Professional Documents
Culture Documents
service manual
Catalog
-1-
1.1.4 About placement position
1. Never place DVD player in positions with high temperature and humidity.
2. Avoid placing near high magnetic fields, such as loudspeaker or magnet.
3. Positions for placement should be stable and secure.
-2-
1.2.6 Element substitution method
When some elements cannot be judged good or bad, substitution method may de adopted directly.
-3-
Chapter Two
2.1 Features
This player utilizes color TFT LCD and new generation DVD decoding chip with built-in Dolby Digital
decoders which can bring you to a brand-new AV entertainment world. The 2-laser super error correction
mechanism supports CD-R
Brand-new AV Effects.
1.7”color TFT LCD.
2.Compatible with MPEG4 discs to produce wonderful pictures.
3.Built-in Dolby Digital decoder.
4.Built-in stereo speakers.
5.Hi-Fi stereo headphone output.
High Quality Digital Audio
1.Built-in Dolby Digital and DTS digital surround decoder
Numerous Convenient Functions
1.Screen saver function cautiously protects your LCD and TV.
2.Large capacity solid Li-Ion battery, electronic anti-shock circuits, convenient for you towatchmovies
outdoors.
3.Easy-to-use brand-new GUI and virtual keyboard.
4.Multi-angle playback functionmakes it possible for you to view a scene from different camera angles.
5.Direct entry to desired scenes (title/chapter/time/track search).
6.Multiple aspect ratios to fit various TV sets.
7.Parental control function to protect children from watching inappropriate discs.
8.Multiple dubbing languages and subtitle languages keep you in thebestentertaining status anytime.
Supports SVCD, VCD, CD, MP3, HDCD, KODAK PICTURE CD, DVD-R/RW.
NOTE:Some discs labelled with MPEG4 on the market actually are*.rm/*.ram/*.rmm/*.ra and others
which are imcompatible. Please take care when buying discs.
2.2 Control Button Locations and Explanations
3
19
4
5
6 18
7
17
8 16
9 15
10 14
13
11
12
-4-
1 Color TFT LCD 11 Power indicator
2 Speakers 12 IR sensor
3 PICTURE Button 13 STOP Button
4 DVD/AUX IN Button 14 Keyboard/SWITCH Button
5 SETUP Button 15 REW Button/ DOWN direction arrow
6 FWD Button/UP direction arrow 16 NEXT/RIGHT Button
7 PREV/LEFT Button 17 MENU Button
8 OPEN/CLOSE Button 18 TITLE Button
9 PLAY / SELECT button 19 Q-PLAY Button
10 PAUSE button
1 2 3 4
5 6
-5-
2.3 Remote Control Illustration
1 NUMBER Buttons
2 GOTO button
Play from the desired location.
1 3 PLAY Button
Normal playback.
2 4 STOP Button
19
3 Stop playback.
18
4 5 SUBTITLE Button
17
5 Change subtitle languages/Switch JPEG
16
6 15 display modes.
7 6 CURSOR Buttons
14
8 7 SELECT Button
13
8 TITLE button
9 12
DVD titles.
10 11
9 REW Button
Fast backward play.
10 FWD Button
Fast forward play.
11 PREV Button
Skip backward.
12 NEXT Button
Skip forward.
13 SETUP Button
Function setup.
14 REPEAT Button
Repeat play.
15 ANGLE Button
Change camera angles, MP3/JPEG playback
modes switch.
16 MENU Button
Display DVD menu or open/close PBC.
17 OSD Button
Display or hide disc information.
19 PAUSE Button 18 AUDIO Button
Pause frame by frame. Change the audio language or audio channel.
-6-
2.4 Accessories 4. Press UP/DOWN arrow to select the desired
value. Press SELECT to confirm it.
AV Cords 1PCS For example: Press UP/DOWN arrow to select
Remote Control 1PCS "LT/RT", than press SELECT, the TV screen
AAA Size Batteries 2PCS Display:
Instruction Manual 1PCS
Battery Pack 1PCS
Power Adapter 1PCS
— — Audio Setup Page — —
Warranty Card 1PCS
Audio Mode LT/RT
EQ Type Stereo
TV Display Wide
OSD Lang English
Screen Saver On 2.5.2 General Settings
Spectrum Off
-7-
◆Default: ON 2.5.4 Initial Setup
4.Spectrum:This item is used to set whether the
Dynamic Spetrum is allowed.
◆Selectable value:ON,OFF.
◆Default:OFF — — Preference Page — —
PBC On
2.5.3 Audio Setup Audio English
Subtitle Off
Disc Menu English
Parental Off
Password
Default
— — Audio Setup Page — —
-8-
◆When changing the parental control ratings, a password is needed. Refer to the following password
item for detailed settings.
6. PASSWORD: To set a four digit password to enable you to change the parental control ratings.
◆Default: 7890.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
OK
7. DEFAULT: To restore all settings to the default value except for the parental control and password
settings.
2.5.5 Useful notes
◆In order to prolong the service life of your player, it is recommended to wait at least 30 seconds before
you turn it on again after switching it off.
◆Turn off power after operation.
◆Only use the power supply of the nominal voltage, otherwise the player will not be operational or even
be damaged.
◆Some functions of the player may not be applicable to some discs.
◆In case of occasional player halt, please turn it off and turn it on again.
◆This player cannot play some SVCD discs with the CVD format.
◆When to use the Audio Output of this unit, please minimize the phone volume first.
2.6 Specifications
DVD VIDEO
SVCD,MPEG4
Disc Types VCD1.0,1.1,2.0
CD-DA
MP3
Analog audio output Stereo output,
Output Headphone output
Video Output
Video
Video Amplitude 1.0Vp-p(75Ω)
Characteristics
Frequency 20Hz~20kHz(±1dB)
Audio
Signal-to-noise Ratio >90dB
Characteristics
Total harmonic distortion <0.01%
Power Supply DC 9V 2A
General Power Consumption 12W
Specifications Dimensions 205mmX149mmX39.5mm
Mass 735g
Operating
5℃~35℃
Temperature
Operating
15%~75%(no condensation)
Humidity
-9-
Chapter Three Principle or Servicing
ALIN
ARIN
Loader AL LOUT
Focus, MT1389 E
trace Audio filtering/
drive Servo drive AR amplifying ROUT
signal input
Feed, LSOUT
main axis Headphone/
drive speaker
amplifying RSOUT
LM4863
VCC
+9VIN DC-DC
conversion circuit Dv33
FLASH (16M) Reset circuit SDRAM( 64M ) CVBS1
+9VIN
Charge control circuit Battery
components
- 10 -
3.1.2 PCB composition block diagram of the player
PCB composition diagram of the player is shown as in the following figure 3.1.2.1:
Battery
components
Main panel Loudspeaker TFT GND
5VA
LCD VGL
VOUT+ TEMP COUT- GND V33 VSDA VGH
STV1
9VIN STV2
Jk602 Xs501
PGND GND CKV
Xs801
STV1 Jp2 U/D
STV2 Jp1 OEV
Charge board BATTY_LED CKV VCOM
U/D Drive board VCOM
Jk603 CHECK Jk101 OEV L/R
COVER_SW VCOMO Xs701 STH2
GND Jp3 STH1
GND VIN+9V OEH BLGND CPH1
STH2 BLCLT CPH1
DC socket board STH1 BL+9V CPH1
Xs101 Jp6
GND +5V 5VA
A/B/C/D/E/F CPH1 +5V GND
BL BL
SP- GND GND VR
BL9V CTL GND
SP+ VR SR- VG
Loader SL+ VG SR+ VB
Xs102 VB SL- VDD2
SL- SL- Boost board
GND GND
LIMIT
- 11 -
U204 24C02 EEPROM
- 12 -
Section Two Unit Circuit Principle
XS101 A B C D E F RFO
TK- FOSO
TK+
FMSO
FC+ MT1389
TRSO
FC-
DMSO
SL+
Feed electric machine
SL-
D5898
SP-
Main axis electric machine
SP+
2. Working principle: after power on or turning off door (door detect switch SW601/SW602 on
charge board shouts off), loader laser head begins to reset, focus and main axis begin to rotate, laser
head begins to identify disc information to judge the disc is CD or DVD to facilitate to make the
corresponding acts. At the same time, Mt1389 also adjusts laser output power through laser power
control circuit. When loader reads disc information, after photoelectric conversion, A, B, C, D, E, F
signals are formed to give to Mt1389 (DVD has A, B, C, D signals only) and Th erefore signal and the
input from pin 2~11, 18, 19 of MT1389. After MT1389 internal pre-amplifying processing, now signal are
divided into two parts inside MT1389:
- 13 -
After being processed by digital servo signal circuit inside MT1389, one part of signal form
corresponding servo control signals and output FOO, TRO, DMO, FMO digital servo control signals from
pin 42, pin 41, pin 37, pin 38 of Mt1389 respectively, then change into analog servo control signal FOSO,
TRSO, DMSO, FMSO through integration circuit composed by resistor capacitor, and send to driver
circuit BA5954 for amplification to bring along focus coil, trace coil, main axis electric machine and feed
electric machine after drive amplification. Among these, focus and trace servo are used to correct
objective position accurately; feed servo is used to bring along laser head to make radial large-scale
move which belongs to the preliminary adjustment to pick-up position; and main axis servo is used to
control main axis electric machine to make it read signals in means of constant linear velocity and bring
along disc to rotate. After processing of amplification by VGA voltage control amplifier and equalization
frequency compensation inside MT1389, another part of signals are changed into digital signals through
internal A/D converter. When loader is reading CD/VCD signals, these signals are conducted EFM
demodulation inside MT1389, after CIRC (Cross-Interleaved Reed-Solomon Code) error correction is
finished inside, it outputs to rear state for audio/video decoding; when loader is reading DVD signals,
these signals are conducted ESM demodulation inside MT1389, and then sent to latter stage for
decoding after finishing RSPC error correction inside. Compared with general DVD players, this
machine has no disc in/out circuit and manual opening method is adopted. When pin 148 of MT1389E is
high level, system recognises that the door has been opened, when it is low level, the machine
recognizes that the door has been closed.
1 F- Input loader 2.52 2.34 0.46 Focus error signal is added to two sides of
pick-up focus coil
2 F+ Input loader 2.49 2.49 0.93
3 T+ Input loader 2.53 2.51 0.94 Trace error signal is added to two sides of
pick-up trace coil
4 T- Input loader 2.58 2.51 0.93
8 RF Input MT1389 2.21 2.53 1.28 The sum of disc data signal
- 14 -
14 Vcc Input loader 5.04 5.04 5.02 Supply voltage for loader
20 MDII Input MT1389 0.21 0.2 0 CD and DVD laser power monitoring signal
23 LD-DVD Input loader 2.21 0.1 0 DVD laser power control signal
AVCC
R102 R103
100K 10K
R104 IOA
V101 10K
- 15 -
2. Working principle: after disc is loaded in machine, IOA port is defaulted high level to make Vd102
saturation on and form loop with CD laser power control circuit on loader, at the same time IOA also
reaches loader PD IC for switch, disc begins to rotate; when servo processing system recognises that
the disc inside machine is not CD, IQA pin outputs low level to make Vd102 cut off, Vd101 on and form
loop with DVD laser power control circuit on loader to carry out the action of reading DVD disc. After
door is opened, IOA still keeps the state before door is opened. If machine cannot recognises which the
disc is , IQA pin will switch always until no disc is read out or judged by system.
Note: V303, V304 are MOS pipes (pressure drop is small when saturation on).
