You are on page 1of 19

ATTACHMENTS

7020 Series Tractors


Issue 02/2006 Region II

John Deere Werke Mannheim


Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-2

ATTACHMENTS FOR FIELD INSTALLATION


Unless otherwise indicated, the following attachments can be installed on all three 7020-Series tractors. Please note
that under „Order From“ it is indicated where the individual field installation kits can be sourced through. The
denoted „EPDC“ bundles can be ordered through the normal parts channels. The denoted „CG“ bundles are
available through complete goods channels.

Field Office
OPERATOR STATION

Instructional Seat

Field Office provides a convenient area for storage of office


supplies. Mounts in an easy to access location at the left rear
side of the cab:
• Ideal for storage of such items as mobile phone, papers,
calculator, PDA’s, writing materials and other uses.
• Lid provides a flat writing surface.
• An external 12-volt electrical outlet is provided with the
Field Office
Padded and upholstered Instructional Seat provides com-
fortable seating for an additional passenger. The seat
includes a back rest with storage netting at the rear and a Order From Bundle Description
retractable seatbelt. Field Office.
EPDC AR116863 Not compatible with RE192707
Order From Bundle Description Instructional Seat.
Instructional Seat.
EPDC RE192707 Not compatible with AR116863 Field
Office. Rear Pull Down Sun Shade
A pull-down shade for the rear windshield improves opera-
tor visibility on sunny days by blocking direct light and
reducing glare.
Order From Bundle Description
EPDC RE197944 Rear Pull Down Sun Shade.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-3

Accessories Mounting Bracket Insulated Cool Box

The accessories mounting bracket assists the installation of


monitors, phones, radios and other accessories in single con-
venient location. The bracket bolts into existing holes on the
7020 Series tractors.
Order From Bundle Description
EPDC RE162262 Accessories Mounting Bracket.
The Insulated Cool Box aids operator comfort by keeping
food and drinks cool and stored securely. The box can be
quickly removed for cleaning or movement between
Utility Tray and Beverage Holder machines. Includes fastening straps and mounting hardware.
Order From Bundle Description
EPDC AL112070 Insulated Cool Box

Refrigerated Cool Box

(8020 shown)
The utility tray contains an additional beverage holder and a
storage platform in which to place papers and other materi-
als.
Order From Bundle Description
EPDC RE162644 Utility Tray and Beverage Holder.

The 12-volt Refrigerated Cool Box will keep food and


drinks chilled through hot working conditions. The box is
capable of maintaining a 30°C difference to ambient tem-
peratures and its 6-litre capacity will take standard 0.75 l
bottles.
The kit additionally features a battery security system pre-
venting accidental discharge while the box is still connected
to the cabin’s 12-volt cigarette lighter outlet without the
engine running. The box can be easily removed for cleaning
or for movement between machines.
Order From Bundle Description
EPDC MC900001 Refrigerated Cool Box
EPDC MC900002 Mounting kit
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-4

Replacement Floor Mat Step Mud Guards

Replacement rubber Floor Mats can be purchased to help


restore the cabin’s original appearance.
Order From Bundle Description
CG R191667 Floor Mat

A left and right-hand step mud guards extend the coverage


Left-Hand Convenience Step offered by the rear fenders:
• Aid in keeping the left and right-hand hand cabin entry
steps clean of mud and debris thrown by wide rear
tyres.

Order From Bundle Description


CG RE215510 Step Mud Guard, LH.
Step Mud Guard, RH.
Tractor must be equipped with Right
CG RE205744 Hand Door and Steps. Requires
purchase of additional parts: 3 x
19M7784

OPERATOR STATION ELECTRICAL

(8020 shown)
Left-Hand Convenience Step provides improved access to Powerstrip Adapters
the front window for cleaning and for GreenStar StarFire
Receiver mounting / dismounting:
• Tread serrated design is self cleaning and slip
resistant.
.
Order From Bundle Description
Left Hand Convenience Step
Possible interference with Toolbox
when tractor is equipped with
EPDC RE162261 Pneumatic Brakes.
Requires the following additional parts:
1 x R202182; 2 x 19M7946; 2 x
24M7344; and 2 x 14M7300
Powerstrip adapters allow electrical connection for monitors
and equipment not fitting the tractor’s standard Powerstrip
or 3-pin oulets. Available adapters include:
• 1m cable for custom hard-wiring to components
• Cigarette lighter-style outlet
• North American-style flat 3-pin adapter (replicates 3-
pin outlet found on Command Console)
• European-style round 3-pin adapter (as available on
6020-Series and pictured above).
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-5

Powerstrip adapters can also be used with the Field Office.


