Professional Documents
Culture Documents
Issue 1.5
2 Contents
Troubleshooting 175
Index 192
Get started
10 End/Power key
11 Keyboard
Learn how to start using your device.
12 Flashlight key
Keys and parts
1 Ear piece
2 Display 13 Micro USB connector
3 Left and right selection keys 14 Camera flash/Flashlight
4 Home key 15 Volume key
5 Call key 16 Camera lens
6 Navi™ key (scroll key). Also used to 17 Release buttons for back cover
zoom and capture images when 18 Charger connector
using the camera. 19 Headset connector
7 Microphone 20 Loudspeaker
8 Light sensor 21 Wrist strap hole
9 Messaging key
1 Function key
2 Shift key Safe removal. Always switch the device
off and disconnect the charger before
3 Sym key
removing the battery.
4 Backspace key
5 Enter key 1 Remove the back cover.
6 Ctrl/Mute key
Wrist strap
Thread the wrist strap, and tighten it.
3 When the device indicates a full 2 If the device is switched on, select
charge, disconnect the charger from from the available USB modes.
the device, then from the wall
outlet. Lock or unlock the keyboard
You do not need to charge the battery Lock the keyboard
for a specific length of time, and you can In the home screen, select Menu, and
use the device while it is charging. If the quickly press the right selection key.
battery is completely discharged, it may
take several minutes before the Set the keyboard to lock
charging indicator appears on the automatically after a defined length
display or before any calls can be made. of time
Select Menu > Ctrl. panel > Settings
Charging with the USB data cable and General > Security > Phone and
Charging with the USB data cable is SIM card > Keypad autolock
slower than charging with the charger. period > User defined, and select the
Charging with the USB data cable may desired length of time.
not work if you use a USB hub. USB hubs
may be incompatible for charging a USB Unlock the keyboard
device. Select Unlock > OK.
When the USB data cable is connected,
you can transfer data at the same time When the device or keypad is locked,
as charging. calls may be possible to the official
emergency number programmed into
1 Connect a compatible USB device to your device.
your device using a compatible USB
data cable. Connect a compatible headset
Depending on the type of the device Do not connect products that create an
that is used for charging, it may take output signal as this may cause damage
a while for charging to start. to the device. Do not connect any
Antenna locations
Your device may have internal and
external antennas. Avoid touching the
antenna area unnecessarily while the
antenna is transmitting or receiving.
Contact with antennas affects the
communication quality and may cause You can use Switch in your new device
a higher power level during operation without a SIM card.
and may reduce the battery life.
Copy content from your old device
You can use the Switch application to
copy content such as phone numbers,
addresses, calendar items, and images
from your previous compatible Nokia
device to your new device.
Nokia Switch
About Switch
device, select Menu > Ctrl. The type of content that can be
panel > Switch. transferred depends on the model of the
2 Pair the two devices. To have your device from which you want to transfer
device search for devices with content. If that device supports
Bluetooth connectivity, select synchronisation, you can also
Continue. Select the device from synchronise data between the devices.
which you want to transfer content. Your device notifies you if the other
You are asked to enter a code on device is not compatible.
your device. Enter a code (1-16
digits), and select OK. Enter the Synchronise, retrieve, or send
same code on the other device, and content
select OK. The devices are now Select Menu > Ctrl. panel > Switch.
paired.
After the first transfer, select from the
If your old Nokia device does not
following to start a new transfer,
have the Switch application, your
depending on the model:
new device sends it in a message.
Open the message in the old device, to synchronise content
and follow the instructions on the between your device and the
display. other device, if the other device
3 On your device, select the content supports synchronisation. The
you want to transfer from the other synchronisation is two-way. If
device. an item is deleted in one device,
When the transfer has started, you it is deleted in both. You cannot
can cancel it and continue later. restore deleted items with
synchronisation.
Content is transferred from the memory to retrieve content from the
of the other device to the corresponding other device to your device.
location in your device. The transfer With retrieval, content is
time depends on the amount of data to transferred from the other
be transferred. device to your device. You may
be asked to keep or delete the
The available services may also vary by against unauthorised use. The PIN code
country or region, and not all languages (4 - 8 digits) is usually supplied with the
are supported. SIM card. After three consecutive
incorrect PIN code entries, the code is
To access Nokia's Ovi services, go to blocked, and you need the PUK code to
www.ovi.com, and register your own unblock it.
Nokia account.
UPIN code — This code may be supplied
For more help and information, go to with the USIM card. The USIM card is an
www.ovi.com. enhanced version of the SIM card and is
supported by 3G mobile phones.
About Ovi Store PIN2 code — This code (4 - 8 digits) is
In Ovi Store, you can download supplied with some SIM cards, and is
mobile games, applications, videos, required to access some functions in
images, themes, and ringing tones to your device.
your device. Some items are free of Lock code (also known as security
charge; others you need to pay for with code) — The lock code helps you to
your credit card or in your phone bill. protect your device against
The availability of payment methods unauthorised use. The preset code is
depends on your country of residence 12345. You can create and change the
and your network service provider. Ovi code, and set the device to request the
Store offers content that is compatible code. Keep the new code secret and in a
with your mobile device and relevant to safe place separate from your device. If
your tastes and location. you forget the code and your device is
locked, your device will require service.
Access codes Additional charges may apply, and all
the personal data in your device may be
If you forget any of the access codes, deleted. For more information, contact
contact your service provider. a Nokia Care Point or your device dealer.
Personal Unblocking Key (PUK) code and
Personal identification number (PIN) PUK2 code — These codes (8 digits) are
code — This code protects your SIM card required to change a blocked PIN code
Basic use
To change the writing language, select This feature may not be available in
Options > Input options > Writing certain regions.
language.
Copy contacts
Select Menu > Contacts.
Contacts
When you open the contacts list for the
Stay connected with your online first time, the device asks if you want to
friends copy names and numbers from the SIM
card to your device.
You can synchronise the contact
information on your device with Start copying
contacts you have on Facebook. When
you allow synchronisation, you are able Select OK.
to view your contacts' Facebook profile Cancel copying
information, such as their picture and
status updates, in the Contacts Select Cancel.
application on your device. The device asks if you want to view the
SIM card contacts in the contacts list. To
Synchronising your contacts and view the contacts, select OK. The
retrieving status updates are network contacts list opens, and the names
services. Roaming and data transfer stored on your SIM card are indicated
charges may apply. If the social with .
networking service is not available or
functioning correctly, you may not be
able to synchronise or retrieve status Manage names and numbers
updates. Select Menu > Contacts.
Synchronise your contacts Delete a contact
Open the social networking service Go to a contact, and select Options >
application, and follow the instructions. Delete.
To define the call text for a contact, In the month view, calendar entries are
select the contact and Options > View marked with a triangle. Anniversary
details > Options > Add text for call. entries are also marked with an
Enter the call text, and select OK. exclamation mark. The entries of the
selected day are displayed as a list.
Tip: To define the time period after according to the selected location.
which the alarm sounds again when you Ensure that the time is correct and
set it to snooze, select Options > matches your time zone.
Settings > Alarm snooze time.
To change the time, date, and clock type To change the time or date, select
settings, select Options > Settings. Time or Date.
To automatically update the time, date, To change the clock shown on the home
and time zone information to your screen, select Clock type > Analogue
device (network service), select or Digital.
Options > Settings > Automatic time
update > On. To allow the mobile phone network to
update the time, date, and time zone
information to your device (network
World clock service), select Automatic time
Select Menu > Applications > Clock. update > On.
To view the time in different locations, To change the alarm tone, select Clock
open the world clock tab. To add alarm tone.
locations to the list, select Options >
Add location. You can add a maximum
of 15 locations to the list. Multitasking
To set your current location, scroll to a You can have several applications open
location, and select Options > Set as at the same time. To switch between
current location. The location is active applications, press and hold the
displayed in the clock main view, and home key, scroll to an application, and
the time in your device is changed
To call your voice mailbox, scroll to cannot answer the call. Select
Voice mailbox, and select Options > Options > Send message.
Call voice mailbox.
To activate or deactivate rejecting calls
To call your mailbox in the home screen, with a text message, select Menu >
press and hold 1; or press 1 and then the Ctrl. panel > Settings and Phone >
call key. Select the mailbox you want to Call > Reject call with message. To
call. edit the content of the message sent to
the caller, select Message text.
To change the mailbox number, select
the mailbox and Options > Change
Make a conference call
number.
1 Make a call to the first participant.
2 To make a call to another
Answer or decline a call participant, select Options > New
call. The first call is put on hold.
To answer the call, press the call key.
3 When the new call is answered, to
join the first participant in the
To mute the ringing tone of an incoming
conference call, select Options >
call, select Silence.
Conference.
If you do not want to answer a call, press
To add a new person to the call,
the end key. If you activate the Call
repeat step 2, and select Options >
divert > Voice calls > If busy function
Conference > Add to conference.
in phone settings to divert calls,
declining an incoming call also diverts Your device supports conference
the call. calls between a maximum of six
participants, including yourself.
When you select Silence to mute the
ringing tone of an incoming call, you can To have a private conversation with
send a text message without rejecting one of the participants, select
the call, informing the caller that you Options > Conference > Private.
service). To modify the settings, you To change the password used for
need the barring password from your barring voice, fax, and data calls, select
service provider. Call barring affects all Options > Edit barring password.
call types. Enter the current code, then the new
code twice. The barring password must
Select from the following voice call be four digits long. For details, contact
barring settings: your service provider.
Outgoing calls — Prevent making
voice calls with your device.
Incoming calls — Prevent incoming Voice dialling
calls. Your device supports enhanced voice
International calls — Prevent calling commands. Enhanced voice commands
to foreign countries or regions. are not dependent on the speaker’s
voice, so you do not need to record voice
Incoming calls when roaming tags in advance. The device creates a
— Prevent incoming calls when outside voice tag for the entries in the contacts,
your home country. and compares the spoken voice tag to it.
International calls except to home The voice recognition in the device
country — Prevent calls to foreign adapts to the main user’s voice to
countries or regions, but allow calls to recognise the voice commands better.
your home country.
The voice tag for a contact is the name
To check the status of voice call barrings, that is saved for the contact.
select the barring option and To listen to the synthesised voice tag,
Options > Check status. select a contact and Options > View
details > Options > Voice tag
To deactivate all voice call barrings, details > Options > Play voice tag.
select a barring option and Options >
Deactivate all barrings.
during an emergency, so you should not telephone number type, such as mobile
rely solely upon voice dialling in all or home.
circumstances.
Make a video call
Make a call with a voice tag When you make a video call (network
When you use voice dialling, the service), you can see a real-time, two-
loudspeaker is in use. Hold the device at way video between you and the
a short distance away when you say the recipient of the call. The live video
voice tag. image, or video image captured by the
camera in your device is shown to the
1 To start voice dialling, in the home video call recipient.
screen, press and hold the right
selection key. If a compatible To be able to make a video call, you must
headset with the headset key is have a USIM card and be in the coverage
attached, press and hold the of a 3G network. For availability of and
headset key to start voice dialling. subscription to video call services,
2 A short tone sounds, and Speak contact your network service provider.
now is displayed. Say clearly the
name that is saved for the contact. A video call can only be made between
two parties. The video call can be made
3 The device plays a synthesised voice
to a compatible mobile device or an
tag for the recognised contact, and
ISDN client. Video calls cannot be made
displays the name and number. If
while another voice, video, or data call
you do not want to call that contact,
is active.
select another contact from the list
of matches within 2.5 seconds, or, Icons
to cancel, select Quit.
You are not receiving video (the
If several numbers are saved for a name,
recipient is not sending video or
the device selects the default number, if
the network is not transmitting
defined. Otherwise, the device selects
it).
the first available number in a contact
card. You can also say the name and
You have denied video sending hear the sound and may see a still
from your device. To send a still image or a grey background
image instead, select Menu > graphic.
Ctrl. panel > Settings and 3 To end the video call, press the end
Phone > Call > Image in key.
video call.
During a video call
Even if you denied video
sending during a video call, the View live video or listen to the caller
call is still charged as a video only
call. Check the pricing with your Select Options > Enable or Disable
service provider. and the desired option.
1 To start a video call, enter the phone Mute or unmute the microphone
number in the standby mode, or
select Contacts and a contact. Select Mute or Unmute.
2 Select Options > Call > Video call.
Starting a video call may take a Activate the loudspeaker
while. Waiting for video image is Select Options > Activate
shown. If the call is not successful loudspeaker. If you have attached a
(for example, video calls are not compatible headset with Bluetooth
supported by the network, or the connectivity, to route the sound to the
receiving device is not compatible), headset, select Options > Activate
you are asked if you want to try a handsfree.
normal call or send a text or
multimedia message instead. Switch back to the handset
The video call is active when you see Select Options > Activate handset.
two video images, and hear the Take a snapshot of the video you are
sound through the loudspeaker. sending
The call recipient may deny video
sending ( ), in which case you only Select Options > Send snapshot.
Video sending is paused and the
snapshot is displayed to the recipient. To end the video call, press the end key.
The snapshot is not saved.
