Professional Documents
Culture Documents
TOOLS
BikeMaster ®
CONTROL
SEATS &
GRAPHICS
BODY
BikeMaster®
PIT BIKE
BikeMaster® BikeMaster® WOOD HANDLE MULTI TOOL
WOOD HANDLE WOOD HANDLE MULTI • Medium plus size with wood insets and
a polished stainless steel body
MINI MULTI TOOL TOOL SMALL L.E.D. LIGHT • Additional utility of outside access to ENGINE
• Making sure that you always have at • Medium size, wood inset and blades and tools without opening the
least a blade, a file, a flat head and beautifully polished stainless steel body pliers
cross head screwdriver • All the usual tools, which include spring • With the benefit of smooth grips when
• Along with small, spring-loaded needle loaded pliers, a 3” blade, a straight open in the pliers/wire cutter mode FUEL & AIR
nose pliers a saw, a can and bottle and cross head screwdriver, a can • Complete with heavier duty tools and
openers, and an awl opener, a file, a saw, ruler and awls blades than standard medium body
• Folds up into a compact package of • Also hides a powerful miniature L.E.D. knives DRIVE
about 2-1/2” long light • Features a can opener, straight and
15-1651 $9.95 15-1652 $14.95 cross head screwdrivers, and a 4 mm
square driver, saw, file, and ruler
combo, bottle opener, sharp and BRAKE
smooth awls, and a 3” blade
15-1653 $14.95
SUSPENSION
ELECTRICAL
CHEMICAL
SECURITY &
TIEDOWNS
BikeMaster® BikeMaster®
WOOD HANDLE MULTI BRIGHT ALUMINUM/
TRAILER &
TOOL LARGE L.E.D. LIGHT RUBBER HANDLE BikeMaster® STANDS
• Our largest bodied tool with wood insets MULTI TOOL RED ALUMINUM/RUBBER
and polished stainless steel construction • Technical style with polished aluminum
• Additional utility of outside access to blades body with high grip rubber inserts HANDLE MULTI TOOL TOOLS
and tools without opening the pliers • Outside access to blades and tools • Super high tech-style with red anodized
• With the benefit of smooth grips when without opening the pliers aluminum body with black inserts
open in the pliers/wire cutter mode • High quality stainless steel tools and • Additional utility of outside access to blades SHOP
• Complete with heavier duty tools and blades in a medium plus body and tools without opening the pliers SUPPLIES
blades than standard medium body • Complete with heavier duty tools and • High quality stainless steel tools and
knives blades than standard medium body blades, in a medium body
• Features a can opener, straight and knives • Complete with 2-1/2” blade plus a DISPLAY
cross head screwdrivers and a 4 mm • Features a can opener, straight and 2-1/2” serrated saw/knife blade & PROMO
square driver, saw, file, and ruler cross head screwdrivers and a 4 mm • Features can opener, straight and cross
combo, bottle opener, sharp and square driver, saw, file and ruler head screwdrivers, 4mm square driver, CROSS
smooth awls, and a 3” blade combo, bottle opener, sharp and file and ruler combo, bottle opener, REFERENCE
• Hides a powerful miniature L.E.D. light smooth awls, and a 3” blade sharp and smooth awls
15-1654 $19.95 15-1656 $14.95 15-1658 $14.95
927
EXHAUST
TIRES &
WHEELS
SUSPENSION
ELECTRICAL
WINDZONE BikeMaster® MULTI FUNCTION
GREAT ESCAPE™ POCKET TOOL (10 FUNCTIONS)
CHEMICAL
TOOL KIT • Aluminum body for lighter weight
• Lightweight and compact, the only motorcycle tool kit in the • Anodized for corrosion protection and great looks
world small enough to wear on your belt, yet big enough to • Compact size packs multi function utility
repair 95% of all roadside mechanical emergencies • Equipped with 2, 2.5, 3, 4, 5, 6 mm hex wrenches
SECURITY & • 2 specially-designed multi-tools, metric and SAE hex bits, as • Plus an 8 mm hex tip, cross head and flat head screwdrivers
TIEDOWNS well as Torx and numerous slotted and phillips screw bits • All this and it fits in the palm of your hand, a must for your
• Kit includes: Ultima-Tool™ Multi-Tool, Essenti-Tool™ Multi-Tool bike’s tool kit
and various bits 15-1590 $14.95
TRAILER & • All stainless steel
STANDS
Ultima-Tool™ Multi-Tool Essenti-Tool™ Multi-Tool
• Adjustable wrench • Needle nose pliers
• Needle nose pliers • Small knife blade
TOOLS (spring loaded) • Flat screwdriver
• Large knife blade • File
• Wood saw • Wire-cutter/stripper
SHOP • Flat screwdriver • Hole punch
SUPPLIES • File • 10mm wrench
• Wire cutter/stripper • Scissors
• Bit driver with adapter MOTION PRO® “MP” TOOL
DISPLAY Various Bits Included: • Can be used to remove 8, 10, 12 & 14mm bolts, #2 & #3
& PROMO • Slotted screwdrivers: 1/8”, 5/32”, 3/16”, 1/4” phillips screws, small and medium straight-slot screws and
• Phillips screwdrivers: #0, #1, #2, #3 5 and 6mm allen bolts
• Metric hex keys: 2mm, 2.5mm, 3mm, 4mm, 5mm, • Includes a 1/4” and 3/8” socket driver
CROSS • 10 and 12mm 1/4”-drive sockets included
5.5mm, 6mm
REFERENCE • Tool can be enhanced by adding your own 1/4” or 3/8”
• SAE hex keys: 1/16”, 3/32”, 1/8”, 5/32”, 3/16”,
7/32”, 1/4” drive socket attachments
928 • Torx: T8, T9, T10, T15, T20, T25, T27, T30, T40 • Includes convenient carrying case
49-0877 $34.95 15-8161 $59.95
OFFROAD • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & STREET CATALOGS
OFFROAD
TOOLS
TOOL KITS & MAGNET TOOLS
EXHAUST
TIRES &
WHEELS
CruzTOOLS® CONTROL
OUTBACK’R™ M14
• 4 hex heads (3, 4, 5 and 6mm)
CruzTOOLS® DMX™ • 2 screw drivers SEATS &
FANNY PACK TOOL KIT • Socket driver with 8, 10 and 12mm sockets GRAPHICS
• The ultimate offroad tool kit • 13 and 14mm open end wrenches
• Complementing the long list of tools and other items is a stout • 3 spoke wrenches
and functional pouch with 5040 denier nylon shell, top grade • Weighs 9 oz. and is 3.5” long BODY
hardware and zippers, plenty of storage, including a mesh cash 15-4013 $19.95
and document pocket and key clip
15-4010 $99.95
PIT BIKE
ENGINE
DRIVE
CruzTOOLS®
MINISET™ COMPACT CruzTOOLS® DMX2™ TOOL KIT
• The ultimate fender-mounted tool kit
METRIC KIT • Similar to the DMX1 except it contains a socket set for the BRAKE
• Precision 48-tooth ratchet with PackWrench instead of the mini T-driver
extension and 8-piece socket set • Includes fender mount and rain fly
• Contains the most common metric sizes, 15-4016 $114.95
including hex and phillips bits SUSPENSION
• Tools are top grade polished chrome
and stored in a durable molded box
15-4009 $44.95
ELECTRICAL
CruzTOOLS®
ECONO KIT® M2
• Major upgrade in quality and CHEMICAL
content over O.E.M. kits
• Contains the exclusive Power
Drive combination wrenches,
SECURITY &
plus a host of other essentials TIEDOWNS
15-4011 $39.95
TRAILER &
STANDS
TOOLS
EXHAUST
TIRES &
WHEELS 15-1529
MOTION PRO®
CONTROL BALL-END ALLEN SET 15-1528
• Made of chrome-vanadium tool steel
• Sizes available 1.5, 2, 2.5, 3, 4, 5, 6,
8 and 10mm
SEATS &
GRAPHICS • Ball end allows for better access to
allen-head bolts (up to 250 working
BikeMaster®
KASTAR angle)
• Convenient holder included ADJUSTABLE MICROMETER
BODY LATCH-ON 5-PIECE 15-8185 $18.95 TORQUE WRENCHES
12-POINT, RATCHETING • 3/8” Sq. Dr. marked range (5-80 Ft.Lbs)
BOX WRENCH SET • 1/2” Sq. Dr. marked range (10-150 Ft.Lbs)
PIT BIKE • Built-in non-slip retaining ring in each • Reversible ratchet head
ratchet wheel to create the ultimate in • Micrometer-type sleeve allows accurate
speed and safety when turning fasteners pre-set torque values to be set
• A nut can be tightened or loosened up Description P/N Retail
ENGINE
to 5 times faster than with a conventional 3/8” Sq. Dr. 15-1528 $60.95
wrench or ratcheting wrench 1/2” Sq. Dr. 15-1529 65.95
• Metric Sizes: 7mm-8mm, 9mm-10mm,
FUEL & AIR 11mm-12mm, 13mm-14mm,
15mm-17mm
• Standard Sizes: 1/4”-5/16”, 3/8” 7/16”,
DRIVE
1/2”-9/16”, 5/8”-3/4”, 11/16”-7/8” BikeMaster®
• Exceeds GSA torque specification 3/8” MULTI-JOINT SHAFT
GGG-W-001405 for torque capacity
Description P/N Retail
DRIVE RATCHET WRENCH 15-1536
• Not a swivel head, but an articulating
BRAKE Metric 15-1244 $79.95 shaft with either a speed wrench handle
Standard 15-1247 79.95 or ratcheting handle means that it can
fit and function where others just will not
SUSPENSION • If you can get the socket on the nut, you
can get it undone
• The ergonomically designed comfort
handle rotates and drives the shaft
ELECTRICAL • Or pull out telescoping handle with 15-1535
multi-joint shaft drive and you’ve got
even more torque
• Made from forged chrome
CHEMICAL vanadium steel
• This is a professional quality tool
• Multi-layer chrome for years of service
SECURITY & and good looks BikeMaster®
TIEDOWNS • Works just like a standard ratchet WOBBLE EXTENSION BARS
wrench if you need it to • Allows sockets to be driven at up to 15˚
15-1562 $45.95 off vertical
TRAILER & BikeMaster® • Chrome steel hardened, heated and
STANDS polished
3-PIECE 230MM Description P/N Retail
BRUSH SET 1/4” Sq. Dr. Bar Set
• Contents: 50, 100, 150, and 250mm long
TOOLS • Contents: brass, nylon and stainless Bar Set 15-1535 $18.95
steel brushes
• Plastic handles 3/8” Sq. Dr. Bar Set
• Contents: 45, 75, 150, 250 mm
SHOP 15-1538 $9.95 Bar Set 15-1536 $25.95
SUPPLIES
DISPLAY
HELIX® RADIATOR
& PROMO FIN STRAIGHTENER
• This 6-in-1 tool clears and straightens fins on
radiators and oil coolers that have been damaged
CROSS or clogged with debris
REFERENCE • Just select the right fin spacing and restore the fins
to their original shape and spacing
• Very handy to remove dried mud and dead bugs
930 from all types of bikes, ATVs and UTVs
53-0374 $12.86
OFFROAD • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & STREET CATALOGS
OFFROAD
TOOLS
TOOLS
EXHAUST
TIRES &
MSR® MOTION PRO® WHEELS
AXLE WRENCHES T-STEM NUT WRENCH
• Include sizes for front and rear axle • Allows for loosening of the T-stem nut
• 6-point design for firm grip on axle nuts without removing the handlebars CONTROL
• Compact designs for easy fanny pack • The opposite spanner allows for
carrying adjustment of the T-stem bearing MOTION PRO®
Description P/N Retail without moving the triple clamps
Application P/N Retail
TAPPET ADJUSTMENT SEATS &
17mm x 24mm 34-2105 $19.95 Honda 15-8232 $39.95 WRENCH SET GRAPHICS
17mm x 27mm 34-2106 19.95 Kawasaki 15-8233 39.95 • Chrome-plated heat-treated steel
19mm x 27mm 34-2107 19.95 Suzuki 15-8234 39.95 • Fits any screw type tappet adjuster
22mm x 27mm 34-2108 19.95 Yamaha 15-8035 39.95 with 8, 9 or 10mm adjusting nut BODY
32mm x 22mm 34-2109 19.95 combined with either a 3 or 4mm
square or straight screw driver type
adjusting screws
• Interchangeable parts allows for PIT BIKE
9 different combinations
15-0460 $43.95
ENGINE
BikeMaster®
1/2” DRIVE HEAVY-DUTY MOTION PRO® SECURITY &
STUD EXTRACTOR Ti PROLIGHT WRENCHES™ TIEDOWNS
• Capacity 6 - 19mm • Less than 1/4 the weight of a standard
15-1532 $24.95 steel wrench
• Made of tool quality titanium alloy TRAILER &
• Titanium alloy will never rust or corrode STANDS
• Patent pending design to optimize
strength and performance
• Laser etched markings for easy TOOLS
identification
