3 & 15kV PIX-A METAL-CLAD SWITCHGEAR te
with HVX Vacuum Circuit Breakers é
INSTALLATION - COMMISSIONING
OPERATION - MAINTENANCE
‘AREVA TaD inc. S845 Covlure BG, ankeal HIP TAB Conoae
Prone : (S14) 529-3912, Fox: (5 11, weecrave.com
349022188 |§34902-15-B
AREVA T&D to your service
Operation and maintenance may only be caried out by personnel who have
received suitable authorization for operations and maneuvres they are responsible for
performing, if this is not the case, please contact the AREVA T&D After-Sales
Department.
The AREVA T&D can provide well-trained Field Service Representative to provide
technical guidance and assistance for installation, repair and maintenance of AREVA
PIX-A switchgear and its components.
For more details, please, contact sales offices or factory at :
1.866 837-7170 or 1(514) 329-3912.
Your contacts
Canada:
AREVA T&D inc.
5845 Couture Blvd. Montreal, Canada, HIP 1A8
Phone Number: — 1 (514} 329-3912
Fax Number: 1 (514) 329-3911
E-mail: ide.webmaster@arevo-td.com
Web: www.areva-td.com
CUSTOMER HOT LINE SERVICE:
1-866-837-7170 24 hours a day/7 days a week34902-15-B
Notes concerning this User Manual
THIS USER MANUAL ON
Responsibilities
Our devices are quality c
LY DESCRIBES 5 & 15 kV METAL-CLAD SWITCHGEAR
PIX-A AND THEIR COMPONENTS.
-ontroll
standards and regulations currently in fore
efficiency and life depen:
and operation Instructions described In this User
led and inspected in the factory in accordance with
“é in North America, The apparatus
‘don the compliance with the installation, commissioning
sf manual.
Non-compliance with these instructions Is llable to affect your warranty rights
(Refer to ANNEX for General
The user is responsible for
personnel in contact wi
operating procedures (2.9. limitation of acc:
communicating the
| terms & Conditions of sales)
safety instructions and practices to the
th this switchgear equipment. The user should develop
‘ess, permit fo work forms, padiocking and
fag procedures) and select the appropriate people for the activities needed for
operating, inspecting, maintaining ar
supplant the user's safety
On commissioning and during normal
program.
nd testing the switchgecr. This manual does not
operation of equipment, the general electrical
safely instructions must be respected {helmets, gloves, insulating stools, etc.), as well
‘as the operating instructions.
Local requirements, especially about safety (operators ‘and operations) and which
are in accordance with the indications
CONVENTIONAL SYMBOLS
given in this document, mus! be observed.
this warning must be respected. Failure to follow this recommendation could cause.
serious property damage, personal injuries or death.
WARNIN‘
iG!
CAUTION! — —
Be vigtlant! Precautions fo be taken to avold accidents or injures. j
CAUTION :
Instructions in this mi
installation, testing, opers
anual are not si
-2-
wuificient for unqualified persons and!
\inexperienced electricians doing any work required, including the storage handling,
‘ation, inspection, maintenance or repair. The switchgear and
thelr components covered by thls manual, must be Installed, operated and!
Imaintained by qualfied persons who are well-trained and understand all of hazards”
o
o
+
+
¢
¢
o
e
@
e
€
e
«
«
f
(
(
‘
'