Zoom your image Video sharing
Select Options > Zoom. Use video sharing (network service) to
send live video or a video clip from your
Set the video quality
mobile device to another compatible
Select Options > Adjust > Video mobile device during a voice call.
preference > Normal quality, Clearer
detail, or Smoother motion. The loudspeaker is active when you
activate video sharing. If you do not
want to use the loudspeaker for the
Answer or decline a video call voice call while you share video, you can
When a video call arrives, is also use a compatible headset.
displayed.
Warning:
To answer the video call, press the call
Continuous exposure to high volume
key. Allow video image to be sent to
may damage your hearing. Listen to
caller? is displayed.
music at a moderate level, and do not
To start sending live video image, select hold the device near your ear when the
Yes. loudspeaker is in use.
To save the live video you shared, select Yes — Accept the invitation, and
Yes when prompted. The device notifies activate the sharing session.
you of the memory location of the saved No — Reject the invitation. The sender
video. To define the preferred memory receives a message that you rejected
location, select Menu > Ctrl. panel > the invitation. You can also press the
Settings and Connection > Video end key to reject the invitation and end
sharing > Preferred saving memory. the voice call.
If you access other applications while To mute the video on your device, select
you are sharing a video clip, the sharing Options > Mute.
is paused. To return to the video sharing
view, and to continue sharing, in the To play the video at the original volume,
home screen, select Options > Resume select Options > Original volume. This
video sharing. does not affect the audio playback of the
other party of the phone call.
Accept an invitation To end the sharing session, select Stop.
When someone sends you a video To end the voice call, press the end key.
sharing invitation, the invitation When you end the call, also video
message displays the sender’s name or sharing ends.
SIP address. If your device is not set to
silent, it rings when you receive an
invitation. Log
The log stores information about the
If someone sends you a share invitation communication history of the device.
and you are not within UMTS network The device registers missed and
coverage, you will not know that you received calls only if the network
received an invitation. supports these functions, the device is
switched on, and within the network
When you receive an invitation, select
service area.
from the following:
Tip: To open the dialled numbers list in You may be charged for your packet
the home screen, press the call key. data connections by the amount of data
sent and received.
To check the amount of data sent or
Select Options and from the following: received during packet data
Save to Contacts — Save a phone connections, select Packet data > All
number from a recent calls list to your sent dataor All received data.
contacts.
Clear list — Clear the selected recent To clear both sent and received
calls list. information, select Options > Clear
counters. You need the lock code to
Delete — Clear an event in the selected
clear the information.
list.
Settings — Select Log duration and
the length of time that the Monitor all communication events
communication information is saved in Select Menu > Log.
the log. If you select No log, no
information is saved in the log. To open the general log where you can
monitor all voice calls, text messages, or
data and wireless LAN connections
The device may recognise the SIM card To request the network to send you a
provider and automatically configure delivery report of the text messages and
some of the message settings. If not, multimedia messages you have sent
you may need to define the settings (network service), select Options >
manually; or contact your service Settings > Text message > Receive
provider to configure the settings. report or Multimedia message >
Receive reports. The reports are saved
Messaging folders in the Reports folder.
Select Menu > Messaging.
Messages and data received using Organise messages
Bluetooth connectivity are stored in the Select Menu > Messaging and My
Inbox folder. E-mail messages are folders.
stored in the Mailbox folder. Messages
that you have been writing can be To create a new folder to organise your
stored in the Drafts folder. Messages messages, select Options > New
that are waiting to be sent are stored in folder.
the Outbox folder, and messages that
have been sent, excluding Bluetooth To rename a folder, select Options >
messages, are stored in the Sent folder. Rename folder. You can only rename
folders that you have created.
Tip: Messages are placed in the Outbox
folder, for example, when your device is
To move a message to another folder,
outside network coverage.
select the message, Options > Move to
folder, the folder, and OK.
Note: The message sent icon or
text on your device screen does not To sort messages in a specific order,
indicate that the message is received at select Options > Sort by.
the intended destination.
The available options may vary. To reply to the message sender, select
Options > Reply. To reply to the sender
Add attachments and all other recipients, select
Select Menu > Messaging. Options > Reply to all.
Select Go online > Options and from access Ovi on your PC, and sign in to your
the following: Nokia account.
Select — Select the item.
Change your profile image
Go online — Connect to the service if
Select Options > Edit image > Select
you are offline. existing image and the new image.
My profile — Edit your profile You can also edit or remove the current
information. profile image or capture a new one.
Recommend to friend — Invite a
contact to join Ovi Contacts. The Change your availability
invitation is sent as a text message. By default, your availability is set to
Settings — Modify the Ovi Contacts Available. To change your availability,
settings. select the icon.
The available options may vary. Tell your friends what you are doing
at the moment
Create and edit your profile Select What are you doing?, and enter
text in the field.
Edit your profile information
Show your friends what music you
Select My profile.
are currently listening to
View the profiles of your Ovi Contacts Select Now playing. To do this, you
friends must allow your now playing
Select a friend and Options > Profile. information to be shared in the
presence settings.
Your profile information is visible to Edit your contact information
your Ovi Contacts friends. Only the Select a field, and enter text.
following profile details are displayed
to other Ovi Contacts users, for example,
during a search: first name and last In the My profile view, select Options
name. To modify your privacy settings, and from the following:
location information, both the Maps and New landmark — To create a new
Positioning applications are needed. landmark of your current position,
select a location from a map, or enter
To receive any files, you or the recipient the details manually.
must accept the file. To cancel sending
or receiving while the file is being Ovi Contacts settings
transferred, select Cancel.
Select Options > Settings and from the
View the location of your friend following:
Select Show on map. Account — Access your account details,
and define your visibility to others in a
Return to the Ovi Contacts main view search.
without ending the chat Presence — Share your current
Select Back. location with your friends, and let them
see when you are making a phone call
Add, call, or copy phone numbers (call status).
from a chat
Personalisation — Modify the settings
Go to a phone number in a chat, and related to the startup and tones of the
select Options and the appropriate Ovi Contacts application, and set your
option. device to automatically accept friend
invitations.
Edit your landmarks Connection — Select the network
connection to use, and activate roaming
To edit your landmarks, in the
warnings.
Landmarks view, select Options and
from the following: Exit — End all active chats, and close
Mark/Unmark — Mark or unmark the application.
items on the list.
Nokia account settings
Edit — Edit the name and other
properties of the landmark. Select Options > Settings > Account.
current message or e-mail, scroll left. To To set the speaking volume, select
skip to the previous message, scroll left Volume.
at the beginning of the message.
To view the details of a voice, open the
To view the current message or e-mail voice tab, and select the voice and
in text format without the sound, select Options > Voice details. To listen to a
Options > View. voice, select the voice and Options >
Play voice.
Speech
To delete languages or voices, select the
Select Menu > Ctrl. panel > Speech. item and Options > Delete.
With Speech, you can set the language,
voice, and voice properties for the Text and multimedia messages
message reader. Select Menu > Messaging.
To set the language for the message Only devices that have compatible
reader, select Language. To download features can receive and display
additional languages to your device, multimedia messages. The appearance
select Options > Download of a message may vary depending on
languages. the receiving device.
When you download a new language,
you must download at least one voice A multimedia message (MMS) can
for that language. contain text and objects such as images,
sound clips, or video clips. Before you
To set the speaking voice, select Voice. can send or receive multimedia
The voice depends on the selected messages on your device, you must
language. define the multimedia message
settings. Your device may recognise the
To set the speaking rate, select Speed. SIM card provider and configure the
correct multimedia message settings
automatically. If not, contact your
service provider for the correct settings, requires a data connection, and
order the settings from your service continuous attempts to resend the e-
provider in a configuration message, or mail may increase your data transfer
use the Settings wizard application. costs. In the Outbox folder, you can
delete such a message, or move it to the
Write and send messages Drafts folder.
Select Menu > Messaging.
1 Select New message.
2 To send a text or multimedia
Important: Exercise caution message (MMS), select Message. To
when opening messages. Messages may send a multimedia message that
contain malicious software or includes one sound clip, select
otherwise be harmful to your device or Audio message. To send an e-mail,
PC. select E-mail.
3 In the To field, press the scroll key
Before you can create a multimedia to select recipients or groups from
message or write an e-mail, you must the contacts list, or enter the
have the correct connection settings in recipient’s phone number or e-mail
place. address. You can also copy and
paste the number or address from
The wireless network may limit the size
the clipboard.
of MMS messages. If the inserted picture
exceeds this limit, the device may make 4 In the subject field, enter the
it smaller so that it can be sent by MMS. subject of the message for a
multimedia or an e-mail message.
Check the size limit of e-mail messages To hide or display fields when
with your service provider. If you writing a text or multimedia
attempt to send an e-mail message that message, select Options >
exceeds the size limit of the e-mail Message header fields.
server, the message is left in the Outbox 5 In the message field, write the
folder, and the device attempts to message. To add a template or note
resend it periodically. Sending an e-mail to a text or multimedia message,
select Options > Insert content > The available options may vary.
Insert text > Template or Note.
To add a template to an e-mail
message, select Options > Insert Note: The message sent icon or
template. text on your device screen does not
6 To add a media file to a multimedia indicate that the message is received at
message, select Options > Insert the intended destination.
content, the file type or source, and Your device supports text messages
the desired file. To add a business beyond the limit for a single message.
card, slide, note, or other file to the Longer messages are sent as two or
message, select Options > Insert more messages. Your service provider
content > Insert other. may charge accordingly. Characters
7 To capture an image or record a with accents, other marks, or some
video or sound clip for a multimedia language options take more space, and
message, select Options > Insert limit the number of characters that can
content > Insert image > New, be sent in a single message.
Insert video clip > New, or Insert
sound clip > New. You may not be able to send video clips
8 To insert a smiley to a text or that are saved in the MP4 file format or
multimedia message, press the sym that exceed the size limit of the wireless
key, and select the smiley. network in a multimedia message.
9 To add an attachment to an e-mail, Text messages on the SIM card
select Options > Add
attachment, the memory, and the Select Menu > Messaging and
Options > SIM messages.
file to attach. indicates an e-mail
attachment. Text messages may be stored on your
10 To send the message, select SIM card. Before you can view SIM
Options > Send, or press the call messages, you must copy the messages
key. to a folder in the device. After copying
the messages to a folder, you can view
these numbers and addresses to make You can receive special messages that
calls, send messages, or create contain data, such as operator logos,
bookmarks, for example. ringing tones, bookmarks, or internet
access or e-mail account settings.
View and save multimedia To save the contents of these messages,
attachments select Options > Save object.
Cell broadcast messages cannot be Your device may recognise the SIM card
received in UMTS (3G) networks. provider and configure the correct text
network and other circumstances, this To select the languages in which you
information may not always be reliable. want to receive cell broadcast
messages, select Language.
Service message settings
Select Menu > Messaging and To display new topics in the cell
Options > Settings > Service broadcast topics list, select Topic
message. detection > On.
friends. You can access several chat Using the service or downloading
services or communities simultaneously content may cause transfer of large
and switch between them. If you want amounts of data, which may result in
to, for example, browse the web, you data traffic costs.
can leave the IM application to run in the
background, and still be notified of new Connectivity
instant messages.
Your device offers several options to
The IM application is preinstalled on connect to the internet or to another
your device. To start chatting, select compatible device or computer.
Menu > Internet > Chat.
Using network services and Data connections and access points
downloading content to your device Your device supports packet data
may result in data traffic costs. connections (network service), such as
GPRS in the GSM network. When you use
Set up Office Communicator your device in GSM and UMTS networks,
With the Office Communicator multiple data connections can be active
application, you can communicate with at the same time, and access points can
your colleagues and see their share a data connection. In the UMTS
availability. network, data connections remain
active during voice calls.
1 Select Menu > Office >
Communicator. You can also use a WLAN data
connection. Only one connection in one
2 Define the settings. wireless LAN can be active at a time, but
several applications can use the same
Some services may not be available in
internet access point.
all countries, and may be provided only
in selected languages. The services may To establish a data connection, an
be network dependent. For more access point is required. You can define
information, contact your network different kinds of access points, such as
service provider. the following:
• MMS access point to send and roaming costs, contact your network
receive multimedia messages service provider. This option is shown
• Internet access point (IAP) to send only if supported by the wireless service
and receive e-mail and connect to provider.
the internet
A roaming agreement is an agreement
Check the type of access point you need between two or more service providers
with your service provider for the to enable the users of one service
service you want to access. For provider to use the services of other
availability and subscription to packet service providers.
data connection services, contact your Operator selection — Select
service provider. Automatic to set the device to search
for and select one of the available
Network settings networks, or Manual to manually select
Your device can automatically switch the network from a list. If the
between GSM and 3G networks. The GSM connection to the manually selected
network is indicated with in the network is lost, the device sounds an
standby mode. The 3G network is error tone and asks you to reselect a
indicated with . network. The selected network must
have a roaming agreement with your
Select Menu > Ctrl. panel > Settings home cellular network.
and Phone > Network and from the Cell info display — Set the device to
following: indicate when it is used in a cellular
network based on microcellular
Network mode — Select which network (MCN) technology and to
network to use. If you select Dual activate cell info reception.
mode, the device uses the GSM or 3G
network automatically, according to the Wireless LAN
network parameters and the roaming Your device can detect and connect to
agreements between the wireless wireless local area networks (WLAN).
service providers. For details and Using a WLAN, you can connect your
Note: Using WLAN may be You can use WLAN during a voice call or
restricted in some countries. For when packet data is active. You can only
example, in France, you are only be connected to one WLAN access point
allowed to use WLAN indoors. For more device at a time, but several
information, contact your local applications can use the same internet
authorities. access point.
