Professional Documents
Culture Documents
£24.99
This interface (adapter) is used as an interface and a serial cable to connect an ISO compliant vehi
It is fully compatible with the diagnostic software version 409.1 from VAG-COM. VAG-COM is a softw
It is also compatible with the VOL-FCR PC based Volvo Code Reader software which can be downloa
You can also use it with other software that require a passive ISO compliant interface, examples of
Technical Specification:
Supported Software:
Ross-Tech VAG-COM
Versions: 3xx, 409
VW-Tool
AlfaDiag
Alex Peper's OBD-II Tool at http://www.obd-2.com/. Please note that this will not work unless you
VOL-FCR PC Based Code Reader for Volvos
BMW Cartune
ShadeTree Software ProDiag 1.0x (for PalmOS)
Palm III, Palm V/Vx, Palm VII, HandSpring Visor Series, HandEra TRG, SONY
Please visit ShadeTreeSoftware's website for complete list of compatible PDAs.
VAG Diagnose (for DOS)
Supports powerful Direct Memory Access (DMA) which allows users to modify RAM/EEPROM/SEEP
REVO Lemmiwinks ECU Tuning
APR Immobiliser Information Reader
LINUX based freeware OBD-II tool FreeDiag
ECU Tuning Applications (please consult the vendors)
Other diagnostic and tuning software.
How To Use:
Turn the car's ignition switch ON. No need to start the engine.
Start the VAG-COM program, click "Options", select the correct communications port. Use "Test"
Your interface now works! Make sure the software can reliably access all the control modules tha
t an ISO compliant vehicle to a PC for on-board diagnostics (OBD). Such vehicles are VW, Audi, Seat, Skoda, V
OM. VAG-COM is a software program that turns your PC into a sophisticated VW/Audi diagnostic tool, which p
interface, examples of which are listed below in the Supported Software section.
ny more...
ke serial EEPROM programming and ECU Tuning
WM or CAN.
will not work unless you register the software with Alex.
dify RAM/EEPROM/SEEPROM directly through the cable without ever touching the controller cover
ations port. Use "Test" to confirm that the program can use the port and find the interface. Then "Save".
he control modules that it should in your car.
VW, Audi, Seat, Skoda, Volvo, Opel, Vauxhall, Alfa, Mercedes, BMW, etc.
diagnostic tool, which performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more .
roller cover