You are on page 1of 1

Lifeboat launching procedures checklist Actions

Detach all lashing lines Set bottom plugs Fasten the painters and the tricings pendants Remove off the gradle stoppers Disconnect recharging batteries plug/cable Deploy embarkation ladder Raise the handbrake lever and lower to the embarkation deck Boarding to the lifeboat/count persons on board using crew list Loosen and then Remove the pendants lines Raise the handbrake lever and lower to the surface Release the boat fall-blocks Boarding the remained crew to the lifeboat/again count persons on board using crew list Start up the engine Let go the painter and go away

Checked

You might also like