Professional Documents
Culture Documents
60 New Features
PlantFLOW PlantFLOW
PULS PULS
FEA
Equipment Limits e.g. Pumps, Turbines, Boilers, Compressors
Vessel Design
WinNOZL WinNOZL
AutoPIPE AutoPIPE
Design Report
Isos
Marked-Up Drawing
STAAD STAAD
Main Screen
Interoperability
Contractor running older version? Analyze newer model in older version? Now save newer 2004 (v8.5+) models back to older 6.3 version
Piping Codes
Updated and new Codes
Allow user-defined B1 & B2 factors for ASME NC & ND piping codes Update ASME B31.8a-2000 piping code to B31.8-2003 edition Added ASME NC & ND 1992 piping code Update B31.1 piping code to 2004 edition Added ASME B31.1 piping code 1992 edition Update ASME III NC & ND :2001 piping code to 2004 edition Apply limit check of 1.5xSy for occasional allowable stress for ASME NC, ND Added stress category for single non-repeated anchor movements for ASME NC,ND Added branch connection tee type to ASME NC & ND piping codes Added branch & run moments summation method per NB-3683-1(d) for ASME NC & ND piping codes
Analysis
Envelope response spectra for maximum response on the piping system
Analysis
New modal summation methods for response spectrum analysis
Signed DoubleSum and Signed CQC methods have an advantage over other methods when combining systems with symmetric mode shapes.
Combinations
Edit or Create New Combinations without leaving the dialog
Graphics
New Toolbar Icons
Toggle Large cursor to find the current point in a large model Toggle Beam Names On/Off for clearer Plot
Graphics
Viewports are saved switching between Single/Double/Quad but also after closing then reopening the model
Graphics
Printed Graphics plots with Filename, Company name, Model version and any Project information
Input Grids
New Beam Grid Check & make global changes to Beam size, type and material quickly
Input Grids
Added ANSI Flange check to Flange Grid
Input Grids
New Soil and Soil ID Grid Check & make global changes to Soil Properties quickly
Drag Soil ID to Apply Soil to new Range or change soil spacing
Input Grids
New Input Grid features
Option to not show Zeros = easier to review input data Option to show column Headings + Hide/Unhide
Slide point or component along pipe OR move downstream piping Print all data on one Page
Input Grids
Only show Grid data for Visible Segments = easier to check and modify the data for LARGE models
Input Grids
Use Tee Grid as SIF Calculator
Change the Tee Type = Code Tee SIF automatically re-calculated
Input Grids
EN13480 and BS7159 Pipe properties editable
Input Grids
Supports and Xtra Data on Frames shown in Grid
Libraries
New Spring Manufacturers
Modeling
Option to set default upward gap for V-stops and guides & support gap setting
Modeling
Reports
Clearer Pass/Fail on Equipment Reports
Input Grids
Save and restore size and position of Input Grids window on startup
Libraries
Added WAVISTRONG GFK FRP manufacturer to the AUTOFRP library Enable BS7159 piping code to read custom FRP libraries
Modeling
Added option to override the BS7159 pressure multiplier
Reports
Provide clear pass/fail indication in the rotating equipment reports Added frame points to acceleration reports