Professional Documents
Culture Documents
1.
What about the stability of system in
A. system is stable
B. unstable
C. stable at 0.4
D. cant say
Answer: Option A
Explanation:
ROC include the unit circle hence it is stable.
View Answer Discuss in Forum Workspace Report
B. y(n) + y(n - 1)
C. y(n) = x(n)
B. 100
C. 50
D. 20
Answer: Option B
Explanation:
Energy density spectrum = |G(f)|2 = |10|2 = 100.
View Answer Discuss in Forum Workspace Report
4. Consider Pole zero diagram as shown, If two Poles are moved in opposite direction towards ω
= /2 and -/2, the filter will be
C. remains same
D. change to LPF
Answer: Option C
Explanation:
But still we will get the same response, zero are at same position.
View Answer Discuss in Forum Workspace Report
5. In an ac circuit the fundamental component of current wave lags the corresponding voltage wave
by 20°. The third harmonic component of current wave lags the corresponding voltage by an
angle.
A. less than 20°
C. equal to 20°
6.
If and A + B is
A.
B.
C.
D.
Answer: Option A
Explanation:
Add elements individually.
View Answer Discuss in Forum Workspace Report
7. A voltage V(t) is a Gaussian ergodic random process with a mean of zero and a variance of 4
volt2. If it is measured by a dc meter. The reading will be
A. 0
B. 4
C. 2
D. 2
Answer: Option A
Explanation:
DC meter reads mean value.
View Answer Discuss in Forum Workspace Report
A. True
B. False
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. e-st F(s)
C.
D.
Answer: Option B
Explanation:
A linear system is one in which the relationship between input and output is linear.
All linear system possess the property of superposition i.e., if input u1 gives output y1 and
input u2 gives outputy2 then input u1 + u2 will give output y1 + y2.
Superposition implies homogencity i.e., if input u gives output y, then input ku gives
output ky where k is a rational number.
In general a system is linear if a transformation T satisfies the relation
T(u1 + βu2) = T(u1) + βT(u2)
where and β are constant.
View Answer Discuss in Forum Workspace Report
11. The z-transform of a particular signal is given
where
Include unity circle and exterior of circle hence x(z) will be stable, causal.
View Answer Discuss in Forum Workspace Report
12. The system with given pole-zero diagram is
A. casual
B. non-casual
C. both sided
D. not-possible
Answer: Option D
Explanation:
Because no.of zero is more than Pole, therefore when you find transfer function.
Numerator power will higher than denominator, and such transfer functions is not realizable.
View Answer Discuss in Forum Workspace Report
13. A pole zero pattern of a certain filter is shown in figure. This filter must be
A. LPF
B. BFP
C. HPF
D. APF
Answer: Option D
Explanation:
In transfer function, no of zeros = no. of poles, hence it is all pass fliter.
View Answer Discuss in Forum Workspace Report
14. If transfer function of a system is H(z) = 6 + z-1 + z-2 then system is
A. minimun phase
B. maximum phase
C. mixed phase
D. none
Answer: Option A
Explanation:
H(z) = 6 + z-1 - z-2, solve it by considering H(z) = 0 z = 1/3, -1/2 in H(z) only numerator.
Hence z = 1/3, - 1/2 will be zero, and if zero lies inside the unit circle, system will be of minimum
phase.
View Answer Discuss in Forum Workspace Report
15.
The period of the function cos is
A.
B. 8s
C. 4s
D.
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
16. Let x(t) and y(t) with F.T. x(f) and y(f) respectively be related as shown in figure
Then y(f) is
A.
B.
C. -X(f/2)ej2f
D. -X(f/2)e- j2f
Answer: Option B
Explanation:
By applying time shifting and scaling property.
View Answer Discuss in Forum Workspace Report
C. y[n] = x2[n]
B.
C.
D.
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
19.
B. a > 0
C. a < 0
D. a ≤ 0
Answer: Option C
Explanation:
For stable system exponential must be -ve so that a < 0.
View Answer Discuss in Forum Workspace Report
20.
If I (s) , initial value of i(t) is
A. 5A
B. 12.5 A
C. 0.05 A
D. 1250 A
Answer: Option A
Explanation:
.
View Answer Discuss in Forum Workspace Report
21.
If then for this to be true x(t) is
A. exp (j2 f/t)
If
.
View Answer Discuss in Forum Workspace Report
A. yk - 0.5 yk - 1 - 0.25 yk - 2 = uk
B. yk + 0.5 yk - 1 - 0.25 yk - 2 = uk
C. yk - 0.5 yk - 1 + 0.25 yk - 2 = uk
D. yk + 0.5 yk - 1 + 0.25 yk - 2 = uk
Answer: Option C
Explanation:
uk + 0.5 yk - 1 - 0.25 yk - 2 = yk.
View Answer Discuss in Forum Workspace Report
23. The analog signal m(t) is given below m(t) = 4 cos 100 t + 8 sin 200 t + cos 300 t, the Nyquist
sampling rate will be
A. 1/100
B. 1/200
C. 1/300
D. 1/600
Answer: Option C
Explanation:
m (t) = 4 cos 100 t + 8 sin 200 t + cos 300 t
Nyquist sampling freq fs ≤ 2fm where fm is highest frequency component in given signal and
highest fm in 3rdpart
2fmt = 300 t
fm = 150 Hz
fs = 2 x 150 300 Hz
.
View Answer Discuss in Forum Workspace Report
B. z < a
C. |z| > a
D. |z| < a
Answer: Option C
Explanation:
The simplest method to find the ROC. Put denominator to greater than zero.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option C
Explanation:
A.
B.
C.
D.
Answer: Option A
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
where is dummy variable for t.
View Answer Discuss in Forum Workspace Report
28.
If
A. - 12
B. 12
C. 20
D. - 20
Answer: Option A
Explanation:
det.|A| = 3(8 - 12) = - 12.
View Answer Discuss in Forum Workspace Report
A.
B. 1
C. U(t)
D.
Answer: Option A
Explanation:
By duality Property.
View Answer Discuss in Forum Workspace Report
30.
If I (s) , the final value of i(t) is
A. 5A
B. 12.5 A
C. 0.05 A
D. 1250 A
Answer: Option B
Explanation:
32. A voltage wave having 5% fifth harmonic content is applied to a series RC circuit. The
percentage fifth harmonic content in the current wave will be
A. 5%
B. more than 5%
C. less than 5%
33.
C. A is true, R is false
D. A is false, R is true
Answer: Option A
Explanation:
Initial value theorem when applied to I(s) gives 5 A.
View Answer Discuss in Forum Workspace Report
34. δ(t) is a
A. energy signal
B. power signal
D. none
Answer: Option B
Explanation:
Because Unit step is a Power signal. So By trignometric identifies d(t) also power.
.
View Answer Discuss in Forum Workspace Report
35. The analog signal given below is sampled by 600 samples per second for m(t) = 3 sin 500 t + 2
sin 700 tthen folding frequency is
A. 500 Hz
B. 700 Hz
C. 300 Hz
D. 1400 Hz
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
36. The signal defined by the equations f(t) = 0 for t < 0, f(t) = E for 0 ≤ t ≤ a and f(t) = 0 for t > a is
A. a step function
B. a pulse function
37.
Inverse Laplace transform of is
A. 2 exp (- 2.5 t) cosh (0.5 t)
B. exp (- 2 t) + exp (- 3 t)
38. Two function g1(t) and g2(t) with correlation of 6 has average power of 4 and 5 respectively. The
power of g1(t) + g2(t) is
A. 9
B. 21
C. 3
D. 15
Answer: Option B
Explanation:
Power of two correlated signal is P = P1 + P2 +2R1, 2(t).
View Answer Discuss in Forum Workspace Report
39. A box has 4 white and 3 red balls. Two balls are taken out in succession. What is the probability
that both are white?
A.
B.
C.
D.
