Professional Documents
Culture Documents
www.jcbna.com
Fastrac commitment
Changing the face of agriculture
skid steer range
We start by listening to you. You told us you need greater productivity and performance The Fastrac models surpass every other machine on the market. But it doesn’t stop there. By
to increase your earning power. We bring you the new generation Fastrac. continually challenging accepted knowledge, we will keep on developing more effective machines
to overcome even more of the obstacles you face every day.
Not content to update existing models or concepts, we develop new solutions that meet your
needs, now and in the future. No other agricultural machinery manufacturer shows a greater
commitment to this than JCB.
The Fastrac concept Since it started production in 1991, the JCB Fastrac has
been continually evolving to meet new market demands.
However, the original Fastrac principles remain firmly intact:
Chassis
Meanwhile, the dynamic axle mounting system ensures they are raised and lowered. These machines maintain full
implements remain stable, isolated from ground conditions suspension travel at all times, preventing nose-lowering
which can limit productivity. The result? Higher in-field when lifting heavy front implements.
operating speeds and greater productivity.
fast facts The chassis design on the 7000 models supports this
All Fastracs feature load-compensating, hydro-pneumatic, advanced suspension set-up, along with the large capacity
n Full primary system gives smoother
self-leveling rear suspension. First the chassis is lowered in rear axle with 20,000 lb rear and optional 7,700 lb front 3
ride increasing efficiency and relation to the rear axle as weight is applied. Then the ride point linkage. The front of the all new 7000 series chassis is
eliminating power hop height corrector valves allow oil to flow in, pressurizing sculpted to give a tighter in-field turning radius.
n ‘Z’ section ladder-type chassis is the hydraulic cylinders, restoring ride height to the
extremely versatile, sculpted 7000 original level as well as increasing suspension stiffness to On all other Fastracs, you will find the fully welded,
chassis gives tighter turning circles accommodate the extra weight. Z-section chassis is designed to cope with the stresses of
modern farming without excessive increase in weight. This
n Self-leveling rear (and front on 7000
As load is reduced, ride height corrector valves allow the makes it better suited to carrying implements on a number
Series) suspension maintains consistent oil to flow out of the suspension cylinders, maintaining ride of mounting points.
ride height height to the pre-set level. So when water empties from
n Equal weight distribution provides a sprayer tank, for example, the suspension continually
reduced ground compaction and corrects itself, maintaining a constant height between the
develops maximum traction chassis and axle.
reverse and back again at the touch of a button. Power is fed from the engine to the 6 speed via a 3
fast facts speed powershift, allowing the operator to change speed
Selectronic is another JCB first and, with its ability to without interrupting drive. Add in the Autoshift function
n Smoothshift clutch requires low driver
combine range and direction changes, very easy to use. In and you can make these changes automatically under any
effort and boasts excellent service life this technically simple system, speed range (High, Medium load conditions. Autoshift allows you to automatically
n Soft-engage differential locks provide or Low) is pre-selected by twisting the steering column- select three different powershift ratios – snail, tortoise
true,100% four-wheel drive traction mounted selector lever, while moving the lever forward or and hare – while on the move and under load. Autoshift
n Selectronic allows pre-selection of backwards selects forward or reverse. Actual engagement also features 4 modes tailored to suit particular job types:
required gear range and direction does not take place until the clutch pedal is fully depressed trailer, plowing, PTO and user program mode. The change
or the Autoshuttle button is pressed and travel speed has points are directly linked to engine rpm and change the
n Autoshuttle provides an easy-to-use,
fallen to 2 mph or less. This protects the driveline and transmission ratios at different points on the rpm scale
effective alternative to the manual prevents inadvertent range or direction changes occurring at depending on specific requirements.
clutch pedal speed. Selectronic and Autoshuttle both improve operating
n Autoshift lets you make gear changes efficiency and leave the operator free to concentrate on the
automatically, under any load conditions implement when making headland turns.
