Professional Documents
Culture Documents
DANGER
INTRODUCTION
Thank you for purchasing The Generator Exerciser by All Professional Industries.
Every effort was expended to make sure that the information and instructions in this
manual were both accurate and current at the time the manual was written. However, the
manufacturer reserves the right to change, alter or otherwise improve this product(s) at
any time without prior notice.
EQUIPMENT DESCRIPTION
The Generator Exerciser assembly is used to automatically exercise and/or turn on/off the
generator remotely. Once installation is complete, The Generator Exerciser will operate
automatically without any need for user intervention or routine maintenance.
1. For 12VDC installation, make sure your 12VDC is fused at 10A max, 5A min. and is constant
power.
2. Install (+) Positive to terminal L+. Install (-) Negative to terminal M.
3. Run the generator’s two wires from the two wire start to terminal Q1 and Q2.
4. When powered-up, set the date, day and time, then follow the procedure below.
TIMER OPERATION