Order From Bundle Description LIGHTING
Standard Connector with 1m Cable (for
EPDC RE67013 hard-wiring electrical components)
EPDC RE67014 Cigarette Lighter Outlet Adapter
EPDC RE67015 NA 3 Pin Adapter for Powerstrip Field Vision Xenon HID Rear Lighting
EPDC RE67016 RII 3 Pin Adapter for Powerstrip

Antenna Mount and Wiring for Business


Band (Two-way) Radio

The fender-mounted Field Vision Rear Lighting bundle pro-


vides a Xenon High Intensity Discharge (HID) light for
improved visibility to rear hitched implements when work-
ing at night or in low light conditions. Xenon HID lights
provide extreme brightness and a daylight colour output for
excellent field definition.
• 2.5x greater light flux (illuminance) than halogen
working lights
• 35% lower energy consumption than halogen bulbs
Provides the wiring and an external antenna mount for busi- • 5x greater service life than halogen bulbs.
ness band (two-way) radios. One HID light is included per field kit. The factory-installed
Rear HID lighting option installs two lights, one for each
Order From Bundle Description
fender.
EPDC RE219922 Antenna Mount and Wiring for
Business Band (Two-way) Radio. Order From Bundle Description
Field Vision Xenon HID Rear Lighting,
EPDC RE203813 Fender Mounted.
Rear Speakers Includes one light per kit.

A kit containing two speakers is available to further


enhance the sound quality of tractors where just two
front speakers were factory-installed.
Order From Bundle Description
CG AR114564 Kit, Two Rear Speakers

Cigarette Lighter and Ash Tray


Cigarette Lighter heat element and Ash Tray can be supplied
for those customers wishing to equip their tractor.
Order From Bundle Description
EPDC AH104259 Ash Tray
EPDC R212866 Ash Tray Insert
EPDC AR60937 Lighter
EPDC AH108380 Bulb
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-6

Two Roof-Mounted Side Flood Lights


Order From Bundle Description
Front Hitch / Loader Lighting Package
Alternative road light package for
EPDC RE225343 tractors equipped with front hitch or
front loader

Rotary Beacon Light

For improved vision to the side of the tractor, the 7020


Series Tractors may be equipped with two 65W floodlights,
one on each side of the cab. The two roof-mounted halogen
side floodlights that are also included in the factory installed
Field Vision Xenon HID Front Lighting Package.
Order From Bundle Description
EPDC RE187746 Two Roof-Mounted Side Flood Lights.
Included in Code 9066

Front Hitch / Loader Lighting


Rotary beacon lights are available to meet requirements in
commercial or governmental applications. The rotating,
high-intensity light mounts on the front left corner of the cab
roof in the up position when in use and can be lowered when
not required to prevent damage. On / Off switch for the bea-
con light is located within easy reach of the operator.
Order From Bundle Description
EPDC RE239930 Beacon Light Kit
EPDC RE235448 Beacon Light Switch Kit

Front Hitch / Loader Lighting package provides alternative


road lighting when front-mounted applications obscure the
tractor’s primary (grill-mounted) road lights:
• Lights are mounted on the cabin’s front A posts
- Allow for improved night vision and safety when
working and transporting with front-mounted
equipment or loaders.
Primary road lights should be used whenever possible:
• Alternative lights to be used only when the front hitch
or loader block the tractor’s primary road lights
• Priority switch within the cabin selects between
primary / alternative road lighting use
• Primary and alternative road lights cannot be used
simultaneously.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-7

Attachment kit includes Performance Monitor, wiring har-


ness, mounting bracket and installation hardware & instruc-
PERFORMANCE MANAGEMENT tions.
Order From Bundle Description
Performance Monitor
Radar Sensor Kit EPDC AR114555 Requires Radar Sensor to achieve
accurate readouts

9-Pin Implement Feedback Connector for


TouchSet Depth Control

The true ground speed Radar Sensor activates functions


contained within the CommandCenter and cornerpost dis-
plays by allowing the tractor to reliably calculate the actual
ground travel speed independent of wheel speed. The radar
needs to be installed in order to utilise the hitch slip com-
mand or to calculate actual wheel slip.
Additionally, the radar improves the accuracy of the follow-
ing CommandCenter readouts: (8020 shown)
• Area covered The 9-pin implement feedback connector required for
• Area / hour TouchSet depth control of implements is available as a field-
• Distance and ground speed
installed attachment. The connector and wiring harness ena-
bles a position input to be provided to the tractor’s Elec-
tronic Selective Control Valve (SCV) control unit on
Order From Bundle Description AutoPowr tractors, enabling TouchSet depth control func-
EPDC RE237256 Radar Sensor Kit (not UK). tionality through the first SCV.
EPDC RE237257 Radar Sensor Kit (for UK only). The feature allows the operator to adjust height and depth of
remote lift cylinders by using the TouchSet controls in the
cab.
Performance Monitor
Order From Bundle Description
9-Pin Connector Implement Feedback.
Required for TouchSet depth control.
Only compatible with Codes 0994 and
EPDC RE58827 0995.
RE58827 is also utilised for Implement
Single-Lever Control Lift Assist Kit for
PQ+, AQ+ and AutoPowr tractors