BikeMaster® • Ergonomic handle
6, 8, 10, 12MM STUD • Recommended for trail and road tool SHOP
pack use
REMOVAL SOCKETS • Not recommended for everyday
SUPPLIES
• Grip a larger area with rollers to shop use
confidently remove the studs BikeMaster® • Set of 4 (P/N 15-8466) contains 8, 10, DISPLAY
• The socket slips over the stud protecting 4-PIECE MINI HOOK 12 and 14mm & PROMO
it, and allows you to use the force Description P/N Retail
necessary AND PICK SET Set of 4 15-8466 $99.95
• No risk of open ended wrenches • Designed to ease the removal of CROSS
O-rings, split pins, seals, bushings and 8mm 15-8461 16.95
slipping off 10mm 15-8462 21.95 REFERENCE
loose parts
• Rollers are bidirectional, they can just • Contents: Awl, Clevis - pin remover, ‘L’ 12mm 15-8463 30.95
as easily and safely install the studs too and ‘V’ hooks 13mm 15-8464 35.95 931
15-1648 $39.95 15-1534 $10.95 14mm 15-8465 39.95
EXHAUST
TIRES &
WHEELS PARK TOOL USA
STEERING TUBE
CONTROL BEARING INSTALLER
• Offers a safe approach to lower
bearing installation PARK TOOL USA
SEATS & • Utilizes specially designed, aluminum inserts STEERING RACE PRESS
GRAPHICS to quickly and accurately install • Easily and accurately presses steering head tube races,
nearly any lower bearing including eliminating damaged or misaligned bearing races
1800 Gold Wings • Helps prevent dented and chipped frames
BODY • Reduce the risk of damage to the bike • Permits quick tool installation and release after races are seated
15-1254 $75.95 • Now fits Gold Wing
15-1255 $200.95
PIT BIKE
TOOLS
SHOP
SUPPLIES MOTION PRO®
FORK ALIGN TOOL
• Quick and easy to use method of aligning
DISPLAY
& PROMO
PARK TOOL USA your front forks to insure they are parallel
• Knurled adjustment screws for easy setup
FRAME/HANDLEBAR STRAIGHTENER • Improve handling characteristics of motorcycle
• Open hook design enables it to straighten handlebars
CROSS • Reduce seal and bushing wear
and subframes
REFERENCE • Vinyl coating on the hook and on the fulcrum pad protects • Will work on 27mm-62mm fork legs and fork tubes
• Will work on forks that are 140mm to 220mm on center
painted surfaces
• Patent pending
932 • Hook has over 8” of adjustments
15-8412 $34.95
15-1256 $82.95
OFFROAD • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & STREET CATALOGS
OFFROAD
TOOLS
T-HANDLE TOOLS
EXHAUST
TIRES &
WHEELS
CONTROL
MSR® REMOVABLE
MSR® SOCKET T-HANDLE MSR® T-HANDLE SEATS &
T-HANDLE TOOL SET • Perfect fanny pack tool 3-WAY SOCKET GRAPHICS
• Chrome vanadium • Features removable socket • Compact sizing for easy fit in many
• Includes 6, 8, 10, 12, • Comes with 8, 10, 12, and 13mm sockets fanny packs
13, 14 and 17mm sizes • Can be used with other socket sizes you • Solidly built from chrome vanadium BODY
• Includes #3 phillips have in your tool box tool steel for corrosion resistance and
• Heavy-duty vinyl carrying case 34-0478 $20.95 durability
77-2704 $46.95 • 8, 10 and 12mm sockets are welded
in place on tri-socket PIT BIKE
34-2102 $18.95
ENGINE
CHEMICAL
15-1585 BikeMaster®
1/4” DRIVE T-HANDLE SET SECURITY &
• Made of heat treated vanadium steel TIEDOWNS
BikeMaster® 1/4” • Comes with 6mm, 8mm,10mm,12mm,
14mm and #2 phillips socket
T-HANDLE WRENCH WITH • Fits in fanny pack TRAILER &
SOCKETS AND SWIVEL 15-1546 $12.95 STANDS
• Heat treated chrome vanadium steel
• Chrome plated for durability and
long life
• Black chrome coating for a great look BikeMaster® TOOLS
and easy find in the tool box 1/4” COMPACT SLIDING
• T-handle has ball bearing detent socket AND FOLDING T-HANDLE
holders on each leg SHOP
• Heat treated chrome vanadium steel SUPPLIES
• Also has a 1/4” drive swivel for access
• Chrome plated for durability and
to tight spots
• Metric version comes with sizes 8, 10, long life
• Sliding and folding T-handle make for a DISPLAY
12, 13 and 14mm black 6-point BikeMaster® 3/8” & PROMO
sockets compact piece of kit
• Standard version comes with 5/16”, • Comes with 8, 10, 12, 13 and 14mm DRIVE T-HANDLE SET
3/8”, 7/16”, 1/2” and 9/16” black short sockets • Made of heat treated vanadium steel CROSS
sockets • T-handle has ball bearing detent socket • Comes with 8mm, 10mm, 12mm, REFERENCE
Description P/N Retail holders on each leg 13mm, 14mm, 17mm and #2 phillips
Metric 15-1585 $28.95 • 6-point sockets for a sure fit socket 933
Standard 15-1586 28.95 15-1587 $21.95 15-1547 $15.95
EXHAUST
TIRES &
WHEELS
CONTROL
MOTION PRO®
DUAL DRIVE BALL-END
SEATS &
GRAPHICS
MOTION PRO® ALLEN T-HANDLES
T-HANDLE TOOL RACK • Use T-handle hex to tighten/loosen
• Designed to hold the T-handle socket MOTION PRO® fasteners and ball-end hex on shaft for
wrenches and screwdrivers quick installation/removal of fasteners
BODY
• Hooks onto most tool boxes or trays T-HANDLE SCREWDRIVERS • Ball-end allows for better access to
15-8114 $22.95 • Same design features as the
Motion Pro® T-handle sockets but with hard-to-reach allen-head bolts (up to
phillips bits 25˚ working angle)
PIT BIKE • Compact 6-3/4” shaft lengths for tight
• Set of 3 phillips #1, 2, and 3
15-8146 $16.95 spaces and easy transport
• Chrome-vanadium tool steel shaft and
ENGINE T-Handle
• Durable hard nickel-pewter finish
• Lifetime manufacturer’s replacement
warranty
FUEL & AIR Description P/N Retail
Set 15-8383 $46.95
MOTION PRO® 4mm 15-8374 13.95
DRIVE WALL BRACKET FOR 5mm 15-8375 13.95
T-HANDLE RACK 6mm 15-8376 13.95
• For mounting T-handle rack (P/N 8mm 15-8377 14.95
15-8114) to the side of a toolbox,
MOTION PRO®
BRAKE
wall, post or any flat surface DRIVE T-HANDLES
• Features a quick release pin for • Allows optional ways to use any 1/4”
removing and attaching the T-handle or 3/8” drive attachments such as
SUSPENSION rack sockets, hex drives, crows foot or swivels
• Includes built in bottle opener • Made from chrome-vanadium tool steel
• Made from heavy-duty 12-gauge with carbon steel T-handles
zinc plated steel • Lifetime manufacturer’s replacement
ELECTRICAL 15-8435 $24.95 warranty
Description P/N Retail
1/4” Drive (8-1/2” long) 15-8158 $9.95
CHEMICAL 3/8” Drive (10-1/2” long) 15-8159 12.95
MOTION PRO®
TRI-DRIVE MINI T-HANDLE
SECURITY & • Use T-handle drive to tighten/loosen
TIEDOWNS fasteners and shaft drive for quick
installation/removal of fasteners
• Use with 1/4” drive sockets, hex drives,
TRAILER &
STANDS
MOTION PRO® crow’s foot, swivels, etc.
T-HANDLE RATCHET • 1/4” drive has a compact 6” drive
• Compact design allows for use in shaft length
tight confines • Compact size for use in tight spaces
TOOLS
• Comfortable grip and is easy to carry
• Patented design • Includes 8, 10, 12 and 13mm sockets
MOTION PRO® RACER • Chrome-vanadium tool steel shaft and
SHOP Description P/N Retail
SUPPLIES 1/4” 15-8231 $28.95 MINI T-HANDLE 6MM T-Handle
3/8” 15-8226 28.95 • Compact size for easy transport • Durable nickel-pewter finish
• European fasteners • Lifetime manufacturer’s replacement
DISPLAY • O.E.M. hose clamps warranty
& PROMO 15-8401 $11.95 15-8389 $18.95
CROSS
REFERENCE
934
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
CruzTOOLS® CruzTOOLS® GRAPHICS
POWER DRIVE™ 3-WAY PACKWRENCH MOTION PRO®
1/4” SLIDING T-DRIVER • Compact T-style wrench to fit
• Standard 1/4” drive tip
into a fanny pack or under RACER T-HANDLE DEEP BODY
the seat SOCKET SET
• At about 7”, it can be easily carried on • 3 sizes: 8mm, 10mm, 12mm
your bike • Includes 8, 10, 12, and 14mm sockets
• Heat treated sockets with a and #2 and #3 phillips screwdrivers
• Sliding “T” feature polished chrome finish PIT BIKE
• Polished chrome finish • Lifetime manufacturer’s replacement
15-4007 $14.95
15-4012 $16.95 warranty for sockets
15-8145 $57.95
ENGINE
DRIVE
MOTION PRO®
MINI-PRO MOTION PRO® BRAKE
5-PIECE T-HANDLE SET T-HANDLE SOCKET MOTION PRO®
• 5-piece set includes 8, 10, 12, 13 and • Nickel-pewter finished chrome- T-HANDLE DEEP SOCKETS
14mm sizes vanadium, deep-well • Made from chrome-vanadium tool steel SUSPENSION
• Compact size for easy access and • 6-point sockets with carbon steel handles • Deep 6-point sockets with carbon steel
transport • The slim outside diameter of the sockets T-handles
• 6-3/4” shaft lenfth allow access to tight areas • Lifetime manufacturer’s replacement
• Chrome-vanadium tool steel shaft • Lifetime manufacturer’s warranty warranty ELECTRICAL
• Durable nickel pewter finish Description P/N Retail Description P/N Retail
• Includes a vinyl storage pouch 8mm socket 15-8093 $11.95 8mm 15-8128 $11.95
• Manufacturer’s lifetime replacement 10mm socket 15-8094 11.95 10mm 15-8129 11.95 CHEMICAL
warranty 12mm socket 15-8095 13.95 12mm 15-8130 11.95
15-8340 $48.95 13mm socket 15-8096 13.95 13mm 15-8317 11.99
14mm socket 15-8097 13.95 Set of 3 (8, 10, 12mm) 15-8131 34.95 SECURITY &
17mm socket 15-8098 16.95 Set of 3 (8, 10, 13mm) 15-8320 34.95 TIEDOWNS
19mm socket 15-8099 16.95
Set of seven 15-8113 73.95
TRAILER &
STANDS
PIT BIKE
15-1583 15-1574
ENGINE
15-1575
TRAILER &
STANDS
BikeMaster®
BikeMaster® 9-PIECE L-BALL END HEX WRENCH SET
TOOLS
S-BALL END HEX WRENCH SET AND HOLDER
AND HOLDER • Made from precision drawn chrome vanadium tool steel
SHOP • Made from precision drawn chrome vanadium tool steel • Extremely accurate drawing makes for a perfect fit
SUPPLIES • Extremely accurate drawing makes for a perfect fit • Extra long with ball end allows angled reach and access to
• Short with ball end allows angled reach in tight places obscured bolts
• Bead-blasted surface for a better grip • Bead-blasted surface for a better grip
DISPLAY • Corrosion-resistant coating • Corrosion-resistant coating
& PROMO • Includes a durable holder • Includes a durable holder
• Metric comes with sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm • Metric comes with sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm
CROSS • Standard comes with sizes 1/16, 5/64, 3/32, 1/8, 5/32, • Standard comes with sizes 1/16, 5/64, 3/32, 1/8, 5/32,
REFERENCE 3/16, 5/16 and 3/8 inch 3/16, 5/16 and 3/8 inch
Description P/N Retail Description P/N Retail
Metric 15-1580 $17.95 Metric 15-1579 $24.95
936 Standard 15-1582 17.95 Standard 15-1581 24.95
EXHAUST
TIRES &
WHEELS
CONTROL
BikeMaster®
8-N-1 SOCKET WRENCH
• Forged from durable, drop forged SEATS &
BikeMaster® BikeMaster® chrome vanadium steel GRAPHICS
• Turn socket to tip to gain access to tight
10-PIECE 3/8” DRIVE 13-PIECE 1/4” DRIVE SET spaces
METRIC FLARE CROW FOOT OF METRIC SOCKETS ON • Turn socket to side to get extra leverage BODY
WRENCH SET ON RAIL SOCKET RAIL • Replaces 8 wrenches or 8 sockets
• Contents: 10, 11, 12, 13, 14, 15, 16, • Contents: 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, • 12-point style means you can index the
17, 18, 19mm 8.0, 9.0, 10.0, 11.0, 12.0, 13.0 and wrench in tight spaces
• For use in confined areas 14.0mm PIT BIKE
• Fits 10, 12, 13, 14,15, 17, 19 and
• Carbon steel hardened and heated with • 6-point sockets 21mm sizes
black finish • Manufactured from chrome vanadium steel 15-1548 $25.95
