You are on page 1of 4

ERL

Eff
nt
e 3

ga

ici
Ele

nte
Easy to Use

Trip Circuit Supervision Relay XR351

Description Features
Type XR relay has been developed for specific applications, and • Low burden
suitable for use with type AR relay range. It is an electro
mechanical relay with a consistent positive action, a long service • Versatile design
life and complying with the appropriate requirements of IEC • Preclose supervision
60255. The XR351 has three attracted armature elements. It
incorporates a time delay on de energisation, to keep the relay in • Consistent positive action
an operated condition, during temporary reduction in the battery
voltage • Epsilon drawout case

Applications
• Supervision and ensuring the integrity of the trip circuit of a
breaker

• Continuous supervision, during both, open and closed


position of circuit breaker
XR 351

• Preclosing supervision to prevent circuit breaker from ERL Item code: XR_09448
Sl No: HR 1010534
Rating 110V DC
being closed where the trip relay has not been reset

Trip Circuit Supervision Relay XR351


Wiring Diagram

LOOKING ON FRONT OF RELAY

4 3
6 5
R3 R4
23
8 7
B
10 9
24

27
R5 R6
19
C
A
20 28

R2 R1

Typical Wiring Diagram

SCHEMATIC DIAGRAM
CONTACTS (2M2B) SHOWN UNDER DE-ENERGISED CONDITION
TRIP SUPPLY

86 52a
TC

52b

19 20 23 24
R5 R3
R6 R4
ALARM SUPPLY

A B
R2 R1
27 C 28

8 10

7 9

4 6

3 5
R DEPENDS UPON TRIP & ALARM SUPPLY VOLTAGE
Environmental
Technical Information Temperature IEC 60068- 2- 1 & 2
Storage - 250 C to + 700 C
Rated Voltage, Vn 30V, 48V, 110V, 220V DC Operating - 100 C to + 550 C
Temperature IEC60068-2-1&2 Humidity IEC 60068-2-3
Operating Range 80% to 120% of Vn 56 days at 95% RH and 400 C
Reset Time 400 ms when supply is
switched form Vn to off Vibration IEC 60255-21-1
Burden Relay meets the requirements vibration of class 1 for response and
endurance.
Trip Circuit Condition
Rated Alarm Shock and Bump IEC 60255-21-2
Voltage Circuit Relay meets the requirements with respect to shock & bump testing
C.B. Open C.B. Closed
for class 1 severity.
30V DC 1W 1W 2W
Transient Over voltage IEC 60255-5
5KV 1.2/50µs 0.5 joules between all terminals and earth or
48V DC 1W 1W 2W between any two terminals without damage or flashover.

110V DC 1W 2W 4W Insulation IEC 60255-5


2KV rms for 1 minute between all terminals and earth.
220V DC 2W 4W 9W 1KV rms for 1 minute across normally open contacts

Thermal Withstand 1.2Vn continuously Operational / Mechanical life


The relays will withstand in excess of 10,000 operations, within the
maximum contact loading specified, at a rate of 600 operations per
Indication hour.
Hand reset flag

Contact Arrangement
Alarm output, 4 in any combination of normally open and normally
closed. Pre close supervision, 1 normally open.

Contact Rating
Make and carry continuously
1250VA AC or 1250W DC with limits of 660V and 5A

Make and carry for 3 seconds


7500VA AC or 7500W DC with limits of 660V and 30A

Break
1250VA AC or 100W DC (resistive) or 50W (inductive) (L/R=0.04)
DC with limits of 250V and 5A
Cutout Details Ordering Information
+0.5
-0 • Rated voltage
Ø4 - 4 HOLES • Contact arrangement

Rating Coil Resistance Resistors value in Ohms


V DC in Ohms
A B C R1 R2 R3 R4 R5 R6

30 400 400 450 100 100

48 400 400 1572 350 350

110 4800 4800 1572 2000 2300 2300

220 4800 4800 1572 2000 3100 2300 7000 2300 7000

These resistors are supplied loose with the relays for non drawout
case. It is important to ensure that the resistors are correctly
connected.

Qualification
DIMENSION
CASE SIZE W X Y ISO 9001 – 2008
E4 9.50 97.00 78.00

Note :
1. All dimensions are in mm
2. All dimensions are measured equidistant from centre line
3. Maximum depth of equipment inside panel : 225mm

The policy of EASUN REYROLLE is one of continuous improvement and development. The company therefore reserves the right to supply equipment which may differ slightly
from that described and illustrated in the publication.

ERL Group Corporate Office


#389, “Rasukumaki”, Hulimavu, Begur Hobli, Bannerghatta Road, Bangalore – 560 076, India
Tel: +91 80 6717 7000 Fax: +91 80 6717 7002 Email: cenmarket@easunreyrolle.net

Global Marketing Offices


Germany, Canada, Hong Kong, Thailand, South Africa, UAE, Brazil, Peru & USA

Global Manufacturing Centers


FACT/XR/09-10/REV1.0

India, Canada & Germany

Global Technology Centers


India, Canada & Germany

Marketing Offices in India


Bangalore Chennai Kolkata
Tel: +91 80 6717 7000/01 Bhopal Tel: +91 44 2434 6425/7608 Tel: +91 33 2284 8320
Fax: +91 80 6717 7002 Fax: +91 755 2684221 Fax: +91 44 2434 6435 Fax: +91 33 2284 8326
Email: cenmarket@easunreyrolle.net Email: bhopal@easunreyrolle.net Email: chennai@easunreyrolle.net Email: kolkata@easunreyrolle.net

Mumbai Noida
Tel: +91 22 2285 54415/ 2202 2270 Tel: +91 120 2405 741/42/43
Fax: +91 22 2285 5703
Email: mumbai@easunreyrolle.net
Fax: +91 120 2405 744
Email: noida@easunreyrolle.net
Secunderabad
Tel: +91 40 2781 7847
Email: hyderabad@easunreyrolle.net ERL
www.easunreyrolle.com

You might also like