Professional Documents
Culture Documents
To monitor and control multiple network devices, you can also install our free CMS software provided within the CD manual.
To know more about our mobile phone program, EagleEyes, and where to download, please visit: http://www.eagleeyescctv.com To know more about feature applications, please visit: www.eagleeyescctv.com/video To seek for technical support, please contact: support@eagleeyescctv.com To give us your precious suggestions and comments, please contact: marketing@eagleeyescctv.com
Please read instructions thoroughly before operation and retain it for future reference.
N204_212_system_V1.0
IMPORTANT SAFEGUARD
All lead-free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and products are strictly lead-free and without the hazardous substances cited in the directive. The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol. Do not dispose of these products as unsorted municipal waste. Contact your local dealer for procedures for recycling this equipment.
Trademark Acknowledgements
iPhone is the registered trademark of Apple Inc. BlackBerry and related trademarks, names and logos are the property of Research In Motion Limited and are registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited. Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions. Microsoft, Windows, Internet Explorer, Mozilla FireFox, Google Chrome, QuickTime, Windows Mobile & Symbian mentioned in this document are the registered trademarks of their respective holders.
Disclaimer
We reserve the right to revise or remove any content in this manual at any time. We do not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The content of this manual is subject to change without notice.
Trademark Acknowledgements
Internet Explorer, Microsoft, Windows, Mozilla & QuickTime are registered trademarks of the respective holders.
MPEG4 Licensing
THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG4 VISUAL STANDARD (MPEG-4 VIDEO) AND/OR (ii) DECODING MPEG4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
GPL Licensing
This product contains codes which are developed by Third-Party-Companies and which are subject to the GNU General Public License (GPL) or the GNU Lesser Public License (LGPL). The GPL Code used in this product is released without warranty and is subject to the copyright of the corresponding author. Further source codes which are subject to the GPL-licenses are available upon request. We are pleased to provide our modifications to the Linux Kernel, as well as a few new commands, and some tools to get you into the code. The codes are provided on the FTP site, and please download them from the following site or you can refer to your distributor:
http://download.dvrtw.com.tw/GPL/076D_Series/arm-linux-2.6.tar.gz
TABLE OF CONTENTS
1. OVERVIEW......................................................................................................................................... 1
1.1 Product Features....................................................................................................................................... 1 1.2 Package Content....................................................................................................................................... 1 1.3 Hardware Overview................................................................................................................................... 1 1.4 Rear Panel ................................................................................................................................................ 2
2. BEFORE USING THE NETWORK CAMERA ..................................................................................... 3 3. ACCESSING THE CAMERA VIA VIDEO VIEWER ............................................................................. 4
3.1 Install the software .................................................................................................................................... 4 3.2 Accessing the camera ............................................................................................................................... 4 3.3 Control panel overview.............................................................................................................................. 5
3.3.1 Simplified Version (Default)..............................................................................................................................5 3.3.2 Full Function Version........................................................................................................................................6 3.3.3 Main Button Overview ......................................................................................................................................6
APPENDIX 1 SPECIFICATIONS .......................................................................................................... 28 APPENDIX 2 COMPATIBLE USB FLASH DRIVE LIST ........................................................................ 29
CONNECTOR / BUTTON
Reset Default
DESCRIPTION
This button is hidden in the pinhole. Press and hold the reset button until the network camera rebooted. This will reset all parameters, including the IP address to factory default settings. When the camera is power-supplied, this indicator will be on as red. Support the connection to an audio device, such as a speaker, for voice transmission of the remote side. Support the connection to an audio device, such as a microphone, for voice transmission of the local side. Connect to the video input connector of your monitor with a video cable (i.e. a RCA cable with the BNC connector, or a coaxial cable for video output. * The video cable is optional. Connect the camera to the network with the supplied RJ45 cable. Connect the DC 12V adapter for power supply. Support the connection to an alarm device with the supplied alarm cable for function scalability.
USB Port
Connect to the optional wireless dongle to have the wireless function, or USB flash drive for video recording.
To check or configure this network camera only, its recommended to use the web browser Microsoft Internet Explorer or Mozilla Firefox. For details about using the web browser, please refer to 5. ACCESSING THE CAMERA VIA WEB
3. ACCESSING THE CAMERA VIA VIDEO VIEWER 3.1 Install the software
Step1: Place the supplied CD into your CD-ROM or DVD-ROM drive. The program will be automatically run.
Step2: Click Licensed Software AP to install Video Viewer, or click Download The Latest Version under Licensed Software AP to download the latest version of Video Viewer from the Internet (if your PC is connected to Internet). Step3: Follow the on-screen instructions to finish the installation. When the installation is completed, a shortcut icon will be placed on your PC desktop.
Description
Click to show the predefined IP address(es). You can add, remove or search the IP address to log in the DVR remotely. Remote Config Click to go to the detailed system configuration. For details, please refer to 4. SYSTEM CONFIGURATION at page 13. Click to go to the detailed record setting. For details, please refer to 3.4.1 Record at page 7. Click to choose the language of this program. The language change will take effect when this program is closed and executed again.
Miscellaneous Control
Log
Click to view all event and recording logs, search the desired log(s) by date, or playback the recording of the selected log. Click to start / stop the manual recording.
The record button will be disabled when the reserved disk capacity set in Record Setting is larger than the current disk capacity. For details, please refer to 3.4.1 Record at page 7. Click to take a snapshot of the current view. The snapshot will be saved in the path you specified in Record Setting. Click to show the current network connection details.
Snapshot Information
In the Record Setting page, you can set the following items: Record type Pre- / post-event record time (0~10 seconds) Record time setting Record path Note: The record function will be disabled when the reserved disk capacity in Reserved(MB) is larger than the current disk capacity in Free(MB). When Manual is checked, click or on the main control panel to start the manual recording
immediately, and the recordings will be saved in the location specified in Record Path. When Motion and / or Alarm are checked, the recording function will be enabled for any motion or alarm event, and the recordings will be saved in the location specified in Record Path.
3.4.2 Playback
To play a recording, click or , and select the Record tab. A list of all the recordings will be shown by
defaults, and you can also sort out the logs you want to speed up the search time.
Step4: Click Upgrade Firmware to start firmware upgrade. Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during firmware upgrade, or the upgrade may be failed. The camera will reboot after the upgrade. Step5: Select the IP address of the camera and click again to check if the firmware is upgraded.
3.4.4 E-Map
Video Viewer is also a Central Management System (CMS) software, which allows network device control & management for up to 16 devices simultaneously. Note: Before using this function, make sure Video Viewer is connected to all the devices (up to 16) you want to monitor. E-Map is ONLY available when the control panel is switch to the full function version.
to enter the E-Map page as follows. Note: To know where the buttons are, please refer to 3.3.1 Simplified Version (Default) at page 5, and 3.3.2 Full Function Version at page 6.
STEP2: Right-click to show the shortcut menu on the top-left panel, and select the E-Map group you want to add. There are three E-Map groups you can add: Google E-MAP, Single E-MAP, and Building E-MAP.
STEP3: When the E-Map group is created, you will see the tree on the top-left panel, showing all the devices youve added to this group.
Icon
Description
The connected device is camera. When its selected, it will become red.
The connected device is DVR. When its selected, it will become red. For any motion or alarm event, it will appear on the screen to catch your attention. To know whats happening quickly, double-click the device icon on the E-Map to show the live view.