Answer: Option C
Explanation:
The probability that first ball is white is and the probability the second ball is white is . The
B. False
Answer: Option B
Explanation:
Z transform is a linear operation.
View Answer Discuss in Forum Workspace Report
B. power signal
D. insufficient data
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
43.
If , the terms in f(t) will have
A. e and e
-t -2t
B. et and e2t
B. pure a.c
45. As per time displacement theorem in Laplace transformation, displacement in the time domain
by T becomes
A. division by s in the s domain
47.
If , the coefficient of term e-t in f(t) will be
A. 1
B. 0
C. 0.5
D. 2/3
Answer: Option D
Explanation:
Coefficient of e-t = .
View Answer Discuss in Forum Workspace Report
B. a parabola
C. a ramp
D. a doublet
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. A eas
C. A a e-as
D. Aa eas
Answer: Option A
Explanation:
It is an impulse having area A and originating at t = a.
View Answer Discuss in Forum Workspace Report
50.
B.
C. 27
D. ∞
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
1. If f=0
A. XL = 0 and XC = 0
B. XL = ∞, XC = ∞
C. XL = 0 and XC = ∞
D. XL = ∞ and XC = 0
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
2. An ac circuit has an impedance of (2 - j 9) Ω for third harmonic. The impedance for fundamental
is
A. 6 - j 27 Ω
B.
C. 2 - j 27 Ω
D. 2 - j 3 Ω
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
C. expectation
D. chebyshev inequality
Answer: Option D
Explanation:
Because Variance, standard Deviation, Expectation are related to each other.
View Answer Discuss in Forum Workspace Report
5. The sampling of a function f(l) = sin 2f0t starts from a zero crossing. The signal can be detected
if sampling time T is
A.
B.
C.
D.
Answer: Option C
Explanation:
Because fs ≤ 2f0, Ts ≤ .
View Answer Discuss in Forum Workspace Report
B. e-as F(s)
C. - eas F(s)
D. - e -as F(s)
Answer: Option B
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
C. A is true, R is false
D. A is false, R is true
Answer: Option D
Explanation:
£[af1(t) +bf2(t)] = aF1(s) + bF2(s) Hence A is wrong.
View Answer Discuss in Forum Workspace Report
B. 1/s
C. s
D. 1/s2
Answer: Option A
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
C. A is true, R is false
D. A is false, R is true
Answer: Option C
Explanation:
A.
B.
C.
D.
Answer: Option C
Explanation:
View Answer Discuss in Forum Workspace Report
11. The trignometric Fourier series of an even function of time does not have
A. dc term
B. cosine term
C. sine term
12. Z transformer of
A. aX(z) - bY(z)
B. aX(z) + bY(z)
B. False
Answer: Option B
Explanation:
It is not symmetrical about x - axis.
View Answer Discuss in Forum Workspace Report
14. Assertion (A): If a wave v = A1 + A2 sin ωt is applied to a pure capacitor the current wave is
i = A3 sin(ωt + 90°)
Reason (R): A capacitor presents infinite impedance to dc.
A. Both A and R are correct and R is correct explanation of A
D. A is false, R is true
Answer: Option A
Explanation:
Since capacitor presents infinite impedance to dc, voltage component A 1, does not cause any
current.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option B
Explanation:
It is not a unique set.
View Answer Discuss in Forum Workspace Report
B. real
C. conjugate Unsymmetric
D. conjugate symmetric
Answer: Option B
Explanation:
F.T. of conjugate symmetric function is always real.
View Answer Discuss in Forum Workspace Report
C. y[n] = x[n/2]
D. all
Answer: Option B
Explanation:
For time invariant system
y(n, k) = y(n - k), where y(n, k) mean shift the input by n - k, while y(n - k) mean change all the n
(a) y[n] = x[2n]
⇒ y(n, k) = x[2n - k]
y(n - k) = x[2(n - k)]
y(n, k) ≠ y(n - k) Time variant
(b) y[n] = x[n] x[n - 1]
y[n, k] = x[n - k] x[n - k - 1]
y[n - k] = x[n - k] x[n - k - 1]
y[n, k] = x[n - k] Time Invariant
⇒ y[n - k]
y[n, k] ≠ y[n - k] Time variant.
View Answer Discuss in Forum Workspace Report
18. The Fourier series representation of a periodic current (2 + 62 cos ωt +48 sin 2ωt) A. The
effective value is
A. (2 + 6 + 24) A
B. 8 A
C. 6 A
D. 2 A
Answer: Option B
Explanation:
I =(22 + 62 + 24)0.5 = 64 = 8.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
and E.S.D. of g(t) = |G(f)|2
20.
If , then x(n) series has
A. alternates 0
B. alternate 1
C. alternate 2
D. alternate -1s
Answer: Option A
Explanation:
Use power series method to solve it.
View Answer Discuss in Forum Workspace Report
21. Assertion (A): Intergal of a unit step function is a ramp of slope unity.
Reason (R): If
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option C
Explanation:
22.
If then, f(0+) and f(∞) are given by
A. 0 and 2
B. 2, 0
C. 0, 1
D.
,0
Answer: Option B
Explanation:
Use initial and final value theorems.
View Answer Discuss in Forum Workspace Report
23. The signal define by the equations u(t - a) = 0 for t < a and u(t - a) = 1 for t ≥ a is
A. a unit step function
C. a pulse function
A. yk = uk + 0.5 yk - 2
B. yk = uk + 0.5 uk - 2
C. yk = uk - 0.5 yk - 2
D. yk = uk - 0.5 uk - 2
Answer: Option A
Explanation:
yk has two unit delays and then a multiplier of 0.5 before being fedback.
View Answer Discuss in Forum Workspace Report
25. The Laplace transform of the waveform shown in the below figure is
A.
B.
C.
D.
Answer: Option D
Explanation:
x(t) = ∪(t - 1) + ∪(t - 2) - 2∪(t - 3).
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D. none of these
Answer: Option A
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
27. The impulse response of discrete time system is x[n] = (4)n ∪[3 - n], the system is
A. casual
B. stable
28.
B. -/2
C. -j/2
D. /2
Answer: Option D
Explanation:
A.
B.
C.
D.
Answer: Option A
Explanation:
Fourier coefficient
.
View Answer Discuss in Forum Workspace Report
30.
The inverse Laplace transform of is
A. t2 e-t
B.
C. te-t
D.
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
31. A voltage wave v = 10 + 20 sin ωt + 7.5 sin 3 ω(t) is applied to a series combination of two
elements. The current is i = 5 sin (ωt + 20°) + 1.5 sin (3ωt + 10°). The elements are
A. R and C
B. R and L
C. L and C
D. both inductances
Answer: Option A
Explanation:
DC component is absent in current and current is leading the voltage. Hence R and C.
View Answer Discuss in Forum Workspace Report
B. 1
C. e-as
D. eas
Answer: Option C
Explanation:
It is an impulse originating at t = a.
View Answer Discuss in Forum Workspace Report
B. convolution of any arbitary function x(t) and an impulse is the original function itself
the sum of two impulses at same location is the impulse with the strength equal to the
C.
summation of individual strengths.
D. none of these.
Answer: Option D
Explanation:
Singularity function is discontinuous at origin like ∪(t), δ(t).
View Answer Discuss in Forum Workspace Report
34. Magnitude Plot of a Composite signal x(t) = e2jt + e3jt is
A. half wave rectified sinusoidal
35.
The final value of is
A. ∞
B. 2
C. 1
D. zero
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. 2e-t2
C.
D.
Answer: Option A
Explanation:
Apply Differential Property of F.T
Note that this is true only for e-t2
37.
If F(s) is the Laplace transform of f(t) then Laplace transform of
A.
B. sFU(s)
C. s2F(s)
D.
Answer: Option B
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
Initial conditions are taken into account.
