Professional Documents
Culture Documents
Grain & Feed Milling Technology is published six times a year by Perendale Publishers Ltd of the United Kingdom. All data is published in good faith, based on information received, and while every care is taken to prevent inaccuracies, the publishers accept no liability for any errors or omissions or for the consequences of action taken on the basis of information published. Copyright 2010 Perendale Publishers Ltd. All rights reserved. No part of this publication may be reproduced in any form or by any means without prior permission of the copyright owner. Printed by Perendale Publishers Ltd. ISSN: 1466-3872
www.gfmt.co.uk
NEXT PAGE
FEATURE
FEATURE
REDEFINED
feeding roller section can be accessed by opening the front door and the automatic sliding of the feeding rollers to the front and above and allows for easy cleaning.
Apart from conventional feeding systems, for which no practical or maximum cleaning could not be ensured in the most rapid way until today
on every machine without utilising any other external lifting mechanism; furthermore, in the assembling stage, all these details are realised with practical solutions without the use of any special tool. Hygienic conditions have been ensured to all internal surfaces at an utmost degree. Apart from conventional feeding systems,
24 | September - october 2011
for which no practical or maximum cleaning could not be ensured in the most rapid way until today, this device provides the opportunity to perform rapid cleaning in a maximum way. It uses either a vacuum cleaner or by wiping out up to the dismountable inlet compartment via its window. Note: this compartment can be opened forwards and upwards automatically and is easily cleaned by opening the cover on the top without performing any other process, thus the compartment is dismounted easily from underneath from the feeding roll and from the main rolls. User will not look into the machine from behind a glass cover anymore and must not open a glass cover for cleaning the external surface. This is a standard structure that can be applied to standard chassis on single-deck and double-deck models. Moreover, on the same body, a montage of 250mm and 300mm rolls can be implemented. Especially setting and positioning precision of roll spaces and the position repeat precision have achieved values that could not be accomplished before and this provides an opportunity of top setting automation on the same structure. However, although a feeding automation product level control is performed with several different methods, this has been dissolved with a user-friendly system requiring
no re-calibration for any other product. Practical use is enhanced through special software solutions, graphics and a touchscreen, which asked the question: what else would a wheat kernel, a miller, the companys boss or the end consumer wish for? Its power, durability, simplicity for being easily comprehended by anyone adds to its aesthetic, additional performances and additional efficiencies which are proven additional advantages.
For control purposes, an isolated door with double walls (Alapala design) is provided. This door operates with a weight system without a latch and it can be quickly mounted/dismounted without any bolted connection. For maximum hygiene, all surfaces are smooth to prevent dust catching and even the remotest parts are designed to allow easy access and quick cleaning. Especially the inaccessible chamber in
A dispensing hoe is provided at the back for evenly distributing the product on the roller surface and a feeding system, equipped with specially profiled spreader cylinder and manually adjusted trap-door for setting the spreading thickness of the product, is provided at the front. In single- and double-deck models of Similago the same frame is used for 250mm and 300mm diameter rollers.
Grain
Corrugated
Customised industrial bags for quick lling and reliable Food Industry protection of your lling goods. Industrial Household Medical &
Industry Paper & Packaging Industry Pharmaceutical Industry
Pet Ind
This digital Re-print is part of the September | October 2011 edition of Grain & Feed Milling Technology magazine. Content from the magazine is available to view free-of-charge, both as a full online magazine on our website, and as an archive of individual features on the docstoc website. Please click here to view our other publications on www.docstoc.com.
LINKS
October
2011
Visit the GFMT website Contact the GFMT Team Subscribe to GFMT
A subscription magazine for the global flour & feed milling industries - first published in 1891
GFMT11.05.indd 1 04/10/2011 15:14
To purchase a paper copy of the magazine, or to subscribe to the paper edition please contact our Circulation and Subscriptions Manager on the link adove.
Article reprints
All Grain & Feed Milling Tecchnology feature articles can be re-printed as a 4 or 8 page booklets (these have been used as point of sale materials, promotional materials for shows and exhibitions etc). If you are interested in getting this article re-printed please contact the GFMT team for more information on - Tel: +44 1242 267707 - Email: jamest@gfmt.co.uk or visit www.gfmt.co.uk/reprints
www.gfmt.co.uk
PREVIOUS PAGE