4.7R
C106
106
LDO2 22
23 DVD VD103
2SB1132-S
XS101 20/21
MT1389
19 CD
VD104
2SB1132-S LDO1 23
C107
106
LDO-AV33
R107 4.7R
2. Working principle: pin 20/21 of MT1389 is laser power detect signal input pin, pin 21 is DVD laser
power strong/weak detect signal input pin, pin 23 is VCD laser power drive control output pin, pin 22 is
DVD laser power drive control output pin.
When reading VCD disc, laser power becomes weak, voltage of MDII pin decreases; when voltage
of MT1389 decreases, voltage of pin 19 of XS101 increases to reach the function of boost laser power;
when laser power is too strong, voltage of MDI pin increases to make voltage of MT1389 increase and
voltage of pin 19 of XS101 decrease to reach the purpose of lowering laser power to form a automatic
power control circuit. When reading DVD disc, pin 21 is detect signal input pin, pin 22 is drive control
output pin and the working principle is the same with that when playing VCD disc.
- 16 -
3.2.4 Main axis control circuit
1. Main axis control circuit is shown as in the following figure 3.2.4.1:
104/DNS
C113
222 C114
OPO ADIN
R108 R109
680K 0R
OP-
OP+
MT1389E
R110 R113
150K C115 R114
150K 222 680K
R111 V1P4
DNS
R112 XS102
SP- 1R 6
SP+ 5
SL+ 4
SL- 3
2
LIMIT 1
PH-6
2. Working principle: MT1389E has a comparator composed of operational amplifier inside. When
door is opened, disc is always rotating, so a braking signal is required to make main axis electric
machine stop rotating immediately to realize the purpose that disc can stop rotating during a short
period after door is opened. In the course of playing, if “OPEN”button is pressed, main axis drive signal
disappears, but main axis electric machine is still in rotating state because of inertia function. The
induced voltage achieved by induced electromotive force produced by electric machine running on
sampling resistor R321, R340, after sampling through resistor R112/R110/R113, input to pin 35, 36 of
MT1389,and output from pin 34 after Mt1389 amplifying processing inside, after D/A conversion and
relevant processing inside Mt1389, an instant electric machine reverse braking signal is outputted to
make main axis electric machine speed down. This machine is manual open/close means, so disc is still
rotating after door is opened but it will stop very soon.
- 17 -
2. Working principle: when switch is closed, EN1 EN2 of AM5898 is low level, DC-DC circuit has no
function, machine is in power off state, but after Sw901 is disconnected, EN end is high level, DC-DC
circuit begins to work. Take VCC for instance, we give explanation to voltage regulating of circuit:
DC-DC circuit begins to oscillate, its working frequency is in 240khz, Sw pin outputs on/off signal.
When grid electrode of QB902 is high level, MOS pipe is on, +9V power reaches L902 TC907 through
MOS pipe to save energy for inductor and charge capacitor, D904 freewheeling diode, when MOS pipe
is cut off, L discharges energy and its induced electromotive force makes diode on, at the same time
TC907 discharges the load with current direction unchanged to form a series connection switch voltage
regulating circuit. When output voltage is on high side, it has the following changes: VCC increases ―
COMP2 increases SW2 on/off frequency turns low ― VCC decreases. When voltage is on low side, the
course is opposite to that of increase. R912 is over-current protection circuit sampling resistor. (DV3.3
circuit principle is the same with that of VCC)
As shown in the figure 3.2.5.2, when machine is in DVD, SELECT pin of decode chip outputs a high
level to make servo drive circuit enter working state and reach Vd1 saturation on at the same time,
VD901 is cut off, Qb904 is cut off, DC OUT has no power output. When machine is switched to external
input, SELECT pin of decode chip outputs a low level to make servo driver circuit not work, VD1 is cut off,
VD901 is saturated, QB904 is saturated, DC OUT outputs VCC to provide for TV box. (CON3 is DC
output socket)
JK901
QB904
VCC AO3419 1
2
R902 3
10K TC905 CON3
106
R3 R903
100R 0R
GND
- 18 -
MUTE EN1 EN2 MOTOR CHANNEL DC-DCCTRL1 DC-DCCTRL2
H — — ○ — —
— H — — ○ —
— — H — — ○
L L L × × ×
VCC
+9VIN 106
TC501 L503
DV33
10UH
R504 R507
27K R509
47K 4.7K
GND 2
POWER_OFF
1
3
U502A R511
33R
LM393
GND
R505 R510
1.2k U502B 4.7K
6 LOW_BAT
7
5
R512
LM393 33R
R506 R508
18k 47K
2. Working principle: U502 is an operational amplifier and used as a comparator in circuit. Reverse
input terminal inputs a VCC5V, through two resistors partial pressure, the reference voltage (2.5V) is
achieved; through partial pressure by R504 R505 R506 of +9VIN, two groups of voltage are achieved to
supply for the in-phase input end of operational amplifier; when voltage of in-phase input end is less
than 2.5V, the output pin of operational amplifier outputs a low level to decode chip to perform the
corresponding acts. In this machine, after calculation, we conclude that when input voltage is less than
6.5V, pin 7 of operational amplifier outputs low level and machine screen displays low battery; when
input voltage is less than 6.1V, pin 1 of operational amplifier outputs low level and machines carries out
power-off action.
- 19 -
3.2.7 Audio output circuit
1. Audio output circuit block diagram is shown as in the following figure 3.2.7.1:
HP_L
5
AL LOUT HP_R JK701
186 7 6 16
6
RSOUT-
U201
U301 U701
MT1389E 4558 LM4863 LSOUT- Drive
AR ROUT board
184
2 1 15 3 LSOUT+
JP3
RSOUT+
18
ALIN ARIN
AUDIO_IN Jk301
2. Working principle: signal read out by disc, through audio and video decoding, converse audio
signal in MT1389E built-in DAC circuit to analog audio signal and output left and right channel analog
signals from pin 186, 184 of MT1389E, through Tc301, Tc302, coupled to pin 6, 2 of U301 and then
output from pin 1, 7 of U301 through being filtering and amplifying by the active filter composed of U301
and send to audio output terminal and headphone amplifying output circuit.
(1) Headphone amplifying output circuit
As shown in the figure 3.2.7.2, after volume adjustment of the audio signals outputted from U301
through VR701, input from pin 6, 15 of U701 respectively; audio signals after being amplified output
from pin 5, 16 of U701 to headphone socket for perform converse between headphone and speaker.
SPGND GND
TC703
R70536K
100uF/16V 0R
HPLR709
HP-V1
R706
36K
D701
1N4148
R713 100K
- 20 -
(2) Output mode switch in headphone and speaker
LM4863 drive speaker adopts bridge connection. That drives headphone is single ending working
mode and its switch between them is fulfilled by HP-IN pin. As shown in the figure 3.2.7.2, when
headphone is inserted into a jack, a 4V~VDD voltage is added to HP-IN, which may cut off internal
operational amplifying module Amp2A and Amp2B to make the load connected by bridge invalid. Now IC
lies in single ending working mode and speaker has no sound output. When no headphone is connected
to jack, partial pressure resistance of R711, R707 makes the voltage supplied to pin HP-IN (pin 16) close
to 50mV, drive Amp2A and Amp2B are in working state to make 4863 work in bridge mode and transmit
to speaker through drive board to make speaker has sound output.
VCC VCC
R601
R603 R604 1K
1K 1K STBT
BL_CTL 45
升压板 MT1389E SW601
R605 BL_CTL# SW2
VD601
8050 158 R602
8050 VD602 1K 10K
GND
GND
2. Working principle: when switch is off, pin 45 of MT1389 detects level, pin 158 outputs low level to
make BL_CTL low level, boost board stops working; when switch is disconnected, STBT is high level,
pin 158 of MT1389 outputs high level to make BL_CTL high level, boost board begins to work and lighten
back light board ( when switch is in panel position, screen close is off, screen open is disconnected).
- 21 -
3.2.9 Video coding and LCD-TFT drive circuit
1. Video coding and LCD-TFT drive circuit block diagram is shown as in the following figure 3.2.9.1:
YUV0 IOR VR
YUV1 RGB signal Jp2
IOG VG Jp1
YUV2 amplifying
IOB circuit VB
YUV3 Drive board
YUV4 STV1
U801 STV2
YUV5
U201 T102 CKV
YUV6 U/D
MT1389E YUV7 VCOM VCOM signal amplifying
OEV
T102_RESET L/R -10V
MT1389_CLK OEH +15V
STH1 DC-DC conversion VGH
SDA/SCL STH2 Voltage doubling -10V
rectification circuit VGL
CPH1
Figure 3.2.9.1 Video coding and LCD-TFT drive circuit block diagram
2. Working principle: decode chip outputs digital video signal and directly inputs to T102 for coding
in the means of data in parallel (8 bit), and restore digital signal to 3 base colour signal through internal
DAC circuit and are outputted by pin 62, 65, 68 and sent to a amplifying circuit composed of single triode.
Shown as in the figure 3.2.9.2, converse small current signal of RGB into voltage output means to drive
LCD screen to display.
VCOM signal amplifying circuit: VCOM, after U1 (NJM2414) amplifying, outputs from pin 6, 7 to
display screen and is used as the colourful filtering plate of display screen.
BIAS
+5VA
R843
C843
10K 104
C845 R837
104 R831
430
39K C842 GND VR
GND 106
C841
IOR 1 VD801
2N3904
106
R828 R834 R840
10K C844
150 100 100pF
GND
- 22 -
3. Voltage doubling circuit
Working of display drive circuit requires high voltage, so +5V voltage is voltage doubled, shown as
in the following figure 3.2.9.3:
D1
BAT54S Q1 L5 560R
2 8050 VGH
LX 3
C16
474 1 R11
5.1K
R15
C17 2 10K
3 C22 C23
C19 C20 C21 D5 106 104
474 1VOUT1 BZT52C16V
C18 105 105 105
D2 104
BAT54S
GND
+5V power, through DC-DC conversion conducted by U2, is transmitted to the two groups of voltage
doubling rectification circuit composed of D1-D4 to perform rectification to power sent from pin 1 of U2.
When LX input is negative half circle, about -14V voltage is formed in collector electrode of Q2, -10 VGL
voltage outputted after D6 voltage regulating is provided to VCOM signal amplifying circuit and display
screen. When LX input is positive half circle, the voltage doubling rectification circuit composed by D1,
D2, C19 cannot be up to voltage required by VGH, so 7V DC current achieved after D7 rectification is
overlapped in pin 1 of to voltage regulating circuit Q1, D5 for voltage regulating and then output +15V
DC power to provide for display screen. +15V is outputted by JP1 to display screen through socket JP2
to drive board. In which JP3 on drive board mainly transmit the signal and power required by
loudspeaker and boost board.
4. Boost board (if this PCB board is damaged, it will not be serviced but change it directly): how to judge the
boost board: 1) Make detecting head of oscillograph close to high voltage output line (pay attention not to touch the
line), a sine wave with about 60K will be viewed from oscillograph, which means that boost board has AC output.
The main fault of boost board is that there is no back light or back light is dark.
1 GND - Ground
- 23 -
7 CKV I Gate driver scanning clock
21 GND P Ground
25 AVdd P Power
26 AVss P Ground
- 24 -
3.2.10 Charge circuit and protection circuit
1. Battery: Lithium-ion polymer chargeable battery always follows the method of constant current
firstly and then constant voltage, and then charge in constant voltage state.