15-1530 $40.95 • Chrome-plated and fully polished ENGINE
15-1539 $14.95
DRIVE
15-8362
MOTION PRO®
22MM SHORT, 3/8”DRIVE BRAKE
MOTION PRO® 6-POINT SOCKET
• Super short (23mm high) to
15-8363 WING-NUT SOCKET SET reduce weight SUSPENSION
• Set includes large and small 3/8” drive • 6 pt. chrome vanadium socket
wing nut sockets • 3/8” drive
• Designed to remove over-tightened or • Satin chrome finish
15-8364 stuck wing nuts • Designed for use with T-6 combo lever ELECTRICAL
• Ideal for use on brake cables and rods 3/8” drive adapters
• Can be used with air tools • Fits Yamaha: YZ125 98-04,
15-8224 $35.95
MOTION PRO® YZ250 98-04, YZ250F 02-03,
YZ400F 98-99, YZ426F 00-02, CHEMICAL
DUAL L-HANDLE DRIVERS WR426F 01-02, YZ450 03-04
• Impact-resistant, ergonomic molded 15-8387 $6.95
handle reduces hand fatigue SECURITY &
• Use handle drive to tighten/loosen TIEDOWNS
fasteners and shaft drive for quick
installation/removal of fasteners
• Mini’s are compact 7-5/8” shaft length TRAILER &
for tight access and easy transport STANDS
• 1-piece chrome-vanadium tool steel shaft
• Use with drive sockets, hex drives,
crow’s foot, swivels, etc. TOOLS
• Durable, hard nickel-pewter finish
• Lifetime manufacturer’s warranty
Description P/N Retail MOTION PRO® SHOP
Standard 3/8” drive 250mm 15-8361 $16.99 6MM, 1/4” DRIVE SUPPLIES
Standard 1/4” drive 250mm 15-8363 15.99
Mini 3/8” drive 195mm 15-8362 16.99 6-POINT SOCKET
Mini 1/4” drive 195mm 15-8364 15.99 • European fasteners
• O.E.M. hose clamps
MOTION PRO® DISPLAY
15-0408 $3.95 HOLD-A-NUT & PROMO
• Magnetic insert eliminates dropped nuts
and bolts
• Lifetime manufacturer’s warranty CROSS
REFERENCE
Description P/N Retail
1/4” drive 4-16mm 15-8088 $20.70
3/8” drive 9-19mm 15-8090 20.70 937
EXHAUST 15-1594
TIRES &
WHEELS BikeMaster®
MOTION PRO® 14-IN-1 SCREWDRIVER 15-1595
• Great multi purpose tool
CONTROL ADJUSTABLE TORQUE • Better than the usual multi tip
WRENCH ADAPTER screwdrivers BikeMaster®
• Torque any fastener with a combination • 12 number of tips on 12 number
SEATS & wrench or allen wrench of shafts ADJUSTABLE WRENCHES
GRAPHICS • Will work with 6mm (1/4”) through • Driver shaft is a 4mm socket wrench • Unique sliding adjustment feature
19mm (3/4”) • Has one meter tape measure in head • Just place the tool on the bolt or nut,
combination wrenches 15-1559 $13.95 thumb the slider and it adjusts to the
• Will work with 6mm through 8mm allen perfect fit
BODY • No wheel to turn
wrenches
• Heat-treated steel with a black oxide finish • Easier to position and reposition than
• 3/8” square drive is rated for a conventional thumb wheels
maximum torque of 90 ft-lbs • Carbon steel construction, brass screw
PIT BIKE
15-8380 $60.95 MOTION PRO® head
TORQUE WRENCH • Metric and standard dimension etched
ADAPTER 12MM/14MM on tool
ENGINE • Used to properly torque 2-stroke • Extra convenient closed end wrench
cylinder base nuts on the end
• Comfortable rubber grip
BikeMaster® EXTRA • Extends the reach of 3/8” drive torque
• Black chrome corrosion-resistant coating
wrench by 3”
FUEL & AIR REACH ADJUSTMENT • Made from chrome-vanadium tool steel Description P/N Retail
SCREWDRIVER with a satin chrome finish 6” 15-1594 $19.95
• Extra long for use with multi bank • Multiply torque wrench readings by 8” 15-1595 24.95
carbs, or any other deep reach needed chart supplied with tool for proper 10” 15-1596 29.95
DRIVE
• Gear drive, precision made, hardened torque specifications
tool steel bit 15-8134 $15.95
15-1578 $27.95
BRAKE
SUSPENSION MSR®
BikeMaster® 6-IN-1 SCREWDRIVER
• Fits conveniently into fanny packs MSR®
ELECTRICAL 3/8” DRIVE • 2 phillips and 2 flat blade SILENCER PLUG
IMPACT DRIVER screwdriver sizes
• 6mm socket wrench (for carb jets)
• Protects silencer packing during washing
• Removable 3/8” head • Turning the handle expands the plug
• Can be used with standard or deep • 8mm socket wrench (for side panel Application P/N Retail
CHEMICAL 3/8” drive sockets or extensions and shroud bolts) 2-Stroke 34-0276 $8.50
• 2 flat and 2 phillips bits included 34-2100 $9.95 4-Stroke 34-0599 10.95
15-0625 $18.95
SECURITY &
TIEDOWNS 15-1616 15-1615
TRAILER &
STANDS
BikeMaster®
TOOLS RUBBER MUFFLER PLUGS
• Protects the exhaust system from water
during pressure washing, keeps humidity
from entering pipe as it cools down or
SHOP
prevents condensation inside the pipe FMF
SUPPLIES
during storage WASHPLUG
• Formulated to be stiff enough to not fall • Now available from FMF - the Washplug
DISPLAY out but soft enough to insert into the pipe PROGRIP® P.O.P. display box with 20 plugs
& PROMO without damage SILENCER PLUG • Each plug includes “Remove before
• Small fits most 2-stroke applications • Silencer plugs are made of soft rubber flight” flag
• Large fits most 4-stroke applications • Display contains 6 2-stroke and • Sold as a kit. Throw it away and order
CROSS • Display includes 6 large and 6 small plugs 6 4-stroke plugs another when it’s empty
REFERENCE Desription P/N Retail Application P/N Retail • Will fit most 2-stroke and 4-stroke bikes
Small 15-1615 $3.95 2-Stroke 17-7851 $4.99 • Retail priced individually
938 Large 15-1616 4.95 4-Stroke 17-7852 5.99 27-8050 $4.49
Display 12-pack 15-1686 49.95 Display 17-7824
EXHAUST
TIRES &
WHEELS
MOTION PRO® PLASTIC
MOTION PRO® BikeMaster® TUBING & HOSE SHEARS CONTROL
CLUTCH HUB HOLDER SNAP RING PLIERS • Scissor action, for fast cutting of
thin-wall and small diameter vinyl or
• Holds clutch hub while nut is removed SET (4 JAWS) nitrile type tubing
• Also has tangs for holding fly wheel • Reduce the frustration and get • Teflon-coated tool steel blades can be SEATS &
sprockets 8 tools in 1 GRAPHICS
resharpened
• Adjustment 1” to 5” • The correct tool for the job, avoid lost 06-2013 $36.95
15-0465 $31.95 and damaged C-Clips
• 4 Jaws to fit every angle correctly BODY
• Will work on internal and external
snap rings
• Durable hardened steel tips
• Spring assisted pliers PIT BIKE
• Comfortable molded plastic handles
15-1588 $19.95 IMPERIAL OPEN BARREL
MOTION PRO® TERMINAL TOOL ENGINE
• A 5-station crimper for most open
MASTER CYLINDER barrel terminals found on motorcycles
SNAP-RING PLIERS 15-1303 $23.99 FUEL & AIR
• Allows removal of internal snap rings
used in hydraulic master cylinders
• Can be used to remove and replace
small to medium internal snap rings up DRIVE
to 50mm deep, including those used for
transmission gear locating, bearing
retention and oil seal retention
• Applicable to some fork seal retaining MOTION PRO® BRAKE
rings TELESCOPIC SAG SCALE
• Replaces 07914-SA50001 and KASTAR 2-PC. • Easy to read scale with recording marker
AKS-316-2010
15-8279 $29.95 RETAINING RING • Direct reading scale SUSPENSION
PLIERS SET • Adjustable for MX/Dual Sport Bikes
• Convert between internal and external • Easy to set up
with a quick move of a switch • Will accommodate most hollow
rear axles ELECTRICAL
• Each pliers includes a tip kit containing
5 pairs of durable alloy, color-coded, • Attaches directly to rear seat bolt on all
interchangeable tips and allen wrench, mx/offroad applications
all stored in a handy pouch • Anodized aluminum body with laser
engraved markings CHEMICAL
• Packed in modular foam
Tips SAE Metric • No tools required to install/remove
Straight .023”, .036”, 6mm, .9mm, • Includes carrying case
MOTION PRO® .047”, .070” 1.2mm, 1.8mm 15-8406 $119.95 SECURITY &
TIEDOWNS
SNAP RING PLIERS Bent 90° .036”, .047” .9mm, 1.2mm Optional Fender Clamp
15-8440 $28.95
• Economical pliers that easily open snap 15-1229 $71.95
rings or clips from the inside and outside TRAILER &
• Includes 3 extra sets of tips, 1 additional STANDS
straight tip and 2 offset or angled tips
15-8186 $15.95
MOTION PRO® TOOLS
FOLDING SAG SCALE
• 6061-T6 aluminum construction
• Rigid folding design fits in most
SHOP
tool boxes SUPPLIES
• Stainless steel hinges
• Direct reading scale (no subtracting
required) with white background and DISPLAY
black lettering
RACE TECH • Adjustable zero set point with extended
& PROMO
SAG MASTER™ range
• Allows you to measure MSR® SAG SCALE • Will work on mini and full size bikes CROSS
“Race Sag” without subtraction • Simplifies shock preload measuring • Inch and metric scale combination REFERENCE
• Useful in determining proper spring rates • Easy-to-read millimeter scale on one • Installs in rear axle
and monitoring linkage and seal drag side and inches on the other • For shock and fork sag 939
77-2625 $9.99 34-0277 $29.95 15-8336 $35.95
EXHAUST
SUSPENSION
ELECTRICAL
Mounting Tab
(For Vise Clamping) MOTION PRO®
CHEMICAL SWINGARM BEARING TOOL
Safetygate Hinge Pin • Designed for installation and removal of
the swingarm bearings on late model
SECURITY & Japanese motorcycles
TIEDOWNS • Using the correct size insert and the
puller, the mechanic can draw the
Shock Spring “Shutter” bearing either in or out of the swingarm
TRAILER & without damaging it with a hammer
STANDS 15-8213 $76.95
EXHAUST
TIRES &
WHEELS
DRIVE
BRAKE
SUSPENSION
MOTION PRO® MOTION PRO®
DAMPING ROD BLEED TOOL FORK OIL LEVEL GAUGE
• Tool allows for effortless retrieval of damping rod after spring • Easy and accurate fork oil level adjustment and measurement
installation on conventional and inverted forks ELECTRICAL
• Perfect for working on Kayaba, Showa and WP inverted forks • Adjustable ring will measure oil levels for 0-300mm in 0.5mm
• Packaging includes tube for convenient tool storage increments
15-8337 $40.99 • Syringe capacity of 60ml CHEMICAL
15-8121 $29.95
SECURITY &
TIEDOWNS
TRAILER &
STANDS
07-0661 TOOLS
SHOP
PROGRESSIVE® SUSPENSION PROGRESSIVE® SUSPENSION SUPPLIES
FLUID LEVEL ADJUSTER MINI GAUGE PUMP
• An easy way to fill or adjust fluid volumes if the filler hole is small • Perfect for air forks and air shocks
• This versatile tool works with forks or transmissions • Flexible hose DISPLAY
77-0920 $15.95 • Check valve prevents pressure drop when pump is removed & PROMO
Description P/N Retail
0-30 psi gauge 07-0661 $51.95 CROSS
0-60 psi gauge 07-0660 51.95 REFERENCE
0-100 psi gauge 07-0662 51.95
941
EXHAUST
15-1027
TOOLS
MOTION PRO®
MOTION PRO® MOTION PRO® KTM HEIM JOINT TOOL
SHOP • Removes and replaces KTM Heim joints
SUPPLIES COMPRESSION BOLT FORK COMPRESSION or aftermarket equivalents
• Aligns Heim joint for easy installation
REMOVAL TOOL VALVE REMOVAL TOOL • Built-in stop correctly centers Heim joint
DISPLAY • For removing and installing the • For removing the compression valve in swingarm
& PROMO compression valve assembly from from fork cartridge • Aligns and installs Heim joint seals
the fork cap • 19mm drive hex • Handle includes retention O-ring to
• 17mm hex head • 36mm octagon hold Heim joint adapters and Heim
CROSS • Made from billet 6061 T-6 aluminum • Manufactured out of billet 6061 joint bearing in place
REFERENCE • Orange anodized finish with laser T-6 aluminum • Ergonomic handle for a comfortable fit