The Performance Monitor can be equipped to display infor-


mation related to various speeds, area, distance and alarm
data additional to the readouts seen in the CommandCenter.
A radar sensor is required for a 100% accurate calculation of
wheel slip, distance covered and speed.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-8

Implement Switch Implement Connector and Implement


Communications Gateway
To cater for customers who originally ordered their tractor
GreenStar Ready but without the Implement Connector and
Implement Communications Gateway and then wish to
achieve ISO compatibility, both the Implement Connector
and Gateway are available separately as a field attachment
bundle.
When both the tractor and any implements include commu-
nication devices that meet ISO standards, the Implement
Communications Gateway allows for tractor / implement
Mounts on the implement and monitors when the implement communication. Fully equipped with the Implement Con-
is raised or lowered. When used in conjunction with the nector, the tractor is also compatible with GreenStar Parallel
Radar Sensor and Performance Monitor gives 100% accu- Tracking and Basic Field Doc products from AMS. For
rate hectare coverage. details of additional components needed for GreenStar prod-
ucts please refer to the AMS Ag Sales Manual and Price
Order From Bundle Description
Pages.
EPDC RE21519 Implement Switch with 3m (10 Ft.)
Harness. Order From Bundle Description
Implement Connector and Implement
Communications Gateway (TECU -
Tractor Electronics Control Unit).
AG MANAGEMENT SOLUTIONS Attachment specific software bundle is
required for proper operation. Order
software Part Number (specified in kit)
through the JD Point Ordering System.
Machine model number and serial
EPDC RE213115 number is required. Download through
Implement Connector
Service Advisor's software delivery
system as required.
A decription of the software download
procedure is described within the MIB:
http://www.r2.deere.com/marketinginfo/
Product_Information/Tractors/7020/
7020-2004-05.pdf

Parallel Tracking

To cater for customers who originally ordered their tractor


GreenStar Ready but without the Implement Connector and
then wish to run either of the GreenStar Parallel Tracking
and Basic Field Doc products from AMS, the Implement
Connector is available separately as a field attachment bun-
dle.
For details of additional components needed for GreenStar
products please refer to the AMS Ag Sales Manual and
Price Pages.
GreenStar Parallel Tracking provides a unique, modular
Order From Bundle Description solution for straight and curved-line tractor guidance, elimi-
Implement Connector. nating overlap and skipping. The operator can easily keep
Required for GreenStar Parallel track of straight-line progress by occasionally glancing at
Tracking or Field Doc functionality. Also the GreenStar Display or by listening to audible tones.
EPDC RE208786 requires 4 x 37M7109 available GreenStar Parallel Tracking system thereby allows for:
through Service Parts. See AMS price • Reduced overlap and skipping
pages for additional components that • Successful night-time operation
are needed for these options. • Operation through adverse weather conditions
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-9

Parallel Tracking kits are available from AMS Europe using Field Doc
JDmint. Dealers are free to source the remaining GreenStar
Common Components and a subscription to the StarFire
SF2 differential correction signal required to form a func-
tional system through using existing customer-owned items
or by sourcing from AMS Europe and StellarSupport
respectively.
For further code details, please refer to the AMS Sales Man-
ual and Price Pages.

AutoTrac Assisted Steering

GreenStar Field Doc offers a simple way to record informa-


tion on operations including tillage, seeding, spraying, ferti-
lising and in applying manual or automatically variable
input rates required for modern farm documentation prac-
tices. In addition, customers can also draw upon a simple
and highly accurate boundary measurement tool incorpo-
rated into the Field Doc system.
Collected data is readily transferable to a home PC running
JDOffice or other approved desktop software to provide val-
uable farm management information. Field Doc assists cus-
tomers by:
The AutoTrac Assisted Steering System greatly enhances • Optimising production.
tractor utility by providing fully automated vehicle guidance • Reducing administrative paperwork for effective farm
along successive parallel passes. management.
AutoTrac field kits containing all necessary hardware, For further code details, please refer to the AMS Sales Man-
brackets and the geofenced, platform-specific AutoTrac ual and Price Pages.
KeyCard in a single bundle are available from AMS Europe
using JDmint. Dealers are then free to source the remaining
GreenStar Common Components (inclusive Terrain Com- JDLink
pensation Module) and a subscription to the StarFire SF2
differential correction signal required to form a fully func-
tional AutoTrac system by using existing customer-owned
items or by sourcing from AMS Europe and StellarSupport
respectively.
For further code details, please refer to the AMS Sales Man-
ual and Price Pages.

