Professional Documents
Culture Documents
Impellers made of high-tech compound material with optimised flow con- This opens up entirely new possibilities for applications in ventilation and
trol, combined with proven single- or 3-phase asynchronous motors or air-conditioning and beyond. For example, ebm-papst AC fans can now be
highly efficient GreenTech EC motors: these are the outstanding features replaced by the latest fans in GreenTech EC technology without any
of the new generation of backward-curved centrifugal fans for operation expensive modification.
without scroll housing. That's RadiCal!
Advantages at a glance:
The impellers in sizes 133 to 630mm are made of a single-piece special – High efficiency with improved impeller technology and new EC motors
compound material which allows for high rotational speed, and thus for – Perfectly matching components (controller/motor/impeller)
the high power density of the fan. The impeller styling has been optimised – Extremely quietly running with optimised air flow through the impeller
using complex simulation models adjusted to perfection by checking – Significantly reduced tonal noise
against prototypes. The result is an optimal, low-loss flow of air through – Unrivalled compactness
the impeller and so there are no longer any drastic cross-sectional chan- – Mechanical compatibility of AC and EC fans
ges, a well-known source of losses in the impeller. A uniform flow profile – EC fans with 2 speeds or continuous control
without separations also means fewer noise sources and thus better – High power density
acoustics. That's RadiCal, too! – Robust design and maintenance-free operation
– Easy initial set-up
The new motor in GreenTech EC technology with integrated control elec- – ErP* compliant (see individual designation)
tronics is designed in such as way as to make the RadiCal fans in sizes
190 up to 250mm have the same mounting dimensions as the combina- *ErP: Energy-related Products directive – defined minimum requirements
tion of the same impeller with an asynchronous motor. In addition, the for fans in accordance with the EcoDesign directive for fans with a
specified EC centrifugal fan achieves significantly higher air performance drive output of 125 W and above.
than the AC variant with identical dimensions. The small GreenTech EC
fans are available in two different control configurations: one with two
fixed speed stages and another with the familiar continuous control option
via a combined 0-10V/PWM control input. Sizes exceeding 250mm can be
controlled by a 0-10V/PWM input signal or monitored respectively control-
led via RS485 serial connection, using the MODBUS-RTU protocol.
2
Table of contents
3
Sustainability is at the centre of our
thoughts and actions. Out of conviction!
Philosophy
4
5
6
EC centrifugal fans – RadiCal
7
EC centrifugal fans – RadiCal
backward curved, Ø 133
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 133 M3G 045-AI A 1~ 200-240 50/60 3770 27 0,27 -25..+60 p. 165 / H4)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n Ped I LWA
in H2O
Pa
Curves:
Speed-controlled A 3 = ηmax. rpm W A dB(A)
400
1,6
A 1 3930 24 0,23 66
A 2 3800 26 0,26 63
360
1,4
A 3 3770 27 0,27 61
320 4 A 4 3835 26 0,25 65
1,2
280
1,0
240 3
200
0,8
160
0,6
120 2
0,4
80
0,2
40
1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
8
– Technical features: See electrical connections p. 165
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
Ø4.5 (4x)
0˚
57.3 scope of delivery
M4 (4x)
Ø93±0.2
Ø133
Ø118
Ø129
Ø89
Ø87
Ø27
Ø58±0.2
+20
450
10
85±
48.5 1
13
6
o147±0.5
o165 64
Ø5 (4x) 2 6
45°
Ø1
80
±0
Ø19 .5
5±0
.5
Mounting
dimensions:
Ø27
Ø2
Ø1 10
95
±
0.5
20
0+
45
10
6 85
±
10
11
EC centrifugal fans – RadiCal
backward curved, Ø 190
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 190 M3G 055-BD A 1~ 200-240 50/60 2710 57 0,43 -25..+60 p. 164 / H3)
*3G 190 M3G 055-CF B 1~ 200-240 50/60 4120 169 1,35 -25..+60 p. 164 / H3)
*3G 190 M3G 055-BI C 1~ 200-240 50/60 3200 83 0,75 -25..+60 p. 165 / H4)
*3G 190 M3G 055-CF D 1~ 200-240 50/60 3640 115 1,10 -25..+60 p. 163 / H5)
*3G 190 M3G 055-CF E 1~ 200-240 50/60 4120 169 1,35 -25..+60 p. 165 / H4)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n Ped I LWA
in H2O
Pa
Curves:
2 Speed stages 3 7 ηmax.
=
rpm W A dB(A)
A 1 2880 49 0,36 69
1000
4,0
A 2 2815 52 0,40 64
A 3 2710 57 0,43 62
A 4 2780 54 0,41 67
800
3,2
A 5 2435 30 0,23 65
B
4
A 6 2390 32 0,25 60
A 7 2325 35 0,27 59
600
2,4
A 8 2360 33 0,26 63
8
3
B 1 4440 160 1,35 81
B 2 4235 165 1,35 75
400
1,6
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
12
– Technical features: See electrical connections p. 163 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
n Ped I LWA
in H2O
Pa
Curves:
Speed-controlled 3 =ηmax. rpm W A dB(A)
C 1 3435 80 0,69 73
1000
4,0
C 2 3335 83 0,73 68
E C 3 3200 83 0,75 66
C 4 3300 83 0,74 70
800
3,2
4
D 4 3840 115 1,10 76
C 3 E 1 4440 160 1,35 81
4 E 2 4235 165 1,35 75
400
1,6
3
E 3 4120 169 1,35 72
3 2
E 4 4155 160 1,35 74
200
0,8
2
2
1 1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Accessory part:
Inlet nozzle 09576-2-4013
Ø4.5 (4x)
not included in the standard Depth of screw max. 5 mm
scope of delivery M4 (4x)
2
Ø80
Ø132.8±0.2
Ø125.5
Ø190
Ø158
Ø170
Ø89
Ø72
Ø27
0
0 +2
45
0
±1
85
6
o204±0.5
o225 79
Ø5 (4x) 6
45°
Ø2 Mounting
Ø265±0 44
.5 dimensions:
Ø265±0
.5
20
0+
45
6
0
±1
85
14
EC centrifugal fans – RadiCal
backward curved, Ø 190, 2 speed stages, 170 W - electronics
Accessory part:
Inlet nozzle 09576-2-4013 Depth of screw max. 5 mm
Ø4.5 (4x)
not included in the standard Depth of screw max. 10 mm
scope of delivery
M4(4x) M6(4x)
5
Ø75
Ø132.8±0.2
Ø125.5
Ø101
Ø190
Ø158
Ø170
Ø72
20
0+
45
0
±1
85
6
79 o204±0.5
o225 6
Ø5 (4x)
45°
Ø2 Mounting
Ø265±0 44
.5 dimensions:
Ø265±0
.5
20
0+
45
6
0
±1
85
15
EC centrifugal fans – RadiCal
backward curved, Ø 190, speed-controlled, 85 W - electronics
Accessory part:
Inlet nozzle 09576-2-4013
Ø4.5 (4x)
not included in the standard Depth of screw max. 5 mm
scope of delivery M4 (4x)
2
Ø80
Ø132.8±0.2
Ø125.5
Ø190
Ø158
Ø170
Ø27
Ø89
Ø72
20
0+
45
0
±1
85
6
o204±0.5
o225 79
6
Ø5 (4x)
45°
Ø2 Mounting
Ø265±0 44
.5 dimensions:
Ø265±0
.5
20
0+
45
610
85
±
16
EC centrifugal fans – RadiCal
backward curved, Ø 190, speed-controlled, 115 W - electronics
Ø4.5 (4x)
M4 (4x)
M4 (4x)
R1
0
max.Ø 95
Ø132.8
Ø125.5
Ø115
Ø190
Ø158
Ø170
45
0
+2
0
85 6
± 10
1.25
62.5 14 58 ±0.2
69±1
95 105±0.2
2
Connection line PVC 3G 0.5 mm ,
3 x brass lead tips crimped
2
2
Connection line PVC 4X 0.25 mm ,
4 x brass lead tips crimped
107.5
225 85.5 204 ±0.5
Ø5 (4x) 6
45°
Ø2
66 ± ±0
.5
0.5
44
Ø2
0.5
6± Mounting
Ø26 dimensions:
45
85
0
+2
±1
0
17
EC centrifugal fans – RadiCal
backward curved, Ø 190, speed-controlled, 170 W - electronics
Accessory part:
Inlet nozzle 09576-2-4013 Depth of screw max. 5 mm
Ø4.5 (4x)
not included in the standard Depth of screw max. 10 mm
scope of delivery
M4(4x) M6(4x)
5
Ø75
Ø132.8±0.2
Ø125.5
Ø101
Ø190
Ø158
Ø170
Ø72
20
0+
45
0
±1
85
6
79 o204±0.5
o225 6
Ø5 (4x)
45°
Ø2 Mounting
Ø265±0 44
.5 dimensions:
Ø265±0
.5
20
0+
45
6
85
10
±
18
19
EC centrifugal fans – RadiCal
backward curved, Ø 220
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 220 M3G 055-BI A 1~ 200-240 50/60 2580 85 0,70 -25..+60 p. 164 / H3)
*3G 220 M3G 055-CF B 1~ 200-240 50/60 3230 168 1,40 -25..+50 p. 164 / H3)
*3G 220 M3G 055-BI C 1~ 200-240 50/60 2580 85 0,70 -25..+60 p. 165 / H4)
*3G 220 M3G 055-CF D 1~ 200-240 50/60 2790 115 1,10 -25..+50 p. 163 / H5)
*3G 220 M3G 055-CF E 1~ 200-240 50/60 3230 168 1,40 -25..+50 p. 165 / H4)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n Ped I LWA
in H2O
Pa
Curves:
2 Speed stages 3 7 ηmax.
=
rpm W A dB(A)
A 1 2765 79 0,67 71
800 2700 85 0,69 67
3,2
A 2
A 3 2580 85 0,70 65
A 4 2630 85 0,70 66
A 5 1505 16 0,18 57
600 1485 16 0,20 54
2,4
B A 6
A 7 1470 17 0,21 51
4 A 8 1485 17 0,19 52
8
B 1 3540 168 1,40 77
400
1,6
2
B 6 2955 110 0,95 70
6
8
2 B 7 2900 120 1,00 68
7 B 8 2930 115 0,97 70
6
5 1 5 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
20
– Technical features: See electrical connections p. 163 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
n Ped I LWA
in H2O
Pa
Curves:
Speed-controlled 3 = ηmax. rpm W A dB(A)
C 1 2765 79 0,67 71
800 2700 85 0,69 67
3,2
C 2
C 3 2580 85 0,70 65
E C 4 2635 85 0,70 66
D 1 3085 115 1,10 74
600
2,4
D
D 2 2935 115 1,10 69
D 3 2790 115 1,10 66
4
D 4 2940 115 1,10 70
4
E 1 3540 168 1,40 77
400
1,6
3
E 2 3370 168 1,40 73
4
C 3
E 3 3230 168 1,40 70
E 4 3310 168 1,40 72
3
200
0,8
2
2
1 1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Accessory part:
Inlet nozzle 09609-2-4013
Ø5.5 (6x)
not included in the standard Depth of screw max. 5 mm
scope of delivery M4 (4x)
2
Ø80
Ø161±0.2
Ø220
Ø155
Ø242
Ø252
Ø89
Ø72
Ø27
20
0+
45
0
±1
85
6
o247.5±0.5
o270 92
7
Ø5 (4x)
45°
Ø2 Mounting
Ø305±0 94
.5 .5 dimensions:
Ø305±0
.5
20
0+
45
6
0
±1
85
22
EC centrifugal fans – RadiCal
backward curved, Ø 220, 2 speed stages, 170 W - electronics
Accessory part:
Inlet nozzle 09609-2-4013 Depth of screw max. 5 mm
Ø5.5 (6x)
not included in the standard Depth of screw max. 10 mm
scope of delivery
M4(4x) M6(4x)
5
Ø75
Ø161±0.2
Ø101
Ø220
Ø155
Ø242
Ø252
Ø72
20
0+
45
0
±1
85
6
92 o247.5±0.5
o270 7
Ø5 (4x)
45°
Ø2 Mounting
Ø305±0 94
.5 .5 dimensions:
Ø305±0
.5
20
0+
45
6
0
±1
85
23
EC centrifugal fans – RadiCal
backward curved, Ø 220, speed-controlled, 85 W - electronics
Accessory part:
Inlet nozzle 09609-2-4013
Ø5.5 (6x)
not included in the standard Depth of screw max. 5 mm
scope of delivery M4 (4x)
2
Ø80
Ø161±0.2
Ø220
Ø155
Ø242
Ø252
Ø27
Ø89
Ø72
20
0+
45
±10
85
6
o247.5±0.5
o270 92
7
Ø5 (4x)
45°
Ø2 Mounting
Ø305±0 94
.5 .5 dimensions:
Ø305±0
.5
20
0+
45
610
85
±
24
EC centrifugal fans – RadiCal
backward curved, Ø 220, speed-controlled, 115 W - electronics
Ø5.5 (6x)
95 ±1 not included in the standard
scope of delivery M4 (4x) Depth of screw max. 6 mm
71 ±1
M4 (4x)
R2
1.8
max.Ø95
Ø161
Ø220
Ø242
Ø252
Ø155
Ø115
45 5±1
0+ 0
20
8
6
63.7 Ø58 ±0.2
Ø105 ±0.2
0.8
21 2
Connection line PVC 3G 0.5 mm ,
3 x brass lead tips crimped
2
2
Connection line PVC 4X 0.25 mm ,
4 x brass lead tips crimped
116
270 99 247.5 ±0.5
Ø5 (4x) 7
45°
Ø3
05 ± ±0
.5
.5
0.