Features that use WLAN, or that are When the device is in the offline profile,
allowed to run in the background while you can still use WLAN (if available).
using other features, increase the Remember to comply with any
demand on battery power and reduce applicable safety requirements when
the battery life. establishing and using a WLAN
connection.
Use encryption to increase the security
of your WLAN connection. Using Tip: To check the unique media access
encryption reduces the risk of others control (MAC) address that identifies
accessing your data. your device, enter *#62209526# in the
home screen.
Bluetooth connectivity
Synchronisation About Bluetooth connectivity
With the Sync application, you can With Bluetooth connectivity, you can
synchronise your notes, messages, make a wireless connection to other
contacts, and other information with a compatible devices, such as mobile
remote server. phones, computers, headsets, and car
Select Menu > Ctrl. panel > kits.
Connectivity > Sync. You can use the connection to send
You may receive synchronisation images, video clips, music and sound
settings as a configuration message clips, and notes, transfer files from your
from your service provider. compatible PC, and print images with a
compatible printer.
A synchronisation profile contains the
necessary settings for synchronisation. Since devices with Bluetooth wireless
When you open the application, the technology communicate using radio
default or previously used waves, they do not need to be in direct
synchronisation profile is displayed. line-of-sight. However, they must be
within 10 metres (33 feet) of each other,
Include or exclude content types although the connection may be subject
Select a content type. to interference from obstructions such
as walls or from other electronic
Synchronise data devices.
Select Options > Synchronise.
helps to protect your device from 4 If the other device requires pairing
harmful content. Operating the device before data can be transmitted, a
in hidden mode is a safer way to avoid tone sounds, and you are asked to
malicious software. enter a passcode. The same
passcode must be entered in both
Send data using Bluetooth devices.
connectivity When the connection is established,
Several Bluetooth connections can be Sending data is displayed.
active at a time. For example, if you are
connected to a compatible headset, you Tip: When searching for devices, some
can also transfer files to another devices may show only the unique
compatible device at the same time. address (device address). To find the
unique address of your device, enter
1 Open the application where the *#2820#.
item you want to send is stored.
2 Scroll to an item, and select Pair devices
Options > Send > Via Bluetooth.
To pair with compatible devices and
Devices with Bluetooth wireless view your paired devices, in the main
technology that are within range view of Bluetooth connectivity, scroll
are displayed. Device icons are as right.
follows:
Unblock a device
When the remote SIM mode is on in your
On the Blocked devices tab, go to a device, Remote SIM mode is displayed
device, and select Options > Delete. in the standby mode. The connection to
Unblock all blocked devices the wireless network is turned off, as
indicated by in the signal strength
Select Options > Delete all.
indicator area, and you cannot use SIM
card services or features requiring
If you reject a pairing request from cellular network coverage.
another device, you are asked if you
want to block all future connection When the wireless device is in the
requests from this device. If you accept remote SIM mode, you can only use a
the query, the device is added to the list compatible connected enhancement,
of blocked devices. such as a car kit, to make or receive calls.
Your wireless device will not make any
Remote SIM mode calls while in this mode, except to the
emergency numbers programmed into
Before the remote SIM mode can be your device. To make calls from your
activated, the two devices must be device, you must leave the remote SIM
paired and the pairing initiated from
mode. If the device is locked, enter the connect the data cable, and select PC
lock code to unlock it. Suite as the USB connection mode.
To leave the remote SIM mode, press the To synchronise the music in your device
power key, and select Exit remote SIM with Nokia Ovi Player, install the Nokia
mode. Ovi Player software on your PC, connect
the data cable, and select PC Suite as the
USB connection mode.
Data cable
To avoid corrupting data, do not To change the USB mode you normally
disconnect the USB data cable during use with the data cable, select Menu >
data transfer. Ctrl. panel > Connectivity > USB and
USB connection mode, and the desired
Transfer data between your device option.
and a PC
1 Insert a memory card in your device, To set the device to ask for the mode
and connect the device to a each time you connect the data cable to
compatible PC with the data cable. the device, select Menu > Ctrl. panel >
2 When the device asks which mode Connectivity > USB and Ask on
to use, select Mass storage. In this connection > Yes.
mode, you can see your device as a
removable hard drive in your
PC connections
computer.
You can use your mobile device with a
3 End the connection from the
variety of compatible PC connectivity
computer (from the Unplug or Eject
and data communications applications.
Hardware wizard in Microsoft
With Nokia Ovi Suite you can, for
Windows, for example) to avoid
example, transfer files and images
damaging the memory card.
between your device and a compatible
computer.
To use Nokia Ovi Suite with your device,
install Nokia Ovi Suite on your PC,
Tip: To send the browser to the Full screen — View the web page in
background without exiting the full screen.
application or closing the connection, Page overview — Display an
press the end key once.
overview of the current web page.
Browser toolbar Search by keyword — Search the
The browser toolbar helps you select current web page.
frequently used functions of the Settings — Modify the web browser
browser. settings.
Open the toolbar Navigate pages
Press and hold the scroll key on a blank When you are browsing a large web
area of a web page. page, you can use Mini Map or Page
overview to view the page at one
Move within the toolbar
glance.
Scroll left or right.
Select Menu > Internet > Web.
Select a feature from the toolbar
Press the scroll key Activate the Mini Map
Select Options > Settings >
General > Mini map > On.
From the toolbar, select from the
following: When you scroll through a large web
page, the Mini Map opens and shows an
Go to web address — Enter a web overview of the page.
address.
Recently visited pages — View a Move on the Mini Map
list of the web addresses you visit Scroll left, right, up, or down. When you
frequently. find the desired location, stop scrolling.
Bookmarks — Open the bookmarks The Mini Map disappears and leaves you
view. at the selected location.
The security icon does not indicate that the current date and time in your device
the data transmission between the are correct.
gateway and the content server (where
the data is stored) is secure. The service Before changing any certificate settings,
provider secures the data transmission you must make sure that you really trust
between the gateway and the content the owner of the certificate and that the
server. certificate really belongs to the listed
owner.
Security certificates may be required for
some services, such as banking services. Web settings
You are notified if the identity of the Select Menu > Internet > Web and
server is not authentic or if you do not Options > Settings and from the
have the correct security certificate in following:
your device. For more information,
contact your service provider. General settings
Access point — Change the default
access point. Some or all access points
Important: Even if the use of
may be preset for your device by your
certificates makes the risks involved in service provider. You may not be able to
remote connections and software change, create, edit, or remove them.
installation considerably smaller, they
must be used correctly in order to Homepage — Define the homepage.
benefit from increased security. The Mini map — Turn Mini Map on or off.
existence of a certificate does not offer Mini Map helps with web page
any protection by itself; the certificate navigation.
manager must contain correct, History list — If you select On, while
authentic, or trusted certificates for browsing, to see a list of the pages you
increased security to be available. have visited during the current session,
Certificates have a restricted lifetime. If select Back.
"Expired certificate" or "Certificate not
valid yet" is shown, even if the Web address suffix — Enter a web
certificate should be valid, check that address suffix that the device uses by
default when you enter a web address Font size — Define the font size that is
in the Go to field (for example, .com used for web pages.
or .org).
Security warnings — Hide or show Privacy settings
security notifications. Recently visited pages — Enable or
Java/ECMA script — Enable or disable disable automatic bookmark collecting.
the use of scripts. If you want to continue saving the
addresses of the visited web pages into
Java/ECMA script errors — Select the Recently visited pages folder, but
whether you want to receive script hide the folder from the bookmarks
notifications. view, select Hide folder.
Page settings Form data saving — Select whether
you want the password data or data you
Load content — Select whether you
enter on different forms on a web page
want to load images and other objects
to be saved and used the next time you
while browsing. If you select Text
open the page.
only, to load images or objects later
during browsing, select Options > Cookies — Enable or disable the
Display options > Load images. receiving and sending of cookies.
Default encoding — If text characters Web feed settings
are not shown correctly, you can select
another encoding according to the Acc. point for auto-update — Select
language for the current page. the desired access point for updating.
This option is only available when
Block pop-ups — Allow or block Automatic updates is active.
automatic opening of different pop-ups
while browsing. Update when roaming — Select
whether you want the web feeds to be
Automatic reload — Select whether updated automatically when roaming.
you want the web pages to be refreshed
automatically while browsing.
With PDF reader, you can read PDF The maximum length of the header and
documents on the display of your footer is 128 characters.
device; search for text in the Preview — Preview the document
documents; modify settings, such as before printing.
zoom level and page views; and send
PDF files using e-mail. Printing options
Printing Open a document, such as a file or
message, and select Options >
You can print documents, such as files,
Printing options > Print.
messages, images, or web pages, from
your device. You may not be able to print Define the following options:
all types of documents.
Printer — Select an available printer
File printing from the list.
Print files Print — Select All pages, Even pages,
or Odd pages as the print range.
Select Menu > Ctrl. panel >
Connectivity > Printers. Print range — Select All pages in
range, Current page, or Defined
Before printing, ensure that all the pages as the page range.
necessary configurations have been Number of copies — Select the
done to connect your device to the number of copies to print.
printer.
Print to file — Select to print to a file
Select Options > Printing options and and determine the location for the file.
from the following:
The available options may vary.
Print — Print a document. To print to a
file, select Print to file, and define the Printer settings
location for the file.
Select Menu > Ctrl. panel >
Page setup — You can change the Connectivity > Printers.
paper size and orientation, define the
margins, and insert a header or a footer.
To add a new printer, select Options > To print images in Photos, camera, or
Add. image viewer, mark the images, and
select Options > Print.
Define the following:
Printer — Enter a name for the printer. Connect to printer
Driver — Select a driver for the printer. Connect your device to a compatible
Bearer — Select a bearer for the printer with a compatible data cable,
printer. and select Image transfer as the USB
connection mode.
Access point — Select the access point.
Port — Select the port. To set your device to ask the purpose of
Host — Define the host. the connection each time the cable is
User — Enter the user. connected, select Menu > Ctrl. panel
and Connectivity > USB > Ask on
Queue — Enter the print queue. connection > Yes.
Orientation — Select the orientation.
Paper size — Select the paper size.
Print preview
Media type — Select the media type.
After you select the printer, the selected
Colour mode — Select the colour images are displayed using predefined
mode. layouts.
Printer model — Select the printer
model. If the images do not fit on a single page,
scroll up or down to display the
The available options may vary. additional pages.
Image print
You can print images from your device Image print view
using a printer compatible with After you select the images to print and
PictBridge. You can only print images the printer, define the printer settings.
that are in the JPEG file format.
Select from the following: dictionary. You can have two additional
Layout — Select the layout for the languages installed, besides English.
images. Speech — Edit the voice feature
Paper size — Select the paper size. settings. You can adjust the speed and
volume of the voice.
Print quality — Select the print quality.
Notes
Dictionary
Select Menu > Office > Notes.
You can translate words from one
language to another. Not all languages You can create and send notes to other
may be supported. compatible devices, and save received
plain text files (TXT file format) to Notes.
Look up a word to translate
1 Select Menu > Office > To write a note, start entering the text.
Dictionary. The note editor opens automatically.
2 Enter text in the search field. As you
enter text, suggestions of words to To open a note, select Options >
translate are displayed. Open.
3 Select the word from the list.
To send a note to other compatible
Select Options and from the following: devices, select Options > Send.
Listen — Listen to the selected word.
To synchronise or to define
History — Find previously translated synchronisation settings for a note,
words from the current session. select Options > Synchronisation.
Languages — Change the source or Select Start to initialise synchronisation
target language, download languages or Settings to define the
from the internet, or remove a language synchronisation settings for the note.
from the dictionary. You cannot remove
the English language from the
assisted data, your device can obtain Hold your device correctly
the GPS position faster. When using the GPS receiver, ensure you
do not cover the antenna with your
Your device is preconfigured to use the hand.
Nokia A-GPS service, if no service
provider-specific A-GPS settings are
available. The assistance data is
retrieved from the Nokia A-GPS service
server only when needed.
To disable the A-GPS service, select
Menu > Applications > Location >
GPS data and Options > Positioning
settings > Positioning methods >
Assisted GPS > Options > Disable.
Establishing a GPS connection may take
You must have an internet access point
from a couple of seconds to several
defined in the device to retrieve
minutes. Establishing a GPS connection
assistance data from the Nokia A-GPS
in a vehicle may take longer.
service over a packet data connection.
