360.00 RM 1,060.00 1.00 381600
27 Providing, laying Reinforced cement concrete Hume pipes of 450 mm Dia., NP-4 class for
pipe culverts including cost and conveyance of Pipes etc., complete and Labour charges for
laying, jointing of 450mm dia. R.C.C Hume pipes in position including lifting, aligning,
lowering and hoisting etc., as per drawing and as per MoRT&H Specification 2900, 2905
and 2906 (5th Revision) and IRC Special Publication No: 13 and as directed by the
Engineer-in-Charge for finished item of work.
37.50
say 37.50 RM 1,574.00 1.00 59025
RSI
28 Supplying of hot applied thermoplastic road marking compound, 2.5mm thick including
reflectorising glass beads @ 250gms with Reflectorising Glass Beads on Bituminous
Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass
bead as per IRC: 35, the material should be of BERGER Company/ BERGER Equivalent/
Equivalent brand and must comply with the following: a) White index for the product
should be in the range of 60-70 when measured against standard reference. The applied panel
7/8 number must be submitted for checking up the white index in the department lab. In case
the department approves the white index of any vendor, the department engineer may
carryout random checking of the applied products at site against the approved panel. In case
of any major deviation, beyond acceptance limit, department reserve the right to cancel or
reject the total supplied consignment of the said material and will compell the vendor has to
replace the full consignment by the desired material as per approved panel at his own cost
and additional demurrages may be claimed due to loss of man days (as per the rules of the
department). b) Luminance factor of the material should be in the range of 80-85% at 45
degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7
days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and
should pass at the range of '0' degree centigrade to '-10' degree centigrade D) Adhesion :
Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform
G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961
replace the full consignment by the desired material as per approved panel at his own cost
and additional demurrages may be claimed due to loss of man days (as per the rules of the
department). b) Luminance factor of the material should be in the range of 80-85% at 45
MEASUREMENTS
Sno degreeDescription
centigrade as per AASTHOM 249. c) Crack resistance:Quantity
The applied panelRate Per7
cured for Amount
No LENT BRDT DPT
days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and
1 should pass 2 at the range3of '0' degree
4 5
centigrade to6 '-10' degree 7centigrade D) 8Adhesion9 : 10
Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform
G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961
(1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997
547.90
say 548.00 Sqm 702.00 1.00 384696
29 Supplying & Fixing of Molded Shanks Raised Pavement Markers made of plastic body
moulded from HIPS(HI-impact polysterene) or ABS or ASA(Acrylic strene Acrylonitrite)
and reflective panels with micro prismatic lens capable of providing total internal reflection
of the light entering the lens face and shall support a load of 16000 kg tested in accordance to
ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular
No RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height, width and length shall not
exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sqcm on each
side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the
integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than
30+/- 2 mm) from the body is to be a minimum value of 700 Kgs. Fixing will be by drilling
holes on the road for the twin shanks to go inside, without nails and using epoxy resin based
adhesive as per manufacturer’s recommendation and complete as directed by the engineer.
1742.00
say 1742.00 Nos 316.00 1.00 550472
30 Supplying and installation of delineators (Roadway indicators) not less than 800mm high
above ground level. The delineator shall have a core and shell construction which shall be
made of tough, high impact resistant, injection-molded, thermoplastic outer body. The inner
core shall consist of powder coated or painted Mild steel of minimum thickness 1.0mm. The
delineator should have top retro-reflective unit consisting of white color micro prismatic non
metallic retro-reflective sheeting of minimum exposed area of 125 cm2 and bottom retro-
reflective unit consisting of red color micro prismatic non metallic retro-reflective sheeting
of minimum exposed area of 35 cm2 confirming to ASTM D4956 type XI standards. The
delineators shall be fixed to the ground by inserting the root of the delineator up to the
marked portion and by firm concrete filling as per the instructions by engineer in-charge.