engraving Application P/N Retail • Blue anodized, laser engraved billet
942 •15-8436
Made in USA Yam YZ125/250/250F/ 6061-T6 construction
$32.95 450F 2005 15-8373 $22.99 15-8434 $54.95
EXHAUST
TRAILER &
STANDS
MOTION PRO®
RACE TECH FORK SEAL BULLETS MOTION PRO®
FORK CAP WRENCH • Protects the fork seal and wiper on
inverted forks from damage by the
FORK SEAL DRIVERS TOOLS
• For 46/50mm Showa twin chamber • Easy installation on either conventional
bushing groove during installation or inverted forks
forks, fits recent model Honda CR125’s • Eliminates the need to wrap the fork • Manufactured from plated carbon steel SHOP
and Suzuki RM125 & 250’s tube with tape • Featuring split design and weighted SUPPLIES
77-2702 $44.99 • Set of 7 includes 36, 41, 43, 45, 46,
47, 48mm body
• Available separately • Sold individually
Description P/N Retail DISPLAY
Description P/N Retail & PROMO
Set 15-8272 $67.95 35/36mm 15-8221 $63.95
36mm Red Bullet 15-8273 9.95 39mm 15-8170 64.95
PRE-LOAD 41mm Blue Bullet 15-8274 9.95 41mm 15-8123 66.95 CROSS
43mm Green Bullet 15-8275 9.95 43mm 15-8124 62.95
SPANNER WRENCH 45mm Yellow Bullet 15-8276 9.95 45mm 15-8125 66.95
REFERENCE
• 3/8” drive designed to easily adjust 46mm Black Bullet 15-8277 9.95 46/47mm 15-8138 66.95
shock pre-load rings 47mm White Bullet 15-8278 9.95 48mm 15-8331 59.99 943
07-0636 $8.95 48mm Orange Bullet 15-8332 9.99 49/50mm 15-8171 69.95
SEE CATALOG UPDATES AT
TOOLS
OFFROAD
TOOLS
MOTION PRO ® CARBURETOR TOOLS
PIT BIKE
BRAKE
SUSPENSION
MOTION PRO®
T-6 FLOAT BOWL WRENCH
• Designed to remove 17mm float bowl MOTION PRO®
ELECTRICAL MOTION PRO® drain plugs FCR CARB TOOL
MINI-T CARB TOOL • Made from lightweight 6061 T-6 • Contains longer bits for reaching into
• Designed to fit into fanny pack to take aluminum recessed cavities to adjust Keihin FCR
CHEMICAL care of those “on-the-trail” jet changes • Compact design to carry in your tool pack carburetors
• Includes 1 piece each of #2 phillips bit, • 12-point hex and low profile design for • Ideal for trail riders and garage
#1 straight slot bit and 6mm hex socket tight access mechanics alike
SECURITY & 15-8136 $17.95 15-8366 $18.95 15-8181 $14.95
TIEDOWNS
TRAILER &
STANDS
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
DRIVE
BRAKE
MOTION PRO®
GAS TANK QUICK SUSPENSION
TOOLS
SHOP
SUPPLIES
BikeMaster® IMPERIAL
HOSE REMOVAL PLIERS HOSE CLAMP TOOL DISPLAY
• Taking off tight fitting fuel, vacuum and • Pinches off fuel lines when changing filters & PROMO
BikeMaster® coolant hoses can be a real challenge... • Prevents fuel loss and spillage
Worse if they are old 15-1301 $12.99
2-PC HEAVY-DUTY STEEL • Simply insert between the hose and the CROSS
HOSE REMOVER fitting (or grip the hose) and apply REFERENCE
• Made of heat treated vanadium steel gentle pressure
• Heavy-duty • Hose slides off with no damage 945
15-1545 $20.95 15-1644 $19.95
EXHAUST
TIRES &
WHEELS
CONTROL
KASTAR BikeMaster®
SEATS &
KASTAR HELI-COIL KIT
GRAPHICS RETRACTABLE TEST LEADS 12MM SPARK PLUG • Save money and maybe a critical part!
• For testing electrical circuits RETHREADER • Can save the day when a thread strips
• Retractable test leads pull out and stay • Used to clean-up dirty or damaged or is pulled out
BODY at desired length spark plug threads • Kit comes complete with 2 high speed
• Rewind test leads when not in use • 5/8” hexagon with O-ring female steel drill bits for M8 and M6 holes
• Insulated alligator clips 3/8” square drive • 2 HSS taps (with guides) in the most
• 18-gauge copper wire 15-1226 $17.95 popular M8 x 1.25 and M6 x 10 sizes
PIT BIKE 15-1224 $14.95 • Features Helical coil inserter tools, Helical
coil tab removers, ratchet T-wrench to
use with the taps and Helical tools
ENGINE • 3 different lengths of M6 and
2 different lengths M8 Helical Coils
• All in a convenient plastic carrying case
15-1640 $159.95
FUEL & AIR
DRIVE
KASTAR BikeMaster®
BRAKE
SPARK PLUG RAMP ALUMINUM TIMING
GAUGE AND DISPLAY DEGREE WHEEL
• Handy Ramp Gauge hangs on a • Made from durable, thick, 6061-T6
SUSPENSION keychain aircraft aluminum sheet
• Gauge covers all spark plug gapping • 7” diameter with large, highly visible
requirements from .020 to .100 markings
ELECTRICAL • Metric gapping scale shown on
• Extremely accurate marking makes MOTION PRO®
reverse side getting timing right the first time easy DEGREE WHEEL
• Available in an attractive counter • Lightweight and coated with durable • Manufactured from .052” thick
display finish aluminum with a 6-3/4”diameter and
CHEMICAL • Retail priced per gauge • Can be used for crankshaft positioning, a 6mm center hole
• 50 gauges per display ignition, and camshaft timing • Used for checking ignition and
15-1211 $2.21 ea. 15-1639 $18.95 camshaft timing
SECURITY & 15-8092 $19.95
TIEDOWNS
TRAILER &
STANDS THE GRUNGE BRUSH
• 3-sided bristles allow you to clean all 4
sides of your chain and the long
TOOLS KASTAR EZ GRIP bristle side lets you clean other parts of
PLUG GAP GAUGE your bike like sprockets and wheels
• Pocket clip feature keeps ramp gauge at • Regular component cleaning prevents
SHOP fingertips premature wear and tear on
SUPPLIES • Ramp gauge covers all spark plug chain and sprockets which assures
gapping requirements from .020 to .080 smooth operation of the drive train
• Metric gapping scale shown on • Bristle blocks are adjustable to
DISPLAY reverse side
& PROMO • Specifically designed recess to adjust accommodate all sizes of chain
ground electrodes • Brush available individually or with a
15-1210 $5.95 mild degreaser
CROSS Description P/N Retail
REFERENCE The Grunge Brush 31-7121 $13.95
The Grunge Brush with Cleaner 31-7120 17.95
946 Replacement Block Set 31-7122 5.49
EXHAUST
34-2110
TIRES &
MOTION PRO® BikeMaster® WHEELS
34-2111 RATCHET SPARK PLUG 3-WAY PLUG WRENCH
MSR® WRENCH • Fits all 10, 12, and 14mm spark plugs CONTROL
• Made specifically for water cooled • Sold individually; for box order 10
WATER-COOLED PLUG 2-stroke motorcycles 15-0335 $7.95
WRENCH • Easy installation and removal of the
spark plugs SEATS &
• Low-profile design for easier access GRAPHICS
34-2110 $8.95 • Use one side for installation and flip it
over for removal
15-8147 $18.95
MSR® BODY
STANDARD SPARK PLUG
WRENCH MOTION PRO® 4-STROKE
• Standard design for open areas SPARK PLUG TOOL PIT BIKE
34-2111 $6.95 • Special thin wall design for water-
cooled 4-strokes with 5/8” plugs
MOTION PRO® • Unique 2-step extension -
swivel or fixed ENGINE
SPARK PLUG SOCKET • Socket can be used with a screwdriver
• Originally designed for Honda XR400s to hold the front 19mm hex axles on
as a trail tool but fits many models with late-model 4-stroke motorcycles
18mm plugs FUEL & AIR
• For use on KTM 4-strokes, DRZ400,
• The thin wall socket is designed to fit CRF450R, YZ/WR400/426F,
into the plug cavity YZ250F, KlX300, DVX400 and more
• Can be driven with 3/8” ratchet, 15-8239 $22.95 DRIVE
Motion Pro® Ratchet spark plug wrench,
13/16” wrench, tool kit bar or phillips
screwdriver
BikeMaster® HONDA P/N Retail BRAKE
WIRE STRIPPERS XR400 96-04, XR500R 83-84, XR600R 92-00,
• Strips 4 insulation or wire diameter: XR650L 93-07 15-8175 $22.95
1.0, 1.6, 2.0 and 2.6mm KAWASAKI
• Fast and clean removal of insulation KLF400 93-96 15-8175 $22.95 SUSPENSION
• Automatic clamping and length gauge KTM MOTION PRO®
facility ensure uniform stripped ends 400 SXC 2000, 620LC4 96-97,
15-1533 $20.95 620SX 97-98, 640 LC4 99 15-8175 $22.95 13/16” EXTENSION SOCKET
YAMAHA • 13/16” extension socket for #15-8147 ELECTRICAL
XT225 92-02, TT600 1985 15-8175 $22.95 15-8291 $10.99
CHEMICAL
SECURITY &
TIEDOWNS
SHOP
SUPPLIES
BikeMaster® ACCEL 300+ CRIMP
MULTI CRIMP HEAVY-DUTY TOOL
LEVER PLIERS • Hardened steel frame, molded DISPLAY
non-slip hand grips & PROMO
• Professional crimpers come with the
NGK CABLE SPLICER perfect jaw for each type of connector
• Adjustable ratchet mechanism
• Splices NGK cables to sealed CDI • Includes 3 removable stripping/crimping
• Made from hardened tool steel, they die type jaws: One for spark 7-mm CROSS
systems will last a lifetime REFERENCE
• Saves the expense of replacing the plug wires and 2 styles for primary wire
15-1660 $64.95 terminals
entire ignition system
38-1024 $7.73
21-0782 $90.99 947
EXHAUST
TIRES &
WHEELS
MOTION PRO®
MULTI-VALVE TOOLS BikeMaster®
CONTROL • Used to install valve spring keepers
20-BLADE METRIC FEELER
• Replaces the large cumbersome valve GAUGE SET
spring compressor • Contents: 0.05-1.0mm
• Designed to fit the valves of 4 and 5 • 100mm long blades, hardened
SEATS & valve-per-cylinder heads (5mm valve
GRAPHICS and polished
stem diameter or smaller) • Sold as 3 pack
• Made in the USA
• The perfect accessory is our flexible
MOTION PRO® 15-1526 $7.95
BODY nylon magnetic pickup tool and our TIMING PLUG WRENCH
impact tool • For straight slot timing covers
15-8165 $115.95 • Designed for hard-to-reach timing plugs
• 3 blade sizes: 16, 22, and 38mm
PIT BIKE 15-8087 $22.95
BikeMaster®
ENGINE 12-BLADE COMBINATION
TAPPET FEELER GAUGE SET
• Blades: dual marked 0.203mm/0.008”
FUEL & AIR to 0.660mm/0.026”
IMPERIAL VALVE • 95mm long taper blades, hardened
SPRING COMPRESSOR and polished
• Compact cage design • Sold as 3 pack
DRIVE 15-1525 $6.95
15-1300 $72.99
MOTION PRO® VALVE
BRAKE SPRING COMPRESSOR
• Improved quick action design
• Both cup-type and ball-type tips
are included
SUSPENSION • Replaces 07757-001000 and BikeMaster®
AKS-215-0101 O.E.M. tool 32-BLADE DUAL READING
• Accepts Motion Pro® adapters
(15-8248) as well as O.E.M. adapters COMBINATION FEELER
ELECTRICAL
BikeMaster® 07GME-KT0200, 07JME-KY20100 GAUGE SET
and 07959-KM30101 for use in “shim • Dual marked 0.03mm/0.001” to
VALVE SPRING under bucket”and small diameter valve 1mm/0.040”
CHEMICAL COMPRESSOR spring keeper applications
15-8247 $119.95
• 95mm long taper blades, hardened
• Fully adjustable for just about any head and polished
and valve height • Sold as 2 pack
15-1527 $9.95
SECURITY & • Fully closed 2-3/4” (7 cm) to fully open
TIEDOWNS 9” (23 cm) give a broad range
15-1649 $69.95
TRAILER &
STANDS
EXHAUST
TIRES &
WHEELS
CONTROL
MOTION PRO®
MOTION PRO® 2-STROKE MOTION PRO® 4-STROKE COMPRESSION TEST SET SEATS &
GRAPHICS
• Contains hoses for 10, 12 and 14mm
LEAK DOWN TESTER LEAK DOWN TESTER spark plug applications
• Checks possible air leaks through seals • Designed to check percentage of • Kit includes a quick disconnect with
or gaskets on 2-stroke engines cylinder leakage in a 4-stroke engine pressure release valve, 300 psi gauge BODY
• Complete with air pressure gauge, • Can pressurize the cylinder with 60 psi of and plastic carrying case
pump-up-bulb and adapter for single air with one air source of 70 to 160 psi 15-8188 $114.95
and twin 2-cycle engines • The gauge will register the total leakage
• Instructions included PIT BIKE
past the rings, head gasket, intake and
06-8071 $310.95 exhaust valves
• Kit includes 10, 12 and 14mm spark
