You are on page 1of 5

Department of Chemical Engineering

Talamban, Cebu City, Philippines 6000

Individual Laboratory Report


(Form CHEL-3)
Laboratory Course :
Experiment Title :
Student’s Name & Signature :
Scheduled Date :
Date Performed :
Date Submitted :
Submission Number :
Teacher’s Name :
Term and Academic Year :

Data Processing and Results Grade


Introduction (x0.20)
Methodology (x 0.20)
Presentation of Results (x 0.20)
Discussion of Results and Conclusions (x 0.20)
Writing Style (x 0.10)
Appearance and Formatting (x 0.10)
Grade

Assessed and Graded By: Engr. May V. Tampus


(Signature over printed name)
Date and Time

1
University of San Carlos
School of Engineering
Talamban, Cebu City, Philippines

CHE 422L
Chemical Engineering Laboratory 1

<REPORT TITLE>
(Subtitle)

A laboratory report submitted to

<Name of Faculty>
CHE 422L Instructor

by

<Name of Student>

<Date>

2
1. Introduction
<Make an exposition here of the relevant concepts, theories, and principles used to describe the
operation or process that is investigated in the experiment. Emphasize on those that directly
serve as frame of reference for the objectives of the experiment. These are the same concepts,
theories and principles that you will use in the discussion and interpretation of experimental
results.>

<If an equation describing important relationships is presented here, it should be indented by two
tab spaces from the left. It should be numbered with the number in parenthesis in the same line
as the equation and flushed to the right. Use MS Equation Editor. See example below.>

L 1
−Δp=4 f⋅ . ρv 2
D 2
(1)

<The introduction must not exceed 2 pages. References should be properly cited using APA
format. Use the “References” feature of MS-Word.>

2. Objectives of the Experiment


<Present here the objectives of the experiment. No introductory statements would be necessary.
Simply copy the objectives appearing in the laboratory manual. See example below.>
a) Describe the mechanism of…
b) Determine the area and depth of an industrial thickener…

3. Methodology
3.1. Methodological Framework
<Present in narrative, preferably with the aid of diagrams, the basic framework which
guided the experimental activities you have done to achieve the objectives. This answers the
more general “how” question associated with each objective. A step-by-step description of
the procedure should not be part of this.>
3.2. Materials
<Present in paragraph form the key materials (substances) used in the experiment.>
3.3. Equipment

3
<Present the key equipment, set-up used in the experiment. Describe its specific features
which allow for actual adjustment of operational settings, direct observation, or
measurement of parameters associated with an operation or a process.>
3.4. Procedures
<Describe here the specific procedures followed in gathering data used for answering the
questions related to the objectives. Here you provide information about the experimental
runs, measurement methods used, working equations for the determination of quantities, and
any details that will enable the reader to replicate the experiment independently. This part
answers the more specific “how” of your laboratory work.>

4. Results and Discussions


4.1 <Relevant Sub-Heading for Objective 1>
<This part is practically the bulk of your DPAR corrected for changes pointed out during the
DPAR discussion session. Here you present your results using the most effective format, be
it tabular, a scatter plot, bar graphs, etc. Remember the simple sequence: present, describe,
discuss.>
4.2 <Relevant Sub-Heading for Objective 2>
<The sub-heading should as much as possible be descriptive of the content of the section.>
4.3 <Relevant Sub-Heading for Objective 3>

5. Conclusions
<Here you declare the conclusions that can be made about the experiment objectives, given the
experimental data and results that you have discussed in the preceding section. No more
explanations and elaborations are necessary here. Make sure that your conclusions are well
backed up by your experimental data.>

References
<It is expected that you use the “References” feature of MS-Word, so you can easily just insert
the list of cited references here.>

<After this section, you start with a new page regardless of how much space is still available on
the page. The new page is but an annex title page to be directly followed by the DPAR (original
and revised drafts).>

4
ANNEX

Data Processing & Analysis Report

You might also like