Professional Documents
Culture Documents
The principles of carrier selection and local sorting areas are described in the
Translation management operator guide, TRGOP.
• digits in the dialing received from an analog or digital subscriber line or an ISUP
(ISDN user part) circuit,
• the digits received from the ETSI (European Telecommunications Standards Institute)
access with the TNS information element in DSS1 (digital subscriber signaling N 1)
and DSS1+ environments,
• the TNS parameter containing the network’s type and identification plan as well as
the number of the requested network, in the ISUP environment and all its variants
(SSURF, SSURN, ISUPV2),
These conditions are valid whatever the carrier selection mode on a per call basis or
by preselection.
To set up carrier selection, the following operations must be carried out by the
manufacturer in the records of the FIPAM, files:
1. Setting the PRET parameter which specifies the number of the carrier number
preanalysis table.
2. Setting the NBSTR parameter which specifies the number of digits (1 to 4) of the
carrier number to be counted before the preanalysis digits.
3. Setting the NTi parameter (where i = 0 to 15) which specifies the typing of the
analysis tables, where i is equivalent to the analysis table number indicated by the
preanalysis:
In Local Exchange –
PRECR:
CEN=1/03-02-21/11 H 19 MN 54/PREANALYSIS CREATION
@PRE=0010 21,PREA=1,PRES=11,RCA=7,RCE=7,CHA=2100,DIS=ISTA;
PROCESSING TPREIN ACC
PREA = 01
PRE = 0010
PRES = 11 DIS = ISTA
RCA = 07 RCE = 07 CHA = 2100
PROCESSING TPREIN EXC
@PRECR:
CEN=1/03-02-21/11 H 20 MN 07/PREANALYSIS CREATION
@PRE=21 00,PREA=11,TRAD=10,RCA=5,RCE=5,CHA=21;
PROCESSING TPREIN ACC
PREA = 11
PRE = 2100
TRAD = 10
RCA = 05 RCE = 05 CHA = 21
PROCESSING TPREIN EXC
Where –
0010 is the access code for international calls.
21 is the international carrier code.
Discrimination ISTA in pre-analysis prevents the subscriber to dial carrier access code
(010, 0010 or 9510) if he hasn’t subscribed to the carrier pre-selection facility on per call
basis. The subscriber who has not subscribed to this facility will have the category ISTA
on it.
@PRECR:
CEN=1/03-02-21/11 H 21 MN 47/PREANALYSIS CREATION
@PRE=4 76,PREA=12,TRAD=4,DIS=RB,RCA=4,RCE=2;
PROCESSING TPREIN ACC
PREA = 12
PRE = 476
TRAD = 04
DIS = RB
RCA = 04 RCE = 02
PROCESSING TPREIN EXC
@PREIN:
CEN=1/03-02-21/11 H 22 MN 55/PREANALYSIS CREATION
@PRE=21 4,PREA=11,TRAD=10,RCA=5,RCE=4,CHA=21;
PROCESSING TPREIN ACC
PREA = 11
PRE = 214
TRAD = 10
RCA = 05 RCE = 04 CHA = 21
PROCESSING TPREIN EXC
Where
Discrimination RB in the preanalysis in inserts the carrier code received in the TNS field
in the IAM message.
@PRECR:
CEN=1/03-02-21/12 H 12 MN 23/PREANALYSIS CREATION
@PRE=010 20,PREA=1 PRES=11,RCA=6,RCE=6,CHA=200,DIS=ISTA:
PROCESSING TPREIN ACC
PREA = 01
PRE = 01020
PRES = 11
DIS = ISTA
RCA = 06 RCE = 06 CHA = 200
PROCESSING TPREIN EXC
@PRE=200,PREA=11,TRAD=9,RCA=7,RCE=4,CHA=20;
PROCESSING TPREIN ACC
PREA = 11
PRE = 200
TRAD = 09
RCA = 07 RCE = 04 CHA = 20
PROCESSING TPREIN EXC
Where –
DIS=RA inserts the carrier code received in the TNS field in IAM message.
