Professional Documents
Culture Documents
SYSTEMS
Your safety. Our technology.
HOCHIKI GLOBAL NETWORK AND PROJECTS
HOCHIKI AUSTRALIA
SALES TERRITORIES
ALL OCEANIA INCLUDING NZ,
PAPUA, FIJI
HOCHIKI MEXICO
Brisbane International
Airport, Australia
HOCHIKI BANGKOK
Melbourne International
Airport, Australia
Windser Barra Hotel, Vicom Center, NTT Singapore,
Rie de Janeiro Brazil Ho Chi Mihn Vietnam Singapore
HOCHIKI AUSTRALIA
HOCHIKI ASIA PACIFIC HOCHIKI JAKARTA
04 HOCHIKI SYSTEM
solutions. With a heritage of innovative design and technical support suited to local standards
leading-edge technologies, Hochiki’s products have and customer requirements.
acquired global acceptance as the bench mark
Total commitment to meeting the needs of individual
29
SENSORS FOR Hochiki is an independent, multi-national, publicly
FIRENET, NFP, PHOENIX PANELS DETECTION listed company with over 1500 employees across Hochiki’s vision is to provide products to the highest
levels of quality and reliability. Complying with industry
10 NEW INTRINSICALLY
five manufacturing plants, thirty-one sales offices
22 32
TAKTIS VIRTUAL CONVENTIONAL AND DEVICES SAFE and eleven subsidiaries. The company’s global sales standards, the ultimate quality of Hochiki’s comprehensive
RESOURCE FOR SIGMA CP PANELS FIRE DETECTION turnover exceeds $750 million per annum. range of products virtually eliminates false alarms
and, combined with ease of installation, offers the
12 26 34
Hochiki invests in manufacturing innovation on greatest reliability with the lowest total cost of
ANALOGUE SENSORS AND CONVENTIONAL ANCILLARY
a continual basis to ensure customer satisfaction ownership possible in a modern life safety system.
DEVICES FOR TAKTIS AND DETECTORS EQUIPMENT
and production facilities in Japan, the United States
SYNCRO AS PANELS
HOCHIKI SYSTEM
HIGH INTEGRITY CONFIGURABLE NETWORK
Control Panel is manufactured by Hochiki Group Company,
Kentec Electronics Ltd. and distributed by Incite fire Pty Ltd.
LOOP 3 - LOOP 16
LOOP 3 - LOOP 8
(if fitted)
(if fitted)
Each loop is capable Each loop is capable
of hosting up to: of hosting up to:
127 devices, plus 127 devices, plus
LOOP 2 LOOP 1
LOOP 1 LOOP 2
VR PRINT - E
liminates need for
panel mounted printers
Plug in slots
K772 K791 K792 K793
16 Channel 8 Way 8 Way Conventional 4 Way
I/O Board Relay Board Zone Board Sounder Board
Cloud Servers
Up to 500 mA are available for each detection Sophisticated network analysis tools provide
loop allowing for a generous quantity of loop the ability to identify connection problems instantly
powered devices. and the commissioning mode allows individual
panels to be prevented from transmitting events
The four sounder circuits are each capable of supplying to the network while maintaining communications.
up to 2.5A at 24V to audio and audio visual devices.
Adding a Taktis “Bridge” Network Card to your Taktis
Manage systems remotely from any location is a simple Panel or Taktis Network provides an interface between
and effective manner by configuring a Taktis Media existing Syncro and Taktis Control Systems providing
Gaterway communication device to the Virtual backward compatibility and a unique upgrade path.
Resource Servers and browser based software.
TAKTIS FEATURES
• AS7240-2, AS7240-4 and AS4428-3 • Over 20,000 cause and effect entries
• Support for up to 2000 zones • Maximum of 50,000 devices NOT and TIME
as well as COINCIDENCE, OR and AND operators
• Built in programmable I/Os
in cause and effects
•U
p to 512 programmable I/O via optional plug
• Option to “invert” inputs and outputs
COMPATIBLE EQUIPMENT & EXTRAS in cards
• 9999 event log with one second resolution
• Modbus, LonWorks and BACnet interface options
• Powerful, standard configuration templates
•F
ull colour, 7” 800 x 480 touch screen
graphical display • Network up to 128 panels
• Fully automatic display brightness adjustment • Configurable via USB port to PC or memory stick
• 80 character point and zone text • Optional Media Gateway communications card
Based on an all new hardware and software platform, Available in several standard formats, Taktis Vision
the large, full colour graphical display with touch screen can be mounted directly onto a wall, be recessed using
functionality, delivers information on the status of our quick-fix adaptor frame or fully flush mounted.
the fire alarm system to single or multiple locations. Special enclosure finishes and colours are also available
to match existing decor.