2. Lithium battery protection part (this PCB board will not be serviced inside battery components) is
divided into three types: A) Over-voltage protection, that is charge protection; B) Under voltage
protection, that is discharge protection; C) Current protection (short circuit protection included). The
protection delay and delay time of the above 3 items are different, from 1 second to 0.1 second and to
10ms with delay adjustable. Two lithium batteries protection, no matte over voltage protection or under
voltage protection, they are the relationship of “or”. Only one of the two cores has the condition, the
protection is available, which requires that the two cores of a group of battery are balanced on the whole,
or else the whole capacity will be severely damaged (when in over voltage protection, the core of high
voltage causes over voltage protection firstly; when in under voltage protection, the core of low voltage
causes protection firstly).
3. Charge part (charge board is a individual PCB inside main unit): core of charge part is single chip
that adopts A/D conversion with 10-bit. 8-bit single chip (S3F9454)) of PWM (12bits) SAMSUNG
company has the following features:
(1) Single chip is with 10-bit A/D conversion itself, the precision of A/D conversion is 1/1024, the
negative voltage of general NI-MH is 3-6mv (6mv/1500mv=1/250), which can meet the demands greatly.
The precision of lithium battery may be up to 5mv. Considering the test error, it may be up to ±20mv,
that is 4.2V+/-0.02v. The high precision and strong point are obvious.
(2) Use PWM (pulse width modulator) of single chip itself to directly control DC/DC conversion. The
control method is provided by software to achieve different constant current and constant voltage curve
(different charge means may be designed according to clients’requirements), so the whole line is simple,
with low cost, high reliability, high efficiency power conversion and less heat radiation.
(3) May charge NI-MH, NI-CD, LI-ION battery well. How to judge whether it is fully charged: A) max
voltage; B) max temperature increase; C) negative voltage; D) longest charge time. It can be tested
quickly after battery is fully charged and loaded again (within 15 minutes) and stop charging (this point is
very important to NIMH and NICD, which can prevent over charge to damage battery), when battery
voltage is low, use small current to charge to resume the damaged battery.
4. Working principle: when external power adapter is adopted to supply power, power arrives at VIN
pin through socket board and is divided into two ways: A) arrive at decode board (VOUT+) directly
through VD602; B) provided for charge circuit. After voltage regulating, the voltage regulating circuit
composed by V601, U602 provides working voltage for U601. U601 is charge management control
single chip.
- 25 -
Power supply of CPU adopts Tl431 and an NPN triode. There are many elements, but precision is
high, easy to correct and up to 1%, and test work is less. The power supply circuit is composed of U602
and V601, etc.
V605, V604, V603, QB602 compose switch DC/DC circuit; V603 and V604 compose standard push
pull circuit to drive QB602 to make QB602 has good switch waveform to decrease heat radiation.
QB602, L601, TC603 and VD601 compose classic STEP DOWN circuit. When QB602 is on, current
supplies power for battery on one hand and save energy for inductor on the other hand. When is QB1 cut
off, the electric energy in inductor discharges through VD601 to charge battery.
LM358 is classic in-phase amplifying circuit. The reason of adding amplifying circuit is to decrease
resistance test and heat radiation.
The function of QB603 is the external power supply control end. When VIN is low level, QB603 is on,
battery supplies power for load; when VIN is high level, adapter supplies power for load.
QB601 and V602 compose protection circuit. When charge circuit or battery has trouble, MOS_SW
outputs high level, QB601 cuts off, 9V stops supplying power for battery.
AL
186
Loader components Audio amplifying
AR U301
184
FOSO
FMSO 27M
AM5898 TRSO MT1389 E
DMSO YUV0~YUV7
T102_RESET T102
URST#
MT1389_CLK U801
Reset circuit 101 SDA/SCL
93/94
U204
24C02
U203 U202
FLASH SDRAM
- 26 -
2. Working principle:
(1) Power: MT1389 is with two groups of power supply: one group achieves 1.8V voltage after
LM1117MP-1.8(U216) voltage regulating to supply for the logic circuit inside IC; the other group
achieves 3.3V voltage after DC-DC conversion and QB903 voltage regulating. At the same time, FLASH
and SDRAM must also meet the requirements of power.
(2) System clock: clock signal is an important factor of machine’
s working, that whether there is
clock signal or whether it is normal will affect the normal working of the player. This machine adopts
external clock (27M) that inputs to pin 194 of MT1389, clock is produced byT102 and its peripheral
circuit.
(3) Data communication
1) Communication of Mt1389 and SDRAM: the communication of MT1389 and SDRAM is mainly to
temporarily save the large quantities of data after MT1389 decoding to prepare for saving at any time.
Shown as in the figure, DMA0DMA10 is address signal, DQ0DQ15 is data signal, DCLK is synchronous
clock, DCKE is enabled end, CS is chip selection signal, WE is write enabled signal, RAS and CAS are
row and line gating signals.
DMA0—DMA10
DQ0—DQ15
MA11
158 35
#BA1
145 21
DCLK
MT1389 136 38 SDRAM
DCKE
138 37
127 CS# 19
126 RAS# 18
CAS# 17
125
WE# 16
124
123/1 04 DQM0 、 DQM1 15、 39
- 27 -
A0— A19
AA20、 21
AD0 — AD14
MT1389 FLASH
DWR#
57 11
DCE#
68 26
DRD#
70 28
Dv33
D201
R211
In4148
10K
R212
K10 URST#
MT1389E T102
+
Tc207
106
- 28 -
2. Working principle: after power on, DV33 charges TC207 through R211. Voltage on two ends of
capacitor cannot change suddenly, so positive voltage of TC207 increases gradually and its increase
time is related with R211/TC207. When machine is working normally, this voltage is the same with power
voltage on the whole. After this circuit performs reset to decode chip, pin 95 of decode chip outputs a
reset signal to pin 28 of T102 to perform reset to T102. After machine power off, the electric charge
saved in TC207 discharges through D201 to ensure the reliable reset after power on next time.
HP-L
+9VIN
R323 R714
V303 V701
1K MUTE 2SC1815-Y
8550 560R
0
SPGND
D301 R715
1N4148 D302 V702
MUTE_DAC R321
1N4148 2SC1815-Y
MT1389E 560R
1k 1 HP-R
V304
8050
LOUT
R320
R322 AGND V301
10K 2SC1815-Y
560R
AGND
AGND MUTE R319
V302
2SC1815-Y
560R
ROUT
2. Working principle: after power on, +9V arrives at the base electrode of V301, V302, V701,
V702 through CE of V303 to make triode saturated on, audio signal output and headphone output are
short circuited to ground to remove noise that produces when power on. After machine resets and
begins to read disc, pin 151 of Mt1389 outputs a high level to make pin MUTE change from high level to
low level, V301, V302, V701, V702 are cut off because the base electrode is low level , audio signal can
output normally.
- 29 -
Section Servicing Cases
- 30 -
Analysis and troubleshooting: white screen means that boost board working is normal, so it is
preliminarily judged that display drive has trouble, check voltage of 3.3V, 2.5V of U801 and they are both
normal; check input/output signal CVBS0, SDL, SCL, YUV, STH, VCOM0 and find that there is no
VCOM0 signal; after changing U801, the trouble is removed.
[ Example 5 ] Symptom: headphone has no output
Description: loudspeaker and headphone both have no output.
Analysis and troubleshooting: use oscillograph to test whether there is sound signal that outputs to
headphone terminal, and there is no; test whether left and right of TC703, TC704 electrolytic capacitor
have waveform output and there is no; check whether mute circuit is normal, MUTE signal is low level,
normal; check pin 15, 16 of U701 (LM4863 headphone/loudspeaker drive), and there is sound signal
input; after changing U701, trouble is removed.
[ Example 6 ] Symptom: power not on
Description: machine has no response after power on
Analysis and troubleshooting: check whether 9V voltage comes through charge board and it is
normal; check QB902, QB903, and there is 5V, 3.3V conversion, which is normal; check power supply of
each channel and find that L216 has no 1.8V output, so it is doubted that U206 has trouble; after
changing U206, trouble is removed.
[ Example 7 ] Symptom: after installing battery, unplug power adapter, screen will be dark for 1-2S and
then become normal.
Description: use battery to supply power, unplug power adapter, screen will be dark for 1-2S and
then become normal.
Analysis and troubleshooting: firstly compare defective machine with good one, good one will flash
once, but it flashes slightly and shortly, and you will not be aware if you do not observe carefully;
because the brightness and darkness of screen has closely relation to boost board, firstly check boost
board; according to experiences, if the R9 rosin joint on boost board will lead to dark screen, use
multimeter to test and there is no rosin joint, use oscillograph to touch HV, LV signal, and unplug power
adapter at the same time, trouble does not appear again, use man-made simulating method to insert
and unplug quickly and trouble appears again, sine wave on oscillograph disappears for 1-2s, check
BL_9V power supply and find that during trouble period BL_9V voltage will have distortion (it is a little
similar to distortion sine wave, but much more complicated), take down IC and distortion still exists,
which means that it is not IC fault, check element connected with BL_9V, when testing to pin 11 of IC, we
find that during the fault period of 9V voltage, there is distortion waveform, after changing C7, trouble is
removed.
[ Example 8 ] Symptom: not read disc
Description: not read any disc
Analysis and troubleshooting: firstly press down open detecting switch and observe laser head
focus and heat radiation, which are normal; after changing laser head, trouble still exists; load disc and
- 31 -
Read it, when laser head begins to focus, laser head cannot be searched and slides back and forth, use
oscillograph to check focus and trace signal and they are all noisy wave, check the digital signal at front
end of integration, it is still noisy wave; check A, B, C, D, Therefore signal and they are also noisy wave,
check the path between them and there is no problem, each capacitor has no rosin joint and joint
welding; when checking whether flat cable holder XS101 has rosin joint, tin seems to be connected
between pin 8, 9; use multimeter to test and there is actually short circuit, after removing welding tin,
trouble is removed.
[ Example 9 ] Symptom: noise exists when playing
Description: there is noise when playing not any discs, loudspeaker and headphone both have
noise.
Analysis and troubleshooting: firstly make clear that it is loudspeaker trouble or other circuit trouble,
use headphone to listen to Jk701 and check whether it has noise, if it has, it is confirmed that circuit has
trouble, then play 1KHZ standard signal disc, it is easy to test waveform, use oscillograph to check pin 3
and 18 waveform of U701, it should be sine wave, but there is noisy wave to appear consequently, then
check pin 5 and 15 of U701, input pin of left/right channel, and there is still noisy weave to appear, go on
checking to the front stage, check C701, C702 waveform and there is still noisy wave to appear; directly
test pin 1 and 7 of U301, and there is still noisy wave, then check pin 2 and 6 of U301, and waveform is
normal consequently, test power supply of U301, it is also normal; after changing U301, trouble is
removed.
[ Example 10 ] Symptom: black screen
Description: screen of machine has no display after power on
Analysis and troubleshooting: firstly check whether power indicator light emits light to judge whether
power starts up; if indicator light is normal, load disc and check whether disc reading can continue and
whether disc reading is normal; listen loudspeaker and check whether its sound is normal, if it is normal,
the power is judged to be normal preliminarily. Then press screen display detect switch to check whether
screen display has light flashing, if there is no, check 5V of detect signal control line BL_CTL of boost
board and back light voltage 9V of boost board and boost board output and they are all normal; then test
whether high voltage has output. Use detecting head of oscillograph to close up high voltage line of
input display screen and there should be sine wave. Finally change display screen and trouble is
removed.
[ Example 11 ] Symptom: no output
Description: machine screen has no display after power on, cannot read disc.
Analysis and troubleshooting: firstly test 3.3V, 1.8V voltage after DC-DC conversion, voltage output
is normal, then test whether crystal oscillator Y801 has oscillation, and it is normal, and frequency
27.00MHZ is also normal, then test URST# reset voltage 3.0V and it is also normal basically, then test
software data 128M and it also normal, then test U202 DCLK,DCKE and it has response, and only
address line has no response, so we begin to doubt that SDRAM has trouble, change it and there is still
- 32 -
No output, finally we doubt that chip Mt1389 has trouble; after changing MT1389, trouble is removed.