The innovative GreenStar JDLink system from AMS allows


customers to optimise the true performance capabilities of
their 7020 by collecting machine data for management pur-
poses. Using mobile phone technology, JDLink continu-
ously transmits signals from the tractor’s CAN Bus system
to a central John Deere server where the information can
then be made available to users via a JDLink website or
through email, fax or SMS messaging.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-10

JDLink field kits containing the Communications Controller


and Cab Hardware are available from AMS Europe through
JDmint. For information on the JDLink system and the
TRANSMISSION AND PTO
appropriate tractor bundles required to form a fully func-
tional JDLink system, please refer to the AMS Ag Sales
Manual and Price Pages.
Field Cruise for PowrQuad Plus

ENGINE

Cold Weather Start Aid

Where desired, PowrQuad Plus tractors can be equipped


with the Field Cruise feature as a field-installed attachment
via a software download. Field Cruise simplifies planting,
For the 8.1 litre engine, an in-cab operated ether starting aid spraying and other light load tasks by allowing the operator
can be equipped for customers who frequently start their to set an upper engine rpm limit between 1350 and 2200
tractors at or below temperatures of -6ºC. A button on the rpm to attain a desired ground travel speed (interpreted as
steering column injects starting fluid from starting fluid can, wheel speed). Constant ground speed is maintained in light
which is replaceable. load conditions, even as loads on the tractor vary.
Order From Bundle Description • Valuable feature for operations where application rates
are dependent upon controlled ground speed (spraying,
Kit, Cold Weather Start Aid for 8.1 L fertiliser spreading, seed drilling, etc.).
CG RE215421 Engine. • Limiting engine speed in light load situations may
Model 7920 only.
improve fuel economy.
Please refer to the Transmissions section for further opera-
tional details.
Order From Bundle Description
Field Cruise for PowrQuad Plus
Tractors
Attachment specific software bundle is
required for proper operation. Order
Software Part Number (specified in kit)
through JD Point System. Machine
model number and serial number is
EPDC RE242904 required. Download through Service
Advisor's software delivery system as
required.
A decription of the software download
procedure is described within the MIB:
http://www.r2.deere.com/marketinginfo/
Product_Information/Tractors/7020/
7020-2004-05.pdf
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-11

Back-up Alarm All front PTO’s feature wet clutches, modulated engage-
ment, manual output and shaft indexing. The integrated
FPTO design also offers full compatibility with the 7020
tractor’s intelligent management features including:
• IMS programming compatibility
• In-cab soft start engagement modulation through the
CommandCenter
• Integrated console controls
• Corner post display engagement indicator.

Order From Bundle Description


Kit, Mounting Parts for Front PTO, with
EPDC RE214457 TLS.
Independent Front PTO with 34.9mm
(1-3/8 In.) 6-Spline, 1000 rpm Counter-
clockwise rotating shaft (Type 1).
Models 7720, 7820 and 7920.
Attachment specific software bundle is
required for proper operation. Order
Software Part Number (specified in kit)
A Back-up Alarm is available to accommodate governmen- through JD Point System. Machine
tal or industrial sales of the 7720, 7820 and 7920 Tractors EPDC RE211436 model number and serial number is
required. Download through Service
not equipped with pneumatic air brakes. The alarm sounds Advisor's software delivery system as
whenever the transmission is placed in reverse. required.
A decription of the software download
Order From Bundle Description procedure is described within the MIB:
Back-up Alarm http://www.r2.deere.com/marketinginfo/
CG RE212187
Incompatible with Air Brake system. Product_Information/Tractors/7020/
7020-2004-05.pdf
Independent Front PTO with 34.9mm
Front PTO Equipment (1-3/8 In.) 21-Spline, 1000 rpm
Clockwise rotating shaft (Type 2).
Models 7720 and 7820 only.
Attachment specific software bundle is
required for proper operation. Order
Software Part Number (specified in kit)
through JD Point System. Machine
EPDC RE211437 model number and serial number is
required. Download through Service
Advisor's software delivery system as
required.
A decription of the software download
procedure is described within the MIB:
http://www.r2.deere.com/marketinginfo/
Product_Information/Tractors/7020/
7020-2004-05.pdf
Independent Front PTO with 44.5mm
(1-3/4 In.) 20-Spline, 1000 rpm
Clockwise-rotating shaft (Type 3).
Model 7920 only.
Attachment specific software bundle is
required for proper operation. Order
Software Part Number (specified in kit)
through JD Point System. Machine
EPDC RE211438 model number and serial number is
required. Download through Service
For full tractor versatility, three full power 1000 rpm Front Advisor's software delivery system as
PTO’s are also available for field installation on 7020-Series required.
tractors. The three FPTO options offer customers the choice A decription of the software download
of direction of rotation and output shaft diameter required to procedure is described within the MIB:
http://www.r2.deere.com/marketinginfo/
suit their own individual applications. Available are: Product_Information/Tractors/7020/
• Type 1, 1000 rpm (counter clockwise) 34.9mm 6-spline 7020-2004-05.pdf
Front PTO (all models)
• Type 2, 1000 rpm (clockwise) 34.9mm 21-spline Front
PTO (7720 and 7820 only)
• Type 3, 1000 rpm (clockwise) 44.5mm 20-spline Front
PTO (7920 only)
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-12