View Answer Discuss in Forum Workspace Report
39. An ac sinusoidal wave has an rms value of 10 V. The peak to peak value is
A. 10 V
B. 0 V
C. 14.14 V
D. 28.28 V
Answer: Option D
Explanation:
B. 5 V
C. 10 V
D. 6.12 V
Answer: Option D
Explanation:
41.
B. 2
C. 4
D. 4/3
Answer: Option A
Explanation:
.
View Answer Discuss in Forum Workspace Report
42.
The Laplace transform of a vlotage across a capacitor is Vc (s) = . If capacitor is 0.5 F,
The current through capacitor at t = 0+ is
A. 0A
B. 2 A
C. 0.5 A
D. 1 A
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
43.
B. 3
C. 9
D. 0
Answer: Option D
Explanation:
Because t = 3 is lies out of integral limit.
View Answer Discuss in Forum Workspace Report
.
View Answer Discuss in Forum Workspace Report
45. For the function u(t - a) = 0 for t < a and u(t - a) = 1 fort ≥ a, the Laplace transform is
A.
B.
C.
D.
Answer: Option B
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
Laplace transform is
Reason (R):
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option A
Explanation:
A follows from the theorem in R.
View Answer Discuss in Forum Workspace Report
47. The energy of constant amplitude complex valued exponential sequence is ...
A. A2
B. ∞
C. 1
D. 0
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
48.
B. 1
C. infinite
D. undefined
Answer: Option A
Explanation:
49.
Assertion (A): If
Reason (R):
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option A
Explanation:
.
View Answer Discuss in Forum Workspace Report
50. A rectangular pulse train s(t) is shown in figure is convolved with the signal cos2(4 x 103t). The
convolved signal will be a
A. DC
B. 12 kHZ sinusoidal
C. 8 kHZ sinusoidal
D. 14 kHZ sinusoidal
Answer: Option D
Explanation:
First find the Fourier series of given pulse that is
C. distortionless Amplifier
C. sin 3n
D. all
Answer: Option C
Explanation:
In Discrete time signal irrational function cannot be periodic, frequency must be rational.
Hence only (c) is periodic.
sin 3n = sin 3(n + N) ⇒ for Periodic 3N = 2K
.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
It is differentiation property.
View Answer Discuss in Forum Workspace Report
5.
The inverse Laplace transform of
A. eat
B. -eat
C. 1 - eat
D. -1 + eat
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
6. The function f(t) in the given figure will have its Laplace transform as
A.
B.
C.
D.
Answer: Option D
Explanation:
The function is sum of three functions , i.e., a ramp of slpoe 1 originating at t = 0, a ramp of slpoe
-1
Originating at t = 1 and a negative unit step function originating at t = 2, i.e.,
f(t) = tu(t) - t u(t -1) = u(-2)
.
View Answer Discuss in Forum Workspace Report
7. The joint probability function of two discrete random variable X and Y is given by
x = 0, 2, y = 2, 3 then E(X) =
A.
B.
C.
D.
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
8. The effective value of the waveform in the given figure is
A. 5
B. 2.5
C. 2.5
D. 5.0
Answer: Option D
Explanation:
.
View Answer Discuss in Forum Workspace Report
A.
B.
C. y(t) = x(t - 1)
D. y(t) = ex(t)
Answer: Option D
Explanation:
Output depend upon only present input while in other cases depend upon past input also
A.
B.
C.
D.
Answer: Option C
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
B. initial charge
D. initial voltage
Answer: Option B
Explanation:
Intergal of current is charge.
View Answer Discuss in Forum Workspace Report
A. yk = 0.5 uk - 2 - uk - 0.25 yk - 1
B. yk = 0.5 uk - 1 - uk - 0.25 yk - 1
C. yk = 0.5 uk - uk - 1 - 0.25 yk - 1
D. yk = 0.5 uk - 1 - uk - 1 - 0.25 yk - 1
Answer: Option A
Explanation:
uk has two unit delays and a mltiplier of 0.5, yk has a unit delay and a muliplier of 0.25 .
View Answer Discuss in Forum Workspace Report
13.
The signal is
A. periodic for t > 0
B. non-periodic
D. depends on t
Answer: Option B
Explanation:
To because Periodic such signal = rational number, where T1 and T2 is period of individual
signal.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option B
Explanation:
A is n x n matrix.
View Answer Discuss in Forum Workspace Report
15.
A.
B. z = 1 and z = 3
C.
D. z = -1 and z = -3
Answer: Option A
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. y(n) = x(n/2)
D. all
Answer: Option A
Explanation:
Because in (a) if you put n = 1 then y(n) = x(2) which shows output depend upon future value.
While in (b), (c) input converted to Past or Present and past.
Note that n cannot be in fraction so for x(n/2) you will put n = 2, 4, ... etc. not 1, 3, 5 .... etc.
View Answer Discuss in Forum Workspace Report
B. realizable
C. depends upon B
18. The current in a circuit with 10 Ω resistance is i = 3 + 4 sin (100 t + 45°) + 4 sin (300 t + 60°) A.
The rms current and power dissipated are
A. 41 A and 410 W
B. 35 A and 350 W
C. 5 A and 250 W
D. 11 A and 1210 W
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
20. The function x(t) is shown in the given figure. Even and odd parts of a unit step function ∪ (t) are
respectively,
A.
B.
C.
D.
Answer: Option A
Explanation:
21. A signal x(n) = sin(ω0n + φ) is the input to a linear time invariant system having a frequency
response H(ejω) If the O/P of the system is Ax(n -n0), then the general form of H(ejω) will be
A. - n0ω0 + β for any arbitrary real β
D. - n0ω0 + φ
Answer: Option B
Explanation:
y(n) = A x(n - n0)
⇒ A sin (ω0(n - n0) + Φ)
⇒ A sin (ω0 n - n0ω0 + Φ) and ∠4 (ejω) is - n0ω0 + 2k.
View Answer Discuss in Forum Workspace Report
B. 2G'(f)
C.
D. -jf F(f)
Answer: Option A
Explanation:
It is duality property of differentiation.
View Answer Discuss in Forum Workspace Report
23.
A casual system having the transfer function is excited with 10 ∪(t). The time at
which the output reaches 99% of its steady-state value is
A. 2.7 sec
B. 2.5 sec
C. 2.3 sec
D. 2.1 sec
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. [- J2.5 1 J2.5]
C. [- J5 J2 0]
D. [- x 1 4]
Answer: Option C
Explanation:
Conjugate ant-symmetric part
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
27. DTFT (Discrete time Fourier transform) of x[n] = an∪[n] for -1 < a < + 1.
A.
B.
C.
D.
Answer: Option A
Explanation:
.
View Answer Discuss in Forum Workspace Report
28.
The z- transform of a systerm is If the ROC is |z| < 0.2, then the impluse
response of the system is
A. (0.2)n ∪[n]
B. (0.2)n ∪[- n - 1]
C. -(0.2)n ∪[n]
D. -(0.2)n ∪[- n - 1]
Answer: Option D
Explanation:
ROC is |z| < 0.2, which shows x(n) must be non-causal, therefore sequence must be left
handed.
But if H(z) become then ROC become |z| < 0.2 and inverse z-transform
C. |z| < 4
D. |z| > 3
Answer: Option B
Explanation:
x[n] = (3)n ∪(n) + (4)n ∪(- n - 1)
B. False
Answer: Option B
Explanation:
It is an impulse function occuring at t = b.
View Answer Discuss in Forum Workspace Report
31. A signal is sampled at Nyquist rate fs = 2f0. The function can be recovered from its samples only.
If it is a
A. Periodic square wave of fundamental frequency f0
32. A voltage wave is v = 50 sin ωt. Its average value calculated over full one cycle is
A. zero
B. 35.36 V
C. 31.85 V
33. If f1 (t) and f2 (f) are two functions of time and a and b are constants, then
A. L [af1(t) + bf2(t)] = aF1(s) + bF2(s)
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
A.