Taktis Vision repeaters can be configured to offer
full display and control to replicate the functionality
of the fire Control Panel or to operate as a simple,
display only device for applications where access to
control the fire alarm system would be inappropriate.
•F
ull indication of all information displayed
at the fire Control Panel
• Configurable functionality
• Configurable languages
VR ACCESS
TAKTIS VR FEATURES
Gain access to data from all of your systems,
• Unique Life Safety management utility
assess performance, check status’ and make
decisions based on facts, not assumptions. • Remote access to system data from anywhere
“
• Slim profile – only 8mm
square cable clamps for secure and reliable cable termination, • Rugged wiring contacts
it is also capable of driving a remote LED if required. • Facility for remote indicator
(Red version – YBO-R/3(RED) for use with CHQ-WS2 • Quick connection via square cable clamps
Hochiki’s comprehensive Analogue Addressable range is suitable for even the most Wall Sounder and CHQ-WSB Wall Sounder Beacon) • Available in RED for use with CHQ-WS2
Wall Sounder and CHQ-WSB Wall
demanding applications and incorporates high performance sensors, a wide selection Sounder Beacon
of input and output modules and ancillaries. All products use Hochiki’s high integrity
communications link.
• High Performance Chamber • Detects short circuits on loop
ALK-ASN YBO-R/SCI
• Twin fire LEDs allow 360° viewing • Status LED
A Photoelectric Smoke Sensor incorporating Hochiki’s unique • Locking mechanism (sensor to base) A Loop Isolator Base which is fully compatible with Hochiki • Connection of up to 127 per loop
High Performance Chamber, allows the sensor threshold • Variable sensitivity analog sensors, beacons, sounders and indicators. The unit • Quick connection via square cable clamps
level to be increased, improving the signal to noise ratio • Electronically addressed incorporates an amber LED to show when it is isolating • Available as a DIN Rail Module
and reducing susceptibility to false alarms. • Compatible Bases: YBN-R/3, a section of the loop. • Available in RED for use with CHQ-WS2
YBO-BS, YBO-BSB, YBO-R/SCI (Red version – YBO-R/SCI(RED) for use with CHQ-WS2 Wall Sounder & CHQ-WSB Wall
• Approval: AS7240.7 Wall Sounder & CHQ-WSB Wall Sounder Beacon) Sounder Beacon
• Loop powered
YBO-BS CHQ-SIM
• Includes a single monitored input
• Single loop address – addressed • Small design for simple provision of a
An Addressable Loop-Powered Base Sounder providing automatically by Control Panel or via A Single Input Module designed to allow a single monitored monitored input onto an analogue loop
13 volume levels and 51 tones with a maximum output of up the TCH-B100 hand held programmer input to be connected to the Analogue loop. This provides a • Flying leads for easy installation
to 98 dB(A) (±2 dB(A)) with low current consumption. The unit • 50 ~ 98 dB(A) (±2 dB(A)) output at 1m compact, low-cost option where the installation of the larger • Addressed with TCH-B100 Hand
is designed to fit either the YBN-R/3 or the YBO-R/SCI* Bases. • Fits Hochiki standard or isolator base CHQ ‘Smart-Fix’ range of modules might be difficult. Held Programmer
(*From batch number 6044) and supports ESP sensors, beacons
and remote indicator
• 51 user-selectable tones
(all tones EN54-3 compatible)
• Loop powered
YBO-BSB
• Loop powered
• Single loop address, addressed by either
CHQ-DIM(SCI)
• Single loop address
An Addressable Loop-Powered Base Sounder Beacon Control Panel or TCH-B100 A Dual Input Module designed to interface to a variety • Two independent inputs for monitoring
providing 13 volume levels and 51 tones with a maximum • 50 ~ 98 dB(A) (±2 dB(A)) output at 1m of inputs such as door contacts, sprinkler flow/door switches of volt-free contacts
output of up to 98 dB(A) (±2 dB(A)) with low current •F its Hochiki standard or isolator base and plant equipment. Also available as a DIN Rail mountable • Each input can be configured to monitor
consumption. The unit is designed to fit either the and supports ESP sensors, beacons version. Both models feature an integral Short-Circuit Isolator. either normally open or normally closed contacts
YBN-R/3 or the YBO-R/SCI* Bases. and remote indicators • DIN Rail version available
(*From batch number 6044) • 51 user-selectable tones • Both models feature an integral
(all tones EN54-3 compatible) Short-Circuit Isolator
• Beacons and sounders can be controlled
independently*
* Please ensure Control Panel compatibility
“
as a DIN Rail mountable version. Both models feature an integral contacts
Short-Circuit Isolator. • DIN Rail version available
• Both models feature an integral
Short-Circuit Isolator
Hochiki’s FIREwave system raises wireless fire detection and alarm systems to new levels
of reliability and flexibility. The system utilises the latest wireless technology to provide
• Single loop address
rapid, yet economic wireless fire system installations with minimal disturbance to its
CHQ-DSC(SCI)
• Two independent sounder circuits surroundings. Ideal for historic buildings, remote sites and any project where the
A Dual Sounder Controller, which has been designed to • Each circuit fully monitored for open
provide two sounder outputs (that can be driven separately) and short circuit faults installation of fire cabling is difficult, overly expensive or prohibited.