[ Example 12 ] Symptom: noise appears when playing CD
Description: it is normal when playing other discs, but noise appears when playing CD disc
Analysis and troubleshooting: firstly make clear whether other discs have noise, play Dvd disc and
test that there is no noise, then listen to headphone and check whether it has noise to confirm whether it
is loudspeaker trouble or headphone trouble, and they both has noise consequently; now we analyse
that DVD is normal, which means that DAC audio decode and operational amplifier are basically normal,
then process audio decode and data has trouble, which is mainly caused by SDRAM and decode chip,
change SDRAM and it is invalid, then change decode chip MT1389 and trouble is removed.
[ Example 13 ] Symptom: not read CD disc
Description: DVD disc reading is normal, Cd and VCD disc reading are not available
Analysis and troubleshooting: DVD disc reading is normal, so it is judged that focus and trace is
normal basically; firstly we doubt whether detecting has error, test IOA voltage of pin 44 of MT1389, and
the voltage at that time is about3.1 which is obviously incorrect, when reading DVD disc, it is high level,
now VCD disc is being read and it is also high level, triode V102 will not be on at all, of course loader
laser head CD laser pipe will not be lightened; directly change MT1389 and trouble is removed.
[ Example 14 ] Symptom: not read disc
Description: not read any disc
Analysis and troubleshooting: laser head is in middle and cannot return to the most inner circle after
power on, firstly measure T+, T- voltage and it is about 2.5V, which is basically normal, then test feed
inner resistance on loader components, it is about 8 ohm, which is also normal, finally carefully observe
Xs102 flat cable holder and find that there is one flat cable of the 6 loader flat cable that falls off, after
pressing tightly, trouble is removed (this loader always has this trouble, which shows that main axis
electric machine does not rotate sometimes and also pay attention to observe this plug).
[ Example 15 ] Symptom: white screen
Description: TFT screen appears white screen, no normal image output
Analysis and troubleshooting: boost board is normal and it is preliminarily judged that display drive
part has trouble, check each voltage 3.3V, 2.5V of U801 and they are both normal; test oscillation of
Y801 and it is normal; test tricolour and it is normal; test 8-bit data and it is normal, which means that
U801 working is normal, change display screen and trouble still exists. Then we doubt that it is the
display screen flat cable holder that has trouble, observe carefully and find that 3.3V power supply pin of
flat cable holder DV33 3.3V has false welding; after welding again and trouble is removed.
- 33 -
3.3.2 Troubleshooting flow chart
1. Troubleshooting flow chart for “Not read disc”is shown as in the following figure 3.3.2.1:
N Whether
Whether N
pin 12 of AM5898 has
laser head has resets feed signal Check MT1389 and C231
input
Y Y
Check
whether voltage N
on two ends of electric Check electric machine
machine is
equal
Check AM5898
Whether Whether
N N
there is focus action pin 11 of AM5898
Check MT1389 and C233
has focus signal
input
Y Y
Check N
whether voltage of
pin 8, 9 of Am5898 is Check AM5898
normal
Whether N Whether N
main axis electric pin 22 of Am5898 has Check MT1389 and C230
machine rotates signal input
Y Y
Check
whether voltage of N
pin 21, 22 of AM5898 Check AM5898
is normal
- 34 -
A
Check Check
Whether N whether APC circuit N N Check
laser head emits light whether LDO_DV33 power supply circuit
provides voltage for is normal
laser head
Y Y Y
Y
Check N
V104, V103 and socket Change
XS101
Whether N Whether N
rotation speed of disc is there is RF signal Change loader
normal
Y
Y
Whether N
there are ABCDEF Check XS101 and flat cable
signal
- 35 -
2. Troubleshooting flow chart for “Player has no output”is shown as in the following figure 3.3.2.2:
N
Whether reset is normal Check reset capacitor
Whether N
Check T102 and crystal
there is 27M clock
oscillator
Check
Whether N whether pin 3 N Service according to
1.8V power supply is of U206 has 3.3V troubleshooting process
normal power supply for “No 3.3V”
Y Y
Whether
Whether N N
V18 is short
pin 2 of U206 has Change U206
circuited to ground
1.8V output
Y Y
Check
whether power N
supply of decode chip,
Check power supply circuit
FLASH, DRAM
is normal Change SDRAM or MT1389
Y
N
Y Y Y Y
Check N
whether FLASH is Change FLASH
normal
B Y
Y Check N
Weld again whether MT1389 is Change MT1389
rosin joint
- 36 -
B
Check Check
N whether FLASH, N
whether FLASH
has data output Mt1389 has rosin Change FLASH or MT1389
joint
Y Y
Weld again
Check Check
whether SDRAM N whether FLASH, N
data line has Mt1389 has rosin Change FLASH or MT1389
signal joint
Y Y
Weld again
Check N
whether U204 is Change U204
normal
- 37 -
3. Troubleshooting flow chart for “No VCC voltage”is shown as in the following figure 3.3.2.3:
No VCC voltage
Check
whether resistance N
of VCC pin to ground Check load circuit
is normal
Check N
whether R910 has 4V Change AM5898N
voltage
Check
whether the N
end connected to QB902 Check R912
of R912 has 9V
voltage
Check
whether cathode N
of D904 has 5V Change QB902
voltage
Check
N Check whether TC907 has
whether L902
has open circuit electricity leakage
Change
- 38 -
4. Troubleshooting flow chart for “No DV33V voltage”is shown as in the following figure 3.3.2.4:
No DV33V voltage
Check
whether resistance N
to ground of Dv33 is Check load circuit
normal
Check
N
whether R917
Change AM5898N
has 5.5V voltage
Check
whether the N
end connected to QB903 Check R912
of R917 has 9V
voltage
Check
whether cathode N
of D904 has 5V Change QB902
voltage
Check N
whether L903 Check whether TC909
has open circuit has electricity leakage
Change
- 39 -
5. Troubleshooting flow chart for “No VCC, DV33V voltage”is shown as in the following figure
3.3.2.5:
No VCC, DV33
Check
Whether N whether power N
+9VIN is normal adapter of charge board Power adapter troubleshooting
is normal
Y Y
Whether N
+9V Dc socket is Change
normal
Whether N Whether N
pin 1 ofAM5898 SW901 is in OFF Change SW901
is high level position
Y Y
Figure 3.3.2.5 Troubleshooting flow chart for “No VCC, DV33V voltage”
- 40 -
6. Troubleshooting flow chart for “Audio has no output”is shown as in the following figure 3.3.2.6:
Y Y Y Y
Cancel mute
Check N
whether V304 is Change V304
normal
Check N
whether V303 is normal Change V303
Check R714/R715
Check Check
N N Check N
whether pin 6, whether potentiometer whether U301 has
15 of U701 has signal has signal
input signal output
input
Y Y Y
Check N
whether potentiometer Change potentiometer
Whether N Headphone socket is is normal
pin 20 of U701 is 4V not good
Y
Check element from
potentiometer to U701
N Check
Check N whether U301
whether loudspeaker is Change loudspeaker Change MT1389
has signal input
normal
Y Y
Check U301
- 41 -
LCDdisplay trouble
Check
Whether N whether boost N Check N Check N Check N
LCD has back light board has high voltage whether pin 2 of Jp6 whether VD602 is 0.7V whether STBT is high Change SW601
output output is high level level
Y Y Y Y Y
Check
Check Check
Whether N N N 27M crystal N
whether YUV whether 27M clock is
there is image output oscillation and matched Change
has signal input normal capacitor
Y Y Y Y
Check
N
whether decode board
works normally Decode circuit troubleshooting
Change MT1389
Check Check
whether IOG, N whether reset N
IOB, IOR has signal and power supply of Remove one by one
output T102 is normal
Y Y
C1 C2
Change T102
C2
Check
whether VG, N
VR, VB has signal Check RGB amplifying circuit
output
Check
whether drive N Check N
board VR, VG, VB has XS801 and flat cable Change
signal
Y Y
Check N
whether there is rosin Weld again
joint
Check Check
whether VGH, N whether LX N
VGL, +5V voltage on waveform of DC-DC Change U2
drive board is circuit is
normal normal
Y Y
Whether N Check N
picture output is whether VCOM signal Check U1 and its peripheral
normal is normal
Y Y
Check
whether other N
display drive signal Change T102
is normal
N Check N
Whether Check crystal oscillator and
whether 27M clock is
colour is normal externally connected capacitor
normal
Check N
whether T102 is Change
normal
- 43 -
Section Four Servicing Parameters
- 44 -
3. Waveform diagram of main axis drive DMO outputted by decode chip
- 45 -
6. Waveform diagram of TR outputted by decode chip
- 46 -
9. Waveform diagram of OEH of pin 11 of JP2
- 47 -
12. Waveform diagram of pin 29 SW1 of AM5898
- 48 -
15. Waveform diagram of pin 7 VCOMO of JP2
- 49 -
18. Waveform diagram of black light drive voltage
Note: back light drive voltage is high, when testing, detecting head of oscillograph cannot be
contacted with output terminal directly, only close to output terminal and waveform can be tested.
19. URST waveform diagram
- 50 -
Section Five Function Introduction to IC
2. Key Features
RF/Servo/MPEG Integration
Embedded 6ch Audio DAC
Embedded 2ch Audio ADC for Karaoke
High Performance Audio Processor
High Performance Progressive Video Processor
Support Nero-Digital
High Quality 108MHz/12-bit, 4 CH TV Encoder
- 51 -
Versatile video scaling & quality enhancement
OSD & Sub-picture
Built-in clock generator
Built-in high quality TV encoder
Built-in progressive video processor
Audio effect post-processor
Built-in 5.1-ch Audio DAC
Built-in 2-ch Audio ADC for Karaoke
- 52 -
Supports 5/3.3-Volt. FLASH interface
Supports power-down mode
Supports additional serial port
(9)Video Decode
Decodes MPEG1 video and MPEG2 main level, main profile video (720/480 and 720x576)
Decodes MPEG-4 Advanced Simple Profile
Support DivX 3.11/4.x/5.x Home Theater Profile
Support Nero-Digital
Smooth digest view function with I, P and B picture decoding
Baseline, extended-sequential and progressive JPEG image decoding
Support CD-G titles
(10)Video/OSD/SPU/HLI Processor
Arbitrary ratio vertical/horizontal scaling of video, from 0.25X to 256X
65535/256/16/4/2-color bitmap format OSD,
256/16 color RLC format OSD
Automatic scrolling of OSD image
- 53 -
High Definition Compatible Digital (HDCD)
Windows Media Audio (WMA)
Dolby ProLogic II
Concurrent multi-channel and downmix out
IEC 60958/61937 output
PCM / bit stream / mute mode
Custom IEC latency up to 2 frames
Pink noise and white noise generator
Karaoke functions
Microphone echo
Microphone tone control
Vocal mute/vocal assistant
Key shift up to +/- 8 keys
Chorus/Flanger/Harmony/Reverb
Channel equalizer
3D surround processing include virtual surround and speaker separation
(12)TV Encoder
Four 108MHz/12bit DACs
Support NTSC, PAL-BDGHINM, PAL-60
Support 525p, 625p progressive TV format
Automatically turn off unconnected channels
Support PC monitor (VGA)
