You are on page 1of 52

9500 MPR (Microwave Packet Radio)

R4.2

Agenda

1. Configurao Inicial
2. Configurando do Radio 9500MPR
3. Preparando o sistema
4. Configurando a ODU
5.Cross- conexo
6.Conexo atravs de VLAN

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurao inicial

3 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando o computador
Conectar a porta de rede do computador na porta Mgmt Port.
Deixar a Configurao de rede do computador em DHCP.

4 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Acessando o Radio 9500MPR


Duplo click no icne abaixo que est na area de trabalho do computador:

MPR TCO R4.10


9500 MobileWebEML
Packet
Radio Concepts

Selecionar a porta de rede do computador com ip 10.0.1.3:

5 | Presentation Title | Month 20014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Acessando o Radio 9500MPR


Click em OK:

6 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Acessando o Radio 9500MPR


Digitar o Login Name e Password:

Login Name:
initial

Password:
adminadmin

7 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Multi-service Aggregation Layer

The Alcatel-Lucent 9500 MPR aggregates and carries TDM 2G, 3G and IP/Eth over a COMMON
PACKET LAYER. This allows sharing a common packet transmission infrastructure, regardless of the
carried traffics nature.
Due to the nature of Ethernet, each service can be discriminated based on several parameters,
including quality of service.

Access network

Packet Backhaul network

Configurando oEthernet
Radio
9500MPR
aggregation layer

Any TDM/Ethernet interfaces


nxE1
GSM

2G

9500 MPR
Aggregated traffic
over Ethernet

ISAM,
WIMAX

Ethernet
3G

HSDPA
Voice on R99

nxE1

Single technology throughout the network: Ethernet as convergence layer


8 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando o Radio 9500MPR

Inserir o nome do site e a


localizao e click Apply

Para entrar no Radio


click Show

9 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando o Radio 9500MPR


Selecione o slot com a placa presente, escolha o modelo e click Apply.

10 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando o Radio 9500MPR


Continuar as configuraes somente aps as placas ficarem com os leds
verdes.

11 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando o Radio 9500MPR


Configure o local IP ADDRESS:

12 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando o Radio 9500MPR


Insira o novo endereo fornecido e click Apply:

Click OK

13 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando o Radio 9500MPR


Entre com o novo endereo fornecido e click OK:

Entre novamente com


Login e Password
14 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema

15 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurao da Port# 4 TMN Ethernet:

Duplo click na
placa CORE

Broadcasting
Mobile TV

16 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Selecione TMN Interface e click na porta:

Habilite Enabled

Inserir as informaes de
acordo com o projeto e
click Apply.

17 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando IP Static Routing:

18 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando IP Static Routing:

Inserir as informaes de
acordo com o projeto.

Click Create

19 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando OSPF AREA:

20 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando OSPF AREA:

Habilitar new
Inserir as informaes de
acordo com o projeto.

Click Create

21 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando NTP:

22 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando NTP:
Habilitar Enable

Inserir as informaes de
acordo com o projeto.

Click Apply

23 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando DHCP:

24 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando DHCP:

Selecionar Enable

25 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando VLAN:

26 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Configurando VLAN:

Selecionar

27 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Click Apply

Preparando o sistema
Configurando QoS :

28 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Preparando o sistema
Selecionar QoS Classification :

Selecionar QoS
IEEE 802.1p

Click Apply
29 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando a ODU

30 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando a ODU
Selecionar a placa MPT:

Selecionar a porta
que ser utilizada.

Escolher o tipo
de ODU que ser
instalada.

31 | Presentation Title | Month 2014

Click Apply

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando a ODU
Aguardar aparecer ODU, dar duplo click na ODU ou na placa MPT:

32 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando a ODU
Ativar a alimentao da ODU:
Click Aqui

33 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando a ODU
Selecione tipo de fonte que ser utilizada:

Click Apply

Click Yes

- - QMA para fibra ptica.


- - PFoE para cabo LAN

34 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando a ODU
Aguarde at aparecer informaes sobre a ODU;

35 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Configurando a ODU
Preencha as informaes de acordo com o projeto;

Click Apply
36 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross-conexo

37 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross-conexo
Selecionar a placa E1 e dar duplo click:

38 | Presentation Title | Month 20014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross-conexo
Selecionar a porta:

Click Apply

All Rights Reserved Alcatel-Lucent 2008, XXXXX


39 | Presentation Title | Month 2014

Selecione
Unframed

Cross-conexo
Inserir o Flow Id e Deixar service profile TDM2TDM:

Click Apply

40 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross-conexo
Entrar na opo cross connections:

41 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross-conexo
Arraste o mouse da placa de E1 at a ODU;

42 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross-conexo
Arraste o mouse da placa de E1 at a ODU;

Selecione o E1

Click OK

43 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross-conexo
Click Apply;

Click Apply

44 | Presentation Title | Month 2008

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross atravs de VLAN

45 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross atravs de VLAN


Ativando as portas Ethernets:

Dar duplo click no


slot que contem as
portas ethernets.

46 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross atravs de VLAN


Habilitando as portas Ethernets:

Click Apply
Selecione

47 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross atravs de VLAN


Configurando as portas Ethernets:

Selecione

Click Apply
Selecione

48 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross atravs de VLAN


Entrar na opo VLAN configuration:

49 | Presentation Title | Month 20


2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross atravs de VLAN


Click na opo New:

Click New

50 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross atravs de VLAN


Click na opo New:

Coloque o VLAN ID
e a VLAN Name

Escolher as portas
que sero utilizadas.

51 | Presentation Title | Month 2014

Click OK

All Rights Reserved Alcatel-Lucent 2008, XXXXX

Cross atravs de VLAN


Click OK:

52 | Presentation Title | Month 2014

All Rights Reserved Alcatel-Lucent 2008, XXXXX

You might also like