5
4
Ø 29
0.5
5± Mounting
Ø30 dimensions:
45
85
0
+2
±1
0
25
EC centrifugal fans – RadiCal
backward curved, Ø 220, speed-controlled, 170 W - electronics
Accessory part:
Inlet nozzle 09609-2-4013 Depth of screw max. 5 mm
Ø5.5 (6x)
not included in the standard Depth of screw max. 10 mm
scope of delivery
M4(4x) M6(4x)
5
Ø75
Ø161±0.2
Ø101
Ø220
Ø155
Ø242
Ø252
Ø72
20
0+
45
0
±1
85
6
92 o247.5±0.5
o270 7
Ø5 (4x)
45°
Ø2 Mounting
Ø305±0 94
.5 .5 dimensions:
Ø305±0
.5
20
0+
45
6
85
10
±
26
27
EC centrifugal fans – RadiCal
backward curved, Ø 225
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 225 M3G 055-CF A 1~ 200-240 50/60 2200 82 0,70 -25..+60 p. 164 / H3)
*3G 225 M3G 055-DF B 1~ 200-240 50/60 2860 170 1,40 -25..+60 p. 164 / H3)
*3G 225 M3G 055-CF C 1~ 200-240 50/60 2200 82 0,70 -25..+60 p. 165 / H4)
*3G 225 M3G 055-CF D 1~ 200-240 50/60 2440 115 1,10 -25..+40 p. 163 / H5)
*3G 225 M3G 055-DF E 1~ 200-240 50/60 2860 170 1,40 -25..+60 p. 165 / H4)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n Ped I LWA
in H2O
Pa
Curves:
2 Speed stages 3 7 = ηmax. rpm W A dB(A)
720
2,8
A 1 2290 70 0,62 69
640 A 2 2170 77 0,66 65
2200 82 0,70 60
2,4
A 3
8 3 A 8 1630 28 0,29 58
B 1 3030 150 1,25 78
320 4 B 2 2910 165 1,40 74
1,2
7
B 3 2860 170 1,40 68
240
3 B 4 2970 155 1,35 73
0,8
A 2
B 5 2550 91 0,83 74
160 8
6 B 6 2495 104 0,94 70
7 2
B 7 2490 105 0,93 65
0,4
80
6 B 8 2525 97 0,89 69
5 1 5 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
28
– Technical features: See electrical connections p. 163 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
n Ped I LWA
in H2O
Pa
Curves:
Speed-controlled 3 =ηmax. rpm W A dB(A)
720
2,8
E C 1 2290 70 0,62 69
640 C 2 2170 77 0,66 65
2200 82 0,70 60
2,4
C 3
3
D 4 2640 115 1,10 71
C
E 1 3030 150 1,25 78
320 4
1,2
160 2
2
0,4
80
1 1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Accessory part:
Inlet nozzle 96358-2-4013
Ø4.5 (4x)
not included in the standard Depth of screw max. 5 mm
scope of delivery M4 (4x)
2
Ø80
Ø153.5±0.2
Ø225
Ø146
Ø210
Ø223
Ø89
Ø72
Ø27
20
0+
45
0
±1
85
6
o247.5±0.5
o270 112
7
Ø5 (4x)
45°
Ø2 Mounting
Ø305±0 94
.5 .5 dimensions:
Ø305±0
.5
20
0+
45
6
0
±1
85
30
EC centrifugal fans – RadiCal
backward curved, Ø 225, 2 speed stages, 170 W - electronics
Accessory part:
Inlet nozzle 96358-2-4013 Depth of screw max. 5 mm
Ø4.5 (4x)
not included in the standard Depth of screw max. 10 mm
scope of delivery
M4(4x) M6(4x)
5
Ø75
Ø153.5±0.2
Ø101
Ø225
Ø146
Ø210
Ø223
Ø72
20
0+
45
0
±1
85
6
119 o247.5±0.5
o270 7
Ø5 (4x)
45°
Ø2 Mounting
Ø305±0 94
.5 .5 dimensions:
Ø305±0
.5
20
0+
45
6
0
±1
85
31
EC centrifugal fans – RadiCal
backward curved, Ø 225, speed-controlled, 85 W - electronics
Accessory part:
Inlet nozzle 96358-2-4013
Ø4.5 (4x)
not included in the standard Depth of screw max. 5 mm
scope of delivery M4 (4x)
2
Ø80
Ø153.5±0.2
Ø225
Ø146
Ø210
Ø223
Ø27
Ø89
Ø72
20
0+
45
±10
85
6
o247.5±0.5
o270 112
7
Ø5 (4x)
45°
Ø2 Mounting
Ø305±0 94
.5 .5 dimensions:
Ø305±0
.5
20
0+
45
610
85
±
32
EC centrifugal fans – RadiCal
backward curved, Ø 225, speed-controlled, 115 W - electronics
Ø4.5 (4x)
111±1 not included in the standard Depth of screw max. 6 mm
94 ±1 scope of delivery M4 (4x)
R2
5
max.Ø95
Ø153.5
Ø225
Ø146
Ø210
Ø223
Ø115
45
0+
85 ± 20
10
6
2
Connection line PVC 3G 0.5 mm ,
2 3 x brass lead tips crimped
2
Connection line PVC 4X 0.25 mm ,
4 x brass lead tips crimped
127.15
270 112 247.5 ±0.5
Ø5 (4x) 7
45°
Ø3
05 ± ±0
.5
.5
0.5
4
Ø 29
0.5
5± Mounting
Ø30 dimensions:
45
85
0
+2
±1
0
33
EC centrifugal fans – RadiCal
backward curved, Ø 225, speed-controlled, 170 W - electronics
Accessory part:
Inlet nozzle 96358-2-4013 Depth of screw max. 5 mm
Ø4.5 (4x)
not included in the standard Depth of screw max. 10 mm
scope of delivery
M4(4x) M6(4x)
5
Ø75
Ø153.5±0.2
Ø101
Ø225
Ø146
Ø210
Ø223
Ø72
20
0+
45
0
±1
85
6
119 o247.5±0.5
o270 7
Ø5 (4x)
45°
Ø2 Mounting
Ø305±0 94
.5 .5 dimensions:
Ø305±0
.5
20
0+
45
6
85
10
±
34
35
EC centrifugal fans – RadiCal
backward curved, Ø 250
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 250 M3G 055-CF A 1~ 200-240 50/60 1955 80 0,70 -25..+60 p. 164 / H3)
*3G 250 M3G 055-DF B 1~ 200-240 50/60 2510 170 1,40 -25..+60 p. 164 / H3)
*3G 250 M3G 055-CF C 1~ 200-240 50/60 1955 80 0,70 -25..+60 p. 165 / H4)
*3G 250 M3G 055-DF D 1~ 200-240 50/60 2510 170 1,40 -25..+60 p. 165 / H4)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
n Ped I LWA
in H2O
Pa
Curves:
2 Speed stages
700 3 7 = ηmax. rpm W A dB(A)
A 1 2050 70 0,60 69
600 1965 80 0,68 66
2,4
A 2
A 3 1955 80 0,70 61
A 4 1990 78 0,65 66
500
2,0
4
A 5 1325 22 0,23 60
A 6 1290 26 0,26 57
400
A 7 1290 26 0,28 53
1,6
B
8 A 8 1330 26 0,26 57
3
B 1 2680 145 1,15 76
300
1,2
2
A B 5 2330 96 0,80 72
6
8 B 6 2265 110 0,92 67
2
100
0,4
7
B 7 2250 115 0,96 64
6
B 8 2285 110 0,93 68
5 1 5 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
36
– Technical features: See electrical connections p. 164 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
n Ped I LWA
in H2O
Pa
Curves:
Speed-controlled
700 3 =ηmax. rpm W A dB(A)
C 1 2050 70 0,60 69
600 1965 80 0,68 66
2,4
C 2
D
C 3 1955 80 0,70 61
C 4 1990 78 0,65 66
500
2,0
4
D 1 2680 145 1,15 76
D 2 2565 170 1,40 71
400 2510 170 1,40 67
1,6
D 3
3
D 4 2610 160 1,30 73
300
1,2
C
4
200 3
0,8
2
100
0,4
1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Accessory part:
Inlet nozzle 96359-2-4013
Ø4.5 (4x)
not included in the standard Depth of screw max. 5 mm
scope of delivery M4 (4x)
2
Ø80
Ø172.5±0.2
Ø164.5
Ø250
Ø240
Ø255
Ø89
Ø72
Ø27
20
0+
45
±1
0
85
6
85 1.5 Ø58±0.2
99±1 31
Connection line AWG 20,
4 x brass lead tips crimped
2
o276±0.5
o300 108.5
7
Ø5 (4x)
45°
Ø3 Mounting
Ø340±0 22
.5 dimensions:
Ø340±0
.5
20
0+
45
6
0
±1
85
38
EC centrifugal fans – RadiCal
backward curved, Ø 250, 2 speed stages, 170 W - electronics
Accessory part:
Inlet nozzle 96359-2-4013 Depth of screw max. 5 mm
Ø4.5 (4x)
not included in the standard Depth of screw max. 10 mm
scope of delivery
M4(4x) M6(4x)
5
Ø75
Ø172.5±0.2
Ø164.5
Ø101
Ø250
Ø240
Ø255
Ø72
20
0+
45
0
±1
85
6
85 1.5 Ø58±0.2
99±1 31 Ø90±0.2
108.5 o276±0.5
o300 7
Ø5 (4x)
45°
Ø3 Mounting
Ø340±0 22
.5 dimensions:
Ø340±0
.5
20
0+
45
6
0
±1
85
39
EC centrifugal fans – RadiCal
backward curved, Ø 250, speed-controlled, 85 W - electronics
Accessory part:
Inlet nozzle 96359-2-4013
Ø4.5 (4x)
not included in the standard Depth of screw max. 5 mm
scope of delivery M4 (4x)
2
Ø80
Ø172.5±0.2
Ø164.5
Ø250
Ø240
Ø255
Ø27
Ø89
Ø72
20
0+
45
0
±1
85
6
85 1.5 Ø58±0.2
99±1 31
Connection line AWG 20,
3 x brass lead tips crimped
2 Control line AWG 22,
4 x brass lead tips crimped
o276±0.5
o300 108.5
7
Ø5 (4x)
45°
Ø3 Mounting
Ø340±0 22
.5 dimensions:
Ø340±0
.5
20
0+
45
610
85
±
40
EC centrifugal fans – RadiCal
backward curved, Ø 250, speed-controlled, 170 W - electronics
Accessory part:
Inlet nozzle 96359-2-4013 Depth of screw max. 5 mm
Ø4.5 (4x)
not included in the standard Depth of screw max. 10 mm
scope of delivery
M4(4x) M6(4x)
5
Ø75
Ø172.5±0.2
Ø164.5
Ø101
Ø250
Ø240
Ø255
Ø72
20
0+
45
0
±1
85
6
85 1.5 Ø58±0.2
99±1 31 Ø90±0.2
108.5 o276±0.5
o300 7
Ø5 (4x)
45°
Ø3 Mounting
Ø340±0 22
.5 dimensions:
Ø340±0
.5
20
0+
45
6
0
±1
85
41
EC centrifugal fans – RadiCal
backward curved, Ø 250
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 250 M3G 084-DF A 1~ 200-277 50/60 3740 500 2,20 -25..+60 p. 166 / P5)
*3G 250 M3G 084-DF B 1~ 200-277 50/60 4250 750 3,30 -25..+60 p. 166 / P5)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
in H2O
n Ped I LWA
Pa
Curves:
3 = ηmax. rpm W A dB(A)
1400
5,6
4
A 4 3860 500 2,20 84
A
1000
B 1 4250 585 2,60 90
4,0
3
B 2 4250 685 3,00 86
B 3 4250 750 3,30 82
800
3,2
600
2,4
400
1,6
200
0,8
1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
42
– Technical features: See electrical connections p. 166
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support bracket
centrifugal fan
module with
Mass of
4x Ø4.5
47.7
R2
8
Ø150 ±0.35
+0.3
Ø164.5
Ø172 -0.5
Ø178
Ø240
Ø255
Ø250
60
0 +20
0
85
±1
0
1.5
31
Ø164 ±0.35 8
85
106.5 ±1.8 Connection line AWG 18,
5 x crimped core-end sleeves
2
Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (4x)
2
130.5 ±2 295
178 ±3 350
400
44
EC centrifugal fans – RadiCal
backward curved, Ø 250
4x Ø4.5
64.1
R2
8
Ø169 ±0.35
+0.3
Ø164.5
Ø172 -0.5
Ø200
Ø240
Ø255
Ø250
60
0 +20
0
85
±1
0
1.5
31
Ø186 ±0.5 8
85
106.5 ±1.8 Connection line AWG 18,
5 x crimped core-end sleeves
2
Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (4x)
2
130.5 ±2 295
194.6 ±3 350
400
45
EC centrifugal fans – RadiCal
backward curved, Ø 280
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 280 M3G 074-CF A 1~ 200-240 50/60 1910 168 1,40 -25..+60 p. 165 / H4)
*3G 280 M3G 084-DF B 1~ 200-277 50/60 2700 500 2,20 -25..+60 p. 166 / P5)
*3G 280 M3G 084-DF C 1~ 200-277 50/60 2900 660 2,90 -25..+60 p. 166 / P5)
subject to alterations (1) Nominal data in operating point with maximum load and 230 VAC
in H2O
n Ped I LWA
ηmax.