350.00
say 350.00 Nos 2,285.00 1.00 799750
31 Supplying and installation of Hazard Markers/Delinators using M.S. angle of size 55x55x6
mm and 120cm high above ground level painted with two coats of black & white stripes of
15cm wide with first quality synthetic enamel paint over one coat of appropriate primer of
approved brand,colour, with 30cm x 90cm Type – IV of ASTMD 4956-09 High Intensity
Prismatic Retro reflective sheeting of Yellow colour and confirming to IRC 67:2012 fixed
over 3MM Alluminium Composite Material having minimum 0.30 mm thick Aluminium
skin on both sides with standard supports consisting of alternately black and Yellow with
black stripes in screen printing sloping downward at an angle of 45 degrees towards the side
of the obstruction on which the traffic is to pass and buried into the ground in a trench of size
20.00
say 20.00 Nos 3,210.00 1.00 64200
32 Providing and fixing Village name board size 600x800 mm made out of Type – IV of
ASTMD 4956-09 High Intensity Prismatic Retro reflective sheeting and confirming to IRC
67:2012 for full background of Green Colour & White Letters and fixed over 3MM
MEASUREMENTS
Sno Description Quantity Rate Per Amount
No LENT BRDT DPT
1 2 3 4 5 6 7 8 9 10
67:2012 for full background of Green Colour & White Letters and fixed over 3MM
Alluminium Composite Material sheet having minimum 0.30 mm thick Aluminium skin on
both sides with back side painted grey colour and fixed over back support frame of M.S
angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post
of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the
bottom of the board. The signpost should be painted with one coat of red oxide paint and 2
coats of synthetic enamel paint Black and White colour with bands of 30cm of height. The
13.00
say 13.00 Nos 6,023.00 1.00 78299
33 Providing and fixing Cautionary / Warning sign boards size 900 mm equilateral triangle
made out of Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro
reflective sheeting and confirming to IRC 67:2012 for full background of White colour and
letters/logos done by screen printing in Black colour, boarders by screen printing in Red
colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm
thick Aluminium skin on both sides with back side painted grey colour and fixed over back
support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted
on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the
ground level to the bottom of the board. The signpost should be painted with one coat of red
38.00
say 38.00 Nos 6,226.00 1.00 236588
34 Providing and fixing Mandatory / Regulatory sign boards size 900 mm circle made out of
Type – XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro reflective
sheeting and confirming to IRC 67:2012 for full background of White colour and
letters/logos done by screen printing in Black colour, boarders by screen printing in Red
colour and fixed over 4MM Aluminium Composite Material sheet having minimum 0.5 mm
thick Aluminium skin on both sides with back side painted grey colour and fixed over back
support frame of M.S angle 25x25x3mm all roundand fixing with 35x35x4mm and mounted
on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the
ground levelto the bottom of the board. The signpost should be painted with one coat of red
oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of
30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to
the ground by M-15 Concrete foundation of size 450x450x600mm including cost and
conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading
charges necessary for satisfactory completion of the work as directed by Engineer -in-
Charge.
16.00
Stop boards say 16.00 Nos 9,342.00 1.00 149472
35 Providing & fixing junction boards of size 1500 x 1050 mm made out of Type – XI of
ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro Retro reflective sheeting
Prismatic Retro reflective sheeting and confirming to IRC 67:2012 for full background of
Green Colour & White Letters and fixed over 4MM Alluminium Composite Material sheet
having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey
colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing
with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of
not less than 2.1 m from the ground level to the bottom of the board. The signpost should be
painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and
White colour with bands of 30cm of height. The signpost shall be firmly fixed with MS
base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size
450x450x600mm including cost and conveyance of all materials ,equipment, machinery and
labour with all leads and lift, loading charges necessary for satisfactory completion of the
having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey
colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing
with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of
MEASUREMENTS
Sno not less than 2.1 m from the ground level to the bottom of the board.
Description Quantity The signpost
RateshouldPer
be Amount
painted with one coat ofNored oxide
LENTpaint
BRDT DPT of synthetic enamel paint Black and
and 2 coats
1 White colour2 with bands3of 30cm4 of height.5 The signpost
6 shall 7be firmly fixed8 with MS9 10
base angle 35x35x4 mm in to the ground by M-15 Concrete foundation of size
450x450x600mm including cost and conveyance of all materials ,equipment, machinery and
labour with all leads and lift, loading charges necessary for satisfactory completion of the
work as directed by Engineer -in-Charge.
