Professional Documents
Culture Documents
701P47655
Prerequisites:
The PWS Tools were developed for all Xerox support PWS
platforms with WinXP using GSN Release 9.2 or higher.
Change Highlights
Significant changes have been made to the PWS Framework
InstallShield application to simplify the product tool installs.
Refer to the PWS Framework Release Notes in the
Documentation folder on this CD for specific product details.
INSTALLATION INSTRUCTIONS
You must uninstall EPC PWS Diagnostic Tools V3.8 and lower
to remove links from the DC8000 and DC7000 Your Product
Folders.
1
2. Select Xerox PWS Diagnostic Tools v3.x. (v3.6, v3.7 or
v3.8). Note: If v3.9 is installed do not uninstall. The DC8000
links have been removed in that version.
3. Select Change/Remove. Select Yes to confirm file deletion.
4. If prompted, select No to All to remove shared files.
5. Select OK when uninstall is completed.
2
a) Select OK to install Microsoft .NET Framework 1.1.
b) If a Software Installation message about Windows Logo
testing appears, select Continue Anyway.
7. The Xerox PWS Framework - InstallShield Wizard checks
the PWS configuration to determine if any product tools are
already installed. You should see the message “No Existing
Products to be Upgraded”.
Note: If the message indicating, “These products were found
and will be upgraded” appears, PWS Framework v4.4 is already
installed. Complete this procedure to add product tools that were
not previously installed.
Note: Some products, like DC250 will include the latest System
SW (bin files) along with the PWS tools. If you do not want to
install the System SW on the PWS due to space limitations,
expand the tree and deselect the System Software options.
8. Select the products you want to install from the list. Select
Next. The product tools will be installed in the order listed.
Install could take up to 10 minutes depending on the
products selected.
9. If prompted, select “Yes, I want to restart my computer
now”
10. Select Finish at InstallShield Wizard Complete screen.
11. Close all applications. Reboot the PWS if not completed in
the previous step.
12. The Xerox PWS Framework installation is complete.
Continue this procedure to complete the remaining
installation requirements.
13. Connect to GSN Bus Station and transfer any downloads
that may be required.
UNINSTALL INSTRUCTIONS
You must remove any previous version of Xerox PWS
Framework prior to installation of new Xerox PWS Framework.
3
6. As required, delete residual PWS Diagnostic Tool shortcuts
from the PWS as follows:
a) Select Start, Programs, Xerox Applications, Xerox
Product Tools, and PWS Diagnostic Tools.
b) Delete the product links for Xerox DC250 PWS
Diagnostic Tool and Xerox 4110_4590 PWS Diagnostic
Tool. The new links will be created during the installation
of PWS Framework.
Uninstall Xerox PWS Framework 4.0.13 (or lower)
The uninstall program for earlier versions of Xerox PWS
Framework was not automated. The InstallShield Wizard will
launch for each product to complete the uninstall.
1. Select Remove. The PWS Framework Uninstall warning will
indicate which product tools will be uninstalled.
2. Select Next. The product tools will be removed in the order
they are listed.
3. If the 4110/4590 tools are installed, the 4110/4590 PWS
InstallShield Wizard screen will open.
a) Select Yes to the question, “Would you like to delete all
saved Machine Data and NVM Access files”.
b) If prompted, select “No to All” to remove shared files.
c) Select Finish at the Uninstall Complete screen.
4. If the DC250 tools are installed, the DC250 PWS
InstallShield Wizard screen will open.
a) Select Yes to the question, “Would you like to delete all
saved Machine Data and NVM Access files”.
b) If prompted, select “No to All” to remove shared files.
c) Select Finish at the Uninstall Complete screen.
5. If the DC5000 tools are installed, the DC5000 PWS
InstallShield Wizard screen will open.
a) Select Yes to the question, “Would you like to delete all
saved Machine Data and NVM Access files”.
b) If prompted, select “No to All” to remove shared files.
c) Select Finish at the Uninstall Complete screen.
6. If the WC_7132 tools are installed, the WC_7132 PWS
InstallShield Wizard screen will open.
a) Select Yes to the question, “Would you like to delete all
saved Machine Data and NVM Access files”.
b) If prompted, select “No to All” to remove shared files.
c) Select Finish at the Uninstall Complete screen.
7. If prompted, at the Xerox PWS Framework Uninstall
Complete screen select “Yes, I want to restart my
computer now”. Then select Finish.
8. As required, delete residual PWS Diagnostic Tool shortcuts
from the PWS as follows:
a) Select Start, Programs, Xerox Applications, Xerox
Product Tools, and PWS Diagnostic Tools.
4
b) Delete the product links for Xerox DC250 PWS
Diagnostic Tool and Xerox 4110_4590 PWS Diagnostics
Tool. The new links will be created during the installation
of PWS Framework.
9. Close the “Add or Remove Program” window. Restart the
PWS if not completed in the previous step.
Acknowledgements
This service information includes combined input from the
Product Development Team (Engineering), Precision Group
Consulting Inc, Systems Operations Group, Field Engineering,
and GKLS (Global Knowledge Language Services) to provide
you with the latest technical information.