Professional Documents
Culture Documents
Basic guide
P. 2
INSTRUCTION MANUAL
Review the camera part names and the basic steps for shooting and playback.
Table of Contents P. 20
Before you start to use your new camera, please read the Safety Precautions section in this manual. We recommend that you take test shots to get accustomed to your camera before taking important photographs. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. The contents in this manual are based on firmware version 1.0 for this camera. If there are addition and/or modification of functions due to firmware update for the camera, the contents will differ. For the latest information, please visit the Olympus website.
Camera
Mode dial gP. 4 Power switch gP. 14 Control dial (j) gP. 19, 26 F (Exposure compensation) button gP. 48 Shutter button gP. 16, 31 Built-in flash gP. 73 Hot shoe gP. 75 # (flash) button gP. 73 j/Y/< (Sequential shooting/ Self-timer/Remote control) button gP. 57-60, 92 COPY/< (Copy/Print) button gP. 86, 102
Lens attachment mark gP. 12 Mount (Attach the lens after removing the body cap from the camera to prevent dust and dirt from entering the camera body.)
Mirror gP. 37
2
EN
Basic guide
Eyecup gP. 58 Viewfinder gP. 6 LCD monitor gP. 8, 9, 36 q (Playback) button gP. 79 S (Erase) button gP. 88 MENU button gP. 29 INFO (Information display) button gP. 28, 40, 79
Diopter adjustment dial gP. 14 AEL/AFL button gP. 37, 49, 90 0 (Protect) button gP. 87 o (Image stabilizer) button gP. 60 < button gP. 91 P (AF target) button gP. 54 u (Live view) button gP. 36 Arrow pad gP. 27, 29 i button gP. 29
Tripod socket
Card cover gP. 13 Card access lamp gP. 13, 16, 108 CF card slot gP. 13 xD-Picture Card slot gP. 13
Connector cover
3
EN
Mode dial
The mode dial allows you to change the camera settings easily according to the subject.
AUTO i l & j /
Scene mode
4
EN
Basic guide
For more advanced shooting and greater creative control, you can set the aperture value and shutter speed. The settings made in the advanced shooting modes are retained even if the camera is turned off. P A S M Program shooting Aperture priority shooting Shutter priority shooting Manual shooting Allows you to shoot using an aperture and shutter speed that the camera sets. (gP. 43) Allows you to set the aperture manually. The camera sets the shutter speed automatically. (gP. 44) Allows you to set the shutter speed manually. The camera sets the aperture automatically. (gP. 44) Allows you to set the aperture and shutter speed manually. (gP. 45)
5
EN
Viewfinder
AF target gP. 54
Aperture value gP. 43-46 Shutter speed gP. 43-46 Flash gP. 70 (blinks: charging in progress, lights up: charging completed)
White balance (Displayed when set to a setting other than auto white balance.) gP. 64
AE lock gP. 49
Exposure compensation value gP. 48 Metering mode gP. 47 Shooting mode gP. 4
6
EN
Date gP. 15
250
2008. 08.16
F5.6 +2.0
FP BKT RC IS 2 AF
OFF
arge Normal
Card gP. 121 Record mode gP. 62 Face detection gP. 39
Color space gP. 96 Number of storable still pictures gP. 128 Sharpness N gP. 67 Contrast J gP. 67 Saturation T gP. 67 Gradation z gP. 68 B&W filter x gP. 67 Picture tone y gP. 67 Metering mode gP. 47
AF mode gP. 52 AF target gP. 54 Flash intensity control gP. 74 Flash mode gP. 70 Remote control/Self-timer/Sequential shooting gP. 57-60 ISO sensitivity gP. 51 White balance gP. 64 White balance compensation gP. 65
The functions within this area can be set on the super control panel.
7
EN
38
Histogram gP. 116 AF target gP. 54
LN
Number of storable still pictures gP. 128 Record mode gP. 62 Card gP. 121 ISO sensitivity gP. 51 Sequential shooting gP. 57 Self-timer gP. 58 Remote control gP. 58 White balance gP. 64
Internal temperature warning gP. 118 Face detection g gP. 39 Flash intensity control gP. 74
8
EN
Aperture value gP. 43-46 Print reservation Number of prints gP. 100
Protect gP. 87
LN
x10 [3648x2736,1/8]
1/250 F5.6 +2.0 45mm ISO 100 0.0 WB : AUTO A : 0 G: 0 NATURAL sRGB
15
Shooting information Frame number gP. 82
LN
Record mode gP. 62 Color space gP. 96 Picture mode gP. 67
AF target gP. 54 Histogram gP. 82 Metering mode gP. 47 White balance gP. 64 White balance compensation gP. 65 Flash intensity control gP. 74 ISO sensitivity gP. 51
9
EN
Camera
Body cap
Strap
USB cable
Video cable
Instruction manual
Warranty card
Eyepiece cover
Lastly, pull the strap tight making sure that it is fastened securely (3).
Attach the other end of the strap to the other eyelet in the same way.
10
EN
Charging indicator Red light: Charging in progress Green light: Charging completed (Charging time: Approx. 5 hours)
BCM-2 Lithium ion charger AC cable Align the battery with the arrow. AC wall outlet
Close the battery compartment cover and slide the battery compartment lock in the direction of E
Battery lock
It is recommended to set aside a backup battery for prolonged shooting in case the battery in use drains.
11
EN
1 2 1
Rear cap
2
Body cap Lens attachment mark (Red)
Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the cameras body (1). Rotate the lens in the direction indicated by the arrow until you hear it click (2). Make sure the power switch is set to OFF. Do not press the lens release button.
2 3 1
4 3
Lens cap
2 1
Lens release button
12
EN
xD-Picture Card
Open the card cover. Insert the card until it is locked into place.
Card cover
CF card slot
mark
Never open the card cover while the card access lamp is blinking.
CompactFlash/Microdrive
Press the eject button all the way in to make it pop out. Press the eject button again all the way in to eject the card. Pull out the card.
xD-Picture Card
Press the inserted card lightly and it will be ejected. Pull out the card.
Eject button
13
EN
Power on
1
Set the cameras power switch to ON.
Mode dial
Power switch
INFO button
AUTO
2008. 08.16
AF
LCD monitor
When the camera is turned on, the super control panel screen is displayed on the monitor. If the super control panel screen does not appear, press the INFO button.
OFF
arge Normal
Super control panel Dust reduction function operation The dust reduction function is automatically activated when the camera is turned on. Ultrasonic vibrations are used to remove dust and dirt from the image pickup devices filter surface. The SSWF (Super Sonic Wave Filter) indicator blinks while dust reduction is working.
Viewfinder
AF target
14
EN
MENU button
NORM N AUTO GO
Repeat this procedure until the date and time are completely set
M D
TIME Y/M/D
2008 08 01 14 00
CF
j0 k0
CANCEL
GO
ENG. NTSC GO
M D
TIME Y/M/D
2008 08 01 14 00
M D
TIME Y/M/D
CANCEL
GO
CANCEL
CF
j0 k0
ENG. NTSC GO
Y 2008
M D
TIME Y/M/D
CANCEL
15
EN
Shooting
1
Viewfinder
Place the AF target on the subject while viewing through the viewfinder
Shutter button
AUTO
Shutter speed
250
F5.6
AF
2008. 08.16
OFF
arge Normal
The focus is locked when a beep tone is output. The AF confirmation mark and the AF target in focus light up in the viewfinder. The shutter speed and aperture value that have been set automatically by the camera are displayed. The super control panel is not displayed while the shutter button is pressed.