The access point for A-GPS can be The GPS receiver draws its power from
defined in positioning settings. A the device battery. Using the GPS
wireless LAN (WLAN) access point receiver may drain the battery faster.
cannot be used for this service. Only a
packet data internet access point can be Tips on creating a GPS connection
used. Your device asks you to select the
If your device cannot find the satellite
internet access point when GPS is used
signal, consider the following:
for the first time.
• If you are indoors, go outdoors to
receive a better signal.
• If you are outdoors, move to a more
open space.
• Ensure that your hand does not calculate the coordinates of your
cover the GPS antenna of your location, the bar colour changes.
device.
Initially, your device must receive
• If the weather conditions are bad,
signals from at least four satellites to be
the signal strength may be affected.
able to calculate the coordinates of your
• Some vehicles have tinted location. When the initial calculation
(athermic) windows, which may has been made, it may be possible to
block the satellite signals. continue calculating the coordinates of
your location with three satellites.
Check satellite signal status However, the accuracy is generally
better when more satellites are found.
To check how many satellites your
device has found, and whether your Position requests
device is receiving satellite signals,
You may receive a request from a
select Menu > Applications >
network service to receive your position
Location > GPS data and Options >
information. Service providers may
Satellite status.
offer information about local topics,
such as weather or traffic conditions,
based on the location of your device.
When you receive a position request,
the service that is making the request is
displayed. Select Accept to allow your
position information to be sent or
If your device has found satellites, a bar Reject to deny the request.
for each satellite is displayed in the
satellite information view. The longer Landmarks
the bar, the stronger the satellite signal With Landmarks, you can save the
is. When your device has received position information of specific
enough data from the satellite signal to locations in your device. You can sort the
saved locations into different
categories, such as business, and add landmarks are placed in the Inbox folder
other information to them, such as in Messaging.
addresses. You can use your saved
landmarks in compatible applications, You can sort your landmarks into preset
such as GPS data. categories, and create new categories.
To edit and create new landmark
Select Menu > Applications > categories, open the categories tab, and
Location > Landmarks. select Options > Edit categories.
The coordinates in the GPS are GPS data
expressed using the international Route guidance
WGS-84 coordinate system. Select Menu > Applications >
Select Options and from the following: Location > GPS data and Navigation.
when calculating the distance. Route Options > Reset. To set the trip meter
guidance is active only when you move. and total time to zero, select Restart.
The positioning server may be preset by • Find your way with turn-by-turn
your service provider, and you may not directions.
be able to edit the settings. • Synchronise your favourite
locations and routes between your
Notation settings mobile device and the Ovi Maps
internet service.
To select which measurement system • Check weather forecasts and other
you want to use for speeds and local information, if available.
distances, select Measurement
system > Metric or Imperial.
Note: Downloading content
To define in which format the such as maps, satellite images, voice
coordinate information is displayed in files, guides or traffic information may
your device, select Coordinate format involve transmission of large amounts
and the desired format. of data (network service).
Some services may not be available in
Maps all countries, and may be provided only
in selected languages. The services may
Maps overview be network dependent. For more
information, contact your network
Select Menu > Maps. service provider.
Almost all digital cartography is
Welcome to Maps.
inaccurate and incomplete to some
Maps shows you what is nearby, helps extent. Never rely solely on the
you plan your route, and guides you cartography that you download for use
where you want to go. in this device.
• Find cities, streets, and services. Content such as satellite images, guides,
weather and traffic information and
related services are generated by third
When you use Maps for the first time, underground and may be impaired by
you are prompted to define an internet materials such as concrete and metal.
access point to download map
information or use A-GPS. GPS should not be used for precise
location measurement, and you should
indicates the availability of never rely solely on location data from
the satellite signals. One bar is one the GPS receiver and cellular radio
satellite. When the device is searching networks for positioning or navigation.
for satellite signals, the bar is yellow.
When there is enough data available to The trip meter has limited accuracy, and
calculate your location, the bar turns rounding errors may occur. Accuracy can
green. The more green bars, the more also be affected by availability and
reliable the location calculation. quality of GPS signals.
The Global Positioning System (GPS) is With cell ID based positioning, the
operated by the government of the position is determined through the
United States, which is solely antenna tower your mobile device is
responsible for its accuracy and currently connected to.
maintenance. The accuracy of location
Depending on the available positioning
data can be affected by adjustments to
method, the accuracy of positioning
GPS satellites made by the United States
may vary from a few metres to several
government and is subject to change
kilometres.
with the United States Department of
Defense civil GPS policy and the Federal
Find a location
Radionavigation Plan. Accuracy can also
be affected by poor satellite geometry. Maps helps you find specific locations
Availability and quality of GPS signals and types of business you are looking
may be affected by your location, for.
buildings, natural obstacles, and
Select Menu > Maps and Find places.
weather conditions. GPS signals may
not be available inside buildings or
1 Enter search terms, such as a street internet connection, if you have maps of
address or postcode. To clear the the searched area stored on your device.
search field, select Clear.
2 Select Go. View location details
3 In the list of proposed matches, go View more information about a specific
to the desired item. To display the location or place, such as a hotel or
location on the map, select Map. restaurant, if available.
To view the other locations of the Select Menu > Maps and My position.
search result list on the map, scroll
up and down with the scroll key. View the details of a place
Select a place, press the scroll key, and
Return to the list of proposed
select Show details.
matches
Select List.
Save places and routes
Search for different types of nearby
Save addresses, places of interest, and
places
routes, so they can be quickly used later.
Select Browse categories and a
category, such as shopping, Select Menu > Maps.
accommodation, or transport.
Save a place
1 Select My position.
If no search results are found, ensure
the spelling of your search terms is 2 Go to the location. To search for an
correct. Problems with your internet address or place, select Search.
connection may also affect results when 3 Press the scroll key.
searching online. 4 Select Save place.
To avoid data transfer costs, you can Save a route
also get search results without an active
1 Select My position.
Select Menu > Maps and Favourites. Send a place to your friend's
compatible device
View a saved place on the map Select a location, press the scroll key,
1 Select Places. and select Send.
2 Go to the place.
3 Select Show on map. Share location
To return to the list of saved places, Publish your current location to
select List. Facebook, together with text and a
picture. Your Facebook friends can see The Facebook terms of use apply to
your location on a map. sharing your location on Facebook.
Familiarise yourself with the Facebook
Select Menu > Maps and Share terms of use and the privacy practices.
location.
Before sharing your location to others,
To share your location, you need a Nokia always consider carefully with whom
account and a Facebook account. you are sharing it. Check the privacy
settings of the social networking service
1 Sign in to your Nokia account, or, if you are using as you might share your
you do not yet have one, select location with a large group of people.
Create new account.
2 Sign in to your Facebook account. Synchronise your Favourites
3 Select your current location. Plan a trip on your computer at the Ovi
4 Enter your status update. Maps website, synchronise the saved
5 To attach a picture to your post, places, routes, and collections with your
select Add a photo. mobile device, and access the plan on
the go.
6 Select Share location.
To synchronise places, routes, or
Manage your Facebook account collections between your mobile device
In the main view, select Options > and the Ovi Maps internet service, you
Account > Share location settings > need a Nokia account. If you do not have
Facebook. one, in the main view, select
Options > Account > Nokia
account > Create new account.
Sharing your location and viewing the
location of others requires an internet
connection. This may involve the
transmission of large amounts of data
and related data traffic costs.
Synchronise saved places, routes, When you use drive or walk navigation
and collections for the first time, you are asked to select
Select Favourites > Synchronise with the language of the voice guidance, and
Ovi. If you do not have a Nokia account, download the appropriate files.
you are prompted to create one.
If you select a language that includes
Set the device to synchronise street names, also the street names are
Favourites automatically said aloud. Voice guidance may not be
available for your language.
Select Options > Settings >
Synchronisation > Change > At Change the voice guidance language
start-up and shut-d..
In the main view, select Options >
Settings > Navigation > Drive
Synchronising requires an active guidance or Walk guidance and the
internet connection, and may involve appropriate option.
the transmission of large amounts of
data through your service provider’s
Repeat the voice guidance for car
network. Contact your service provider
navigation
for information about data
transmission charges. In the navigation view, select
Options > Repeat.
To use the Ovi Maps internet service, go
to www.ovi.com. Adjust the volume of the voice
guidance for car navigation
Get voice guidance In the navigation view, select
Voice guidance, if available for your Options > Volume.
language, helps you find your way to a
destination, leaving you free to enjoy
the journey. Drive to your destination
When you need turn-by-turn directions
Select Menu > Maps and Drive or while driving, Maps helps you get to
Walk. your destination.
Select Menu > Maps and Drive. driving. Your first consideration while
driving should be road safety.
Drive to a destination
Select Set destination and the Navigation view
appropriate option.
Drive to your home
Select Drive home.
Use the faster or shorter driving display in the home screen. However, if
route the active profile is General, only today's
Open the Settings tab, and select date is shown.
Drive > Route selection > Faster
route or Shorter route. To create a new profile, select
Options > Create new, and define the
Use the optimised driving route settings.
Open the Settings tab, and select
Drive > Route selection > To customise a profile, select a profile
Optimised. The optimised driving route and Options > Personalise.
combines the advantages of both the
shorter and the faster routes. To activate a profile, select a profile and
Options > Activate.
You can also choose to allow or avoid To set the profile to be active until a
using, for example, motorways, toll certain time within the next 24 hours,
roads, or ferries. scroll to the profile, select Options >
Timed, and set the time. When the time
Personalisation expires, the profile changes back to the
previously active non-timed profile.
You can personalise your device by, for When the profile is timed, is
example, adjusting the various tones, displayed in the home screen. The
background images, and screen savers. Offline profile cannot be timed.
To activate or deactivate the theme To change the 3–D effect that is applied
effects, select General > Options > to the ringing tone, select Sound
Theme effects. trajectory and the desired effect.
Download a theme
Select Menu > Ctrl. panel > Themes. To modify the 3–D effect, select from the
following:
To download a theme, select Trajectory speed — Select the speed
General > Download themes > at which sound moves from one
Options > Go to > New web page. direction to another. This setting is not
Enter the web address from which you available for all effects.
want to download your theme. Once the Reverberation — Select the desired
theme is downloaded, you can preview effect to adjust the amount of echo.
or activate the theme. Doppler effect — Select On to set the
ringing tone sound higher when you are
To preview a theme, select Options > closer to your device, and lower when
Preview. you are farther away. This setting is not
available for all effects.
To activate a theme, select Options >
Set. To listen to the ringing tone with the 3–
D effect, select Options > Play tone.
3-D ringing tones
To adjust the volume of the ringing
Select Menu > Ctrl. panel > 3-D tone, select Menu > Ctrl. panel >
tones. Profiles and Options > Personalise >
Ringing volume.
To enable three-dimensional (3-D)
sound effects for ringing tones, select 3-
D ringing tone effects > On. Not all
ringing tones support 3–D effects.
have been set according to a certain To send the image, select Options >
style or environment. Send.
To change the scene, select Scene To send the image to a caller during an
modes from the toolbar. active call, select Options > Send to
caller.
To make your own scene, scroll to User
defined, and select Options > Change. To deactivate sequence mode, select
Sequence mode > Single shot in the
To copy the settings of another scene, toolbar.
select Based on scene mode and the
desired scene.
View captured image
To activate your own scene, select User Select Menu > Media > Camera.
defined > Select.
The image you captured is
automatically saved in Gallery. If you do
Capture images in a sequence not want to keep the image, select
Select Menu > Media > Camera. Delete from the toolbar.
To add the image to a contact, select Select from the following toolbar items:
Options > Use image > Assign to Send — Send the video clip to a
contact. compatible device.
Sign in to Share online — Send the
The available toolbar items and options video clip to an online album (network
may vary. service).
Delete — Delete the video clip.
Record videos
Select Menu > Media > Camera. To enter a new name for the video clip,
select Options > Rename video clip.
1 If the camera is in image mode,
select video mode from the toolbar.
The available toolbar items and options
2 To start recording, press the scroll may vary.
key.
3 To pause recording, select Pause. Image settings
Select Continue to resume Select Menu > Media > Camera.
recording.
4 To stop recording, select Stop. The To modify still image settings, select
video clip is automatically saved in Options > Settings and from the
Gallery. The maximum length of the following:
video clip depends on the available Image quality — Set the image
memory. quality. The better the image quality,
the more memory the image consumes.
Play a video clip Add to album — Define to which album
Select Menu > Media > Camera. the captured images are saved.
Show captured image — To see the
To play a recorded video clip, select
image after the capture, select Yes. To
Play from the toolbar.
continue capturing images
immediately, select No.
Default image name — Define the the MPEG-4 file format in a multimedia
default name for the captured images. message.
Extended digital zoom — The On Audio recording — Select Mute if you
(continuous) option allows the zoom do not want to record sound.
increments to be smooth and Add to album — Define to which album
continuous between the digital and the recorded videos are saved.
extended digital zoom. The Off option
Show captured video — View the first
allows a limited amount of zoom while
frame of the recorded video clip after
retaining the image resolution.
the recording stops. To view the entire
Capture tone — Set the tone that video clip, select Play from the toolbar.
sounds when you capture an image.