Rear PTO Equipment Front Weight Set - Regular

(8020 shown)
The attachment kit includes 20 Quick Tatch weights, each
The kit, designed for 7920 tractors equipped with Code weighing 50 kg.
2418, includes the reversible PTO shaft providing 540 /
1000 rpm PTO speeds. The kit readily substitutes the exist- OrderFrom Bundle Description
ing 1000 rpm 44.5 mm, 20-spline shaft to provide compati- Weight Set, 1000 kg
bility with 34.9 mm 540 rpm (6-spline) and 1000 rpm (21- EPDC AL71258 Requires Mounting Hardware - see
spline) implements. following.

Order From Bundle Description


Conversion Kit from 44.5 mm (1-3/4 Front Weight Mounting Kits
In.) 1000 rpm to 34.9 mm (1-3/8 In.)
540/1000 rpm PTO.
EPDC RE218639 Model 7920 only.
Conversion for tractor equipped with
Code 2418.

WHEELS AND BALLAST

Pick up Weight - 900 kg


Attachment hardware for installing front weights can be
ordered as follows. Two retainers, two washers and two cap-
screws (as appropriate) are required.
OrderFrom Bundle Description
Retainer
EPDC AR68801
Order 2 x AR68801
Washer
EPDC 24M7241
Order 2 x 24M7241
Capscrew for mounting 4 suitcase
EPDC 19H1926 weights
Order 2 x 19H1926
Capscrew for mounting 12, 16 or 20
EPDC R59761 suitcase weights
Order 2 x R59761
The 900kg Big Pack 'Monster' weight provides customers
with convenient ballasting to optimise tractor performance.
The weight can be quickly mounted onto the front weight
support and, when equipped with an additional centrelink
Trailer Coupling Front Weight Set
bracket, also fits Cat. II / III front or rear 3-point hitches. The attachment kit includes 2 special coupling weights
weighing 50 kg each that can be used within a front weight
Order From Bundle Description package to create a trailer coupling. The total kit weighs 100
EPDC AL112166 Pick up weight, 900 kg kg.
EPDC AL113121 Center link bracket for pick up weight
OrderFrom Bundle Description
EPDC AL119964 Weight Set, 100 kg
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-13

Rear Wheel Weights


OrderFrom Bundle Description
EPDC RE208559 Steel Wheel Rim for fitment of
18.4R42 or 480/80R42 tyres (Qty 1)
Steel Wheel Rim for fitment of
EPDC RE208557
20.8R38 or 520/85R38 tyres (Qty 1)
Steel Wheel Rim for fitment of
EPDC RE208556
20.8R42 or 520/85R42 tyres (Qty 1)
Steel Wheel Rim for fitment of
EPDC RE219206 18.4R46, 480/80R46 or 520/85R46
tyres (Qty 1)
Steel Wheel Rim for fitment of 620/
EPDC RE208548
70R42 or 650/65R42 tyres (Qty 1)
Steel Wheel Rim for fitment of 620/
EPDC RE208544
70R46 tyres (Qty 1)
Steel Wheel Rim for fitment of 710/
Rear wheel weights are available for optimum ballasting EPDC RE208543 70R38, 650/85R38 or 650/75R38 tyres
and can be mounted on either of the inner or outer sides of (Qty 1)
the steel or heavy-duty cast rear wheels as desired. Weight Steel Wheel Rim for fitment of 800/
carrying capacities of the tyres must always be observed. EPDC RE208540 70R38 tyres (Qty 1)
100 mm axle only.
When mounting cast weights on the outside of the wheel, a
75 kg weight should first be mounted. Up to three, 205 kg Note: Tyre load carrying capacities must be observed.
weights can then be added per side. The first 75 kg weight is
required to allow clearance to the gear for the rack and pin-
ion when changing tread settings. Mounting the 205 kg Rims for Heavy Duty Cast Wheel
weights directly to the rear wheel otherwise requires remov-
ing the weights when adjusting tread width.
OrderFrom Bundle Description
CG R167153 Rear Wheel Weight, 75 kg (Qty 2)
CG R207782 Rear Wheel Weight, 205 kg
Note: Mounting hardware required. See parts
catalogue.