10.00
say 10.00 Nos 23,875.00 1.00 238750
36 Providing and erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated
sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical
post, 150X75X5mm spaced 2m centre-to-centre, 1.80m high, 1.1m below ground/road level,
all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:
1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel
section 150X75X5mm, 330mm long complete as per Clause 810.
1030.00
say 1030.00 RM 2,615.00 1.00 2693450
TOTAL 117750881
Superintending Engineer
(R&B) Circle, Kakinda
GENERAL ABSTRACT
NAME OF THE WORK :
Sl
DESCRIPTION AMOUNT Rs
No
PART - A
1 Road work 117750881
C D WORKS
1 Culvert 2805982
PART - B
Total Rs 150000000
7.00 Mts
BC 30MM TH
.
BM 50MM T E S 1.0M
E S 150MM
H.
THICK WMM 150M Wide
M TH.
WMM 100 MM
TH 1.82
1.82
GSB 200 MM TH 3.66 Mts
MM TH
2.10
SUB GRADE 300
2.10
Assistant Engineer (R&B), Dy. Executive Engineer (R&B), Executive Engineer (R&B), Superintending Engineer (R&B),
(R&B) Section : Ravulapalem (R&B) Sub-divn., : Kothpaeta (R&B) Division :Amalapuram (R&B) Circle : Kakinada
RYALI - PALIVELA ROAD Road form km 0.00 to 14.500
7.00 Mts
Assistant Engineer (R&B), Dy. Executive Engineer (R&B), Executive Engineer (R&B), Superintending Engineer (R&B),
(R&B) Section : Ravulapalem (R&B) Sub-divn., : Kothpaeta (R&B) Division :Amalapuram (R&B) Circle : Kakinada
Name of Work :- Improvements to Ryali – Palivela Road (via) Vedhireswaram from km 0.00 to 14.500 in East Godavari District
Superintending Engineer
(R&B) Circle, Kakinda
LEAD CALCULATION FOR VARIOUS MATERIALS UPTO CENTER OF THE WORKING STRETCH
Name of the work: Improvements to Ryali – Palivela Road (via) Vedhireswaram from km 0.00 to 14.500
-:oOo:-
B) For Gravel:
Gravel from Kadium Quarry
a) Cart track length = = 2.000 kms
b) Metalled road length:
Quarry at Kadium Quarry
From km 60 / 200 to 55 / 600 of Kakinada - Rajahmundry Road = 4.600 kms
From km 918 / 800 to 942 / 400 of NH16 = 23.350 kms
Working K.M. 4/9 of Ryali - Palevala road 29.950
Site average Lead = 6.950 kms
c) Total lead = 36.900 kms
Or say: 37.000 kms
C) For Sand :
Sand Quarry at River Godavari at Ravulapalem
River to Z.P Road Point = = 1.000 kms
From km 942 / 400 to 938 / 900 of NH16 = 3.500 kms
Working K.M. 4/9 of Ryali - Palevala road 4.500
Site average Lead = 6.950 kms
Total lead = 11.450 kms
Or say: 11.000 kms
Assistant Engineer (R&B), Dy. Executive Engineer (R&B), Executive Engineer (R&B),
(R&B) Section : Ravulapalem (R&B) Sub-divn., : Kothapeta (R&B) Division : Amalapuram
Superintending Engineer
(R&B) Circle, Kakinada
STRIP PLAN
Pipes
8 Kms 59/692
A-B Road
0/595 36/7 1.6 km
0/210
4/8.
942/4 940/150 938/9 907/0 719/4
N H - 16
918/8
5/6. 60/2
R Wall
Working reach
K-R road
14/5
RMR.
