Professional Documents
Culture Documents
Dimensions bike:
- Height 18 cm
- Length (from the rear wheels to the front wheels) 33 cm
- Width (Mezhuyev rear wheels) 18 cm
5 Getting to the manufacture of the bicycle frame. It turns out the "double".
For 2 frames take a piece of wire 40 cm (for the frames themselves) and 2 pieces of wire 20 cm (for whorls on the
frames)
6 swathes of these pieces teip-ribbon flex small parts in the manner and for the wheels.
Fasten whorl to 40-centimeter basis, departing from the edge of the base 10 centimeters.
7 Edge frame from which we retreated 10 cm also curl up and get these blanks frames.
8 Return to the wheels.
Do axle for the rear wheels of a wire length of 13 cm. Swathes her teip-ribbon.
9.Gotovim white buttons that will hide outside places of fastening of wheels and axles.
For this "schesyvaem" legs of buttons, making them to the maximum flat.
(If you can, you can find white furniture "stub" that close on the furniture attachment)
14 When the wheel well is dry, proceed to mounting frames and steering together.
15 slightly curved frame and fold back the free end of the frame in such a way that they (the frame) can be put on
the axis of the rear wheels.
Make a "fitting"
16 Carefully teip-tape join with the axis of the frame
19 Making "twigs" for baskets, twisting teip-4 tape a piece of wire 40 cm.
To curl their teip-tape in the middle of each other so
26 Fasten the basket to the axis of the bicycle frames and using teip feeds.