The shutter sounds and the picture is taken. The card access lamp blinks and the camera starts recording the picture.
Never remove the battery or card while the card access lamp is blinking. Doing so could destroy stored pictures and prevent storage of pictures you have just taken.
16
EN
Basic guide
Horizontal grip
Vertical grip
It is possible to use the LCD monitor as a viewfinder and check the subjects composition, or shoot while viewing an enlarged display on the LCD monitor. gUsing live view (P. 36)
Shutter button
250 F5.6
2
38
LN
17
EN
Playback/Erasing
Playing back images
q button
Displays the previous frame Arrow pad Displays the frame that is stored 10 frames ahead
Close-up playback
Each time you turn the control dial towards U, the image is incrementally enlarged from 2 to 14.
Control dial
Erasing images
Play back the image you want to erase and press the S button. Use ac to select [YES] and press the i button to erase.
S button
ERASE
18
EN
x Notes
TIPS
g
To make the most of this manual You can use the Table of Contents (P. 20) or Index (P. 145) as well as the following reference to search for information on camera functions and operations. Use this manual according to shooting conditions and to find the desired information. For information on the possible shooting functions: gShooting guides (P. 31) For information on how to operate the camera: gUsing the direct buttons (P. 27) Using the super control panel (P. 28) Using the menu (P. 29) Functions available during live view: gUsing live view (P. 36) To search for a function from a list: gMenu directory (P. 130) Index (P. 145)
Table of Contents
Basic guide
Identifies the camera part names and describes the basic steps for shooting and playback.
Names of parts and functions........................................................................................ 2 Camera ......................................................................................................... 2 Mode dial....................................................................................................... 4 Viewfinder ..................................................................................................... 6 Super control panel ....................................................................................... 7 LCD monitor (Live view)................................................................................ 8 LCD monitor (Playback) ................................................................................ 9 Unpack the box contents............................................................................. 10 Preparations for shooting ............................................................................................ 11 Preparing the battery................................................................................... 11 Attaching a lens to the camera.................................................................... 12 Loading the card ......................................................................................... 13 Power on ..................................................................................................... 14 Setting the date/time ................................................................................... 15 Shooting ...................................................................................................... 16 Playback/Erasing ........................................................................................ 18 Indications used in this manual ................................................................... 19
26
Using the direct buttons............................................................................................... 27 Using the super control panel...................................................................................... 28 Using the menu ........................................................................................................... 29 Resetting to the factory default settings ...................................................................... 30
Basic function guides................................................................................................... 31 Focus k Operating the shutter button........................................................ 31 Brightness k Exposure compensation....................................................... 31 Color k White balance............................................................................... 32 Convenient settings k Customizing functions ........................................... 32 A guide to functions for different subjects.................................................................... 32 Taking landscape pictures .......................................................................... 32 Taking flower pictures ................................................................................. 34 Taking night scene pictures ........................................................................ 35
20
EN
36
Activating live view ......................................................................................................36 Functions available during live view ............................................................36 The live view mechanism ............................................................................37 Taking a picture using live view ...................................................................................37 AF operation during live view ......................................................................38 Using the face detection function ................................................................................39 Taking a picture using manual focus ...........................................................................40 Switching the information display ................................................................................40 Taking a picture while comparing the effect ................................................................41 Enlarged display operation ..........................................................................................41 Panorama shooting .....................................................................................................42
4 Exposure
43
Describes functions related to exposure, which is important for shooting. These functions are for determining the aperture value, shutter speed, and other settings by measuring the brightness in the picture.
Program shooting ........................................................................................................43 Aperture priority shooting ............................................................................................44 Shutter priority shooting...............................................................................................44 Manual shooting ..........................................................................................................45 Bulb shooting...............................................................................................46 Preview function ..........................................................................................................47 Changing the metering mode ......................................................................................47 Exposure compensation ..............................................................................................48 AE lock ........................................................................................................................49 AE bracketing ..............................................................................................................50 ISO sensitivity setting ..................................................................................................51
52
Describes the optimal focusing methods according to the subject and shooting conditions.
AF mode selection .......................................................................................................52 S-AF (single AF)..........................................................................................52 C-AF (continuous AF)..................................................................................53 MF (manual focus) ......................................................................................53 Simultaneous use of S-AF mode and MF mode (S-AF+MF) ......................53 Simultaneous use of C-AF mode and MF mode (C-AF+MF) ......................53 AF target selection.......................................................................................................54 Registering the AF target position ...............................................................55 Focus lock k If correct focus cannot be obtained ......................................................56 Sequential shooting .....................................................................................................57 Self-timer shooting.......................................................................................................58 Remote control shooting..............................................................................................58
21
EN
Anti-shock.................................................................................................................... 60 Image stabilizer ........................................................................................................... 60 Checking the image stabilizer effect with live view ..................................... 61
62
Selecting the record mode........................................................................................... 62 Recording formats....................................................................................... 62 Selecting the record mode .......................................................................... 63 Selecting the white balance......................................................................................... 64 Setting the auto/preset/custom white balance ............................................ 65 WB compensation ....................................................................................... 65 Setting the one-touch white balance ........................................................... 66 WB bracketing ............................................................................................................. 67 Picture mode ............................................................................................................... 67 Gradation..................................................................................................................... 68 Noise reduction............................................................................................................ 69 Noise filter.................................................................................................................... 69
7 Flash shooting
Describes how to shoot with the built-in flash and an external flash.
70
Flash mode setting ...................................................................................................... 70 Built-in flash shooting .................................................................................................. 73 Flash intensity control.................................................................................................. 74 Flash bracketing .......................................................................................................... 74 External flash shooting ................................................................................................ 75 Shooting with the Olympus wireless RC flash system................................................. 76 Using commercially available flashes.......................................................................... 78
8 Playback functions
Describes the functions for image playback.
79
Single-frame/Close-up playback.................................................................................. 79 Light box display.......................................................................................................... 80 Index display/Calendar display.................................................................................... 81 Information display ...................................................................................................... 82 Slideshow .................................................................................................................... 83 Rotating images........................................................................................................... 83 Playback on TV ........................................................................................................... 84 Editing still images....................................................................................................... 84 Copying images........................................................................................................... 86 Protecting images........................................................................................................ 87 Erasing images............................................................................................................ 88
22
EN
89
Custom Menu 1 ...........................................................................................................89 a AF/MF .....................................................................................................................89 AF ILLUMINAT. ...........................................................................................89 FOCUS RING..............................................................................................89 RESET LENS ..............................................................................................89 BULB FOCUSING .......................................................................................89 LIVE VIEW AF MODE .................................................................................89 b BUTTON/DIAL ........................................................................................................89 DIAL FUNCTION.........................................................................................89 DIAL DIRECTION........................................................................................90 AEL/AFL ......................................................................................................90 AEL/AFL MEMO..........................................................................................91 ; FUNCTION...........................................................................................91 j FUNCTION ...........................................................................................92 MY MODE SETUP ......................................................................................92 BUTTON TIMER .........................................................................................92 A........................................................................................................92 n (arrow pad) LOCK................................................................................92 c RELEASE/j.........................................................................................................93 RLS PRIORITY S/RLS PRIORITY C ..........................................................93 d DISP/8/PC............................................................................................................93 8................................................................................................................93 SLEEP.........................................................................................................93 BACKLIT LCD (Backlight timer) ..................................................................93 4 h TIMER (Auto power off).........................................................................93 USB MODE .................................................................................................93 LIVE VIEW BOOST.....................................................................................94 g FACE DETECT ......................................................................................94 FRAME ASSIST (Ruled lines display).........................................................94 e EXP/e/ISO ..........................................................................................................94 EV STEP .....................................................................................................94 ISO-AUTO SET ...........................................................................................94 ISO-AUTO ...................................................................................................94 AELMetering................................................................................................95 BULB TIMER...............................................................................................95 f # CUSTOM............................................................................................................95 #X-SYNC. ..................................................................................................95 #SLOW LIMIT ............................................................................................95 w+F .........................................................................................................95 AUTO POP UP............................................................................................95
23
EN
g K/COLOR/WB...................................................................................................... 95 ALL >..................................................................................................... 95 COLOR SPACE .......................................................................................... 96 SHADING COMP. ....................................................................................... 96 K SET....................................................................................................... 96 PIXEL COUNT ............................................................................................ 96 h RECORD/ERASE ................................................................................................... 96 QUICK ERASE............................................................................................ 96 RAW+JPEG ERASE ................................................................................... 97 FILE NAME ................................................................................................. 97 PRIORITY SET ........................................................................................... 97 dpi SETTING............................................................................................... 97 i K UTILITY ............................................................................................................ 98 CLEANING MODE ...................................................................................... 98 CU/HI ............................................................................................. 98 Custom Menu 2 ........................................................................................................... 98 X (Date/time setting) ................................................................................ 98 CF/xD .......................................................................................................... 98 EDIT FILENAME ......................................................................................... 98 s (Monitor brightness adjustment)........................................................... 98 W (Changing the display language) ...................................................... 98 VIDEO OUT ................................................................................................ 99 REC VIEW .................................................................................................. 99 PIXEL MAPPING ........................................................................................ 99 FIRMWARE................................................................................................. 99
10 Printing
Describes how to print your pictures.