Date :: 26-Mar-18 SSR :: 2017-18
Machine Crushing
(-) Stacking Charges
Conveyance rate (-)
Municipal Area
unloading charges
Stacking Charges
Blasting Charges
Allowance
Average Lead
Initial Rate
Conveyance
Charges
Seigniorage
Loading &
of Material
Charging
Weighted
Charges
Stacking
TOTAL RATE
rate
S.N
Nature of Metal
o
2 Sand for Mortar 11.00 129.56 0.00 61.70 170.00 129.56 170.00 -- -- 0.00 0.0 0.00 299.56
3 Sand for Concrete 11.00 129.56 0.00 61.70 95.00 129.56 95.00 -- -- 0.00 0.0 0.00 224.56
4 Sand for Filling 11.00 129.56 0.00 61.70 95.00 129.56 95.00 -- -- 0.00 0.0 0.00 224.56
4 Sand for Filling 11.00 129.56 0.00 61.70 95.00 129.56 95.00 -- -- 0.00 0.0 0.00 224.56
5 Cement 3881.61 3881.61
6 HYSD Steel 32627.11 32627.11
7 MS Steel 34322.03 34322.03
8 6 mm Mild Steel 34067.80 34067.80
Assistant Engineer Deputy Executive Engineer Executive Engineer Superintending Engineer
(R&B) Section, Ravulapalem (R&B) Sub division, Kothapeta (R&B) Divisoin, Amalapuram (R&B) Circle, Kakinda
2 3 4 5 6 7
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered
concrete surfaces
2 Certified that the Leads provided in the lead statement are the shortest.
3 Certified that the Distances noted herein are correct.
4 Certified that the quarries are nearest and are having sufficient yield.
5 Certified that the routs shown are nearest.
6 Certified that the description of the variety of materials noted are correct to the
best of my knowledge.
7 Certified that the Land available for the road formation is sufficient and no land
acquisition is required
8 Certified that the Hard Blasted Trap is obtained by Blasting, Hence Blasting
charges are allowed on Trap metal.
9 Certified that the reach in the Estimate is not proposed in any other schemes.
10 Certified that the side earth is not available in the reaches from KM 0.000 to
14.500 along with proposed road. Hence, formation of earth work & shoulders
is proposed with carted earth with 37 K.Ms. lead.
Superintending Engineer
(R&b) Circle, KAKINADA
OTHER MATERIALS SS5 HBG METAL
LABOUR 2017-18
2017-18 (Excluding blasting
Charges)
DETAILS RATE SIZES RATE
2017-18
GRAVEL 110.00 SS6 506.40
MSAND 170.00 SS10 659.20
DETAILS RATE
CSAND 95.00 SS12 782.40
MASONI 465.00 FSAND 95.00 SS20 986.40
MASONII 420.00 CRS 274.30 SS25 947.20
Mate 425.00 ROUGH 240.00 SS40 590.40
Mazdoor skilled 433.50 BOND600 47.60 SS50 434.30
Mazdoor unskilled 370.00 SS150 90.50 SS60 399.05
Black Smith 465.00 SS225 138.00 SS65 360.95
SS300 156.00 SS75 289.50
QS25 43.80 Metals BLAST 70.00
QS40 50.50 CRS BLAST3 82.00
RR BLAST2 70.00
Cement concrete batch mix plant @ 75 cum per hour 1151.10 1269.50
Pre moulded Joint filler, 25 mm thick for expansion joint. 262.00 ( M141)
Joint Sealent 58.00 ( M120)
