You are on page 1of 1

COMMISSIONING SERVICES DEPARTMENT TP-NG-6460-002-005

Pre-Energization Check List

Project Title: Operating Area:


Main Contractor: T&C Contractor:
Contract No.: Substation:

Sr Status Remark
Items
No Yes No N/A
Categorization of punch list (A, B) should be available and Punch-list
1.
items having Status A must be cleared.
2. All equipment are properly labeled.
All Tests Results’ are available and sent to Data Collector and signed
by the contractor and CSD staff for the following:-
3.1 GIS equipment (HV and EHV).
3.2 Power Transformers.
3.3 MV Switchgear.
3.4 Auxiliaries (AC & DC Panels, Battery & Battery Charger, Aux.
3. Transformers, and RMU).
3.5 SVC, Capacitor banks, and Reactors.
3.6 SAS (HMI, network switches, bay control devices, computers,
GPS).
3.7 SCADA / Close Loop Test.
3.8 Under Ground Cables / Overhead Lines.
3.9 Protection Panels.
All Protection and Measuring CTs are normalized and tightness of CT
4. wiring is checked physically. Temporary shorting links are removed.
Also confirm single point earthing for Each CT circuit.
All VTs are Normalized and tightness of VT wiring is checked
5. physically. VT circuit MCBs are closed and fuses are in place. Also
Check VT HV neutral is solidly grounded.
Check all power supplies to control, Protection, Alarm, and switchgear
6.
etc. are normal.
Check all control and protection devices are normal. No abnormal
7.
relay flag/alarms,
8. Marked up drawings have been submitted.
All protection modifications and final setting corrections are approved
9.
from PED.
All site test results are properly arranged at site with good manner and
10.
colored soft copy of the same have been sent to CSD office.
Approved final setting confirmation have been completed and original
11. copy plus two scan copies of final setting review documents have
been sent to CSD office.
12. Final configurations for all IEDs have been stamped by manufacturers.
13. Final Trip Tests are completed.

CSD Contractor T&C Contractor


Name
Sign.

Archiving System Website: http://AMAS Policy and Procedures Division

You might also like