100
Print reservation (DPOF) ........................................................................................... 100 Print reservation ........................................................................................ 100 Single-frame reservation ........................................................................... 100 All-frame reservation ................................................................................. 101 Resetting the print reservation data .......................................................... 101 Direct printing (PictBridge)......................................................................................... 102 Connecting the camera to a printer........................................................... 103 Easy printing ............................................................................................. 103 Custom printing ......................................................................................... 104
106
24
EN
Flowchart ................................................................................................................... 106 Using the provided OLYMPUS Master software ....................................................... 106 What is OLYMPUS Master?...................................................................... 106 Connecting the camera to a computer ...................................................................... 107 Start up the OLYMPUS Master software................................................................... 108
Displaying camera images on a computer ................................................................108 Downloading and saving images...............................................................108 Disconnecting the camera from your computer.........................................108 Viewing still images ...................................................................................................109 To increase the number of languages .......................................................................110 Transferring images to your computer without using OLYMPUS Master ..................110
111
Shooting tips and information ....................................................................................111 Tips before you start taking pictures .........................................................111 Shooting tips..............................................................................................111 Additional shooting tips and information....................................................114 Playback tips .............................................................................................116 Viewing pictures on a computer ................................................................116 Error codes ................................................................................................................117 Camera maintenance ................................................................................................119 Cleaning and storing the camera ..............................................................119 Cleaning mode k Removing dust ............................................................120 Pixel mapping k Checking the image processing functions ....................120
13 Information
121
Refer to this section for information on optional accessories, camera specifications, and other useful shooting information.
Card basics................................................................................................................121 Usable cards .............................................................................................121 Formatting the card ...................................................................................121 Battery and charger ...................................................................................................122 Using your charger abroad ........................................................................................122 Interchangeable lenses .............................................................................................122 ZUIKO DIGITAL interchangeable lens ......................................................122 ZUIKO DIGITAL lens specifications ..........................................................123 Program line diagram (P mode) ................................................................................125 Exposure warning display..........................................................................................125 Flash modes that can be set by shooting mode ........................................................126 White balance color temperature...............................................................................127 Record mode and file size/number of storable still pictures ......................................128 Functions that can be registered with My Mode and Custom Reset Setting .............129 Menu directory ...........................................................................................................130 Glossary ....................................................................................................................133 Specifications ............................................................................................................136 SAFETY PRECAUTIONS..........................................................................................139 Index ..........................................................................................................................145
25
EN
1
Basic camera operations
26
EN
1
Basic camera operations
SELECT
Direct menu
GO
4 5 9
j You can also assign frequently used functions to the < and j/Y/< buttons. g; FUNCTION (P. 91), j FUNCTION (P. 92)
27
EN
Press the INFO button to display the super control panel on the LCD monitor.
Press the INFO button again to turn off the super control panel. Press the i button during live view to display the super control panel.
Control dial
1
Basic camera operations
2008. 08.16
AF
arge Normal
p Arrow pad
ISO
METERING
OFF
OFF
arge Normal
arge Normal
Cursor
METERING
SELECT
Direct menu
GO
For details on the functions that can be set with the super control panel, refer to Super control panel (gP. 7).
28
EN
NORM N AUTO GO
i button
1
Basic camera operations
MENU button
p Arrow pad
Operation guide is displayed at the bottom of the screen. CANCEL MENU : Press the MENU button to cancel the setting.
SELECT
GO OK
: Press dac on the arrow pad to move the cursor and select an item. The symbols displayed on the LCD monitor correspond to the arrow pad shown below. t: a u: c 8: d 7: b : Press the i button to confirm your settings.
CANCEL
SELECT
Tab
Function
Types of tabs W (Shooting menu 1) Sets shooting functions. X (Shooting menu 2) Sets shooting functions. q (Playback menu) Sets playback functions. Y (Custom menu 1) Customizes shooting functions. Depending on the function being customized, the function is further separated into 9 tabs (A to I). Z (Custom menu 2) Sets the basic functions of the camera.
SELECT
GO
For details on the functions that can be set with the menu, refer to Menu directory (gP. 130).
29
EN
1
Basic camera operations
1 2
Using reset settings You can reset the camera to [RESET1] or [RESET2] setting or restore the factory default settings. [RESET] : Resets to the factory default settings. For the default settings, see Menu directory (gP. 130). [RESET1]/[RESET2] : Resets to the registered settings. Menu MENU [W] [CUSTOM RESET]
RESET1
1 2
Select [RESET], [RESET1] , or [RESET2] and press the i button. Use ac to select [YES], then press the i button.