Default video name — Define the
Memory in use — Select where to store default name for recorded video clips.
your images.
Memory in use — Select where to store
Restore camera settings — Restore your video clips.
the camera settings to the default
Restore camera settings — Restore
values.
the camera settings to the default
values.
Video settings
Select Menu > Media > Camera. Gallery
About Gallery
Select Options > Settings and from the
following: Select Menu > Media > Gallery.
Video quality — Set the quality of the Gallery is a storage place for your
video clip. Select Sharing, if you want to images, video and sound clips, songs,
send the video clip using a multimedia and streaming links.
message. The clip is recorded with OCIF
resolution, in the 3GPP file format, and Main view
the size is limited to 300 kB Select Menu > Media > Gallery.
(approximately 20 seconds). You may
not be able to send video clips saved in Select from the following:
To view and edit image or video To view items in the Tags view, add tags
properties, select Options > Details > to the items.
View and edit and from the following:
To view items by months, select
Tags — View the currently used tags. Months.
To add more tags to the current file,
select Add.
To create an album to store items, select
Description — View a free-form Albums > Options > New album.
description of the file. To add a
description, select the field. To add an image or a video clip to an
Title — View the thumbnail image of album, select the item and Options >
the file and the current file name. To edit Add to album.
the file name, select the file name field.
Albums — View in which albums the To delete an image or video clip, select
current file is located. the item and Delete from the active
toolbar.
Resolution — View the size of the
image in pixels.
Duration — View the length of the Active toolbar
video. The active toolbar is available only
Usage rights — To view the DRM rights when you have selected an image or a
of the current file, select View. video clip in a view.
toolbar when it is hidden, press the Add to album. A list of albums opens.
scroll key. Select the album to which you want to
add the image or video clip. The item
you added to the album is still visible in
Select an image or a video clip and from Photos.
the following:
View the image in landscape or To remove an image or a video clip from
portrait mode. an album, select the album and the
Play the video clip. item, and Options > Remove from
album.
Send the image or video clip.
Upload the image or video clip
to a compatible online album Tags
(only available if you have set Select Menu > Media > Gallery >
up an account for a compatible Images.
online album).
Add the item to an album. Use tags to categorise media items in
Manage tags and other Photos. You can create and delete tags
properties of the item. in Tag manager. Tag manager shows
the currently used tags and the number
Albums of items associated with each tag.
Select Menu > Media > Gallery >
Images and Albums. To open Tag manager, select an image
or video clip and Options > Details >
With albums, you can conveniently Tag manager.
manage your images and video clips.
To create a tag, select Options > New
To create a new album, select tag.
Options > New album.
To assign a tag to an image, select the
To add an image or a video clip to an image and Options > Add tags.
album, select the item and Options >
To see the tags you have created, select To resume a paused slide show, select
Tags. The size of the tag name Continue.
corresponds to the number of items the
tag is assigned to. To view all the images To end the slide show, select End.
associated with a tag, select the tag
from the list. To browse the images, scroll left or
right.
To view the list in most frequently used
order, select Options > Most used.
Before starting the slide show, to adjust
To remove an image from a tag, select the slide show settings, select
the tag and the image, and select Options > Slide show > Settings and
Options > Remove from tag. from the following:
Music — Add sound to the slide show.
Song — Select a music file from the list.
Slide show
Delay between slides — Adjust the
Select Menu > Media > Gallery > tempo of the slide show.
Images.
To adjust the volume during the slide
To view your images as a slide show, show, use the volume keys.
select an image and Options > Slide
show > Play forwards or Play
backwards. The slide show starts from Edit images
the selected file. Image editor
To view only the selected images as a To edit the pictures after taking them or
slide show, select Options > Mark/ the ones already saved in Photos, select
Unmark > Mark to mark images. To Options > Edit. The image editor
start the slide show, select Options > opens.
Slide show > Play forwards or Play
backwards.
To open a grid where you can select move the area within the picture, use
different edit options indicated by small the scroll key. To select the area to be
icons, select Options > Apply effect . cropped, press the scroll key.
You can crop and rotate the image;
adjust the brightness, colour, contrast,
and resolution; and add effects, text, Reduce red-eye
clip art, or a frame to the picture. 1 Select Menu > Media > Gallery >
Images.
2 Select an image and Options >
Crop image Edit > (Red eye reduction).
3 Scroll the cross onto the eye, and
To crop an image, select Options >
press the scroll key. Scroll to resize
Apply effect > Crop, and a predefined
the loop to fit the size of the eye. To
aspect ratio from the list. To crop the
reduce the redness, press the scroll
image size manually, select Manual.
key. When you have finished editing
the image, select Done.
If you select Manual, a cross appears in
the upper left corner of the image. Use 4 To save the changes and return to
the scroll key to select the area to crop, the previous view, select Back.
and select Set. Another cross appears in
the lower right corner. Again select the Useful shortcuts
area to be cropped. To adjust the first You can use the following shortcuts
selected area, select Back. The selected when editing images:
areas form a rectangle that forms the
cropped image. • To view a full-screen image, press
*. To return to the normal view,
If you select a predefined aspect ratio, press * again.
select the upper left corner of the area • To rotate an image clockwise or
to be cropped. To resize the highlighted anticlockwise, press 3 or 1.
area, use the scroll key. To freeze the
• To zoom in or out, press 5 or 0.
selected area, press the scroll key. To
• To move on a zoomed image, scroll view, press the scroll key, and select
up, down, left, or right. Take snapshot.
Edit videos
Print images
The video editor supports .3gp and .mp4
video file formats, and .aac, .amr, .mp3, Image print
and .wav audio file formats. It does not
necessarily support all features of a file To print images with Image print, select
format or all the variations of file the image you want to print, and the
formats. print option in Photos, camera, image
editor, or image viewer.
To edit video clips in Photos, scroll to a
video clip, select Options > Edit, and Use Image print to print your images
from the following: using a compatible USB data cable, or
Bluetooth connectivity. You can also
Merge — to add an image or a video print images using wireless LAN. If a
clip to the beginning or the end of the compatible memory card is inserted,
selected video clip you can store the images to the memory
card, and print them using a compatible
Change sound — to add a new sound printer.
clip, and to replace the original sound in
the video clip. You can only print images that are
Add text — to add text to the in .jpeg format. The pictures taken with
beginning or the end of the video clip the camera are automatically saved
Cut — to trim the video and mark the in .jpeg format.
sections you want to keep in the video
clip Printer selection
To take a snapshot of a video clip, in the To print images with Image print, select
cut video view, select Options > Take the image and the print option.
snapshot. In the thumbnail preview
When you use Image print for the first not fit on a single page, scroll up or
time, a list of available compatible down to display the additional pages.
printers is displayed. Select a printer.
The printer is set as the default printer.
Print settings
To use a printer compatible with The available options vary depending
PictBridge, connect the compatible data on the capabilities of the printing device
cable before you select the print option, you selected.
and check that the data cable mode is
set to Image print or Ask on To set a default printer, select
connection. The printer is Options > Default printer.
automatically displayed when you
select the print option. To select the paper size, select Paper
size, the size of paper from the list, and
OK. Select Cancel to return to the
If the default printer is not available, a previous view.
list of available printers is displayed.
To add tags to the post, select Tags:. To search for new podcast episodes to
subscribe to, select Directories.
To send the post to the service, select
Options > Upload. To search for podcasts using keywords
and podcast show titles, select Search.
To search for podcasts, select Search, To restore the default settings, open the
and enter the desired keywords. corresponding settings and select
Options > Restore default.
Tip: Search looks for podcast titles and
keywords in descriptions, not specific
episodes. General topics, such as Music player
football or hip-hop, usually give better Select Menu > Media > Music player.
results than a specific team or artist.
Music player supports file formats such
as AAC, AAC+, eAAC+, MP3, and WMA.
To subscribe to selected channels and Music player does not necessarily
add them to your podcasts, select support all features of a file format or all
Subscribe. the variations of file formats.
To start a new search, select Options > Play a song
New search.
Select Menu > Media > Music player.
To see the details of a podcast, select
To add all available songs to the music
Options > Description. library, select Options > Refresh
library.
Podcasting settings
To play a song, select the desired
To edit the connection settings, select category, and the song.
Options > Settings > Connection.
To pause playback, press the scroll key;
To edit the download settings, select to resume, press the scroll key again. To
Options > Settings > Download. stop playback, scroll down.
To skip to the next item, scroll right. To To create a new playlist, select
return to the beginning of the item, Options > New playlist.
scroll left. To skip to the previous item,
scroll left again within 2 seconds after a To add songs to the playlist, select the
song has started. song and Options > Add to playlist >
Saved playlist or New playlist.
To modify the tone of the music
playback, select Options > Equaliser. To reorder songs in a playlist, scroll to
the song you want to move, and select
To modify the balance and stereo Options > Reorder playlist.
image, or to enhance the bass, select
Options > Settings.
Ovi Music
To return to the home screen and leave With Ovi Music (network service), you
the player playing in the background, can search, browse, purchase, and
press the end key briefly. download music to your device.
The Ovi Music service will eventually
replace the Music store.
Warning:
Continuous exposure to high volume Select Menu > Media > Ovi Music.
may damage your hearing. Listen to
music at a moderate level, and do not To download music, you first need to
hold the device near your ear when the register for the service.
loudspeaker is in use.
Downloading music may involve
additional costs and the transmission of
Playlists large amounts of data (network
service). For information about data
To view and manage playlists, select transmission charges, contact your
Music library > Playlists. network service provider.
To access Ovi Music, you must have a from www.ovi.com, and follow the
valid internet access point in the device. instructions.
You may be asked to select the access • To view your device on a computer
point to use when connecting to Ovi as a mass memory device where
Music. you can transfer any data files,
make the connection with a
Select the access point
compatible USB data cable or
Select Default access point. Bluetooth connectivity. If you are
using a USB data cable, select Mass
The availability and appearance of Ovi storage as the USB connection
Music settings may vary. The settings mode. A compatible memory card
may also be predefined and you may not must be inserted in the device.
be able to modify them. When browsing • To synchronise music with
Ovi Music, you may be able to modify the Windows Media Player, connect a
settings. compatible USB data cable, and
select PC Suite as the USB
Modify Ovi Music settings connection mode. A compatible
Select Options > Settings. memory card must be inserted in
the device.
Ovi Music is not available for all To change the default USB connection
countries or regions. mode, select Menu > Ctrl. panel >
Connectivity > USB and USB
Transfer music from a computer connection mode.
You can use the following methods to
transfer music:
Preset frequency settings
• To install Nokia Ovi Player to Select Menu > Media > Music player
manage and organise your music and Options > Go to Now playing >
files, download the PC software Options > Equaliser.
To reset the frequency bands to their To list recently played files, in the
original values, select Options > Reset application main view, select Recently
to defaults. played.
To create your own frequency setting, To stream content over the air (network
select Options > New preset. service), select Streaming links and a
link. RealPlayer recognises two kinds of
Enter a name for the frequency setting. links: an rtsp:// URL and an http:// URL
that points to a RAM file. Before the
Scroll up or down to move between the content begins streaming, your device
frequency bands, and set the frequency must connect to a website and buffer
for each band. the content. If a network connection
problem causes a playback error,
RealPlayer attempts automatically to
RealPlayer reconnect to the internet access point.
Select Menu > Media > RealPlayer.
To download video clips from the web,
RealPlayer plays video and sound clips select Downld. videos.
that are stored on your device,
transferred from an e-mail message, or
To adjust the volume during playback, To define the settings manually, select
use the volume keys. Options > Settings > Video or
Streaming.
To fast-forward during playback, scroll
right and hold. To rewind during play,
scroll left and hold. Recorder
Select Menu > Media > Recorder.
To stop the playback or streaming,
select Stop. Buffering or the connection With the Recorder application, you can
to the streaming site stops, the playback record voice memos and telephone
of the clip stops, and the clip rewinds to conversations.
the beginning.
The recorder cannot be used when a
To view the video clip in normal screen data call or GPRS connection is active.
mode, select Options > Continue in
normal scr.. To record a sound clip, select .
select . Both parties hear a tone at 1 Select a station from your favourites
regular intervals during recording. or the station directory, or search
for stations by name from the Nokia
Nokia Internet Radio Internet Radio service.
Select Menu > Media > Radio > To add a station manually, select
Internet radio. Options > Add station manually.
You can also browse for station links
With the Nokia Internet Radio with the Web browser application.
application (network service), you can Compatible links are automatically
listen to available radio stations on the opened in the Internet Radio
internet. To listen to radio stations, you application.
must have a wireless LAN (WLAN) or 2 Select Options > Listen.
packet data access point defined in your
device. Listening to the stations may The Now playing view opens,
involve the transmission of large displaying information about the
amounts of data through your service currently playing station and song.
provider's network. The recommended
connection method is WLAN. Check with To pause the playback, press the scroll
your service provider for terms and data key; to resume, press the scroll key
service fees before using other again.
connections. For example, a flat rate
data plan can allow large data transfers To view station information, select
for a set monthly fee. Options > Station information (not
available if you have saved the station
Listen to internet radio stations manually).