10
11
12
4. SYSTEM CONFIGURATION
Before using the network camera, make sure you have installed the supplied software, Video Viewer, and configure network settings. If not, please refer to 3.1 Install the software at page 4 or your installer. Note: Its recommended to consult with your installer before changing system configurations. Note: You need to be the supervisor to enter the system configuration page. If not, please re-log into the camera with the supervisor user level. Click and select to enter the system configuration page. All the system configurations
Sub-menu
Network QoS DDNS SNTP FTP MAIL Filter UPnP Video Color Time
Limit the data flow for live streaming. Enter DDNS information when the network type is PPPOE or DHCP. Synchronize your camera time with the networked computer systems. Enter the FTP information for event notifications when FTP is chosen in General Trigger. Enter Email information for event notifications when Email is chosen in General Trigger. Choose to permit or block the IP address(es) which can access this camera. Allow this camera to be detected among devices within the same network area for easy and quick usage. Set the image resolution, quality and frame rate. Adjust the color performance. Set daylight saving time and the current time.
13
4.1 General
In General, you can check the general information for your network camera, such as the firmware version and MAC address, and also modify the identification name of your camera (up to 15 alphanumeric characters).
4.1.1 Log
To quickly search the system log you want by event type, click the drop-down list to select the system log type you want to check, and click Reload to refresh the list. To clear all system event logs, click Clear.
4.1.2 Account
You can create a new account with different user access privilege, or delete or modify an existing account setting.
14
Column
User Name Password User Level Life Time
Description
Set a user name that will be used for camera access. The user name allows up to 16 alphanumeric characters. Set the password that will be used for remote login. The password allows up to 16 alphanumeric characters. Set the security level of an account to give the permission to control different functions. There are four user levels: Supervisor, Power User, Normal User and Guest. Select how long this account is allowed to stay online (1 MIN / 5 MIN / 10 MIN / 1 HOUR / 1 DAY / INFINITE)
Step2: Then, click Apply to save your setting and create a new account.
15
4.1.3 OnLineUser
You can check the current online user(s) with respective online information. To refresh the list, click Refresh.
4.1.4 Trigger
You can set the motion or alarm detection and select the notification function.
Trigger Setting In this section, you can select to enable or disable the alarm or motion detection.
Item
Alarm Motion
Description
Select to enable or disable the alarm function. Select to enable or disable the motion detection function. Motion Detection Area Setting When Enable is selected, click Setting to enter the motion detection area setting page as follows:
Sensitivity: Set the detection sensitivity (High / Normal / Low). Area Setting: Set the motion detection area by selecting the area grids with your mouse. Pink grids represent the area that is not being detected while the transparent grids are the area under detection. You can set multiple areas under detection. Click (Clear All) to set the whole area undetected. Click (Select All) to set the whole area under detection.
Duration
16
Notification Setting In this section, you can select to enable E-mail and/or FTP notification when an alarm or a motion happened.
Item
Method
Description
Email When this option is checked, the network camera will send the captured video clip or image to the assigned E-mail address(s) once motion or alarm recording happened. FTP When this option is checked, the network camera will upload the captured video clip or image to the specified FTP site once motion or alarm recording happened.
Select the file type of the notification files: H264 (video) / MPEG4 (video) / JPEG (image). Set the record time of the notification video clip (1 ~ 5 seconds).
4.2 Network
Select Network to make network settings based on your network environment. There are three network connection types: Static IP, PPPOE, and DHCP.
Note: This camera doesnt support POE router or hub. For Static IP:
a) Enter the information of Server IP, Gateway and NetMask obtained from your ISP (Internet Service Provider). b) Enter the port number. The valid number ranges from 1 to 9999. The default value is 80. Typically, the TCP port used by HTTP is 80. However in some cases, it is better to change this port number for added flexibility or security. c) Click Apply, and click OK to exit the setting page.
For PPPOE:
a) Go to Network DDNS, and select default in the System Name drop-down list. b) In Hostname, keep the default value, i.e. the MAC address of this camera, or change the name to a meaningful one. Its easier to memorize. c) Note down the whole address of the camera, for example, MAC000E53114389.ddns.dvrtw.com.tw.
Note: You can also create a DDNS account from a website which provides free DDNS service. For details, please refer to APPENDIX 1 in the installation guide.
d) Go to Network and select PPPOE. Then, enter the user name and password obtained from your ISP. 17
For DHCP:
a) Finish the DHCP router setting. Get a router and connect it to the Internet via your PC (with Static IP or PPPoE setting). There are different setting methods for different routers. Please refer to their respective user manuals. b) Go to Network DDNS, and select default in the System Name drop-down list. c) In Hostname, keep the default value, i.e. the MAC address of this camera, or change the name to a meaningful one. Its easier to memorize. d) Note down the whole address of the camera, for example, MAC000E53114389.ddns.dvrtw.com.tw.
Note: You can also create a DDNS account from a website which provides free DDNS service. For details, please refer to APPENDIX 1 in the installation guide.
f)
Step3: Disconnect your camera and your PC, and connect them to Internet separately. Step4: Add the IP address or host name of your camera in of Video Viewer with correct user name and password, and click it twice to see if you can access to your camera.
4.2.1 QoS
QoS, Quality of Service, is the ability to control the data flow for real-time streaming. This function is important if your network bandwidth is insufficient and you have other devices to share the network bandwidth.
18
Check QoS Enable, and set the max. upload rate from 256 to 10240 kbps.
4.2.2 SNTP
SNTP (Simple Network Time Protocol) is used to synchronize your camera time with the networked computer systems.
Function
GMT (Greenwich Mean Time) Server Name Sync. Period Sync Server Time
Description
Once users choose the time zone, the network camera will adjust the local area time of the system automatically. Simply use the default SNTP server (For example, tock.stdtime.gov.tw) or change to another server with which users are familiar. Select Daily to synchronize the camera time with the network time every day or None to turn off this function. Click and the network camera will synchronize the time with the network time.
4.2.3 FTP
Enter the detailed FTP information and click Apply to confirm. The information you set here will be applied when FTP is selected in General "Trigger".
4.2.4 MAIL
Enter the detailed E-mail information and click Apply to confirm. The information you set here will be applied when Email is selected in General "Trigger".
19
Function
Server Mail From Verify Password Email Address
Description
Enter the SMTP server address provided from your e-mail system supplier. Enter the entire mail address to ensure E-mails will not be blocked by SMTP. Some mail servers are required to verify the password. Please enter the user name and password. Add the E-mail address(s) of the assigned recipient(s).
4.2.5 Filter
Choose to permit or block the IP address(es) which can access this camera.
Function
Error Login Count Error Lock Time Echo Request Filter
Description
Set the maximum count for login failure. When the maximum count is reached, the IP address trying to access the network camera will be locked. Set the lock time in minutes when the maximum count of error login for an IP address is reached. Select Non-Block to allow other users to use the ping command to detect the IP address of your network camera, or Block to deny the ping command request. Choose to enable (YES) or disable (NO) the filter function. If YES is selected, choose whether you want to permit (Allow) or block (Deny) the IP address list below. To add an item to the IP address list, key in the IP address in IP Address, and click Add. To remove an existing item in the IP address list, click the item you want to remove, and click Delete.
Apply
Click Apply on the bottom right corner when any change is made in this menu, or the change will not be recorded in the system.
4.2.6 UPnP
UPnP stands for Universal Plug and Play, which allows devices to connect seamlessly in the home and corporate environments and simplify installation of computer components. Check Enable UPnP to allow the network camera to be detected among devices within the same network area, and set the identification name of the camera in Friendly name.
20
When this function is activated, the other PC within the same domain as this camera will be able to search this camera in Network Neighbor with the identification name set in Friendly name. Double-click it to quickly open the web browser for camera access. For details about camera access via the web browser, please refer to 5. ACCESSING THE CAMERA VIA WEB BROWSER at page 23.
4.3 Video
Set the image resolution, quality and frame rate.