D5
C6
C4
C3
C1
Gear
B6
B5
B3
B1
A6
A3
A1
0 10 20 30 40 50 60 70
Speed (mph)
transmission
Touchscreen Control The 3230 Xtra, 7000 Series and the 8250 Fastrac all come
with touchscreen control, putting you in complete charge
Also accessible via the touchscreen is the headland
management system, which allows the operator to
of the P-TRONIC AND V-TRONIC transmission features program a sequence of up to 15 operations, controlled at
for the most efficient and productive machine operation. the touch of a single button and includes the following:
The full-color touchscreen features a simple, extremely n Ability to store up to five sequences for various
easy-to-use layout which brings all of the controls into one implements
fast facts location for added comfort and convenience. n Single-button activation, with a button placed on the
n Headland management makes even joystick within easy reach
Using the touchscreen you can also set up the following:
the most complicated operations n Simple programming: just press the function required
n PTO, four-wheel drive, differential locks and area on the touchscreen; there is no confusion with trying to
simple meter record a number of functions
n Joystick auxiliary control buttons are n Joystick-controlled and auxiliary functions, including: n Ability to insert, modify or delete functions during
programmable via the touchscreen to - linkage raise/lower operation for maximum flexibility
suit your needs - hyd. valve operation
n Ability to link functions together with a timing feature or
n Touchscreen design is easy to navigate - PTO engage/disengage
to step through the process with a single button press
for speed and simplicity of use - touchscreen configuration, language, brightness, etc
- diagnostic information n Option to pause, restart and skip through sequence if
n Touchscreen allows you to change necessary, so with the simple touch of a screen, it’s quick
n Worklights: simply select the required worklights on
between transmission modes according and easy to tailor the 8250, 7000 Series and 3230 Xtra
the screen and switch on and off with the master
to the application Fastracs to whatever task you have to do
switch
n Tractor functions can also be easily n Hydraulic time and flow control: program the time
adjusted through the touchscreen and flow settings for each individual valve
The Fastrac front suspension configuration has been True tracking: the front and rear axles follow the same
designed to allow the tightest possible turning radius. You line for minimal wheel tracks and crop damage. Both axles
fast facts will be amazed at the turning performance you get with only steer simultaneously as the operators turns the steering
two-wheel steer. wheel.
n JCB Quadtronic on the 2000 Series
creates the only 4 wheel steer fully 2000 Series Fastracs feature hydrostatic twin-ram steering Delay: the front wheels can be turned to 15° with the rear
suspended tractor to achieve maximum steer torque with minimum driver wheels remaining straight to ensure the back end, together
n Improved turning circle on 7000 Series effort. As for 3230 Xtra, 7000 Series and 8250 machines, with any trailed implement, doesn’t swing into any parallel
enhances maneuverability because of the extra safety requirements of higher-speed crop. Once 15° is exceeded, the rear axle begins to steer
n Power steering systems are responsive travel, they use a mechanical steering system with power and reaches full lock simultaneously with the front axle.
assistance for superb controllability and driver feedback
for precise control
at any speed on any ground conditions. To further reduce Crab steer: useful on hillsides where inclines can cause the
n Variable ratio steering on 8250 and driver effort on the 7000 Series and 8250, an assistor ram machine to slip sideways, and when driving close to a fence
7000 Series gives both precise steering complements the power steering. where it is possible to move away without first swinging
at speed and responsive headland closer to the fence.
turning Available on the 2155/2170, JCB Quadtronic has enabled
n Compact dimensions allow you to this Fastrac model to become the worlds only four- five instantly selectable steering modes
wheel-steer, fully suspended tractor. This unique, highly
maneuver in tight spaces
maneuverable system features the following steering modes:
Hydraulics Power and control when you need them. Fastrac hydraulics
ensure the operator always has the right option to hand,
implements that use their own hydraulic control valve. This
allows the implement control valve to automatically demand
whatever the implements. oil when required. When no oil is required the pump stops
generating oil flow, saving fuel and wear, and preventing
The 8250, 7000 Series and 3230 Xtra Fastracs feature a load excessive heat generation in the hydraulic system.
