Professional Documents
Culture Documents
34
diam. 1mm
10mm
288
284
285 289
10mm
100 99
284
98
34 Make the two side foreyard pin-rails 283 and the two side mainmast pin-rails 284 (on port and starboard sides), according to the measurements
indicated and fit the belay pins 103 and the eyebolts 109. Make the two mizzenmast side pin-rails 285 and fit the five belay pins 103, the
embellishments 287 and the columns 286. On the bridgedeck, fit the five large clump blocks 99 and the four small clump blocks 100, making ten 1mm-
diameter holes to insert the chains of plate 98 (both on port and starboard sides). With parts 286, 288 and 289 build the central rail on the bridgedeck.
Brackets for lifeboats and pin-rails
35
80m
64mm
50
m
286
290
8mm
290
1mm
57
118
270
1mm
291 56
The accommodation ladder and figurehead
37
mm
292 118 276
52
mm
293
52
276 295
1x3mm
mm
52
294 2x3mm
mm
m
93 297
52
17
301 303
108
302
93
304
304
Position lights, brackets for commander’s launch and rigging for the davits
38 108
299
303
305 306 109 109 303
56 306 238
238
308
2x2mm
109 109
305
307
306
308
56
303
108
308
299
109
38 With parts 305, build the two boxes of the position lights 306. Paint the boxes and the central part of the lights red on the port side and
green on the starboard side. Make the rigging for the boat davits 238 with the parts 108, 109, 299, 303 and 308. Glue the boxes 305 with
their lights 306 on the upper gunwale covers 56. Fit the two brackets for the commander’s launch 307 on the roof of the bow wardroom, as well
as the four large eyebolts 109.
Lifeboats
39 287
309 0.6x2mm
287
312
108 315
109
diam. 0.8mm
diam. 0.8mm
109
108
314
39 Cover the hull of the two lifeboats 309 with the basswood battens 310, starting at the keel. Glue these battens in such a way that they
overlap one another to form a clinker-built hull. Paint both of the boats’ hulls ivory, the gunwales black and fit the embellishments 287 and
the very fine brown thread 300. With the battens 311, 312 line the bottom of the boat and make the bow and stern bases 313. Fit and adjust the
seven seats 314. Astern and on the bow, make 0.8mm-diameter holes to fit the eyebolts 109 with the rings 108 and glue the gunwale covers 315.
Lifeboats, continued
40
153
109
109
316 316
317
317
318
290 153 290 318
40 Fit the lifeboats to both sides of the brackets 290 with the help of the parts 317, 318 and 153. In the centre of the brackets 290, glue the
auxiliary brackets 316 with the eyebolts 109 and fit the auxiliary launch 319.
320
319
0.6x2mm
287
41 Cover the hulls of the commander’s launch and auxiliary launch 319 with basswood battens 320, starting with the keel and gluing these battens in
such a way that they overlap one another to represent a clinker-built hull. In the same way, cover the sterns of the launches. Paint the hulls of
both of the launches ivory and the gunwales black. Fit the embellishments 287 and the very fine brown thread 300.
42 Commander’s launch and auxiliary launch, continued
42 With the parts 321, 276, 322, 323, 108
and 109, build the inside of the
324
108
108
276 276
326 325
325
326
323 327 287
325
326
300
15mm
330
diam. 2x106mm
329
328 328
diam. 2x106mm
330
43 Fit the commander’s launch on the roof of the bow wardroom with the help of the parts 328 and 153, and make the two masts 329 as
well as the fastening rings 330 made with the 1mm-diameter brass wire.