Professional Documents
Culture Documents
DATA SHEET
book, halfpage
M3D186
Philips Semiconductors
Product specication
BRY56A
anode a g gate
book, halfpage
2 3
k cathode
MGL167
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VGA IA(AV) IARM IASM dlA/dt Ptot Tstg Tj Tamb PARAMETER gate-anode voltage average anode current repetitive peak anode current rate of rise of anode current total power dissipation storage temperature junction temperature operating ambient temperature tp = 10 s; = 0.01 IA 2.5 A Tamb 75 C non-repetitive peak anode current tp = 10 s CONDITIONS 65 65 MIN. MAX. 70 175 2.5 3 20 300 +150 150 +150 V mA A A A/s mW C C C UNIT
1999 May 31
Philips Semiconductors
Product specication
BRY56A
UNIT K/W
CHARACTERISTICS Tamb = 25 C unless otherwise specied. SYMBOL IP IV Voffset IGAO IGKS VAK VOM tr PARAMETER peak point current valley point current offset voltage gate-anode leakage current anode-cathode voltage peak output voltage rise time CONDITIONS VS = 10 V; RG = 10 k; see Fig.7 VS = 10 V; RG = 100 k; see Fig.7 VS = 10 V; RG = 10 k; see Fig.7 VS = 10 V; RG = 100 k; see Fig.7 typical curve; IA = 0; see Fig.7 IK = 0; VGA = 70 V; see Fig.5 IA = 100 mA VAA = 20 V; C = 10 nF; see Figs 8 and 9 VAA = 20 V; C = 10 nF; see Fig.9 2 1 6 MIN. TYP. MAX. 200 60 10 100 1.4 80 UNIT nA nA A A V nA nA V V ns
VP VS
+40 V BZY88C8V2
5 k
R1 750 40 K
1 nF D.U.T 10 k 20 osc.
RG
VS
MBK189
IP and IV determined by value of R1. 1 R1 = ---- ; i.e. maximum voltage drop over R1 = 1 V. IA Internal resistance of oscilloscope = 10 M.
1999 May 31
Philips Semiconductors
Product specication
BRY56A
handbook, halfpage
+VB
handbook, halfpage
IA RG = VAK VS = R1 R2 R1 R2 VB
R2 DUT R1
DUT
R1 R1 R2
MBB699 MEA141
handbook, halfpage
DUT I GAO
handbook, halfpage
I GKS DUT
VGA
VGK
MBB697
MBB696
Fig.5
Fig.6
1999 May 31
Philips Semiconductors
Product specication
BRY56A
IA handbook, halfpage
handbook, halfpage
VAA
1.5 M DUT
16 k
VO 20 27 k
MBB698
handbook, halfpage
VO
MBB701
VOM 90 %
10 % tr time
1999 May 31
Philips Semiconductors
Product specication
BRY56A
SOT54
E d A L b
1
D
e1 e
3
b1
L1
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 5.2 5.0 b 0.48 0.40 b1 0.66 0.56 c 0.45 0.40 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1) 2.5
Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 EIAJ SC-43 EUROPEAN PROJECTION ISSUE DATE 97-02-28
1999 May 31
Philips Semiconductors
Product specication
BRY56A
This data sheet contains target or goal specications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains nal product specications.
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specication is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specication. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
1999 May 31
For all other countries apply to: Philips Semiconductors, International Marketing & Sales Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 Philips Electronics N.V. 1999
Internet: http://www.semiconductors.philips.com
SCA 65
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
115002/01/pp8