How to write drums on Sibelius - to add the hi-hats select a quaver on the
keypad and voice 2 to give you a green note
- Press i on the keyboard and add a drum - now press shift-alt-1 and your notehead will kit change to a cross - start by adding bass and snare, choose a - drop it on the top line and press r to repeat it note on the keypad and click on the first beat of the bar. The first bass drum note is now created. - the snare drum goes on the c line, either drop it on top of the bass drum or on the
bass drum snare drum keypad
- Or watch this youtube clip:
http://www.youtube.com/watch?v=F1FHL6aJTME - or this one: http://www.youtube.com/watch?v=tRSXVuT7rZE&NR=1 - - Create the notes of the HH and Cymb in voice 1 (pointer is blue, 1 is lit blue on the Keypad). - - When the bar is full with the HH and Cymb notes, select the bar (single rectangle) and open the "Notes" tab in the Properties window. - In that "Notes" tab, select the crossed notehead (1). All notes in the bar now have the right notehead. - Note that all the noteheads in the "Notes" pull down menu have a number. Use this number as a keyboard shortcut. In this case, instead of selecting the notes in the pulldown menu, you could have typed Shift+Alt+1 (the "1" on the Main Keyboard, not the numeric one!). - Hit Esc (nothing selected) - On the Keypad (or with the numeric keyboard), select the rhythmic value of the first note of the bass drum. - Type Alt+2 (the "2" on the Main Keyboard). The pointer is now green and the "2" on the Keypad is lit green. - Click on the first beat of the bar. The first bass drum note is now created. - Keep creating the bass drum / snare drum pattern as you would normally do. - When the bar is full, hit Esc.