Server-PT Payr oll 172. 16. 100. 194 SF! 184 1 ServerFarm s0/0/0 OSPF Area 0 2960-2 4TT ws.w 184 1 s0/ 1/1 WestHQ s0/0/ 1 Static Route Server-PT Cisco Server 64. 100. 1. I il PC-PT EPC2
fa0/ 1 EPC3 192. 168. 1.1 2960-2 g --./' PC-PT NetAdmin s0/0/0 192. 168. 1.66 Yellow highlighted devices are accessible by dicking on them. All other devices are locked and cannot be accessed directl y. is accessed through the console connection. WestHQ is accessed through a Telnet connection. See instructions for more information. Pgina 2 de 4
ERouting OSPF PT Practice SBA A few things to keep in mind while completing thi s activi ty: 1. Do not use the browser Back button or close or reload any Exam windows during the exam. 2. Do not close Packet Tracer when you are done. It will close automatically. 3. Click the Submit Assessment button to submit your work. Introduction In thi s practice Packet Tracer Skills Exam, you will : fini sh the configurati on of a parti ally configured network establish connectivi ty to the East Region and the Internet through the use of static and dynamic routing Addressing Table Device Interface Address Subnet Mask Default Gateway S0/ 0/ 0 S0/ 0/ 1 WestHQ S0/1/0 S0/ 1/ 1 LeO Fa0/ 0 172. 16.100. 1 255.255.255.128 n/ a Fa0/ 1 W-Branch1 S0/ 0/ 0 172. 16. 100.246 255.255.255.252 n/ a LeO 10.0.0. 1 255.255.255.255 n/ a Fa0/ 0 172. 16.100. 129 255.255.255.192 n/ a Fa0/ 1 172. 16. 100.225 255.255.255.240 n/ a W-Branch2 S0/ 0/ 0 172. 16. 100.242 255.255.255.252 n/ a LeO 10.0.0.2 255.255.255.255 n/ a Fa0/ 0 172. 16.100. 193 255.255.255.224 n/ a SeiVerFarm Fa0/ 1 172. 16. 100.226 255.255.255.240 n/ a LeO 10.0.0.3 255.255.255.255 n/ a WPC1 NIC 172. 16.100. 126 255.255.255.128 172.16.100. 1 WPC2 NIC NetAdmin NIC 172. 16.100. 130 255.255.255.192 172.16.100. 129 Payroll NIC 172. 16.100. 194 255.255.255.224 172.16.100. 193 Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class. Step 1: Connect the Devices. Connect WestHQ S0/ 0/ 1 to W-Branch2 S0/ 0/ 0. WestHQ is the DCE side of the link and is setting the clock rate. Connect W-Branch2 to an available interface on WSw. Pgina 3 de 4
Step 2: Configure the Device Basics. Note: Initially, you can only access router W-Branch2 through the consJie connecti on on NetAdmin. a. Configure the following on W-Branch2: The router name is WB2. The privileged EXEC mode uses the following encrypted password: class. Enable Telnet and console line login using the following password: cisco. Configure the banner message-of-the-day as Authori zed access only! b. Configure and verify interface addressing on W-Branch2. Using the Addressing Table, configure and activate all t1e necessary interfaces on W-Branch2. Verify connectivi ty. c. Configure the correct IP addresses on WPC2 and W-Branch1. Configure WPC2 with the last IP address in the subnet. Configure the Fa0/ 1 interface on W-Branch1 with the last IP address in the subnet . d. Verify connectivi ty. Step 3: Discover the Network. Explore the network t o det ermine the IP addressing of the seri al intelfaces that WestHQ shares with W-Branch1 and W-Branch2. Remotely access WestHQ. Step 4: Configure Static and Default Routing. a. Configure connectivi ty t o the East Region. Using the next hop address 192.0.0.2, configure one summary static route on WestHQ for the entire East Region. The summary should include addresses reseiVed for future expansion. The East Region s u b n ~ t s are listed in the following t able: East Region Subnets 192.168. 1.248/ 30 192.168. 1.252/30 192.168. 1.244/ 30 192.168.0.0/ 25 192.168.0. 128/ 25 192.168. 1.0/ 26 192.168. 1.64/ 26 192.168. 1. 128/ 26 192.168. 1. 192/27 192. 168. 1.224/ 28 192.168. 1.240/ 30 Configure a default route on WestHQ t o send t o the Internet all other traffi c for destinati ons that are not found in the WestHQ routing t able. Use the outbound interface argument. b. Verify static and default routing. Pgina 4 de 4
Step 5: Configure OSPF Routing. a. Configure OSPF on WestHQ, W-Branch1, and W-Branch2. Use OSPF process ID 1 and area 0. Advertise each subnet indivi dually with its corresponding wildcard mask. On WestHQ, do not advertise the subnet to the Internet or the subnet to East Region. Disable OSPF updates out interfaces where there are no OSPF neighbors available. Configure WestHQ to send the default route to W-Branch1 and W-Branch2 in OSPF updates. b. Modify the default OSPF operation. Configure W-Branch1 to always be the DR by using a priority of 100. Configure W-Branch2 to always be the BDR by using a priority of 50. Change the hello inteiVal to 20 seconds on W-Branch1 and W-Branch2 for the LAN that these two routers share with SeiVerFarm. Verify OSPF neighbor status. c. Verify that OSPF is fully operational. Verify that the routing tables on W-Branch1, W-Branch2, and WestHQ contain all the expected routes. Step 6: Verify Full Connectivity. Although these are not scored, the following connectivi ty tests should be successful. To test the static route to East Region, successfully ping between WestHQ and EPC1. To test the OSPF neighbor establishment with SeiVerFarm, successfully ping between WPC1 and Payroll. To test end-to-end connectivi ty between the East and West Regions, successfully ping between WPC2 and EPC3. To test the default route, successfully ping the Cisco SeiVer from NetAdmin. Version 1.1 Cr8aled in Packet Tracer 5. 3. 1.0044 and Marv611.0. 1 All contents ars Co]J)'Tight@ 1992 - 2011 CiscoSystsnu, Inc. All rights r6Se:rvui. This document is Cisco Public Information.