sensing variable displacement auxiliary hydraulic system as
fast facts standard, the 3230 Xtra and 7000 series are fitted with a On the 2000 Series, there is also the option of a hydraulic
37 gpm piston pump. The 8250 is fitted with class-leading flow divider. Ideal for powering hydraulic motors, this gives
n High capacity (13200 – 22000 lb) rear
maximum flow of 55 gpm (optional on the 7000 series). an uninterrupted, accurate hydraulic feed to any implement
linkages These machines boast big capacity, flow-on-demand of up to 23 gpm.
n High-output hydraulic systems are hydraulics with 26 or 37 gpm flow out a single spool valve.
extremely responsive The rear linkage on all Fastracs uses Bosch Hitchtronic
n Auxiliary services incorporate time and The 2000 Series models feature fixed displacement digital control to help maintain precise control of
flow control (3230 Xtra and 8250 and hydraulic pumps that develop 27 gpm. All models, have implement height, working depth, lowering speed and
additional hydraulic pumps provide oil for steering, general response. Plus, wheel slip control is available with
7000 Series)
suspension, PTOs and difflocks. the optional performance monitor, allowing maximum
n Proven Bosch Hitchtronic system helps productivity to be achieved even in the toughest conditions.
maintain precise control All Fastracs can be fitted with three or four 4-position
n Optional electronic front linkage (3230 double-acting zero-leak spool valves, which feature a float All Fastrac models are available with, an optional, category
Xtra, 7000 Series and 8250) increases position. Plus, a separate hydraulic tank for auxiliary services 2 front linkage. On the 3230 Xtra, 7000 series and 8250
versatility means there is no danger of oil contamination. The 3230 the linkage has the luxury of electronic controls, with both
Xtra Series, 7000 Series and 8250 also feature electronically single and double actuation at the flick of a switch, as well as
controlled spool valves which let you adjust time and flow height, depth and linkage operating speed controls.
for automatic control of implements.
2
6
4
2155 & 2170 walkaround
1 engine 4 WHEELS/TIRES/TRANSMISSION
3 CHASSIS 6 HYDRAULICS
n Unique front and rear axle suspension with hydro- n 27 gpm max hydraulic flow
pneumatic rear self-leveling
n Hydraulic oil separate from transmission
n Robust endurance-tested steel structure
n 4 hydraulic services available to the rear
n External disc brakes
n High quality powder-coated paint finish
n Optional Quadtronic 4 wheel steer for tight headland
turns
5
2
6
4
3000 walkaround
1 engine 4 WHEELS/TIRES/TRANSMISSION
n 6.7 liter Cummins Common-rail engine in 220 hp n High speed rated tires
n Over 95% of maximum torque at just 1000 rpm n Equal size tires gives improved traction
n Easy to clean folding cooling pack n P-TRONIC transmission for effortless, clutch-less
n Single piece hood for service and maintenance access gear shifts
n 92 gallon fuel tank enables long days without refilling n Full color touch screen control
n Intuitive joystick control
n Automatic control for optimum performance
3 CHASSIS 6 HYDRAULICS
n Unique front and rear axle suspension with hydro n 37 gpm maximum hydraulic flow
pneumatic rear self leveling n Electronic spool valve with flow and time control
n Z section ladder chassis n Hydraulic oil separate from transmission
n External disc brakes n 4 hydraulic services available to the rear
n ABS braking system n Touch screen control
n High quality powder-coated paint finish
5
6
3
4
7000 walkaround
1 engine 4 WHEELS/TIRES/TRANSMISSION
n Light action, easy open hood provides excellent access n Large rear tires for maximum traction
for service and maintenance n Wide range of tire options
n Powerful Cummins QSB6.7 liter common rail engines n P-TRONIC transmission for effortless, clutch-less
with exceptional torque back-up gear shifts
n Full color touch screen control
n Intuitive joystick control
n Automatic control for optimum performance
n Color touch screen controlling hydraulic, transmission n Forward bias cab with slim line dash for optimal vis-
and electronic functions of the tractor ibility and comfort