B.
C.
D.
Answer: Option A
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. 2f F(f)
C. F'(f)
D. None
Answer: Option A
Explanation:
36. A voltage wave is i = 100 sin (ωt). Its average value calculated over one half cycle is
A. zero
B. 70.72 V
C. 63.70 V
.
View Answer Discuss in Forum Workspace Report
37. In the given figure 15.5 show a discrete time system consisting of a unit delay system, a
multiplier and a summer, such that y(k) = x(k - 1) + 0.5 x(k). This
system
A. is linear
B. is non linear
D. impossible to judge
Answer: Option A
Explanation:
All the elements are linear.
View Answer Discuss in Forum Workspace Report
38. An RLC series circuit has a variable inductance. The value of L for resonance conditions at
fundamental frequency is 0.18 H. For resonance conditions at third harmonic frequency the
value of inductance is
A. 0.54 H
B. 0.06 H
C. 0.02 H
D. 1.62 H
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. 0 ≤ P ≤ 1
C. If A and B are mitual exclusive then P(A + B) = P(A) + P(B)
D. P(A) = 1 - P(A)
Answer: Option A
Explanation:
P(A) + P(B) = 1.
View Answer Discuss in Forum Workspace Report
40.
If function f(t) has an initial value f(0-) at t = 0-, the Laplace transform of is
A. sF(s) - f(0-)
B. sF(s) + f(0-)
C. s2F(s) - f(0-)
D. s2F(s) + f(0-)
Answer: Option A
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
41. A voltage v = 5 + 50 sin ωt/ + 5 sin 5 &omegat is applied to a pure capacitor of capacitance 1
ωF. If f/= 314 rad/sec, current is
A. 1 + 0.0157 cos 314 t + 0.00785 cos 1570 t
.
View Answer Discuss in Forum Workspace Report
D. zero variance.
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
44. An ac network has a power factor of 0.8 leading if the applied wave is of fundamental frequency.
If the applied wave contains third and fifth harmonics, the overall power factor will be
A. 0.8 leading
45. Assertion (A): A sweep circuit operates by virtue of recurring transient phenomenon.
Reason (R): Transients are always undesirable.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option C
Explanation:
Many circuits operate due to transient phenomena. Hence R is wrong.
View Answer Discuss in Forum Workspace Report
46. If f(t) = - f(- t) satisfies Drichlet conditions, then f(t) can be expanded in Fourier series containing
A. only sine terms
47. The joint probability function of two discrete random variable X and Y is given by
x = 0, 2, y = 2, 3 then E(y) is
A.
B.
C.
D.
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
48. The joint probability function of two discrete random variable X and Y is given by
x = 0, 2, y = 2, 3 variance σ2 will be
[Hint: σ = E(X ) - μ ⇒ E(X2) - (E(X))2]
2 2 2
A.
B.
C.
D. zero
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
49. A probability density function is given by p(x) = Ke-x2/2 for -∞ < x < ∞ , The value of K should be
A.
B.
C.
D.
Answer: Option A
Explanation:
K can be found by integrating and equating the area under the curve equal to 1.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
B. volt seconds
C. volts/sec
D. volt-sec2
Answer: Option B
Explanation:
Since we integrate with respect to time to F(jω), we get volt-secs.
View Answer Discuss in Forum Workspace Report
2. A voltage V(t) which is a Gaussian ergodic random process with a mean of zero and a variance
of 4 volt2 is measured by a true rms meter. The reading will be
A. 0
B. 4
C. 2
D. 16
Answer: Option C
Explanation:
Rms Uvalue =4.
View Answer Discuss in Forum Workspace Report
3.
C. A is true, R is false
D. A is false, R is true
Answer: Option D
Explanation:
Final value = 5. Hence A is wrong, initial value is 2. Hence R is correct.
View Answer Discuss in Forum Workspace Report
4. An ac circuit has an impedance of (3 + j6) ohm for fundamental. The impedance for fifth
harmonic is
A. (15 + j 30) Ω
B. (15 + j 6) Ω
C. (3 + j 30) Ω
D. (3 + j 1.2) Ω
Answer: Option C
Explanation:
R is independent of w and XL ∝ ω.
View Answer Discuss in Forum Workspace Report
B. y(n + 1)
C. y(n)
D. y(n) + y(n + 1)
Answer: Option A
Explanation:
In Recursive system, Present output depend upon past.
View Answer Discuss in Forum Workspace Report
B. 1 - sgn(t)
8.
If I(s) = , fnal value of i(t) is
A. 0
B. 2.5
C. 12.5
D. ∞
Answer: Option C
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. Non-Causal
C. Depends on x(-n)
D. None
Answer: Option C
Explanation:
If n is +ve then causal, and if n is -ve then non-causal.
View Answer Discuss in Forum Workspace Report
10. In the given figure 15.6 shows a series, R - C circuit fed by a current source i(t). There is an
initial voltage v0. across the capacitor. The system
A. is linear
B. is non linear
12. An ac network has a power factor of 0.8 lagging for fundamental frequency. If the applied
voltage contains thrid and fifth harmonics, the overall power factor will be
A. more than 0.8 lagging
B. 0.8 lagging
B. ≥ 100 n2
C.
D.
Answer: Option D
Explanation:
To avoid aliasing fs ≤ 2fm
.
View Answer Discuss in Forum Workspace Report
14.
B.
C. s F(s) + f(0-)
D.
Answer: Option A
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
15. Choose the function f(t), - ∞ < t < + ∞, for which a Fourier series cannot be defined
A. 3 sin (25t)
C. exp - | t | sin 25 t
D. 1
Answer: Option C
Explanation:
Fourier series is applicable for periodic or finite duration signal and (c) is neither periodic nor
finite duration signal.
View Answer Discuss in Forum Workspace Report
16. Assertion (A): The number ∈ such that the probability that an error is between -∈ and + ∈ is 1 is
called probable error of single obserevation.
Reason (R): The standard deviation is the arms value of the deviation from the arithmetic mean.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
17. Which of the following is the correct Laplace transform of the signal shown in the given figure
A.
B.
C.
D.
Answer: Option B
Explanation:
It is the sum of three functions, i.e., a unit of step function originating at t = 0, a ramp with
Thus .
View Answer Discuss in Forum Workspace Report
18. If x(t) and its first derivative are Laplace transformable and Laplace of transform x(t) is X(s),
then x(t) is
A.
B.
C.
D.
Answer: Option A
Explanation:
It is initial value theorem.
View Answer Discuss in Forum Workspace Report
19. If a function has only cosine terms, it must satisfy the equation
A. f(t) = -f(t)
B. f(-t) = f(t)
C. f(-t) = -f(t)
20.
B. initial voltage
C. initial charge
Since .
View Answer Discuss in Forum Workspace Report
21.
If otherwise find E(X)
A.
B.
C.
D. 0
Answer: Option A
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. 3 + 0.001 V2
C. 3.2 + 0.0012 V2
D. 5.2 + 0.006 V2
Answer: Option A
Explanation:
Use method of least squares.
View Answer Discuss in Forum Workspace Report
23.
B. non-perodic
C. depends on n
D. none
Answer: Option B
Explanation:
24. A 1 kHz sinusoidal signal is ideally sampled at 1500 samples/sec and the sampled signal is
passed through an ideal low pass filter with cut off frequency 800 Hz. The output signal has the
frequency.
A. 0 Hz
B. 0.75 kHz
C. 0.5 kHz
D. 0.25 kHz
Answer: Option C
Explanation:
Given fs = 1500 Hz ⇒ fm = 750 Hz.
The given signal frequency is 1 kHz.
The sampled frequency is 2.5 kHz, 0.5 kHz, But cut off frequency is 800 Hz or 0.8 kHz.
Therefore only 0.5 kHz will pass.
View Answer Discuss in Forum Workspace Report
25.
