Professional Documents
Culture Documents
6) What is the difference between open a Part Body through Mechanical + Part
Design? Mechanical Design + Sketch?
In open through Part Body through Mechanical + Part Design, Sketch Icon
is not activated directly.
In Mechanical Design + Sketch, even though this process opens part
model workbench the sketch icon is activated.
8) Write down the procedure of display the grid? In which window can we display
grid?
The grid is active in 2-windows one is Sketcher and other is drafting.
In sketcher the option is available in
TOOLS+OPTIONS+MECHANICAL DESIGN+SKETCHER+SKETCH
--- DISPLAY GRID CHECKBOX IS available.
12) What is the difference between profile and double click on line?
Profile is combined commands of line and arcs, where as double click is to edit.
13) What is the difference between circle and circle using co-ordinates?
Circle associated with dims, and circle using co-ordinates is positioning at reqd. co-
ordinates
14) What is the main Adv. Of creating equi. Distance points in curves?
Equal intervals can be obtained in single shot.
29) Is it possible to Pad a single profile among a more than one profile which are
intersected to each other? Why or How?
Yes, use goto profile.
45) Is it possible to create Profile and Guide curve on same sketch plane?
No
46) What is the creation and selection procedure of a option four guide curve in conic
type?
On selecting right MB in conic option menu or by creating 2d lines or wireframe lines
53) What we assemble with different parts, Let us assume that we have assemble
with a wrong part. Now is it possible to replace it? How?
Yes, by right click on part in specification tree, we can get replace with option.
54) What are the reasons for failure of perfect Loft?
1. twisting of guide curve, 2. open profile
64) Can we retrieve more than one part at a time in bottom up assembly?
Yes
65) List out the procedure for creation of frame and Title block?
68) Which view we are prefer to create first after creating empty sheet?
82) What is the difference between creating a cosmetic thread hole and Thread/Tap
option?
90) Is it possible to rectangle pattern with an angle 30° with reference to give
direction?
93) In which view will take the planes default after the part design?
96) How to create Icon for command by using Tool Bar only?
97) How to create tool bar with new Icon of the command?
102) Write down the procedure to recall the missing tool bar?
106) How many degrees of freedom are available for part of a Assembly?
Explain it?
107) Can we save the different parts with different files names which are
created in Assembly?
113) Is it possible to arrest all degrees of freedom in all instances using pattern?