Pa
3 =ηmax.
900
3,6
C B C
4 A 1 1980 150 1,05 75
800 2 1910 168 1,40 69
3,2
4 A
3 A 4
2
C 2 2900 600 2,70 81
4
C 3 2900 660 2,90 76
300
1,2
2
C 4 2900 600 2,70 79
3
200
0,8
2
100
0,4
1 11
pfs
0 200 400 600 800 1000 1200 1400 1600 1800 cfm
qV 500 1000 1500 2000 2500 3000 m3/h
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
46
– Technical features: See electrical connections p. 165 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
A On account of the installation conditions, ferritic damping in the
support bracket
centrifugal fan
module with
Mass of
4x Ø4.5
M6(4x)
5 R1
7
R 53
R33
Ø179.6
Ø176.7
Ø132.5
Ø187.5
Ø101
Ø294
Ø260
Ø280
Ø75
60
0+
20
1.25
127 46 Ø90 ±0.2
6 10
85
140 ±1 Ø125
±
8
600+20
Ø11(4x)
85
6
2
177.5 ±2.5 298
193.5 ±3 350
400
48
EC centrifugal fans – RadiCal
backward curved, Ø 280
4x Ø4.5
47.7
R1
7
R53
R33
Ø187.5 ±0.3
Ø150 ±0.35
Ø179.6
Ø176.7
Ø178
Ø260
Ø280
Ø294
60
0 +20
0
85
±1
0
1.25
46
Ø164 ±0.5 8
127
Connection line AWG 18,
142.75 ±1.8 5 x crimped core-end sleeves
8 Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (4x)
2
175.5 ±2 295
223.2 ±3 350
400
49
EC centrifugal fans – RadiCal
backward curved, Ø 280
4x Ø4.5
64.1
R1
7
R53
R33
Ø187.5 ±0.3
Ø169 ±0.35
Ø179.6
Ø176.7
Ø200
Ø260
Ø280
Ø294
60
0 +20
0
85
±1
0
1.25
46
Ø186 ±0.5 8
127
142.75 ±1.8 Connection line AWG 18,
5 x crimped core-end sleeves
8
Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (4x)
2
175.5 ±2 295
239.6 ±3 350
400
50
51
EC centrifugal fans – RadiCal
backward curved, Ø 310
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 310 M3G 074-CF A 1~ 200-240 50/60 1525 150 1,20 -25..+60 p. 165 / H4)
*3G 310 M3G 084-DF B 1~ 200-277 50/60 2360 500 2,20 -25..+60 p. 166 / P5)
*3G 310 M3G 084-FA C 1~ 200-277 50/60 2640 740 3,25 -25..+60 p. 166 / P5)
*3G 310 M3G 084-FA D 3~ 380-480 50/60 2700 790 1,25 -25..+60 p. 167 / P6)
subject to alterations (1) Nominal data in operating point with maximum load and 230 or 400 VAC
in H2O
n Ped I LWA
Pa
Curves:
3 =ηmax. rpm W A dB(A)
1000
4,0
4
A 2 1545 140 1,10 65
C
B A 3 1525 150 1,20 59
800
3,2
4 3 3 B 1
3
C 1 2700 550 2,45 84
A
400 2 2700 730 3,20 79
1,6
2 C
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
52
– Technical features: See electrical connections p. 165 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
A On account of the installation conditions, ferritic damping in the
support bracket
centrifugal fan
module with
Mass of
4x Ø4.5
163.4
M6(4x)
R2
R45.4
R71.1
4.3
Ø193.4
Ø191.4
Ø132.5
Ø325.5
Ø101
Ø204
Ø280
Ø300
Ø75
60
0
+2
0
1.5
85
6
141.5 58.5 Ø90 ±0.2
±1
0
153 ±1 Ø125
8
Connection line AWG 20, Connection line AWG 22,
3 x crimped core-end sleeves 4 x crimped core-end sleeves
Ø6.4 (8x)
2
200 ±2.5 320
216 ±3 420
440
54
EC centrifugal fans – RadiCal
backward curved, Ø 310
4x Ø4.5
47.7
R2
4
R7 1
R45
Ø150 ±0.35
Ø204 ±0.4
Ø193.4
Ø191.5
Ø280
Ø300
Ø325.5
Ø178
60 +
0 20
85 0
±10
1.5
58.5 8
Ø164 ±0.35
141.5
153 ±2 Connection line AWG 18,
8 5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø6.4 (8x)
2
200 ±2 320
247.7±3 420
440
55
EC centrifugal fans – RadiCal
backward curved, Ø 310
4x Ø4.5
64.1
R2
4
R71
R45
Ø169 ±0.35
Ø204 ±0.4
Ø193.4
Ø191.5
Ø280
Ø300
Ø325.5
Ø200
60 +
0 20
85 0
±10
1.5
58.5 8
Ø186 ±0.35
141.5
Connection line AWG 18,
168 ±2 5 x crimped core-end sleeves
8
Connection line AWG 22,
5 x crimped core-end sleeves
Ø6.4 (8x)
2
215 ±2 320
279 ±3 420
440
56
EC centrifugal fans – RadiCal
backward curved, Ø 310
4x Ø4.5
64.1
R2
4
R71
R45
Ø169 ±0.35
Ø204 ±0.4
Ø193.4
Ø191.5
Ø280
Ø300
Ø325.5
Ø200
60 +
0 20
85 0
±10
1.5
58.5 8
Ø186 ±0.35
141.5
Connection line AWG 18,
168 ±2
6 x crimped core-end sleeves
8
Connection line AWG 22,
5 x crimped core-end sleeves
Ø6.4 (8x)
2
215 ±2 320
279 ±3 420
440
57
EC centrifugal fans – RadiCal
backward curved, Ø 355
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 355 M3G 074-CF A 1~ 200-240 50/60 1250 168 1,40 -25..+60 p. 165 / H4)
*3G 355 M3G 084-DF B 1~ 200-277 50/60 1450 250 1,10 -25..+60 p. 166 / P5)
*3G 355 M3G 084-FA C 1~ 200-277 50/60 1850 500 2,20 -25..+60 p. 166 / P5)
*3G 355 M3G 084-GF D 1~ 200-277 50/60 2100 750 3,30 -25..+60 p. 166 / P5)
*3G 355 M3G 112-EA E 3~ 380-480 50/60 2400 1140 1,80 -25..+60 p. 167 / P6)
subject to alterations (1) Nominal data in operating point with maximum load and 230 or 400 VAC
in H2O
n Ped I LWA
Pa
4
D A 2 1305 165 1,35 65
A 3 1250 168 1,40 58
800
3,2
C
A 4 1280 165 1,35 60
4
3 B 1
B
B 3 1450 250 1,10 63
4 3
B 4 1525 250 1,10 68
500
2,0
3 2 C
4
C 3 1850 500 2,20 70
300
1,2
3 2
D 2 2165 750 3,30 81
2
100 D 3 2100 750 3,30 74
0,4
2
D 4 2165 740 3,25 77
1 1 1 1 1
E 1 2400 790 1,25 91
pfs
58
– Technical features: See electrical connections p. 165 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
A On account of the installation conditions, ferritic damping in the
support bracket
centrifugal fan
module with
Mass of
4x Ø4.5
M6(4x)
R2
R43.5
R69.5
2.5
Ø132.5
Ø372.5
Ø101
Ø237
Ø325
Ø350
Ø227
Ø223
Ø75
60
0
+2
0
6
85
±1
1.5
0
161.5 Ø90 ±0.2
60
171 ±1 Ø125
Ø6.4 (8x)
2
226 ±2 351
242 ±3 476
496
60
EC centrifugal fans – RadiCal
backward curved, Ø 355
M6 (4x)
4x Ø4.5
47.7
R2
2.5
R69.5
R43.5
Ø150 ±0.35
+1.5
Ø237 -0.4
Ø325
Ø350
Ø372.5
Ø227
Ø223
Ø178
60 +
0 20
85 0
±10
1.5
60 8
Ø164 ±0.35
161.75
170 ±2 Connection line AWG 18,
10 5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø6.4 (8x)
2
217±2 351.5
265 ±3 476
496
61
EC centrifugal fans – RadiCal
backward curved, Ø 355
4x Ø4.5
47.7
R2
2.5
R69.5
R43.5
Ø150 ±0.35
+1.5
Ø237 -0.4
Ø325
Ø350
Ø372.5
Ø227
Ø223
Ø178
60 +
0 20
85 0
±10
1.5
60 8
Ø164 ±0.35
161.75
Connection line AWG 18,
183 ±2 5 x crimped core-end sleeves
10
Connection line AWG 22,
5 x crimped core-end sleeves
Ø6.4 (8x)
2 351.5
229 ±2
277 ±3 476
496
62
EC centrifugal fans – RadiCal
backward curved, Ø 355
4x Ø4.5
64.1
R2
2.5
R69.5
R43.5
Ø169 ±0.35
+1.5
Ø237 -0.4
Ø350
Ø325
Ø372.5
Ø227
Ø223
Ø200
60
0 +20
0
85
±1
0
1.5 8
60
Ø186 ±0.5
161.75
191 ±2 Connection line AWG 18,
10 5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (4x)
15 372
237±2 450
301±3 500
63
EC centrifugal fans – RadiCal
backward curved, Ø 355
Accessory part: Inlet nozzle 35500-2-4013 not included in the standard scope of delivery
M6 (4x) 4x90°
4x Ø 4.5
56.5
45°
R2
R43.5
2.5
R69.5
+1.5
Ø 237 -0.4
Ø 372.5
Ø 200
Ø 325
Ø 350
Ø 227
Ø 223
Ø169
85 ±10
850 +20
8
1.5
162 60
191±2 Ø 186 ±0.5
Ø 11 (4x)
15
372
237.5 ±2.5
450
294 ±3
500
64
65
EC centrifugal fans – RadiCal
backward curved, Ø 400
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 400 M3G 084-DF A 1~ 200-277 50/60 1170 250 1,10 -25..+60 p. 166 / P5)
*3G 400 M3G 084-FA B 1~ 200-277 50/60 1500 500 2,20 -25..+50 p. 166 / P5)
*3G 400 M3G 084-GF C 1~ 200-277 50/60 1700 750 3,30 -25..+55 p. 166 / P5)
*3G 400 M3G 112-EA D 3~ 380-480 50/60 2060 1320 2,10 -25..+50 p. 167 / P6)
subject to alterations (1) Nominal data in operating point with maximum load and 230 or 400 VAC
in H2O
n Ped I LWA
Pa
Curves:
3 = ηmax. rpm W A dB(A)
1000
4,0
3 B 1
4
B 3 1500 500 2,20 68
A
B 4 1550 500 2,20 72
500
2,0
2
D 2 2110 1240 2,00 82
2 D 3 2060 1320 2,10 74
100
0,4
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
66
– Technical features: See electrical connections p. 166 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, EN 61800-5-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support bracket
centrifugal fan
module with
Mass of
4x Ø4.5
M6 (4x)
47.7
R2
2
R50
R90
Ø150 ±0.35
Ø266 ±0.5
Ø370
Ø345
Ø257
Ø420
Ø178
60
0 +20
0
85
±1
0
8
1.5
66
Ø164 ±0.35
182
194 ±2
10 Connection line AWG 18,
5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø6.4 (8x)
2 382
246.5 ±2 520
294 ±3 560
68
EC centrifugal fans – RadiCal
backward curved, Ø 400
4x Ø4.5
M6 (4x)
47.7
R2
2
R50
R90
Ø150 ±0.35
Ø266 ±0.5
Ø370
Ø345
Ø257
Ø420
Ø178
60
0 +20
0
85
±1
0
8
1.5
66
Ø164 ±0.35
182
194 ±2
10 Connection line AWG 18,
5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø6.4 (8x)
2 382
246.5 ±2 520
294 ±3 560
69
EC centrifugal fans – RadiCal
backward curved, Ø 400
Accessory part: Inlet nozzle 54476-2-4013 not included in the standard scope of delivery
Depth of screw max. 16 mm
4x Ø4.5
M6 (4x)
64.1
R2
2
R90
R50
Ø169 ±0.35
Ø266 ±0.5
Ø257
Ø370
Ø345
Ø420
Ø200
60
0 +20
0
85
±1
0
8
1.5
66
Ø186 ±0.5
182
192 ±2
10 Connection line AWG 18,
5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (4x)
15 372
244 ±2 450
308 ±3 500
70
EC centrifugal fans – RadiCal
backward curved, Ø 400
4x Ø 4.5
M6 (4x) 4x90°
56.5
R2
2
45°
R50
R 90
Ø 266 ±0.5
Ø 420
Ø 200
Ø 345
Ø 370
Ø 257
Ø169
85 ±10
850 +20
8
1.5
182 66
192 ±2 Ø 186 ±0.5
Ø 11 (4x)
15
372
246 ±2.5
450
302.5 ±3
500
71
EC centrifugal fans – RadiCal
backward curved, Ø 450
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 450 M3G 084-FA A 1~ 200-277 50/60 1000 250 1,10 -25..+60 p. 166 / P5)
*3G 450 M3G 084-GF B 1~ 200-277 50/60 1260 500 2,20 -25..+50 p. 166 / P5)
*3G 450 M3G 112-EA C 1~ 200-277 50/60 1440 750 3,30 -25..+60 p. 166 / P5)
*3G 450 M3G 112-GA D 3~ 380-480 50/60 1550 950 1,50 -25..+60 p. 167 / P6)
subject to alterations (1) Nominal data in operating point with maximum load and 230 or 400 VAC
2,4 in H2O
n Ped I LWA
Pa
Curves:
600 3 = ηmax. rpm W A dB(A)
4
4
A 1 1130 230 1,05 76
D
C A 2 1050 250 1,10 68
B
500
2,0
4 3
A B 2 1345 500 2,20 80
B 3 1260 500 2,20 69
B 4 1295 500 2,20 71
300
1,2
4
C 1 1550 570 2,55 79
2
C 2 1525 750 3,30 78
200 C 3 1440 750 3,30 72
0,8
2
3 C 4 1495 750 3,30 76
2
D 1 1550 600 1,00 79
100 1550 820 1,35 78
0,4
2 D 2
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
72
– Technical features: See electrical connections p. 166 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, EN 61800-5-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support bracket
centrifugal fan
module with
Mass of
6x Ø9
47.7
R2
0
R50
R40
Ø150 ±0.35
Ø300 ±0.5
Ø286.7
Ø450
Ø425
Ø292
Ø485
Ø178
60
0 +20
0
85
±1
0
3
50
Ø164 ±0.35
218
226 ±2
10
Connection line AWG 18,
5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (8x)
15 549
260.5 ±2 580
308 ±3 630
74
EC centrifugal fans – RadiCal
backward curved, Ø 450
6x Ø9
47.7
R2
0
R50
R40
Ø150 ±0.35
Ø300 ±0.5
Ø286.7
Ø450
Ø425
Ø292
Ø485
Ø178
60
0 +20
0
85
±1
0
3
50
Ø164 ±0.35
218
226 ±2
10 Connection line AWG 18,
5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (8x)
15 549
260.5 ±2 580
308 ±3 630
Observe the correct mounting position!