with full fault monitoring. The monitored input can be used for • Each alarm circuit fused at 1 amp
local power supply fault monitoring or as a general-purpose • Auxiliary monitored Input
input and features an integral Short-Circuit Isolator. • Loop powered
• Outputs are synchronised and can be RSM-WTM-AS
driven continuously or intermittently • Bi-directional wireless communication
A Wire to Wireless Translator Module which allows a wireless • Self optimising wireless amplitude
• 24 Vdc auxiliary power required
fire detection system to be interfaced directly onto the loop. and frequency
• Features an integral Short-Circuit Isolator
Fully loop-powered, the unit can support up to 32 wireless • Automatic wireless channel hopping
devices* or up to 7 RSM-EXP-AS Expander Modules**. • Fully intelligent
• High reliability and sensitivity
• Flexible on site device adjustment
• Exterior mounting protection
• Loop powered
CHQ-SZM(SCI) • Makes additions to existing wired systems
• Up to 6 conventional detectors
A Single Zone Monitor designed to allow up to 6 conventional easy and cost effective
• Single loop address
detectors to be interfaced to Hochiki’s Analogue Addressable • Approved to AS4428.9-2006, EN54-17, 18
• Remote LED output
system. Also available as a DIN Rail mountable version. • Fully monitored for short and
Both models feature an integral Short-Circuit Isolator. open circuit faults
• Bi-directional wireless communication
• DIN Rail version available RSM-EXP-AS
• Both models feature an integral • Self optimising wireless amplitude
A Wire to Wireless Expander Module which allows extended and frequency
Short-Circuit Isolator
signal coverage for the wireless system by boosting signal • Automatic wireless channel hopping
strengths from translators, to cover larger buildings • Fully intelligent
for example. Up to 7 RSM-EXP-AS Expander Modules** • High reliability and sensitivity
can be supported by a single RSM-WTM-AS Wireless • Flexible on site device adjustment
Translator Module. • Exterior mounting protection
• Makes additions to existing wired systems
• Fast response
HCP-E(SCI) easy and cost effective
• Integral Short-Circuit Isolator
A Manual Call Point Isolator fully compatible with Hochiki’s • Requires external power supply (9 ~ 27 Vdc)
• Bicolour status LED
Analogue Addressable protocol and featuring an integral • Approved to AS4428.9-2006, EN54-18
• Non-frangible element fitted
Short-Circuit Isolator (SCI). Features a bicoloured LED as standard (conforms to EN54)
to indicate either fire (red) or short-circuit (amber). • Addressed with TCH-B100
Also features plug-in wiring terminals for easy installation. Hand Held Programmer
*Maximum number of 16 output devices
Note – requires SR-BACKBOX if surface mounted (sold separately). • Surface or flush mounting
such as A/V or output modules.