Select Menu > Media > Radio > If you are listening to a station saved in
Internet radio. your favourites, scroll left or right to
To listen to a radio station on the listen to the previous or next saved
internet, do the following: station.
To view and listen to your favourite To search for radio stations in the Nokia
stations, select Favourites. Internet Radio service by name, do the
following:
To add a station manually to favourites,
1 Select Search.
select Options > Add station
manually. Enter the web address of the 2 Enter a station name or the first
station and a name that you want to letters of the name in the search
appear in the favourites list. field, and select Options > Search.
Matching stations are displayed.
To add the currently playing station to
favourites, select Options > Add to To listen to a station, select the station
Favourites. and Options > Listen.
radio stations outside the directory, add To change the connection speeds for
station information manually or browse different connection types, select from
for station links on the internet with the the following:
Web browser application. GPRS connection bitrate — GPRS
packet data connections
Select from the following:
3G connection bitrate — 3G packet
Browse by genre — View the available
data connections
radio station genres.
Wi-Fi connection bitrate — WLAN
Browse by language — View the
connections
languages in which there are stations
broadcasting. The quality of the radio broadcast
Browse by country/region — View depends on the selected connection
the countries in which there are stations speed. The higher the speed, the better
broadcasting. the quality. To avoid buffering, use the
Top stations — View the most popular highest quality only with high speed
stations in the directory. connections.
Lock the device You can also lock the device remotely by
The lock code protects your device sending a text message to the device.
against unauthorised use. The preset
code is 12345. Lock your device remotely
1 To enable remote locking, select
To lock the device, in the home screen, Menu > Ctrl. panel > Settings and
press the power key, and select Lock General > Security > Phone and
phone. SIM card > Remote phone
locking > Enabled.
To unlock your device, select Unlock > 2 Enter the text message content. It
OK, enter the lock code, and select OK. can be 5-20 characters, and both
upper and lower case letters can be
To change the lock code, select Menu > used.
Ctrl. panel > Settings and General > 3 Enter the same text again to verify
Security > Phone and SIM card. Enter it.
the old code and then the new code
4 Enter the lock code.
twice. A minimum of 6 characters is
required, and numbers, symbols, and 5 To lock the device remotely, write
upper and lower case letters can be the predefined text, and send it to
used. your device as a text message. To
unlock your device, you need the
lock code.
Keep the lock code secret and in a safe
place separate from your device. If you Memory card security
forget the lock code and your device is Select Menu > Office > File mgr..
locked, your device will require service.
Additional charges may apply, and all
You can protect a memory card with a
the personal data in your device may be
password to prevent unauthorised
deleted. For more information, contact
access.
a Nokia Care point or your device dealer.
key file. The pass phrase should be long With the fixed dialling service, you can
and complex. restrict calls from your device to certain
Encrypt with restored key — Encrypt phone numbers. Not all SIM cards
the memory card with a key you have support the fixed dialling service. For
received. Select the key file, and enter more information, contact your service
the pass phrase. provider.
When security features that restrict calls
Decrypt device memory or memory
are in use (such as call barring, closed
card
user group, and fixed dialling), calls may
Always remember to decrypt the device be possible to the official emergency
memory and/or the memory card number programmed into your device.
before updating the device software. Call barring and call diverting cannot be
active at the same time.
To decrypt the device memory, select
Phone memory. You need your PIN2 code to activate and
deactivate fixed dialling or edit your
To decrypt the memory card without fixed dialling contacts. Contact your
destroying the encryption key, select service provider for your PIN2 code.
Memory card > Decrypt.
Select Options and from the following:
To decrypt the memory card and destroy Activate fixed dialling — Activate the
the encryption key, select Memory fixed dialing.
card > Decrypt and turn off Deactivate fixed dialling
encryption. — Deactivate the fixed dialing.
New SIM contact — Enter the contact
Fixed dialling name and phone number to which calls
Select Menu > Contacts and are allowed.
Options > SIM numbers > Fixed dial Add from Contacts — Copy a contact
contacts. from the list of contacts to the fixed
dialling list.
To send text messages to the SIM you want to reduce the risk of viruses or
contacts while the fixed dialling service other malicious software, and to check
is active, you need to add the text the authenticity of software when you
message centre number to the fixed download and install software to your
dialling list. device.
Certificate corrupted — The the current date and time in your device
certificate cannot be used. Contact the are correct.
certificate issuer.
Before changing any certificate settings,
Certificate trust settings you must make sure that you really trust
the owner of the certificate and that the
Select Menu > Ctrl. panel > Settings
certificate really belongs to the listed
and General > Security > Certificate
owner.
management.
Trusting a certificate means that you To change the trust settings, select a
authorise it to verify web pages, e-mail certificate and Options > Trust
servers, software packages, and other settings. Scroll to an application field,
data. Only trusted certificates can be and press the scroll key to select Yes or
used to verify services and software. No. You cannot change the trust
settings of a personal certificate.
View and edit security modules With Device manager, you can manage
Select Menu > Ctrl. panel > Settings settings, data, and software on your
and General > Security > Security device remotely.
module.
You can connect to a server, and receive
To view or edit a security module, select configuration settings for your device.
You may receive server profiles and
the module from the list.
different configuration settings from
your service providers or company
To view detailed information about a
information management department.
security module, select Options >
Configuration settings may include
Security details.
connection and other settings used by
different applications in your device.
To edit the PIN codes for the security
The available options may vary.
module, open the module, and select
Module PIN to edit the PIN code for the The remote configuration connection is
security module or Signing PIN to edit usually started by the server when the
the PIN code for digital signatures. You device settings need to be updated.
may not be able to change these codes
for all security modules. To create a new server profile, select
Options > Server profiles >
The key store contains the contents of Options > New server profile.
the security module. To delete the key
store, select Options > Delete. You
may not be able to delete the key store You may receive these settings from
of all security modules. your service provider in a configuration
message. If not, define the following:
Server name — Enter a name for the
Remote configuration configuration server.
Select Menu > Ctrl. panel > Data Server ID — Enter the unique ID to
mgr. > Device mgr.. identify the configuration server.
that are Symbian Signed or have passed downloading the JAR file, you may
the Java Verified™ testing. need to enter a user name and
password to access the server. You
Before installation, note the following: obtain these from the supplier or
manufacturer of the application.
• To view the application type,
version number, and the supplier or To install an application or software, do
manufacturer of the application, the following:
select Options > View details.
1 To locate an installation file, select
To display the security certificate Menu > Ctrl. panel > Data mgr. >
details of the application, select App. mgr. and Installation files.
Details: > Certificates: > View Alternatively, search installation
details. files using File manager, or select
• If you install a file that contains an Messaging > Inbox, and open a
update or repair to an existing message that contains an
application, you can only restore installation file.
the original application if you have 2 In Application manager, select the
the original installation file or a full application you want to install.
backup copy of the removed
During installation, the device
software package. To restore the
shows information about the
original application, remove the
progress of the installation. If you
application, and install the
install an application without a
application again from the original
digital signature or certification,
installation file or the backup copy.
the device displays a warning.
The JAR file is required for installing Continue installation only if you are
Java applications. If it is missing, the sure of the origin and contents of
device may ask you to download it. the application.
If there is no access point defined
for the application, you are asked to To start an installed application, select
select one. When you are the application. If the application does
not have a default folder defined, it is
the content, use the backup feature of To view the licence details, select
Nokia Ovi Suite. Options > Licence details.
Other transfer methods may not
transfer the licence which need to be The following details are displayed for
restored with the content for you to be each media file:
able to continue the use of OMA DRM- Status — The status is Licence is
protected content after the device valid, Licence expired, or Licence not
memory is formatted. You may also yet valid.
need to restore the licence in case the
files on your device get corrupted. Content sending — Allowed indicates
that you can send the file to another
If your device has WMDRM-protected device.
content, both the licence and the Content in phone — Yes indicates that
content will be lost if the device memory the file is in the device and the path of
is formatted. You may also lose the the file is displayed. No indicates that
licence and the content if the files on the related file is not currently in the
your device get corrupted. Losing the device.
licence or the content may limit your
ability to use the same content on your To activate a licence, in the licences
device again. For more information, main view, select Invalid licences >
contact your service provider. Options > Get new licence. Establish a
network connection at the prompt, and
Some licence may be connected to a you are directed to a website where you
specific SIM card, and the protected can purchase rights to the media.
content can be accessed only if the SIM
card is inserted in the device. To remove file rights, go to the desired
file, and select Options > Delete. If
To view your licences by type, select there are several rights related to the
Valid licences, Invalid licences, or Not same media file, all the rights are
in use. deleted.
help protect the confidentiality of data. web pages, you must first define
For a VPN policy, contact your company's internet access points for these services.
IT department. Virtual private network (VPN) access
points pair VPN policies with regular
To install and configure the VPN client, internet access points to create secure
certificates, and policies, contact the IT connections.
administrator of your organisation.
Your service provider may preset some
Manage VPN or all access points for your device, and
Select from the following: you may not be able to create, edit, or
remove them.
VPN policies — Install, view, and
update VPN policies. Select a destination and Options >
VPN policy servers — Edit the Edit, and define the following:
connection settings of VPN policy Connection name — Enter a name for
servers from which you can install and the VPN access point.
update VPN policies. A policy server
VPN policy — Select the VPN policy to
refers to a Nokia Security Service
combine with the internet access point.
Manager (NSSM), which is not
necessarily required. Internet access point — Select the
VPN log — View the log for your VPN internet access point with which to
policy installations, updates and combine the VPN policy to create secure
connections for data transfer.
synchronisations, and other VPN
connections. Proxy server address — Enter the
proxy server address of the private
Edit VPN access points network.
Select Menu > Ctrl. panel > Settings Proxy port number — Enter the proxy
and Connection > Destinations. port number.
Use access point — Select whether
An access point is where your phone connections using this access point are
connects to the network. To use e-mail established automatically.
and multimedia services, or to browse
The settings available for editing may the ACE/Server, enter the next
vary. passcode. If you are using
certificate-based authentication,
For the correct settings, contact your you may have to enter the key store
company's IT department. password.
Use a VPN connection in an Settings
application
You may have to prove your identity Select Menu > Ctrl. panel > Settings.
when you log on to the enterprise
network. Contact your company's IT You can define and modify various
department for the credentials. settings of your device. Modifying these
settings affects the operation of your
To use a VPN connection in an device across several applications.
application, the application must be
associated with a VPN access point. Some settings may be preset for the
device or sent to you in a special
Tip: You can configure the application's message by your service provider. You
connection setting to Always ask, in may not be able to change such settings.
which case you select the VPN access
point from a list of connections when a Select the setting you want to edit to do
connection is established. the following:
Phone and SIM card — Modify the To set the keypad to lock automatically
security settings for your device and SIM after a defined period, select Phone
card. and SIM card > Keypad autolock
Certificate management — Manage period.
your security certificates.
To set a time-out period after which the
Protected content — Modify your device is automatically locked and can
settings for DRM-protected content. be used only if the correct lock code is
Security module — Manage your entered, select Phone and SIM card >
security module. Phone autolock period. Enter the
length of the time-out period in
Avoid using codes that are similar to minutes, or select None to deactiveate
emergency numbers to prevent the autolock feature. When the device is
accidental dialling of the emergency locked, you can still answer incoming
number. Codes are shown as asterisks. calls, and calls may still be possible to
When you change a code, enter the the official emergency number
current code, then the new code twice. programmed into your device.
Device and SIM card security To change the lock code, select Phone
and SIM card > Lock code. The default
Select Menu > Ctrl. panel >
lock code is 12345. Enter the current
Settings > General > Security.
code and then the new code twice. The
To change the PIN code, select Phone new code must be 4-255 characters
and SIM card > PIN code. The new long. Alphanumeric (uppercase and
code must be 4 to 8 digits long. The PIN lowercase) characters can be used. The
code protects your SIM card against device notifies you if the lock code is not
unauthorised use and is provided with properly formatted.
the SIM card. After three consecutive
incorrect PIN code entries, the code is Restore original settings
blocked, and you need to use the PUK
code to unblock it before you can use To restore the original device settings,
the SIM card again. select Menu > Ctrl. panel > Settings
Message text — Write the standard To select the network mode, select
text message that is sent when you Network mode and Dual mode,
reject a call. UMTS, or GSM. In dual mode, the device
Own video in recvd. call — Allow or switches automatically between
deny video sending during a video call networks.
from your device.
Image in video call — If video is not Tip: Selecting UMTS enables faster data
sent during a video call, select the image transfer, but may increase the demand
to be displayed instead. on battery power and reduce the
Automatic redial — Set your device to battery life. In regions close to both GSM
make a maximum of 10 attempts to and UMTS networks, selecting Dual
connect the call after an unsuccessful mode may cause constant jumping
call attempt. To stop automatic between the two networks, which also
redialling, press the end key. increases the demand on battery
Show call duration — Display the power.
length of a call during a call.
To select the operator, select Operator
Summary after call — Display the selection and Manual to select from
length of a call after a call. available networks, or Automatic to set
Speed dialling — Activate speed the device to select the network
dialling. automatically.
