Professional Documents
Culture Documents
Modified : 11/13/12
2|Page
Installation:
To install LanSchool complete the following steps
1. After you logon to your computer click on the Microsoft button at the lower left hand side of your desktop. 2. In the Search Box type Software Center. 3. Select the Software Center application.
4. After the Software Center opens (this could take up to 1 min) select LanSchool. 5. Click the Install button at the lower right hand side of the screen.
Setup:
In order to use LanSchool you will need to change some settings. Follow the steps below to setup LanSchool
Modified : 11/13/12
3|Page
5. In the Preferences pane click on the Network tab if it is not already selected 6. Change the Channel Number to your copier/long distance pin. 7. Click OK
Modified : 11/13/12
4|Page
Modified : 11/13/12
5|Page
5. Select USERNAME
Modified : 11/13/12
6|Page
You will get a popup at the bottom of the screen 8. Click the small down arrow next to Save and select Save As
9. In the File Name field type in the name of the class. IE. English PD1 10. Click Save 11. Repeat Steps 3-10 for all of your classes
Modified : 11/13/12
7|Page
14. Select and delete the first line of the file. USERNAME
16. Repeat steps 12-15 for all of the files you created.
Modified : 11/13/12
8|Page
1. Open LanSchool
Modified : 11/13/12
9|Page
All of the students in your class should now be in the left hand column. 7. Click Save
8. Browse to the folder you would like to save the files to. It is recommended that you create a folder named LanSchool in your documents folder for these files. 9. Name the file. IE. English PD 1 10. Click Save
Modified : 11/13/12
10 | P a g e
Load a Class:
1. Click Class List on the toolbar 2. Click Load Class List If you have previously loaded this class it will be displayed at the bottom of this window. Simply click the class and it will load.
Modified : 11/13/12
11 | P a g e
Dismiss a Class:
Modified : 11/13/12
12 | P a g e
The Toolbar:
This is the LanSchool toolbar. Below is a brief overview of what each button does.
Shows the selected students screen on your screen and all selected student computers.
Sends a question to all selected student computers, then tallies the results.
You can use this button to create and send out tests that will display on all selected student computers. This will run a command on all selected student computers. Warning This can cause issue depending on the command sent to the computers
Modified : 11/13/12
13 | P a g e
This will close all programs on all selected student computers. Warning Using this can cause loss of student work; it will not ask to save any work.
This allows you to manage, load, and dismiss classes and class lists.
This will push files out to a specific folder on each selected student computer.
This will shutdown all selected student computers. Warning Using this can cause loss of student work; it will not ask to save any work This will open the internet on all selected student computers and browse to the same website that you are on. This will randomly choose a student computer
Modified : 11/13/12
14 | P a g e