• Weatherproof version available:
**Maximum of 5 child Expander Modules
HCP-W(SCI)
connected in cascade or a maximum
of 3 child Expander Modules connected
directly to the Translator Module
or another Expander Module
• Fast response
HCP-W(SCI)
• Integral Short-Circuit Isolator
An IP67 Weatherproof Manual Call Point Isolator fully • Bicolour status LED
compatible with Hochiki’s Analogue Addressable protocol • Non-frangible element fitted
and featuring an integral Short-Circuit Isolator (SCI). as standard (conforms to EN54)
Features a bicoloured LED to indicate either fire (red) • Addressed with TCH-B100
or short-circuit (amber). Also features plug-in wiring Hand Held Programmer
terminals for easy installation. • IP67 rated
• Input circuits are monitored for fire • Thermistor-type heat sensing element
RSM-IP-AS RHD-E-AS
and fault conditions • Bi-directional wireless communication
A Wireless Single Channel Input Module which allows • Bi-directional wireless communication A Wireless Intelligent Rate of Rise Heat Sensor • Adaptive signal processing helps
the on/off status (alarm/fault) of an external device to be with a thermistor sensing element. The sensor is fitted
• Self optimising wireless amplitude with the elimination of false alarms
transmitted to a Control Panel wirelessly via an RSM-CIM-AS, with a single omni-directional LED and a reed switch
and frequency • Automatic wireless channel hopping
facility allowing testing using a magnet.
RSM-EXP-AS or RSM-WTM-AS. • Automatic wireless channel hopping • Fully intelligent with high reliability
• Fully intelligent and sensitivity
• High reliability and sensitivity • Flexible on site device adjustment
• Flexible on site device adjustment • Makes additions to existing wired
• Makes additions to existing wired systems systems easy and cost effective
easy and cost effective • Approved to AS7240.5-2004 class
• Approved to AS4428.9-2006, EN54-18 A1R, AS4428.9-2006
“
• Bayonet slot, low insertion force for detectors
New Conventional Fire Detection. Hochiki’s Conventional Range offers one of the most
extensive product portfolios available, providing solutions for most conventional fire
applications, with a heritage of innovative design and leading edge technologies.
• Integral remote indicator output
• Remote indicator output YBO-R/6PA
SLV-AS3 • Rugged design
• Wide voltage range (9.5 ~ 30 Vdc) A Model YBO-R/6PA is a Conventional Detector Mounting
The SLV-AS3 is a Photoelectric Smoke Detector which is fully • Dedicated cable screen terminal
• Low profile design with one piece outer cover Base for 2 wire Systems where detectors and sounders
compatible with the majority of existing conventional systems. •Q uick connection via square cable
• Twin fire LEDs allow 360° viewing are on the same zone cables.
The SLV-AS3 incorporates Hochiki’s unique High Performance clamps accepts up to 2.5mm2 cables
• Range of mounting bases
Photoelectric Smoke Chamber removing the need to use Ionisation • Bayonet slot, low insertion force for detectors
• Approval: AS7240.7
Detectors in the majority of applications. An integral third
terminal provides a remote indicator output.
• Robust design
CSB-E
• Robust design
• Low current consumption
BANSHEE EXCEL LITE IP66 (BEL-SBDB)
• Low current consumption
A Conventional Base Sounder which has been designed • Easy to install An Electronic Conventional Sounder Beacon comes • Easy to install
to complement the Hochiki conventional range of detectors. • Maximum 93 dB(A) at 1m (Tone 1) with a deeper IP66 back box, which enables the unit
• Xenon beacon technology
Improved electronic design enables very low current to be installed externally.
• 32 user-selectable tones and 3 user- • Deep base provides IP66 protection
consumption whilst providing a range of tones and volumes selectable volumes • Maximum 110 dB(A) at 1m (dependant
selectable from each unit. • Utilises high intensity LEDs on tone selected)
• Lockable cap available (CS/CAP) • 32 user-selectable tones
• Robust design •S
upports either a ‘Frangible Glass’ element
BANSHEE EXCEL IP66 (BE-SDB) CCP-W
• Low current consumption or a ‘Non Frangible Plastic’ element
An Electronic Conventional Sounder comes with a deeper • Easy to install The CCP-W is a IP67 Weatherproof conventional call point •T
erminals can accommodate up to a 2.5mm2
IP66 back box, which enables the unit to be installed externally. • Deep base provides IP66 protection based upon the industry standard KAC world series housing solid conductor
• Maximum 110 dB(A) at 1m (dependant and features easy to install, push fit wiring terminals. The unit • Approved to EN54
on tone selected) can support either Frangible Glass element or Non Frangible • Weatherproof IP67
• 32 user-selectable tones Plastic element. • Rugged design
Note – requires SR-BACKBOX if surface mounted (sold separately).
