You are on page 1of 4

ASTM Volume 01.

04, January 2017


Steel--Structural, Reinforcing, Pressure Vessel, Railway

Table of Contents

Standard Number Title

1 A1-00(2010) Standard Specification for Carbon Steel Tee Rails


2 A2-02(2014) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
3 A3-01(2012) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates,
4 A6/A6M-16a
Shapes, and Sheet Piling
5 A20/A20M-15 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
6 A36/A36M-14 Standard Specification for Carbon Structural Steel
Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and
7 A49-12
Forged Carbon Steel Compromise Joint Bars
8 A65-07(2013) Standard Specification for Steel Track Spikes
9 A66-07(2013) Standard Specification for Steel Screw Spikes
10 A67-00(2016) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
11 A131/A131M-14 Standard Specification for Structural Steel for Ships
12 A183-14 Standard Specification for Carbon Steel Track Bolts and Nuts
13 A184/A184M-06(2011) Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
14 A203/A203M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
15 A204/A204M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
16 A225/A225M-12 Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
17 A242/A242M-13 Standard Specification for High-Strength Low-Alloy Structural Steel
18 A263-12 Standard Specification for Stainless Chromium Steel-Clad Plate
19 A264-12 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
20 A265-12 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
21 A283/A283M-13 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile
22 A285/A285M-12
Strength
23 A299/A299M-09(2014) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and
24 A302/A302M-12
Manganese-Molybdenum-Nickel
25 A328/A328M-13a Standard Specification for Steel Sheet Piling
Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and
26 A353/A353M-09(2014)
Tempered 9% Nickel
27 A370-16 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
28 A387/A387M-11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
29 A416/A416M-16 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
30 A421/A421M-15 Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
31 A435/A435M-90(2012) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
32 A455/A455M-12a Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate,
33 A514/A514M-14
Suitable for Welding
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-
34 A515/A515M-10(2015)
Temperature Service
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-
35 A516/A516M-10(2015)
Temperature Service
Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and
36 A517/A517M-10(2015)
Tempered
37 A529/A529M-14 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered,
38 A533/A533M-16
Manganese-Molybdenum and Manganese-Molybdenum-Nickel
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon
39 A537/A537M-13
Steel
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered,
40 A542/A542M-13
Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-
41 A543/A543M-09(2014)
Chromium-Molybdenum
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8,
42 A553/A553M-14
and 9 % Nickel

1/4
ASTM Volume 01.04, January 2017
Steel--Structural, Reinforcing, Pressure Vessel, Railway
Table of Contents

Standard Number Title

Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass
43 A562/A562M-10(2015)
or Diffused Metallic Coatings
44 A572/A572M-15 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
45 A573/A573M-13 Standard Specification for Structural Carbon Steel Plates of Improved Toughness
46 A577/A577M-90(2012) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for
47 A578/A578M-07(2012)
Special Applications
Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa]
48 A588/A588M-15
Minimum Yield Point, with Atmospheric Corrosion Resistance
Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate
49 A612/A612M-12
and Lower Temperature Service
50 A615/A615M-16 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
51 A633/A633M-13 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
Standard Specification for Pressure Vessel Plates, 5 % and 51/2 % Nickel Alloy Steels, Specially
52 A645/A645M-10(2016)
Heat Treated
53 A648-12 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with
54 A656/A656M-13
Improved Formability
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for
55 A662/A662M-12
Moderate and Lower Temperature Service
56 A673/A673M-07(2012) Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles
57 A690/A690M-13a
and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
58 A704/A704M-06(2011) Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
59 A706/A706M-16 Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
60 A709/A709M-16a Standard Specification for Structural Steel for Bridges
Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-
61 A710/A710M-02(2013)
Molybdenum-Columbium Alloy Structural Steel Plates
62 A722/A722M-15 Standard Specification for High-Strength Steel Bars for Prestressed Concrete
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched
63 A724/A724M-09(2013)
and Tempered, for Welded Pressure Vessels
Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy
64 A734/A734M-12
Steel, Quenched-and-Tempered
Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-
65 A735/A735M-12
Columbium Alloy Steel, for Moderate and Lower Temperature Service
Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-
66 A736/A736M-12
Chromium-Molybdenum-Columbium Alloy Steel
67 A737/A737M-09(2013) Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon
68 A738/A738M-12a
Steel, for Moderate and Lower Temperature Service
69 A751-14a Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
70 A759-10(2016) Standard Specification for Carbon Steel Crane Rails
71 A767/A767M-16 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel
72 A769/A769M-05(2010)
Structural Shapes
Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special
73 A770/A770M-03(2012)e1
Applications
74 A775/A775M-16 Standard Specification for Epoxy-Coated Steel Reinforcing Bars
Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed
75 A779/A779M-16
Concrete
Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy
76 A786/A786M-15
Steel Floor Plates
77 A820/A820M-16 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
78 A821/A821M-15 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
79 A827/A827M-14 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
80 A829/A829M-14 Standard Specification for Alloy Structural Steel Plates
Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical
81 A830/A830M-14
Composition Requirements
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-
82 A832/A832M-10(2015)e1
Vanadium

