Professional Documents
Culture Documents
Step 1:
Total shear force from Staad 20 kN
Force due to moment 35 kN
Axial force from Beam 67 kN
102 kN
Step 2:
Dia of bolt (d) 12 mm
Pitch distance 30 mm
Step 3:
Check for Shear Capacity:
From BS 5950 part 1:2000
Clause 6.3.2.1
Shear capacity of bolt Ps
Shear Area
Clause 6.3.2.2
Clause 6.3.2.3
Note:
1.if bolt dia bolt is equal to or lesser than 25mm then hole dia + 1.5mm
2.Greater than 25mm then dia +2mm
(plate/beam/column)
.
Pbs = kbs.d.t.pbs but ≤ 0.5kbs.e.t.pbs From Table 33
where
kbs = 1.0 for bolts in standard holes
55.2 KN 0.7 for bolts in oversized and short slotted holes
0.5 for bolts in long slotted and kidney shaped holes
Hence safe
Table 32
S275 460 N/mm2
S355 550 N/mm2
S460 670 N/mm2
anesh Ganesan
tructural Engineers
ort slotted holes
idney shaped holes