Item
JPEG / MPEG / H264
Description
Select the image resolution and quality. Image Resolution: CIF / 4CIF Image Quality: BEST / HIGH / NORMAL / LOW
Frame Rate
The frame rate allowed to each viewer can be adjusted to adapt to the bandwidth on the network. Set the desired image frequency to the maximum (FULL) or to a specified frame rate (1/2; 1/3; 1/4; 1/5; 1/10; 1/15; 1/20; 1/25; 1/30). The actual frame rate depends on the actual network connection, and may be lower than the specified one.
4.4 Color
Adjust the color performance from Brightness, Contract, Hue and Saturation. Click and drag the slider to preview the color change on the live view panel and adjust the image color. Then, click Apply to confirm the change. To restore the default values, click Default, and click Apply to confirm the change.
21
4.5 Time
Set daylight saving time and the current time.
Function
Daylight Saving
Description
Specify whether to use daylight saving time (ON / OFF). If this function is enabled, set the time period (START / END), and adjust the daylight saving time in hours (ADJUST).
Time
22
Step3: When the login is successful, the live view is shown similar as follows.
23
Function
Media Type
Icon
--
User Level
Supervisor / Power User / Normal User / Guest
Description
Select the web transmission format from the drop-down list: H.264 / MPEG-4 / Motion JPEG / QuickTime For users using Mozilla Firefox, only QuickTime is selectable. QuickTime is Apple Inc.s multimedia software. You need to have QuickTime installed in you operating system before selecting QuickTime. When it is selected, you will be promoted to enter the user name and password to access the camera.
--
Supervisor / Power User / Normal User Supervisor / Power User / Normal User Supervisor / Power User / Normal User Supervisor / Power User / Normal User Supervisor / Power User / Normal User Supervisor / Power User / Normal User
Click & drag the slider to select the video quality: Basic / Normal / High / Best. Select the video resolution from the drop list: 4CIF / CIF. Click to switch the audio function on / off. Click to take a snapshot for the current view, and a new browser window will be opened to display the captured image.
0 Click to rotate the image 180 counterclockwise when necessary.
Audio Switch
Snapshot
Main Menu
Network
Sub-menu
Network QoS Wireless DDNS SNTP FTP Mail Filter UPnP
Reference
Remote Config Remote Config Network Network QoS
For details, please refer to APPENDIX 2 in the installation guide. Remote Config Remote Config Remote Config Remote Config Remote Config Remote Config Remote Config Remote Config Custom Setting Remote Config Remote Config Remote Config Remote Config Remote Config General General General General Video Log Account Account Trigger Network Network Network Network Network Network Color Time DDNS SNTP FTP MAIL Filter UPnP
Camera
Color Time
General
Allows you to know where the network camera is. The system will prompt you to apply a Goole Maps Key if your access is denied. Please follow the instructions below when youre denied: Google Maps 1. 2. 3. Click Sign up for a Google Maps key to enter the application page. Check the terms and conditions, and enter the IP address of the network camera. Then, click Generate API Key. Copy the generated API key, and click Update Google Maps Key on the web browser to paste it. . For details, please refer to 3.4.3 Firmware Upgrade at page 8.
Upgrade
25
26
27
APPENDIX 1 SPECIFICATIONS
Standard Res. Model Network LAN Port LAN Speed Supported Protocols USB Port Wireless Features (optional) YES 10/100 Based-T Ethernet DDNS, DNS , PPPoE, DHCP, NTP, SNTP, TCP/IP,UDP ICMP, SMTP, FTP, HTTP, RTP, RTSP For optional wireless dongle & USB flash drive (1) Supports 802.11 n/b/g wireless dongle (WU5214) (2) Ad-Hoc and infrastructure mode (3) WPS function with Push Button Config NTSC: 30, PAL: 25 10 Multiple user access levels with password protection, WEP 64/128 bit, WPA-PSK, WPA2-PSK (1) The licensed software Video Viewer for up to 16 network cameras control simultaneously (2) AJAX management user interface for web browser Video / Audio Video Compression Video Remote Control Video Adjustment Mobile Audio Compression Audio Input Audio Output Camera Image Sensor Pixels Lens F-number Viewing Angle Shutter Speed IR LED Min Illumination Video Output BLC White Balance Others Remote Control Motion Detection Alarm and event Notification General I/O Power Operating Temperature Humidity YES YES Image upload over FTP and Email Alarm in x1 DC 12V, 1A 0~40 85% Pentium 4 CPU 1.3 GHz or higher, or equivalent AMD 256 MB RAM AGP graphics card, Direct Draw, 32MB RAM Windows Vista, XP, Windows 2000 Server, ME, 98, DirectX 9.0 or later Internet Explorer 6.x or later 152.5(L) x 115.2(W) x 40.2(H) (6.00 x 4.54 x 1.58) 812g (1.79 lbs) including mounting bracket and power supply Indoor 1/3 CCD image sensor NTSC: 512(H) x 492(V) / PAL: 512(H) x 582(V) F1.9 60 1 / 60 (1/50) to 1 / 100,000 sec. YES 0 Lux (10m IR ON) 1.0 Vp-p. 75 AUTO ATW 1/3 High Resolution CCD image sensor NTSC: 768(H) x 494(V) / PAL: 752(H) x 582(V) H.264 / MPEG4 / MJPEG YES Brightness, Contrast, Saturation and Hue Support 3GPP mobile surveillance ULaw, 128kbps Built-in Microphone, External Microphone Input YES High Res. Model
f4.6mm
28
MANUFACTURER Transcend
A-data Sandisk
U208 F200 Micro Vault Tiny 2G Micro Vault Tiny 4G Micro Vault Tiny
29
H.264
Chinese_N204_212_system_V1.0
(Restriction of Hazardous Substances, (RoHS))
MPEG-4
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (MPEG-4 VIDEO) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
GPL
This product contains codes which are developed by Third-Party-Companies and which are subject to the GNU General Public License (GPL) or the GNU Lesser Public License (LGPL). The GPL Code used in this product is released without warranty and is subject to the copyright of the corresponding author. Further source codes which are subject to the GPL-licenses are available upon request. We are pleased to provide our modifications to the Linux Kernel, as well as a few new commands, and some tools to get you into the code.The codes are provided on the FTP site, and please download them from the following site or you can refer to your distributor:
ftp://ftp.dvrtw.com.tw/GPL/AV074/
1. ............................................................................................................................................. 1
1.1 ................................................................................................................................................... 1 1.2 ................................................................................................................................................... 1 1.3 ................................................................................................................................................... 1 1.4 .......................................................................................................................................................... 2
3.4 .................................................................................................................................................... 7
3.4.1 ...........................................................................................................................................................7 3.4.2 ...........................................................................................................................................................7 3.4.3 ...........................................................................................................................................................8 3.4.4 E-Map...............................................................................................................................................................8
4. ........................................................................................................................................... 13
4.1 General () ......................................................................................................................................... 14
4.1.1 Log ().......................................................................................................................................................14 4.1.2 Account ()................................................................................................................................................14 4.1.3 OnLineUser ()...............................................................................................................................16 4.1.4 Trigger ()..................................................................................................................................................16
5. ........................................................................................................... 23
5.1 ............................................................................................................................................. 23 5.2 .......................................................................................................................................... 24
5.2.1 ........................................................................................................................................................24 5.2.2 .................................................................................................................................................24
1. 1.1
H.264 / /
1.2
RJ45 ( Video Viewer )
1.3
1.4
LAN
USB
USB
2.
1) Video Viewer CMS 2) Video Viewer CMS
16 Video Viewer Video Viewer 4 3. VIDEO VIEWER 13 4.
23 5.
