You are on page 1of 7

FORMAT FOR STUDENT PROJECT PROPOSAL FOR THE

42ndSERIES OF STUDENT PROJECT PROGRAMME

STREAM C: PROJECT PROPOSAL FOR STUDENT PROJECT PROGRAMME


(Hand written proposals will not be accepted, please fill all the details in this MS word file as per the
following format. Kindly take a photocopy of completely filled project proposal and Demand Draft for filling
up the Google Forms.)
https://goo.gl/forms/UsilS6ODB0BZL2QC3
For details please Contact email: spp@kscst.iisc.ernet.inand visit http://www.kscst.iisc.ernet.in/spp.html
Telephone : 080 23600978, 080 23341652 Extn.25

1. Name of the College:KLE Dr. M. S. Sheshgiri College of Engineering and


Technology, Belagavi
2. Project Title:
3. Branch: Mechanical
4. Broad Theme / Category (as per KSCST poster):
5. Name(s) of project guide(s):
Name: Prof. M. Sadiq A. Pachapuri
Email ID: pachapuri@gmail.com
Contact No.: 9739320109
6. Name of Team Members (Strictly not more than four students in a batch):
(Please paste the latest passport size photograph
adjacent to your respective names)
1. Name :GIRISH A. KOPPAD
USN No. :2KL15ME120
Email id : girishkoppad1997@gmail.com
Mobile No. :8951603320

2. Name :MAHANTESH S. WAGHMARE


USN No. :2KL16ME410
Email id :
Mobile No. :8088237182

KSCST: Student Project Programme: 42nd Series: 2018 – 2019 – Stream C: Student Project
Proposal 1
3. Name :SUHAIL R. BIDI
USN No. :2KL16ME427
Email id :
Mobile No. :7204348826

4. Name: VENKATESH V. HAMPANNAVAR


USN No.: 2KL16ME430
Email ID: venkateshhampannavar37@gmail.com
Mobile No.: 9035388365

7. Team Leader of the Project :


Name :MAHANTESH S. WAGHMARE
USN No. :2KL16ME410
Email id :
Mobile No. :8088237182
8. Processing Fee Details (Demand Draft should be drawn from Canara Bank /
State Bank of India only):
(processing fee of Rs. 1000/- drawn in favour of Secretary, KSCST, Bangalore
– 12)
Demand Draft No.:
Date: 07.01.2019
Bank Name: CANARA BANK
Note:Please indicate Team Leader name, Project Title and Name of the College on the
backside of the DD.
9. Date of commencement of the Project: JANUARY 2019
10. Probable date of completion of the project: MAY 2019
11. Scope / Objectives of the project:
The basic aim of this system is to reduce accidents on hilly and slippery roads. In
curve roads the other road end of vehicle cannot be seen by driver. At night time
accidents may happens by intensity of head light from opposite side of vehicles. Also,
the light intensity problem occurs on both curved roads and mountain roads;
Thousands of people lose their lives. The solution for this problem is alerting the
driver about the vehicle coming from opposite side. This is done by keeping an
ultrasonic sensor in one side of the road before the curve and keeping a LED light
after the curve, so that if vehicle comes from one end of the curve sensor senses and
LED light glows at the opposite side.