CONVENTIONAL DETECTORS
• 5 – 100m range
SPC-AS
• Automatic compensation
A Conventional Beam Smoke Detector that consists of an • Automatic signal strength adjustment
“
emitter and receiver that cover a distance of 5 – 100m providing • Features a Latching or Non-Latching
a maximum coverage of 1500m2. Features an automatic signal Fault Relay
strength adjustment facility and is also available with a latching • Can be interfaced onto Hochiki Analogue
or a non-latching relay. system via CHQ-DZM or CHQ-SZM
Conventional Fire Detection. Hochiki’s Conventional Range offers one of the most extensive • Approval: AS7240.12
product portfolios available, providing solutions for most conventional fire applications,
with a heritage of innovative design and leading edge technologies.
“
(MAXIMUM NUMBER OF DEVICES ALLOWED PER AZF) All marine fire detection products have been approved by either Lloyds Register
or Germanischer Lloyd. They are ideal for marine use, such as on ships and oil rigs.
DETECTOR
THERMAL
THERMAL
THERMAL
THERMAL
DFJ-60B
DFJ-90D
SIJ-ASN
SLV -AS
SLR-AS
SMOKE
SMOKE
DCD-C
DCD-A
• Removable, High Performance Chamber
ALG-ENM
• Twin fire LEDs allow 360° viewing
ZONESENSE 40 40 40 40 40 40 A Marine Approved Analogue Addressable Photoelectric • Locking mechanism (sensor to base)
AB1000, AB800, AB2000, AP1542 39 39 39 39 39 31 Smoke Sensor incorporating Hochiki’s unique High Performance • Variable sensitivity
Chamber which allows the sensor threshold level to be increased, • Electronically addressed
AP 1671 FIREFINDER 40 40 40 40 40 40 thereby improving the signal to noise ratio and reducing • Pulsing/non-pulsing controlled from panel*
AMPAC AB3000, AP1417, 40 40 40 40 40 40 susceptibility to false alarms. • Approved to MED by GL
XP 95 DEVICE 40 40 40 40 40 40 * Please ensure Control Panel compatibility
AB04 33 33 33 33 33 26
SIMPLEX 2120 28 28 28 28 28 23
4100 33 33 33 33 33 27
• Loop powered
CHQ-DIM/M (SCI) SLR-E3NM
• High Performance Chamber
• Single loop address • Remote indicator output
A Marine Approved Analogue Addressable Dual Input • Two independent inputs for monitoring A Marine Approved Conventional Photoelectric Smoke • Wide voltage range (9.5 ~ 30 Vdc)
Module designed to interface to a variety of inputs such of volt-free contacts Detector which is fully compatible with the majority • Low profile design with one piece outer cover
as door contacts, sprinkler flow/door switches and plant • Each input can be configured to monitor of existing Marine Conventional systems and incorporates • Twin fire LEDs allow 360° viewing
equipment. Features an integral Short-Circuit Isolator. either normally open or normally a remote indicator output. • One master base
closed contacts • Approved by LPCB, LR and GL
• Features an integral Short-Circuit Isolator
• Approved to MED by GL
• Loop powered
CHQ-DRC/M (SCI)
• Electronic linear heat detection
• Single loop address
DCD-AE3M
• Remote indicator output
A Marine Approved Analogue Addressable Dual Relay • Two independently controlled A Marine Approved Conventional Rate of Rise Heat Detector • Wide voltage range (9.5 ~ 30 Vdc)
Controller designed to provide two general-purpose relay changeover relays incorporating a 90°C fixed temperature element. The thermistor • Twin fire LEDs allow 360° viewing
outputs, each output can be controlled independently • Relays contact rated at 30 Vdc at 1 amp and linearising circuit provide an accurate linear response • Approved by LPCB, LR and GL
and used to control dampers, plant and equipment shutdown. • Auxiliary monitored input heat detector. A third terminal provides integral remote
The monitored input can be used for local power supply fault • Features an integral Short-Circuit Isolator indicator output.
monitoring or as a general-purpose input. Features an integral • Approved to MED by GL
Short-Circuit Isolator.