Rims for Steel Wheel With Cast Hub

Customers utilising the Substitutable Rear Shipping Wheels


option can source rims to mount on the Heavy Duty Cast
hub and centres supplied with the tractor.
• Allows for custom fitment of rear tyres
• Tight fit hole and slot hole on both the disk-to-rim and
disk-to-axle centres the disc to rim.
• Well suited for heavier draft applications.

Customers utilising the Substitutable Rear Shipping Wheels


option can source required Steel Wheels to mount on cast
hub supplied with the tractor.
• Allows for custom fitment of rear tyres
• One-piece steel disc / rim design provides lighter
overall weight
• Well suited for weight-conscious transport, seedbed or
mowing applications.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-14

The following rims are available for all models in observ- Drive Wheel Hardware for Clamp-on Dual
ance of restrictions offered ex-factory (Group 48: Usage
AutoPowr, 5-step front: rear, tyre capacities, etc). Unless
stated, rims have 76.2 mm offset.
OrderFrom Bundle Description
Wheel Rim for fitment of 320/90R50
tyres
EPDC RE172185 Group 46 tyre: note front tyre
requirements
Wheel Rim for fitment of 420/80R46
tyres
EPDC RE175532 Group 46 tyre: note front tyre
requirements
Wheel Rim for fitment of 480/80R42
tyres
EPDC RE175481
Group 46 tyre: note front tyre
requirements
Wheel Rim for fitment of 520/85R38 or
20.8R38 tyres
EPDC RE174760 Group 46 tyre: note front tyre
requirements
Wheel Rim for fitment of 320/90R54
EPDC RE161991
tyres
Hardware kits for both the Regular Duty Steel Wheel with
Wheel Rim for fitment of 380/90R50
EPDC RE172186 Cast Hub and for the Heavy Duty Cast Rear wheels are to be
tyres
used when using clamp on duals:
Wheel Rim for fitment of 380/90R50 • Provides extra clamping force for hub to axle.
EPDC RE172896 tyres
174.8 mm offset
EPDC RE175533 Wheel Rim for fitment of 480/80R46, Order From Bundle Description
18.4R46 or 520/85R46 tyres
Drive Wheel Hardware for Cast Wheel.
Wheel Rim for fitment of 520/85R42 or CG AR219840 Hardware for cast hub to be used when
EPDC RE175484 20.8R42 tyres clamp-on duals are used.
EPDC RE176459 Wheel Rim for fitment of 520/85R42, Drive Wheel Hardware for Steel Wheel
20.8R42 or 580/70R42 tyres with Cast Hub.
CG AR219841
Wheel Rim for fitment of 620/70R42 or Hardware for cast hub to be used when
EPDC RE176460 650/65R42 tyres clamp-on duals are used.
EPDC RE166180 Wheel Rim for fitment of 650/75R38,
710/70R38 or 650/85R38 tyres
Wheel Rim for fitment of 900/50R42 Deluxe Pivoting Fenders
EPDC RE175489 tyres
0 mm offset
Wheel Rim for fitment of 480/80R50
EPDC RE164038 tyres
Wheel Rim for fitment of 620/70R46
EPDC RE174387
tyres
Wheel Rim for fitment of 710/70R42
EPDC RE224262 tyres
100 mm axle only
Wheel Rim for fitment of 800/70R38
EPDC RE171073 tyres
0 mm offset
Note: Tyre load carrying capacities must be observed.

Deluxe Pivoting MFWD Fenders can be ordered for pre-


MY2005 customers looking to replace ’standard’ fixed
fenders. Pivoting fender design allows the fender bracket to
contact against tractor frame and then swivel for tighter turn
angles.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-15

• Required for Group 43 front tyres and for Group 42


tyres set at 1979mm and wider tread settings.
HYDRAULICS
Fenders feature a full range of adjustments to accommodate
a variety of tread settings.
• Made of heavy-duty polymers for high durability and
long life.
• Fenders offer UV protection for fade resistance. Selective Control Valve Equipment
Fenders can be ordered for appropriate tyre section widths:
OrderFrom Bundle Description
Deluxe Pivoting Front Fenders - 480
mm. (18.7 In) Wide
CG RE211530 Recommended use with 290 mm (12.4
In.) to 420 mm (16.9 In) tyre widths
Deluxe Pivoting Front Fenders -
620mm. (24.4 In) Wide
CG RE211529 Recommended use with 480 mm (18.4
In.) to 600 mm (23.6 In.) tyre width.

