Professional Documents
Culture Documents
RSF-AT-40 (SS)
RSF-AT-40 (SS) _____________________________________________________________________________________ Application Silicone based finishing Softener for exhaust & padding applications.
Chemistry for Performance Excellent softness and superior surface smoothness, with good bulk. Non-yellowing. Retains brilliancy and brightness. Can compete with silicones and cationics with better performance & economics. Low foaming in nature. No tonal variation. No reduction in fastness properties. Shear stable for silicone spotting.
Product gives good cost saving with performance due to lower dosage.
Physical Properties
Product
pH
Mixture of fatty acid esters & emulsifiers with silicone Biodegradable, Eco-friendly
5.5 6.5
S. No.
1. 2. 3 5. 6.
Substrate
Woven Cotton Cotton Knits (Dry) Cotton Knits (W/W) Polyester & its blends Velvet
Method
Padding Padding Padding Padding Padding
Recommended Doses
5-40 gpl 5-20 gpl 20-40 gpl 2.5 10 gpl 2.5 10 gpl
Note: For exhaust dosage recommended is from 0.5-10gpl depending upon finishing requirement.
Application Maintain the pH between 5.5 - 7 by Acetic Acid Check feel after conditioning only Special Note Higher the temperature of curing, better will be the result. Our softener will show expected result after complete conditioning of the fabric. The dose level is to be decided as per the individuals requirement and their finishing cost. Shear stable silicone. Can be used in soft flow and jet.
The literature indicates general information guidelines on our product for their use. The user should check the suitability of the product for their use. RAN/RSA makes no warranty of any kind expressed or implied. Industrial safety practice is to be followed. RAN/RSA takes no responsibility and expressly disclaim liabilities for law, damage or expense rising out of or in any way connected with the handling, storage, use or disposable of the product.