2/4
ASTM Volume 01.04, January 2017
Steel--Structural, Reinforcing, Pressure Vessel, Railway
Table of Contents

Standard Number Title

Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical
83 A841/A841M-13
Control Process (TMCP)
Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the
84 A844/A844M-09(2015)
Direct-Quenching Process
85 A857/A857M-07(2013) Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric
86 A871/A871M-14
Corrosion Resistance
87 A881/A881M-16 Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
88 A882/A882M-04a(2010) Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
89 A884/A884M-14 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed
90 A886/A886M-12
Concrete
Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural
91 A898/A898M-07(2012)
Shapes
Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed
92 A910/A910M-12
Concrete
93 A911/A911M-15 Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties
Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced
94 A913/A913M-15
by Quenching and Self-Tempering Process (QST)
95 A934/A934M-16 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
96 A941-15 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using
97 A944-10(2015)
Beam-End Specimens
Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and
98 A945/A945M-16
Restricted Sulfur for Improved Weldability, Formability, and Toughness
Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet
99 A950/A950M-11(2015)
Piling
100 A951/A951M-16 Standard Specification for Steel Wire for Masonry Joint Reinforcement
101 A955/A955M-16a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
102 A970/A970M-16 Standard Specification for Headed Steel Bars for Concrete Reinforcement
Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel
103 A981/A981M-11(2016)
Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
104 A992/A992M-11(2015) Standard Specification for Structural Steel Shapes
105 A996/A996M-16 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-
106 A1017/A1017M-11(2015)
Tungsten
Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for
107 A1022/A1022M-16b
Concrete Reinforcement
Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used
108 A1032-15
for Prestressed Concrete Pipe
109 A1034/A1034M-10a(2015) Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete
110 A1035/A1035M-16b
Reinforcement
111 A1043/A1043M-14 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
112 A1044/A1044M-16a Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
113 A1055/A1055M-10e1 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
114 A1058-14 Standard Test Methods for Mechanical Testing of Steel Products-Metric
Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain
115 A1060/A1060M-16b
and Deformed, for Concrete
116 A1061/A1061M-16 Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and
117 A1064/A1064M-16b
Deformed, for Concrete
Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-
118 A1066/A1066M-11(2015)e1
Mechanical Controlled Process (TMCP)
Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for
119 A1077/A1077M-14
Use in Buildings
120 A1078/A1078M-12e1 Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
121 A1081/A1081M-15 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete
122 A1094/A1094M-16
Reinforcement

3/4
ASTM Volume 01.04, January 2017
Steel--Structural, Reinforcing, Pressure Vessel, Railway
Table of Contents

Standard Number Title

Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for
123 A1096/A1096M-15
Concrete Reinforcement
Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing
124 D3963/D3963M-15
Bars

4/4

You might also like