You are on page 1of 7

ATR 72-600

Making the ATR 72-600 papercraft is simple!


First print the model. Then cut, fold and glue it to have your ATR 72-600!
Average time required: 14 hours.

1:50 Origami / Papercraft


help
7 Step number

Parts reference :
right part In red: Left part
valley In green: Right part

mountain

cut 1. Cut the parts required in the step.


2. Fold the parts.
Check mountain and valley foldings.
3. Glue the parts.
The step is finished.

Use sheets of paper White glue


weight: 160 to 180 grs/m2 Preferable because it does
Avoid too thin, fragile, not damage the ink on the
and difficult to fold paper. paper.
Metalic ruler Paper knife or flat object
to be used to cut straight to fold the paper neatly.
lines.
Tweezers
Brush to handle small parts.
to apply glue on the paper.

Cutter or blade or/and scissors Felt tip pens


Blade is prefered to make to color the thickness of
paper edges.
precise cuts.
Cutting mate.

AT R 7 2 - 6 0 0 2
1 2 3 4

5 6 7 8

9 10 11 12

AT R 7 2 - 6 0 0 3
13 14 15 16

17 18 19 20

21 22

23 24 25 26

27 28 29

AT R 7 2 - 6 0 0 4
30 31

32 33 34 35

36 37 38

39 40
top bottom

AT R 7 2 - 6 0 0 5
41 42 43 44

45 46 47 48

49 50 51 52

AT R 7 2 - 6 0 0 6
53 54 55 56

57 58

AT R 7 2 - 6 0 0 7

You might also like