Super plastisizer admixture IS marked as per 9103-1999 @ 0.5 per cent by weight of cement 43.00 ( Sl 70 WR)
From
data Entry
IRC HBG METAL HMP 49.00
Metal/
SIZES RATE 45.00
Stone Qry
IRC2.36 293.35
IRC5 480.00
MASTIC PADS METAL LEADS & RAT
IRC9 624.75 25.4 mm 839.00 BMS-W.20 2017-18 after GST
IRC12 742.85 12.7 mm 481.00 BMS-W.21 LEAD NOTATION
IRC19 937.15 PAINTS 202.00 MLOAD
IRC25 899.05 MUNLOAD
IRC40 560.00 MSTACK
IRC50 434.30
IRC60 399.05 SCRAP from SCARIFYING
IRC65 360.95 2017-18 0.00 0
IRC75 289.50 LEAD NOTATION RATE From SSR 1 MT1
DUST 333.00 MLOAD 40.00 2 MT2
MUNLOAD 20.00 3 MT3
4 MT4
5 MT5
6 MT6
7 MT7
8 MT8
9 MT9
WORKS
10 MT10
11 MT11
12 MT12
13 MT13
WORKS RATE
14 MT14
EWBULK 15 MT15
EW20A 16 MT16
ES20B 17 MT17
18 MT18
19 MT19
20 MT20
21 MT21
22 MT22
23 MT23
24 MT24
25 MT25
26 MT26
27 MT27
4 CLASS PIPES 28 MT28
CEMENT & STEEL 29 MT29
2017-18 30 MT30
BASIC
MATERIAL PRICE
CURRENT 31 MT31
PRICE
First 5 km Next 1 km FOR PIPES 32 MT32
Lead Lead
CEMENT 3882.00 3881.61 33 MT33
98.120 4.56 HYSD 32627.11 34 MT34
131.200 5.29 MS6 40570.00 34067.80 35 MT35
207.270 9.98 MS 34322.03 36 MT36
251.370 10.86 BWIRE 51.00 37 MT37
59.54 2.05 38 MT38
46.31 1.32 39 MT39
43.00 1.18 40 MT40
41 MT41
42 MT42
2007-08 2008-09 2017-18 old 43 MT43
44 MT44
2400.00 2760.00 2616.90 45 MT45
2260.00 2600.00 3220.00 46 MT46
1950.00 2250.00 2888.60 47 MT47
1150.00 1320.00 1650.00 48 MT48
500.00 575.00 953.70 49 MT49
1350.00 1550.00 2721.70 50 MT50
1150.00 1320.00 1182.00 51 MT51
300.00 345.00 630.00 52 MT52
300.00 345.00 425.00 53 MT53
320.00 370.00 472.10 54 MT54
1150.00 1320.00 1650.00 55 MT55
250.00 290.00 375.00 56 MT56
820.00 940.00 1500.00 57 MT57
600.00 690.00 860.00 58 MT58
28200.00 59 MT59
24200.00 60 MT60
21700.00 61 MT61
13500.00 15525.00 19200.00 62 MT62
3060.00 63 MT63
950.00 1090.00 2250.00 64 MT64
470.00 540.00 1182.00 65 MT65
1350.00 1320.00 1650.00 66 MT66
3190.00 67 MT67
900.00 1035.00 1347.00 68 MT68
219.00 69 MT69
800.00 920.00 1257.00 70 MT70
1350.00 1550.00 1850.00 71 MT71
950.00 1090.00 1320.00 72 MT72
800.00 920.00 1126.00 73 MT73
3.90 4.50 953.70 74 MT74
3.90 4.50 953.70 75 MT75
32.00 40.00 58.00 76 MT76
1800.00 2070.00 2695.00 77 MT77
1268.00 1268.00 1268.00 78 MT78
150.00 170.00 219.00 79 MT79
1268.00 90.00 133.00 80 MT80
200.00 81 MT81
65.00 82 MT82
300.00 345.00 492.60 83 MT83
300.00 345.00 415.00 84 MT84
300.00 345.00 425.00 85 MT85
1289.90 87 MT87
88 MT88
89 MT89
90 MT90
91 MT91
92 MT92
93 MT93
94 MT94
95 MT95
96 MT96
97 MT97
98 MT98
99 MT99
100 MT100
101 MT101
102 MT102
103 MT103
104 MT104
105 MT105
106 MT106
107 MT107
108 MT108
109 MT109
110 MT110
111 MT111
112 MT112
113 MT113
114 MT114
115 MT115
116 MT116
117 MT117
118 MT118
119 MT119
120 MT120
121 MT121
122 MT122
123 MT123
124 MT124
