Professional Documents
Culture Documents
Specification(s)
Should be conveniently assembled and dismantled Two carrying handles should be provided for convenient handling Left Plate Centre Plate Right Plate (Small/Large) (Small/Large) Small/Large) Height 1200 mm/1900 1200 mm/1900 1200 mm mm mm/1900 mm Width 700 mm/750 mm 700 mm/750 700 mm/750 mm mm Tolerance + 5 mm shall be acceptable in height & Width. Each plate should have one firing port window of size 175 + 5 mm x 125 + 5 mm with adequate overlapping. B.P sliding shutter from inner side. The height of the firing port shall be defined by the user. i) All fitments in the Bunker should be done in such a way that the proprieties of B.P Steel are not affected. ii) The joints shall be tested for its B.P property irrespective of the distance of such joints from the edges. iii) There should be no gap between the sheets in assembled condition of Bunker. Weight of B.P Mobile Bunker consisting all the three plates with all fitments should not be more than 152 Kgs for small Bunker and 260 Kgs for Large Bunker. Colour of the B.P Mobile Bunker should be Camouflage Pattern. Each plates of the B.P Mobile Bunker should have convenient locking arrangements for assembling and unlocking arrangements for dismantling. Each plate should provide following protection level at 90 degree angle : i) 6 Shots from SLR( 7.62 mm x 51 mm ) at a distance of 10 mtrs. ii) 6 Shots from AK-47(7.62 mm x 39) at a distance of 10 mtrs. Note: Minimum distance between shots should not be less than 20 mm. The distance of shots from the edges should not be less than 30 mm.
4.
Firing port
5.
Fitments
6. 7. 8. 9.
S/No Characteristics
10. 11. 12. Replacement Provision of Wheels Inspection of the item on supply
Specification(s)
Whenever the B.P Bunker is fired upon and the port shutter gets damaged, the replacement should be possible.
Handle
205 mm
Sliding shutters
125mm
870 mm
700mm
(LARGE SIZE)
Handle
275 mm
175 mm
1500 mm
750mm
Dimensions of all the three plates ie. Left, Centre and Right are the same