Install the support struts only as shown in the view!
75
EC centrifugal fans – RadiCal
backward curved, Ø 450
6x Ø 9
56.5
R2
0
45°
R 40
R50
Ø 300 ±0.5
Ø 286.7
Ø 425
Ø 450
Ø 200
Ø 485
Ø292
Ø169
85 ±10
850 +20
8
218 3
50 Ø 186 ±0.5
233.5 ±2
10
Connection line PVC AWG 18, Connection line PVC AWG 22,
5 x crimped core-end sleeves 5 x crimped core-end sleeves
15
268 ±2.5 549
580
324.5 ±3
630
76
EC centrifugal fans – RadiCal
backward curved, Ø 450
6x Ø 9
56.5
R2
0
45°
R 40
R50
Ø 300 ±0.5
Ø 286.7
Ø 425
Ø 450
Ø 200
Ø 485
Ø292
Ø169
85 ±10
850 +20
8
218 3
50 Ø 186 ±0.5
233.5 ±2
10
Connection line PVC AWG 18,
Connection line PVC AWG 22,
6 x crimped core-end sleeves
5 x crimped core-end sleeves
15
268 ±2.5 549
580
324.5 ±3
630
77
EC centrifugal fans – RadiCal
backward curved, Ø 500
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 500 M3G 084-FA A 1~ 200-277 50/60 750 250 1,10 -25..+60 p. 166 / P5)
*3G 500 M3G 084-GF B 1~ 200-277 50/60 900 460 2,00 -25..+40 p. 166 / P5)
*3G 500 M3G 112-GA C 1~ 200-277 50/60 1100 750 3,30 -25..+60 p. 166 / P5)
*3G 500 M3G 112-IA D 3~ 380-480 50/60 1350 1320 2,10 -25..+50 p. 167 / P6)
*3G 500 M3G 150-FF E 3~ 380-480 50/60 1700 2600 4,00 -25..+60 p. 169 / M5)
subject to alterations (1) Nominal data in operating point with maximum load and 230 or 400 VAC
4,4 in H2O
n Ped I LWA
Pa
Curves:
1100
3 = ηmax. rpm W A dB(A)
E
A 1 825 230 1,00 68
1000
4,0
4
A 2 765 250 1,10 62
900 750 250 1,10 56
3,6
D A 3
3
B 1 900 300 1,30 70
700 2 900 410 1,80 66
2,8
4 B
C
B 3 900 460 2,00 62
600
2,4
3 C 1
A 2
B C 3 1100 750 3,30 67
C 4 1150 750 3,30 69
300
1,2
3
4
2 D 1 1495 1215 1,90 82
4 3
200
0,8
2
D 4 1420 1320 2,10 76
1 1 1 1 1
E 1 1695 1790 2,80 86
pfs
78
– Technical features: See electrical connections p. 166 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: A B C D Variable
– Terminal box design: E Electrical connection via terminal strip
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: A B C D EN 60335-1, EN 61800-5-1, CE; E EN 61800-5-1, CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support bracket
centrifugal fan
module with
Mass of
Accessory part: Inlet nozzle 50901-2-2943 not included in the standard scope of delivery
Depth of screw max. 16 mm
M6 (4x)
6x Ø9
47.7
R2
8
R87
R49
1.0
Ø334.3+-0.5
Ø150 ±0.35
Ø319.5
Ø470
Ø445
Ø178
Ø525
60 +2
0
0 0
85
3.5 ±1
0
75
8
Ø164 ±0.35
227
256.5 ±3 Connection line AWG 18,
12 5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (8x)
15 549
311.5 ±2 580
359 ±3 630
80
EC centrifugal fans – RadiCal
backward curved, Ø 500
Accessory part: Inlet nozzle 50901-2-2943 not included in the standard scope of delivery
Depth of screw max. 16 mm
M6 (4x)
6x Ø9
47.7
R2
8
R87
R49
1.0
Ø334.5+-0.5
Ø150 ±0.35
Ø319.5
Ø470
Ø445
Ø178
Ø525
60 +2
0
0 0
85
3.5 ±1
0
75
8
Ø164 ±0.35
227
256.5 ±3 Connection line AWG 18,
12 5 x crimped core-end sleeves
Connection line AWG 22,
5 x crimped core-end sleeves
Ø11 (8x)
15 549
311.5 ±2 580
359 ±3 630
81
EC centrifugal fans – RadiCal
backward curved, Ø 500
M6 (4x)
4x9
6x Ø9
0°
56.5
R2
8
45°
R 49
R87
Ø 334.3 ±0.5
Ø 324.5
Ø 319.5
Ø 200
Ø 525
Ø 445
Ø 470
Ø169
85 ±10
850 +20
8
3.5
75 Ø 186 ±0.5
227
247.5 ±2
10 Connection line PVC AWG 18,
5 x crimped core-end sleeves Connection line PVC AWG 22,
5 x crimped core-end sleeves
15
304.5±2.5 549
361 ±3 580
630
82
EC centrifugal fans – RadiCal
backward curved, Ø 500
M6 (4x)
4x9
6x Ø9
0°
56.5
R2
8
45°
R 49
R87
Ø 334.5 -0.5
+1
Ø 324.5
Ø 319.5
Ø 200
Ø 525
Ø 445
Ø 470
Ø169
85 ±10
850 +20
8
3.5
75 Ø 186 ±0.5
227
247.5 ±2
10 Connection line PVC AWG 18,
6 x crimped core-end sleeves Connection line PVC AWG 22,
5 x crimped core-end sleeves
15
304.5±2.5 549
361 ±3 580
630
83
EC centrifugal fans – RadiCal
backward curved, Ø 500
M10 (6x)
6x Ø9
70
6x6
R2
R 49
0°
8
R 87
Ø334.5-0.5
+1
Ø232 -2
Ø319.5
Ø445
Ø470
Ø525
3.5 Tightening
75 torque
227
3.5±0.5 Nm
258±2 Ø252±0.3
Ø275
Cable gland M20x1,5 (3x):
12 Cable diameter
min. 4 mm, max. 10 mm,
Tightening torque 4±0.6 Nm
Ø11 (8x)
314 ±2 15
551
384 ±3
580
630
Observe the correct mounting position!
Install the support struts only as shown in the view!
84
85
EC centrifugal fans – RadiCal
backward curved, Ø 560
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 560 M3G 150-FF A 1~ 200-277 50/60 1340 1590 7,00 -25..+55 p. 168 / M4)
*3G 560 M3G 150-FF B 3~ 380-480 50/60 1540 2360 3,65 -25..+60 p. 169 / M5)
*3G 560 M3G 150-IF C 3~ 380-480 50/60 1650 2900 4,40 -25..+55 p. 169 / M5)
subject to alterations (1) Nominal data in operating point with maximum load and 230 or 400 VAC
in H2O
n Ped I LWA
Pa
Curves:
3 = ηmax. rpm W A dB(A)
900
3,6
B 4
C
A 1 1340 1120 4,90 83
800 A 2 1340 1460 6,40 78
3,2
A 4
4
B 2 1540 2300 3,60 81
B 3 1540 2360 3,65 78
500
2,0
2 2
C 2 1650 2630 4,10 81
C 3 1650 2900 4,40 77
300
1,2
100
0,4
1 11
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
86
– Technical features: See electrical connections p. 168 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Terminal box design: Electrical connection via terminal strip
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 61800-5-1; CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support bracket
centrifugal fan
module with
Mass of
M10 (6x)
Ø9 (6x)
70
6x6
R5
0
0°
Ø418 ±0.7
Ø232 -2
Ø407
Ø540
Ø565
Ø570
Tightening
torque
3.5±0.5 Nm
1.5
253
83.5
289 ±2 Ø252±0.3
Ø275
Ø11 (8x)
346 ±2 15
416 ±3 551
750
800
88
EC centrifugal fans – RadiCal
backward curved, Ø 560
M10 (6x)
Ø9 (6x)
70
6x6
R5
0
0°
Ø418 ±0.7
Ø232 -2
Ø407
Ø540
Ø565
Ø570
Tightening
torque
3.5±0.5 Nm
1.5
253
83.5
289 ±2 Ø252±0.3
Ø275
Ø11 (8x)
346 ±2 15
416 ±3 551
750
800
89
EC centrifugal fans – RadiCal
backward curved, Ø 560
M10 (6x)
Ø9 (6x)
70
6x6
R5
0
0°
Ø418 ±0.7
Ø232 -2
Ø407
Ø540
Ø565
Ø570
Tightening
torque
3.5±0.5 Nm
1.5
253
83.5
289 ±2 Ø252±0.3
Ø275
Ø11 (8x)
346 ±2 15
416 ±3 551
750
800
90
91
EC centrifugal fans – RadiCal
backward curved, Ø 630
Technical features
Perm. amb. temp.
current draw(1)
input power(1)
voltage range
and electrical
Speed/rpm(1)
connection
Frequency
Nominal
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A °C
*3G 630 M3G 112-IA A 1~ 200-277 50/60 740 500 2,20 -25..+40 p. 166 / P5)
*3G 630 M3G 112-IA B 1~ 200-277 50/60 840 750 3,30 -25..+40 p. 166 / P5)
*3G 630 M3G 112-IA C 3~ 380-480 50/60 900 950 1,50 -25..+40 p. 167 / P6)
*3G 630 M3G 150-FF D 1~ 200-277 50/60 1030 1415 6,20 -25..+50 p. 168 / M4)
*3G 630 M3G 150-FF E 3~ 380-480 50/60 1130 1790 2,80 -25..+60 p. 169 / M5)
*3G 630 M3G 150-IF F 3~ 380-480 50/60 1300 2700 4,15 -25..+55 p. 169 / M5)
subject to alterations (1) Nominal data in operating point with maximum load and 230 or 400 VAC
in H2O
n Ped I LWA
Pa
3
B 1 930 690 3,00 80
A B 2 880 750 3,30 73
4 3 B 3 840 750 3,30 70
B 4 865 750 3,30 71
200
0,8
3
C 1 900 600 1,00 78
C 2 900 830 1,30 73
2 C 3 900 950 1,50 69
2 C 4 900 885 1,40 71
100
0,4
1 1 1
0 1000 2000 3000 4000 5000 6000
pfs
cfm
qV 2000 4000 6000 8000 10000 m3/h
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
92
– Technical features: See electrical connections p. 166 ff.