125 MT125
126 MT126
127 MT127
128 MT128
129 MT129
130 MT130
131 MT131
132 MT132
133 MT133
134 MT134
135 MT135
136 MT136
137 MT137
138 MT138
139 MT139
140 MT140
141 MT141
142 MT142
143 MT143
144 MT144
145 MT145
146 MT146
147 MT147
148 MT148
149 MT149
150 MT150
151 MT151
152 MT152
153 MT153
154 MT154
155 MT155
156 MT156
157 MT157
158 MT158
159 MT159
160 MT160
161 MT161
162 MT162
163 MT163
164 MT164
165 MT165
166 MT166
167 MT167
168 MT168
169 MT169
170 MT170
171 MT171
172 MT172
173 MT173
174 MT174
175 MT175
176 MT176
177 MT177
178 MT178
179 MT179
180 MT180
181 MT181
182 MT182
183 MT183
184 MT184
185 MT185
186 MT186
187 MT187
188 MT188
189 MT189
190 MT190
191 MT191
192 MT192
193 MT193
194 MT194
195 MT195
196 MT196
197 MT197
198 MT198
199 MT199
200 MT200
201 MT201
202 MT202
203 MT203
204 MT204
205 MT205
206 MT206
207 MT207
208 MT208
209 MT209
210 MT210
211 MT211
212 MT212
213 MT213
214 MT214
215 MT215
216 MT216
217 MT217
218 MT218
219 MT219
220 MT220
221 MT221
222 MT222
223 MT223
224 MT224
225 MT225
226 MT226
227 MT227
228 MT228
229 MT229
230 MT230
231 MT231
232 MT232
233 MT233
234 MT234
235 MT235
236 MT236
237 MT237
238 MT238
239 MT239
240 MT240
241 MT241
242 MT242
243 MT243
244 MT244
245 MT245
246 MT246
247 MT247
248 MT248
249 MT249
250 MT250
251 MT251
252 MT252
253 MT253
254 MT254
255 MT255
256 MT256
257 MT257
258 MT258
259 MT259
260 MT260
261 MT261
262 MT262
263 MT263
264 MT264
265 MT265
266 MT266
267 MT267
268 MT268
269 MT269
270 MT270
271 MT271
272 MT272
273 MT273
274 MT274
275 MT275
276 MT276
277 MT277
278 MT278
279 MT279
280 MT280
281 MT281
282 MT282
283 MT283
284 MT284
285 MT285
286 MT286
287 MT287
288 MT288
289 MT289
290 MT290
291 MT291
292 MT292
293 MT293
294 MT294
295 MT295
296 MT296
297 MT297
298 MT298
299 MT299
300 MT300
301 MT301
302 MT302
303 MT303
304 MT304
305 MT305
306 MT306
307 MT307
308 MT308
309 MT309
310 MT310
311 MT311
312 MT312
313 MT313
314 MT314
315 MT315
316 MT316
317 MT317
318 MT318
319 MT319
320 MT320
321 MT321
322 MT322
323 MT323
324 MT324
325 MT325
326 MT326
327 MT327
328 MT328
329 MT329
330 MT330
331 MT331
332 MT332
333 MT333
334 MT334
335 MT335
336 MT336
337 MT337
338 MT338
339 MT339
340 MT340
341 MT341
342 MT342
343 MT343
344 MT344
345 MT345
346 MT346
347 MT347
348 MT348
349 MT349
350 MT350
351 MT351
352 MT352
353 MT353
354 MT354
355 MT355
356 MT356
357 MT357
358 MT358
359 MT359
360 MT360
361 MT361
362 MT362
363 MT363
364 MT364
365 MT365
366 MT366
367 MT367
368 MT368
369 MT369
370 MT370
371 MT371
372 MT372
373 MT373
374 MT374
375 MT375
376 MT376
377 MT377
378 MT378
379 MT379
380 MT380
381 MT381
382 MT382
383 MT383
384 MT384
385 MT385
386 MT386
387 MT387
388 MT388
389 MT389
390 MT390
391 MT391
392 MT392
393 MT393
394 MT394
395 MT395
396 MT396
397 MT397
398 MT398