YES NO
CANCEL
SELECT
GO
30
EN
2
Shooting guides k Improving your shooting skills
gShooting (P. 16), Focus lock k If correct focus cannot be obtained (P. 56) Even when the subject is in focus, the picture can become blurred if you move the camera while the shutter button is being pressed. This is called camera shake. Make sure how to properly hold the camera. The camera is particularly subject to shaking when using live view to take pictures while viewing the subject on the monitor. You can reduce camera shake by using the image stabilizer. gHolding the camera (P. 17), Image stabilizer (P. 60) In addition to incorrect focusing and camera shake, movement of the subject can also cause blurring of the picture. In this case, use a shutter speed that matches the motion of the subject. You can confirm the actual shutter speed and aperture on the displays of the viewfinder and monitor by pressing the shutter button halfway. gViewfinder (P. 6), Super control panel (P. 7), LCD monitor (Live view) (P. 8)
31
EN
2
Shooting guides k Improving your shooting skills
32
EN
Changing shooting mode The proper shooting method varies depending on whether you are trying to capture the silence of a still scene or the dynamism of a motion scene. To capture the depth of a forest, focus with a wider range of the image. Use A (aperture priority shooting) mode and close the aperture (increase the aperture value) as much as possible. To capture the waves crashing against the seashore, use S (shutter priority shooting) mode and select a fast shutter speed. To capture a flowing waterfall or river, shoot using a slow shutter speed. Exposure compensation can be used even under different shooting modes. Check the image that you have shot and use + or to adjust the exposure to obtain better results. Changing white balance The color of water in pictures appears different depending on whether it is a lake reflecting nearby trees or a seashore surrounded by a coral reef. To capture the subtle difference in color, try changing the white balance setting. Change the setting for different situations, such as by using [55300K] for sunny days and [27500K] for outdoor shaded areas on sunny days. Changing metering mode Depending on the depth of the water and the direction of the sun, the brightness of the water can differ significantly in different areas of the same composition. There is also a difference in the brightness of forests depending on the way the trees overlap each other. If you know which areas you want to emphasize the compensation in the image composition, you can change the metering mode. When set to [e] (Digital ESP metering), the camera automatically assesses the brightness in the composition and determines the exposure. To emphasize a specific partial exposure in the composition, change the metering mode to [J] (center weighted metering) or [n] (spot metering), adjust the metering area to the locations that you want to adjust the exposure and then measure the exposure. Changing saturation There may be times when you cannot reproduce the desired color even when using white balance or exposure compensation. In this case, you can change the [SATURATION] setting to achieve the desired color. The [SATURATION] setting includes two levels of high and low settings. When the setting is high, a vivid color is used. gAperture priority shooting (P. 44), Shutter priority shooting (P. 44), Changing the metering mode (P. 47), Exposure compensation (P. 48), Selecting the white balance (P. 64), [SATURATION] : Vividness of the color (P. 68)
2
Shooting guides k Improving your shooting skills
33
EN
2
Shooting guides k Improving your shooting skills
Changing shooting mode The proper shooting method when taking pictures of flowers differs depending on whether you want to emphasize a single flower or capture a field of flowers. To change the focus area, set the camera to A (aperture priority shooting) mode and select the aperture value. When you open the aperture (decrease the aperture value), the camera focuses within a shorter range (with a shallow depth of field), emphasizing the subject against a blurred background. When you close the aperture (increase the aperture value), the camera focuses over a wider range (with more depth of field), producing a picture with both the foreground and background in focus. You can use the preview function to confirm the changes in the depth of field when the aperture is changed. Using live view When using a conventional digital single-lens reflex camera with interchangeable lens system, it was necessary to wait until after taking the picture to check the results of the exposure compensation and white balance settings. With the live view function of this camera, however, you can use the monitor to display and check the subject you want to capture.
34
EN
Changing lenses When the blooming flowers are few and sparse, take the picture using a telephoto lens. With a telephoto lens, you take pictures in which subjects at different distances appear closer together, giving the impression of a more densely blooming flower field. Using the telescopic feature of the zoom lens also achieves the same effect, but it is easier to achieve this effect when the focal length of the lens is longer, such as 150 mm or 200 mm, rather than 54 mm. gAperture priority shooting (P. 44), Using live view (P. 36), Exposure compensation (P. 48), Selecting the white balance (P. 64)
2
Shooting guides k Improving your shooting skills
Changing shooting mode Night scenes have different levels of brightness, and the balance of the brightness in the composition is not uniform. Start by using A (aperture priority shooting) mode to take the picture. Set the aperture to the medium setting (about F8 or F11) and allow the camera to automatically select the shutter speed. When shooting a night scene, because the camera sets the exposure to match the dark areas which occupy a majority of the composition and the image often turns out whitish (overexposed), adjust the exposure compensation to -1 or -1.5. Use [REC VIEW] to check the image and adjust the aperture and exposure compensation as necessary. Image noise can easily occur when shooting at slow shutter speeds. In this case, set [NOISE REDUCT.] to [ON] to reduce noise. Using manual focus In cases where you cannot use AF (auto focus) to focus on the subject because the subject is too dark or you cannot focus in time to take pictures, such as during a fireworks display, set the AF mode to [MF] (manual focus) and focus manually. To take pictures of night scenes, turn the focus ring of the lens and check whether you can see the lights of the night scene clearly. To take pictures of a fireworks display, adjust the focus of the lens to infinite unless you are using a long focus lens. If you know the approximate distance to the subject, it is recommended that you focus on something that is at the same distance in advance. gProgram shooting (P. 43), Aperture priority shooting (P. 44), Remote control shooting (P. 58), AF mode selection (P. 52), Noise reduction (P. 69), REC VIEW (P. 99)
35
EN
3
Using live view
u button
gP. 41
Notes
If there is a high-intensity light source within the screen, the image may be displayed darker but will be recorded normally. If the live view function is used over a long period, the temperature of the image pickup device rises causing images with high ISO sensitivity to appear noisy and unevenly colored. Either lower the ISO sensitivity or turn off the camera for some time. Exchanging the lens will cause live view to stop. The following functions are not available during live view. C-AF/AE lock/[AEL/AFL]
36
EN
3
Using live view
Mirror Lens
The light coming in through the lens is reflected on the mirror and you can check the subject in the viewfinder.
The mirror is raised and the shutter is open. The image received by image pickup device is displayed on the LCD monitor.
HYBRID AF
None
3 AF targets
* For the latest information about Olympus lenses compatible with Imager AF, visit the Olympus website. When you are using a lens that is not compatible with [IMAGER AF], [HYBRID AF] will be selected automatically.
37
EN
1 2
AF confirmation mark
250 F5.6
I-AF
38
AF target mark
LN
3
Using live view
AF confirmation mark
250 F5.6
38
LN
1 2
n mark
250 F5.6
38
AF operation during live view
[IMAGER AF] When you press the shutter button halfway, AF is performed by the image pickup device. 11 available AF targets allow you to focus on a subject even if it does not appear in the center of the picture. [AF SENSOR] When you press the shutter button all the way, the AF is activated and the picture is taken in the same way as when taking pictures using the viewfinder (AF is not activated on pressing the shutter button halfway).
38
EN
[HYBRID AF] When you press the shutter button halfway, focusing is performed approximately by the Imager AF and you can check the subject on the LCD monitor. When you press the shutter button all the way, the AF is activated in the same way as with the [AF SENSOR] setting. The approximate focusing distance is obtained when the shutter button is pressed halfway so the time it takes to actually take the picture after pressing the shutter button all the way is shortened. When using S-AF+MF, this is very convenient as you can hold the shutter button pressed halfway and finely adjust the focus while checking the LCD monitor. Camera status during AF
Imager AF Halfway down AF Sensor All the way down
3
Using live view
AF Sensor
The mirror is lowered and AF is performed by the AF sensor. (The mirror is down so the image display on the monitor freezes just before pressing the shutter button all the way.)
MENU
In order to use the < button, [Fn FACE DETECT] needs to be set up in the menu in advance. g; FUNCTION (P. 91) After setting [g FACE DETECT] to [ON] while using the < button, the following functions are automatically set to the best settings for taking pictures of people.
Function METERING GRADATION LIVE VIEW AF MODE AF MODE Setting e AUTO IMAGER AF S-AF (B) Ref. page P. 47 P. 68 P. 37 P. 52
39
EN
250 F5.6
Notes
During sequential shooting, face detection will work only at the first shot. Depending on the subject, the camera may not be able to correctly detect the face.
38
LN
3
Using live view
During live view, you can take a picture focusing manually while checking the focus on the LCD monitor.
1 2
Set the AF mode to [S-AF+MF] or [MF]. gAF mode selection (P. 52) Adjust the focus by rotating the focus ring.
