Operator and Assistant. a. Fall of person from height MH
Persons nearby or passers-by. b. Fall of person on same level MM All operatives working in the vicinity. c. Fall of person into/through hole ML d. Fall of object from height MM e. Fall of object at same Level Control Measures f. Protruding objects ML g. Flying objects HH 1. Normal trade safety rules to be applied for operation of compressor, care use of hoses h. Manual handling/lifting MM and couplers. Use of Dead Man levers and control of static electricity. i. Machinery LL 2. Safe system of work (Permit to Work when necessary) agreed/discussed before work J. Vehicular commences. k. Mechanical lifting ML 3. Operators trained/qualified/competent l. Mechanical handling 4. Correct use of Personal Protective Equipment to include - Boots, Overall, Gloves/ m. Confined space MH Gauntlets, Hearing Protection, Face Mask/Visor/Goggles, Ventilation Hoods, Plus n. Cleaning/purging any other equipment as specified on the Permit to work. o. Maintenance 5. Hose routes to avoid roads and hazardous areas. p. Pressure systems HH 6. Sitting of hopper, access for bulk materials (grit). q. Electrical 7. Correct Manual Handling techniques. r. Fire 8. Segregate hopper activities away from gun/work. s. Explosion/bursting HM 9. Good Housekeeping. t. Water 10.Good Access and escape. u. Asphyxiation ML 11.Segregate activity from other operatives. v. Inhalation HH 12.Ensure tented area or covering (when used) is adequate for purpose. w. Contact HM 13.Precautions for slipping and tripping hazards. x. Noise & vibration HH 14.Awareness and/or guarding for trapping hazards (Machinery hazards) y. Ionising radiations 15.Information about hazards to body and skin on contact with high velocity blasting z. Non-ionising radiations grit. Safe working practices to include Dead Man Levers. aa. Handtools 16.Information on safe lifting and slinging procedures. bb. Electrical handtools. 17.Protection from falls - barriers, fall arrest equipment etc. cc. Climatic 18.Precautions when working with pressure systems and compressed air. dd. Hazardous substances HH 19.Precautions to protect from flying particles and grit. ee. Collapse of stacking/structure HL 20.Information on the risks from Hazardous Substances/MSDS. ff. Housekeeping ML 21.Information and protection from risks to Hearing - Noise Control measures. gg. Inadequate lighting or visibility ML 22.Precautions when working in Confined Spaces to Include Ventilation, Inhalation hazards, hh. Weld failure use of safety Back up Man, increased Noise hazards.(Confined Space Permit to Work|). ii Other NICO INTERNATIONAL RISK ASSESSMENT RISK ASSESSMENT NUMBER: 29 ACTIVITY: Shotblasting