– EMC: Interference emission acc. to EN 61000-6-3
Interference immunity acc. to EN 61000-6-2
Harmonics acc. to EN 61000-3-2/3
– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Terminal box design: Electrical connection via terminal strip
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 61800-5-1; CE
– Approvals: VDE, UL, CSA, CCC, GOST are applied for
Mass of centrifugal
support bracket
centrifugal fan
module with
Mass of
n Ped I LWA
Pa
Curves:
3 =ηmax. rpm W A dB(A)
4
F
700
2,8
3 D 3
4
D 4 1030 1230 5,40 77
D
500
E 1 1130 1180 1,95 84
2,0
4
E 2 1130 1640 2,60 77
3
E 3 1130 1790 2,80 74
400
1,6
3
E 4 1130 1750 2,80 75
F 1 1300 1780 2,80 87
300
1,2
100
0,4
1 1 1
pfs
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 cfm
qV 2000 4000 6000 8000 10000 12000 14000 16000 m3/h
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Ø10.5(10x)
Ø 5.2(6x)
M6 (4x)
4x9
47.7 0°
R3
45°
R63.2
R129
2.5
Ø 472 -0.7
+2
Ø 660
Ø 457
Ø 452
Ø 600
Ø 634
Ø 200
Ø150
850 +20
85 ±10
8
2
86.5
290 Ø 186 ±0.5
304 ±2 Connection line PVC AWG 18,
18 5 x crimped core-end sleeves Connection line PVC AWG 22,
5 x crimped core-end sleeves
Ø 11(8x)
15
367.5 ±2.5 549
415 ±3 750
800
94
EC centrifugal fans – RadiCal
backward curved, Ø 630
Ø10.5(10x)
Ø 5.2(6x)
M6 (4x)
4x9
56.5 0°
R3
45°
R63.2
R129
2.5
Ø 472 -0.7
+2
Ø 660
Ø 457
Ø 452
Ø 600
Ø 634
Ø 200
Ø169
850 +20
85 ±10
8
2
86.5
290 Ø 186 ±0.5
304 ±2 Connection line PVC AWG 18,
18 5 x crimped core-end sleeves Connection line PVC AWG 22,
5 x crimped core-end sleeves
Ø 11(8x)
15
367.5 ±2.5 549
424 ±3 750
800
95
EC centrifugal fans – RadiCal
backward curved, Ø 630
Ø10.5(10x)
Ø 5.2(6x)
M6 (4x)
4x9
56.5 0°
R3
45°
R63.2
R129
2.5
Ø 472 -0.7
+2
Ø 660
Ø 457
Ø 452
Ø 600
Ø 634
Ø 200
Ø169
850 +20
85 ±10
8
2
86.5
290 Ø 186 ±0.5
304 ±2 Connection line PVC AWG 18,
18 6 x crimped core-end sleeves Connection line PVC AWG 22,
5 x crimped core-end sleeves
Ø 11(4x)
15
367.5 ±2.5 549
424 ±3 750
800
96
EC centrifugal fans – RadiCal
backward curved, Ø 630
Accessory part: Inlet nozzle 63300-2-4013 not included in the standard scope of delivery
Depth of screw max. 25 mm
Ø10.5 (6x)
M10 (6x)
70
6x6
R32
R63
R129
0°
.5
-0.7
Ø472 +2
Ø232 -2
Ø660
Ø452
Ø600
Ø634
Ø458
Tightening
torque
3.5±0.5 Nm
2
290
86.5 Ø252±0.3
333 ±2
Ø275
Cable gland M20x1,5 (3x):
18 Cable diameter
min. 4 mm, max. 10 mm,
Tightening torque 4±0.6 Nm
Ø 660
Ø11(8x)
555
393 ±2 15
750
463 ±3
800
97
EC centrifugal fans – RadiCal
backward curved, Ø 630
Accessory part: Inlet nozzle 63300-2-4013 not included in the standard scope of delivery
Depth of screw max. 25 mm
Ø10.5 (6x)
M10 (6x)
70
6x6
R32
R63
R129
0°
.5
-0.7
Ø472 +2
Ø232 -2
Ø660
Ø452
Ø600
Ø634
Ø458
Tightening
torque
3.5±0.5 Nm
2
290
86.5 Ø252±0.3
333 ±2
Ø275
Cable gland M20x1,5 (3x):
18 Cable diameter
min. 4 mm, max. 10 mm,
Tightening torque 4±0.6 Nm
Ø 660
Ø11(8x)
555
393 ±2 15
750
463 ±3
800
98
EC centrifugal fans – RadiCal
backward curved, Ø 630
Accessory part: Inlet nozzle 63300-2-4013 not included in the standard scope of delivery
Depth of screw max. 25 mm
Ø10.5 (6x)
M10 (6x)
70
6x6
R32
R63
R129
0°
.5
-0.7
Ø472 +2
Ø232 -2
Ø660
Ø452
Ø600
Ø634
Ø458
Tightening
torque
3.5±0.5 Nm
2
290
86.5 Ø252±0.3
333 ±2
Ø275
Cable gland M20x1,5 (3x):
18 Cable diameter
min. 4 mm, max. 10 mm,
Tightening torque 4±0.6 Nm
Ø 660
Ø11(8x)
555
393 ±2 15
750
463 ±3
800
99
100
AC centrifugal fans – RadiCal
101
AC centrifugal fans – RadiCal
backward curved, Ø 133
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170
n Ped I LWA
in H2O
Pa
Curves:
280 3 = ηmax. rpm W A dB(A)
B
A 1 2750 25 0,11 58
1,0
B 1 3200 25 0,13 62
B 2 3170 26 0,13 59
160 A 4 3 B 3 3100 27 0,14 57
0,6
B 4 3185 26 0,13 60
120 3
0,4
80 2
2
0,2
40
1 1
pfs
50 Hz 60 Hz
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
102
– Motor protection: TOP wired internally
– Touch current: < 0,75 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
Drawings Inlet nozzle Guard grille Capacitor Connection leads Electr. connection 103
p. 104 p. 158 p. 160 p. 161 p. 162 p. 170
AC centrifugal fans – RadiCal
backward curved, Ø 133
Ø4.5(4x)
48.5 4x90˚
M4(4x)
2
56.5±1
Ø93±0.2
Ø17
Ø118
Ø133
Ø129
Ø87
20
0+
45
0 1
6 ±1
85 13 Ø47±0.2
o165 64
Ø5 (4x) 6 o147±0.5
45°
Ø19 Ø1 Mounting
5±0 80
.5 ±0 dimensions:
.5
Ø21
Ø19 0
5±0
.5
6
20
0+
0
45
±1
85
104
105
AC centrifugal fans – RadiCal
backward curved, Ø 190
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170
n Ped I LWA
in H2O
ηmax.
Pa
440
B
A 1 2480 48 0,22 66
400 2440 49 0,22 63
1,6
A 2
A 3 2350 52 0,23 60
360
2435 50 0,22 62
1,4
A 4
B 2 2645 62 0,27 66
280 A 4
B 3 2500 65 0,29 62
1,0
200 3
0,8
3
160
0,6
120 2
0,4
80
0,2
40
1 1
pfs
50 Hz 60 Hz
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
106
– Motor protection: TOP wired internally
– Touch current: < 0,75 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable (R2E)
– Connection leads: Plug system (K2E)
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: R2E: CCC, GOST
K2E: CCC
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
Drawings Inlet nozzle Guard grille Capacitor Connection leads Electr. connection 107
p. 108 p. 158 p. 160 p. 161 p. 162 p. 170
AC centrifugal fans – RadiCal
backward curved, Ø 190
4x90°
45°
Ø4.5 (4x)
Depth of screw max. 5 mm
M4 (4x)
2
Ø80
Ø132.8
Ø125.5
Ø158
Ø190
Ø170
Ø27
450+20
Ø58±0.2
85±10
6
62.5
68.5±1 1.25 Accessory part:
Connection line, 14 Inlet nozzle 09576-2-4013
4 x brass lead tips crimped not included in the standard
2
scope of delivery
o225 79 o204±0.5
Ø5 (4x) 6
45°
Mounting
Ø2 6 6
±0.5 dimensions:
Ø266±
0.5
Ø2
44
±0
.5
PE
L
N + Capacitor Coded plug system AMP Universal-Mate-N-Lok
Capacitor Connector housing: AMP 350 780-1
4 x plug pin: AMP 926 885-1
Mating connector (not included in the standard scope of delivery)
Connector housing: AMP 350 779-4
4 x female connector: AMP 926 884-1
108
109
AC centrifugal fans – RadiCal
backward curved, Ø 220
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170
n Ped I LWA
in H2O
ηmax.
Pa
440
A 1 2350 80 0,36 68
400 2240 86 0,38 62
1,6
A 2
A 3 2100 88 0,39 60
360
2185 86 0,38 63
1,4
A 4
200
0,8
3
3
160
0,6
120
0,4
80
0,2
40
1 1
pfs
50 Hz 60 Hz
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
110
– Motor protection: TOP wired internally
– Touch current: < 0,75 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable (R2E)
– Connection leads: Plug system (K2E)
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: R2E 220-RA: VDE, CCC, GOST
R2E 220-RB: CCC, GOST
K2E: CCC
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
n Ped I LWA
in H2O
ηmax.
Pa
D A 1 2600 90 0,40 70
A 2 2575 95 0,43 66
500
2,0
400
B 1 2900 120 0,53 73
1,6
4
B 2 2790 130 0,56 68
C
4 B 3 2650 135 0,60 66
B 4 2795 125 0,55 69
300
1,2
200
0,8
2
2
100
0,4
1 1
pfs
50 Hz 60 Hz
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Drawings Inlet nozzle Guard grille Capacitor Connection leads Electr. connection 111
p. 112 p. 158 p. 160 p. 161 p. 162 p. 170
AC centrifugal fans – RadiCal
backward curved, Ø 220
4x90°
45°
Ø5.5 (6x)
Depth of screw max. 5 mm
M4 (4x)
2
Ø80
Ø242
Ø161
Ø220
Ø155
Ø252
Ø27
450+20
Ø58±0.2
85±10
6
63.7
71±1 0.8 Accessory part:
Connection line, 21 Inlet nozzle 09609-2-4013
4 x brass lead tips crimped not included in the standard
2
scope of delivery
o270 92 o247.5±0.5
Ø5 (4x) 7
45°
Mounting
Ø3 0 5
±0.5 dimensions:
Ø305±
0.5
Ø2
94
.5±
0.5
PE
L
N + Capacitor Coded plug system AMP Universal-Mate-N-Lok
Capacitor Connector housing: AMP 350 780-1
4 x plug pin: AMP 926 885-1
Mating connector (not included in the standard scope of delivery)
Connector housing: AMP 350 779-4
4 x female connector: AMP 926 884-1
112
113
AC centrifugal fans – RadiCal
backward curved, Ø 225
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170
n Ped I LWA
in H2O
Pa
Curves:
3 ηmax.
= rpm W A dB(A)
720
2,8
A 3
480 A
4
B 2 2735 205 0,89 73
B 3 2600 210 0,92 68
400
1,6
4
B 4 2750 200 0,88 71
3
320
1,2
240
0,8
2
160 2
0,4
80
1 1
pfs
50 Hz 60 Hz
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
114
– Motor protection: TOP wired internally
– Touch current: < 0,75 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable (R2E)
– Connection leads: Plug system (K2E)
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: CCC
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
Drawings Inlet nozzle Guard grille Capacitor Connection leads Electr. connection 115
p. 116 p. 158 p. 160 p. 161 p. 162 p. 170
AC centrifugal fans – RadiCal
backward curved, Ø 225
4x90°
45°
Ø4.5 (4x)
Depth of screw max. 5 mm
M4 (4x)
2
Ø80
Ø153.5
Ø210
Ø225
Ø146
Ø223
Ø27
450+20
Ø58±0.2
85±10
6
88.4
99±1 1.5 Accessory part:
Connection line, 28 Inlet nozzle 96358-2-4013
4 x brass lead tips crimped not included in the standard
2
scope of delivery
45°
Mounting
Ø3 0 5
±0.5 dimensions:
Ø305±
0.5
Ø2
94
.5±
0.5
PE
L
N + Capacitor Coded plug system AMP Universal-Mate-N-Lok
Capacitor Connector housing: AMP 350 780-1
4 x plug pin: AMP 926 885-1
Mating connector (not included in the standard scope of delivery)
Connector housing: AMP 350 779-4
4 x female connector: AMP 926 884-1
116
117
AC centrifugal fans – RadiCal
backward curved, Ø 250
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170
n Ped I LWA
in H2O
Pa
Curves:
3 ηmax.