In [S-AF+MF] mode, after pressing the shutter button halfway or pressing the AEL/AFL button, you can rotate the focus ring to finely adjust the focus before taking the picture. Using the enlarged display can be very convenient when adjusting the focus manually. gEnlarged display operation (P. 41)
38
LN
38
38
250 F5.6
0.0
+0.3
+0.7
+1.0 GO
38
WB/F
40
EN
0.0
+0.3
2
x
Use bd or the control dial to select the setting value, then press the i button.
You can take the picture using the set value.
+0.7 WB/F
+1.0 GO
Notes
Exposure compensation is not available in M mode. This function cannot be used in g mode.
3
Using live view
i button
38
1 2 3
41
EN
Panorama shooting
You can enjoy panorama shooting easily using the OLYMPUS xD-Picture Card. Using OLYMPUS Master (provided CD-ROM) to join a few images shot where the subjects edges overlap, you can create a single panorama composite image. Panorama shooting is possible up to a maximum of 10 images.
250 F5.6 [2] [3]
38
EXIT
EXIT
3
Using live view
Try your best to include the common parts of the overlapping images when shooting the subject.
1 2
Use p to specify the direction for joining, then shoot the subject with the edges overlapping.
d : Joins the next image to the right. b : Joins the next image to the left. a : Joins the next image to the top. c : Joins the next image to the bottom. Shoot while changing the composition such that the subject overlaps. The focus, exposure, etc. will be determined at the first shot. The g (warning) mark will be displayed after you have finished taking 10 shots. Pressing the i button before shooting the first frame returns to the scene mode selection menu. Pressing the i button in the midst of shooting ends the sequence of panorama shooting, and allows you to continue with the next one.
Notes
Panorama shooting cannot be done if the OLYMPUS xD-Picture Card is not loaded in the camera. During panorama shooting, the image previously taken for position alignment will not be retained. With the frames or other markers for display in the images as a guide, set the composition such that the edges of the overlapping images overlap within the frames.
42
EN
Exposure
Program shooting
The camera sets the optimum aperture value and shutter speed automatically according to the subject brightness. Set the mode dial to P. When the shutter button is half-pressed, the shutter speed and aperture value are displayed on the viewfinder. Releasing the shutter button displays the shutter speed and aperture value on the super control panel screen.
Aperture value
250
2008. 08.16
F5.6
AF
Shutter speed
AF confirmation mark
4
Exposure
OFF
arge Normal
Viewfinder
Program shift (%) By turning the control dial in the P mode, you can change the combination of aperture and shutter speed while maintaining the optimum exposure. gProgram line diagram (P mode) (P. 125) The program shift setting will not be canceled after shooting. To cancel program shift setting, turn the control dial until the shooting mode indication % on the viewfinder or super control panel changes to P or turn off the power. Program shift is not available when you are using a flash.
TIPS j The optimum exposure cannot be obtained. For details, see Exposure warning display (gP. 125).
Program shift
43
EN
4
Exposure
Set the mode dial to A and turn the control dial to set the aperture value.
Aperture value Open the aperture (f-number is decreased)
Shutter speed
AF confirmation mark Shooting mode Viewfinder Close the aperture (f-number is increased)
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. gEV STEP (P. 94) j The optimum exposure cannot be obtained. For details, see Exposure warning display (gP. 125).
44
EN
Set the mode dial to S and turn the control dial to set the shutter speed.
Aperture value Slower shutter speed
Shutter speed
TIPS
j The possibility of camera shake spoiling your picture increases greatly during macro or ultratelephoto shooting. Raise the shutter speed or use a monopod or tripod to stabilize the camera. j When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera shake by using the image stabilizer. gImage stabilizer (P. 60)
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. gEV STEP (P. 94) j The optimum exposure cannot be obtained. For details, see Exposure warning display (gP. 125).
4
Exposure
Manual shooting
Allows you to set the aperture and shutter speed manually. You can check how much it differs from the appropriate exposure by using the exposure level indicator. This mode gives you more creative control, allowing you to make whatever settings you like, regardless of the correct exposure. Set the mode dial to M and turn the control dial to set the value. Shutter speed : Turn the control dial to set the value. Aperture value: Turn the control dial while holding down the F button to set the value. The range of aperture values available varies with the lens type. The shutter speed can be set to 1/4000 - 60 sec. or [BULB].
Open the aperture (f-number is decreased) F button Slower shutter speed
In M mode the exposure level indicator will appear on the super control panel screen. It shows the difference (ranging from -3 EV to +3 EV) between the exposure value calculated by the currently selected aperture and shutter speed and the exposure value considered optimum by the camera. If the difference exceeds 3 EV, vw will appear in red on both sides of the indicator.
45
EN
M
2008. 08.16
250
F5.6 -0.3
arge Normal
4
Exposure
Noise in images During shooting at slow shutter speeds, noise may appear on-screen. These phenomena are caused when current is generated in those sections of the image pickup device that are not normally exposed to light, resulting in a rise in temperature in the image pickup device or image pickup device drive circuit. This can also occur when shooting with a high ISO setting in a high-temperature environment. To reduce this noise, the camera activates the noise reduction function. gNoise reduction (P. 69)
TIPS
j The use of a monopod or tripod is recommended when taking a picture at slow shutter speed. j When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera shake by using the image stabilizer. gImage stabilizer (P. 60)
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. gEV STEP (P. 94)
To switch the operation between setting the shutter speed and aperture value:
j You can set the aperture value using only the control dial. gDIAL FUNCTION (P. 89)
Notes
Exposure compensation is not available in M mode.
Bulb shooting
You can take a picture with a bulb exposure time in which the shutter stays open as long as you hold down the shutter button. Bulb shooting can also be done using an optional remote control (RM-1). gBulb shooting with the remote control (P. 60) In M mode, set the shutter speed to [BULB]. [buLb] is displayed in the viewfinder and [BULB] on the super control panel.
TIPS j You can set the maximum time for bulb shooting. gBULB TIMER (P. 95)
j You can fix the focus so the focus does not change even if the focus ring is turned during exposure. gBULB FOCUSING (P. 89)
Notes
The following functions are not available during bulb shooting. Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/flash bracketing
46
EN
Preview function
The viewfinder shows the focused area (depth of field) with the selected aperture value. For the preview function to work by pressing the < button, it is necessary to set the function of the < button on the menu beforehand. g; FUNCTION (P. 91) Press the < button to use the preview function. When [; FUNCTION] is assigned to [LIVE PREVIEW], pressing the < button automatically switches the camera to live view for a preview of the picture on the monitor.
< button
4
Exposure
MENU
Setting display You can check the settings in the viewfinder while using the d button to make the settings.
: Digital ESP metering : Center weighted averaging metering : Spot metering : Spot metering Highlight control : Spot metering Shadow control
METERING
Viewfinder
SELECT
GO
The camera measures the light levels and calculates the light level differences in 49 separate areas of the image. This mode is recommended for general use. Setting the AF synchronized function to [ESP+AF] enables metering centered around the AF target that is in focus with AF.
47
EN
n Spot metering
The camera meters a very small area around the center of the subject, defined by the spot metering area mark in the viewfinder. Use this mode when there is very strong backlight.
: Metering area
4
Exposure
When the overall background is dark, black areas of the image will come out gray if you use the cameras automatic exposure. Using this mode enables the camera to shift to under-exposure, allowing accurate black reproduction. Metering area is the same as spot metering.