399 MT399
400 MT400
401 MT401
402 MT402
403 MT403
404 MT404
405 MT405
406 MT406
407 MT407
408 MT408
409 MT409
410 MT410
411 MT411
412 MT412
413 MT413
414 MT414
415 MT415
416 MT416
417 MT417
418 MT418
419 MT419
420 MT420
421 MT421
422 MT422
423 MT423
424 MT424
425 MT425
426 MT426
427 MT427
428 MT428
429 MT429
430 MT430
431 MT431
432 MT432
433 MT433
434 MT434
435 MT435
436 MT436
437 MT437
438 MT438
439 MT439
440 MT440
441 MT441
442 MT442
443 MT443
444 MT444
445 MT445
446 MT446
447 MT447
448 MT448
449 MT449
450 MT450
451 MT451
452 MT452
453 MT453
454 MT454
455 MT455
456 MT456
457 MT457
458 MT458
459 MT459
460 MT460
461 MT461
462 MT462
463 MT463
464 MT464
465 MT465
466 MT466
467 MT467
468 MT468
469 MT469
470 MT470
471 MT471
472 MT472
473 MT473
474 MT474
475 MT475
476 MT476
477 MT477
478 MT478
479 MT479
480 MT480
481 MT481
482 MT482
483 MT483
484 MT484
485 MT485
486 MT486
487 MT487
488 MT488
489 MT489
490 MT490
491 MT491
492 MT492
493 MT493
494 MT494
495 MT495
496 MT496
497 MT497
498 MT498
499 MT499
500 MT500
From To Data
data Entry Entry
Removal
1.00 25.61 29.10
Excavated soil
To Data Selected Earth
shoulder 37.00 383.31 435.50
Entry
485.76 551.9 E/W for formation 6.00 78.51 89.20 METAL LEADS & RATES
From
451.61 513.1 Sand for Mortar 11.00 129.56 147.20 LEAD NOTATION RATE
22.4 SSR
Sand for filling 11.00 129.56 147.20 21.789883 MLOAD 12.80 12.80
TAL LEADS & RATES SAND/ EARTH LEADS & RATES MUNLOAD 8.70 8.70
2017-18 after GST 2017-18 after GST MSTACK 8.70 8.70
From From
RATE LEAD NOTATION RATE 0.00 0.00
SSR SSR
93.60 SLOAD 47.00 0.25 110.00
14.70 SUNLOAD 14.70 0.50 MT500 110.00 110.00
SSTACK 1 MT1 120.00 120.00
2 MT2 126.00 126.00
3 MT3 132.00 132.00
0.00 0.00 0 0.00 4 MT4 138.00 138.00
28.20 28.20 1 SD1 29.10 29.10 5 MT5 144.00 144.00
39.50 39.50 2 SD2 40.70 40.70 6 MT6 150.00 150.00
54.30 54.30 3 SD3 54.30 54.30 7 MT7 156.00 156.00
66.00 66.00 4 SD4 66.00 66.00 8 MT8 162.00 162.00
77.60 77.60 5 SD5 77.60 77.60 9 MT9 168.00 168.00
89.20 11.60 6-30 6 SD6 89.20 11.60 6-30 10 MT10 174.00 174.00
100.80 9.70 >30 7 SD7 100.80 9.70 >30 11 MT11 180.00 180.00
112.40 8 SD8 112.40 12 MT12 186.00 186.00
124.00 9 SD9 124.00 13 MT13 192.00 192.00
135.60 10 SD10 135.60 14 MT14 198.00 198.00
147.20 11 SD11 147.20 15 MT15 204.00 204.00
158.80 12 SD12 158.80 16 MT16 210.00 210.00
170.40 13 SD13 170.40 17 MT17 216.00 216.00
182.00 14 SD14 182.00 18 MT18 222.00 222.00
193.60 15 SD15 193.60 19 MT19 228.00 228.00
205.20 16 SD16 205.20 20 MT20 234.00 234.00
216.80 17 SD17 216.80 21 MT21 239.75 5.7500
228.40 18 SD18 228.40 22 MT22 245.50 5.5000
240.00 19 SD19 240.00 23 MT23 251.25 5.0000
251.60 20 SD20 251.60 24 MT24 257.00 4.7500
263.20 21 SD21 263.20 25 MT25 262.75 4.5000
274.80 22 SD22 274.80 26 MT26 268.50