2 [Licensed Software AP] Video Viewer [Licensed Software AP] [Download The Latest Version] Video Viewer ( ) 3
3.2
1 Video Viewer
[Address Book] 2 IP
IP
3 IP Video Viewer
3.3
3.3.1 ()
3.3.2
3.3.3
IP DVR IP 13 4. 7 3.4.1
3.4
3.4.1
3.4.2
3.4.3
1 IP
4 5 IP
3.4.4 E-Map
Video Viewer (CMS) 16 Video Viewer ( 16 ) E-MAP
E-MAP
1 E-MAP
5 3.3.1 () 6 3.3.2
3 E-MAP
DVR E-MAP
10
/ E-MAP
Google E-MAP
E-MAP E-MAP E-MAP ( [ E-MAP]) E-MAP ( [ E-MAP]) Google E-MAP
E-MAP
E-MAP E-MAP
11
E-MAP
[ E-MAP] E-MAP
12
4.
Video Viewer 4 3.1
1. MAC 2. 1. 2. 1. / 2. 3.
Network () QoS DDNS SNTP FTP Email Filter UPnP Video () Color () Time ()
PPPOE DHCP DDNS [General] [Trigger] [FTP] FTP [General] [Trigger] [Email] Email IP
13
4.1 General ()
[General] MAC ( 15 )
4.1.1 Log ()
[Reload] () [Clear] ()
4.1.2 Account ()
1 [New] ()
14
User Name () Password () User Level ()
16 16 Supervisor ()Power User ()Normal User () Guest () 1 MIN (1 ) / 5 MIN () / 10 MIN (10 ) / 1 HOUR (1 ) / 1 DAY (1 ) / INFINITE ()
Life Time ()
2 [Apply] ()
1 2 [Apply] () [Delete] ()
15
4.1.3 OnLineUser ()
[Refresh] ()
4.1.4 Trigger ()
Alarm () Motion ()
[Enable] () [Setting] ()
Sensitivity () High () / Normal () / Low () () ()
Duration ()
(5 / 10 / 20 / 40 )
16
E-mail / FTP
Method ()
4.2 Network ()
[Network] () 3 Static IP ( IP)PPPOE DHCP
PPPOE
a) [Network] [DDNS] [System Name] () [default] b) [Hostname] ( MAC ) c) MAC000E530D93E3.ddns.dvrtw.com.tw
DDNS DDNS
d) [Network] [PPPOE]
17
e) [Apply] () [OK] ()
DHCP
a) DHCP ( IP PPPoE ) b) [Network] [DDNS] [System Name] () [default] c) [Hostname] ( MAC ) d) MAC000E530D93E3.ddns.dvrtw.com.tw
DDNS DDNS
e) [Network] [DHCP]
f)
[Apply] () [OK] ()
3 4 Video Viewer IP
18
4.2.1 QoS
QoS (Quality of Service) [QoS Enable] () ( 256 10240 kbps )
4.2.2 SNTP
SNTP ()
4.2.3 FTP
FTP [Apply] () [General] [Trigger] [FTP]
19
4.2.4 Email
[Apply] () [General] [Trigger] [Email]
SMTP SMTP
4.2.5 Filter
IP
IP IP [Non-Block] ping IP [Block] ping (YES) (NO) IP [YES] () IP IP [IP Address] (IP ) IP [Add] () IP [Delete] ()
Apply ()
[Apply] ()
20
4.2.6 UPnP
UPnP Universal Plug and Play () [Enable UPnP] ( UPnP) [Friendly name] ()
4.3 Video ()
21
4.4 Color ()
Brightness ()Contract ()Hue () Saturation () [Apply] () [Default] () [Apply] ()
4.5 Time ()
ON () / OFF ()
22
5.
Video Viewer CMS 4 3. VIDEO VIEWER
23 5.1 24 5.2.1 24 5.2.2 USB 26 5.3 USB
5.1
1 http://IP : IP 60.121.46.236 888 URL http://60.121.46.236:888 Enter 2 [LOGIN]
23
5.2
5.2.1
Media Type ()
--
H.264 / MPEG-4 / Motion JPEG / QuickTime Mozilla Firefox QuickTime QuickTime Apple QuickTime QuickTime QuickTime
--
Supervisor ()Power User ( ) Normal User () Supervisor ()Power User ( ) Normal User () Supervisor ()Power User ( ) Normal User () Supervisor ()Power User ( ) Normal User () Supervisor ()Power User ( ) Normal User () Supervisor ()Power User ( ) Normal User ()
1800
5.2.2
[Configuration] () Network ()Camera () General ()
Network () 17 4.2 Network ()
24
Camera () 22 4.4 Color () 22 4.5 Time () General () 14 4.1 General () 21 4.3 Video ()
25
Network ()
Remote Config () Remote Config () 2 Remote Config () Remote Config () Remote Config () Remote Config () Remote Config () Remote Config () Remote Config () Remote Config () Custom Setting () Remote Config () General () Log () Network () Network () Network () Network () Network () Network () Color () Time () DDNS SNTP FTP Email Filter UPnP Network () Network () QoS
Camera ()
Color () Time ()
General ()
Google () Google Maps (Google ) 1. 2. 3. [Sign up for a Google Maps key] IP [Generate API Key] API [Update Google Maps Key]
Upgrade ()
8 3.4.3
5.3 USB
USB
5.3.1
USB USB USB USB 30 2 USB ( / / / ) EXT3
26
5.3.2
USB
5.3.3 USB
[Configuration] () [USB] USB USB
27
5.3.4
[Playback] ()
28
1
LAN LAN USB () 10/100 Based-T Ethernet DDNSDNSPPPoEDHCPNTPSNTPTCP/IPUDP ICMPSMTPFTPHTTPRTPRTSP USB (1) 802.11 n/b/g (WU5214) (2) Ad-Hoc infrastructure (3) WPS Push Button Config NTSC:30 / PAL: 25 10 WEP 64/128 bitWPA-PSKWPA2-PSK (1) Video Viewer 16 (2) AJAX F IR LED (BLC) Others / FTP / x1 DC 12V / 1A 0~40 85% Pentium 4 CPU 1.3 GHz AMD 256 MB RAM AGP Direct Draw32MB RAM Windows VistaXPWindows 2000 ServerME98DirectX 9.0 Internet Explorer 6.x 152.5(L) x 115.2(W) x 40.2(H) (6.00 x 4.54 x 1.58) 812g (1.79 lbs) 1/3 CCD NTSC:512(H) x 492(V) / PAL: 512(H) x 582(V) f4.6mm F1.9 60 1 / 60 (1/50) to 1 / 100,000 sec 0 Lux (10m IR ON) 1.0 Vp-p. 75 AUTO ATW 1/3 CCD NTSC:768(H) x 494(V) / PAL: 752(H) x 582(V) H.264 / MPEG4 / MJPEG BrightnessContrastSaturation Hue 3GPP ULaw, 128kbps
(mm)** /
* ** ( 5mm)
29
2 USB
Transcend
JFV35 JFV30
A-data Sandisk
U208 F200 Micro Vault Tiny 2G Micro Vault Tiny 4G Micro Vault Tiny
30
Italian_N204_212_system_V1.0
Messa a terra
Questo un prodotto di sicurezza di Classe 1 (dotato di messa a terra protettiva incorporata nel cavo dalimentazione). La spina elettrica deve essere inserita esclusivamente in una presa di corrente dotata di contatto di messa a terra. Qualsiasi interruzione del conduttore protettivo, allinterno o allesterno dello strumento, lo render pericoloso. Linterruzione intenzionale proibita.
Acqua e Umidit
Non esporre questo prodotto a gocciolamenti o spruzzi; inoltre, sul prodotto non devono essere collocati oggetti riempiti con liquidi, come vasi.