Chock Blocks

To enhance hydraulic performance and improve tractor pro-


ductivity, the following kits are available for 7020 Series
Tractors.
Order From Bundle Description
Third Mechanical Rear Remote
Cylinder Control Valve with Breakaway
EPDC RE211613 Couplers and High Pressure Relief
Lever.
Chock blocks are advised for use as an additional For PowrQuad Plus or AutoQuad Plus
safety measure when parking tractor / trailer combina- models 7720, 7820 only.
tions and to fulfil statutory regulations where required. Fourth Mechanical Rear Remote
Additional Block Holder bracket can be assembled Cylinder Control Valve with Breakaway
when not previously supplied ex-factory (see Parts Couplers and High Pressure Relief
EPDC RE211615 Lever.
Catalogue).
For PowrQuad Plus or AutoQuad Plus
Order From Bundle Description models 7720, 7820 only.
EPDC AL26777 Chock Block (Quantity 1) Fourth EH Rear Remote Cylinder
Control Valve with Breakaway Couplers
EPDC RE211617
and High Pressure Relief Lever.
For AutoPowr tractors only.
Auxiliary Mid-Mount Valve Plumbing Kit
CG RE214368
- No TLS.
Auxiliary Mid-Mount Valve Plumbing Kit
EPDC RE214369
- TLS Only.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-16

Order From Bundle Description The attachment kits include couplers, connecting hoses, dust
covers and installation hardware & instructions.
Auxiliary Mid-Mount EHSCV 2 or 3
Function Joystick, RH Console Order From Bundle Description
For PowrQuad Plus or AutoQuad Plus
models 7720, 7820 only. Power Beyond Kit for PowrQuad Plus
Attachment specific software bundle is and AutoQuad Plus.
EPDC RE211439 For PowrQuad Plus or AutoQuad Plus
required for proper operation. Order
software Part Number (specified in kit) models 7720, 7820 only
through the JD Point Ordering System. Power Beyond Kit for AutoPowr.
EPDC RE214360 Machine model number and serial EPDC RE218430
For AutoPowr tractors only.
number is required. Download through
Service Advisor's software delivery
system as required.
A decription of the software download Hydraulic Motor Return
procedure is described within the MIB:
http://www.r2.deere.com/marketinginfo/
Product_Information/Tractors/7020/
7020-2004-05.pdf
Auxiliary Mid-Mount EHSCV 2 or 3
Function Joystick, Command Arm
For AutoPowr tractors only.
Attachment specific software bundle is
required for proper operation. order
Software Part Number (specified in kit)
through the JD Point Ordering System.
Machine model number and serial
CG RE214363 number is required. Download through
Service Advisor's software delivery
system as required.
A decription of the software download Hydraulic motor return kits allow the return of used hydrau-
procedure is described within the MIB: lic oil directly into the tractor’s sump, bypassing the remote
http://www.r2.deere.com/marketinginfo/ coupler and SCV. The kits are then ideal for use with imple-
Product_Information/Tractors/7020/ ments where minimal back pressure is desired, i.e. those
7020-2004-05.pdf equipped with hydraulic motors or where hitch valves with
Kit to Convert 2 Function to 3 Function lift assist wheels are installed.
CG RE217197 Auxiliary Stack.
Two kit versions are available with either with single or dual
Auxiliary Mid-Mount EHSCV Valve, 2
EPDC RE214364 return lines. The dual return line version includes a case
Function.
drain.
Auxiliary Mid-Mount EHSCV Valve, 3
CG RE214365 Function. Order From Bundle Description
Hydraulic Motor Return Kit.
For use with hydraulic motor returns or
Power Beyond on hitch valve with lift assist wheels.
EPDC RE211440 For multiple motor return without case
drain order two RE211440. For multiple
motor return with case drain order one
RE211440 and one RE211441.
Hydraulic Motor Return Kit with Case
Drain.
Includes two return lines and case
drain.
EPDC RE211441 For use with hydraulic motor returns or
on hitch valve with lift assist wheels.
For multiple motor return with case
drain order one RE211440 and one
RE211441.

Implement Single-Lever Lift Control


Many implements including manure spreaders, forage wag- The Implement Single-Lever Control Lift Assist Kit allows
ons, seeders and sprayers requiring hydraulic power are operation of a hitch mounted implement and its lift assist
equipped with their own pressure and flow compensating wheels at the same time using the SCV control lever.
hydraulic valves to independently control oil flow. For these The kit connects the rear hitch cylinder to the 9-Pin Imple-
applications, the Power Beyond System can be equipped to ment Feedback Connector to disable the hitch from its con-
provide live hydraulic power independent of the tractor’s trols and allow operation of the hitch with the SCV.
own SCV performance, ensuring adequate, controlled • 9-Pin Electrical Feedback connector first required.
power supply to the implement and optimising tractor per- Refer to Performance Management section for details.
formance when the supply is no longer needed.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-17

Order From Bundle Description HITCH AND DRAWBAR


Implement Single-Lever Control Lift
Assist Kit
9-Pin Electrical Feedback Connector
CG RE211647
Kit RE58827 for TouchSet Depth
Control first required for RE211647 to 3 In 1 Hitch Equipment
function.