plug adapters, regulator and gauge ENGINE
15-8126 $167.95
BikeMaster®
DUAL READING FUEL & AIR
DIGITAL CALIPER
• Hardened stainless steel
• Reading 0.01mm and 0.0005” DRIVE
• Range 0-150mm / 0-6”
15-1531 $80.95
BRAKE
MOTION PRO®
PISTON PIN PULLER DELUXE
• Interchangeable piston adapters for use
SUSPENSION
DIGITAL on both long skirt and short skirt
(slipper) pistons
VERNIER CALIPERS 29-2291
• Fits all piston pins from 12mm (1/2”)
• A quality, precise, high-tech
measuring device to 24mm (1”) ELECTRICAL
• LCD display • Made of 6061 aluminum with non-
• Measures up to 150mm or 6” marring aluminum adapters and
42-0446 $79.95 29-2290 durable blue anodized finish
• Patent pending CHEMICAL
15-8472 $71.99
K&L
DIAL INDICATOR GAUGE SECURITY &
& MAGNETIC BASE STAND TIEDOWNS
Description P/N Retail
2-1/4” Dial Indicator Gauge with TRAILER &
Magnetic Base Stand 29-2290 $56.99 STANDS
2-1/4” Dial Indicator Gauge only, 0” - 2-1/4” range
PARK TOOL USA in .001 increments 29-2315 30.99 MOTION PRO®
DIGITAL CALIPERS
Flexible Magnetic Base Stand only 29-2291 78.99 PISTON PIN TOOL TOOLS
• For removing pressed in piston pins
• Displays metric, decimal inch and
fractional inch to 1/128” • May be used with engine in frame on
• Large LCD display single or multi-cylinder engines SHOP
• Measures external, internal, depth and 06-8068 $76.95 SUPPLIES
stepped dimensions
• Resolution:
+/- 0.01mm/0.0005”/1/128” DISPLAY
& PROMO
• Accuracy: MOTION PRO®
+/- 0.02mm/0.001 (-100mm)
• Repeatability: +/- 0.01mm/0.0005” STUD INSTALLATION TOOLS
• Protective case and battery included • Installs the cylinder studs on most MOTION PRO® CROSS
REFERENCE
• Includes 1 battery, size SR44 motorcycles without damage to the threads IGNITION SYSTEM TESTER
• Automatic shut off • Hex head is 3/4” or 19mm • Tests the integrity and strength of
• Weight: 2 lbs. • Set of 3 (6, 8, and 10mm) ignition system 949
15-1260 $58.95 15-8152 $23.95 15-8122 $11.95
SEE CATALOG UPDATES AT
TOOLS
OFFROAD
TOOLS
CRANKCASE SPLITTERS
EXHAUST
TIRES &
WHEELS
CONTROL
DRIVE
BRAKE
MAGURA
SUSPENSION
HYDRADULIC CLUTCH
PRO BLEEDER
BikeMaster® • Professional bleed kit
MOTION PRO® CLUTCH & PRIMARY TOOL • Makes Magura clutches much easier
ELECTRICAL • 6mm bolts supplied with 5/8” thru bolt and cleaner
CRANKCASE SPLITTER • For removing clutch bodies, flywheels, • Works with all Jack and O.E.M.
• Will work on most 2 and 4-stroke and primary gears clutches (KTM, Husqvarna, etc.)
engines with vertically split cases • For mini MX 50cc racers • Includes all fittings and Magura blood
CHEMICAL
• Includes 6 and 8mm mounting bolts 15-0619 $25.95 86-0128 $111.99
• Eliminates binding under heavy loads
15-8245 $190.95
SECURITY &
TIEDOWNS
TRAILER &
STANDS
TOOLS
MOTION PRO®
SHOP COUNTER BALANCER &
SUPPLIES
MOTION PRO® CLUTCH HUB SPANNER FOR HONDA
• Replaces 20mm end of Honda O.E.M. ool 07716-0020100
ADAPTER/BORE PROTECTOR SET
DISPLAY • Set includes 3 adapters and 3 bore protectors of use with the • Used to remove Honda O.E.M. nut 90231-Ky4-900
& PROMO • 4-Pin spanner made of heat-treated steel
quick action valve spring compressor (15-8247) • Inside diameter is 20mm
• 23mm bore protector can be used with the small multi-valve • Use with 3/8” driver
CROSS tool (15-8165) in shim-under-bucket applications • Fits counter balancer nut on: CRF450R 02-06, CRF450X 2005
REFERENCE • Replaces 2K-07-S04, 07GME-KT70200, 07959-KM70100, • Fits clutch hub nut on: PC50 69-70, Z50 68-99, S65 65-69
07JME-KY20100, 07JMG-KY20100, 07959-KM 30101 and • Fits crank shaft nut on: CA100 (Trail 50) 61-62, CA102 62-69,
950 07HRMG-MR70002 CA105 (Trail 50) 63-65, CA110 62-69
15-8248 $38.95 15-8385 $9.95
EXHAUST
TIRES &
WHEELS
CONTROL
BikeMaster® BikeMaster®
65-80MM ADJUSTABLE OIL FILTER SEATS &
GRAPHICS
FILTER WRENCH SPANNER WRENCH
• Heavy-duty, forged and machined steel • Can be used with 3/8” drive impact,
parts air impact, torque ratchet or other IMPERIAL OIL FILTER
• Tightens it’s grip on the filter the more BODY
drive tools
torque you apply • Compact 3/4” by 1-3/16” diameter CUP WRENCHES
• Fits all round filters from 2-3/8” to • Makes even hard-to-reach filters easy
• 4-stroke Honda singles 90 thru 350cc
3-1/4” to change
• 4-stroke Honda twins 160 thru 500cc Description P/N Retail PIT BIKE
15-1577 $69.95 15-0600 $13.95 65mm
• Fram PH6017A
• Honda OE# 15410-MM5-013 ENGINE
• Kaw OE# 16097-1061, 63, 64
15-1324 $9.99
65/67mm
• Fram PH6017A for Hon/Kaw/Yam FUEL & AIR
• Fram PH6018 for Suz
15-1326 $10.99
68mm
• Suz OE# 16510-06B00, 01 DRIVE
15-1327 $9.99
74mm
MOTION PRO® OIL FILTER MOTION PRO® • Emgo 10-82411 for Harley Davidson®
BRAKE
REMOVAL TOOL OIL FILTER STRAP WRENCH 15-1321 $9.99
• For easy removal of recessed KTM • Fits all spin-on type oil filters. 74/76mm
oil filters 06-8069 $9.95 • Fram PH6010A, PH6016, PH6022
• Conical point screw to pierce and grab for HD SUSPENSION
sheet metal end cap • Fram PH6010A for Hon/Kaw
• Contoured handle for secure grip • Fram PH6016 for Suz
15-8400 $13.95 15-1322 $9.99
76mm ELECTRICAL
• BMW OE# 11421460845
• (Perf-Form) BMW1
• Harley Davidson® OE# 63805-80A, 80T
• Harley Davidson® OE# 63806-83 CHEMICAL
• (Perf-Form) HD1
15-1320 $9.99
76mm SECURITY &
• Ducati OE# 090549960 TIEDOWNS
• Moto Guzzi OE# 1415300
15-1325 $9.99
80mm TRAILER &
• Fram PH6010A, PH6016 for HD 80mm STANDS
• Hon OE# 15400-MJO-003, 004
• Hon OE# 15410-MBO-003
MOTION PRO® OIL FILTER MOTION PRO® • Kaw OE# 16097-1054 TOOLS
& CLUTCH HUB SPANNER OIL FILTER WRENCH • Suz OE# 16510-05A00
• Made of heat-treated steel • Designed to remove and install spin-on • Fram PH6010A for Hon/Kaw
• Use with a 3/8” drive ratchet oil filters • Fram PH6016 for Suz SHOP
• Inside diameter is 24mm • Fits V-4 Hondas 15-1323 $9.99 SUPPLIES
• Designed to fit oil filter and clutch hub • Fits most other Japanese bikes
on many Honda single and twin • Allows you to torque filter to proper spec
cylinder models 15-0419 $9.95 DISPLAY
NOTE: Fits most pre-78 CB, CL, CT, SL XL & PROMO
models, XR200 80-84, XR200R 81-94,
XR250L 91-94 and XR250R 86-94 CROSS
15-8015 $9.95 REFERENCE
951
EXHAUST
15-8269
TIRES &
WHEELS 15-8260
MOTION PRO®
CONTROL HONDA XR SEAL/BEARING 15-8261
RETAINER TOOL
• Replaces O.E.M. tool 07710-0010100
SEATS & to remove and replace the rear wheel
GRAPHICS bearing/seal retainer ring, p/n 41231-
429-000 and 41231-286-000
MOTION PRO® • Versatile design features a 22 mm hex 15-8262 15-8458 15-8459
BODY HONDA CR SEAL/ and 3/8” ssquare drive
BEARING RETAINER TOOL • Precision design prevents damage to MOTION PRO®
the retainer ring after peened stakes”
• Versatile design features a 22mm hex
have been removed by drilling BEARING REMOVER SET
and 3/8” square drive • Dependable split collect design
PIT BIKE • Precision design prevents damage to • Fore use on: XR650L 93-04, XR650R • Includes new metric sizes to allow use
93-04, XR600R 85-00, XR 500R 81-84, with recent MX and Euro motorcycles
the retainer ring after peened “stakes” XR350R 83-85, XR250R 84-91,
have been removed by drilling • Replacement pieces available
MR250 76, CR250M, CR250 M1 • 28mm fits rear wheel bearings on
ENGINE • 44mm, replaces O.E.M. tool 07710- and CR250M 76
0010200, to remove and replace the 02-08 Suzuki: GSXR 600, 750 & 1000
15-8227 $18.95 • 30mm fits front wheel bearings on
rear wheel bearing/seal retainer ring,
03-08 KTM Offroad (125cc and up)
p/n 41231-KZ4-000 • 8-piece set includes large and small
FUEL & AIR • For use on: CR125/250R 84-86,
driver rod 10, 12, 15, 17, 20, and
89-99 and CR500R 84-86, 89-01 25mm removers
15-8228 $18.95 Description P/N Retail
DRIVE Bearing Remover Set 15-8269 $58.95
Large Driver Rod 15-8260 16.95
Small Driver Rod 15-8261 9.95
10mm Remover 15-8262 3.99
BRAKE 12mm Remover 15-8263 5.95
15mm Remover 15-8264 6.95
MOTION PRO® 17mm Remover
20mm Remover
15-8268
15-8266
7.95
8.95
SUSPENSION SEAL/BEARING TOOL 25mm Remover 15-8267 10.95
FOR HONDA XR 28mm Remover 15-84581 11.95
• 22mm hex and 3/8” square drive 30mm Remover 15-84591 11.95
1 Not included in 8-piece set
• Precision design prevents damage to
ELECTRICAL the retainer ring after peened “stakes”
MOTION PRO® have been removed by drilling
• Replaces the O.E.M. Honda tool to
SEAL/BEARING 47MM remove and replace the rear wheel
CHEMICAL
TOOL FOR HONDA CR bearing/seal retainer ring, p/n 41231-
• Versatile design features a 22mm hex 430-000
and 3/8” square drive • For use on CR250R 78-81
SECURITY & • Precision design prevents damage to 15-8290 $18.95
TIEDOWNS the retainer ring after peened “stakes”
have been removed by drilling
TRAILER & • 47mm, replaces O.E.M. tools 07HMA-
STANDS KS70100, and 07YMA-KZ40100, to
remove and replace the rear wheel
bearing/seal retainer rings, p/n’s
41231-KZ4-J20 and 41231-KS6-700
TOOLS • For use on CR125/250R 87-88,
00-02, CRF450 02-06, CRF450X
MOTION PRO®
05-06, and CR500R 87-88 DELUXE SUSPENSION
SHOP 15-8256 $19.95 BEARING SERVICE TOOL
SUPPLIES • Designed for quick and easy removal and precise
installation of suspension linkage and swingarm pivot bearings
• Designed for use on 20 & 22mm I.D. bearings
DISPLAY • Fits most offroad motorcycles and ATVs
& PROMO • Includes blind bearing collet for removal of 20mm blind bearings
• Kit includes Blind Bearing Puller adapter which can also be used as an accessory with
the Motion Pro® Blind Bearing Remover set
CROSS • Anodized aluminum mandrels reduce the possibility of damaging bearing surfaces
REFERENCE • Laser etched markings for easy size identification
• Eliminates the need for a shop press
952 • Protective blow-molded case for easy storage
15-8294 $164.95
EXHAUST
TIRES &
WHEELS
CONTROL
MOTION PRO® MOTION PRO® MOTION PRO® ROTOR/
GEAR JAMMER CAM GEAR HOLDER SPROCKET HOLDER
• Locks gears in place for • Allows you to easily torque the cam • Keeps flywheels, rotors and sprockets SEATS &
easy installation and removal gear bolts on a CRF450R 02-06/ from rotating while removing or GRAPHICS
• Allows tightening lock nuts to proper TRX450R/ER 04-08 without a tightening their fixing adjuster
torque setting second person • Holds sprockets and rotors with holes
• Works on virtually any motor • Holds cam gear in place during removal center to center at a minimum distance
of 13mm and a maximum distance of BODY
• Powerful magnet holds tool in place and installation of cam gear bolts
• Works on stock and aftermarket 230mm
during use • Features 5 and 9mm pins
• Billet 6060 T-6 aluminum construction CRF450R/TRX450R/ER 04-08
• Adjustable stop-screw keeps tool open
• Originally developed for removing and cam gears at set distance PIT BIKE
installing the primary gear on a Honda • Billet 6061 T-6 construction with 15-8270 $38.95
CRF450 hardened steel pin
• Made in USA • Blue anodized finish with laser
15-8427 $18.95 engraved logo ENGINE
• Made in USA
15-8437 $24.95
FUEL & AIR
BikeMaster® DRIVE
TELESCOPIC MAGNET LIGHT
• Narrow head fits almost everywhere
• Low consumption, super bright L.E.D.