B. 24
C. 3
D. 288
Answer: Option C
Explanation:
In autocorrelation sequence max. energy lies at origin.
View Answer Discuss in Forum Workspace Report
B. 1
C. δ(f + f0)
D. ∞
Answer: Option A
Explanation:
Eternal mean the range is -∞ to +∞
So F[ejω0t]
=
=δ(f - f0).
View Answer Discuss in Forum Workspace Report
27. If i = 10 + 12 cos 500t - 3.5 sin 500 t, then in amplitude phasse form i =
A. 10 + 12.5 sin (500 t + 106.20°)
B. False
Answer: Option B
Explanation:
The real part of s corresponds to change in amplitude.
View Answer Discuss in Forum Workspace Report
29. A unit step function is used to represent the closing a switch in a constant voltage system.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
30. A voltage v = 100 sin ωt + 10 sin 5 ωt is applied to a pure capacitor having capacitance of 1 μF.
If ω = 314 rad/sec, the current through the capacitor is
A. 0.0314 cos 314 t + 0.0157 cos 1570 t
For Fundamental .
View Answer Discuss in Forum Workspace Report
31.
If then system is
A. casual
B. uncasual
C. casual at z = 0.4, 2
D. uncasual at z = 0.4, z = 2
Answer: Option A
Explanation:
32. A pulse function having magnitude E and duration from t = 0 to t = a can be represented as
A. sum of two pulse functions
difference of two step functions each of magnitude E and one originating at t = 0 and the
C.
other at t = a
33.
If , f(t) =
A. 10 te-2t
B. 10 t2e-2t
C. 10 e-2t
D. 5 t2e-2t
Answer: Option A
Explanation:
.
View Answer Discuss in Forum Workspace Report
34.
If I(s) = , initial value of i(t) is
A. 0
B. 5 A
C. 10 A
D. - 5A
Answer: Option B
Explanation:
.
View Answer Discuss in Forum Workspace Report
B. 0
C. ∞
D. not defined
Answer: Option A
Explanation:
B. trapezoidal function
C. sampling
B. FIR
C. Depends on value of n
D. Cannot determined
Answer: Option B
Explanation:
If we solve the expression, we get H(z) in which, we get multiple poles at the origin and no poles
outside.
Hence it is an FIR system.
View Answer Discuss in Forum Workspace Report
38.
B. - 1, - 1
C. j, - j
D. 1, - 1
Answer: Option D
Explanation:
Eigen values of matrix A are roots of characteristic equation. [λ1- A] = 0 where λ is a scalar.
Therefore
39.
C. A is true, R is false
D. A is false, R is true
Answer: Option D
Explanation:
.
View Answer Discuss in Forum Workspace Report
40. A signal f(t) = cos 10t + 3 cos 4t is instantaneously sampled. The maximum allowable value of
sampling interval Ts in sec is
A. 1 / 4 sec
B. 1 / 8 sec
C. 1 / 8p sec
D. 1 / 10 sec
Answer: Option D
Explanation:
fs = 2 fm where fm is the highest frequency component.
so .
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option C
Explanation:
£f(t) =
£-1F(s) = f(t)
£[a f1(t) + bf2(t)] = aF1(s) + bF2(s)
where
£[f(t - T)] = e-sT F(s)
£[e-at f(t)] = F(s + a)
Convolution Integral
C. A is true, R is false
D. A is false, R is true
Answer: Option A
Explanation:
.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
45. The range of value "a" for which system will be stable. If impulse response of DT system is
= an ∪[n]
A. a>1
B. a < 1
C. 1 < a < ∞
D. -1 < a < 1
Answer: Option D
Explanation:
Given n(n) = an ∪(n)
B. s2
C. s
D. none
Answer: Option C
Explanation:
Unit doublet is
.
View Answer Discuss in Forum Workspace Report
.
View Answer Discuss in Forum Workspace Report
48. Highest value of autocorrelation function 100 sin 50 t is
A. 50
B. zero
C. 100
D. 100/
Answer: Option B
Explanation:
Highest value of autocorrelation is at origin and that is called Energy.
View Answer Discuss in Forum Workspace Report
B. L amperes
C. ∞
D.
Answer: Option D
Explanation:
.
View Answer Discuss in Forum Workspace Report
50. A voltage wave containing 10% third harmonic is applied to a scries R-L circuit. The percentage
third harmonic content in the current wave will be
A. more than 10%
.
View Answer Discuss in Forum Workspace Report
1. The unit step response of a system starting from rest is given by c(t) = 1 - e-2t for t ≥ 0. The
transfer function of the syste is
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
2. y[n] = x[n - k]
3. y[n] = x[2n]
A. (1) and (2)
C. (1) omly
3.
If the system transfer function of a discrete time system then system is
A. stable
B. unstable
C. stable at z = 1
D. unstable at z = 1
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
4. Two rectangular waveforms of duration t1 and t2 seconds are convolved. What is the shape of
the resulting waveform?
A. Triangular
B. Rectangular
C. Trapezoidal
D. Semi-circular
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
5. The function Ae(s + jω)t represens a rotating phasor having a magnitude increasing with time.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. a1a2F1(jω) + F2(jω)
C. a1F1(jω) - a2F2(jω)
D. a1F1*(jω) + a2F2*(jω)
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. power signal
C. energy Power
D. none
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 1
C. δ(t)
D. ej2t
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
9. Which one of the following is the correct statement of the system characterized by the
equation y(t) = ax(t) +b?
A. linear for any value of b
B. linear if b > 0
C. linear if b < 0
D. non-linear
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D. a and b
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
11.
If δ(t) denotes a unit impulse, Laplace transform of is
A. 1
B. s2
C. s
D. s-2
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. has a period
has a period 2, decays with increasing x, is an even function and has zeros at n, n = ±
D.
1, ± 2
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 1 and 3
C. 2, 3 and 4
D. 1, 2
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
16. For an ac sinusoidal wave, the rms value is 10 A. For the same wave delayed by 60° in each
half cycle, the rms value is likely to be
A. 10 A
B. 7.07 A
C. 6.35 A
D. 3.5 A
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
17. It f(t) is an odd function, the coefficients Fn in the exponential form of Fourier series
A. are real
B. are imaginary
C. are complex
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
19. The response of a linea, time invariant discrete time system to a unit step input ∪(n) is the unit
impulse δ(n). The system response to a ramp input n ∪(n) would be
A. ∪(n)
B. ∪(n - 1)
C. nδ(n)
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
20. The impulse response h[n] of a linear time invariant system is given as
If the input to the above system is the sequence ejn/4, then the output is
A. 42 ejn/4
B. 42 e- jn/4
C. 4en/4
D. -4en/4
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C. jω
D. 2 jUω
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. z±k0 X(z)
C.
B. |z| < a
C. |z| = a
D. Entire Plane
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
25.
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
26. X and Y are two random variable and Z = X + Y. Let σx2, σy2 and σz2 be variance of X, Y and Z.
Then
A. σz2 = σx2 + σy2
27. Consider the following sets of values of E, R and C for the circuit in the given figure.
1. 2 V, 1 Ω, 1.25 F
2. 1.6 V, 0.8 Ω, 1 F
3. 1.6 V, 1 Ω, 0.8 F
4. 2 V, 1.25 Ω, 1 F
Which of these of values will ensure that the state equation is valid?
A. 1 and 4
B. 1 and 2
C. 3 and 4
D. 2 and 3
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
28. Assertion (A): The conditions under which it is possible to write Fourier series of a periodic
function are called Drichlet conditions.
Reason (R): If f(t) = - f(- t), it is refereed to as odd symmetry.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C. a and b
D. X(z)at z = 0
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. c1 F1 (jω) - c2 F2(jω)
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
D. 2∪(t) - 1
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
34.
Give that is
A.
B.
C.
D. None of these
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B.