Exposure compensation
In some situations, you may get better results if you manually compensate (adjust) the exposure value set automatically by the camera. In many cases, bright subjects (such as snow) will turn out darker than their natural colors. Adjusting toward + makes these subjects closer to their real shades. For the same reason, adjust toward when shooting dark subjects. The exposure can be adjusted in a range of 5.0 EV.
-2.0EV
Direct button
F+j
Viewfinder
48
EN
The exposure compensation indicator is displayed. The exposure compensation indicator will not be displayed when the exposure is compensated by 0.
When set to 1/3 EV increments
+2.0
2008. 08.16
1/2 EV
If the exposure compensation value exceeds the scale of the exposure compensation indicator, a red vw is displayed on the left and right edges of the indicator.
TIPS
j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. gEV STEP (P. 94)
j You can set the exposure compensation value without pressing F button. gDIAL FUNCTION (P. 89)
4
Exposure
Notes
AE lock
The metered exposure value can be locked with the AEL/AFL button (AE lock). Use AE lock when you want a different exposure setting from the one that would normally apply under the current shooting conditions. Normally, pressing the shutter button halfway locks both AF (auto focus) and AE (automatic exposure), but you can lock the exposure alone by pressing the AEL/AFL button. Press the AEL/AFL button at the position where you wish to lock the metering values and the exposure will be locked. The exposure is locked while the AEL/AFL button is pressed. Now press the shutter button. Releasing the AEL/AFL button cancels AE lock.
TIPS j You can lock the metering result so that it is not canceled when the AEL/AFL button is released. gAEL/AFL MEMO (P. 91) j You can switch the functions of the AEL/AFL button and the < button. gA (P. 92)
AEL/AFL button
If you find it difficult to press the AEL/AFL button and shutter button at the same time: To activate AE lock with a set metering mode:
AE lock
j You can set the metering mode for locking the exposure with the AE lock. gAELMetering (P. 95)
Viewfinder
49
EN
AE bracketing
The camera automatically shoots a number of pictures at different exposure values for each frame. Even in conditions where correct exposure is difficult to obtain (such as a backlit subject or a scene at dusk), you can pick the picture you prefer from a selected number of frames with a variety of different exposure settings (exposure and compensation values). The pictures are taken in the following order: Picture with optimum exposure, picture adjusted in direction, and picture adjusted in + direction.
e.g.) When BKT is set to [3F 1.0EV]
-1.0EV
+1.0EV
4
Exposure
Compensation value: 0.3, 0.7 or 1.0 The compensation value will change if the EV step is changed. gEV STEP (P. 94) Number of frames: 3 Menu MENU [X] [AE BKT]
AE BKT WB BKT FL BKT AE BKT OFF 3F 0.3EV 3F 0.7EV 3F 1.0EV GO
CANCEL
SELECT
Start shooting. In single-frame shooting, the exposure changes every time the shutter button is pressed. In sequential shooting, hold down the shutter button until the selected number of frames are taken. Releasing the shutter button stops auto bracketing shooting. When it stops, 0 is displayed in green on the super control panel.
Viewfinder
The exposure value for the next shot is displayed during shooting.
How AE bracketing compensates exposure in each shooting mode Depending on the selected shooting mode, exposure is compensated in the following way: P mode : Aperture value and shutter speed A mode : Shutter speed S mode : Aperture value M mode : Shutter speed
TIPS
j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to the exposure value you have compensated.
50
EN
MENU
: The sensitivity is set automatically according to the shooting conditions. With the [ISOAUTO SET] setting, you can set the maximum ISO that is set automatically. gISO-AUTO SET (P. 94) [100 - 1600]: Fixed ISO sensitivity. Setting display You can check the settings in the viewfinder while using the ISO button to make the settings.
: Auto : 100 - 1600
i button
4
Exposure
ISO
100 800 1600 200 400
SELECT
GO
Viewfinder
TIPS
j Normally, the AUTO setting is not available in M mode, but you can set it for use in all shooting modes. gISO-AUTO (P. 94)
51
EN
Setting display You can check the settings in the viewfinder while using the AF button to make the settings.
: S-AF : C-AF : MF : S-AF+MF : C-AF+MF
AF button
5
Focusing and shooting functions
Viewfinder
AF MODE
S-AF MF C-AF+MF C-AF S-AF+MF
SELECT
GO
TIPS
j The built-in flash can function as an AF illuminator. This makes focusing easier in low-light conditions using AF mode. gAF ILLUMINAT. (P. 89)
j By registering [MF] to the < button, you can press the < button to switch to MF mode. g; FUNCTION (P. 91)
52
EN
When you want to be able to shoot even if the subject is not in focus:
j See RLS PRIORITY S/RLS PRIORITY C (gP. 93).
MF (manual focus)
This function allows you to manually focus on any subject. Adjust the focus using the focus ring.
Near
5
Focusing and shooting functions
) Focus ring
TIPS
j You can select the rotational direction of the focus ring to suit your preference for how the lens adjusts to the focusing point. gFOCUS RING (P. 89)
j When you focus the lens on a subject manually (by turning the focus ring), the AF confirmation mark lights. When P is set with [AF AREA], AF confirmation lights up if the subject is in focus at the center AF target.
Notes
If the shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF is activated and your adjustments are canceled.
53
EN
TIPS
j You can set the AEL/AFL button to operate C-AF. gAEL/AFL (P. 90)
Notes
If the shutter button is pressed again after fine-adjusting the focus with the focus ring, the AF is activated and your adjustments are canceled.
AF target selection
This camera has 3 AF targets for focusing on the subject with auto focus. You can select only one of the AF targets. When [LIVE VIEW AF MODE] is set to [IMAGER AF], 11 AF targets will be available during live view. gTaking a picture using live view (P. 37) [AUTO] or P Focuses using the 3 AF targets. Q Focuses using the left AF target. R Focuses using the center AF target. S Focuses using the right AF target.
Viewfinder Center AF target
5
Focusing and shooting functions
Left AF target Right AF target
With the [IMAGER AF] setting, target selection is possible using the P button or the super control panel. Turn the control dial to select the AF target.
250 F5.6
P button
AF AREA
SELECT
GO
54
EN
When selecting an AF target, press the < button and the F button at the same time.
The home position is registered at the time the buttons are pressed. The home position cannot be registered when operated from a menu.
AF AREA
HP
SELECT
GO
Shooting To use this function, you must assign the [P HOME] function to the < button in advance. g; FUNCTION (P. 91)
5
Focusing and shooting functions
55
EN
Adjust the AF target with the subject to be focused and press the shutter button halfway until the AF confirmation mark lights up.
The focus is locked. The AF confirmation mark and the AF target in focus light up in the viewfinder. If the AF confirmation mark blinks, press the shutter button halfway again. While the shutter button is being pressed, the super control panel disappears.
Shutter button
Card access lamp e.g.) The camera focuses using the center AF target.
5
Focusing and shooting functions
AF target
AF confirmation mark
While pressing the shutter button halfway, move to the desired composition and press the button all the way.
The card access lamp blinks while the picture is being stored on the card.
If the subject has lower contrast than its surroundings If the contrast of the subject is weak, such as when the lighting is insufficient or the subject cannot be seen clearly because of fog, the focus may not be achieved. Focus (focus lock) on a high-contrast object the same distance away as the intended subject, recompose your shot and then take the picture.
56
EN
Sequential shooting
Single-frame shooting o Shoots 1 frame at a time when the shutter button is pressed (normal shooting mode). Sequential shooting j Shoots at 3.5 frames/sec. for as long as the shutter button is pressed (during JPEG). Press the shutter button fully and keep it pressed. The camera will take pictures in sequence until you release the button. Focus, exposure, and white balance are locked at the first frame (during S-AF, MF).