Hydraulic Trailer Brake Kit

To fulfil the future hitch equipment demands of customers, a


number of the 3 in 1 hitch design components are also avail-
able for field installation. The 3-in-1 rails, auto coupling
Wagon Hitch, Piton Fix and Ball type hitches and the Regu-
lar Cat 2 drawbar (see later) can be supplied.
Order From Bundle Description
Hydraulic trailer brakes allow modulated braking of trailers 3 in 1 Hitch Rails for Type 1 or 2 (1-3/
equipped with hydraulic brake systems for safer and more CG RE217497 8”) PTO.
controlled braking. The system utilises a delay valves that For Models 7720 and 7820 only.
actuates the trailer brakes immediately prior to tractor brak- 3 in 1 Hitch Rails for Type 3 (1-3/4”)
ing: CG RE217498 PTO.
• Connects directly to tractors hydraulic system. For Model 7920.
• Does not require a separate oil reservoir.
Ball Hitch for 3-in-1 rails.
The attachment kit includes hydraulic trailer brake valve, EPDC AL163697 Requires Code 2719 or Field
coupler and installation hardware & instructions. Attachments RE217497 or RE217498.
Piton Fix Hitch for 3-in-1 rails.
Order From Bundle Description EPDC AL163696 Requires Code 2719 or Field
CG RE213100 Hydraulic Trailer Brake. Attachments RE217497 or RE217498.
Kit, Wagon Hitch (Automatic Coupling).
CG RE217499 Requires Code 2719 or Field
Attachments RE217497 or RE217498.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-18

Pickup Hitch The Cat 3 drawbar (shown) can be installed to extend capa-
bilities over the ex-factory Cat 2 version. Key specifications
are as so:
• Towable load (assisted braking): 14T (Cat 2 11.5T).
• Vertical Load (fully retracted): 3000daN (Cat 2 2800
daN)
• Drawbar Pin - 1.5-in. diameter (Cat 2 1.25-in.)
• Drawbar dimensions - 2-in. thick x 3-in. wide (Cat 2
1.5-in. x 3-in.)
Order From Bundle Description
EPDC RE194407 Quick Pin Hammer Strap Kit for
Category 2 Drawbar.
Dropdown Drawbar Kit, Cat. 2.
EPDC RE211559
Requires Group 48 Tyres.
CG RE211553 Category 3 Drawbar Kit

STORAGE

The Pickup Hitch with Drawbar allows for fast one-man Storage Container - 45 l
hitching of twin axle trailers or trailed implements requiring
close-coupled hitch points:
• Hydraulically coupled and controlled in-cab using first
SCV.
The hitch includes both a Cat 2 drawbar and hook.
Order From Bundle Description
Pickup Hitch for Type1 or 2 (1-3/8”)
CG RE211561 PTO.
For Models 7720 and 7820 only.
Pickup Hitch for Type 3 (1-3/4”) PTO.
CG RE219845 For Model 7920.

Drawbar Equipment

(6020 shown)
The 45 l Tool Storage Container can be mounted to either of
the tractor’s base weight, its Quick Tatch weights (requires
Trailer Coupling Set) or the 900 kg Pick up Weight for con-
venient storage of tools and implement equipment.

Available Quick Pin Hammer Strap allows for simplified


implement hookup to drawn implements. Tractors equipped
with the taller Group 48 rear tyre sizes can utilise a Drop-
down Drawbar Kit to maintain level implement hitching and
improve drawbar / implement compatibility.
Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-19

The volumous sheet metal storage container can carry up to Kit contains two handles with lock cylinders, four keys
45kg of gear and includes side handles for easy movement and installation instructions. Further spare keys can be
between machines. A quick lock pin secures the container cut from the blank.
lid.
Order From Bundle Description
Order From Bundle Description EPDC AL71345 Door Lock Kit
Storage container, 45 l EPDC AL71350 Blank Key
EPDC AL120005 Max. 45kg payload

Battery Disconnect
VANDALISM PROTECTION

Lockable Fuel Tank Cap

Externally-mounted battery disconnect kit can be used both


to immobilise the tractor and prevent unintended use as well
as in avoiding battery draining from running monitors or
radios.
Order From Bundle Description
EPDC RE212216 Battery Disconnect

A lockable fuel filler cap can be equipped for pre-MY2005


customers looking to gain additional protection against van-
dalism and theft.
Order From Bundle Description
Kit, Locking Fuel Cap.
EPDC RE211434 Included in base equipment for
MY2005 tractors.

Door Lock Kit

Door lock kit provides individually keyed cabin door locks


as a deterrent to vandalism and theft. The kit also aids in sat-
isfying insurance policies where commonly keyed vehicles
cannot be guaranteed cover against damage or theft.

You might also like