Support Macrovision 7.1 L1, Macrovision 525P and 625P
CGMS-A/WSS
Closed Caption
(14)Outline
216-pin LQFP package
3.3/1.8-Volt. Dual operating voltages
- 54 -
4. PIN DESCRIPTION
S.N. Pin Name Definition Description
1) Central servo
25 CSO/RFOP Analog output
2) Positive main beam summing output
- 55 -
29 V20 Analog output Reference voltage 2.0V
41 TRO Analog Output Tracking servo output. PDM output of tracking servo compensator.
42 FOO Analog Output Focus servo output. PDM output of focus servo compensator
46 STBY NC Unused
- 56 -
61 A14 INOUT Flash address
80 ALE NC NC
85 UWR# Output NC
86 URD# Output NC
88 UP1_2 NC
89 NOUSE NC NC
- 57 -
93 SCL INOUT I2C clock pin
96 KEY2 NC NC
- 58 -
125 CAS# output DRAM column address strobe, active low
Drive IC control pin (high level when reading disc, low level when in
150 SELECT OUTPUT
external input)
Mute signal output, low level when power on, high level when reading
151 MUTE_DAC OUTPUT
disc
- 59 -
155 MYUV4 OUTPUT YUV signal digital output
160 DACVDDC Power 3.3V power pin for VIDEO DAC circuitry
165 DACVDDC Power 3.3V power pin for VIDEO DAC circuitry
167 DACVDDC Power 3.3V power pin for VIDEO DAC circuitry
- 60 -
187 ALS Output Surround left output
197 PLLVSS Ground Ground pin for data PLL and related analog circuitry.
199 PLLVDD3 Power Power pin for data PLL and related analog circuitry.
200 LPFON Analog Output The negative output of loop filter amplifier
201 LPFIP Analog Input The positive input terminal of loop filter amplifier.
202 LPFIN Analog Input The negative input terminal of loop filter amplifier.
203 LPFOP Analog Output The positive output of loop filter amplifier
214 RFGC Analog output RF AGC loop capacitor connecting for DVD-ROM
- 61 -
3.5.2 function introduction to AM5898N
1. DESCRIPTION
The AM5898N is a 4-channel BTL driver IC for driving the motors and actuators such as used in DVD
player and consists of two DC-DC Step Down Converters. It is pretty fit for portable DVD player application.
Package material is Pb Free for environmental protection.
2. PIN DESCRIPTION
PIN No Pin Name Function PIN No Pin Name Function
1 EN2 Enable pin for buck converter 2 18 VOTK- Tracking driver output (-)
6 PVcc1 Vcc for step down converter 1 23 VINTK Input for tracking driver
8 VOFC+ Focus driver output (+) 25 PGND Ground for analog ground
9 VOFC- Focus driver output (-) 26 PGND1 Ground for step down converter 1
10 Vcc1 Vcc for power block of sled 27 PGND2 Ground for step down converter 2
15 VOSL- Sled driver output (-) 32 EN1 Enable pin for buck converter 1
16 MGND Ground for motor driver 33 MUTE Input for mute control
17 VOTK+ Tracking driver output (+) 34 BIAS Input for reference voltage
- 62 -
HWD4863 audio power amplifier is designed to provide high quality power output. It adopts surface
casing technology with minimum external components. To simplify audio system design, 4863 bridge
connecting speaker amplifying mode and single final end stereo headphone amplifying mode can be realized
by the same chip.
4863 adopts externally controlled low power cut off mode, stereo headphone amplifying mode and
internal thermal cut protection system, also utilizes features of circuit to decrease noise (click sound and
crepitating sound) and distortion degree.
2. PIN DESCRIPTION
Pin Name Type Explanation
9 NC Ground wire
10 NC Ground wire
11 NC Ground wire
12 NC Ground wire
14 BYPASS INPUT
- 63 -
PWM (12bits). Scheme of single chip (S3F9454)) has the following features:
(1) Single chip is with 10-bit A/D conversion with the precision 1/1024, the general negative voltage of
NI-MH is 3-6mv (6mv/1500mv=1/250) which can satisfy your requirements. Lithium battery precision may be
up to 5mv, and may be up to +/-20mv, that is 4.2V+/-0.02v when demodulation error is considered, and high
precision degree is obvious.
(2) Utilize PWM (Pulse width demodulator) of single chip itself to directly control DC/DC conversion.
Control method is provided by software to get different constant current and constant voltage curve (different
charge means may be designed according to client’
s requirements), so the whole line is simple with low cost
and high security, power conversion efficiency is high and heat radiation is less.
(3) May well charge NI-MH, NI-CD, LI-ION battery. The way to judge whether it is fully charged: a. Max
voltage; b. max temperature increase; c. Negative voltage; d. Longest charge time. After battery is fully
charged and put again (within 15 minutes), it can be tested very quickly and stop charging (this is very
important to NIMH and NICD, which can prevent over charging and battery damage), may also use small
current to charge to recover the damaged battery when voltage is very low.
2. PIN DESCRIPTION
4 REST Reset 5
6 I/O Unused 5
7 I/O battery has trouble or in short circuit, output high level control 5
8 I/O Unused 0
9 I/O Unused 0
11 A/D Unused 5
12 A/D Check 5
Pulse modulating output pin (PWM), this pin outputs wav with
- 64 -
14 A/D A/D input pin, which may be used as judge pin of battery category. 5
Battery voltage input pin, which may input through proper resistor
15 A/D 4.5
partial pressure.
Charge battery category input pin, when VDD is pulled up, NIMH,
charged.
20 VDD Power 5
2. FEATURES
Cost Effective Integrated Double ADC OSD + ITU656/01 Decoder +2D Video Decoder +OSD + Scaler +
TCON + DAC
-Integrates 9-bit Double Analog to Digital Converters (ADC)& Phase Locked Loop (PLL)
-Scaler supports 2-D adaptive intra-field de-interlace and non=linear 16:9 aspect ration.
-Requires no external Frame Buffer Memory for deinterlacer
-ITU656/601 Decoder with digital input ports for standard ITU656/601 input data
-Advanced On Screen Display (OSD) function
-Programmable Timing Controller (Tcon) for Car TV applications
-Multi-standard color decoder with 2D adaptive comb filter
-Innovative and flexible design to reduce total system cost
# Double 9-bit Analog to digital Converters (ADC)
# 80MSPS Conversion Date
- 65 -
-built-in Pre-amp, mid-level & ground clamp circuit
-Automatic Clamp Control for CVBS, Y and C
-Programmable Static Gain Control or Automatic Gain Control for CVBS or Y/C
-Max input configuration up to 6xCVBS, 3xS-video
# Digital Video Enhancement
# Chroma Enhancer
-C supports DCTI, Saturation and Hue adjustment.
# Advanced Scaling Engine
# FIR Based Scaler
-Coefficient based sharpness filters
-independent vertical and horizontal scaling ratio
-16:9 Non-linear Aspect ratio
# LCD Interface
-Provides Gamma correction for panel compensation
-Supports image pan functions
-Programmable Timing Controller
-RGB Triple output
# Color Management
-RGB Gamma Correction
# Built-in On Screen Display Engine
-1k-word OSD SRAM memory
-Supports text or bitmap modes
-Supports character blinking and overlay functions
-Fully programmable character mapping
-Supports alpha blending & Zoom-in/Zoom-out function
-Optional fonts can be stored in off-ship serial EEPROM
# Crystal Oscillator Circuit
-Direct interface to a (27.0MHz) Crystal
-Also provide a buffered clock output for external Micro-controller
# Digital Test Pattern Generator
-Programmable standard & special panel burn-in test patterns
-Supports special border frame blocking mode
# Independent Display Phase Lock Loop
-Generates pixel clock output to panel
-Supports free run OSD mode
# Serial Bus Interface
-Supports 2-wire (normal speed) or 4-wire (high speed) mode
- 66 -
# Pulse Width Modulation Outputs
# General Purpose Input Output (GPIO)
# Design For Testability
-Scan chain insertion
-Separated analog & digital test modes
# Power Supple: +2.5V & +3.3V
# Package: 100-pin LQFP
3. PIN DESCRIPTION
symbol Pin# Type Description
Power Supplies
AVDDB 1,7 PWR +3.3V analog power supply for ADC channel 2
AVDDG 9,15 PWR +3.3V analog power supply for ADC channel 1
AVD33D 77 PWR +3.3V Analog Power Supply for DAC I/O pads
- 67 -
IOB 62 AO Channel B current output
SCL 30 DI 2-wire serial bus clock.Power down does not affect SCL
SDA 29 I/O 2-wire serial bus data.Power Down does not affect SDA
Test Pins
ADC Interface
- 68 -
Video-In Interface
- 69 -
Chapter Four Disassembly and Assembly Process
In order to know the structure of DVD player DK1005S easily, visibly and quickly, now each key
link of the disassembly and assembly process of the player is presented in means of pictures to
prevent users from incorrect operating and damaging elements. This player is divided into: the unit,
loader, loader components, control panel components, decode control components, power board
components, AV board components, MIC board components and remote controller. You are suggested
to operate according to illustrations strictly.
The assembly and disassembly process is as follows:
1. Open battery case cover and use electric 2. Take out all screws.
screwdriver to take out screws.
- 70 -
5. Change loader: take out 24P loader flat cable and 6. Remove the red glue on socket and take out feed
pay attention to the clasp on flat cable socket. electric machine flat cable.
7. Take out loader and change new loader. The 8. Take down decode board: pull out the flat cable
assembly process is opposite to disassembly connected charge board and decode board.
process. After assembly is ok, open the protection Use electric screwdriver to unfix screws of
point on laser head. decode board.
9. Remove the red glue from drive board to decode 10. Take out panel flat cable and then you may take
board and pull out flat cable (when removing out decode board.
display screen components, this two flat cable
may not be removed).
- 71 -
11. Take down display screen components: firstly take 12. Panel servicing: you may take down panel directly
down decode board with the method the same as for servicing.
above. The two flat cable of drive board may not be
removed, but should be loosed. Take out PVC plate.
13. Take down display components: open the 14. Take out rotary axis bracket.
display screen.
15. Take out screws in rotary axis. 16. Separate display screen components from machine.
- 72 -
17. Use electric screwdriver to unfix screws at the 18. Take out screws.
powerpart of display screen components.
19. Exert strength on upper display cover backwards 20. The assembly process of display screen
and take out the upper display cover. components is adverse to that of disassembly
process.
21. PVC plate must be added to decode board 22. Insert panel flat cable. Pay attention that the
assembly to prevent short circuit of the decode switch is pointed to the position and forcible
board. assembly is avoided.
- 73 -
23. Fix decode board screws. 24. Well weld flat cable to prevent the misplaced
welding.
25. Well arrange flat cable inside machine to prevent 26. Assemble power switch and cover the bottom
them locking the loader. cover.Pay attention that the bottom cover must
be well assorted with panel.
27. Use electric screwdriver to fix screws. Pay 28. Check whether the machine is fully and properly
attention the length of screws before fixing. assembled with all elements.
- 74 -
29. Open the door of the machine and you may see 30. Power on, test and assembly finishes.
the double-faced adhesive tape. Use hand to press
the flat cable on bottom board to prevent it falling off.