Licenza MPEG4
QUESTO PRODOTTO SOTTO LA LICENZA DEL PORTAFOGLIO LICENZE DI BREVETTI MPEG-4 VISUAL PER USO PERSONALE NON COMMERCIALE DEGLI UTENTI PER LA (i) CODIFICA VIDEO IN CONFORMIT ALLO STANDARD MPEG-4 VISUAL (VIDEO MPEG-4) E/O (ii) LA DECODIFICA VIDEO MPEG-4 CHE STATO CODIFICATO DA UN UTENTE IMPEGNATO IN UNA ATTIVIT PERSONALE E NON COMMERCIALE E/O CHE STATO OTTENUTO DA UN FORNITORE VIDEO AUTORIZZATO DA MPEG LA A FORNIRE VIDEO MPEG-4. NESSUNA ALTRA LICENZA E GARANTITA, NE DEVE CONSIDERASI IMPLICITA, PER QUALSIASI ALTRO USO. ALTRE INFORMAZIONI, INCLUDENDO QUELLE RELATIVE AD USI PROMOZIONALI INTERNI E COMMERCIALI ED ALLE CONCESSIONI DI LICENZA, POSSONO ESSERE OTTENUTE DALLA MPEG LA, LLC. VISITARE IL SITO HTTP://WWW.MPEGLA.COM.
Licenza GPL
Questo prodotto contiene codici che sono sviluppati da Terze Parti e che sono soggette a GNU General Public License (GPL) o a GNU Lesser Public Licence (LGPL). Il codice GPL utilizzato in questo prodotto viene rilasciato senza alcuna garanzia ed soggetto al copyright dellautore. Ulteriori codici sorgente soggetti a licenze GPL, sono disponibili su richiesta. Siamo lieti di fornire le nostre modifiche al Linux Kernel, oltre ad alcuni comandi nuovi, ed alcuni strumenti per accedere al codice. I codici sono disponibili sul sito FTP, si raccomanda di scaricarli dal seguente sito oppure consultare il proprio distributore:
ftp://ftp.dvrtw.com.tw/GPL/AV074/
Versione
Firmware: 1W35-1W14-1W13-1W04-A2 Software Video Viewer AP: 0130
CONTENUTI
1. PANORAMICA .................................................................................................................................... 1
1.1 Caratteristiche del Prodotto....................................................................................................................... 1 1.2 Contenuto della confezione....................................................................................................................... 1 1.3 Panoramica dellHardware ........................................................................................................................ 1 1.4 Pannello posteriore ................................................................................................................................... 2
2. PRIMA DI USARE LA VIDEOCAMERA IN RETE ............................................................................... 3 3. ACCEDERE ALLA VIDEOCAMERA ATTRAVERSO VIDEO VIEWER........................................................... 4
3.1 Installazione del software .......................................................................................................................... 4 3.2 Accedere alla videocamera ....................................................................................................................... 4 3.3 Descrizione del pannello di controllo......................................................................................................... 5
3.3.1 Versione semplificata (impostazione predefinita).............................................................................................5 3.3.2 Versione completa di tutte le funzioni ..............................................................................................................6 3.3.3 Descrizione dei tasti principali..........................................................................................................................6
4.2 Rete......................................................................................................................................................... 17
4.2.1 QoS ................................................................................................................................................................19 4.2.2 SNTP..............................................................................................................................................................19 4.2.3 FTP.................................................................................................................................................................19 4.2.4 MAIL ...............................................................................................................................................................20 4.2.5 Filtro ...............................................................................................................................................................20 4.2.6 UPnP ..............................................................................................................................................................21
Microfono
Indicatore di Alimentazione
CONNETTORE/PULSANTE
Reset Default
DESCRIZIONE
Questo pulsante nascosto nella spina. Premere e mantenere premuto il pulsante di reset fino a quando la videocamera in rete non si sar riavviata. Questo resetter tutti i paramentri, incluso lindirizzo IP e li riporter alle impostazioni di default di fabbrica. Quando la videocamera alimentata ad elettricit, questo indicatore sar acceso e di colore rosso. Supporta la connessione ad un dispositivo audio, come ad esempio uno speaker, per la trasmissione remota della voce. Supporta la connessione ad un dispositivo audio, come ad esempio un microfono, per la trasmissione locale della voce. Collegare i connettori di entrata video del vostro monitor con un cavo video (cio un cavo RCA con connettore BNC, o un cavo coassiale per luscita video.) * Il cavo video un optional. Collegare la videocamera alla rete con il cavo RJ45 in dotazione. Collegare ladattatore da 12V DC per lalimentazione elettrica. Supporta la connessione ad un dispositivo dallarme con il cavo dallarme per la scalabilit della funzione.
Cavo di Allarme Filo rosso: Segnale dallarme + Black wire: Segnale dallarme - (Terra)
Porta USB
Collegare il dongle wireless opzionale per la funzione wireless o il flash drive USB per la registrazione dei video.
Per controllare o configurare solo questa videocamera, si consiglia di usare il browser. "Microsoft Internet Explorer" o "Mozilla Firefox". Per i dettagli sullutilizzo del browser, fare riferimento alla sezione "5. ACCEDERE ALLA VIDEOCAMERA VIA BROWSER" a pagina 23.
3. ACCEDERE ALLA VIDEOCAMERA ATTRAVERSO VIDEO VIEWER 3.1 Installazione del software
Fase 1: Porre il CD in dotazione nellunit CD-ROM o DVD-ROM. Il programma viene eseguito automaticamente. Fase 2: Cliccare su "Licensed Software AP" (Licenza dUso per il Software Access Point) per installare Video Viewer, o cliccare su "Download The Latest Version" (Scarica lUltima Versione) sotto "Licensed Software AP" (Licenza dUso per il Software Access Point) per scaricare lultima versione di Video Viewer da Internet (se il vostro PC connesso ad Internet). Fase 3: Seguire le istruzioni su schermo per terminare linstallazione. Completata linstallazione, sul desktop del PC viene visualizzata licona di collegamento rapido .
Chiudere tutte le visualizzazioni presentate Chiudere visualizzazione corrente Dimensioni originali Schermo pieno Cambia modalit di visualizzazione Volume audio
Mostra visualizzazione: 1-Taglia Mostra visualizzazione: 4-Taglia Mostra visualizzazione: 6-Taglia Volume audio Mostra visualizzazione: 9-Taglia Mostra visualizzazione: 13-Taglia Mostra visualizzazione: 16-Taglia
Rubrica
Controlli vari
Registro
Fare clic per visualizzare i registri di tutti gli eventi e le registrazioni, ricercare i registri desiderati per data, o riprodurre le registrazioni dei registri selezionati. Il pulsante di registrazione sar disabilitato quando la capacit del disco riservata impostata in Impostazione di Registrazione maggiore della capacit attuale del disco. Fare riferimento alla sezione 3.4.1 Remoto, a pagina 7, per i dettagli. Fare clic per scattare una foto della visualizzazione corrente. Questa foto verr salvata nel percorso specificato in Record Setting (Impostazioni registrazione). Fare clic per mostrare i dettagli della connessione di rete corrente.
Registra/Arresta registrazione
Istantanea
Informazioni
Nella pagina Record Setting (Impostazioni Registrazione), possibile impostare i seguenti elementi: Tipo registrazione Tempo di registrazione pre/post evento (0 ~ 10 secondi) Impostazione orario di registrazione Percorso di registrazione Nota: La funzione di registrazione verr disabilitata quando la capacit del disco riservata in MB Riservati maggiore rispetto alla capacit attuale in MB Liberi. Se la voce Manual (Manuale) selezionata, cliccare su o nel pannello di controllo principale per
avviare immediatamente la registrazione manuale; la registrazione sar salvata nel posto specificato in Percorso Registrazione. Quando "Motion" (Movimento) e/o Alarm (Allarme) sono controllati, la funzione di registrazione sar attivata da qualunque evento di movimento o di allarme e la registrazione sar salvata nel posto specificato in "Record Path" (Percorso Registrazione).