Notes
During sequential shooting, if the battery check blinks due to low battery, the camera stops shooting and starts saving the pictures you have taken on the card. The camera may not save all of the pictures depending on how much battery power remains.
p: [j/Y/<]
Setting display You can check the settings in the viewfinder while using the j/Y/< button to make the settings.
Single-frame shooting/ Sequential shooting Self-timer Remote control
5
Focusing and shooting functions
i button
: 0 second : 2 seconds
SELECT
GO
Anti-shock display (gP. 60): The D symbol displayed next to the icon on the super control panel indicates that anti-shock is activated.
57
EN
Self-timer shooting
This function lets you take pictures using the self-timer. You can set the camera to release the shutter after either 12 or 2 seconds. Fix the camera securely on a tripod for self-timer shooting. For the setting method, see Sequential shooting (gP. 57). Press the shutter button all the way. When Y12s is selected : First, the self-timer lamp lights up for approximately 10 seconds, then it blinks for approximately 2 seconds and the picture is taken. When Y2s is selected : The self-timer lamp blinks for approximately 2 seconds, and then the picture is taken. To cancel the activated self-timer, press the j/Y/< button.
Self-timer lamp
Notes
Do not press the shutter button while standing in front of the camera; this could result in the subject being out of focus since focusing is performed when the shutter button is pressed halfway.
5
Focusing and shooting functions
Eyepiece cover When shooting without looking through the viewfinder, attach the eyepiece cover to the viewfinder to prevent the light entering the viewfinder from changing the exposure. Attach the eyepiece cover after removing the eyecup as illustrated. The same applies when replacing with an optional eyecup.
Eyecup Eyepiece cover
58
EN
Mount the camera securely on a tripod, point the remote control at the remote control receiver on the camera and press the shutter button on the remote control. When <0s is selected : The focus and exposure are locked, the remote control lamp blinks and the picture is taken. When <2s is selected : The focus and exposure are locked, the remote control lamp blinks, and after approximately 2 seconds the picture is taken.
Transmitted signal effective area Point the remote control at the remote control receiver of the camera within the effective area as shown below. When powerful lighting such as direct sunlight is shining on the remote control receiver, or when fluorescent light or devices emitting electrical or radio waves are nearby, it could narrow the effective area.
Remote control receiver
Remote control
5
Focusing and shooting functions
TIPS
j The transmitted signal may not be effective if the remote control receiver is exposed to powerful lighting. Move the remote control closer to the camera and press the shutter button on the remote control again. j The transmitted signal may not be effective if the remote control is too far from the camera. Move the remote control closer to the camera and press the shutter button on the remote control again. j There is signal interference. Change the channel as described in the remote controls manual.
The remote control lamp does not blink after the shutter button on the remote control is pressed:
j The remote control shooting mode will not be canceled after shooting. Press the j/Y/< button to set to [o] (single-frame shooting), etc.
To use the shutter button on the camera in the remote control shooting mode:
j The shutter button on the camera still works even in the remote control shooting mode.
Notes
The shutter will not be released if the subject is not in focus. Under bright light conditions, the remote control lamp may be difficult to see, making it hard to determine whether or not the picture has been taken. Zoom is not available on the remote control.
59
EN
Bulb shooting with the remote control Set the mode dial to M, then set the shutter speed to [BULB]. gBulb shooting (P. 46)
Press the W button on the remote control to open the shutter. When the time set in BULB TIMER (gP. 95) elapses, the shutter closes automatically.
Anti-shock
You can select the interval from the time the mirror is raised until the shutter is released. This diminishes camera shake caused by vibrations when the mirror moves. This feature can be useful in astrophotography and microscope photography or other photographic situations where a very slow shutter speed is used, and camera vibration needs to be kept to a minimum.
5
Focusing and shooting functions
1 2 3
MENU [X] [ANTI-SHOCKz] Select the time delay after the mirror is raised and until the shutter is released from 1 to 30 seconds and press the i button. Anti-shock is added to the shooting functions individually (single-frame shooting, sequential shooting, self-timer shooting, and remote control shooting). For the setting method, see Sequential shooting (gP. 57).
Image stabilizer
You can reduce the amount of camera shake that easily occurs when shooting in low light situations or shooting with high magnification. OFF I.S. 1 I.S. 2 I.S. 3 Image stabilizer is off. Image stabilizer is on. This is used for panning with the camera in the horizontal direction to achieve a blurred background. The horizontal image stabilizer is turned off, and only the vertical image stabilizer is activated. This is used for panning with the camera in the vertical direction to achieve a blurred background (tilting). The vertical image stabilizer is turned off, and only the horizontal image stabilizer is activated. o j
j
Direct button
Viewfinder
Displayed when [IMAGE STABILIZER] is set to [I.S. 1], [I.S. 2] or [I.S. 3].
o button
60
EN
Setting the focal length By setting in advance the focal length of the lens, you can use the image stabilizer function also with lenses other than Four Thirds system lenses. This setting is deactivated when a Four Thirds system lens is attached.
IMAGE STABILIZER
OFF I.S. 1 I.S. 2 I.S. 3
1 2
Press the F button in the [IMAGE STABILIZER] screen. Use the control dial or ac to set the focal length and press i.
FOCAL LENGTH
50 mm
GO
If the focal length of the lens you are using is not listed, select the closest value.
5
Focusing and shooting functions
38
LN
Notes
The image stabilizer cannot correct excessive camera shake or camera shake that occurs when the shutter speed is set to the slowest speed. In these cases, it is recommended that you use a tripod. When using a tripod, set [IMAGE STABILIZER] to [OFF]. When using a lens with an image stabilization function, turn off the image stabilization function of either the lens or the camera. If [IMAGE STABILIZER] is set to [I.S.1], [I.S.2] or [I.S.3] and you turn off the camera, the camera will vibrate. This is due to the camera initializing the image stabilizer mechanism. Without this initialization, the image stabilizer may not be able to achieve the proper effect. If the image stabilizer icon is displayed in red on the monitor, it indicates a failure of the image stabilizer function. If you take a picture as is, the composition may be off. Consult your Olympus Authorized Service Center.
61
EN
Recording formats
JPEG For JPEG images, select a combination of image size (Y, X, W) and compression rate (SF, F, N, B). An image consists of pixels (dots). When you enlarge an image with a low pixel count, it will be displayed as a mosaic. If an image has a high pixel count, the file size (amount of data) will be larger and the number of storable still pictures will be lower. The higher the compression, the smaller the file size. However, the image will have less clarity when played back.
Image with a high pixel count
6
Record mode, white balance, and picture mode
Application Number of pixels Y (Large) Select for the print size X (Middle) Pixel count 3648 2736 3200 2400 2560 1920 1600 1200 1280 960 1024 768
B (Basic) 1/12 YB XB
WSF
WF
WN
WB
RAW This is unprocessed data that has not undergone changes in white balance, sharpness, contrast or color. To display as an image on the computer, use OLYMPUS Master. RAW data cannot be displayed on a different camera or by using common software, and it cannot be selected for print reservation. It is possible to edit images taken with the record mode set to RAW data using this camera. gEditing still images (P. 84)
62
EN
MENU
arge Normal
6
Record mode, white balance, and picture mode
To find out the file size/number of storable still pictures for each record mode:
j Record mode and file size/number of storable still pictures (gP. 128)
CARD SETUP RAW CUSTOM RESET PICTURE MODE F N GRADATION N WB N CANCEL SELECT GO
63
EN
6
Record mode, white balance, and picture mode
WB mode AUTO 5 5300K 2 7500K 3 6000K 1 3000K w 4000K x 4500K y 6600K n 5500K V CWB
Light conditions Used for most light conditions (when there is a white portion framed in the viewfinder). Use this mode for general use. For shooting outdoors on a clear day, or to capture the reds in a sunset or the colors in a fireworks display For shooting outdoors in the shadows on a clear day For shooting outdoors on a cloudy day For shooting under a tungsten light For shooting under white fluorescent lighting For shooting under a neutral white fluorescent lamp For shooting under a daylight fluorescent lamp For flash shooting Color temperature set by one-touch WB. gSetting the one-touch white balance (P. 66) Color temperature set in custom white balance menu. This can be set from 2000K to 14000K. When the value has not been set, it is set to 5400K.