KSCST: Student Project Programme: 42nd Series: 2018 – 2019 – Stream C: Student Project
Proposal 2
12. Methodology:
The purpose of this project is to decrease the number of accidents in curve roads. This
is done by alerting the driver by means of LED light which glows when vehicle comes
from the other side of the curve. The vehicle is detected by the help of Ultrasonic
sensor which is interfaced to the microcontroller Arduino UNO. By this we can save
thousands of lives in the curve roads. The design of this system mainly consists of two
parts; they are hardware design and software design. Hardware design consists of
sensors like ultrasonic sensor, a microcontroller and LED. Ultrasonic sensor uses +5V
DC supply. Its range is from 2 cm to 400 cm. Microcontroller Software design is done
for sensing the vehicle or obstacle and to operate the LED by using Arduino 1.0.5 IDE
tool which is open source software. Programming can be done by using embedded C or
C++. Operating system that we used is windows 8. The LED light here we used is of
green colour and uses maximum +5V DC supply. We have used Microcontroller
(Arduino UNO), LED light and ultrasonic sensor. The sending Ultrasonic sensor has 4
pins. They are +5V VCC, GND, Trig pin and Echo pin. Here Trigger pin is output pin and
Echo pin is input pin. Ultrasonic sensor sends the signal in the form of pulses from
trigger pin. When this signal hit the object it will get reflected back and is received by
the echo pin. From echo the signal is sent to microcontroller Arduino UNO.
Microcontroller Arduino UNO processes this data and operates the LED which is
connected to output pin of the microcontroller Arduino UNO. LED is operated according
to the command i.e.
LED will glow if the signal is reflected back. In the absence of the object the signal will
not reflect back. Hence the LED will not glow. The simple block diagram is shown in
the figure 2. The trig pin of ultrasonic sensor is connected to the digital pin 9 of
microcontroller Arduino UNO and echo pin is connected to digital pin 6. VCC is
connected to +5V and GND is connected to GND of microcontroller Arduino UNO. LED
is connected to pin number 12 of microcontroller Arduino UNO. In the presence of
vehicle the sensor senses the vehicle; the light will glow at the other end of the curve.
In the absence of the vehicle the sensor will not sense and the light will not glow. This
process repeats continuously. We have used frizzing app for simulation and designing
purpose of the circuit. Frizzing is open source software developed by University Of
Applied Sciences Of Potsdam. Using this software we can obtain Circuit sketch,
schematic diagram and PCB design. This software can also use for writing code for
various Arduino boards.
13. Expected Outcome of the project:
The proposed system is designed into a small car model as a prototype to control the
distance between the car and the preceding car and also distance between the front
obstacles and initiates automatic buzzer and LED light indication resulting in slow

KSCST: Student Project Programme: 42nd Series: 2018 – 2019 – Stream C: Student Project
Proposal 3
down of the car by driver. System detects the lane line and driver to avoid accidents
in a significant manner does lane control. Lane detection will ensure that car follows
proper lane discipline for safety purpose. ARDUINO UNO microcontroller is used which
eliminates the rounding problems and resulting in near perfect distance reading. The
alert mechanism used in system will facilitate the vehicle driver at any unusual
movement of the vehicle. So, if this system is used in fully automate cars with
adaptive cruise control the overall safety will be further enhanced.
14. Application of the project:
SOCIETAL - IT WOULD HELP THE SOCIETY FOR DECREASING ROAD ACCIDENTS.
15. Is the project proposed relevant to the Industry or Institution? :
Yes / No
NO

If Yes, Please provide details of the Industry / institution and contact


details:
AUTOMOTIVE INDUSTRY / HEALTHCARE INDUSTRY

(Note: Preference will be given to those projects relevant to the industry / institution.
Hence be specific in giving detailed information). Is the industry extending support -
technology / funds / use the final product, please specify.
16. In case of fabrication work in the project, an engineering drawing with
dimensions / detailed design calculations (approximately) of the machine /
device should be attached to the proposal.
NO FABRICATION WORK IS NEEDED IN THIS PROJECT, ONLY ASSEMBLY
17. Can the product or process developed in the project be taken up for filing a
Patent?
Yes / No. : NO

If Yes, you may contact Patent Information Centre of KSCST


for more details
Karnataka State Council for Science and Technology
Indian Institute of Science Campus, Bengaluru - 560012
Tel: +91-080-2334 1652 / 2334 8848 / 2334 8849
Email : patent@kscst.iisc.ernet.in
18. Budget details (break-up details should be given) :
Budget Amount
a) Materials / Consumables 7000.00
b) Labor 500.00

