You are on page 1of 17

Welcome to our

Presentation

Group 15 ( TE-10th batch) 1 5/24/17


Application of Computer in Spinning .

Presented
By:
Submitted To:

Md. Delwar Hossain


Student ID: Assistant Professor
145057 Department of Textile
145058 Engineering
145059 DUET,Gazipur -1700
145060

Group 15 ( TE-10th batch) 5/24/17 2


Outline Of Presentation
Introduction
General information of spinning
Discussion on application of computer
in different spinning process
Software in spinning
Conclusion

Group 15 ( TE-10th batch) 3 5/24/17


Introduction:

It was before 5000 B.C when human started spinning threads and making
fabric . The two of the oldest technologies that mankind invented . However
the fundamental work in spinning section has not change between then and
now .
But day by day the process is developed to reduce time and cost and improve
the quality of product. Recently this development increases very fast by using
Computer .Now a days maximum industries use several types of computerized
machine in each section .

Group 15 ( TE-10th batch) 4 5/24/17


General Information:

Spinning:Spinning is a process in which fibers are converted into yarn


by passing through certain processes.
Processes are:-
Blow room
Carding
Drawing
Lap-former
Combing
Simplex
Ring frame
Winding
5/24/17 5

Group 15 ( TE-10th batch)


Discussion on application of computer in different spinning process.

Blow
room

Winding Carding

Draw
Spinning Computer
frame

Lap
Simplex
former

Combing

6
Group 15 ( TE-10th batch) 5/24/17
Blow room

Opening

Cleaning
Opening Cleaning
Mixing

5/24/17 7

Group 15 ( TE-10th batch)


Mixing
Carding

As usually cleaning & mixing

Automatically Draft control and fault


identification.
Digital display

Group 15 ( TE-10th batch) 8 5/24/17


Draw frame

Drawing
Drafting
Auto leveling
Programmable
speed change

Digital display

5/24/17 9

Group 15 ( TE-10th batch)


Lap former

Automatically
control
applied load
Automatically
maintain
speed .
Ensure little
CV% all over
the lap
Ensure
constant butt
weight.

5/24/17 10

Group 15 ( TE-10th batch)


Combing
automatic lap
piecing system..
Reduction of
downtimes and
operators
effort
Automatically
control of noil
extraction .

5/24/17 11

Group 15 ( TE-10th batch)


Simplex/Roving frame

Automatically
control of
various speed
by survo motor.
Automatic
Tension Control
by CCD Sensor

Computer
Monitoring
Device

12
5/24/17

Group 15 ( TE-10th batch)


Ring frame
To control
evenness.
To joint
automatically
broken yarn.
To control
machine speed
automatically.
Automatically
control of
draft & TPI.

Group 15 ( TE-10th batch) 13 5/24/17


Winding
Control thick & thin
place automatically
Auto splicing.
Auto feeding &
doffing.
Auto speed control.
Control yarn tension
automatically.

5/24/17 14

Group 15 ( TE-10th batch)


Software use in Spinning

Maintaining HR department.
Simplesoft - Spinning Mill
Cost parameters can be Management Software (ERP)
optimized.
Amplitex - Integral Amplitex
Waste Management
Bale Management System Binary Software Solutions - Yarn
Financial Management Master [Software for Yarn Brokers,
Agents, Traders]
Store Management

Raises invoice for Yarn & GoldScape Solutions - Spinsoft


Waste.
Group 15 ( TE-10th batch) 5/24/17 15
Besides of these there have a lot of space of
computer application in spinning industry such
as (strength, trash, micronaire value, maturity,
sliver quality, yarn quality, count etc.)test
and its application is growing up day by day.

Group 15 ( TE-10th batch) 5/24/17 16


THANK YOU
Group 15 ( TE-10th batch) 5/24/17 17

You might also like