3.4.2 Riproduzione
Per riprodurre una registrazione, fare clic su o e selezionare la scheda Record (Registrazione).
Come impostazione predefinita, verr visualizzato un elenco con tutte le registrazioni, e sar anche possibile ordinare i registri per velocizzare i tempi di ricerca.
2. Selezionare un indirizzo
3. Aggiornamento server
Fase 4: Cliccare su "Upgrade Firmware" (Aggiornare Firmware ) per iniziare lupgrade del firmware. Nota: Ci vogliono pochi minuti per terminare il processo di upgrade. Non scollegare lelettricit durante lupgrade del firmware o lupgrade potrebbe non riuscire. La videocamera si riavvier dopo lupgrade. Fase 5: Selezionare lindirizzo IP della videocamera e cliccare su " stato aggiornato. " di nuovo per controllare se il firmware
3.4.4 E-Map
Video Viewer anche un software CMS (Central Management System), che permette il controllo e la gestione simultanea di un massimo di 16 dispositivi di rete. Nota: Prima di usare questa funzione, assicurarsi che Video Viewer sia collegato a tutti i dispositivi (16 al massimo) che si vogliono monitorare. E-Map disponibile SOLO quando il pannello di controllo impostato sulla versione completa di tutte le funzioni.
FASE 2: Fare clic col tasto destro del mouse nel pannello in alto a sinistra per mostrare il menu e selezionare il gruppo E-Map che si vuole aggiungere. Si possono aggiungere tre tipi di gruppo E-Map: Google E-MAP, Single E-MAP (E-Map livello singolo) e Building E-MAP (E-Map su pi livelli). Come si aggiunge un gruppo Google E-Map:
Inserire il nome del gruppo Google E-Map. Inserire un indirizzo specifico o punto di riferimento, e fare clic su Search (Cerca). OPPURE Spostare e trascinare la mappa sulla posizione desiderata. Fare clic e trascinare lindirizzo IP sul punto dove posizionato nel livello corrente. Fare clic su Apply (Applica) per salvare e completare.
FASE 3: Dopo avere creato il gruppo E-Map, nel pannello in alto a sinistra si vedranno tutti i dispositivi che sono stati aggiunti a questo gruppo.
Dispositivo Attualmente Selezionato Gruppo: Quartier generale Livello: 1 piano Dispositivo: 60.251.8.56
Icona
Descrizione
Il dispositivo collegato una telecamera. Quando selezionato, diventa di colore rosso.
Il dispositivo collegato il DVR. Quando selezionato, diventa di colore rosso. Apparir sullo schermo per attirare lattenzione in caso di qualsiasi movimento o allarme. Per sapere rapidamente che cosa sta succedendo, fare doppio clic sullicona del dispositivo su E-Map per mostrare la veduta dal vivo.
10
11
12
le configurazioni del sistema sono elencate in una struttura ad albero nel pannello a sinistra cos come segue.
Menu Principale
General (Generale) Log (Registro) Account OnLineUser Trigger
Menu Secondario
Network (Rete) QoS DDNS SNTP FTP MAIL Filter (Filtro) UPnP Video Color (Colore) Time (Modalit Ora)
Limitare il flusso di dati per il live streaming. Inserire le informazioni di DDNS quando il tipo di rete PPPOE o DHCP. Sincronizzare lorario della videocamera con i sistemi in rete del computer. Inserire le informazioni FTP per la notifica degli eventi quando "FTP" stato scelto in "General" (Generale) "Trigger". Inserire le informazioni Email per la notifica degli eventi quando " Email " stato scelto in "General" (Generale) "Trigger". Scegliere per autorizzare o bloccare lindirizzo/i che pu/possono accedere alla videocamera. Permetti che la videocamera sia rilevata tra i dispositivi allinterno della stessa area di rete per un utilizzo veloce e rapido. Imposta la risoluzione dellimmagine, la qualit e il frame rate. Regolare la resa del colore. Impostare lora legale e lorario attuale.
13
4.1 Generale
In "General" (Generale), possibile controllare le informazioni generali della videocamera, come ad esempio la versione del firmware e lindirizzo MAC e anche modificare il nome di identificazione della videocamera (fino a 15 caratteri alfanumerici).
4.1.1 Registro
Per cercare rapidamente il log di sistema per tipo di evento, cliccare la finestra a tendina per selezionare il tipo di log di sistema che si vuole controllare e cliccare su "Reload" (Ricarica) per aggiornare la lista. Per cancellare tutti gli eventi di sistema cliccare su Clear (Cancella).
4.1.2 Account
Potete creare un nuovo account con diversi privilegi di accesso per lutente, o cancellare o modificare le impostazioni di un account esistente.
14
Colonna
User Name (Nome utente) Password User Level (Livello utente) Life Time (Durata)
Descrizione
Impostare un nome utente da utilizzare per laccesso alla videocamera. Il nome utente pu essere composto da un massimo di 16 caratteri alfanumerici. Impostare una password da utilizzare per laccesso remoto. La password pu essere composta da un massimo di 16 caratteri alfanumerici. Impostare il livello di sicurezza di un account per fornire lautorizzazione al controllo delle differenti funzioni. Sono disponibili 4 livelli utente: Supervisore, Power User, Utente normale e Ospite. Permette di selezionare per quanto tempo consentito stare in linea a questo account (1 MIN/5 MIN/10 MIN/1 ORA/1 GIORNO/INFINITO).
Fase 2: Quindi, fare clic su Apply (Applica) per salvare le proprie impostazioni e creare un nuovo account.
15
4.1.3 OnLineUser
Potete controllare lutente/i attualmente online con le rispettive informazioni online. Per aggiornare la lista, cliccare su Refresh (Aggiorna).
4.1.4 Trigger
Potete impostare il rilevamento di movimento o lallarme e selezionare la funzione di notifica.
Impostazione Trigger In questa sezione, potete scegliere di attivare o disattivare lallarme o il rilevamento di movimento.
Voce
Alarm (Allarme) Motion (Movimento)
Descrizione
Selezionare per attivare o disattivare la funzione dallarme. Selezionare per attivare o disattivare la funzione di rilevamento di movimento. Impostazione dellarea di rilevamento del movimento Quando "Enable" (Attiva) selezionato, cliccare su "Setting" (Impostazione) per accedere alla pagina delarea di rilevamento del movimento come segue:
Sensibilit: Impostare la sensibilit di rilevamento (Alta/Normale/Bassa). Impostazione Area: Permette di impostare larea di rilevamento movimento selezionando le griglie con il mouse. Le griglie rosa rappresentano le aree che non sono rilevate, mentre le griglie trasparenti rappresentano le aree sotto rilevamento. possibile impostare pi aree per il rilevamento. Fare clic su - (Cancella tutto) per rimuovere il rilevamento dellintera area. Fare clic su + (Seleziona tutto) per impostare il rilevamento dellintera area.
Duration (Durata)
16
Impostazione Notifica In questa sezione, potete selezionare di attivare la notifica via E-mail e/o FTP quando scatta lallarme o quando viene rilevato un movimento.
Voce
Method (Metodo)
Descrizione
Email Quando viene scelta questa opzione la videocamera mander il video o limmagine registrati allindirizzo/i E-mail scelto/i quando scatta lallarme o quando viene rilevato un movimento. FTP Quando viene scelta questa opzione la videocamera in rete caricher il video o limmagine registrati sul sito FTP specificato quando scatta lallarme o quando viene rilevato un movimento.
Selezionare il tipo di file di notifica: H264 (video)/MPEG4 (video)/JPEG (immagine). Impostare il tempo di registrazione del video di notifica (1 ~ 5 secondi).