KSCST: Student Project Programme: 42nd Series: 2018 – 2019 – Stream C: Student Project
Proposal 4
c) Travel 1000.00
d) Report 500.00
e) Miscellaneous 500.00
Total 9500.00
19. Any other technical details (Please specify):
20. SPP Coordinator (Identified by the college):
(Note: KSCST will be providing financial and technical support to student projects and
these projects will be evaluated by experts in identified nodal centres. There will be
interaction between students and experts to fine-tune the project in the nodal centre.
The project recommended by experts will be selected for state level Seminar and
exhibition. Hence the role of SPP Co-ordinator is very important to KSCST regarding
receipt of project sanctioned, amount released to the College, informing the
concerned project guides regarding evaluation of projects and sending the softcopy
and hardcopy of the reports to KSCST.
Further interacting with the Principal of the institution in submission of statement of
expenditure, etc. Hence it is requested that the Principal of the institution to nominate
the SPP Co-ordinator for smooth functioning of educational Programmes of KSCST.)

Name :Dr. Umesh B. Deshannavar


Email ID : deshannavar@gmail.com
Contact No.: 9740935126
21.

(Name &Signature of Project Guide with (Name & Signature of HOD with
Seal) Seal)
Email id: sapachapuri@klescet.ac.in Email id: sfpatil@klescet.ac.in
Contact No.: 9739320109 Contact No.: 9448155784

DECLARATION
(From Project Students)

We, the project team hereby declare that the details enclosed in the project proposal are true
and correct to the best of our knowledge and belief and we undertake to inform KSCST of any
changes therein in the project tile, students name will be intimated immediately. In case any
of the above information is found to be false or untrue or misleading, we are aware that we
may be held liable for it. We hereby authorize sharing of the project information with this

KSCST: Student Project Programme: 42nd Series: 2018 – 2019 – Stream C: Student Project
Proposal 5
project proposal with the Karnataka State Council for Science and Technology, Bangalore.
We are aware that the project team has to exhibit / demonstrate the project in the nodal
centre and interact regarding project with the experts and to exhibit the project in the State
Level Seminar and Exhibition (if selected). If the student team fails to attend the evaluation in
nodal centre or fails to attend the State Level Seminar and Exhibition, the supported project
amount will be returned back to KSCST.
We also hereby, enclose the endorsement form to KSCST, Bengaluru.

Name of the students Signature with date


1. GIRISH A. KOPPAD
2. MAHANTESH S. WAGHMARE
3. SUHAIL R. BIDI
4. VENKATESH V. HAMPANNAVAR

ENDORSEMENT
(From College, endorsement to be taken in the institution / Department Letter
head)

This is to certify that 1) Mr. Girish A. Koppad 2) Mr. Mahantesh S. Waghmare


3) Mr. Suhail R. Bidi 4) Mr. Venkatesh V. Hampannavar are bonafide student(s) of
Department of Mechanical Engineering, in the degree program of our institution. If the project
proposal submitted by these students under the 42 nd Series of Student Project Programme is
selected by KSCST, we will provide the requisite laboratory / Computer / infrastructure support
in our college / Institution. Further, we also take necessary steps to see that the project team

KSCST: Student Project Programme: 42nd Series: 2018 – 2019 – Stream C: Student Project
Proposal 6
will exhibit / demonstrate their project in the nodal centre and in the State Level Seminar and
Exhibition (if selected). If the student team fails to send the completed project report or fails
to attend the evaluation in nodal centre or fails to attend the State Level Seminar and
Exhibition, the supported project amount will be returned back to KSCST.

Name & Signature of (Signature of HOD with (Signature of the Principal


Project Guide with Seal) Seal) with Seal)
Email id: Email id: Email id:
sapachapuri@klescet.ac. sfpatil@klescet.ac.in principal@klescet.ac.in
in
Contact No.: Contact No.: Contact No.: 9448221813
9739320109 9448155784

KSCST: Student Project Programme: 42nd Series: 2018 – 2019 – Stream C: Student Project
Proposal 7

You might also like