- 75 -
Chapter Cinque
PCB board & Circuit diagram
- 76 -
5.1.2 Surface layer of Battery charge Board
- 77 -
5.1.3 Surface layer of DECODE Board
- 78 -
5.1.4 Bottom layer of DECODE Board
- 79 -
5.1.5 Surface layer of KEY SCAN Board
- 80 -
5.1.6 Bottom layer of KEY SCAN Board
- 81 -
5.1.7 Surface layer of Drive Board
- 82 -
5.1.8 Bottom layer of Drive Board
- 83 -
5.1.9 Battery protection Board
- 84 -
Section Two circuit diagram
5.2.1 DECODE Board 1
JK401
L401 102BED VIDEO-IN
CVBS0 CVBS_OUT 4
3
3
CVBS0 C401
CVBS0 XS701 2
AL L1 GND 1 VD401 20pF 1
AL CVBS1 CVBS BL_CTL 2
AR MMBD4148SE
MUTE_DAC
AR 1.8uH 9VIN 3
VGND 视频信号
MUTE_DAC R4 VCC 4
C3 C2 VCC
75R VCC 5
STBT 47PF 47PF GND 6
2
STBT RSOUT- 7
BL_CTL# RSOUT+ 8
BL_CTL# VGND
VGND LSOUT- 9
LSOUT+ 10
VCC XS10
VCC
+9VIN
+9VIN
GND
GND JK301
A9V
A9V L301 102BED AUDIO-IN
3
ALIN 4
3
L302 102BED
3
VD301 ARIN 2
MMBD4148SE 1
VD302
MMBD4148SE
VCC
2
VCC AGND
2
SP5V VCC HP-L AGND
L701 10UH
AGND
C706 C707 TC701 TC702 R714 V701
R712 104 104 100U/16V 100U/16V 2SC1815-Y
560R
1K
+9VIN
LSOUT+
LSOUT-
R323
SHDN
SPGND GND SPGND V303
TC703 R715 1K
MUTE V702 8550 MUTE
R705 36K
100uF/16V 0R 2SC1815-Y 0
HPL R709 560R
HP-R
R701 R703 R707
DNS
D301
20K DNS SPGND 1K 1N4148 R321 D302
10
9
8
7
6
5
4
3
2
1
JK701 HP
C703
BYPASS GND
+OUB +OUA
-OUA
VDD
GND
HP-IN SHDN
+INA
-INA
VDD
GND
-INB
C705 AGND
105 R322
C704
SPGND
AGND
HP-V1
R706 56K R307 36K
ALIN TC307 R317
36K
RSOUT+
RSOUT-
106
C305 82P
8
TC301
A9V
106
AL R301 R303 R305 6 TC303
R713 100K D701 R309
6.8K 4.7K 4.7K 7 LOUT
1N4148
5 330R
C303 U301B 106
VCC C301 122 4580 R311
R320 V301
102 100K
4
VCC 2SC1815-Y
R601 560R
1K
AGND
R318 56K R308 36K
ARIN TC306
R603 R604 AGND
STBT 106 R319 AGND
1K 1K MUTE V302
C306 82P R312
2SC1815-Y
8
100K
SW601 BL_CTL R302 R304 R306 A9V 560R
TC302
SW2 6.8K 4.7K 4.7K
AR 2 TC304
R602 1 R310 ROUT
VD601 VD602 R605
10K BL_CTL# 106 C302 C304 3 330R
8050 8050 1K 102 122 U301A 106
4580 A9V
4
AGND R315
GND
GND
39K
R316
47K
TC305
106
AGND
5.2.2 DECODE Board 2
VCC +5VA +5VA BIAS
AY0
AY1
AY2
AC0
AC2
R82410K
L805
R825 10K
C863 C864 C865 C866 AVDD33 VDD33 VDD25 10uH C869
C862 + C840
L804 601 VDD25 106
104 106
104 104 104 104 TC1
+
C868
+
100U/16V GND
15
63
66
69
77
26
35
47
56
80
91
27
46
57
78
89
60
75
96
C861
1
7
9
GND C859 C860 BIAS
U801 GND
104 104 106 106
+5VA
AVDDG
AVDDG
AVDD33G
VDD33
VDD33
VDD33
VDD33
VDD25
VDD25
VDD25
VDD25
VDD25
DPLLVC25
AVDDB
AVDDB
AVDD33B
AVDD33R
AVDD33
VD33
VD33
DVDD
AVDD
GND R843 C843
3
C801 C802 81 1 8 YUV0 GND VR
VDT0 C841
331 331 R846 AY0 14 82 2 7 YUV1 C842
CVBS0/AY0 VDT1
56R AY1 13 83 3 6 YUV2 1 VD801 106
+
IOR
CVBS1/AY1 VDT2
GND AY2 12 84 4 5RN806 YUV3
CVBS2/AY2 VDT3
85 1 8 YUV4 2N3904
VDT4
B_MID GND 3 86 2 7 YUV5 106
2
CBMID VDT5
G_MID 11 87 3 6 YUV6 R828 R834 R840 C844
CGMID VDT6
88 4 5 YUV7
VDT7
SDA R847 33 29 560R 150 10K 100 100pF
IICA3/SDA
C804 C805 SCL R848 33 30 90 R812 33R YUV_CLK
SCANB/SCL VCLK
104 104 RN801 33R BIAS
TERAWINS T102 38 1 8 L/R GND
33R RL
GND GNDR801 92 39 2 7 U/D
33R XTALI UD +5VA
Y801 R802 93 40 3 6 STV1
XTALO STV1 R844
27MHZ MT1389_CLK 36 41 4 5RN802 33 STV2 XS801
XCLK2MC STV2 C849
42 1 8 OEV GND
GOE C846 R832 R838 10K 104 1
28 43 2 7 CKV STV1
RSTB GCLK 104 2
R24 1M 31 44 3 6 OEH STV2
CPUINT/SCANST LP/OEH 39K 430 GND 3
45 4 5 VCOMO CKV
3
POL/VCOM/HSO GND VG 4
49 R821 STH1 U/D
STH1/HSO VD802 C848 5
C806 C807 73 50 R822 33R
33 STH2 OEV
VREFIN STH2/DE 1 106 6
+
IOG
22PF 22PF 74 52 R823 200R CPH1 2N3904 VCOMO
VREFOUT CPH1/LLCK1 7
100 53 L806 102BED GND
- 86 -
2
C809 C867 C810 34 32 GND
+ + C811 PWM Q1H R829 R835 R841 C850 - 10
GND GND 99 71 RSET C857 OEH
FIB1 RSET C858 11
104 72 COMP STH2
106 106 104 COMP 27P 27P 150 10K 100 100pF 12
VDD33 17 C856 STH1
FIELD/XbusWR
NC 13
18 R39 GND
NC 104 14
19 62 GND
DPLLGND
IOB CPH1
AVSS33G
AVSS33B
AVSS33R
20 65 AVDD33 820R
AGNDG
AGNDG
AGNDB
AGNDB
GND
AVSSD
IOG
GND NC IOG 16
AVSS
DVSS
68 IOR VR
GND
GND
GND
GND
GND
GND
GND
GND IOR +5VA 17
NC
NC
NC
NC
NC
NC
R845 VG
R849 GND 18
T102_RESET
C851 C855 VB
19
0R R833 R839 10K 104 GND
20
2
8
21
22
23
24
97
98
33
10
16
59
64
67
76
70
95
25
37
48
51
55
58
79
94
61
104
C808 CON20
39K 430 GND
106
3
GND VB
GND
VD803 C853
VDD25 GND
1 2N3904 106
+
IOB
C813 C814 C815 C816 C817 C818 C819 DV33 L802 C852
DV33 33UH VDD33 106
2
104 104 104 104 104 104 104 D801 1N5819(DNS) CVBS0
R830 R836 R842 C854 CVBS0
2 1 MT1389_CLK
150 MT1389_CLK
AVDD33 GND C837 SCL
106 10K 100 100pF SCL
L803 C838 TC2 SDA
C820 C821 C822 C823 C824 C825 C826 C827 C828 U802 FB( 600R ) AVDD33 SDA
YUV0
LM1117MP-1.8 106 100U/16V YUV0
GND YUV1
104 104 104 104 104 104 104 104 104 GND YUV1
YUV2
GND
OUT
YUV2
R.G.B CIRCUIT YUV3
IN
GND YUV6
YUV7
104 104 104 104 104 104 VDD25 R826 R850 YUV7
YUV_CLK
47K 47K YUV_CLK
GND DV33
R852 B_MID G_MID DV33
C835 VCC
200 VCC
106 GND
R827 R851 GND
GND 11K 11K T102_RESET
T102_RESET
R853
150
GND
GND
5.2.3 DECODE Board 3
JK901
+9VIN QB904
+9VIN
VCC AO3419 1
VCC VCC
DV33 2
DV33
A9V A9V R902 3
A9V TC905
J1 U206
L303 33UH 10K 106 CON3
9VIN LM1117MP-1.8 V18
2 V18
GND
GND
GND
OUT
1
IN
TC901
CON2 100uF/16V SELECT R3 R903
SELECT
100R 0R
PGND AGND DV33 FMSO
1
2
3
FMSO
FOSO
FOSO
V18 L216 120 BED DMSO
DMSO
TRSO
TRSO
SELECT R904 VD1 VD901
TC215 R238 F+ 3904 3904
F+ 1K
106 1.8K F-
F-
T+
T+
T-
T-
SL+
SL+ GND
R239 SL-
+9VIN SL-
1K SP+
+9VIN SP+
+9VIN
SP-
IPK2
SP- SBIAS
R905 VCC QB902
10K TC904 R912 AO3419 1 L902 47uH 2 VCC
C902 100uF/16V
0.1
104 C905 C909 TC907
TC3 C904 TC910
C903 100UF/16V 104 C908 D904
R906 104 104 R911 102 MBRS340 104 100uF/16V
SW SPDT
10uF/16V 750
10K
SW901
SGND
R910
PGND SW2 PGND
PGND
- 87 -
PGND EN 0R
+9VIN
AM5898N
1 34 SBIAS R913
R909 EN2 BIAS
CT2 2 33 SELECT 680k
CT2 MUTE
C906 COMP2 3 32 R914 R916
VCC COMP2 EN1
68pF SW2 4 31
27K SW2 CT1
IPK2 5 30 COMP1
IPK2 COMP1 C907 R915
+9VIN 6 29 SW1 1.2K COMP2 3.6K
VD903 CT2 PVCC1 SW1 68pF
PGND 7 28 IPK1 PGND
3906 PVCC2 IPK1 10K
F+ 8 27
+9VIN
VOFC+ PGND2
IPK1
VD902 F- 9 26
VOFC- PGND1 QB903
3904 VCC 10 25
VCC1 PGND R919 AO3419 1 L903 47uH 2
FOSO 11 24 VCC DV33
R907 VINFC VCC2
R908 FMSO 12 23 TRSO PGND 0.1
VINSL VINTK R1
13 22 DMSO
MGND VINSP
SL+ 14 21 SP- R918 C910 D905 C911 TC909
VOSL+ VOSP- 10K MBRS340
43K 6.8K SL- 15 20 SP+ 750 102
VOSL- VOSP+ 104 100uF/16V
16 19
MGND MGND
T- 17 18 T+
PGND VOTK+ VOTK-
35 36 R917
MGND MGND
SW1 PGND
0R
SGND R920
680k
R921 R922
1.2K 2K
PGND R923 COMP1
0R
PLLVDD3 DMSO
L201 10R DMSO
V1P4
R241 MT1389_CLK DV33 FMSO A
0R(DNS) MT1389_CLK DV33 FMSO A
C201 TC202 XI C255 C254 GND TRSO B
GND TRSO B
R230 100K
AL V18 FOSO C
AL V18 FOSO C
20pF
DV33 RFVDD3 106 R240 100K(DNS) AR IR ADIN D
L203 601BED AR
VSDA
IR
IOA
ADIN
E
D
VSDA IOA E
R231 15K
C253 C252 C251
104