@PRECR:
CEN=1/03-02-21/12 H 40 MN 05/PREANALYSIS CREATION
@PRE=9510 22,PREA=1,PRES=11,RCA=7,RCE=7,CHA=2295,DIS=ISTA;
PROCESSING TPREIN ACC
PREA = 01
PRE = 951022
PRES = 11 DIS = ISTA
RCA = 07 RCE = 07 CHA = 2295
PROCESSING TPREIN EXC
@PRECR:
CEN=1/03-02-21/12 H 40 MN 23/PREANALYSIS CREATION
@PRE=22 95,PREA=11,RCA=5,RCE=5,CHA=22,TRAD=11;
PROCESSING TPREIN ACC
PREA = 11
PRE = 2295
TRAD = 11
RCA = 05 RCE = 05 CHA = 22
PROCESSING TPREIN EXC
Where
9510 is the access code for regional carrier
22 is the carrier code for a regional carrier
@PREIN:
CEN=1/03-02-21/12 H 41 MN 01/PREANALYSIS INTERROGATION
@PRE=177,PREA=12;
PROCESSING TPREIN ACC
PREA = 12
PRE = 177
TRAD = 01
DIS = RC
RCA = 04 RCE = 02
PROCESSING TPREIN EXC
@PREIN:
CEN=1/03-02-21/12 H 41 MN 14/PREANALYSIS INTERROGATION
@PRE=22 1,PREA=11;
PROCESSING TPREIN ACC
PREA = 11
PRE = 221
TRAD = 11
RCA = 05 RCE = 04 CHA = 22
PROCESSING TPREIN EXC
Where DIS = RC inserts the carrier code received in the TNS field in the IAM message.
2. Create the outgoing routings to the carrier’s exchange or a transit exchange, using the
ACHCR command –
@ACHCR
CEN=1/03-02-21/11 H 21 MN 00/ROUTING CREATION
@ACH=903,TYPE=1,NFSC=CAR5,RCR=10,AC=4-0,RPCE=3,DIS=C+TR+TNS;
PROCESSING TGPAIN ACC
ACH= 0903 TYPE= 01 NFSC= CAR5 RCR= 10
AC= 04-00 RPCE= 03
DIS= C+TR+TNS
@ACHIN:
CEN=1/03-02-21/12 H 40 MN 49/ROUTING INTERROGATION
@ACH=991;
PROCESSING TGPAIN ACC
ACH= 0991 TYPE= 01 NFSC= CAR1 RCR= 09
AC= 01-00 RPCE= 03
DIS= C+TR+TNS
Where –
TNS is the discrimination assigned on the ACH to send the carrier code in the TNS field
in the ISUP message.
@INDCR
CEN=1/03-02-21/11 H 20 MN 18/ANALYSIS CREATION
@IND=21,TRAD=10,RCMI=3,RCMA=15,ACHN=903-1<64,PTXN=11-1<128;
PROCESSING TGAIIN ACC
TRAD = 10
IND =21
RCMI = 03 RCMA = 15
CIA = 1+< 64
ACH= 0903
CIX = 1< 64
+ 65<128
PTX= 11
VALIDATION?
Y;
PROCESSING TGAIIN EXC
@INDCR
CEN=1/03-02-21/12 H 14 MN 55/ANALYSIS CREATION
@IND=20,TRAD=9,RCMI=3,RCMA=16,ACHN=901-1<64,PTXN=11-1<128;
PROCESSING TGAIIN ACC
TRAD = 09
IND =20
RCMI = 03 RCMA = 16
CIA = 1< 64
ACH= 0901
CIX = 1< 64
+ 65<128
PTX= 11
VALIDATION?
Y;
PROCESSING TGAIIN EXC
@INDCR:
CEN=1/03-02-21/12 H 40 MN 34/ANALYSIS CREATION
@IND=22,TRAD=11,ACHN=991-1<64,PTXN=11-1<128,RCMI=3,RCMA=12;
PROCESSING TGAIIN ACC
TRAD = 11
IND =22
RCMI = 03 RCMA = 12
CIA = 1< 64
ACH= 0991
CIX = 1< 64
+ 65<128
PTX= 11
VALIDATION?
