You are on page 1of 3

Ideal Sheet Metal Works

Specialist in : Air-conditioning and Ventilation Duct Fabrication Cooling Towers


and all Kinds of Sheet Metal Works.
Off : NL-5, Bldg. No. 27, Flat-2, Sector-11, Silent Valley Association, Nerul, Navi Mumbai – 400 706.

Kind Attn: Mr.Dharma Kotian ( Admn./Mktg.)

Sub: Quotation for Only Labor Work for your Air-conditioning System of Hotel Centre Point at
T.T.C. – 1 Ind. Area, Turbhe, Navi Mumbai – 400 705. India.

We thank you for the kind courtesy extended to us during our site visit and are pleased to submit our most
competitive offer as under:

SCOPE OF WORK

Rate in
Description Qty. Unit
Sr. No. Rs. Amount in Rs.
A EQUIPMENT
Fabrication & Installation of M.S.C-Class Piping per
inch dia per Rmt.
1 Size : 3” dia. 24 Rmt 225 5400
2 Size : 4” dia. 190 Rmt 300 57000
3 Size : 5” dia. 60 Rmt 375 22500
Fabrication &Installation of M.S.Angle ( Size
50x50x6mm) and C-Channel (Size 00x50/75x50)for
4 Pipe, Tower and AHU Supports Structures. 1000 Kg 20 20000
Fabrication & Installation of AHU’s manifold
including 5 nos Butter fly valves, 1 nos 3 way vales,
5 fitting and accessories. 2 Nos 16000 32000

6 Installation of Pumps 4 Nos. 4500 18000

7 Installation of Pressure Gauges 14 Nos 180 2520


8 Installation of Thermometers 10 Nos 180 1800

9 Installation of Auto Air Vent valves 2 Nos 300 600

10 Installation of Gate/Purging Vales 6 Nos 150 900

400
Installation of Water Flow Switch Valve 2 Nos 200

11 Installation of Butter Fly Valves Size : 4” Dia 6 Nos 1500 9000


14400
Installation of Butter Fly Valves Size : 5” Dia 8 Nos 1800

Installation of Rubber below expansion Valves 2 Nos 3000 6000

Installation of Non Return Valves Size : 4” Dia 2 1500 3000


3600
Installation of Non Return Valves Size : 5” Dia 2 1800
3000
Installation of Y-strainer Valves Size : 4” Dia 2 1500
3600
Installation of Y-strainer Valves Size : 5” Dia 2 1800
Chiller and condenser inlet and outlet connection
including flanges and reducers and fittings. 1 lot 7000 7000

AHU – 12000 cfm Assembly and installation. 2 Nos. 15000 30000


50 thick Thermocole Pipe insulation with sand
cement plastering,Chicken Wire mesh and hot 28800
bitumen. 1600 Sq.ft. 18

Aluminum Cladding- 26 /24 gauge 1600 Sq.ft. 10 16000

285520

Total Amount

PAYMENT TERMS FOR:

50% Advance along with order


35% On Progress of Work at site
15% On Completion of jobs

COMPLETION PERIOD

We anticipate that we shall be able to complete the work in approximately 6 t 7 weeks from the date of
work order along with advance.

We request you to place the Installation work on,

M/s. Ideal Sheet Metal Works

We hope the above is in line with your requirement.

Thanking you & looking forward to the pleasure of receiving your valued order, we remain,

Yours truly,

For IDEAL SHEET METAL WORKS.

T.Hussain
9323697092

EXCLUDED WORK AND SERVICES

1. All masonry and builders work such as breaking and making good of
Holes in structures for passage of ducts etc.

2. All carpentry work such as provision of enclosures for system components,


Provision for false ceilings, work involved in concealment and provision of
Wooden frames for grilles and diffusers fixing etc.

3. Scaffolding, return air boxing, false ceiling work, etc.

4. Any other item of work not provided in SCOPE OF WORK.

You might also like