R242 GND TC213 TC212 TC211 SDA STBY F
C203 XO SDA STBY F
C258
SCL LIMIT V1P4
104 0R(DNS) 106 474 152 104 SCL LIMIT V1P4
TC201 L204 601BEDRFSVDD3 GND 106 106 STBT MDI1 RFO
C218
102
X201 STBT MDI1 RFO
MT1389_CLK
106 C264 COVER_SW V20
27MHz(DNS) C263 COVER_SW V20
GND 33pF(DNS) ADACVDD3
33pF(DNS)
C259
C204 SELECT LDO2
104 SELECT LDO2
AADVDD3 DV33 MUTE_DAC LDO1
L205 601BED GND GND MUTE_DAC LDO1
BL_CTL# OPO
BL_CTL# OPO
APLLVDD3
L210
ADCVDD3
ACENTER
AADVDD3
R229 33R
RFV18 T102_RESET OP-
PLLVDD3
V18 102BED RFV18
RFVDD3
104
333
ASUBW
T102_RESET OP-
ADVCM
AVDD3
CVBS2
CVBS1
C205
AKIN1
AKIN2
L213 OP+
473
473
OP+
ARS
ALS
104
AR
SC
SY
APLLVDD3 601BED
AL
L206 601BED C209
C229
C219
104
U202
RFV18
104
C257
C256
DMA0 23 2 DQ0
JITFO
JITFN
C206 A0 DQ0
DACVDD3 DMA1 24 4 DQ1
C260
A1 DQ1
XI
104
XO
ADCVDD3 GND C250 C248 C249 TC210 DMA2 25 5 DQ2
L207 601BED A2 DQ2
DMA3 26 7 DQ3
104 104 104 A3 DQ3
106 DMA4 29 8 DQ4
C207 A4 DQ4
216
215
214
213
212
211
210
209
208
207
206
205
204
203
202
201
200
199
198
197
196
195
194
193
192
191
190
189
188
187
186
185
184
183
182
181
180
179
178
177
176
175
174
173
172
171
170
169
168
167
166
165
164
163
JITFO C217 391 JITFN DMA5 30 10 DQ5
104 A5 DQ5
AVDD3 GND DMA6 31 11 DQ6
L208 601BED DMA7 32
A6 DQ6
13 DQ7
A7 DQ7
DMA8 33 42 DQ8
AVDD3
IREF
RFGC
OSP
RFGND
RFRPAC
RFRPDC
ADCVSS
LPFIP
LPFON
IDACEXLP
PLLVSS
JITFN
JITFO
XTALO
RFVDD18
RFGND18
ADACVDD2
ADACVDD1
ALF(CTR)
AR/SDATA1
ARS
ADACVSS2
ADACVSS1
ADVCM
R/Cr/CVBS/SY
B/Cb/SC
G/Y/SY/CVBS
DACVSSB
DACVDDB
CVBS
DACVSSC
R232 750K
OSN
CRTPLP
HRFZC
RFVDD3
ADCVDD3
LPFOP
LPFIN
PLLVDD3
XTALI
ALS/SDATA0
AL/SDATA2
AVCM
ARF(SW)
APLLVSS
APLLCAP
APLLVDD
AADVDD
AKIN1
AKIN2
AADVSS
DACVSSA
DACVDDA
C208 A8 DQ8
L202 V18 DMA9 34 44 DQ9
104 A9 DQ9
601BED DMA10 22 45 DQ10
A10/AP DQ10
DMA11 35 47 DQ11
A11 DQ11
ADACVDD3 GND 1 BA0 20 48 DQ12
L209 C212 105 2
AGND
162 R228 560R BA1 21
BA0/A13 DQ12
50 DQ13
C FS
100uH DVDA FS BA1/A12 DQ13
B C213 105 3 161 VREF 51 DQ14
TC203 C202 DVDB VREF DQ14
A C214 105 4 160 C247 104 DCLK R227 33R SDCLK 38 53 DQ15
100u/16V 104 DVDC DACVDDC CLK DQ15
D C215 105 5 159 SPDIF# GND DCKE R226 33R SDCKE 37
DVDD SPDIF R225 33R CKE
RFO C216 105 6 158 BL_CTL# RN201 SD33
DVDRFIP MC_DATA
V2P8 GND 7 157 MYUV6 CS# 4 5 DCS# 19 1
C210 C DVDRFIN ASDATA3 /CS VCC
8 156 MYUV5 RAS#3 6 DRAS# 18 14
DNS B MA ASDATA2 /RAS VCC
9 155 MYUV4 CAS#2 7 DCAS# 17 27
TC204 C211 MB ASDATA1 /CAS VCC
A 10 154 MYUV2 WE# 1 8 DWE# 16
106 104 MC ASDATA0 /WE
GND D 11 153 MYUV1
MD ALRCK
12 152 MYUV0 33R DQM0 15 3
SA ACLK 33R MUTE_DAC DQML VCCQ
GND 13 151 R224 DQM1 39 9
SB ABCK 33R SELECT DQMH VCCQ
14 MT1389E 150 R223 43
SC GPIO5 VCCQ
SDCLK
DV33 15 149 36 49
SD DVSS 33R COVER_SW NC VCCQ
16 148 R222 40
CDFON GPIO4 NC
C220 C221 C222 C223 C224 17 147 LIMIT 6
CDFOP GPIO3 VSSQ
E 18 Pin Assignment v1.4 146 54 12
104 104 104 104 104 TNI DVDD18 R221 C246 VSS VSSQ
F 19 145 DMA4 DV33 41 46
TPI RA4 10K 10pf VSS VSSQ
MDI1 20 144 DMA5 28 52
MDI1 RA5 VSS VSSQ
R219 560R
GND 21 143 DV33
R220 DNS
DMA6
MDI2 RA6
V18 RFSVDD3 LDO2 22 142 DMA7 GND GND SDRAM 64M GND
LDO2 RA7
LDO1 23 141 DMA8
LDO1 RA8
C225 C226 C227 C228 24 140 DMA9
SVDD3 RA9
RFOP 25 139 DMA11 DV33 102BED SD33
104 104 104 104 CSO/RFOP RA11 L212
RFON 26 138 DCKE DV33
RFLVL/RFON CKE
27 137 TC209
BL_CTL#
C239 C240 C241 C242 C243 C244 C245
- 88 -
SGND DVDD3
SELECT
GND V2P8 28 136 DCLK
V2REFO RCLK 104 104 104 104 104 104 104
V20 29 135 DMA3 106
10K V20 RA3
DMSO R201 DMO V1P4 30 134 DMA2
15K VREFO RA2
FMSO R202 FMO FEO 31 133 DMA1
27K FEO RA1
TRSO R203 TRO TEO 32 132
27K TEO DVDD18
FOSO R204 FOO TEZISLV 33 131 DMA0
TEZISLV RA0
C234 OPO 34 130 DMA10 VD U203 8M_FLASH(TSOP)
C230 C231 C232 C233 OP_OUT RA10
OP- 35 129 BA1 A16 1 48 A17
104 OP_INN BA1 A15 A16
OP+ 36 128 BA0 A15 2 47
153 104 331 331 V1P4 OP_INP BA0 A14 BYTE
DMO 37 127 CS# A14 3 46 GND
DMO RCS# A13 Vss
10K
10K
10K
GND 38 126 A13 4 45 A0
10k
10k
FMO RAS#
FMO RAS# A12 DQ15/A-1
39 125 CAS# A12 5 44 AD7
DNS TROPENPWM CAS# A11 DQ7
V1P4 C235 R205 40 124 WE# A11 6 43 AD14
V20
R214
R213
R215
C236
R217
R216
FG/ADIN1 RD9 A19 DQ5
IOA 44 120 AA21 10 39 AD12
104 GPIO0/VSYNC# DVSS NC DQ12
106 STBT 45 119 DQ10 DWR# 11 38 AD4
GPIO1/HSYNC# RD10 WE DQ4
V18 STBY 46 118 DQ11 12 37 VD
GPIO2 RD11 RESET Vcc
A2 47 117 DQ12 13 36 AD11
IOA2 RD12 NC DQ11
GND 48 116 DQ13 14 35 AD3
DVDD18 RD13 NC DQ3
V1P4
HIGHA6
HIGHA5
HIGHA4
HIGHA3
HIGHA2
HIGHA1
DVDD3
DVDD3
DQM0#
IOWR#
A3 Vss
IOOE#
PRST#
UWR#
GPIO6
GPIO7
IOA18
IOA19
IOA20
IOCS#
IOA21
UP1_2
UP1_3
UP1_4
UP1_5
UP1_6
UP1_7
UP3_0
UP3_1
UP3_4
UP3_5
INT0#
URD#
DVSS
GND A3 23 26 DCE#
IOA1
IOA0
AD0
AD1
AD2
AD3
AD4
AD5
AD6
ALE
AD7
A2 CE
RD7
RD6
RD5
A16
A17
ICE
A2 24 25 A1
IR
33R DWR# R211 D201 A1 A0
PWR# R206
PCE# R207 33R DCE# 10K 1N4148
33R DRD# U201
PRD# R208 A18 DV33 VD
100
101
102
103
104
105
106
107
108
MT1389E
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
T102_RESET 95
96
97
98
99 R212 L211 102BED
A19 LQFP216/SMD URST#
DV33 10K C238 TC208
YUV0
YUV0
POWER_OFF
TC207
MYUV3
KEY2
106
YUV_CLK
URST#
YUV2
RXD
YUV2
SDA
TXD
NO USE
SCL
ICE
INT0#
DQM0
YUV3 GND
YUV3 DQ7 复位电路
DQ6
DQ5
MYUV7
PWR#
YUV4
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
A16
A15
A14
A13
A12
A11
A10
A20
A17
YUV5 330R
A9
A1
A0
YUV5 R210
YUV6
YUV6
YUV7 DV33
YUV7 R209
3
YUV_CLK
YUV_CLK RN803 33R RN804 33R
10K
MMBD4148CA
VSDA
5.2.5 DECODE Board 5
AVCC
R102 R103 DV33
3904/3906 L215
3 C 100K 10K XS501 DV33
R104 TC216 C261 L501 601
IOA U204 R236 R237 10
2 B E1 106 104 680R 680R
AT24C02X4050 9
10K
VCC AVCC Very Important V101 C104 1 8 8
2SK3018 DC/NC VCC
L101 to reduce Noise 3904-S 106 2 7 7
3 D RST_/NC RST/WP
1 1 3 6 SCL 6
WP/RST_ SCL
601 4 5 SDA 5
R105 VSS SDA
2G S 1 2 2 4
3
C102 L502 601 VSDA
TC101 100K EEPROM 3
XS101 C101 104 100uF/16V VD101 VD102 2 VD501
SMT24P0.5mm 106 2SK3018-S 3 3 2SK3018-S 1 MMBD4148SE
C505
24
23 10uH CON10 47pF
L102
22
21 LDO-AV33 L104 DV33
2
20 MDI1 R106 601
19 L103 10uH 4.7R
18
17 C106
16 106
15 E C105
14 LDO2 106
13 V20 VD103
12 2SB1132-S
11 F R101
10 B DV33 DV33
0R R501 U501
9 A
8 RFO JK101 4.7K(DNS) HS0038B
7 IOA BATTY_LED R115 IR R502 1
4 OUT
6 D 1K C501 10R
3 47pF(DNS) 2
5 C VCC GND
2 3
4 T- VD104 COVER_SW VCC
1 C502 103
3 T+ 2SB1132-S LDO1
2 F+ CON4
1 F- 1 2 3 C107 遥控IR输入电路
106 TC502
2SB1132 GND 106
SOT89 LDO-AV33
- 89 -
DV33
C108 C109 C110 C111
225 104 104 225 R107 4.7R R503 100
VCC
+9VIN
L503 DV33
V1P4
BATTY_LED
V1P4
OP+ TC501 10UH
OP+
C113 OP- R504 R507 106
OP-
8
222 ADIN 27K 47K R509
ADIN
C114 F- 4.7K
F- GND
104/DNS F+ 2
F+ VCC
OPO ADIN T- 1 R511 33R POWER_OFF
T-
T+ 3
R108 R109 T+
V20 U502A
680K 0R V20 R513
OP- IOA R514 LM393
IOA 470R
OP+ MDI1
8 4
MDI1 470R
SP+ LOW_BAT GND
SP+ LOW_BAT R505 R510