286.40 23 SD23 286.40 27 MT27 274.25
298.00 24 SD24 298.00 28 MT28 280.00
309.60 25 SD25 309.60 29 MT29 285.75
321.20 26 SD26 321.20 30 MT30 291.50
332.80 27 SD27 332.80 31 MT31 297.00
344.40 28 SD28 344.40 32 MT32 302.50
356.00 29 SD29 356.00 33 MT33 308.00
367.60 30 SD30 367.60 34 MT34 313.50
377.30 31 SD31 377.30 35 MT35 319.00
387.00 32 SD32 387.00 36 MT36 324.50
396.70 33 SD33 396.70 37 MT37 330.00
406.40 34 SD34 406.40 38 MT38 335.50
416.10 35 SD35 416.10 39 MT39 341.00
425.80 36 SD36 425.80 40 MT40 346.50
435.50 37 SD37 435.50 41 MT41 352.00
445.20 38 SD38 445.20 42 MT42 357.50
454.90 39 SD39 454.90 43 MT43 363.00
464.60 40 SD40 464.60 44 MT44 368.50
474.30 41 SD41 474.30 45 MT45 374.00
484.00 42 SD42 484.00 46 MT46 379.50
493.70 43 SD43 493.70 47 MT47 385.00
503.40 44 SD44 503.40 48 MT48 390.50
513.10 45 SD45 513.10 49 MT49 396.00
522.80 46 SD46 522.80 50 MT50 401.50
532.50 47 SD47 532.50 51 MT51 406.50
542.20 48 SD48 542.20 52 MT52 411.50
551.90 49 SD49 551.90 53 MT53 416.50
561.60 50 SD50 561.60 54 MT54 421.50
571.30 51 SD51 571.30 55 MT55 426.50
581.00 52 SD52 581.00 56 MT56 431.50
590.70 53 SD53 590.70 57 MT57 436.50
600.40 54 SD54 600.40 58 MT58 441.50
610.10 55 SD55 610.10 59 MT59 446.50
619.80 56 SD56 619.80 60 MT60 451.50
629.50 57 SD57 629.50 61 MT61 456.50
639.20 58 SD58 639.20 62 MT62 461.50
648.90 59 SD59 648.90 63 MT63 466.50
658.60 60 SD60 658.60 64 MT64 471.50
668.30 61 SD61 668.30 65 MT65 476.50
678.00 62 SD62 678.00 66 MT66 481.50
687.70 63 SD63 687.70 67 MT67 486.50
697.40 64 SD64 697.40 68 MT68 491.50
707.10 65 SD65 707.10 69 MT69 496.50
716.80 66 SD66 716.80 70 MT70 501.50
726.50 67 SD67 726.50 71 MT71 506.50
736.20 68 SD68 736.20 72 MT72 511.50
745.90 69 SD69 745.90 73 MT73 516.50
755.60 70 SD70 755.60 74 MT74 521.50
765.30 71 SD71 765.30 75 MT75 526.50
775.00 72 SD72 775.00 76 MT76 531.50
784.70 73 SD73 784.70 77 MT77 536.50
794.40 74 SD74 794.40 78 MT78 541.50
804.10 75 SD75 804.10 79 MT79 546.50
813.80 76 SD76 813.80 80 MT80 551.50
823.50 77 SD77 823.50 81 MT81 556.25
833.20 78 SD78 833.20 82 MT82 561.00
842.90 79 SD79 842.90 83 MT83 565.75
852.60 80 SD80 852.60 84 MT84 570.50
862.30 81 SD81 862.30 85 MT85 575.25
872.00 82 SD82 872.00 86 MT86 580.00
881.70 83 SD83 881.70 87 MT87 584.75
891.40 84 SD84 891.40 88 MT88 589.50
901.10 85 SD85 901.10 89 MT89 594.25
2008-09
From
LEAD NOTATION RATE
SSR
SLOAD 10.00 10.00
SUNLOAD 8.50 8.50
SSTACK 5.50 5.50
0 0.00
89 SD89 537.60
90 SD90 542.00
91 SD91 546.40
92 SD92 550.80
93 SD93 555.20
94 SD94 559.60
95 SD95 564.00
96 SD96 568.40
97 SD97 572.80
98 SD98 577.20
99 SD99 581.60
BS IS FS HC RL REMARKS
WING WALLS
0.25m
4.80m
Amalapuram Canal
5.20m 4.30m
10.0 M
10.000
8.000
6.000
4.000
2.000
0.000
0.000 0.020 0.040 0.060