• Fast response •4 glanded cable entry holes (glands not supplied)
HCP-EM MBB-1
• Status LED • Colour matched
A Marine Approved Analogue Addressable Manual Call Point • Non-frangible element fitted as standard A Marine Back Box providing a splash proof and secure fixing • Approved sensor and base range
fully compatible with Hochiki’s Analogue Addressable protocol (conforms to EN54) for the Hochiki Analogue and conventional marine approved • Provides moisture and dust resistant fixing
and featuring plug-in wiring terminals for easy installation. • Addressed with TCH-B100 Hand range of sensors and detectors and their associated bases. • Ideal for bulk-head fixing
Note – requires SR-BACKBOX if surface mounted (sold separately). • Held Programmer Provides an aesthetically pleasing solution where surface • Approved by LR and GL
• Surface or flush mounting fixed devices are required. The housing supports four • Non-marine use version available (SBB-1)
• Weatherproof IP67 version 20mm glanded entries for cabling access.
available (HCP-WM)
• Approved to MED by GL
“
in hazardous areas and based upon the industry solid conductor
standard KAC world series housing. • Approved to EN54 part 12
• Rugged design
Hochiki’s Intrinsically Safe Conventional range of products has been designed around
•A TEX classification to II 1G EEx ia IIC T4
the existing world-proven Hochiki conventional range. The detectors have been approved
for hazardous area use by both LPCB and Germanischer Lloyd.
ANCILLARY EQUIPMENT
• Designed to house up to 4 Hochiki DIN modules
SMB-3
• Quick-release screws
An IP66 rated, grey (RAL7035) enclosure designed for • Polyurethane gasket provides IP66 protection
use with the Hochiki range of DIN modules. Supplied with • Corrosion free, resistant to most alkaline and acid
a transparent black lid as standard. The unit is supplied • Temperature resistance to +70°C,
with a DIN Rail section (plus fixings) and will accept impact resistant, and non-flammable
up to four Hochiki DIN Rail modules, side-by-side. • 20 metric knock-outs
• Install quickly and easily • Supplied with DIN Rail and fixings
DH-98-ASA AND DH-98-ASC
• No screens or filters to clean
A Duct Probe Housing associated with analogue ALK-AS, • Rugged gray steel back box with clear cover
ALK-ASN detectors and conventional SLV-AS detector
to be mounted on the outside of an air duct for the purpose
of monitoring the air within the duct. (Shown with sensor
fitted – not supplied).
•4 glanded cable entry holes
SBB-1
(glands not supplied)
A Back Box providing a splash proof and secure fixing • Colour matched
which for the Hochiki Analogue and conventional range • Approved sensor and base range
of sensors and detectors and their associated bases. • Provides moisture and dust resistant fitting
Provides an aesthetically pleasing solution where surface • Ideal for bulk head fitting
• Lightweight design
TC H-B100 fixed devices are required. The housing supports four • Marine use (MBB-1)
• Quick and reliable addressing
20mm glanded entries for cabling access.
A Hand Held Address Programmer designed to address •O ver 8000 address settings from
the range of Sensors and other addressable devices such one battery
as the YBO-BS Base Sounder. Designed to be light, robust • Displays sensor analogue value
and easy to use it operates from a single PP3 size 9v battery
which can provide up to 8000 operations. (Shown with
sensor fitted – not supplied).
• Designed to house up to 6 Hochiki DIN modules •P rotects wiring terminals on isolator
SMB-2 SI-CAP
• Quick-release screws bases and base sounders
An IP66 rated, grey (RAL7035) enclosure designed for use • Polyurethane gasket provides IP66 protection A Protective Cap which can be fitted to the YBO-R/SCI isolator • Easy to fit
with the Hochiki range of DIN modules. Supplied with a transparent • Corrosion free, resistant to most alkaline base range, the YBO-BS base sounder or the YBO-BSB base
black lid as standard. The unit is supplied with a DIN Rail section and acid sounder beacon – when either of these devices isn’t fitted
(plus fixings) and will accept up to six Hochiki DIN Rail • Temperature resistance to +70°C, with a sensor.
modules, side-by-side. impact resistant, and non-flammable
• 32 knock-outs
• Supplied with DIN Rail and fixings
DISTRIBUTED BY
For NSW, ACT For VIC, TAS, SA, WA For QLD, NT
Incite fire Pty Ltd Incite fire Pty Ltd eFIRE Technologies Pty Ltd
Block Y, Unit 1 Regents Park Estate, Unit 120 - 45 Gilby Road, 25 Jeays Street,
391 Park Road, Regents Park NSW 2143 Mt Waverley VIC 3149 Bowen Hills QLD 4006
P 1300 INCITE (1300 462 483) P +61 3 9544 2211 P +61 7 3252 5366
+61 2 9644 7144
F +61 2 9644 7255 F +61 3 9544 2212 F +61 7 3252 4099
E sales@incitefire.com.au E salesvic@incitefire.com.au E sales@efiretechnologies.com.au