n Clear layout for ease of operation n Air suspended drivers seat with ergonomic armrest
n Headland management system for control of repeti- controls
tive functions n Full size passenger seat
n Fully automatic climate control as standard
n Improved weight distribution and reduced compac- n 37 gpm maximum hyd oil flow (optional 55 gpm)
tion from full chassis design n 20,000 lb rear lift capacity
n Sculpted, laser profile design allows wheels to tuck in n Electronic spool valves with on screen flow and time
tight against chassis controls
n Self levelling front and rear suspension
n Optional 7700 lb front linkage
n Optional single front PTO
5
6
3
4
8250 walkaround
1 engine 4 TIRES/Suspension
n Powerful max 280 hp Cummins QSC n Larger rear tires for excellent rear axle load capacity
n Near 50/50 weight distribution maximizes tire
n 1100 Nm of torque across 65% of speed range
performance
n Peak of 1179 Nm of torque
n ABS braking system for highest safety
n 160 gallon fuel tank enables long days without refilling n All tires speed rated for 44 mph
n Unique full suspension system
n Front coil spring and damper suspension
n Rear hydro-pneumatic, self-levelling suspension with
ride height control
n Suspension improves traction and offers class lead-
ing comfort
n Color touch-screen used to control transmission and n Forward bias of cab provides unrivalled comfort and
auxiliary functions visibility
n Allows tractor to be easily set up for specific tasks n Air-suspended driver seat
n Intuitive operations are easy to learn n Full size passenger seat
n Clear layout for ease of operation n Low noise and vibration levels
n Air conditioning as standard
Gross engine power hp (kW) 150 (116) @ 2200rpm 170 (127) @ 2200rpm 220 (164) @ 2200rpm
Max torque @ engine rpm Nm 641 @ 1500rpm 675 @ 1300rpm 949 @ 1500rpm
Maximum rear lift capacity lb (kg) 13,230 (6,000) 6,000 (13,230) 17,640 (8,000)
193 (166) @ 2200rpm 220 (164) @ 2200rpm 260 (164) @ 2200rpm 280 (209) @ 1900rpm
4 wheel disc brakes with ABS 4 wheel disc brakes with ABS 4 wheel disc brakes with ABS 4 wheel disc brakes with ABS
about JCB Cyril Bamford, we have grown into the world’s biggest privately
owned heavy equipment company by volume. Since 1945, the
customers have been a vital part of our history and will be key to
our sustainable future. But in addition to developing cleaner and
same attention to detail, passion for progress and family spirit has more efficient machines, we have a commitment to ensuring our
taken us from strength to strength. Nowadays, JCB operates across manufacturing facilities meet the highest environmental standards.
all five continents, manufacturing at 18 factories in the UK, Brazil,
Germany, China, North America and India. With 1,500 dealerships A commitment to our customers that goes on.
and depots selling and supporting our products in over 150 coun- That’s a fact we remind ourselves of constantly, and it’s the reason
tries, we are one of the top three manufacturers of construction our customers are at the heart of everything we do. Whatever a
equipment with some of the finest engineering facilities in the world. customer needs, we make it our mission to provide world-class
support and 100% satisfaction. At the heart of this is a dedication
A history of world-class innovation. to minimizing machine downtime. So our state-of-the-art World
Our business has always been driven by innovation, using only the Parts Center dispatches more than a million genuine parts and
Sir Anthony Bamford, the son of Mr.
most advanced technology, components and processes, meticulous attachments every week, with an
JCB, still runs the company today.
design and rigorous testing. Evidence of this doesn’t come much ‘Anywhere in 24 hours’ strat-
more powerful than our revolutionary JCB Dieselmax engine. egy. Our JCB-trained technicians
Having grabbed the headlines when it smashed the world land provide excellent, expert customer
speed record at 350.092 mph, it is now providing our customers care, whether it’s routine servicing
with tomorrow’s performance today. or something more urgent.
www.JCBdirt.com