Professional Documents
Culture Documents
Kongskilde has been developing and With the Kongskilde OK pipe system it is
manufacturing grain blowers since 1949 easy and quick to establish temporary
and is today one of the leading produc- and permanent pipelines.
ers of suction blowers worldwide.
SupraVac 2000 SupraVac 2000 with the loading equipment in transport position
The SupraVac 2000 is the ideal suction blower for today’s Technical Data SupraVac 2000
farmer and commercial users. The SupraVac 2000 offers a
PTO power, recommended min. hp/kW 170/125
flexible conveying solution with truck loading capacities up to
PTO shaft, rpm. 1000
120 tons per hour.
PTO shaft, dimensions (tractor) 1 3/8” 21 splines
The PTO driven SupraVac 2000 requires 170 hp. The hydraulic Weight, kg 1600
folding boom allows for quick positioning for loading use and Air flow rate (blower) max. m3/h 3300
conveniently locks into place for transport and storage. Conveying pipes, type (suction side) OKR
Conveying pipes, type (pressure side) OK/OKR
For storage loading duties, pipes are quickly connected to the Conveying pipes, diameter mm 200
SupraVac 2000 at the rear of the machine to blow into grain
Hydraulic connection on the tractor Double function
bins, flat storage or sealed tower silos. The SupraVac 2000 uses pressure valve
OK200 piping for maximum capacity. The SupraVac 2000 is
Hydraulic pressure required, min. 50 bar
capable of using existing OK160 Kongskilde pipe lines on storage
structures at reduced capacity.
1760
4400
5040
3820
2200 2200
121165020-maal Revision
Tractor Powered Suction Blowers
Type SUC T and SUC TR
SUC T SUC TR
Kongskildes tractor-powered suction
blowers type SUC T are mounted on
the tractor lift arm and driven by the
PTO shaft. Since no separate electrical
power source is required this type can C
B
be used in many places. The SUC T is
available in 2 sizes with conveying E
D
capacities up to 33 tons/hour.
E B
The suction blowers SUC TR are trailer D
models with loading equipment and C
powered via the PTO shaft. These
A
models are for loading trailers directly
A
from the field, on-floor-storage or silos.
SUC T 300* 500* SUC TR 500* 500** 700** 1000**
They can also be used for a varity of
A 1355 1360 A 2100 2100 2100 2460
other jobs where a flexible high-
capacity conveying system is required B 1440 1900 B 2130 2130 2550 2780
The SUC TR is available in three different C 515 360 C 1690 1690 1690 2090
sizes with conveying capacities up to D 670 570 D (min/max) 2870/3840 2870/3840 2985/4395 3010/4420
64 tons/hour. E 995 820 E (min/max) 3620/4590 3620/4590 3635/5045 3660/5070
SUC 500/700/1000 TR: If the wheel arms are inverted, the blower will be lowered by 110 mm.
*) 540 rpm **) 1000 rpm
Technical Data SUC 300 T SUC 500 T SUC 500 TR SUC 700 TR SUC 1000TR
PTO power, recommended min. hp/kW 45/34 65/48 65/48 65/48 85/62 120/90
PTO shaft, rpm. 540 540 540 1000 1000 1000
PTO shaft, dimensions (tractor) 1 3/8” 1 3/8” 1 3/8” 1 3/8” 1 3/8” 1 3/8”
6 splines 6 splines 6 splines 21 splines 21 splines 21 splines
Weight, kg 350 595 820 730 770 1050
Air flow rate (blower) max. m /h
3
1800 2000 2000 2000 2000 2000
Conveying pipes, type OK/OKR OK/OKR OK/OKR OK/OKR OK/OKR OK/OKR
Conveying pipes, diameter mm 160 160 160 160 160 160
Electrical-Powered Suction Blowers
Type SUC E
SUC 300 E
Technical Data SUC 100 E SUC 150 E SUC 200 E SUC 300 E SUC 500 E
Motor requirement (blower), hp/kW 10/7.5 15/11 20/15 30/22 50/37
Motor requirement (rotary valve), hp/kW 0.5/0.37 0.5/0.37 0.5/0.37 1.5/1.1 2.0/1.5
Min. voltage, V/hz 3x400/50 3x400/50 3x400/50 3x400/50 3x400/50
Amperage, A 16 22 30 44 73
Min. fuse A (recommended) 25 35 50 63 100
Weight incl. motors, kg 210 243 285 477 668
Air flow rate, max. m3/h 1800 1800 1800 1800 2000
Conveying pipes, type OK/OKR OK/OKR OK/OKR OK/OKR OK/OKR
Conveying pipes, diameter mm 160 160 160 160 160
Control box with automatic star-delta switch* Yes Yes Yes Yes Yes
Round suction head – for sucking grain from Suction head for cleaning purposes – this is for Short suction head – connected with an
heaps and silos via a hole in the silo wall. High sucking residual grain from the floor. The head OK160 pipe stub for suction directly from a
conveying capacities can be reached using is equipped with wheels and swivel link be- truck or on-floor-storage wall. Gives slightly
this head. tween suction head and hose for easy hand- lower conveying capacities. NB: mount a
ing. Has a slightly lower conveying capacity. shutter to prevent the grain from floating out.
121001729 KK/GB/Sugetrykblæsere/BRO/1111
1 pcs. universal suction head
1 pcs. 2 m steel flex hose
The conveying capacities for the exam- Pressure pipeline
ples shown on this page apply for wheat A number of meters of horizontal piping
4 m vertical piping
with bulk density of 750 kg/m3. 2 pcs. 90° bends
1 pcs. outlet cyclone
The examples show capacities for the Conveying distance
different piping layouts illustrated a various (meter) 10 20 30 40 50 60 80 100
conveying distances. SUC 100 6.7 5.8 5.1 4.5 3.9 3.4 2.6 2.0
SUC 150 11.2 10.1 9.1 8.2 7.4 6.7 5.6 4.6
Conveying Distance: The total length of all
SUC 200 14.3 12.9 11.6 10.7 9.7 8.9 7.6 6.5
the horizontal and vertical piping on both SUC 300 19.1 17.2 15.5 14.2 13.0 11.9 10.2 8.8
the suction and pressure side including SUC 500 30.9 28.2 25.8 23.7 22.0 20.4 17.8 15.7
SUC 700 41.0 37.6 34.6 32.0 29.8 27.8 24.5 21.8
the suction hose. SUC 1000* 59.4 55.0 50.3 46.1 43.1 40.4 33.5 31.4
SupraVac 2000
107.1 87.4 77.3 67.2 59.8 55.0 48.1 42.6
Bends and suction heads are not in- *) Spec. round suction head.