BikeMaster® • Ergonomic high grip handle
BRAKE
L.E.D. FLASHLIGHT • Chrome telescopic tubes for long life
• Ultra bright,white light 15-1659 $9.95
• Very long battery life (3 AAA batteries) SUSPENSION
• Satin chrome finish
• Water-resistant (sealed with O-rings)
15-1564 $19.95
ELECTRICAL
CHEMICAL
BikeMaster®
WORK LIGHTS
• These compact folding units throw out SECURITY &
so much light you’ll be able to work on BikeMaster® TIEDOWNS
anything
• Comes in 2 styles, the first is operated SHORT NECK MAGNET
by AA batteries, and so doesn’t have HEAD THIN LIGHT TRAILER &
STANDS
the extra weight • Like our Long Neck Light, but with a
• Second is rechargeable, with both a
BikeMaster® magnetic twist
cigarette lighter or a wall outlet power LONG NECK NON-MAGNET • Light right where you need it! Even
TOOLS
adaptors HEAD THIN LIGHT inside a cylinder, but with a magnet on
• Rechargeable is a little heavier, but it’s • Light right where you need it! Even the end
always ready to go inside a cylinder • This thin head means illumination in
• Both units come with a powerful magnet • Thin L.E.D. technology means even the smallest spaces and a way to SHOP
built in to secure them to any convenient get that fallen screw SUPPLIES
illumination in even the smallest spaces
metal surface • Narrow enough to put the light in and • Narrow enough to put the light in, and
• Plus, their heads tilt and stay in position still see past it still see past it DISPLAY
so you can angle the light perfectly • Couple this with the long flexible • Couple this with the flexible extension, & PROMO
• They automatically turn on when open, extension and there is almost nowhere and there is almost nowhere you can’t
and off when closed you can’t see see or pick up
• Matt black rubberized finish for a non- • Included is a powerful magnetic base so • Included is a powerful magnetic base so CROSS
slip grip that you can locate the light and still be that you can locate the light and still be REFERENCE
Desription P/N Retail hands free hands free
Non-rechargeable 15-1662 $9.95 • Extension stays where you bend it • Extension stays where you bend it 953
Rechargeable 15-1663 19.95 15-1646 $29.95 15-1647 $29.95
EXHAUST
TIRES &
WHEELS
15-0601 15-0604 15-0605 15-0606 15-0611 15-0612 15-0614 15-0615
CONTROL
SEATS &
GRAPHICS
15-0616 15-0617 15-0620 15-0621 15-0624 15-0628
BODY
PIT BIKE
EXHAUST
PERFORMANCE FILTERS
TIRES &
MOTION PRO® WHEELS
MAGNETO FLYWHEEL PULLERS K&N®
• Heat treated MAGNETO FLYWHEEL PULLERS
HONDA P/N Retail HONDA P/N Retail CONTROL
CT90/350G/360/500/500T, CM185/200T/450, 15-0462 $10.95 CT70, 110 CR125R, 250R, 480R, XL/XR75/80/100, 15-0608 $31.95
CMX250, Early CR125/250MX, SL175/350 100S,100R,170
CR80R/125R/250R/450R/480R/500R, 15-0463 15.95 (All) XL/XR-250/350/500/600, FT250 15-0609 41.95 SEATS &
XL80/100/100S/170, CR100/100R, GRAPHICS
KAWASAKI
XR50/CRF50 00-04, FL250 KV75, KD/KX80, KDX80, 15-0608 $31.95
TL250, XL250/350/500/600, XR500/600/650L 06-8074 9.95 KE/KH/KM100, KD/KE/KS125 15-0608 31.95
KAWASAKI SUZUKI BODY
KLF300 86-87, KLT110/200, KX125/250/ 15-0462 $10.95 50,70,90,100,120,125 (except RM125) 15-0608 $31.95
420/500 Pre 81 Models
YAMAHA
KZ1000/1300, Z1 15-0462 10.95
KD80, KX80, KDX80, KM/KS100, KS125, 15-0463 15.95 CDI Flywheel Models, Tri-Moto YT125 15-0608 $31.95 PIT BIKE
Most large rotor flywheel models and early ignition 15-0463 15.95
point flywheel engines
SUZUKI
ENGINE
DR100/125/200, DS80, 15-0463 $15.95
GS550/650/750 Early 1100, Most 4 cycle street models 15-0462 10.95 MOTION PRO® FLYWHEEL PULLER
50/70/50/90/100/125cc Trail & Street models 15-0463 15.95 • Replaces Honda O.E.M. tool 07AMC-MEBA100,
YAMAHA Kawasaki O.E.M. tool 57001-1565, FUEL & AIR
TT225 15-0462 $10.95 Suzuki O.E.M. tool K5700-11565-LPT
Most single cylinder off road enduros, MX, YZ & 15-0463 15.95 • Includes shaft protector cap
Quads W/External Flywheels, (O.E. reference 07AMC-MEBA110)
1968 & later, BW80, Riva 50, PW50, YSR50, 15-0463 15.95 • Thread 24mm X 1.5 R.H. internal thread
DRIVE
YT125/175, YZ400F, RZ350, IT350/500, XT500/600 15-8257 $30.95
BRAKE
MOTION PRO®
FLYWHEEL PULLER
FOR YAMAHA SUSPENSION
• Replaces O.E.M. tool
YM04141
• Yamaha WR250F 03-07 ELECTRICAL
• M30 x 1.0 RH internal
15-8386 $24.95 MOTION PRO® MOTION PRO®
FLYWHEEL PULLER 20MM FLYWHEEL PULLER CHEMICAL
FOR 4-STROKE KTM FOR HONDA
FLYWHEEL • Replaces O.E.M. tool 580.12.009.000 • Fits XR400, CB400A/T (78-79),
PULLER • Includes shaft protector cap CB450SC, CM450, CMX450C,
CX500TX, CX650, GL500/650,
SECURITY &
(O.E. reference 510.12.016.000)
M28xP1.0 • Thread 26mm X 1.0 R.H. internal thread MR250, NX250, PC800, VF700C
TIEDOWNS
INTERNAL THREAD • Fits KTM 200RFS/400/450/520/525 (1987), VFR800FI (98-00) VTR250
• Includes crankshaft protector cap 15-8293 $20.95 15-8086 $11.95 TRAILER &
• For Honda CRF450X 04-09 and STANDS
Kawasaki KLX 450R 2008
15-0425 $28.95
TOOLS
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
BikeMaster® MOTION PRO® FLYWHEEL PULLER/
BODY
BEARING REMOVAL KIT BLIND BEARING PRIMARY GEAR
• A bearing must be removed at 90° to
its fitted surface, and removed evenly all REMOVAL SET EXTRACTOR KTM50
• Set includes 30, 25, 20, 17, 15, 12, 10 • Designed to remove the rotor and
the way around
and 8mm collets primary gear on KTM 50 02-07
PIT BIKE • So, to avoid damage, and prevent • 2 pound hammer
loading the bearing too much on one • Comes with 4mm, 5mm and 6mm
• Crossbar type shaft allows easy collet hardware
side, use this bearing removal kit removal
• Comes with collets in the most popular • Replaces O.E.M. tool 59029021044
ENGINE • Fitted storage box included 15-0423 $24.95
sizes 8, 10, 12, 15, 17, 20, 25, 30 mm • Necessary tool for most transmission
• Complete with slide hammer, and rebuilds
comes in a durable plastic storage and 15-8292 $255.95
FUEL & AIR carrying case
15-1645 $194.95
DRIVE
BRAKE
SUSPENSION
TOOLS
MSR® HEAVY-DUTY
SHOP SPRING HOOK
SUPPLIES • Take the danger and difficulty out of
removing and installing the exhaust
DISPLAY CruzTOOLS® pipe springs on your machine
• Heavy-duty construction
& PROMO MAXHOOK™ SPRING HOOK 34-2112 $9.95
• The tip is CNC-machined, using heat-
treated carbon steel
CROSS • PVC-coated handle
REFERENCE
15-4014 $9.95
956
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
BikeMaster® GRAPHICS
BikeMaster® DELUXE VACUUM TESTING
ECONOMY VACUUM TESTING BRAKE BLEEDING KIT
BRAKE BLEEDING KIT • Professional level heavy-duty pump BODY
• Remove all sponginess from brake system for a safer street ride • Brass body and fittings, rebuildable, pump, spare seal,
or faster lap times heavy-duty steel handles with thick shock reducing vinyl
• True “1-Person Operation”, find vacuum leaks without an assistant handles, takes the work out of vacuum pumping for brake PIT BIKE
• Comes complete with everything you need to bleed both brakes bleeding or testing
and test vacuum circuits on today’s modern motorcycles • Gauge with readings to -1.0 Bar (-30 inHg)
• Comes with vacuum gauge equipped pump, fluid collector, • Extra long hoses and a myriad of adapters make this the
hoses (long and short), adapters for just about any situation, choice for the professional or for the serious home mechanic ENGINE
spare vacuum pump seal and protective carrying case • Can be used for automotive and marine uses too, including
15-1612 $84.95 engine vacuum systems for emissions, automatic transmission, etc.