= rpm W A dB(A)
900
3,6
A 2
A 4
4
B 4 2650 260 1,15 74
400
1,6
3
3
300
1,2
200
0,8
100
0,4
1 1
pfs
0 100 200 300 400 500 600 700 800 900 cfm
qV 200 400 600 800 1000 1200 1400 1600 m3/h
50 Hz 60 Hz
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
118
– Motor protection: TOP wired internally
– Touch current: < 0,75 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable (R2E)
– Connection leads: Plug system (K2E)
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: R2E: CCC
Mass of centrifugal
support basket
centrifugal fan
module with
Mass of
Drawings Inlet nozzle Guard grille Capacitor Connection leads Electr. connection 119
p. 120 p. 158 p. 160 p. 161 p. 162 p. 170
AC centrifugal fans – RadiCal
backward curved, Ø 250
4x90°
45°
Ø4.5 (4x)
Depth of screw max. 5 mm
M4 (4x)
2
Ø80
Ø172.5
Ø164.5
Ø240
Ø250
Ø255
Ø27
450+20
Ø58±0.2
85±10
6
85
99±1 1.5 Accessory part:
Connection line, 31 Inlet nozzle 96359-2-4013
4 x brass lead tips crimped not included in the standard
2
scope of delivery
45°
Mounting
Ø3 4 0
±0.5 dimensions:
Ø340±
0.5
Ø3
22
±0
.5
PE
L
N + Capacitor Coded plug system AMP Universal-Mate-N-Lok
Capacitor Connector housing: AMP 350 780-1
4 x plug pin: AMP 926 885-1
Mating connector (not included in the standard scope of delivery)
Connector housing: AMP 350 779-4
4 x female connector: AMP 926 884-1
120
121
AC centrifugal fans – RadiCal
backward curved, Ø 250
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170
n Ped I LWA
in H2O
Pa
Curves:
3 = ηmax. rpm W A dB(A)
900
3,6
A 2
A 4
4
3
B 4 3140 370 1,60 79
400
1,6
300
1,2
200
0,8
100
0,4
1 1
pfs
0 100 200 300 400 500 600 700 800 900 cfm
qV 200 400 600 800 1000 1200 1400 1600 m3/h
50 Hz 60 Hz
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
122
– Motor protection: TOP wired internally
– Touch current: < 0,75 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, CURUS on request
centrifugal fan
Mass of
Centrifugal fan kg
Ø4.5(4x)
117.8
M6(4x)
R 28
5 Ø172.5 ±0.3
Ø164.5
Ø101
Ø250
Ø240
Ø255
Ø75
6
85 1.5 Ø90 ±0.2
85 +20
45
±1
108 ±1
0
31
0
Accessory part:
Inlet nozzle 96359-2-4013 Connection line,
2 not included in the standard 4 x brass lead tips crimped
scope of delivery
124
125
AC centrifugal fans – RadiCal
backward curved, Ø 280
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170 / 171
n Ped I LWA
in H2O
ηmax.
Pa
C
A 1 1380 73 0,32 66
A 2 1340 85 0,37 61
700
2,8
A 3 1320 90 0,40 55
4
A 4 1340 84 0,37 57
600
2,4
3
C 3 2500 570 0,91 73
C 4 2540 530 0,84 74
400
1,6
300
1,2
A 2
200
0,8
4
3
100
0,4
1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
126
– Motor protection: A B TOP wired internally; C Connection for external TOP
– Touch current: < 0,75 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: A B Axial; C Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: R4E: CCC
R2D: VDE, CURUS on request
centrifugal fan
Mass of
Centrifugal fan kg
(2)
R4E 280-RA28 -05 2,50
(3)
R2D 280-RB06 -01 5,40
(2) ErP 2015 (3) ErP 2013
n Ped I LWA
in H2O
ηmax.
Pa
220 4
B 4 1470 115 0,50 60
200
0,8
180
0,7
160 3
0,6
140
0,5
120
100
0,4
80 2
0,3
60
0,2
40
0,1
20
1
pfs
0 100 200 300 400 500 600 700 800 900 1000 cfm
qV 200 400 600 800 1000 1200 1400 1600 1800 m3/h
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Ø4.5(4x)
not included in the standard Depth of screw max. 5 mm
scope of delivery
M4(4x)
R1
7
R53
2
Ø187.5
Ø294
Ø180
Ø260
Ø280
Ø80
Ø27
1.25
6
45
85
127 46 Ø58±0.2
+2
0
±10
0
132 ±1
M6(4x)
R1
7
R53
5
R33
Ø187.5 ±0.3
Ø176.7
Ø179.6
Ø260
Ø280
Ø101
Ø294
Ø75
45
+2
0
0
6
1.25
85
±1
46
0
127 Ø90±0.2
165±1
128
129
AC centrifugal fans – RadiCal
backward curved, Ø 310
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170 / 171
n Ped I LWA
1,1 in H2O
Pa
Curves:
(50 Hz)
280 E 3 ηmax.
= rpm W A dB(A)
4
240 C A 2 910 52 0,24 53
4
890 55 0,25 46
0,9
A 3
220
A 4 910 52 0,24 47
200
0,8
3
C 1 1390 110 0,50 66
180 3
C 1345 130 0,58 61
0,7
140
C 4 1355 125 0,57 58
A
E 1 1425 110 0,32 67
0,5
120
E 2 1395 130 0,33 62
4
100
0,4
2
2 E 3 1380 145 0,35 56
80 3 E 4 1395 130 0,33 59
0,3
60
0,2
40 2
0,1
20
1 1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
130
– Motor protection: A B C D TOP wired internally; E F Connection for external TOP
– Touch current: < 0,75 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Axial
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, CURUS on request
centrifugal fan
Mass of
Centrifugal fan kg
n Ped I LWA
in H2O
Pa
B 2 1035 65 0,29 56
320 4
B 3 1000 69 0,31 49
1,2
D
B 4 1040 65 0,28 52
280
4 D 1 1580 150 0,64 69
3
1,0
240
D 2 1455 175 0,77 63
D 3 1380 185 0,82 61
200 D 4 1470 170 0,75 62
0,8
3
B F 1 1635 150 0,30 70
160 F 2 1580 185 0,34 65
0,6
4
2 F 3 1550 205 0,37 61
120
2 F 4 1585 180 0,34 66
3
0,4
80
2
0,2
40
1 1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Ø4.5(4x)
not included in the standard
scope of delivery M4(4x)
R2
4.3
2
R45.4
R71.1
Ø325.5
Ø191.5
Ø204
Ø193
Ø280
Ø300
Ø80
Ø27
45
0
+2
0
1.5
6 10
85
±
141.5 58.5 Ø58±0.2
154 ±1
8
Connection line PVC 4G 0,5 mm2,
4 x brass lead tips crimped
2
R45.4
R71.1
Ø325.5
Ø191.5
Ø204
Ø193
Ø280
Ø300
Ø80
Ø27
45
0
+2
0
1.5
6 10
85
±
132
AC centrifugal fans – RadiCal
backward curved, Ø 310
Ø4.5(4x)
not included in the standard
scope of delivery M4(4x)
R2
4.3
2
R45.4
R71.1
Ø325.5
Ø191.5
Ø204
Ø193
Ø280
Ø300
Ø80
Ø27
45
0
+2
0
1.5
6 10
85
±
141.5 58.5 Ø58±0.2
154 ±1
8
Connection line PVC 6G 0,5 mm2,
6 x brass lead tips crimped
133
AC centrifugal fans – RadiCal
backward curved, Ø 355
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170 / 171
n Ped I LWA
in H2O
Pa
Curves:
(50 Hz) 3 ηmax.
= rpm W A dB(A)
360 D
1,4
A 1 905 70 0,32 60
320 A 2 870 80 0,35 55
830 85 0,37 48
1,2
C 4 A 3
4
280 A 4 845 85 0,36 48
C 1 1405 200 0,89 72
1,0
80 3
0,2
40 2
1 1 1
pfs
0 200 400 600 800 1000 1200 1400 1600 1800 cfm
qV 500 1000 1500 2000 2500 3000 m3/h
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
134
– Motor protection: A B C TOP wired internally; D E Connection for external TOP
– Touch current: < 0,75 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: VDE, CURUS on request
centrifugal fan
Mass of
Centrifugal fan kg
n Ped I LWA
2,0 in H2O
Pa
280 3
E 3 1550 400 0,78 66
E 4 1555 390 0,76 65
1,0
240
200
0,8
160 B
0,6
120
0,4
4
80
3
0,2
40 2
1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Ø4.5(4x)
not included in the standard Depth of screw max. 10 mm
scope of delivery
M6(4x)
R2
2.5
R43.5
R69.5
5
+1.5
Ø237 -0.4
Ø372.5
Ø223.3
Ø227.1
Ø101
Ø325
Ø350
Ø75
1.5
60
6
85
Ø90 ±0.2
45
±1
162
0
+2
0
0
190 ±1.5
scope of delivery
M6(4x)
5
R2
2.5
R69.5
R43.5
Ø372.5
Ø227.1
Ø223.3
Ø101
Ø237
Ø325
Ø350
Ø75
45
0+2
0
6
1.5
85
±1
0
161.5 60 90 ±0.2
190 ±1.5
Connection line silicone 4G 0,5 mm2,
4 x brass lead tips crimped
10
136
AC centrifugal fans – RadiCal
backward curved, Ø 355
Ø4.5(4x)
M6(4x)
R2
2.5
R69.5
R43.5
Ø372.5
Ø227.1
Ø223.3
Ø101
Ø237
Ø325
Ø350
Ø75
45
0+
20
6
1.5
85
±1
0
161.5 60 90 ±0.2
190 ±1.5
Connection line silicone 9G 0,5 mm2,
9 x brass lead tips crimped
10
137
AC centrifugal fans – RadiCal
backward curved, Ø 400
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170 / 171
n Ped I LWA
Pa
Curves:
(50 Hz) 3 ηmax.
= rpm W A dB(A)
E
A 1 915 130 0,58 69
400 895 145 0,64 62
1,6
4 4 A 2
3 3
C 2 1360 435 2,20 ---
C 3 1340 470 2,33 ---
C 4 1380 400 2,05 ---
E 1 1430 405 1,10 81
200
0,8
A
E 2 1410 480 1,15 75
4
2 2
E 3 1400 515 1,19 67
3 E 4 1410 475 1,15 67
100
0,4
1 1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
138
– Motor protection: Connection for external TOP
– Touch current: <= 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60335-1, CE
– Approvals: A B C D CCC
centrifugal fan
Mass of
Centrifugal fan kg
n Ped I LWA
in H2O
Pa
Curves: 3 ηmax.