Anykey answer — Activate anykey
answer. To set the device to indicate when it is
used in a microcellular network (MCN),
Contact search — Activate contact
select Cell info display > On.
search in the home screen.
To create a new access point, select To use a data connection, your service
Access point. provider must support this feature, and
The device asks to check for available if necessary, activate it for your SIM card.
connections. After the search,
connections that are already available Create access point groups
are displayed and can be shared by a Select Menu > Ctrl. panel > Settings
new access point. and Connection > Destinations.
If you skip this step, you are asked to
Some applications allow you to use
select a connection method and to
access point groups to connect to a
define the settings needed.
network.
To edit the settings of an access point, To avoid selecting which access point to
select one of the access point groups, use every time the device attempts to
scroll to an access point, and select connect to a network, you can create a
Options > Edit. Use the instructions group that contains various access
provided by your service provider to edit points, and define the order in which
the following: the access points are used to connect to
a network.
Connection name — Enter a name for
the connection. For example, you can add wireless LAN
Data bearer — Select the data (WLAN) and packet data access points to
connection type. an internet access point group and use
the group for browsing the web. If you
give the WLAN access point the higher To edit a packet data access point, open
priority, the device connects to the one of the access point groups, and
internet through a WLAN if available select an access point marked with
and through a packet data connection if .
not.
To create a new access point group, Follow the instructions from your
select Options > Manage > New service provider.
destination.
Select from the following:
To add access points to an access point Connection name — Define a name for
group, select the group and Options > the connection.
New access point. To copy an existing Data bearer — You might not be able
access point from another group, select to edit the data bearer once defined.
the group, scroll to an existing access Define a new access point if needed.
point, and select Options >
Access point name — You obtain the
Organise > Copy to other dest..
access point name from your service
To change the priority order of access provider.
points within a group, scroll to an access User name — The user name may be
point, and select Options > needed to make a data connection, and
Organise > Change priority. is usually provided by your service
provider.
Prompt password — If you must enter
Packet data access points the password every time you log in to a
Select Menu > Ctrl. panel > Settings server, or if you do not want to save your
and Connection > Destinations > password in the device, select Yes.
Access point, and follow the Password — A password may be
instructions on the screen. needed to make a data connection and
is usually provided by your service
provider.
WLAN network mode — Select Ad- IPv4 settings — Enter the IP address of
hoc to create an ad hoc network, and to your device, the subnet IP address, the
allow devices to send and receive data default gateway, and the IP addresses
directly; a WLAN access point device is of the primary and secondary DNS
not needed. In an ad hoc network, all servers. Contact your internet service
devices must use the same WLAN provider for these addresses.
network name. IPv6 settings — Define the type of DNS
WLAN security mode — Select the address.
encryption used: WEP, 802.1x, or WPA/ Ad-hoc channel (only for ad hoc
WPA2. (802.1x and WPA/WPA2 are not networks) — To enter a channel
available for ad hoc networks.) If you number (1-11) manually, select User
select Open network, no encryption is defined.
used. The WEP, 802.1x, and WPA
Proxy server address — Enter the
functions can be used only if the
address for the proxy server.
network supports them.
Proxy port number — Enter the proxy
Use access point — Select After
port number.
confirmation to set the device to ask
for confirmation before the connection
Packet data (GPRS) settings
using this access point is created or
Automatically to set the device to Select Menu > Ctrl. panel > Settings
connect to the destination using this and Connection > Packet data.
access point automatically.
Your device supports packet data
connections, such as GPRS in the GSM
To enter the settings for the selected
network. When you are using your
security mode, select WLAN security
device in GSM and UMTS networks, it is
settings.
possible to have multiple data
connections active at the same time;
Advanced WLAN settings access points can share a data
connection, and data connections
Select Options > Advanced settings
and from the following:
remain active, for example, during voice To select the interval for your device to
calls. scan for available WLANs, and to update
the indicator, select Scan for
To define the packet data settings, networks. This setting is not available
select Packet data connection and unless you select Show WLAN
When available to register the device availability > Yes.
to the packet data network when you
switch the device on in a supported To set the device to test the internet
network, or When needed to register capability of the selected WLAN
the device to a packet data network only automatically, to ask for permission
when an application or action attempts every time, or to never perform the
to establish a packet data connection. connectivity test, select Internet
This setting affects all access points for connectivity test > Run
packet data connections. automatically, Ask every time, or
Never run. If you select Run
To use the device as a packet data automatically or allow the test to be
modem for your computer, select performed when the device asks for it,
Access point, and enter the access and the connectivity test is performed
point name provided by your service successfully, the access point is saved to
provider. internet destinations.
encrypted with the WEP keys, the data 802.1x security settings
is discarded. Select 802.1x as the WLAN security
mode.
In an ad-hoc network, all devices must
use the same WEP key. 802.1x authenticates and authorises
devices to access a wireless network,
Select WLAN security settings and and prevents access if the authorisation
from the following: process fails.
WEP key in use — Select the desired
WEP key. Select WLAN security settings and
Authentication type — Select Open or from the following:
Shared. WPA/WPA2 — Select EAP (Extensible
WEP key settings — Edit the settings Authentication Protocol) or Pre-shared
for the WEP key. key (a secret key used for device
identification).
WEP key settings EAP plug-in settings — If you selected
In an ad-hoc network, all devices must WPA/WPA2 > EAP, select which EAP
use the same WEP key. plug-ins defined in your device to use
with the access point.
Select WLAN security settings > WEP Pre-shared key — If you selected
key settings and from the following: WPA/WPA2 > Pre-shared key, enter
WEP encryption — Select the desired the shared private key that identifies
WEP encryption key length. your device to the WLAN to which you
WEP key format — Select whether you connect.
want to enter the WEP key data in
ASCII or Hexadecimal format. WPA security settings
WEP key — Enter the WEP key data. Select WPA/WPA2 as the WLAN security
mode.
Select WLAN security settings and
from the following:
WPA/WPA2 — Select EAP (Extensible You can view the EAP plug-ins currently
Authentication Protocol) or Pre-shared installed in your device (network
key (a secret key used for device service).
identification).
EAP plug-in settings — If you select EAP plug-ins
WPA/WPA2 > EAP, select which EAP 1 To define the EAP plug-in settings,
plug-ins defined in your device to use select Options > New access
with the access point. point, and define an access point
Pre-shared key — If you select WPA/ that uses WLAN as a data bearer.
WPA2 > Pre-shared key, enter the 2 Select 802.1x or WPA/WPA2 as the
shared private key that identifies your security mode.
device to the WLAN to which you 3 Select WLAN security settings >
connect. WPA/WPA2 > EAP > EAP plug-in
WPA2 only mode — To allow both TKIP settings.
and AES (Advanced Encryption
Standard) encryption, select Off. To Use EAP plug-ins
allow AES only, select On
To use an EAP plug-in when you connect
Wireless LAN plugins to a WLAN using the access point, select
Select Menu > Ctrl. panel > Settings the desired plug-in and Options >
and Connection > Destinations, and Enable. The EAP plug-ins enabled for
an access point group. use with this access point have a check
mark next to them. To not use a plug-in,
The extensible authentication protocol select Options > Disable.
(EAP) plug-ins are used in wireless
networks to authenticate wireless To edit the EAP plug-in settings, select
devices and authentication servers, and Options > Edit.
the different EAP plug-ins make possible
the use of various EAP methods To change the priority of the EAP plug-
(network service). in settings, select Options > Raise
priority to attempt to use the plug-in
before other plug-ins when connecting To select the SIP profile you want to use
to the network with the access point, or by default for communication sessions,
Options > Lower priority to use this select Options > Default profile.
plug-in for network authentication
after attempting to use other plug-ins.
Edit SIP profiles
See the device help for more Select Menu > Ctrl. panel > Settings
information on EAP plugins. and Connection > SIP settings.
Select Options > Edit and from the
Session initiation protocol (SIP)
following:
settings
Profile name — Enter a name for the
Select Menu > Ctrl. panel > Settings
SIP profile.
and Connection > SIP settings.
Service profile — Select IETF or Nokia
The session initiation protocol (SIP) is 3GPP.
used for creating, modifying, and Default destination — Select the
terminating certain types of destination to use for the internet
communication sessions with one or connection.
more participants (network service). SIP
profiles include settings for these Default access point — Select the
sessions. The SIP profile used by default access point to use for the internet
for a communication session is connection.
underlined. Public user name — Enter your user
name provided by your service provider.
To create a SIP profile, select Use compression — Select if
Options > New SIP profile > Use compression is used.
default profile or Use existing Registration — Select the registration
profile.
mode.
Use security — Select if security
negotiation is used.
Proxy server — Enter the proxy server Port — Enter the port number of the
settings for this SIP profile. proxy server.
Registrar server — Enter the
registration server settings for this SIP Edit registration servers
profile. Select Options > New SIP profile or
Edit > Registrar server.
Edit SIP proxy servers
Select from the following:
Select Options > New SIP profile or
Edit > Proxy server. Registrar server address — Enter the
host name or IP address of the registrar
Proxy servers are intermediate servers server in use.
between a browsing service and its Realm — Enter the registrar server
users used by some service providers. realm.
These servers may provide additional
security and speed up access to the User name and Password — Enter your
service. user name and password for the
registrar server.
Select from the following: Transport type — Select UDP,
Proxy server address — Enter the host Automatic, or TCP.
name or IP address of the proxy server Port — Enter the port number of the
in use. registrar server.
Realm — Enter the proxy server realm.
Configuration settings
User name and Password — Enter your
user name and password for the proxy Select Menu > Ctrl. panel > Settings
server. and Connection > Configurations.
Allow loose routing — Select if loose You can receive messages from your
routing is allowed. service provider or company
Transport type — Select UDP, information management containing
Automatic, or TCP. configuration settings for trusted
servers. These settings are
Q: What is my lock, PIN, or PUK code? Q: Why can’t I find my friend’s device
while using Bluetooth connectivity?
A: The default lock code is 12345. If you
forget or lose the lock code, contact your A: Check that both devices are
device dealer. If you forget or lose a PIN compatible, have activated Bluetooth
or PUK code, or if you have not received connectivity, and are not in hidden
such a code, contact your network mode. Check also that the distance
service provider. between the two devices is not over 10
metres (33 feet) and that there are no
walls or other obstructions between the
Q: How do I close an application that
devices.
is not responding?
A: Press and hold the home key. Scroll to Q: Why can’t I close a Bluetooth
the application, and press the connection?
backspace key to close the application.
A: If another device is connected to your
device, you can close the connection
Q: Why do images look smudgy?
using the other device or by
deactivating Bluetooth connectivity.
A: Ensure that the camera lens Select Menu > Ctrl. panel >
protection windows are clean.
Q: How do I check the signal quality Q: Why can’t I select a contact for my
of my WLAN connection? message?
Select Menu > Ctrl. panel >
Connectivity > Conn. mgr. and Active A: The contact card does not have a
data connections > Options > phone number, an address, or an e-mail
Details. If the signal quality is weak or address. Select Menu > Contacts, and
moderate, you may encounter edit the contact card.
connection problems. Try again closer
to the access point.
Q: The note Retrieving message is
shown briefly. What is happening?
Q: Why do I have problems with the
security mode? A: The device is trying to retrieve a
multimedia message from the
A: Check that you have configured the multimedia messaging centre. This note
security mode correctly, and that it is is shown if you have selected Menu >
the same that the network uses. To Messaging and Options > Settings >
check the security mode the network Multimedia message > Multimedia
uses, select Menu > Ctrl. panel > retrieval > Always automatic.
Connectivity > Conn. mgr. and Active Check that the settings for multimedia
data connections > Options > messaging are defined correctly and
Details. that there are no mistakes in phone
numbers or addresses.
Check also the following: you have the
correct WPA mode (preshared key or
EAP), you have disabled all EAP types Q: How can I end the data connection
that are not needed, and all the EAP type when the device starts a data
settings are correct (passwords, user connection again and again?
names, certificates).
A: The device may be trying to retrieve
a multimedia message from the
multimedia message centre. To stop the
device from making a data connection, reduce the battery life time. To save
select Menu > Messaging and battery power, do the following:
Options > Settings > Multimedia
message > Multimedia retrieval >
Manual to have the multimedia • Deactivate Bluetooth connectivity
messaging centre save messages to be when you do not need it.
retrieved later, or Off to ignore all • Stop the background scans for
incoming multimedia messages. If you WLAN. Select Menu > Ctrl. panel >
select Manual, you receive a Settings and Connection >
notification when there is a new Wireless LAN > Show WLAN
multimedia message that you can availability > Never. You can still
retrieve in the multimedia message manually scan for available WLANs
centre. If you select Off, the device does and connect to WLANs as usual.
not make any network connections • Set the device to use a packet data
related to multimedia messaging. connection only if you start an
application or action that needs it.
To set the device to use a packet data Select Menu > Ctrl. panel >
connection only if you start an Settings and Connection >
application or action that needs it, Packet data > Packet data
select Menu > Ctrl. panel > Settings connection > When needed.
and Connection > Packet data > • Prevent the device from
Packet data connection > When automatically downloading new
needed. maps in the Maps application. Select
Menu > Maps and Options >
If this does not help, restart the device. Settings > Internet >
Connection.