C. [F(z)]1/n
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. odd funtion
B. -j, j, 2
C. 1, 2, j
D. 1, 2, -j
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B.
C. F*(jω)
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. gate function
C. signum function
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
42. A gate function which occurs at t = t0 and lasts for duration T can be written as
A. u (t - t0 - T)
43. Assertion (A): The response of a network to an impluse is determined only by the parameters
of the network.
Reason (R): If f(t) is a unit parabolic function, its Laplace transform is 1/s 3
A. Both A and R are correct and R is correct explanation of A
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
45. If a signal g(t) has energy E, then the energy of the signal g(2t) is equal to ...
A. E/2
B. E/4
C. E
D. 2E
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. linear phase
C. variable phase
D. none
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
47. A trigonometric series has
A. single sided spectra
B. zero
C. sync function
D. undefined
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. odd funtion
49. In what range should Re(s) remains so that Laplace transform of the function e(a + 2)t + 5 exists?
A. Re(s) > a + 2
B. Re(s) > a + 7
C. Re(s) < a
D. Re(s) > a + 5
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
50. Which one of the following rules determines the mapping of s-plane to z-plane?
A. Right half of the s-plane maps into outside of the unit circle in z-plane
B. Left half of the s-plane maps into outside of the unit circle.
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
2.
If , f(t) =
A.
B.
C.
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
3. For a wave v = V 1m sin (ωt + θ1 ) - V3m sin (3ωt + θ3), the rms value is (0.5 V21m + 0.5 V23m)0.5
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. periodic
C. a and b
D. none
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
2.
3. cumulative distribution function
B. 1 and 2 only
C. 1, 2 and 3
D. 1 and 3 only
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D. δ(t)
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. δ(t)
C. '0'
D. infinite
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. stochastic function
C. random variable
D. random experiment
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
10. X and Y are two random variables and Z = X + Y . Letmz, m z, mx, m y represent mean of Z, X and
Y. Then
A. mz = mx + my
B. mz ≤ mx + my
C. mz< mx + my
D. mz > mx + my
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
11. If X(z) = (1 - z-1), and || < |z|, the initial value x0 is
A. 1
B. 0
C. 2
D. ∞
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
12. The triangular wave of the given figure can be written as v(t) = u(t) - tu(t) + (t - 1) u(t - 1)
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
15. If X(z) = 2az-1/(1 - az-1)3 and |a| < |z|, then the initial value x0 is
A. 0
B. 1
C. ∞
D. 2
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
16. When a complex voltage wave is applied to a capacitor the resulting current wave is more
distorted than the voltage wave.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
17.
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. Periodic
C. both a and b
D. None of these
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A. impulse function
B. signum function
21.
Assertion (A):
Reason (R): An impulse has a very high magnitude but very short duration.
A. Both A and R are correct and R is correct explanation of A
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. |g(t)|2
C. |G(f)|2/Bandwidth
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
23.
2.
3. L(t - a)f(t) = as F(s)
4.
Select the correct answer using the codes given below
A. 1, 2, 3
B. 1, 2, 4
C. 2, 3, 4
D. 1, 3, 4
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
24. State space analysis is applicable to
A. time invariant systems
25. If Fn represents Fourier series coefficient of f(t), then Fourier series coefficient of f(t + t) =
A. Fne -jω0
B. Fne jω0
C. Fne jnω0
D. Fne -jnω0
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. non-periodic
C. finite duration
D. all
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B. δ(ω)
C.
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D. noe of these
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
31.
δ(t) dt is a
A. Unit step
B. 0
C. r(t)
D. sinc
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. impulse
D. either (a) or (b)
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. functions of frequency
B. F1(jω)*F2(jω)
C.
D. none of these
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. a ramp of slope k
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
39. Which one of the systems described by the following I/P - O/P relations is time invariant
A. y(n) = n x(n)
C. y(n) = x(- n)
40. A wave f(t) has half wave symmetry and time period equal to T. Then
A.
B.
C.
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
41. The Nyquist sampling interval, for the signal sinc (700t) + sinc (500t) is
A. 1/350 sec
B. /350 sec
C. 1/700 sec
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. ∞
C. 0
D. z
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. F(jω) ejωa
C.
D. a F(jω) ejωa
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
46. The two inputs to an analogue multiplier are x(t) and y(t) with fourier transforms X(f) and Y(f)
respectively. The output Z(t) will have a transform Z(f) given by
A. X(f). Y(f)
B. X(f)+ Y(f)
C. X(f) / Y(f)
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
47. The units of the spectrum obtained be Fourier transforming the covariance function of a
stationery Stochastic Process is
A. Power per Hz
B. energy per Hz
48. FIR digital filter having __________ stability than FIR filter.
A. good stability
B. poor stability
D. poor stability
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
50. A voltage v(t) which is a gaussian ergodic random process witha mean of zero and a varance of
4 volt2 is measured by a meter which first square and then reads its dc component. The reading
will be
A. 0
B. 4
C. 16
D. 2
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
1.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
2.
If
A. -j sgn (f) x X(f)
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
3. Which of the following is/are not a property/properties power spectral density function Sx(ω)?
A. Sx(ω) is real function of ω
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
6. An excitation is applied to a system at t = T and the response in zero for -∞ < t < T. This system
is
A. non casual
B. stable
C. casual
D. unstable
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
7. For the wave i = I0 + I1m sin ωt + I3m sin 3ωt, the rms value is
A. I = (I20 + I21m + I23m)0.5
B.
D. none of these
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
10. Fourier transform of the unit step function (i.e., u(t) = 1 for t ≥ 0 and u(t) = 0 for t < 0) is
A. δ (ω)
B.
C.
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. finite duration
C. non periodic
D. a and b
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
D. F(jω) = - F*(jω)
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
17. A system with input x[n] and output y[n] is given as y[n] = (sin 5/6 n) x(n) The system is
A. linear, stable and invertible
18.
If f (t) is an even function, then in th form
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
19. The output y(t) of a linear time invariant system is related to its input x(t) by the following
equation y(t) = 0.5x(t- td + 1) + x(t - td) + 0.5 x(t - td + 7). The filter transfer function H(ω) of such a
system is given by
A. (1 + cos ωt)e-jωt d
C. (1 + cos ωt)ejωt d
B. power signal
D. none
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
21. Assertion (A): In complex frequency s = σ + jω, the terms s and ω are nepar frequency and
radin frequency.
Reason (R): If ω = 0, the graph of Kest will be a decaying exponential if s <
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
22. If xk = 2k for k ≤ 0 and xk = 0 for k ≥ 0, Z transform of the sequence x is
A.
B.
C.
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B.
C. a and b
D. X(z)at z = ∞
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. random variations
B. X = AX + Bu
C. X = AX + Bx
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
28. The eign values of n x n matrix A are the root of the characteristic equation 1λI - AI = 0
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
29. A signal is x + f(t) where x is constant and f(t) is a power signal with zero mean value. The power
of the signal is
A. x2
B. x2 + f2(t)
30. A pulse function can be represented as difference of two equal step functions.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
31. The impulse response h[n] of a linear time invariant system is given by h[n] = ∪[n + 3 ] + ∪[n - 2]
-2∪[n -7]. The above system is
A. stable but non-casual
32. Which one condition is true to check the periodically for discrete time signal (where K is any
integer, N is period, f0 is frequency of signal)
A. f0 = K/N
B. f0 = K + N
C. f0 = KN
D. f0 = N/K
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
33. If v(t) = 0 for t < 0 and e-t for t ≥ 0 V(jω) = 1/( + jω).
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. non-periodic waveform
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 100
C. zero
D. 100/
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. (n - 1)!/sn
C.
D. n!/sn
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
39. Which one of the following is the correct statement? The region of convergence of z transform
of x[n] consists of the values of z for which x[n] r-n is
A. absolutely integrable
B. absolutely summable
C. unity
D. < 1
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
40. The data about p the pull required to lift a weight wby a pulley block is
B. 2.28 + 0.1879 w
C. 1.2 + 0.25 w
D. 0.6 + 0.3 w
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
41.