SP- POWER_OFF
SP- POWER_OFF 1.2k 4.7K
R110 R113 C115 R114 SL+ IR U502B
SL+ IR 6
150K 150K 222 680K SL- VSDA
SL- VSDA 7 R512 33R LOW_BAT
LDO1 COVER_SW
R111 LDO1 COVER_SW 5
V1P4 LDO2 LED501 SCL
LDO2 SCL
G
4
RFO
1R XS102 RFO VCC 18k 47K
SP- 6 A VCC
A GND
SP+ 5 B GND
B DV33
SL+ 4 C C503 C504 DV33
C +9VIN
SL- 3 D 104 104 +9VIN
D
2 E
E
LIMIT 1 F GND
F
LIMIT
PH-6 LIMIT
OPO
OPO
5.2.6 Battery protection Board
B+
RED
B+
Note: Voltage detecting
BT1
RB3 RB4 BATTERY
1K 1K
2
FB1
125V/3A
1 8 CB4
1
SENS VCC
104
2 7 RB5 B
TP1 DO VC
1K B
3 6 WHITE
TP2 CO ICT
4 5
TP3 VMS8232G
VSS
4
3 TP4 UB1
TP5
BT2
JKB1502 2 S8232G BATTERY
BA-CON 1
RB2 4.7M
TP6
RB1 1K
- 90 -
104 104
CB1 CB5
QB1A QB1B
VOUT- UPA1870 UPA1870 B- B-
BLACK
1
D7 R9
GND MBRS140 270K C13
C32 106 1
5VA 47pF
VCC
2
SW
JP2 BLGND VGL R18
3 100K
GND VGH 3
1 5VA 4 FB
STV1 C33 C34 STV1
2 5
STV2 STV2 4
3 104 104 6 SHDN
CKV CKV C14 R20
4 R13 7
U/D U/D 5 106 10K
GND
5 0 8 COMP
OEV GND OEV
6 9
VCOMO VCOM R8 R10
7 10
GND VCOM 3.3K 56K
8 MOD 11
L/R L/R C9 U2
2
9 12 C10
GND MOD 106 G5105
10 R14 13 104
OEH OEH C11
11 14
STH2 STH2 103
12 (DNS) 15
STH1 STH1
13 16
GND CPH1
14 17
CPH1 CPH1 GND
15 18
GND 601BED CPH1
16 GND L1 19
VR 5VA D1
17 20 Q1
VG C2 C15 GND BAT54S L5 560R
18 C1 21 8050
VB VR 2 VGH
19 104 104 22
GND 106 VG LX 3
20 23
L2 VB C16
24
CON20 +5V GND VDD2 474 1 R11
25
601BED GND 5.1K
26 R15
C3 C4 10K
JP6 For Innolux 7" C17 2
BLGND L3 104 106 3 C22 C23
- 91 -
1 601BED 104
BLCTL C19 C20 C21 D5 106
2
BL9V 474 1 VOUT1 BZT52C16V
3
C18 105 105 105
CON3 GND D2 104
BAT54S
JP3
BLGND 1 GND
C6 C7
BLCTL 2 R6
BL+9V 3 106 104 D3
+5V 4 18K BAT54S Q2
L6 100R
+5V 5 C24 1 8550 VGL
8
GND 6 U1 474
SR- 7 NJM3414AM R16 3
SR+ 8 C8 2 R12
V+
+I/P B
-I/P B
R19
SL+ 10 106 C26 C29 82K
C25 1 C27 106 C30
XS10 105 104
474 105
+I/P A
GND
O/P A
-I/P A
2 R1 L7
10K VGL BAT54S
CON2 C5 601BED R7 GND
JP5 106 R2
10K 15K
SR+ VCOMO R5
1
SR-
2 R3 R4 18K 10K
CON2 GND VCOM
15K
GND
VCOM CIRCUIT
5.2.8 Battery charge Board
QB602
VIN QB601 IR7416 QB603
VIN T10 T11 L601 T12
2
AO3419 AO3419 VOUT+
33uH
A K
2
R602 R609 VD602
1K R605 TC602 1K1206 C605 C604 MBRS340
100uF/16V AL R613
TC601 TC603 TC604
A K
10K 10R R614
R601 100uF/25V V601 V603 VD601 330uF/16V(AL) 104 224 330uF/16V(AL)
1
R610 10K
10K 8050 R606 8050 MBRS340
10R
2
4.7K C602
102
1
Ref K
3
A R607
VIN
C601 8050 MOS_SW V604
104 V602 8550
10K
U602
TL431 R608 CVDD
1
R603 R604 T9
4.7K V605
8050
10K_1% 10K_1%
T47uF/10V CVDD
R611 470R1206
TC606 R612
3K
1 TVS(DNS)
7 14 R622
MOS_SW TEMP
CON4 T4 P2.2 P0.5/AD5
R615
10K
220K 6 15
T5 P2.1 P0.4/AD4
5 16 R623
TEMP T7 VOUT-
P2.0 P0.3/AD3
U603
3K
4 17 1 8
/RE/P1.2 P0.2/AD2
2 7
R624 R626
XOUT 3 18 470R 3 6 R637 R638
XOUT/P1.1 P0.1/AD1 470R R642
C606 4 5 100R1206 100R1206
JK601 R625 0.27R
104 XIN 2 19 47K R633 R634 R635 R636
VIN XIN/P1.0 P0.0/AD0
2 LM358M 0.27R 0.27R 0.27R 0.27R R630 R632 C615
T8
1 T6 1 20 * 104
TC605 VSS VDD
22K 1%
CON2 100uF/25V
S3C9454 C609 C610 CVDD R627 22K CVDD
GND V606
104 T47uF/10V
C611 C612 104 8050
104 C613 C614
R628 104
T47uF/10V
1.5K_1%
2.2K
SW602
XOUT
XIN R639
100K
X601
C607
8MHz C608
10pF
10pF
5.2.9 Boost Board
R11
0R
L1
15uH CDRH4D28(DNS)
1K T1
R12 R10 2 7
100K
IC1 C12 105/16V
R2 R3 1 20 R9 C13 DNS
1K 1K ABRT AGND 300K
2 19 C14
R13 IL ISFB 10PF/3KV
100K 3 18
BOS VLFB
4 17
DBRT FT
R1 5 16 4 6
EN COMP R8
10K CN2
CN1 6 15 100K HV
VDD VDD 1
BL_9V LV
1 2
BL_CTL 7 14
2 BATT BATT
BL_GND C4 C8 CON2
3
105/16V 8 13 105/16V
OUTL OUTR
CON3
C5 9 12
PGND PGND C6 CR3
CR2
103 10 11 103
BTL BTR
- 93 -
IN4148 IN4148
MP1026
CR1
R4 C3 R5 R6 R7
C17 C1 C2 3.3K 270R DNS C7 C10 C11
106/16V 106/16V 105 (3.1mA) C9 C15 C16
5.1V 105/10V 100K 105/10V 103 105/10V103 332 681
Chapter six BOM List
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
DL370D(RU)SUKVER[1389E]
SWITCH
0460571 002P502 T1
POWERTRANSFORMER
DL370D(RU)SUKVER[1389E]
DL370D(RU)SUKVER[1389E]
- 94-
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
TOP COVER OF
3072235 DL370D(RU) DEEP GREY
BATTERYCASE
BOTTOM COVER OF
3070167 BATTEMETAL OXIDE FILM DL371 DEEP GREY
RESISTORCASE
R601,R603,R604,R605,R607,R614,R6
0090304 PRECISION SMD RESISTOR 1/16W 10K±1% 0603
17~R620,R622
C601,C605,C606,C609,C611,C612,C6
0310207 SMD CAPACITOR 50V104 ±20% 0603
14,C615
- 95 -
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
SMDFIELD EFFECT
0790095 AO3409 SOT-23 QB601,QB603
TRANSISTOR
DL370D(RU)SUKVER[1389E]
- 96 -
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
DL370D(RU)SUKVER[1389E]
R101,R109,R903,R849,R910,R917,R9
0090001 SMD RESISTOR 1/16W 0O±5% 0603
23,R1,R812
R206~R208,R222~R227,R511,R512,R
0090005 SMD RESISTOR 1/16W 33O±5% 0603
801,R802,R821,R822,R847,R848
R239,R601,R603,R604,R605,R707,R7
0090014 SMD RESISTOR 1/16W 1K±5% 0603
08,R712,R904,R115
R303,R304,R305,R306,R509,R510,R8
0090019 SMD RESISTOR 1/16W 4.7K±5% 0603
03
- 97 -
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
R103,R104,R209,R211~R217,R221,R6
02,R824,R825,R834,R835,R836,R843,
0090023 SMD RESISTOR 1/16W 10K±5% 0603
R844,R845,R902,R905,R906,R915,R5,
R322,R323
R102,R105,R230,R311,R312,R711,R7
0090034 SMD RESISTOR 1/16W 100K±5% 0603
13
TC1,TC101,TC203,TC701~TC704,TC9
0260568 CD CD11E 16V100U±20%6.3×5 2.5
01,TC904,TC907,TC909,TC910
C101,C104~C107,C808,C810,C835,C8
39,C840,C841,C842,C847,C848,C852,
C853,C861,C867,C868,C869,TC201,T
0310389 SMD CAPACITOR 10V 106 +80%-20% Y5V 0805
C202,TC204~TC213,TC215,TC216,TC
301~TC307,TC501,TC502,TC905,TC3
~TC5
- 98 -
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
C102,C109,C110,C201~C209,C211,C2
18~C228,C234,C236~C245,C247~C25
1,C260,C261,C503,C504,C706,C707,C
0310594 SMD CAPACITOR 25V 104 ±10% 0603 804,C805,C809,C811,C813~C827,C82
9~C834,C843,C845,C846,C849,C851,
C855,C856,C859,C860,C862~C866,C9
02~C905,C909,C911
- 99 -
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
D201,D701,D1,D2,D301,D302
0700007 SMD DIODE 1N4148
①
D201,D701,D1,D2,D301,D302
0700001 SMD DIODE LS4148
①
D201,D701,D1,D2,D301,D302
0700002 SMD DIODE LL4148
①
SMDFIELD EFFECT
0790095 AO3409 SOT-23 QB902~QB904
TRANSISTOR
- 100 -
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
DL370D(RU)SUKVER[1389E]
C1,C4,C5,C6,C8,C9,C14,C31,C32
0310389 SMD CAPACITOR 10V 106 +80%-20% Y5V 0805
⑤
C1,C4,C5,C6,C8,C9,C14,C31,C32
0310701 SMD CAPACITOR 10V 106±20% Y5V 0805
⑤
- 101 -
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
C10,C15,C18,C2,C23,C3,C30,C33,C34
0310594 SMD CAPACITOR 25V 104 ±10% 0603
,C7
1940194 CABLE SOCKET 26P 0.5mm SMD,SUBMIT MEET WITH CLASP JP1
DL370D(RU)SUKVER[1389E]
- 102 -
MATERIAL
MATERIAL NAME SPECIFICATIONS LOCATION
CODE
DL370D(RU)SUKVER[1389E]
DL370D(RU)SUKVER[1389E]
PROGRAM FLASH
- 103 -