• Comes in a heavy-duty protective carrying and storage case FUEL & AIR
15-1613 $109.95
DRIVE
BRAKE
SUSPENSION
CROSS
REFERENCE
957
EXHAUST
TIRES &
WHEELS
CONTROL
SECURITY &
TIEDOWNS
TRAILER &
STANDS 34-0490
958
EXHAUST
TIRES &
15-1544 WHEELS
15-1543
CONTROL
DRIVE
BRAKE
TOOLS
SHOP
SUPPLIES
DISPLAY
& PROMO
K&L TIRE TAMER
• Holds the bead away from rim for easy valve stem,
rim lock and tube installation CROSS
• Patent pending REFERENCE
29-2294 $21.99
959
EXHAUST
TIRES &
WHEELS
ENGINE
CHEMICAL
15-8326
SECURITY &
TIEDOWNS 15-8284
TRAILER &
STANDS
EXHAUST
TIRES &
K&L TIRE VALVE STEM INSERTER WHEELS
• Simplifies the installation of valve stems in tubeless tires BikeMaster®
29-2298 $16.99 VALVE STEM MOUNTING TOOL
• The only way to go if you want a secure undamaged valve stem CONTROL
• Allows a straight pull on the stem
• Force is evenly distributed on the stem so it seats correctly and
seals the first time SEATS &
• Durable non-marring plastic coating on shaft GRAPHICS
• Made from forged chrome vanadium
for a lifetime of service
15-1569 $17.95 BODY
MOTION PRO®
VALVE CORE REMOVER BikeMaster®
• Made from hex stock TIRE VALVE REPAIR TOOL PIT BIKE
• Allows for easy removal and installation of standard valve • Cleans internal and external valve stem
cores in tubed or tubeless valve stems threads and removes valve cores
15-8183 $2.95 15-1540 $5.95 ENGINE
BikeMaster® DRIVE
TIRE VALVE PULLER
• Simply thread the puller through the valve hole in the rim,
screw the cap onto the valve stem of the inner tube, seat the
tube inside the tire and once the second tire bead is in place, BRAKE
simply pull the valve stem into place
• Easy to use, you will wonder how you survived without it
15-1618 $9.95 SUSPENSION
BikeMaster® ELECTRICAL
2-PIECE TIRE MOUNTING
STRIDE TOOLS TIRE VALVE TOOL WHEEL RIM PROTECTORS
• Replaces bothersome leaky or broken valve stems on ATVs
and motorcycles • If you own tire irons, then you should own a set of these CHEMICAL
• Allows the user to replace the valve stem without breaking inexpensive protectors
down the tire from the wheel, a great time saver • Slip them between the wheel and tire to avoid expensive and
15-1305 $34.99 ugly damage to your wheels SECURITY &
15-1591 $7.95 TIEDOWNS
TRAILER &
STANDS
EXHAUST
TIRES &
WHEELS
BRAKE
SUSPENSION
ROWE U.S.A™
STEEL SPOKE WRENCH
• Steel MOTION PRO® SPOKE WRENCH
• Fits 6 common spoke nipple sizes • Chrome vanadium tool steel with a hard nickel-pewter finish
ELECTRICAL • Made in USA • Square end openings which grip the spoke nipple on all 4 sides
15-1351 $8.95 • Offset slotted ends make it easy and quick to use
15-8296 $14.95
CHEMICAL
SECURITY &
TIEDOWNS
TOOLS
EXHAUST
SHOP
SUPPLIES
EXHAUST
TIRES &
WHEELS
CONTROL
BikeMaster®
BikeMaster® TIRE AND TUBE
SEATS & TIRE REPAIR KIT FLAT REPAIR KIT
GRAPHICS • Latest design of insertion gun, with more
leverage than old piston grip designs
• Covers tubes and tubeless repair BikeMaster®
• Comes complete with patches, plugs,
• Complete kit means you are ready to fix plug insertion tool, hole cleaner, glue, TIRE AND TUBE PATCH AND
BODY a flat on the road or at home pressure wheel with surface preparation PLUG REPLACEMENT KIT
• Comes with insertion tool, plugs, awl, tool and knife for plug trimming • Complete kit with all the patches and
rubber cement and trimming • Includes 4 CO2 Compressed air plugs that come in the BikeMaster® Tire
• Everything you need to make sure you cylinders and an air valve which can and Tube Flat Repair Kit
PIT BIKE
make it to safety connect directly to the tire valve, or use • Perfect for restocking your repair kit
• Durable carrying case included the flexible air line, also included for after use or keep extra supplies around
15-1637 $35.95 hard-to-reach valves the shop
ENGINE 15-1507 $44.95 15-1508 $3.95
DRIVE
BRAKE
TUBELESS TIRE SHOP STOP & GO
REPAIR KIT DELUXE TIRE REPAIR
• Professional quality tubeless tire repair kit
SUSPENSION • Allows permanent repair of puncture TRAVEL KIT
• High quality tire repair kit
damage while tire remains on rim • Provides everything necessary for “on STOP & GO
• In some cases removal of wheel from the road” repair of both tube and TUBELESS TIRE
ELECTRICAL vehicle may not even be required tubeless type tires
Application P/N Retail • Includes a unique engine driven air PLUGGER WITH CO2
Tubeless Tires 15-0207 $44.95 pump for inflating tires • Seals from inside/out
Replacement Plugs 15-0205 $45.95 • Repair punctures without
CHEMICAL For Use With #15-0207, dismounting tire from wheel
• Complete with CO2 to re-inflate tire
15-0213 & 15-0215 15-0209 $14.95 • Compact size (8” x 5” x 1”)
• Comes in zipper pouch weighing
SECURITY &
TIEDOWNS only 22 oz.
Description P/N Retail
Plugger 15-0215 $48.95
TRAILER & Replacement Plugs 15-0209 14.95
STANDS
TOOLS
SHOP
SUPPLIES
STOP & GO CAMEL
DISPLAY TUBELESS TIRE PLUGGER ON-THE-WHEEL
& PROMO • Seals from inside/out TUBELESS TIRE KIT
• Repair punctures without dismounting tire
• Includes 6 repair strips, cement and
CAMEL
from wheel
CROSS • Compact size (3-1/2” x 7-1/2” x 1”)
insert tool ROUND TIRE PATCH KIT
• For mounted tire repair Repair kit includes:
REFERENCE • Has zipper pouch weighing only 12 oz. • Temporary repairs only • 4 small patches
Description P/N Retail 15-0169 $7.95 • 2 large patches
964 Tire Plugger 15-0213 $32.95 • Cement and buffer
Replacement Plugs 15-0209 14.95 15-0168 $4.95
07-0609
EXHAUST
TIRES &
WHEELS
CONTROL
07-0613
SEATS &
GRAPHICS
SHOP
SUPPLIES
THREEBOND DISPLAY
SEAL “N” AIR & PROMO
HELIX® RACING • Temporary repair of flat tires
FOOT PUMP • 6 oz. bottle
• Sold as case of 24, priced CROSS
• Compact pump folds up to REFERENCE
save space individually
53-0670 $10.25 53-0407 $9.65
965
EXHAUST
07-0652
TIRES &
WHEELS
SECOND WIND MTB
• Compact hybrid CO2
MICROFLATE NANO hand pump
• Lightweight mini CO2 inflator
• Allows you to inflate using
CONTROL • Flow control valve
• Valve connection: push on fits presta, CO2 or hand pump feature
screw on fits schrader
GENUINE INNOVATIONS simultaneously without
SEATS &
Description P/N Retail MONSTER AIR CHUCK KIT removing CO2 cartridge
Microflate 07-0652 $15.99 • Fast and fully controllable mini inflator • IH-intelligent head automatically detects
GRAPHICS • Push to inflate technology and locks onto either presta and schrader
25g threaded 07-0626 10.99
16g threaded 6pk 07-0643 21.99 • All brass and aluminum construction valves with no threads or adapters
16g threaded 20pk 07-0642 71.49 • Includes two 45 gram CO2 cartridges Description P/N Retail
BODY 07-0658 $35.95 Pump 07-0654 $31.99
16g Non-Threaded 6 pk 07-0646 15.99
45g 5/8” Threaded 2 pk 16g Non-Threaded 20 pc. Tub 07-0647 45.99
07-0648 $29.99 16g Threaded 6 pk 07-0643 21.99
PIT BIKE 16g Threaded 20 pc. Tub 07-0642 71.49
25g Cartridge Threaded 07-0626 10.99
ENGINE
07-0653 ULTRAFLATE 2
07-0626 TIRE INFLATOR
FUEL & AIR 34-0341 • Controllable tire inflation
• Uses any size, threaded CO2
cartridges and the inexpensive
BB gun type non-
DRIVE
34-1020 threaded CO2 cartridges
• New dual-purpose nozzle
C02 PUSH-ON pushes on for
presta valves and screws on
BRAKE AIR CHUCK SL for shrader valves
MSR® • Top-of-the-line mini CO2 inflator made Description P/N Retail
TIRE INFLATION KIT of nickel plated alloy Pump w/16g Cartridge 07-0616 $16.99
• Compact carrying pouch fits in fanny pack • Less than half the weight of previous Ultraflate Plus Pump
SUSPENSION
• Comes with 3 CO2 cartridges and a air chucks w/16g Non-Threaded Cartridge - Accepts
right-angle inflator • Push on presta or schrader valves all CO2 cartridges 07-0649 21.49
Description P/N Retail Description P/N Retail 12g Non-Threaded 3 pk 07-0612 6.99
ELECTRICAL Inflation Kit 34-0341 $22.95 Air Chuck SL 07-0653 $18.99 25g Cartridge Threaded 07-0626 10.99
Repl. CO2 Bottles 5 pk. 34-1020 15.95 16g Threaded 6 pk 07-0643 21.99 12g Non-Threaded 50 pc Tub 07-0641 85.99
Repl. Right Angle Inflator 07-0652 15.99 16g Threaded 20 pc Tub 07-0642 71.49 16g Threaded 20 pc Tub 07-0642 71.49
with 16g CO2 25g Threaded 07-0626 10.99 16g Thread 6 pk 07-0643 21.99
CHEMICAL 16g Non-Threaded 2 pk 07-0655 8.99
16g Non-Threaded 6 pk 07-0646 15.99
16g Non-Threaded 20 pc tub 07-0647 45.99
SECURITY &
TIEDOWNS
QUADBOSS TIRE SEALANT
• Seals up to 1/2” puncture
TRAILER & in the tread and 1/4” puncture
STANDS in the sidewall
• Stops bead leaks and pinhole leaks
in rims
TOOLS • Will not solidify or freeze (above -33°F)
• Will not rust steel, corrode aluminum 53-0860
wheels or clog valve core 53-0850
SHOP • Completely environmentally friendly 53-0848
SUPPLIES and water washable
• Works for the life of the tire
Case
DISPLAY
& PROMO
Description Qty. P/N Retail
16 oz. Bottle 24 53-0848 $8.95
32 oz. Bottle 12 53-0850 15.95
CROSS 1 Gal. 4 53-0849 49.95
REFERENCE 5 Gal. Pail 53-0855 299.95
5 Gal. Pump 53-0860 150.95
966 55 Gal. Drum
1 Drop ship only.
53-08561 3675.95
53-0849 53-0855
OFFROAD • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & STREET CATALOGS
OFFROAD
TOOLS
WHEEL WEIGHTS & TOOLS
EXHAUST
TIRES &
WHEELS
CONTROL
O.E.M. STYLE
WHEEL BALANCE WEIGHTS SEATS &
15-1592 Description Color P/N Retail
GRAPHICS
Adhesive Tape Style
15-1593 • Lead alloy weights are marked in MOTION PRO®
1/4 oz. increments.
STEEL WHEEL WEIGHTS BODY
BikeMaster® Six 3 oz. Strips Silver 41-0434 $27.95
• Adhesive holds weight securely on
Six 3 oz. Strips Black 41-0462 27.95
WHEEL WEIGHTS Six 3 oz. Strips Chrome 41-0463 45.95
spoked or cast wheels
• Accurate and durable with super • Powder-coated protective finish will not
Adhesive Shop Pack PIT BIKE
strength adhesive for rust
a secure and long lasting balance job Pack of 360 Silver 15-0040 $126.99
• 1/4 oz. (7 g) segments
Description P/N Retail Pack of 360 Black 15-0041 126.99
• 18 oz. card contains 6 strips with 12
2.5g /60-pieces 15-1592 $6.95 Pack of 360 Chrome 15-0042 210.99
segments per strip (72 total segments) ENGINE
5g /60-pieces 15-1593 7.95 • 90 oz. box contains 30 strips with 12
segments per strip (360 total segments)
• Ideal size for motorcycle use
• Environmentally safe FUEL & AIR
Description P/N Retail
Silver 18 oz. 15-8454 $10.95
Silver 90 oz. 15-8452 37.95 DRIVE
Black 18 oz. 15-8455 10.95
Black 90 oz. 15-8453 37.95
BRAKE
BARNETT WHEEL
BALANCING WEIGHTS MOTION PRO®
• Crimp on ADHESIVE WHEEL WEIGHTS SUSPENSION
• Factory style weights with .270” • 6, 3 oz. strips pre-cut in 1/4 oz. (7 K&L
diameter nipple hole gram) increments of 1/2” width
• Polished and chrome-plated • Ideal for racing or offroad use UNIVERSAL ANGLED
Description P/N Retail • Special adhesive holds weight securely SPOKE WHEEL WEIGHTS ELECTRICAL
1/4 oz. (10) 49-8014 $25.30 to the rim Description P/N Retail
1/2 oz. (10) 49-8000 25.30 Description P/N Retail 10 grams 29-3022 $17.49
3/4 oz. (10) 49-8001 25.30 Card of 6 strips 15-0455 $13.95 20 grams 29-3023 18.69 CHEMICAL
1 oz. (10) 49-8002 25.30 Box of 30 strips 15-0456 62.95 30 grams 29-3024 20.79
SECURITY &
TIEDOWNS
TRAILER &
STANDS
TOOLS
SHOP
SUPPLIES
K&L
K&L SPOKE WHEEL WEIGHT DISPLAY
SPOKE WHEEL WEIGHT REMOVER TOOL K&L & PROMO
HAMMER • Designed to allow the tech to place the WHEEL WEIGHT SCRAPER
• Special hammer for reaching behind split tang of the tool between the rim • Easily removes most stick-on type wheel CROSS
the disc rotor when installing or and the weight and tap it off the nipple weights REFERENCE
removing spoke type wheel weights with the Wheel Weight Hammer • Sold in pack of 3
• Patent pending • Patent pending 29-2293 $1.99 967
29-2295 $12.99 29-2296 $15.99
EXHAUST
TIRES &
WHEELS
BikeMaster® BikeMaster®
CONTROL DIGITAL TIRE GAUGE DIAL GAUGE
• Range from 0-100 psi • Swivel angle chuck with air release valve
• One button operation Description P/N Retail
• Easy to read 0-15 psi in 1/4 lb. Increments 15-1505 $14.95
SEATS & 0-60 psi in 1 lb. Increments 15-1506 12.95
• Digital accuracy
GRAPHICS
• Automatic shut-off after 15 seconds
• Includes battery
15-1502 $17.95
BODY
PIT BIKE
BRAKE
SUSPENSION
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
AUTOMETER® TIRE GAUGE ACCUGAGE WITH HOSE ACCUGAGE
• 0-60 psi with peak hold
42-1034 $33.95
• Accurate stop, hand pressure reading
• Push-button valve bleeds off excess
LOW-PRESSURE BODY
pressure SX SERIES
• Flexible 14” hose • Stop hand/bleeder valve assembly
• Brass right angle chuck • Swivel angle chuck
• Ideal for ATV tires and forks PIT BIKE
Description P/N Retail
3-60 psi in 1 lb. incr. 15-0255 $21.99 Description P/N Retail
1-15 psi in 1/4 lb. incr. 15-0254 24.99 1-15 psi in 1/4 lb. incr. 15-0251 $18.99
ENGINE
DRIVE
BRAKE
ACCUGAGE ACCUGAGE BikeMaster®
STANDARD RUBBER SHOCK PEN TYPE TIRE GAUGE
• Graduated 0-20 psi in 1/2 lb. increments SUSPENSION
• Precision tire gauge with swivel chuck
Description P/N Retail
ABSORBER COVER • Chrome-painted brass body
• Protects Accugage head from damage • Easy to read
3-60 psi in 1 lb. incr. 15-0252 $11.99 • Fits all Accugages
1-15 psi in 1/4 lb. incr. 15-0253 14.99 • Pack of 3, retail priced individually
15-0256 $2.99 ELECTRICAL
15-1501 $6.95 ea.