4.2 Rete
Selezionare "Network" (Rete) per adattare le impostazioni di rete al vostro ambiente di rete. Sono disponibili 3 tipi di connessione di rete: Static IP (IP Statico), PPPOE e DHCP.
Nota: Questa videocamera non supporta router POE o hub. Per IP statico:
a) Inserire le informazioni di "Server IP", "Gateway" e "Net Mask" ottenute dal vostro ISP (Internet Service Provider, Provider di Servizi Internet). b) Inserire il numero della porta. Il numero valido va da 1 a 9999. Il valore predefinito 80. Tipicamente la porta TCP usata dal protocollo HTTP 80. Tuttavia, in alcuni casi, meglio cambiare questo numero di porta per una maggiore flessibilit o protezione. c) Cliccare su "Apply" (Applica), e cliccare su "OK" per uscire dalla pagina delle impostazioni.
Per PPPOE:
a) Andare su "Network" (Rete) "DDNS", e selezionare "default" nella finestra a tendina "System Name" (Nome Sistema). b) In "Hostname", mantenere il valore di default, cio. LindirizzoMAC di questa videocamera, o cambiare il nome con uno che abbia un significato. E pi facile da memorizzare. c) Annotare lintero indirizzo della videocamera, per esempio, MAC000E53114389.ddns.dvrtw.com.tw.
Nota: Potete anche creare un account DDNS da un sito web che fornisce il servizio DDNS gratis. Fare riferimento alla APPENDICE 1 nella guida per linstallazione.
17
d) Andare su "Network" (Rete) e selezionare "PPPOE". Quindi inserire lo user name e la password ottenuti dal vostro ISP.
e) Cliccare su "Apply" (Applica), e cliccare su "OK" per uscire dalla pagina delle impostazioni.
Per DHCP:
a) Completare limpostazione del router DHCP. Prendere un router e collegarlo a Internet tramite il PC (con impostazioni IP statico o PPPoE). Sono disponibili diversi metodi di impostazione in relazione ai diversi router. Fare riferimento ai rispettivi manuali duso. b) Andare su "Network" (Rete) "DDNS", e selezionare "default" nella finestra a tendina "System Name" (Nome Sistema). c) In "Hostname", mantenere il valore di default, cio. LindirizzoMAC di questa videocamera, o cambiare il nome con uno che abbia un significato. E pi facile da memorizzare d) Annotare lintero indirizzo della videocamera, per esempio, MAC000E53114389.ddns.dvrtw.com.tw.
Nota: Potete anche creare un account DDNS da un sito web che fornisce il servizio DDNS gratis. Fare riferimento alla APPENDICE 1 nella guida per linstallazione.
f)
Cliccare su "Apply" (Applica), e cliccare su "OK" per uscire dalla pagina delle impostazioni.
Fase 3: Disconnettere la videocamera e il PC e connetterli a Internet separatamente. Fase 4: Aggiungere lindirizzo IP o lhost name della videocamera in " " di Video Viewer con lo user name e la password corretti e cliccarlo due volte per vedere se riuscite ad accedere alla videocamera.
18
4.2.1 QoS
QoS, Qualit del Servizio, la capacit di controllare il flusso dei dati per lo streaming in tempo reale. Questa funzione importante se la larghezza di banda della vostra rete insufficiente e avete altri dispositivi con i quali condividere la larghezza di banda della rete. Controllare "QoS Enable" (Attivazione QoS) e impostare la velocit massima di caricamento da 256 a 10240 kbp.
4.2.2 SNTP
SNTP (Simple Network Time Protocol) (Protocollo Orario di Rete Semplice) usato per sincronizzare lorario della videocamera con i sistemi in rete del computer.
Funzione
GMT (Tempo del meridiano di Greenwich) Server Name (Nome del Server) Sync. Period (Periodo di Sincronizzazione) Sync Server Time (Sincroniz. Orario Server)
Descrizione
Una volta che gli utenti avranno scelto il fuso orario, la videocamera in rete regoler automaticamente lorario dellarea locale del sistema. Utilizzare il server di default SNTP (Per esempio, tock.stdtime.gov.tw) o cambiare con un altro server con il quale gli utenti hanno familiarit. Selezionare "Daily" (Giornaliero) per sincronizzare lorario della videocamera con lorario di rete ogni giorno o "None" (Nessuno) pe disattivare questa funzione. Cliccare e la videocamera sincronizzer lorario con lorario di rete.
4.2.3 FTP
Inserire le informazione FTP dettagliate e cliccare su Apply (Applica) per confermare. Le informazioni qui impostate saranno applicate quando viene selezionato FTP in General (Generale) Trigger.
19
4.2.4 MAIL
Inserire le informazioni email dettagliate e cliccare su Apply (Applica) per confermare. Le informazioni qui impostate saranno applicate quando viene selezionato Email in General (Generale) Trigger.
Funzione
Server Mail From (Posta da) Verify Password (Verifica password) Email Address (Indirizzo email)
Descrizione
Inserire lindirizzo del server SMTP fornito dal proprio provider di posta elettronica. Inserire lindirizzo email intero per assicurare che le email non verranno bloccate dallSMTP. Alcuni server di posta richiedono di verificare la password. Inserire il nome utente e la password. Aggiungere lindirizzo email del destinatario assegnato.
4.2.5 Filtro
Scegliere per autorizzare o bloccare lindirizzo/i che pu/possono accedere alla videocamera.
Funzione
Error Login Count (Errore Conto Login) Error Lock Time (Tempo di blocco Errore)
Descrizione
Impostare il numero massimo di login errati. Quando viene raggiunto il numero massimo, lindirizzo IP che sta tentando di accedere alla videocamera in rete verr bloccato. Impostare il tempo di blocco in minuti quando il numero massimo di login errati per un indirizzo IP stato raggiunto.
20
Funzione
Echo Request (Richiesta Echo) Filter (Filtro)
Descrizione
Selezionare "Non-Block" (non Bloccare) per autorizzare altri utenti a pingare per risalire allindirizzo IP della videocamera in rete, o "Block" (Bloccare) per rifiutare la richiesta di effettuare il comando di ping. Scegliere di attivare YES" (SI) o disattivare (NO) la funzione filtro. Se viene selezionato YES" (SI), scegliere se volete permettere (Autorizza) o bloccare (Rifiuta) lindirizzo IP elencato di seguito. Per aggiungere una voce alla lista degli indirizzi IP, digitare lindirizzo IP in "Indirizzo IP" e cliccare su "Add" (Aggiungi). Per rimuovere una voce esistente nella lista di indirizzi IP, cliccare sulla voce che si vuole rimuovere e cliccare su "Delete" (Cancella).
Apply (Applica)
Cliccare su "Apply" (Applica) nellangolo in basso a destra quando viene effettuato un cambiamento in questo men, o il cambiamento non verr registrato nel sistema.
4.2.6 UPnP
"UPnP" lacronimo "Universal Plug and Play", che permette ai dispositivi di collegarsi ininterrottamente negli ambienti home e corporate e di semplificare linstallazione dei componenti del computer. Controllare "Enable UPnP" (Attiva UPnP) per permettere alla videocamera in rete di essere individuata tra i dispositivi nella stessa area di rete, e impostare il nome di identificazione della videocamera in Friendly name".
Quando questa funzione attiva, laltro PC nello stesso dominio di questa videocamera potr ricercare la videocamera in "Network Neighbor" (Vicino di Rete) con il nome di identificazione impostato in "Friendly name". Cliccare due volte per aprire velocemente il browser per accedere alla videocamera. Per dettagli sullaccesso alla videocamera via browser, fare riferimento alla sezione "5. ACCEDERE ALLA VIDEOCAMERA VIA BROWSER" a pagina 23.