Y;
PROCESSING TGAIIN EXC
The carrier preselection function allows the local loop operator’s subscribers to choose
another operator to be automatically selected to route their long distance or international
calls without it being necessary to dial a prefix on every call. The users can still select
another carrier on a per call basis using a prefix . Outside the local sorting area the calling
subscriber’s call is routed by the preselected carrier.
The carrier is specified by the preselection categories assigned to the calling subscriber’s
line, TRAi, TRBj and TRCk, or, if these categories are not present, by the TRDAi,
TRDBj and TRDCk parameters in the FIPAM file.
TRDAi, TRDBj and TRDCk are optional parameters. If they are unspecified, and
if the subscriber’s line does not have the TRAi, TRBj or TRCk category, there is no
default preselection.
In addition to the set-up conditions explained in section 1.1.3 the following manufacturer
operations must also be carried out in the FIPAM file:
Correctly setting the TRDAi (TRDBj, TRDCk) parameters to indicate a default carrier
number if there is no preselection category. Unlike carrier selection on a per call basis,
for carrier preselection, the carrier’s digits are automatically added during subscriber
preanalysis (FPREA file) if it has the discrimination DIS = RA (RB, RC). For the
carrier’s digits to be added, the TRDA1, TRDA2, TRDA3 and TRDA4 parameters must
be correctly set by the manufacturer. For a carrier number with 2 digits, XY, these
parameters must be set as follows:
For National Calls create the preanalysis discrimination RA, using the PRECR command
PREA=1,PRE=0Z,TRAD=TRADnat,RCE=2,RCA=3,DIS=RA;
Where:
RA is for automatically adding the digits of the carrier number after subscriber
preanalysis,
National TRADnat is the number of the analysis table in which numbers
dialed in national format are analyzed.
@PRECR:
CEN=1/03-02-21/12 H 13 MN 19/PREANALYSIS CREATION
@PRE=077,PREA=1, TRAD=2, RCE=2,RCA=3,DIS=RA;
PROCESSING TPREIN ACC
PREA = 01
PRE = 077
TRAD = 02
DIS = RA
VALIDATION?
Y;
RCA = 03 RCE = 01
PROCESSING TPRECR EXC
For international Calls create the preanalysis discrimination RB, using the PRECR
command
PREA=1,PRE=00,TRAD=TRADinter,RCE=3,RCA=4,DIS=RB;
Where:
RB is for automatically adding the digits of the carrier number after subscriber pre-
analysis, international
TRADinter is the number of the analysis table in which numbers dialed in international
format are analyzed.
@PRECR:
CEN=1/03-02-21/12 H 13 MN 19/PREANALYSIS CREATION
@PRE=0076,PREA=1, TRAD=4, RCE=3,RCA=4,DIS=RB;
PROCESSING TPREIN ACC
PREA = 01
PRE = 0076
TRAD = 04
DIS = RB
RCA = 03 RCE = 03
VALIDATION?
Y;
PROCESSING TPRECR EXC
For regional Calls create the pre-analysis discrimination RC, using the PRECR
command
PREA=1,PRE=AB,TRAD=TRADreg ,RCE=2,RCA=3,DIS=RC;
Where:
RC is for automatically adding the digits of the carrier number after subscriber pre-
analysis, regional
TRADreg is the number of the analysis table in which numbers dialed in regional format
are analyzed.
@PRECR:
CEN=1/03-02-21/12 H 13 MN 19/PREANALYSIS CREATION
@PRE=9577,PREA=1, TRAD=1, RCE=1,RCA=4,DIS=RC;
PROCESSING TPREIN ACC
PREA = 01
PRE = 9577
TRAD = 01
DIS = RC
RCA = 03 RCE = 01
VALIDATION?
Y;
PROCESSING TPRECR EXC
2. Assign the TRAi, TRBj and TRCk categories to the subscriber lines identified by
their ND (designation number), using the ABOMO command :
ABOMO:
CEN=1/99-10-13/20 H 50 MN 15/MODIFY LINE CLASS OF SERVICE
ND=ABPQMCDU,TY=KLA,CAT=TRAi+TRBj+TRCk;
Where:
A is national traffic,
B is international traffic,
C is regional traffic,
i is the carrier number pre-selected for national traffic
j is the carrier number preselected for international traffic
k is the carrier number preselected for regional traffic
TRAi is the pre-selection category of the national carrier assigned
to the subscriber line,
TRBj is the pre-selection category of the international carrier assigned
to the subscriber line,
TRCk is the pre-selection category of the regional carrier assigned
to the subscriber line.