CHEMICAL
SECURITY &
TIEDOWNS
TRAILER &
STANDS
TOOLS
969
EXHAUST
TIRES &
WHEELS
CONTROL
MOTION PRO® MOTION PRO®
T-6 CHAIN TOOL CHAIN RIVETING TOOL
MOTION PRO® • For breaking 520-530 chain and • Designed to rivet chain links to form
JUMBO CHAIN TOOL KIT pressing on and off 520 and some an endless chain such as cam and
SEATS & drive chains
GRAPHICS • Designed to break roller chain up to 525 master-link side-plates
• Lightweight, 6 oz. including press plates • May also be used to push pins out for
630 (Fits all standard and O-ring chain breaking chains.
sizes 520, 525, 530 and 630 and handle (8 oz. with pouch)
• Handle detaches for easy storage Description P/N Retail
BODY • Designed to rivet chain up to 530 (not 630) Chain riveting tool 15-0122 $101.95
• Masterlink sideplate press kit included • To reduce weight further, an MP Tool,
8mm combination wrench or 8mm socket 2mm repl. pin 15-8059 6.95
to press on sideplates on chains up to 3mm repl. pin 15-8060 6.95
530 (not 630) with extension can be used as a handle 4mm repl. pin 15-8061 6.95
PIT BIKE • Screws and attachments are made from • Custom pouch with individual storage Repl. rivet tip 15-8062 6.95
86L20 steel and then heat-treated for locations including a pocket for extra Press Plates 15-0123 20.95
strength and durability chain/master links and a large Use with P/N 15-0122
• Extractor pin is firmly guided by a accessory pocket
ENGINE removable guide, ensuring long pin life • This tool does not rivet master-link
• May be bolted to a work bench, 15-8358 $74.95
supported in a vise or held by handle
• When bolted to a solid surface, air or
FUEL & AIR electric wrenches may be used to break
chain
• Recommended for heavy-duty use
DRIVE
• Made in USA MOTION PRO®
15-8135 $146.95 MOTION PRO® CHAIN BREAKER PRESS
Replacement Pin
15-8235 $10.95 MINI CHAIN PRESS TOOL AND RIVETING TOOL
• Tool box size for pressing on press-fit • Complete chain tool for most 520, 525,
BRAKE 530 standard and o-ring chains
side plates
• Fits all 520-530 chain • Break, press and rivet your chain with
• Includes hex key wrench one compact tool
06-8070 $17.95 • Will rivet hollow nose master links
SUSPENSION (will not rivet solid soft-nose pins)
• Will push pin completely through
MOTION PRO® link/side plate
• Hardened body, riveting tip and
ELECTRICAL MOTION PRO® QUAD STAKE breaker pin for strength and durability
CHAIN CUTTING BOARD CHAIN RIVET KIT • Removable handle for compact storage
• Size chains to length quickly, easily • Use in conjunction with Jumbo Chain • Perfect for your trail/road tool pack if
and accurately you have a chain with a rivet
CHEMICAL Tool P/N 15-8135 master link
• No more improperly cut chains due to • Sold separately from P/N 15-8135
miscounted links • 1-year limited manufacturer’s warranty
15-8142 $19.95 15-8467 $72.95
• Easy to read link counting system
SECURITY & • Works on 40 and 50 series chains
TIEDOWNS
• Made in the U.S.A.
15-8271 $72.99
TRAILER & 15-0123
STANDS
15-8066 15-8403
TOOLS
REGINA ASSEMBLY MOTION PRO®
AND RIVET TOOL CHAIN PRESS TOOL
SHOP • Compact design handles assembly and • Used to press side plates on all
SUPPLIES riveting 520-530 chain
RK CHAIN • 2-sided carrier presses on large and • Can be used on O-ring chains
DISPLAY
CUTTER AND small sized plates
• Punch design rivets pin ends to match
• Designed to install press fit
connecting links
& PROMO PRESS FIT RIVET TOOL the rest of the chain for a factory look • Conversion kit converts #15-8066
• Cuts chain to length • Heat-treated for strength and durability press tool kit into chain breaker and
• Press fits side plates to proper depth • Fits 520, 525 and 530 chains riveting tool for 520, 525 and 530 chain
CROSS • Either clip or rivet type • Makes installing tight tolerances, press
REFERENCE • Flares holes in pins on rivet links Description P/N Retail
fit O and Z ring chains with rivet style Fits 530 Chain 15-8066 $56.95
Description P/N Retail connecting links a breeze Press Plates Only 15-0123 20.95
970 Cutter Rivet Tool 60-1216 $161.95 • Made in Italy Chain Breaker Riveting
Flare Pin 60-1217 12.95 18-8427 $136.95 Conversion Kit for 15-8066 15-8403 19.95
OFFROAD • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & STREET CATALOGS
OFFROAD
TOOLS
CHAIN REPAIR TOOLS
EXHAUST
TIRES &
WHEELS
BikeMaster®
CHAIN BREAKER 420-630 BikeMaster® CONTROL
BikeMaster® • Fits chains from 420 through 630 CHAIN BREAKER
• Comes with standard 3.5mm and • Heat treated
CHAIN BREAKER 4.5mm super hardened pins • For #25 to #60 chains
• Fits all sizes • Cut your own chain for the perfect length SEATS &
• Replacement tip included GRAPHICS
• Bullet proof forged steel design • Folding handle makes for a compact Description P/N Retail
• Cut your own chain for the perfect length design Chain Breaker 15-1523 $20.95
15-1560 $25.95 • Perfect for the tool box or fanny pack Replacement Tip 15-1524 4.95
15-1611 $32.95 BODY
PIT BIKE
BikeMaster®
CHAIN BREAKER TIP
D.I.D. • Replacement tip for 15-1560 ENGINE
• Keep one handy
CHAIN CUT & RIVET TOOL 15-1561 $4.95
• Combination chain cutter and riveting
tool built into one FUEL & AIR
• Eliminates the problems of over
riveting or riveting pinheads off center
• The body strength is over 10 times
stronger than the previous model DRIVE
• One third the size and about half the
weight of the previous model BikeMaster®
Description P/N Retail
PATTON CHAIN BREAKERS HEAVY-DUTY CHAIN BRAKE
Chain Cut/Rivet Tool 12-1292 $230.95
Replacement Pin 12-1293 28.95 • Heat-treated BREAKER & RIVET TOOL
• For #25-#60 chain • Milled from a solid billet steel
• Made in the USA • Complete with all 3 tips SUSPENSION
Description P/N Retail 15-1555 $126.95
Chain breaker 15-0113 $22.99
Replacement tip 15-0115 2.69
ELECTRICAL
CHEMICAL
MOTION PRO®
CHAIN ALIGNMENT TOOL
• Allows visual alignment of sprocket for SECURITY &
BikeMaster® accurate alignment of drive chain and TIEDOWNS
CHAIN PRESS TOOL rear wheel
• Hardened steel 15-0125 $27.95
TRAILER &
• Super compact STANDS
• Rounded corners to avoid injury
• For trail pack or on road tool kit,
perfect size
D.I.D KM501E • Sturdy enough for shop use TOOLS
SPORT CUTTING 15-1556 $15.95
& RIVETING TOOL MOTION PRO® SHOP
• Easy to use with step-by-step instructions CHAIN BREAKER SUPPLIES
• This compact tool is designed to rivet • Heat-treated chrome moly body
D.I.D ZJ rivet style links and to cut and • (4”) with folding handle for easy storage
press side plates onto rivet or clip style MOTION PRO® • Fits chain sizes 420, 428, 520, 530, DISPLAY
connecting links & PROMO
• All steel construction is incredibly MASTERLINK PLIERS and some 630
• Will push link pin completely through link
durable for maximum long life • Simplify installation and removal of
• Designed to be used for D.I.D 520, clip-type masterlinks • Replaceable pin is heat treated and CROSS
525, 530 and 532 size chains • One tip is shorter and notched to be hardened for long life REFERENCE
• A handy denim pouch is included placed on the pin while the other is Description P/N Retail
for storage longer to easily push the clip Chain Breaker 15-0420 $32.95 971
12-0305 $130.33 15-8230 $28.95 Replacement tip 15-0421 3.95
EXHAUST
TIRES &
WHEELS
CONTROL
SEATS &
GRAPHICS
MSR® TWISTING PLIERS BikeMaster®
BODY
• Make quick, clean, professional safety
wire twists
SAFETY WIRE PLIERS
• Jaws lock on wire for positive grip WITH 25’ STAINLESS WIRE BikeMaster®
• Just pull and they twist automatically • Forged steel pliers, shot peened and
ground clamping surfaces
LARGE SAFETY WIRE
PIT BIKE • Includes 25 ft. of safety wire • Heavy duty spring and chromed PLIERS
34-0488 $31.95 retainer slide • 9” pliers with 25’ wire
• Superior clamping force, for one time • A longer version of our standard pliers
set up and no wire slippage • Allows quicker braiding of larger jobs
ENGINE • Quick twist helix • Forged steel, shot peened, ground
• Spring loaded return clamping surfaces
• Ball bearing puller for easier operation • Heavy-duty spring, chromed slider,
• Cool candy apple red rust resistant spring loaded return
FUEL & AIR • Ball bearing puller, quick-twist helix,
finish
• Complete with tempered wire for secure superior clamping
fastening • Candy apple red for a great rust-resistant
DRIVE 15-1554 $30.95 look
MSR® • Comes complete with wire
15-1568 $49.95
SAFETY WIRE
• Aircraft grade 0.032”
BRAKE
diameter wire
• Used by military, aircraft, and
motorsports mechanics
SUSPENSION • 304 stainless will never rust
• 1 lb. can
34-0489 $26.95
ELECTRICAL
15-1566 15-1565
CHEMICAL
BikeMaster®
BikeMaster® SAFETY WIRE DRILL GUIDE
SAFETY WIRE 0.032” • It’s one thing to have safety wire and
SECURITY & • Our own specially tempered stainless pliers... Another to drill that 1/8” hole
TIEDOWNS steel safety wire • This is the perfect way to avoid drill bit
• Stiffer than the “full soft” annealed temper breakage
of other manufacturers • Perfectly align, guide, and support
TRAILER & • Holds shape better those tiny drill bits across the corners of
STANDS nuts and bolts
• Resists sheering better
• Superior 300 series stainless steel 15-1650 $54.95
Size P/N Retail
TOOLS 1/4 lb. reel 15-1566 $11.95
1 lb. can 15-1565 25.95
07-0631
SHOP
SUPPLIES
SAFETY WIRE KIT
• Used to safely wire nuts and bolts
DISPLAY • Comes complete with winder tool, wire, HELIX®
& PROMO 25 ft. of .032 stainless steel safety wire RACING SAFETY HELIX®
and lock washers WIRE STAINLESS STEEL
Description P/N Retail
CROSS • 90 feet CABLE TIES
REFERENCE Complete Kit (Starter Kit) 07-0631 $20.95 • 1/4 lb. spool • Sold in packages of 5
Replacement Parts • Stainless Steel Size P/N Retail
972 Safety Wire (RL/25ft.)
Wapid Winder
07-0632
07-0637
$8.95
10.95
• .032” diameter
53-0671 $11.81
8” 53-0776 $11.51
14” 53-0775 13.96
OFFROAD • TUCKER ROCKY DISTRIBUTING
TOOLS NEW PART NUMBERS ARE RED • ALSO SEE OUR 2010 APPAREL & STREET CATALOGS