Q: How do I save battery power? • Change the time-out after which the
backlight is switched off. Select
A: Many features in your device increase Menu > Ctrl. panel > Settings and
the demand on battery power and General > Personalisation >
Display > Light time-out.
• Close the applications you are not your device for repair, always back up
using. Press and hold the home key. the data in your device.
Scroll to the application, and press
the backspace key to close the Update device software
application. About device software and
application updates
Find help With device software updates and
application updates, you can get new
Support features and enhanced functions for
When you want to learn more about your device. Updating the software may
how to use your product or you are also improve your device performance.
unsure how your device should
function, go to www.nokia.com/
support, or using a mobile device,
nokia.mobi/support. You can also select
Menu > Help > Help in your device.
If this does not resolve your issue, do
one of the following:
• Reboot your device. Switch off the
device, and remove the battery.
After about a minute, replace the
battery, and switch on the device.
• Restore the original factory
settings.
• Update your device software.
If your issue remains unsolved, contact
Nokia for repair options. Go to
www.nokia.com/repair. Before sending
Downloading software updates may To open help texts from the main menu,
involve the transmission of large select Menu > Help > Help and the
amounts of data (network service). application for which you want to read
instructions.
Make sure that the device battery has
enough power, or connect the charger When an application is open, to access
before starting the update. the help text for the current view, select
Options > Help.
After you update your device software
or applications, the instructions in the When you are reading the instructions,
user guide may no longer be up to date. to change the size of the help text, select
Options > Decrease font size or
Update device software using your Increase font size.
PC
You can use the Nokia Software Updater You may find links to related topics at
PC application to update your device the end of the help text.
software. To update your device If you select an underlined word, a short
software, you need a compatible PC, a explanation is displayed.
high-speed internet connection, and a
Help texts use the following indicators: from your service providers already
installed in your device, or you may
Link to a related help topic. receive or request the settings from the
Link to the application being network service providers as a special
discussed. message.
When you are reading the instructions, You can change the general settings in
to switch between help texts and the your device, such as language, standby
application that is open in the mode, display, and keypad lock settings.
background, select Options > Show
open apps. and the desired application.
Prolong battery life
Many features in your device increase
Do more with your device the demand on battery power and
There are various applications provided reduce the battery lifetime. To save
by Nokia and third party software battery power, note the following:
developers, that help you do more with
your device. To find and download • Features that use Bluetooth
applications, visit the Ovi Store at technology, or allowing such
store.ovi.com. These applications are features to run in the background
explained in the guides that are while using other features, increase
available on the product support pages the demand on battery power.
at www.nokia.com/support or your Deactivate Bluetooth technology
local Nokia website. when you do not need it.
• Features that use wireless LAN
Settings (WLAN), or allowing such features
Your device normally has MMS, GPRS, to run in the background while
streaming, and mobile internet settings using other features, increase the
automatically configured, based on demand on battery power. WLAN on
your network service provider your Nokia device deactivates when
information. You may have settings you are not trying to connect, not
connected to an access point, or not
necessary to connect the charger, then disconnect and happens, flush the affected areas immediately with water,
reconnect it to begin charging the battery. If the battery or seek medical help.
is completely discharged, it may take several minutes
before the charging indicator appears on the display or Damage. Do not modify, remanufacture, attempt to insert
before any calls can be made. foreign objects into the battery, or immerse or expose it
to water or other liquids. Batteries may explode if
Safe removal. Always switch the device off and disconnect damaged.
the charger before removing the battery.
Correct use. Use the battery only for its intended purpose.
Proper charging. Unplug the charger from the electrical Improper battery use may result in a fire, explosion, or
plug and the device when not in use. Do not leave a fully other hazard. If the device or battery is dropped, especially
charged battery connected to a charger, since on a hard surface, and you believe the battery has been
overcharging may shorten its lifetime. If left unused, a fully damaged, take it to a service centre for inspection before
charged battery will lose its charge over time. continuing to use it. Never use any charger or battery that
is damaged. Keep your battery out of the reach of small
Avoid extreme temperatures. Always try to keep the children.
battery between 15°C and 25°C (59°F and 77°F). Extreme
temperatures reduce the capacity and lifetime of the Nokia battery authentication guidelines
battery. A device with a hot or cold battery may not work Always use original Nokia batteries for your safety. To
temporarily. Battery performance is particularly limited in check that you are getting an original Nokia battery,
temperatures well below freezing. purchase it from a Nokia authorised service centre or
dealer, and inspect the hologram label using the following
Do not short-circuit. Accidental short-circuiting can occur steps:
when a metallic object such as a coin, clip, or pen causes
direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on
the battery.) This might happen, for example, when you
carry a spare battery in your pocket or purse. Short-
circuiting the terminals may damage the battery or the
connecting object.
Authenticate hologram To find out more about original Nokia batteries, see
1 When you look at the hologram on the label, you www.nokia.com/battery.
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements Taking care of your device
logo when looking from another angle. Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your warranty
coverage.
attachments could damage the device and may separation distance instructions until the transmission is
violate regulations governing radio devices. completed.
• Use chargers indoors.
Parts of the device are magnetic. Metallic materials may
• Backup all data you want to keep, such as contacts be attracted to the device. Do not place credit cards or
and calendar notes. other magnetic storage media near the device, because
• To reset the device from time to time for optimum information stored on them may be erased.
performance, power off the device and remove the
battery. Medical devices
Operation of radio transmitting equipment, including
These suggestions apply equally to your device, battery, wireless phones, may interfere with the function of
charger, or any accessory. inadequately protected medical devices. Consult a
physician or the manufacturer of the medical device to
Recycle determine whether they are adequately shielded from
Always return your used electronic products, batteries, external RF energy. Switch off your device when
and packaging materials to dedicated collection points. regulations posted instruct you to do so, for example, in
This way you help prevent uncontrolled waste disposal hospitals.
and promote the recycling of materials. Check product
environmental information and how to recycle your Nokia Implanted medical devices
products at www.nokia.com/werecycle, or with a mobile Manufacturers of medical devices recommend a minimum
device, nokia.mobi/werecycle. separation of 15.3 centimetres (6 inches) between a
wireless device and an implanted medical device, such as
Additional safety information a pacemaker or implanted cardioverter defibrillator, to
Small children avoid potential interference with the medical device.
Your device and its accessories are not toys. They may Persons who have such devices should:
contain small parts. Keep them out of the reach of small
children. • Always keep the wireless device more than 15.3
centimetres (6 inches) from the medical device.
Operating environment • Not carry the wireless device in a breast pocket.
This device meets RF exposure guidelines in the normal
• Hold the wireless device to the ear opposite the
use position at the ear or at least 1.5 centimetres (5/8
medical device.
inch) away from the body. Any carry case, belt clip, or
holder for body-worn operation should not contain metal • Turn the wireless device off if there is any reason to
and should position the device the above-stated distance suspect that interference is taking place.
from your body. • Follow the manufacturer directions for the
implanted medical device.
To send data files or messages requires a quality
connection to the network. Data files or messages may be
delayed until such a connection is available. Follow the
If you have any questions about using your wireless device chemical plants; or where blasting operations are in
with an implanted medical device, consult your health progress. Areas with a potentially explosive atmosphere
care provider. are often, but not always, clearly marked. They include
areas where you would be advised to turn off your vehicle
engine, below deck on boats, chemical transfer or storage
facilities and where the air contains chemicals or particles
Note: The surface of this device does not
such as grain, dust, or metal powders. You should check
contain nickel in the platings. The surface of this device with the manufacturers of vehicles using liquefied
contains stainless steel. petroleum gas (such as propane or butane) to determine
if this device can be safely used in their vicinity.
Vehicles
RF signals may affect improperly installed or inadequately Emergency calls
shielded electronic systems in motor vehicles such as
electronic fuel injection, electronic antilock braking,
electronic speed control, and air bag systems. For more Important: This device operates using radio
information, check with the manufacturer of your vehicle signals, wireless networks, landline networks, and user-
or its equipment. programmed functions. If your device supports voice calls
over the internet (internet calls), activate both the internet
Only qualified personnel should service the device or calls and the cellular phone. The device may attempt to
install the device in a vehicle. Faulty installation or service make emergency calls over both the cellular networks and
may be dangerous and may invalidate your warranty. through your internet call provider if both are activated.
Check regularly that all wireless device equipment in your Connections in all conditions cannot be guaranteed. You
vehicle is mounted and operating properly. Do not store should never rely solely on any wireless device for
or carry flammable liquids, gases, or explosive materials essential communications like medical emergencies.
in the same compartment as the device, its parts, or
accessories. Remember that air bags inflate with great To make an emergency call:
force. Do not place your device or accessories in the air bag
deployment area. 1 If the device is not on, switch it on. Check for
adequate signal strength. Depending on your
Switch off your device before boarding an aircraft. The use device, you may also need to complete the
of wireless teledevices in an aircraft may be dangerous to following:
the operation of the aircraft and may be illegal.
• Insert a SIM card if your device uses one.
Potentially explosive environments
• Remove certain call restrictions you have
Switch off your device in any area with a potentially
activated in your device.
explosive atmosphere. Obey all posted instructions. Sparks
in such areas could cause an explosion or fire resulting in • Change your profile from Offline or Flight
bodily injury or death. Switch off the device at refuelling profile to an active profile.
points such as near gas pumps at service stations. Observe 2 Press the end key as many times as needed to clear
restrictions in fuel depots, storage, and distribution areas; the display and ready the device for calls.
3 Enter the official emergency number for your Use of device accessories may result in different SAR
present location. Emergency numbers vary by values. SAR values may vary depending on national
location. reporting and testing requirements and the network
4 Press the call key. band. Additional SAR information may be provided under
product information at www.nokia.com.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device Copyright and other notices
may be the only means of communication at the scene of
an accident. Do not end the call until given permission to
do so. DECLARATION OF CONFORMITY
The exposure guidelines for mobile devices employ a unit Nokia, Nokia Connecting People, and Navi are trademarks
of measurement known as the Specific Absorption Rate or or registered trademarks of Nokia Corporation. Nokia tune
SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 is a sound mark of Nokia Corporation. Other product and
watts/kilogram (W/kg) averaged over 10 grams of tissue. company names mentioned herein may be trademarks or
Tests for SAR are conducted using standard operating tradenames of their respective owners.
positions with the device transmitting at its highest
certified power level in all tested frequency bands. The Reproduction, transfer, distribution, or storage of part or
actual SAR level of an operating device can be below the all of the contents in this document in any form without
maximum value because the device is designed to use only the prior written permission of Nokia is prohibited. Nokia
the power required to reach the network. That amount operates a policy of continuous development. Nokia
changes depending on a number of factors such as how reserves the right to make changes and improvements to
close you are to a network base station. any of the products described in this document without
prior notice.
The highest SAR value under the ICNIRP guidelines for use
of the device at the ear is 0.88 W/kg.
/Issue 1.5 EN
Index attachments
— multimedia messages 63
audio files
Symbols/Numbers — details 132
3-D ringing tones 112 audio messages 59
802.1x auto-update for time/date 29
— security settings 164 autolock period 154
A B
A-GPS (assisted GPS) 93 background image 111
access codes 20 backing up device memory 87
access points 71, 157 battery
— groups 158 — charging 13
— VPN 149 — inserting 11
accessories — saving power 181
— settings 153 blocking
accounts 55 — device 77
Active notes 86 blogs 82
active toolbar Bluetooth 74, 77
— in Photos 120 Bluetooth connectivity
alarm clock 29 — device address 75
albums — low memory 76
— media 121 — pairing devices 75
answering calls 33 — receiving data 76
antennas 15 — sending data 75
application manager 143 bookmarks 83
application settings 168 browser
applications 143 — bookmarks 80, 83
assisted GPS (A-GPS) 93 — browsing pages 80, 81
Photos printing 90
— tags 121 — images 124
photos 119 profiles
— editing 122 — creating 109
— file details 119 — personalising 109, 110
— organising files 120 — selecting ringing tones 110
— toolbar 120 proxy settings 160
PictBridge 124 PUK codes 20
pictures
— copying 16 R
PIN code 20 RealPlayer
— changing 154 — playing media clips 131
pin code 15 — settings 132
PIN2 code 20 — viewing clip details 132
playing recent calls 43
— video and audio 131 red-eye removal 123
podcasting 126 rejecting calls 33
— directories 127 remote configuration 141
— searching 127 remote lock 136
— settings 128 remote SIM mode 77
positioning restoring original settings 154
— settings 155 ringing tones 151
positioning information 93 — 3-D 112
positioning settings 97 — in profiles 110
predictive text input 24, 152 roaming 69
presence 56
presentations 61, 118 S
printer settings 90 screen saver 111, 151
W
web browser 79
web connection 79
welcome note 151
WEP
— keys 164
— security settings 163
wireless LAN (WLAN) 69
WLAN
— 802.1x security settings 164
— advanced settings 162