Networks based on Soft-Computing Optimization Muhammad Royyan1 and Dong-Seong Kim2 1Dept. of IT Convergence Engineering, Kumoh National Institute of Technology, Korea 2Department of Computer Software Engineering, Kumoh National Institute of Technology, Korea 1royyan@kumoh.ac.kr, 2dskim@kumoh.ac.kr
Introduction Proposes a path routing algorithm that enhances throughput based on CANFIS-GA.
The combination of adaptable fuzzy
inputs with a neural network (ANN) to have a rapid and more accurate predictor. Fig. 1 Multi-layer back- GA is used to optimize ANN potential. propagation network with one hidden layer of units
The target goal of learning is highest Back propagation
throughput possible based on three inputs is chosen because which are energy level, distance, and learning method connectivity degree. based on target The weight of each aspect will be which is highest achieved by ANN based on highest Fig. 2 Flowchart of Back- achieved throughput. propagation throughput possible.
Result and Discussion
In this section, the result
of proposed idea is discussed. The proposed Fig. 3 CANFIS architecture. idea is compared to another three conventional methods such as ETT, ETX, and HOP. Layer 3: Includes the fixed node labeled Layer 1: Inserting an adaptive node with a N function of normalization: We c a n s e e t h a t o u r node function, 𝑤 𝑂1,𝑖 = 𝜇𝐴𝑖 𝑥 ,for 𝑖 = 1,2, 𝑂3,𝑖 = 𝑤 +𝑤 𝑖 +𝑤 , 𝑖 = 1,2,3 1 2 3 𝑂1,𝑖 = 𝜇𝐵𝑖−2 𝑦 ,for 𝑖 = 3,4, method suppress another method regarding 𝑂1,𝑖 = 𝜇𝐶𝑖−4 𝑧 ,for 𝑖 = 5,6, When 𝜇𝐴𝑖 𝑥 ,𝜇𝐴𝑖 𝑥 and 𝜇𝐴𝑖 𝑥 are Layer 4: Includes the adaptive nodes: parameterized MFs and 𝑂1,𝑖 is the membership 𝑂4,𝑖 = 𝑤𝑖 𝑓𝑖 throughput over number of grade of a fuzzy set (𝐴1 , 𝐴2 , 𝐵1 , 𝐵2 , 𝐶1 , 𝐶2 ) and it indicates the degree in which the given input n o d e s . (𝑥, 𝑦, 𝑧) satisfy the quantifier. Layer 5: Includes a signal fixed node labeled ∑ with the function of summation Using sof t computing Layer 2: Every node in this layer is a fixed node which computes the overall output of method, the proposed algorithm can select the CANFIS network as the summation of all that its output is the product of all incoming the incoming signals. optimal path to for ward signals. Fig. 3 The flowchart of 𝑂2,𝑖 = 𝜇𝐴𝑖 𝑥 𝜇𝐵𝑖 𝑦 𝜇𝐶𝑖 𝑧 , 𝑖 = 1,2,3 𝑂5,𝑖 = 𝑤𝑖 𝑓𝑖 CANFIS-GA and designing packets to sinks. 𝑖 details