= rpm W A dB(A)
(60 Hz) F
600
2,4
D
3
D 3 1430 650 3,00 ---
3 D 4 1535 575 2,60 ---
300
1,2
2
2
F 4 1605 700 1,25 73
3
100
0,4
1 1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Ø 4.5 (4x)
5.5
R5
0
R 90
45°
Ø 266 ±0.5
Ø100
Ø130
Ø420
Ø 257
Ø 345
Ø 370
0
±1
6 85 +20
0
60
1.5
66 Ø115±0.2
182
194±1
Accessory part:
Inlet nozzle 54476-2-4013 Depth of screw max. 12 mm
not included in the standard M6 (4x)
scope of delivery 4x9
0°
Ø 4.5 (4x)
5.5
R5
0
R90
45°
Ø 266 ±0.5
Ø100
Ø130
Ø420
Ø 257
Ø 345
Ø 370
0
±1
6 85 +20
0
60
1.5
66 Ø115±0.2
182
194±1
Connection line silicone 6G 0,5 mm2,
10 6 x brass lead tips crimped
140
AC centrifugal fans – RadiCal
backward curved, Ø 400
Ø 4.5 (4x)
5.5
R5
0
R 90
45°
Ø 266 ±0.5
Ø100
Ø130
Ø420
Ø 257
Ø 345
Ø 370
0
±1
6 85 +20
0
60
1.5
66 Ø115±0.2
182
194±1
141
AC centrifugal fans – RadiCal
backward curved, Ø 450
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 170 / 171
n Ped I LWA
in H2O
Pa
Curves:
(50 Hz) 3 = ηmax. rpm W A dB(A)
C
A 1 960 230 1,15 68
500
2,0
4
B 1 1365 545 2,40 77
3 B 2 1310 630 2,75 74
B 3 1260 690 3,10 69
300
1,2
3
B 4 1295 650 2,85 71
A C 1 1405 495 1,15 77
4
C 2 1370 645 1,30 75
200
0,8
2
C 3 1350 710 1,45 70
3 2 C 4 1370 650 1,30 73
100
0,4
1 1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
142
– Motor protection: Connection for external TOP
– Touch current: <= 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Variable
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: A B EN 61800-5-1, CE C EN 60034, CE
– Approvals: VDE, CCC, GOST, UL, CSA
centrifugal fan
Mass of
Centrifugal fan kg
Ø9(6x)
45°
5.5
R2
0
R 40
R 50
4x90°
Ø300 ±0.5
Ø 286.7
Ø 438.9
Ø 100
Ø 425
Ø 292
Ø 450
Ø 142
Ø 130
Ø 485
6 10
80± +20
800
3
50 Ø115±0.3
140
218
Connection line silicone 6G 0,5 mm2,
10 6 x brass lead tips crimped
Accessory part:
Inlet nozzle 45901-2-2943
Depth of screw max. 12 mm
not included in the standard
240 ±3 scope of delivery
M6 (4x)
Ø9(6x)
45°
5.5
R2
0
R 40
R50
4x90°
Ø300 ±0.5
Ø 286.7
Ø 438.9
Ø 100
Ø 425
Ø 292
Ø 450
Ø 142
Ø 130
Ø 485
6 10
80± +20
800
3
50 Ø115±0.3
140
218
Connection line silicone 6G 0,75 mm2,
10 6 x brass lead tips crimped
144
AC centrifugal fans – RadiCal
backward curved, Ø 450
Ø9(6x)
45°
5.5
R2
0
R 40
R 50
4x90°
Ø300 ±0.5
Ø 286.7
Ø 438.9
Ø 100
Ø 425
Ø 292
Ø 450
Ø 142
Ø 130
Ø 485
6 10
80± +20
800
3
50 Ø115±0.3
140
218
Connection line silicone 9G 0,75 mm2,
10 9 x brass lead tips crimped
145
AC centrifugal fans – RadiCal
backward curved, Ø 500
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 171
n Ped I LWA
in H2O
ηmax.
Pa
500
2,0
400
1,6
300
1,2
200
0,8
100
0,4
1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
146
– Motor protection: Connection for external TOP
– Touch current: <= 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Lateral
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60034, EN 61800-5-1, CE
– Approvals: VDE, GOST
centrifugal fan
Mass of
Centrifugal fan kg
Ø 9 (6x)
8x
45
°
5.5 R2
8
R87
R49
Ø 334.5 ±0.5
Ø 525
Ø 445
Ø190
Ø140
Ø320
Ø 470
1000+20
85±10
6
3.5
75
Ø 162±0.2
227 12
295.5 ±2 Connection line halogen-free 9 x 0,75 mm2,
9 x brass lead tips crimped
148
149
AC centrifugal fans – RadiCal
backward curved, Ø 560
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 171
n Ped I LWA
4,0 in H2O
Pa
Curves:
(50 Hz) 1000 B
3 =ηmax. rpm W A dB(A)
A
A 4 1400 1850 3,85 79
B 1 1635 2275 4,05 88
4 B 2 1590 2730 4,75 84
600
2,4
400
1,6
200
0,8
1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
150
– Motor protection: Connection for external TOP
– Touch current: <= 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Lateral
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60034, EN 61800-5-1, CE
– Approvals: VDE, GOST
centrifugal fan
Mass of
Centrifugal fan kg
Ø9 (6x)
scope of delivery
M10(8x)
8x
45
5.5
°
R 50
22.5°
Ø 418±0.7
Ø190
Ø140
Ø 567
Ø 407
Ø 540
Ø 565
1000+20
85±10
1.5 Ø162±0.2
253 83.5
289±2
18 Connection line halogen-free 9 x 0,5 mm2,
9 x brass lead tips crimped
152
153
AC centrifugal fans – RadiCal
backward curved, Ø 630
current draw(1)
input power(1)
Speed/rpm(1)
connection
Frequency
Capacitor
Electrical
Curve
Max.
Max.
Nominal data
Type Motor VAC Hz rpm W A μF/VDB °C p. 171
n Ped I LWA
in H2O
Pa
Curves:
(50 Hz)
C
3 ηmax.
= rpm W A dB(A)
4
A 2 895 935 2,10 73
700
A 3 880 1030 2,20 71
2,8
3
A 4 885 995 2,15 72
2
4
300
1,2
200
0,8
2
100
0,4
1 1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
154
– Motor protection: Connection for external TOP
– Touch current: <= 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)
– Cable exit: Lateral
– Protection class: I (if customer has provided connection for protective earth)
– Product conforming to standards: EN 60034, EN 61800-5-1, CE
– Approvals: VDE, GOST
centrifugal fan
Mass of
Centrifugal fan kg
n Ped I LWA
in H2O
ηmax.
Pa
320
1,2
3
280
240
200
0,8
160 2
120
0,4
80
40
1
pfs
Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protection
against accidental contact. Suction-side noise levels: LWA as per ISO 13347, LpA measured at 1 m distance to fan axis.
The acoustic values given are only valid under the measurment conditions listed and may vary depending on the instal-
lation situation. With any deviation to the standard setup, the specific values have to be checked and reviewed once
installed or fitted! For detailed information see page 172 ff.
Ø10.5 (6x)
not included in the standard
M10 (8x)
scope of delivery
8x
45
°
5.5
R63.2
R32
R129
.5
Ø 472 ±0.7
Ø605
Ø190
Ø140
Ø 660
Ø 457
Ø 452
Ø600
Ø634
+20
1000
85 ±10
6
2
86.5
Ø 162 ±0.2
290
333±2
18 Connection line halogen-free 9 x 0,75 mm2,
9 x brass lead tips crimped
5.5
R63.2
R32
R129
.5
Ø 472 ±0.7
Ø605
Ø190
Ø140
Ø 660
Ø 457
Ø 452
Ø600
Ø634
+20
1000
85 ±10
6
2
86.5
Ø 162 ±0.2
290
333±2
18 Connection line halogen-free 9 x 0,75 mm2,
9 x brass lead tips crimped
156
157
Inlet nozzles
4x
90
°
0°
6x6
Inlet nozzles without measuring device for backward curved centrifugal fans
Part no. Size Vers. Dimensions
B
0,99
D
0,98
0,97
0,5xD
0,96
H
D
D
0,95
Correction factor for air flow
0,94
0,93
0,92
dh = Hydraulic diameter
Formula: dh = 2 x B x H / (B + H) 1,4 1,6 1,8 2,0 2,2 2,4 2,6 2,8
158
Inlet nozzles with measuring device
Inlet nozzles with measuring device to determine air flow for backward curved centrifugal fans
Part no. Size k-value Dimensions
If constant air flow is to be controlled to, then the nozzle pressure has to be
Δp
kept constant:
Δp = qV2 : k2
159
Air intake guard grilles
a
a
Ød
Ød
e b e b
Air intake guard grilles for backward curved centrifugal fans (according to EN ISO 13857)
Part no. Size Vers. a b d e Strut pitch
subject to alterations
160
Capacitors
Ø a + 3,5
circuit-breaking)
Øa
M8
- Pull-off protector: The housing expands - Mounting: c is the overall dimension of the
by max. 9 mm. The protector responds to over- capacitor which has to be taken into account
max. 9 mm
load by the generated excess pressure snapping when mounting the part. The capacitor de-
off the internal lead in a predetermined break- sign, however, depends on the manufacturer.
ing point. The expansion (9 mm) is either added to di-
mension b, or it is already integrated in the
capacitor.
(VDE 0560/8)
- Calculated life time:
400 V; -25 to +85°C; 30,000 hrs; class A
450 V; -25 to +85°C; 10,000 hrs; class B
161
Connection leads
230 V
85
a
23030-4-1012 450,0
23031-4-1012 1000,0
23032-4-1012 1300,0
23033-4-1012 1600,0
23034-4-1012 2300,0
subject to alterations
162
Electrical connections EC
H5)
Technical features (M3G 055 Speed-controlled):
• Output 10 VDC max. 1,1 mA
• Tach output
• Over-temperature protected motor
• Motor current limitation
• Locked-rotor protection
• Soft start
• Control interface with SELV potential safely disconnected from the mains
PE
1-10V
1
7 4 PE1
10V -> n = max
1V -> n = min
<1V -> n = 0
+10V
6
Imax=1.1mA
10V/PWM
7
47k 47k 1μF
Speed Speed
GND
setting with setting with 4
PWM 1-10kHz potentiometer
15V
Tach 3 1
6 5
680R
Imax=10mA 4 2
ZMM47
7 7
10K
12V
4 4
100% PWM -> n = max
10% PWM -> n = min
<10% PWM -> n = 0
163
Electrical connections EC
H3)
Technical features (M3G 045 / M3G 055 with 2 Speed stages):
• Speed adjustment input (230V)
• Over-temperature protected electronics / motor
• Motor current limitation
• Locked-rotor protection
• Soft start
L AC1 P
CON10
N AC2 N
CON11
SL
CON70
PE
CON10 CON11 CON12
PE1
CON70 CON70
164
Electrical connections EC
H4)
Technical features (M3G 045 / M3G 055 Speed-controlled; M3G 074):
• Control input 0-10 VDC / PWM
• Output 10 VDC max. 1,1 mA
• Tach output
• Over-temperature protected electronics / motor
• Motor current limitation
• Locked-rotor protection
• Soft start
PE
1-10V
CON12
2 1 PE1
10V -> n = max
1V -> n = min
<1V -> n = 0
1 3
+10V
3
Imax=1.1mA 2 4
10V/PWM
2
47k 47k 1μF
Speed Speed
GND
setting with setting with 1
PWM 1-10kHz potentiometer
15V
Tach 3 1
3 4
680R
Imax=10mA 4 2
ZMM47
2 2
10K
12V
1 1
100% PWM -> n = max
10% PWM -> n = min
<10% PWM -> n = 0
165
Electrical connections EC
P5)
Technical features:
• PFC (aktive) • Motor current limitation, Alarm relay
• integrated PID controller • Line undervoltage / phase failure detection
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
• Output 10 VDC max. 10 mA • Locked-rotor protection, Soft start
• Operation and alarm display • Control interface with SELV potential safely disconnected from the mains
• RS485 MODBUS RTU
Full Speed
Speed setting PE
1
8 8 PE
2
PE1
1-10 V
13 12 N
10 V -> n = max 3
1 V -> n = min L
<1 V -> n = 0 5
A2
14
NC
6
COM
7
A1
11
0-10 V
Speed 8 0-10 V
setting with 47 K
potentiometer
RSB
10 RSB 47 K 470 nF
13 RSA
11 RSA
GND
8 12 0V
10 K
10 V
13 10 V
10
12 Imax=10 mA
Line 1 Line 2
0-10 V
+10 V
COM
GND
RSB
RSA
NC
PE
green/yellow blue black white 1 white 2 yellow brown white blue red
166
Electrical connections EC
P6)
Technical features:
• PFC (passive) • Motor current limitation, Alarm relay
• integrated PID controller • Line undervoltage / phase failure detection
• Control input 0-10 VDC / PWM • Over-temperature protected electronics / motor
• Output 10 VDC max. 10 mA • Locked-rotor protection, Soft start
• Operation and alarm display • Control interface with SELV potential safely disconnected from the mains
• RS485 MODBUS RTU
Full Speed
Speed setting PE
1
8 8 PE
2
PE1
1-10 V L1
13 12 3
10 V -> n = max L2
1 V -> n = min 4
<1 V -> n = 0 L3
5
A2
14
NC
6
COM
7
A1
Speed 0-10 V 11
setting with 8 0-10 V
potentiometer 47 K
RSB
10 RSB 47 K 470 nF
13
RSA
11 RSA
8 GND
10 K 12 0V
10 V
13 10 V
12 10
Imax=10 mA
Line 1 Line 2
0-10 V
+10 V
COM
GND
RSB
RSA
NC
PE
L1
L2
L3
green/yellow black black black white 1 white 2 yellow brown white blue red
167
Electrical connections EC
M4)
Technical features:
• PFC (aktive) • Tach output • Control interface with SELV potential
• integrated PID controller • RS485 MODBUS-RTU safely disconnected from the mains
• Control input 0-10 VDC / PWM • Alarm relay
• Input for sensor 0-10 V bzw. 4-20 mA • Line undervoltage / phase failure detection
• External 24 V input (programming) • Motor current limitation
• External release input • Output limit
• Output for slave 0-10 V max. 3 mA • Over-temperature protected electronics / motor
• Output 20 VDC (±20 %) max. 50 mA • Reverse polarity and locked-rotor protection
• Output 10 VDC (+10 %) max. 10 mA • Soft start
+20 V
Ain2 I
Din2
Din3
Aout
GND
Ain1 U
+10 V
Ain1 I
RS B
COM
RS A
Din1
GND
NO
NC
PE
L1
N
Connector Connection Assignment / function
KL1 N Mains supply connection, supply voltage 1~200-277 VAC, 50/60 Hz
L1 Mains supply connection, supply voltage 1~200-277 VAC, 50/60 Hz
PE PE Earth connection, PE connection
KL2 NC Status relay, floating status contact, option 1: break with error, option 2: break with error for run monitor error message
COM Status relay, floating status contact, changeover contact, common connection, contact rating 250 VAC / 2 A (AC1)
NO Status relay, floating status contact, option 1: close with error, option 2: close with run monitor error message
KL3 Din1 Digital input 1: enabling of electronics; enabling: open pin or applied voltage 5 to 50 VDC; disabling: bridge to GND or
applied voltage < 0,8 VDC; reset function: triggers software reset after a level change to < 0,8 V
Ain1 I Analogue input 1 (set value); 4-20 mA; Ri= 100 Ω; parametrisable curve; only usable as alternative to input Ain1 U
+10 V Fixed voltage output 10 VDC; +10 V ±3 %; max. 10 mA; short circuit proof; power supply for ext. devices (e.g. potentiometer)
Ain1U Analogue input 1 (set value); 0-10 V; Ri= 100 kΩ; parametrisable curves; only usable as alternative to input Ain1 I
GND Signal ground for control interface
RSB Bus connection RS485; RSB; MODBUS RTU
RSA Bus connection RS485; RSA; MODBUS RTU