4.3 Video
Imposta la risoluzione dellimmagine, la qualit e il frame rate.
Voce
JPEG/MPEG/H264
Descrizione
Selezionare la qualit e la risoluzione dellimmagine. Risoluzione Immagine: CIF/4CIF.
21
Voce
Frame Rate
Descrizione
Qualit Immagine: MIGLIORE/ALTO/NORMALE/BASSO. Il frame rate autorizzato per ogni osservatore pu essere adattato alla larghezza della banda della rete. Impostare la frequenza di immagine desiderata sul massimo (FULL) o su uno specifico frame rate (1/2; 1/3; 1/4; 1/5; 1/10; 1/15; 1/20; 1/25; 1/30). Il valore del frame rate attuale dipende dalla connessione di rete attuale, e pu essere inferiore a quello specificato.
4.4 Colore
Regolare la resa del colore da Brightness (Luminosit) , Contrast (Contrasto) Hue (tono) e Saturation (Saturazione). Cliccare e trascinare il cursore per lanteprima del cambio di colore sul pannello live view e regolare il colore dellimmagine. Quindi, cliccare su Apply (Applica) per confermare il cambiamento. Per ripristinare i valori di default, cliccare su "Default", e cliccare su "Apply" (Applica) per confermare il cambiamento.
Funzione
Daylight Saving (Salv. Luce Diurna) Time (Ora)
Descrizione
Permette di specificare se usare lora legare (ACCESO/SPENTO). Se questa funzione viene attivata, impostare il periodo di tempo (AVVIA/FINE) e regolare lora legale in ore (REGOLA). Impostare lorario corrente.
22
Fase 3: Quando il login effettuato con successo, verr visualizzato il live view come segue.
23
Funzione
Media Type (Tipo di Media)
Icona
--
Livello utente
Supervisore/Utente power/Utente normale/Ospite.
Descrizione
Selezionare dallelenco a tendina il formato di trasmissione web: H.264/MPEG-4/Motion JPEG/QuickTime. Per gli utenti che usano Mozilla Firefox, selezionabile solo "QuickTime". QuickTime un software multimediale della Apple Inc. necessario che QuickTime sia installato nel sistema operativo prima di selezionarlo. Quando sar selezionato, sarete autorizzati ad inserire lo user name e la password per accedere alla videocamera. Cliccare e trascinare lo slider per selezionare la qualit del video: Migliore/Normale/Alta/Base. Selezionare la risoluzione video dallelenco a tendina: 4CIF/CIF. Cliccare per accendere/spegnere la funzione audio. Cliccare per visualizzare uno snapshot dellimmagine corrente e una nuova finestra del browser verr aperta per visualizzare limmagine registrata. Cliccare per ruotare limmagine di 180 in senso antiorario se necessario. Cliccare per visualizzare limmagine a schermo intero.
Video Quality (Qualit Video) Video Resolution (Risoluzione Video) Interruttore Audio
--
Supervisore/Utente power/Utente normale Supervisore/Utente power/Utente normale Supervisore/Utente power/Utente normale Supervisore/Utente power/Utente normale Supervisore/Utente power/Utente normale Supervisore/Utente power/Utente normale
Istantanea
Menu Principale
Network (Rete)
Menu Secondario
Network (Rete) QoS Wireless DDNS SNTP FTP Mail Filter UPnP
Riferimento
Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Network (Rete) Network (Rete) QoS
Fare riferimento alla APPENDICE 2 nella guida per linstallazione. Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Network (Rete) Network (Rete) Network (Rete) Network (Rete) Network (Rete) Network (Rete) Color (Colore) Time (Ora) DDNS SNTP FTP MAIL Filter (Filtro) UPnP
Camera
General (Generale)
General (Generale) Server Log (Registro server) Login Account Trigger Video
Custom Setting (Impostazioni Personalizzate) Remote Config. (Configurazione Remota) General (Generale) Log (Registro)
Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota) Remote Config. (Configurazione Remota)
Vi permette di sapere dove si trova la videocamera in rete. Il sistema vi richieder di applicare una Chiave Goole Maps se laccesso vi negato. Seguire le istruzioni di seguito se laccesso vi negato: 1. Google Maps 2. 3. Cliccare su "Sign up for a Google Maps key" (Registrarsi per una Chiave Google Maps) per accedere alla pagina di applicazione. Controllare i termini e le condizioni, e inserire lindirizzo IP della videocamera in rete. Quindi cliccare su "Generate API Key" (Generare Chiave API). Copiare la chiave API generata e cliccare su "Update Google Maps Key" (Aggiorna Chiave Google Maps) sul browser per incollarla.
Upgrade (Aggiorna)
. Fare riferimento alla sezione 3.4.3 Upgrade del Firmware a pagina 8, per i dettagli.
25
26
Formatta
Rimuovi
Controllo riproduzione
Barra davanzamento
27
APPENDICE 1 SPECIFICHE
Modalit di Risoluzione Standard. Rete Porta LAN Velocit LAN Protocolli Supportati Porta USB Caratteristiche Wireless (optional) SI Base 10/100 DDNS, DNS, PPPoE, DHCP, NTP, SNTP, TCP/IP, UDP ICMP, SMTP, FTP, HTTP, RTP, RTSP Per dongle wireless opzionale e flash drive USB (1) Supporta dongle wireless 802.11 n/b/g (WU5214) (2) Modalit Ad-Hoc e infrastruttura (3) Funzione WPS con "Push Button Config" (Premi Pulsante Configurazione) NTSC: 30, PAL: 25 10 Accesso utente a livelli multipli con protezione della password, WEP 64/128 bit, WPA-PSK, WPA2-PSK (1) Software "Video Viewer" concesso in licenza per controllare fino a 16 videocamere in rete simultaneamente (2) Interfaccia AJAX di gestione utente per browser Video/Audio Compressione Video Telecomando Video Regolazione Video Mobile Compressione Audio Ingresso Audio Uscita Audio Camera Sensore Immagine Pixel Lente Numero F Angolo di Visuale Velocit Otturatore IR LED Illuminazione Minima Output video BLC Auto-regolazione Altri Telecomando Rilevamento di Movimento Notifica Allarme e Eventi I/O Generale Alimentazione Temperatura operativa Umidit SI SI Caricare immagine su FTP e Email Alarm x1 CC 12V, 1A 0~40C 85% Pentium 4 CPU 1.3 GHz o superiore, o equivalente AMD 256 MB RAM Graphics card AGP, Direct Draw, 32 MB RAM Windows Vista, XP, Windows 2000 Server, ME, 98, DirectX 9.0 o successivo Internet Explorer 6.x o successivo 152.5 (L) x 115.2 (W) x 40.2 (H) (6.00" x 4.54" x 1.58") 812 g (1.79 lbs) incluso il sostegno per il montaggio e lalimentatore elettrico Allinterno Sensore immagine CCD 1/3" NTSC: 512(H) x 492(V) / PAL: 512(H) x 582(V) F1.9 60 1/60 (1/50) ~ 1/100,000 sec. S 0 Lux (10 m IR ON) 1.0 Vp-p. 75 AUTO ATW Sensore immagine CCD Alta Risoluzione 1/3" NTSC: 768(H) x 494(V) / PAL: 752(H) x 582(V) H.264 / MPEG4 / MJPEG SI Luminosit ,Contrasto, Tono, Saturazione Supporta la sorveglianza con telefoni cellulari 3G. ULaw, 128 kbp Microfono Integrato, Entrata Microfono Esterno. S Modalit di Risoluzione Alta
f4.6mm
28
PRODUTTORE Transcend
A-data Sandisk
U208 F200 Micro Vault Tiny 2G Micro Vault Tiny 4G Micro Vault Tiny
29