B. ∞
C. 1
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
43. A linear discrete time system has the char. equation z3 - 0.81z = 0, the system is
A. stable
B. marginally stable
C. unstable
44. For a signal x(t) the F.T. is X(f). Then inverse F.T of X(3f + 2) is given by
A.
B.
C. 3x(3t)ej3t
D. x(3t + 2)
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. odd
47. Assertion (A): A non-sinusoidal wave can be expressed in terms of sine waves of different
frequencies which are multiples of the frequency of fundamental.
Reason (R): If negative half of a complex wave is a reproduction of the positive half, the even
harmonics are absent.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. f(-t) = f(t)
C. f(-t) = -f(t)
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
3. A system is stable if ROC
A. include the unit circle
C. lies on Circle
D. entire plane
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 1 / s
C. s
D. 1 / s2
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
5. The minimum sampling frequency in sample/sec. required to reconstruct the following signal
from its samples wuthout distortion
would be
A. 2 x 10 3
B. 4 x 103
C. 6 x 103
D. 8 x 103
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
6.
Given that h(t) = 10e-10t u(t) and e(t) = sin 10t u(t). The Laplace transform of f(t) = h(t -
t) e(t)dt is
A.
B.
C.
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. R1/a
C. a/R1
D. R1 + a
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
8. x = AX + Bu is a state equation.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
9. The standard deviation of a set of observations is the rms value of the deviation from the
arithmetic mean.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
11. In a network V(s) = Z(s) I(s) where V(s), Z(s) and I(s) are Laplace transforms of v(t), z(t) and i(t).
The voltagev(t) is
A. v(t) = z(t) i(t)
B.
C.
B. In the channel
C. in Information source
D. at the destination
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
14. As per mormal distribution the probability of an error between limits a and b is
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
15.
If the sequence |xn|1/n converges, then the series converages absolutely is
A. Ratio test
B. Root test
C. Convergence test
D. Divergence test
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
16.
If X(a) is the z transform of kxk, then the z transform of k xk is
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
18. A system is said to be static system, when present output depend upon
A. present I/P
20. If two mutually exclusive events A and B can happen in m and n ways, then either A or B can
happen in (m +n) ways.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
22. The Laplace transform of sin ωt is
A.
B.
C.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
24. If average correlation between v1(t) and v2(t) is R12(t) and average correlation between v2(t)
and v1(t) is R21(t) then
A. R12() = R21()
B. R21() = R12()
C. R12() = - R21()
D. none of these
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. zero variance
26. Algebraic expression for z-transform of x[n] is X[z]... What is the algebraic expression of z-
transform of ejω0nx[n]?
A. X(Z - Z0)
B. X(e-jW0z)
C. X(ejω0z)
D. X(Z)jω0z
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
29. The range of values of a and b for which the linear time invariant system with impulse response.
h(n) = an n ≥ 0
= bn n < 0
will be stable if
A. |a| > 1, |b| > 1
30. If f(- t) = f(t), the function f(t) has only cosine terms.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
31. If a complex voltage wave is applied to a pure inductance, the resulting current wave is much
smoother than the voltage wave.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
|f(t)| e-σ1t dt < ∞ for a real positive σ1
B.
|f(t)| e-σ1t dt < 0 for a real positive σ1
C.
|f(t)| e-σ1t dt < 0 for a real positive σ1
D.
|f(t)| e-σ1t dt < ∞ for a real positive σ1
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
33. In the given figure shows a periodic triangular wave. The Fourier series will have
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. an-2 ∪(n)
C. an+2 ∪(n)
D. an ∪(n + 2)
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 1, 2 and 3 only
C. 1, 2, 3 and 4
D. 2 and 4
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
37. Assertion (A): Fourier series can also be written in exponential form.
Reason (R): sin (n ωt) and cos (n ωt) can be expressed as sum or difference of exponentials.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
38. A number of impulses spaced fron one another form an impulse train.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
39. In a complex wave, the negative half of the wave is a reproduction of the positive half wave.
Then
A. the wave contains only fundamental and third harmonic
40.
If and k > 0
X(z) = - In (1 - z-1) with 1 < |z|
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
41. If f(t) is an odd function
A. True
B. False
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
43. Out of the three transforms viz. Z-transform, Laplace transform and Fourier transform
A. all three are used in continuous time domain
B. all three are used in both continuous time domain and discrete time domain
Z transform is used in continuous time domain while Laplace and Fourier transforms are
C.
used in discrete time domain
Z transform is used is discrete time domain while Laplace and Fourier transforms are
D.
used in continuous time domain
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
44.
In the representation f(t) = the set of complex coefficient Fn is the frequency
spectrum off(t)
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. k δ(t)
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. y(n) = x(n - 1)
D. y(n) = ex(n)
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 2 and 3
C. 1 and 3
D. 1, 2 and 3
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
48. If R() is autocorrelation of a waveform v(t) and R(0) is autocorrelation for = 0, then
A. R(0) > R()
B. R(0) ≥ R()
D. R(0) ≤ R()
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. A is true, R is false
D. A is false, R is true
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
50. For the single rectangular pulse of the given figure
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 0
D. ∞
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
3.
The inverse Fourier transform of the function F(ω) = is
A. sin ωt
B. cos ωt
C. sgnt
D. u(t)
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
4. Let f1(t) = G1(t) + 4, f2(t) = G2(t) + 3. If G1(t) and G2(t) are uncorrected then the correlation
between f1(t) andf2(t) are
A. 12
B. 7
C. 6
D. zero
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
5. If p is the probability of success and q is the probability of failure, then the probability that there
are rsuccesses in n trails is
A. n
cr pr qn - r
B. n
cr pn - r qr
C. n
cr pr qn + r
D. n
cr pn qn - r
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
6. A signal m(t) with bandwidth 500 Hz is first multiplied by a signal g(t) where
The resulting signal is then passed through on ideal low pass filter with bandwidth 1 kHz. The
output of the low pass filter would me
A. δ(t)
B. m(t)
C. 0
D. m(t) δ(t)
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. z = 0
C. Entire Plane
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
9. The unit step response of a system is (1 - et) u(t). Then its impulse response is
A. e- t u(t)
B. - t
e u(t)
C.
D. - - t
e u(t)
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
10. The output of a linear system for any input can be computed in which of the following ways?
A. Only by summation of inpulse response by convolution integral
C. Neither a nor b
B. t eat
C. t2 eat
D. eat/t
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B.
C.
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
14. Assertion (A): If an event A can happen in m ways and another event B can happen in n ways,
both can happen in mn ways.
Reason (R): Two events are mutually exclusive if happening of either precludes the occurrence
of other.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
15.
Assertion (A): In the curve , a high value of h indicate a high peak and rapid fall
in the curve.
Reason (R): If the number of ways in an event may result can be analysed into a successes
and b failures, each equally likely to occur, the probability of success in a single trial is
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
16. Which one of the following digital filters does have a linear phase response?
A. y(n) + y(n - 1) = x(n) - x(n - 1)
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
17. For a second order system, damping ratio ζ is such that 0 < ζ <. Then the roots of characteristic
equation are
A. real but not equal
C. complex conjugate
D. imaginary
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
18.
If is scaled as an x[n] then ROC changes from `R` to
A. Ra
B. R
C. R/a
D. R + a
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. F*(j↔)
C. F*(- jω)
D. none of these
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. δ (ω)
C. δ(ω)/2
D. δ(ω)/
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
21.
B.
C.
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 0.05
C.
(ejnω1t + e-jnω1t)
D.
(ejnω1t - e-jnω1t)
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
25. Assertion (A): The wave shown in the given figure does not contain the dc component and
even harmonics
Reason (R): If f(- t) = f(t) the wave has only cosine terms.