Aout Analogue output 0-10 V; max. 5 mA; output of the actual motor control factor (output voltage of electronics)/of the actual motor speed;
parametrisable curve
Ain2 I Analogue input 2; actual sensor value 4-20 mA; Ri= 100 Ω; parametrisable curve; only useable as alternative to input Ain2 U
+20 V Fixed voltage output 20 VDC; +20 V +25/-10 %; max. 50 mA; short circuit proof; power supply for ext. devices (e.g. sensors)
Ain2 U Analogue input 2; actual sensor value 0-10 V; Ri= 100 kΩ; parametrisable curve; only useable as alternative to input Ain2 I
GND Signal ground for control interface
Din3 Digital input 3: Control characteristic of the integrated controller; according to EEPROM setting, the control characteristic of the integrated control-
ler is normally/inversely selectable per BUS or per digital input; normal: open pin or applied voltage 5 to 50 VDC; inverse: bridge to GND or applied
voltage < 0,8 VDC
Din2 Digital input 2: parameter set switch 1/2; according to EEPROM setting, thr valid/used parameter set is selectable per BUS or per
digital input Din2. Parameter set 1: open pin or applied voltage 5 to 50 VDC; parameter set 2: bridge to GND or applied voltage < 0,8 VDC
168
Electrical connections EC
M5)
Technical features:
• PFC (passive) • Motor current limitation
• integrated PID controller • Alarm relay
• Control input 0-10 VDC / PWM • Line undervoltage / phase failure detection
• External release input • Over-temperature protected electronics / motor
• External 24 V input (programming) • Reverse polarity and locked-rotor protection
• Output 10 VDC max. 10 mA • Soft start
• Operation and alarm display • Control interface with SELV potential safely disconnected from the mains
• RS485 MODBUS-RTU
KL2 KL1
5 6 7 8
Ain1 U
+10 V
Din1
NC
RS B
RS A
GND
PE
L1
L2
L3
C
1 2 3 4 1 2 3
169
Electrical connections AC
A1) / A2a)
L PE N U1 = blue
C
U2 = black
Z = brown
U1 U2 Z = green/yellow
TOP
L PE N U1 = blue
C TOP U2 = black
Z = brown
U1 U2 Z
= green/yellow
170
Electrical connections AC
D2) / F1a)
PE L1 L2 L3 TOP
U1 = black
U2 = green
U1 V1 W1
V1 = blue
V2 = white
W1 = brown
U2 V2 W2
W2 = yellow
= green/yellow
PE L1 L2 L3 TOP
U1 = blue
U2 = green
U1 V1 W1 V1 = blue
V2 = white
W1 = brown
U2 V2 W2
W2 = yellow
= green/yellow
171
Technical parameters & scope
General performance parameters The majority of our products use maintenance-free ball bearings for
Any deviations from the technical data and parameters described here any mounting position possible. As an option, sleeve bearings can be
are listed on the product-specific data sheet. used, which is indicated on the product-specific data sheet wherever
applicable.
Type of protection
The service life L10 of the ball bearings can be taken as approx. 40,000
The type of protection is specified in the product-specific data sheets.
operating hours at an ambient temperature of 40 °C, yet this estimate
Insulation class can vary according to the actual ambient conditions.
The insulation class is specified in the product-specific data sheets. We will gladly provide you with a lifetime calculation taking into account
your specific operating conditions.
Mounting position
The mounting position is specified in the product-specific data sheets. Motor protection / thermal protection
Information on motor protection and thermal protection is provided in the
Condensate discharge holes product-specific data sheets.
Information on the condensate discharge holes is provided in the Depending on motor type and field of application, the following protective
product-specific data sheets. features are realised:
Mode of operation – Thermal overload protection (TOP), either in-circuit or external
The mode of operation is specified in the product-specific data sheets. – PTC with electronic diagnostics
– Impedance protection
Protection class – Thermal overload protection (TOP) with electronic diagnostics
The protection class is specified in the product-specific data sheets. – Current limitation via electronics
If an external TOP is connected, the customer has to make sure to
Service life
connect a conventional trigger device for switching it off.
The service life of ebm-papst products depends on two major factors:
Products without fitted TOP and without protection against improper use,
– The service life of the insulation system
a motor protection complying with the valid standards has to be installed.
– The service life of the bearing system
The service life of the insulation system mainly depends on voltage level, Mechanical strain / performance parameters
temperature and ambient conditions, such as humidity and condensation. All ebm-papst products are subjected to comprehensive tests complying
The service life of the bearing system depends mainly on the thermal load with the normative specifications. In addition to this, the tests also reflect
on the bearing. the vast experience and expertise of ebm-papst.
172
Vibration test Standards
Vibration tests are carried out in compliance with Information on standards is provided in the product-specific data sheets.
– Vibration test in operation according to DIN IEC 68, parts 2-6
EMC
– Vibration test at standstill according to DIN IEC 68, parts 2-6
Information on EMC standards is provided in the product-specific data
Shock load sheets.
Shock load tests are carried out in compliance with Complying with the EMC standards has to be established on the final
– Shock load according to DIN IEC 68, parts 2-27 appliance, as different mounting situations can result in changed EMC
properties.
Balancing quality
Testing the balancing quality is carried out in compliance with Leakage current
– Residual imbalance according to DIN ISO 1940 Information on the leakage current is provided in the product-specific
– Standard balancing quality level G 6.3 data sheets.
Should you require a higher balancing quality level for your specific Measuring is according to IEC 60990.
application, please let us know and specify this when ordering your
Approvals
product.
In case you require a specific approval for your ebm-papst product
Chemo-physical strain / performance parameters (VDE, UL, GOST, CCC, CSA, etc.) please let us know.
Should you have questions about chemo-physical strain, please direct Most of our products can be supplied with the relevant approval.
them to your ebm-papst contact. Information on existing approvals is provided in the product-specific
data sheets.
Fields of application, industries and applications
Our products are used in various industries and applications: Air performance measurements
Ventilation, air-conditioning and refrigeration technology, clean room All air performance measurements are carried out on suction side and on
technology, automotive and rail technology, medical and laboratory tech- chamber test beds conforming to the specifications as per ISO 5801 and
nology, electronics, computer and office technology, telecommunications, DIN 24163. The fans under test are installed in the measuring chamber at
household appliances, heating, machines and plants, drive engineering. free air intake and exhaust (installation category A) and are operated at
Our products are not designed for use in the aviation and aerospace nominal voltage, with AC also at nominal frequency, and without any
industry! additional components such as guard grilles.
As required by the standard, the air performance curves correspond to
Legal and normative directives
an air density of 1.2 kg/m3.
The products described in this catalogue are designed, developed and
produced in keeping with the standards in place for the relevant product
and, if known, the conditions governing the relevant fields of application.
173
Technical parameters & scope
Measurement conditions for air and noise measurement Sound pressure level and sound level
ebm-papst products are measured under the following conditions: All acoustic values are established according to ISO 13347, DIN 45635
– Axial and diagonal fans in direction of rotation “V” in full nozzle and and ISO 3744/3745 to accuracy class 2 and given in A-rated form.
without guard grille When the sound pressure level (Lp) is measured, the microphone is on
– Backward curved centrifugal fans, free-running and with inlet nozzle the intake side of the fan being tested, usually at a distance of 1 m on
– Forward curved single and dual inlet centrifugal fans with housing the fan axis.
To measure the sound power level (Lw), 10 microphones are distributed
Noise measurements
over an enveloping surface on the intake side of the fan being tested
All noise measurements are carried out in low-reflective test rooms with
(see graphic). The sound power level measured can be roughly calculated
reverberant floor. Thus the ebm-papst acoustic test chambers meet the
from the sound pressure level by adding 7 dB.
requirements of precision class 1 according to DIN EN ISO 3745. For noise
measurement, the fans being tested are placed in a reverberant wall and
Measuring configuration as per ISO 13347-3 respectively DIN 45635-38:
operated at nominal voltage (for AC, also at nominal frequency) without
10 measuring points
additional attachments such as the guard grille.
d≥D
h = 1,5d ... 4,5d
Measurement area S = 6d2 + 7d (h + 1,5d)
1,5d
D
3d
2d
174
Combined level of multiple same-level sound sources
15
[dB(A)]
[dB]
Adding 2 noise sources with the same level results in a level increase of approx. 3 dB.
The noise characteristics of multiple identical fans can be determined in advance based on
10
9
Example: 8 A3G800 axial fans are on a condenser. According to the data sheet, the sound pres-
sure level of a fan is approximately 75 dB(A). The level increase measured from the diagram is
9 dB. Thus the overall sound level of the installation can be expected to be 84 dB(A).
5
0
1 2 3 4 5 6 7 8 9 10 15 20 25
The acoustic performance of two different fans can be predetermined based on the sound
levels given in the data sheet. This is shown in the diagram opposite.
Increase in sound pressure / sound power level
Example: There is an axial fan A3G800 with a sound pressure level of 75 dB(A) at the operating
2
point and an axial fan A3G710 with 71 dB(A) in a ventilation unit. The level difference is 4 dB.
1,5
The level increase can now be read in the diagram as approx. 1.5 dB. This means that the
overall sound level of the unit can be expected to be 76.5 dB(A).
1
0
0 4 8 12 16 20 24
[dB]
Difference in level with two sources of sound [dB(A)]
Distance laws
0
[dB(A)]
[dB]
Sound power level is independent of distance to the sound source. In contrast to this, sound
pressure level decreases the further away the noise source is. The adjacent diagram shows the
-10
decrease in level under far sound field conditions. Far sound field conditions apply whenever the
distance between microphone and fan is big when compared to fan diameter and wavelength to
Decrease in sound pressure level
-20
be considered. For more information on far sound field, please consult the relevant literature on
this complex topic. Per doubling of distance, the level in the far sound field decreases by 6 dB.
-26
In the near field of the fan, other correlations apply and the decrease in levels can be consider-
-30
ably smaller. The following example only applies to far sound field conditions and can vary
strongly depending on the installation effects:
-40
With an axial fan A3G300, a sound pressure level of 65 dB(A) was measured at a distance of 1 2 5 10 20 50 100
Distance [m]
1 m. According to the adjacent diagram, at a distance of 20 m we would get a reduction by
26 dB, i.e. a sound pressure level of 39 dB(A).
175
ebm-papst in Germany
ebm-papst Mulfingen GmbH & Co. KG ebm-papst St. Georgen GmbH & Co. KG ebm-papst Landshut GmbH
Bachmühle 2 Hermann-Papst-Straße 1 Hofmark-Aich-Straße 25
74673 Mulfingen 78112 St. Georgen 84030 Landshut
GERMANY GERMANY GERMANY
Phone +49 7938 81-0 Phone +49 7724 81-0 Phone +49 871 707-0
Fax +49 7938 81-110 Fax +49 7724 81-1309 Fax +49 871 707-465
info1@de.ebmpapst.com info2@de.ebmpapst.com info3@de.ebmpapst.com
176 fan agent compact fan agent motor specialist motor agent
ebm-papst in Europe
177
ebm-papst in Europe
178 fan agent compact fan agent motor specialist motor agent
ebm-papst in America and Africa
179
ebm-papst in Asia and Australia
180 fan agent compact fan agent motor specialist motor agent
181
Notes
182
183
www.ebmpapst.com 37850-7-8811 · 2013-05 · KD-3’
Printed in Germany
ebm-papst
Mulfingen GmbH & Co. KG
Bachmühle 2
74673 Mulfingen
Germany
Phone +49 7938 81-0
Fax +49 7938 81-110
info1@de.ebmpapst.com