@ABOIN:
CEN=1/03-02-21/11 H 50 MN 27/SUBSCRIBER CHARACTERISTICS INTEROGTN
@ND=6228017;
PROCESSING TGLAIN ACC
ND=6228017 NE =120-00-017
TAX = 00005268 + 00000000 + 00000000 + 00000000
TY= NBS1+PRAC3+ V52
CAT= NAT2+CLAB4+ TRA30+ TRB21+ TRC32
MAR=STX +ODDD+ODDA
NAP=15
CP = 1
PROCESSING TGLAIN EXC
The subscriber controlled carrier preselection function lets the subscriber change his or
her subscriptions to carriers without involving the local loop operator.
ACHCR:
CEN=1/02-11-02/10 H 05 MN 25/NEW ROUTING ADDITION
ACH=Aw,TYPE=16,CAR=TYFA027+TYPU01:
ACH=Ax,TYPE=16,CAR=TYFA027+TYPU02:
ACH=Ay,TYPE=16,CAR=TYFA027+TYPU03:
ACH=Az,TYPE=16,CAR=TYFA027+TYPU05:
Where:
TYFA027 is the carrier number for each subscription,
TYPU01 is the possible carrier modification for traffic A,
TYPU02 is the possible carrier modification for traffic B,
TYPU03 is the possible carrier modification for traffic C,
TYPU05 is the possible carrier modification for all types of traffic.
For data value information, refer to the Directory of customer application data
(REDA).
@ACHIN:
CEN=1/03-02-21/14 H 29 MN 19/ROUTING INTERROGATION
@ACH=36<38;
PROCESSING TGPAIN ACC
ACH= 0036 TYPE= 16
CAR= TYFA027+TYPU001
2. Create the routing codes used by the subscribers using the INDCR command
(see FOP INDCR-03):
For the routing codes used on keypad telephones:
INDCR:
CEN=1/02-11-02/11 H 35 MN 40/NEW ANALYSIS ADDITION
IND=136,TRAD=Tfac,ACHN=Aw-1<64,PTXN=Pfac-1<64,RDC=5:
IND=137,TRAD=Tfac,ACHN=Ax-1<64,PTXN=Pfac-1<64,RDC=5:
IND=138,TRAD=Tfac,ACHN=Ay-1<64,PTXN=Pfac-1<64,RDC=5:
IND=139,TRAD=Tfac,ACHN=Az-1<64,PTXN=Pfac-1<64,RDC=5:
Where:
IND gives the routing codes used by the subscriber to call the service.
Routing code 13 is, by convention, the sequence of digits dialed by the subscriber to
obtain the service.
@INDIN:
4. Assign the AMTRA, AMTRB or AMTRC categories to the subscriber lines desig-
nated by their ND (designation number) using the ABOMO command:
ABOMO:
CEN=1/01-11-02/11 H 55 MN 15/MODIFY LINE CLASS OF SERVICE
ND=ABPQMCDU,CAT=AMTRA;
Where:
AMTRA is authorization to modify the carrier number for traffic A,
AMTRB is authorization to modify the carrier number for traffic B,
AMTRC is authorization to modify the carrier number for traffic C.
@ABOIN:
CEN=1/03-02-21/14 H 30 MN 06/SUBSCRIBER CHARACTERISTICS INTEROGTN
@ND=6228017;
PROCESSING TGLAIN ACC
ND=6228017 NE =120-00-017
TAX = 00006323 + 00000000 + 00000000 + 00000000
TY= NBS1+PRAC3+ V52
CAT= NAT2+CLAB4+ TRA20+AMTRA+AMTRB+AMTRC
MAR=STX +ODDD+ODDA
NAP=15
CP = 1
PROCESSING TGLAIN EXC