You are on page 1of 3

DESIGN AND FABRICATION OF PNEUMATIC AIR ENGINE

A THESIS

Submitted by

P.ALEXANDER(612616410002)

in partial fulfillment for the award of the degree of

MASTER OF ENGINEERING
IN
MANUFACTURING ENGINEERING

THE KAVERY COLLEGE OF ENGINEERING


DEPARTMENT OF AUTOMOBILE ENGINEERING
ANNA UNIVERSITY, CHENNAI
DECEMBER 2018

i
BONAFIDE CERTIFICATE

Certified that this report titled “DESIGN AND FABRICATION OF PNEUMATIC AIR
ENGINE ” is the bonafide work of P.ALEXANDER(612616410002) who carried out the work
under my supervision. Certified further that to the best of my knowledge the work reported here in
does not form part of any other thesis or dissertation on the basis of which a degree or award was
conferred on an earlier occasion on this or any other candidate.

SIGNATURE SIGNATURE
Mr.E.R.SIVAKUMAR.,ME.,(Ph.D.)., Mr.MARUTHAPANDIYAN.,M.E.,(Ph.D.).,
HEAD OF THE DEPARTMENT SUPERVISOR
Associate Professor, Assistant Professor,
Department of Automobile Engineering Department of Mechanical Engineering
The Kavery College Of Engineering , The Kavery College Of Engineering,
Mecheri – 636 453. Mecheri – 636 453.

Submitted for the Project Phase – II Examination held on _______________

INTERNAL EXAMINER EXTERNAL EXAMINER

ii
ACKNOWLEDGEMENT

At this pleasing movement of having successfully completed our project work, I


wish to convey my sincere thanks and gratitude to the management of our college and our
honourable chairman and advisor Prof.Dr.A.K.NATESAN and chairman
Thiru.A.ANBALAGAN who provide all the facilities to us . we express our thanks to our
secretary Prof.S.ELANGOVAN and co-coordinate Mrs.S.REVATIELANGOVAN for
their inspiring support

I extended our sincere thanks to our beloved Dean Prof.S.OBLI for encouraging us
to do this project. I have immense pleasure in expressing my thanks to principal
Prof.Dr.V.KARUPANNAN., for the facility made available for the competition of this
project work

I express my profound sense of our Head of the Department


Mr.E.R.SIVAKUMAR.,ME.,(Ph.D)., Associate professor in Department of Automobile
Engineering , for providing all the facilities and giving permission to proceed i my thesis
work

I would like a great deal to express my thanks to my project guide


Mr.MARUTHAPANDIYAN.,M.E.,(Ph.D.)., Assistant Professor in Department of
Automobile engineering for his support, valuable guidance ad constant encouragement
during the course of the thesis

My sincere thanks to our Friends, Teaching, Non-teaching staff members and the
well-wishers for their constant support at all the time.

iii

You might also like