A. Both A and R are correct and R is correct explanation of A
B. Both A and R are correct but R is not correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
28.
B. F(jω)/(jω)n
C. (jω)n-1 F(jω)
D. (b) F(jω)/(jω)n-1
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
29. The value of P(2 < x < 3) in function f(x) = K(x - 1) for K = 1 < x < 4 is
A.
B. 1/3
C. 2/3
D. 1
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
30.
Reason (R): The minor of any element of a determinant ajk is the determinant which remains
when the row and column corresponding to ajk are deleted.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
31. The inverse response of a system h(n) = an∪(n) what is the condition for the system to be BIBO
stable?
A. a is real and +ve
C. |a| > 1
D. |a| < 1
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
32. A system has poles at 0.01 Hz, 1 Hz and 80 Hz, zeros at 5 Hz, 100 Hz and 200 Hz. The
approximate phase of the system response at 20 Hz is
A. -90°
B. 0°
C. 90°
D. -180°
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C. U(t)
D. 2δ(ω)
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
34. If the number of ways an event may result ins analysed into m successes and n failures, each
equally likely to occur, the probability of success in a single trial is m( m + n)
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
35. If n is the number of observations and is the residue, the standard deviation σ =
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. a and b
D. only a
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
37. Assertion (A): The scalling theroem in Laplace transform relates the scale changes in s domain
to the consequent changes in t domain.
Reason (R): If
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
39. If X(z) = (1 - z-1)-1 and || < |z|, the initial value x0 = 0
A. True
B. False
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
42. If X(z) = (1 - a)z-1/[(1 - z-1)(1 - az-1)] and 1 < |z|, the final value of xk is
A. 0
B. 1
C. ∞
D. 2
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
D. none of these
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
45. Which one of following is correct condition to check the stability of sysytem in terms of impulse
response?
A. Σ(x(n)) < ∞
B. Σx(n) < 0
C. Σx(n) = 0
D. Σx(n) = ∞
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
47. which of the following is not true for impulse function δ(t)?
A. δ(t) = 0 for r ≠ 0
C.
D.
Laplace transform is
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
48. In the given figure the phase angle of Fn is either 0 or Π.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
49. The signal m(t) = 10 cos 100 t is sampled at the rate of Fs = 75 Hz, then determine signal after
sampling.
A. 4 cos 100 t + 8 sin 200 t
D. none
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
50. The tree selected for the formation of state equations contains
A. all voltage sources
B. all capacitors
D. £ f(- t) = F* (- jω)
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
2. Assertion (A): Heaviside partial expansion gives a simple procedure to find inverse Laplace
transform of the terms having a complex conjugate pair of roots.
Reason (R): If I(s) = P(s)/Q(s) and all roots of Q(s) = 0 are simple, i(t) will have terms with
exponentials having real exponents only.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
3. An impulse train is
A. a number of pulses
B. should be in cotree
5. If f(t) = 1, F(jω) =
A. 2
B.
C. 2δ ()
D. δ (ω)
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
6. The power in the signal s(t) = 8 cos (20 - /2) + 4 sin (15 t) is
A. 40
B. 41
C. 42
D. 82
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
8. If f(t) ↔ F(jω), f(- t) ↔
A. - F(jω)
B. F(- jω)
C. F(jω)
D. 0.5 F(jω)
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
C. A is true, R is false
D. A is false, R is true
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
10. The minor Mij of an n x n matrix is the determinant of (n - 1) x (n - 1) matrix formed by deleting
the ith row andj the column of n x n matrix.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
12. Assertion (A): A half cycle of sine wave can be expressed as sum of sine wave and another
sine wave shifted by T/2 where T is the time period.
Reason (R): The function u(t - t0) - u(t - t0 - T) is a gate function occuring at t = t0 and of duration
T.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
13. If xk = k and k ≥ 0
X(z) = (1 - z-1)-1 with || < |z|
A. True
B. False
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A. Unit step
B. Unit ramp
C. Unit impulse
D. Unit parabola
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
17. To plot frequency spectrum we draw two graphs viz |Fn| versus frequency and φn versus
frequency.
A. True
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
18. If f(t) is an even function, the coefficients Fn in the exponential form of Fourier series
A. are real
B. are imaginary
C. are complex
19. In Laplace transforms s = σ + jω. Which of the following represents true natue of s. Select your
answer using the given codes
1. σ has a damping effect
B. 1 and 2
C. 2 and 3
D. 1 and 3
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
20.
Assertion (A): If
Reason (R): Displacement in time domain by T becomes multiplication by e-st in s domain.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
21. Assertion (A): Standard deviation is the abscissa of a point of inflection on the probability curve.
Reason (R): The equation for probability curve is
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
22. If f(t) and F(jω) form a transform pair, then as per symmetry in Fourier transforms
A. F(jt) ↔ 2f (- ω)
B. F(jt) ↔ f (ω)
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. finite
D. infninite
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
24. If x(z) is the Z transform of sequence xk, the z transform of sequence (kxk)is
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
25.
If the value of
A. cannot be determined
B. 0
C. 1
D. ∞
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
26. If Sn is the power associated with each frequency component and S(f) is the sum of all these
powers, normalised power spectral density is
A.
B.
C.
D. none of these
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
27. Assertion (A): When a function f(t) is represented as exponential Fourier series, the set of
complex coefficients Fn is called frequency spectrum of f(t)
Reason (R): Frequency spectrum is also called line spectrum.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 0
C. ∞
29. e-3t is a
A. energy signal
B. power signal
D. none
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
30.
For the signal in the given figure the Fourier transform is Then the Fourier transform of
the signal in the given figure
A.
B.
C.
D.
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. σ2 = E(X2) - μ2
D. all
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
32. Let x(t) ↔ X(jω) be F.T pair. The Fourier transform of the signal x(5t - 3) in terms of X(jω) is
given as
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
34. Assertion (A): The Fourier series of the wave shown in the figure does not contain even
harmaonics
Reason (R): If f(t) = - f(t ± T/2) the function is said to have half wave symmetry.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
35. The following table gives some time functions and the Laplace transforms
B. 1 and 4
C. 3 and 4
D. 1 and 2
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. False
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
two graphs viz |Fn| versus frequency and the phase angle of Fn versus frequency are
D.
plotted
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
38. The given figure shows a square wave i(t). Then I(s) =
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
39.
If the region of convergence of x1(n) + x2(n) is then the region of convergence of x1[n]
- x2[n] includes
A.
B.
C.
D.
Answer: Option D
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
40. Assertion (A): Transient periods are of short duration but can result in dangerously high
voltages and currents.
Reason (R): Circuit equations in transient analysis are integral differential equations.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
41.
If f(t) ↔ F(jω), ↔
A. F(jω)
B. [F(jω)]n
C. (jω)n F(jω)
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 10
C. 200
D. zero
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. is nonlinear
C. may be linear or nonlinear dependig on values of a and b
B. is an odd function of
D. 2∪(t) - 1
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
47. For a periodic waveform, the power spectral density and correlation function form
A. a Laplace transform pair
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
49.
What about causality of the system transfer function of a discrete time system
A. uncasual
B. casual
D. Both b and c
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B.
C.
D.
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. 1 and 3 only
C. 1, 3 and 4 only
D. 1 and 4 only
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. statistical dependence
C. ergodic process
D. all
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
B. zero
C. infinite
D. between 1 and 2
Answer: Option C
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
A.
B.
C.
D.
Answer: Option A
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report
56. Assertion (A): The function kest with both σ and ω positive and s > 0 depicts a sinusoid whose
amplitude increases with time.
Reason (R): If σ = 0, kest becomes a sinusoid.
A. Both A and R are correct and R is correct explanation of A
C. A is true, R is false
D. A is false, R is true
Answer: Option B
Explanation:
No answer description available for this question. Let us discuss.
View Answer Discuss in Forum Workspace Report