Professional Documents
Culture Documents
S L + -
( sep -2)
p A
B
There is no resistance any where in the circuit. The switch is closed at time t =0 and the charge of the capacitor first time becomes zero at time t = t0.
In the following, column I, some statements related to the circuit are given and their responses are given in the column II . Match the items in the two columns correctly . The answer is to be given in the matrix by bubbling the matrix correctly.
Column I
(A) current in the circuit
(B) charge on the capacitor (C) magnetic energy in the circuit (D) rate of growth of the magnetic energy
Column II
(p) vary harmonically with time period 4 t0. (q) vary harmonically with time period 2t0. (r) first time becomes maximum at time t =t0 (s) would have same maximum value even if self inductance was 2 L
C D
There are two parallel and conducting long horizontal rails whose one ends are joined by a resistor of resistance R. Separation between the rails is d. A rod of mass m and resistance 2R, is of length d. The rod is placed touching the two rails. A uniform magnetic field B is applied over the entire region between the rails. The rod is projected with velocity v 0 parallel to the rails at time t =0.
2-The velocity of the rod will (a) remain constant (c) increases linearly with time (b) decreases linearly with time (d) decreases linearly with displacement
3- At certain time when induced current is i , the kinetic energy of the rod is E. Then dE/dt at the instant will be (a) zero (b) i2 3R (c) - i2 3R (d) - i2 2R
4 - By the time rod has moved by x , the charge that would have flown through the rod is
(a) B x d/ R
(b) B x d/(2m )
(c) B x d/(3R)
(d) B x d/(3mR)
5-By the time , rod stops, total heat dissipated in the rod only is equal to (a) mv02 / 3 P6- 8 : (b) mv02 / 2 (c) mv02 / 4 (d) mv02 / 6
In a region uniform magnetic field B and electric field E are applied , both in positive z- direction. A proton is projected from the origin (0,0,0) with veliocity u j at time t =0. 6- The path of the proton will be
7- The proton touches the z- axis first time after the projection , at time t =t0. Then t0 is
(a) independent of mass of the proton (b) proportional to charge of the proton (c) independent of the magnetic field (d) independent of the electric field E
8- Work done by the resulting forces on the proton, up time t is
(a) zero ( b) proportional to t & independent of B (c) proportional to t2 & independent of E (d) proportional to t2 & independent of B
P8-11 :
A uniformly dense cylinder of mass M, radius R and height H = 5R,is placed on a rough horizontal floor which have friction coeffficent 0.4 with cylider. A horizontal force P is apllied at height H above the ground level. The lne of action of the force P, intersects the axis of the cylider. H P
9 - If P = 0.25 Mg and = 0.6 , the line of action of the normal reaction of the ground passes from a point which is at distnace (a) 0.5 R from the axis of the cylinder (c) zero from the axis ( b) 0.75 R from the axis of the cylinder (d) R from the axis of the cylinder
10- If the = 0.6 and the value of P is increased , then the cylinder (a) slips before toppling (b) topples before slipping
(c) slipping and toppling begins simultaneously (d) never topples 11-If the slipping is to precede toppling, then (a) may be 0.3 (b) may be 0.7 (c) must be 0.5 (d) must be > 0.5
P12-15 :
A unifromly dense solid disc of mass M is placed on a rough horizontal floor with plane of disc vertical. A mass less point charge q is pasted to the disc at a point P which is at distance R/3 from the center . The disc is at rest and the point P is at same level as the center C of the disc. Now at time t = 0, a uniform electric field E acting downward is switch on. After that the disc started to roll without slip. Just after the time t =0, friction force on the disc towards right is f, clockwise angular acceleration of the disc is and acceleration of center of disc is ac towards right. 12- Which of the following relation is not correct? (a) f = M ac (c) qE R /3 - fR = M ac R/2 (b) qE R /3 = M R2 / 2 (d) qE R /3 = 3M R2 / 2 C
13- The acceleration of the center of disc ac just after applying the electric field is (a) 2qE/(3M) (b) qE/(3M) (c) qE/ M (d) zero
14-If qE = 2Mg , then friction coefficient between the disc and the floor is (a) lesser or equal to 1/3 (c) greater or equal to 4/9 (b) greater or equal to 1/3 (d) greater or equal to 2/9
15- If the rolling motion of the disc is continued, the displacement of the center of the disc, by the time when the point P reaches at the lowest position, will be (a) R /3 (b) R /2 (c) R /4 (d) zero
(a) 1.2
( b) zero
(c) 0.3
(d) 0.6
17- From a tower of height H, a particle is projected with velocity u towards east at time t =0. The particle hits the ground at time t =t0. Angular momentum about the towers foot situated on the ground, at any time t ( < t0 ) is L(t) . (a) L(t) has zero value just after the projection (b) L(t) remains constant (c) magnitude of L(t) increases with time t (d) magnitude of L(t) increases with time t 18- In the previous problem, L( t0 ) i.e. the angular momentum at the time when the particle is hitting the ground , is (a) independent of u (c) proportional to H2 (b) proportional to u2 (d) directed towards north
19-A square frame ABCD of side length L is made of a material of linear mass density .The frame is lying on a smooth horizontal table. A current i is flowing in the frame. The sense of current is from A to B in the side AB. Suddenly a uniform horizontal magnetic field is applied in direction edge, read following two statements: (i) tipping will be about the edge AD (ii) strength of magnetic field should be at least 2 g/ i The correct statements are (a) only(i) (b) only(ii) (c) both (i) and (ii) (d) none A D from A to B over the entire frame. If the frame is to start tipping over about one B C
20-A long straight wire carrying current in the positive x- direction, is placed on the x- axis. Let there be two small pieces A and B of the wire The two pieces A and B are of same length but very small. Let there be a point P on the y= axis as shown. A B The magnetic field at P due to the elements A and B, will be in ratio (a) 1/ PA : 1/ PB (c) 1/PA3 : 1/ PB3 (b) 1/PA 2 : 1/ PB2 (d) 1/PA : 1/ PB P
21-There is a long solenoid with 200 turns per meter. The self inductance of the solenoid is 0.8 hennery per meter of its length. A co axial ring of radius R which is much greater than the radius of the solenoid is placed around the solenoid. The mutual inductance between the solenoid and the ring is nearly (a) 0.004 hennery (b) 0.008 hennery (c) 0.04 hennery (d) zero