Professional Documents
Culture Documents
Company information:
Palram Americas Inc. 9735 Commerce Parkway Kutztown, PA, USA
E-Mail: greenhouseUSA.support@palram.com
In case of addition SNAP & GROW 6x4 Extension Kit purchase Please refer to the assembly instruction provided in the 4' Extension Kit Box Only
English - 68803
X2
7mm 10mm
I M P O RT A N T
Please read these instructions carefully before you start to assemble this greenhouse. Please carry out the steps in the order set out in these instructions. Keep these instructions in a safe place for future reference.
directly in to the concrete ensure there are no hidden pipes or cables in the ground before inserting the pegs.
General Advice
This multi-part assembly is best achived by two people. Allow at least half a day for assembly process. Site selection instruction-choose a sunny level position away from overhanging trees. If you are fixing your greenhouse directly to a solid concrete foundation use the pre drilled holes in the metal base supplied. The component parts should be checked and laid out close at hand. Keep all small parts (screws etc.) in a bowl so they do not get lost.
The front of the greenhouse is the wall including the door, and the back is the opposite wall. After assembly fit the greenhouse to the base using connectors no. 35 and fit the whole unit to a leveled final position. You may use Silicon lubricant spray in order to help you slide the profiles on the connectors. Do not spray the Polycarbonate panels. Use the rubber malet if necessary. Avoid shaking the plastic connectors.
step 12
Slide the panel 550 till the end of the rail and insert it into its final position as shown in illustartion c .
step 13
Profile 808 should be placed on the right. Profile 807 should be placed on the left. Profile 803 should be placed on the left Profile 804 should be placed on the right.
step 16
Be careful to assemble the window in the position as shown on picture 17 a. profile 809 should be placed while the vent is closed to cover any gap. Ensure profile 809 is fitted correctly as shown on picture 16 b. The lip on 809 should face toward the gutter.
Safety Advice
We strongly recommend the use of work gloves during assembly . Do not attempt to assemble the greenhouse in windy or wet conditions. Do not touch overhead power cables with the aluminum profiles. Always wear shoes and safety goggles when working with extruded aluminum. Dispose of all plastic bags safely - keep them out of reach of small children. The greenhouse must be positioned and fixed on a flat level surface. Do not lean against or push the greenhouse during construction. Keep children away from the assembly area. Do not position your greenhouse in an area exposed to excessive wind. Do not attempt to assemble this greenhouse if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells. If using a step ladder or power tools ensure that you follow the manufacturers safety advice. Hot items such as recently used grills, blowtorches, should kept away from the greenhouse walls. We recommend the greenhouse is bolted to a concrete base or slabs (fix hinges are not supplied). However, if you want to fix
step 3
Profile 821 should be placed on the left hand side to be connected to profile 822. Profile 821 is the one with the connector at the end.
step 19
Slide the panel 550 till the end of the rail and insert it into its final position as shown in illustartion a and b.
step 4
After connecting profiles 816 to each other clean the connection area using a cloth. Place the cover strip on the conection only when it is clean and dry. press the cover strip from one side of the connection to the other as mentioned in picture 4.
step 20
Step inside the greenhouse and turn all 23 plugs a 1/4 of a turn clockwise.
step 7
Profile 800 & 801 should be aligned and connected according to the illustration on page 7 a & b. plug 23 should be inserted to each connection while the two dots on the front of the plug should be in horizontal position for easy assembly.
step 21
Profiles 814 should be inserted from the four corners of the greenhouse, then insert profile 815 in between them.
step 23
Ensure you use long screw 450 to secure the door catch 43 as shown in illustration b.
step 9
Use part 95 as a template in order to measure the gap between posts 800 & 801 of the greenhouse wall and roof area.
step 25
Bend the tab lock from the inside after bending the base parts, then lock it using screw 447.
step 11
Profile 806 should be placed on the right hand side. Profile 805 should be placed on
step 28
You should tighten screw 97 when profiles 807 & 808 are aliened and connected.
Contents
Item cm/Inc Qty. Item cm/Inc Qty. Item cm/Inc Qty. Item cm/Inc Qty. Item cm/Inc Qty.
817
118cm/461/2
x2
821
113cm/511/4
x2
811
53cm/203/4
x2
804
46cm/18
x1
814
90cm/351/2
x4
824
118cm/461/2
x2
822
113cm/511/4
x2
812
53cm/203/4
x2
807
46cm/18
x1
815
60cm/231/2
x2
818
60cm/231/2
x2
816
118cm/461/2
x2
802
115cm/45
x2
808
46cm/18
x1
823
115.5cm/451/2
x4
819
57.5cm/223/4
x2
813
118cm/461/2
x4
805
115cm/45
x1
810
56cm/22
x1
833
53cm/203/4
x4
825
57.5cm/223/4
x2
801
112.5cm/441/2
x6
806
115cm/45
x1
809
55.5cm/213/4
x1
834
57cm/221/2
x1
820
114cm/443/4
x4
800
113cm/441/4
x6
803
46cm/18
x1
826
11.5cm/41/2
x4
Contents
Item
21
Qty.
Item
Qty.
Item
Qty.
Item
Qty.
Item
Qty.
21
spare
x4 x1 43 x1 25 x2 550 x 20 556 x1
23
23
x9 spare x 2
35
x 28 spare x 4
46
x2
26
x2 555 x1 557 x1
96
97
x2
x1
98B
x2
48
x2 29B x1 551 x2
29B
98A
100
x1
447
40mm spare
x10 x1 49B x1 99 x1
450
50mm spare
x2 x1
Contents
Item Qty. Item Qty.
Spare Parts
463
x4
250
126cm/491/2
x4 422 x 16 spare x 1
95
56.5cm/221/2
x2
x1
251
65.4cm/253/4
x2
465
spare
x 16 x1
461
spare
x 30 x1
#4
x1
252
126cm/491/2
x2
464
x8 466
spare
x 42 x4
462 300
140cm/55
x4
x1 411
spare
x 12 x1
22
22
spare
x8 x1
OR
245cm/961/2 186cm / 731/4
245cm/961/2
18
186cm / 731/4
x2 x2 x2 x2 x2 x4
1
820
820
824
a
819
a b
818
b
824
817
b
825
b a
a b
825 818 819
820
b b
824 817
824
817
X2
25
26
25 L
25
x2
26
x2
2
L 26 R
R L R 820 25 L
900
L 25
900
a
26
R
820
900
26 R
900 900
820
820
820
900
820
821
x2
822
x2
UP
3
UP
a
822 821
822 821
UP
821
820 822
a b
821
UP
X2
822
816
x2
100
x1
4
a + b + c
816 816
a d
816
816
b
816 816
816
816
100
d 1
821
816
X2
822
813
x4
5
b
813 813
813
a b a a
813 813 820
813
813
X2
801
x2
a 1
801
6
801
801
801
801
a + b a + b
800 23
x2 x3
23
800
801
800
b
23
800
800
23
801
800
800
a
23
800
800
23
a
23
23
800
801
800
17
800
23
23
800
23
800 800
23
23
23
800
X2
23
800
23
23
x6
23
801
x4
800
x4
8
23
23
c c
23
801
2 1
800
800
b b b
23 801
23
23
23
800
23
23
801
a a
801
23
a
800
23 800
95
x1
9
a
95
95
95
800 800
95
801 801
a a
95
95
811
x2
812
x2
10
a a
811 811 812 812
811
812
811
812
X2
805
x1
806
x1
802
x2
11
a
806 802
2 1
802 805 806
802
b
805
a a b a
550
x5
12
550
a a b b a
550
550 550
b b a b
550 550
550
c c
550
1.
2.
x1 21 x1 x1 22 x1 x2
22
x4
21
13
c c c c
803 807 808
807
c
811
1
22
b
804
808
803
804
b b
d d
a b
c
21
21
21
21
810
x1
22
x2
22
14
c
810
a + b a + b
810
b
2
b
2
812 810
810 812
22
22
551
x2
552
x2
553
x1
15
551
a a c
552
553
551
b c b c c
552
554 809 x1
x1
22
x2
22
16
554
a
554
554 554
b b
809
2
809 809
22 2
22
22
22
555
x1
17
b
555
b a b
555
809
555
X2
99
x1
22 22
x2
22
18
554
2
99
22
1
99
809
1 b
22
550
x 15
19
550
550
b b
550
a a a a
550 550
X2
20
b b
23
a a
23
a a a
a b
23
23
815
x2
814
x4
21
a b
814
815
814
815
814
b
814
Click
823
x4
22
823
823
Click
823
a
823
823
a b
823
49A
x1 47 x2
447
x6
49B
x1 46 x2
450
x2
48
x2
43
x1
23
a
48
Click
46 48
447
c b
49B
49A
Click
47
49 49B
450
43
48
Click
447 47
X2
49A
833
x4
834
x1
24
Click
833
250
x4
447
x4
251
x2
252
x2
25
a + b c c
250 B02 251 250
b c a + b
447
250
250
252
252 250
c
250
a + b c
251 250
c c a + b
251
Click
26
96 96
x2 x2
96 96
x2 x2
c d
x2
x2 x2
x2
d
OR
245cm/961/2
18
245cm/961/2
186cm / 731/4
c=d
186cm / 731/4
c=d
35
x 28
35
27
35
35
b a b a b a a b b a b
a a b
35
35
X2
97
x2
28
a a
97 97
97
97 807 808
464
x8
422
x 16
465
x 16
29
a + b
7mm
422 x2
a + b a + b
465 x4
464 x2
464 x2
a + b
x4
556
x1
557
x1
28 44 29A 29B
x2 x1 x2
29B
x1
29B
30
29A
Click
Click
c b 44 29A 28 29B
Click
411
x8
462
x4
466
x8
31
11cm/ 45/16
a
466 x2
557
5cm/ 115/16 9cm/31/2
411 x2 462
556
a a
7.5cm/215/16
b b
x4
b
462
10mm
463
x4
32
10mm
a + b
a
463
557
a + b b
556
x4
a + b
461
x6
98A
x2
466
x6
33
98A 461 x3
a + b a + b b
466 x3
x2
98A
10mm
34
10mm
98A 557
1800
PUSH
PUSH
a + b
556
98A
1800
300
x1
35
a
557
b
463 556
463
461
x8
98B
x2
466
x8
36
10mm
98B
a + b a + b
466 x4
461 x4
x2
b
98B
x1 x2 x 12 x 12
37
a 1
10mm
459
459
a
461 x4 466 x4
461 x4 466 x4
PUSH
a 2
b
459
b
461 x4 466 x4
460
461 x4 466 x4
460
466 x2
460
466 x2
461
x4
826
x4
466
x8
411
x4
38
10mm
a a
411 826
a
466 826 826
x4
a
826
b b b
826
461 466
826