64
EN
Custom white balance is set by selecting [CWB] and turning the control dial while pressing down the F button. Menu MENU [W] [WB]
Setting display You can check the settings in the viewfinder while using the WB button to make the settings.
: Auto white balance : w/x/y : Custom white balance : One-touch white balance
WB button
WB
Viewfinder
CWB 5400
6
Record mode, white balance, and picture mode
SELECT GO
TIPS
j In the auto WB setting, if there is no near-white color in the image framed in the screen, the white balance will not be correctly determined. In such a case, try preset WB or one-touch WB settings.
WB compensation
This function lets you make fine changes to the auto WB and preset WB settings. Super control panel Menu i p: [>] [W] [WB]
MENU
Select the white balance to adjust and press d. Adjusting the white balance in the A direction (AmberBlue) Depending on the original WB conditions, the image will become more amber when adjusted toward +, and bluer when adjusted toward .
AUTO >
A G
+2 5
Adjusting the white balance in the G direction (GreenAEL WB PREVIEW Magenta) AFL Depending on the original WB conditions, the image will CANCEL SELECT GO become greener when adjusted toward +, and magenta when adjusted toward . The white balance can be adjusted in 7 increments in each direction.
65
EN
TIPS
j After setting the compensation value, point the camera at the subject to take test shots. When the AEL/AFL button is pressed, sample images that have been taken with the current WB settings are displayed.
This function is useful when you need a more precise white balance than preset WB can provide. Point the camera at a sheet of white paper under the light source you want to use to determine the white balance. The optimum white balance for the current shooting conditions can be saved in the camera. This is useful when shooting a subject under natural light, as well as under various light sources with different color temperatures. Set [; FUNCTION] to [V] beforehand. (gP. 91)
1 2 3
While holding down the < button, press the shutter button.
The one-touch white balance screen appears.
< button
6
Record mode, white balance, and picture mode
j When there is not enough white in the image, or when the image is too bright, too dark or the colors look unnatural, you cannot register the white balance. Change the aperture and shutter speed settings, then repeat the procedure from Step 1.
66
EN
WB bracketing
Three images with different white balances (adjusted in specified color directions) are automatically created from one shot. One image has the specified white balance, while the others are the same image adjusted in different color directions. Menu MENU [X] [WB BKT]
WB BKT A-B 3F 4STEP G-M 3F 4STEP
Use bd to select the color direction, and ac to set the EV step. Select from [OFF], [3F 2STEP], [3F 4STEP], or [3F 6STEP] for the EV step for both the A-B (amber-blue) direction and the G-M (green-magenta) direction. When the shutter button is pressed down all the way, 3 images adjusted in specified color directions are automatically created.
TIPS
CANCEL
SELECT
GO
j Adjust white balance manually, then use the WB bracketing feature. WB bracketing is applied to the white balance you have adjusted.
Notes
During WB bracketing, the camera cannot shoot the pictures if there is not enough memory in the camera and card for storing at least the selected number of frames.
Picture mode
You can select image tone to create unique image effects. You can also fine-adjust image parameters such as contrast and sharpness for each mode. The adjusted parameters are recorded in each picture effect mode. [hVIVID] : Produces vivid colors. [iNATURAL] : Produces natural colors. [jMUTED] : Produces flat tones. [ZPORTRAIT] : Produces beautiful skin tones. [MONOTONE] : Produces black and white tone. [CUSTOM] : Select one picture mode, set the parameters, and register the setting. You can also register the gradation to [CUSTOM]. This setting is set separately from [GRADATION] in the menu. gGradation (P. 68) Super control panel Menu i p: [PICTURE MODE]
PICTURE MODE CARD SETUP h CUSTOM RESET VIVID iNATURAL PICTURE MODE GRADATION jMUTED ZPORTRAIT WB CANCEL MONOTONE SELECT GO
6
Record mode, white balance, and picture mode
67
EN
The adjustable parameters are classified according to the picture modes. The individual parameters are as follows. [CONTRAST] : Distinction between light and dark [SHARPNESS] : Sharpness of the image [SATURATION] : Vividness of the color [B&W FILTER] : Creates a black and white image. The filter color is brightened and the complementary color is darkened.
[N: NEUTRAL] [Ye: YELLOW] [Or: ORANGE] [R: RED] [G: GREEN] : Creates a normal black and white image. : Reproduces clearly defined white cloud with natural blue sky. : Slightly emphasizes colors in blue skies and sunsets. : Strongly emphasizes colors in blue skies and brightness of crimson foliage. : Strongly emphasizes colors in red lips and green leaves. : : : : :
CANCEL
SELECT
GO
Hi 0 Lo
+2
Hi
+1 Hi 0 Hi -1 -2
CANCEL
SELECT
GO
[PICT. TONE]
[N: NEUTRAL] [S: SEPIA] [B: BLUE] [P: PURPLE] [G: GREEN]
6
Record mode, white balance, and picture mode
Gradation
In addition to the [NORMAL] gradation setting, you can select from 3 other gradation settings. [HIGH KEY] : Gradation for a bright subject. [LOW KEY] : Gradation for a dark subject. [AUTO] : Divides the image into detailed regions and adjusts the brightness separately for each region. This is effective for images with areas of large contrast in which the whites appear too bright or the blacks appear too dark. [NORMAL] : Use [NORMAL] mode for general uses.
x 68
EN
Notes
Contrast adjustment does not work when set to [HIGH KEY], [LOW KEY], or [AUTO].
Noise reduction
This function reduces the noise that is generated during long exposures. When shooting night scenes, shutter speeds are slower and noise tends to appear in images. With [NOISE REDUCT.], you can let the camera reduce noise automatically to produce clearer images. When set to [AUTO], noise reduction will be activated only when the shutter speed is slow. When set to [ON], noise reduction will always be activated. While noise reduction is activated, it takes about twice the usual time to take a picture.
OFF
ON/AUTO
Menu
MENU
The noise-reduction process is activated after shooting. The card access lamp blinks during the noise-reduction process. You cannot take more pictures until the card access lamp turns off. [busy] is displayed on the viewfinder while noise reduction is operating.
Notes
During sequential shooting, [NOISE REDUCT.] is [OFF] automatically. This function may not work effectively with some shooting conditions or subjects.
6
Record mode, white balance, and picture mode
Noise filter
You can select the noise processing level. Use [STANDARD] for general use. [HIGH] is recommended during high sensitivity shooting. Menu MENU [W] [NOISE FILTER]
69
EN
Flash shooting
Flash mode setting
The camera sets the flash mode according to various factors such as firing pattern and flash timing. Available flash modes depend on the exposure mode. The flash modes are available to optional external flashes. Auto flash AUTO The flash fires automatically in low light or backlight conditions. To shoot a subject with backlighting, position the AF target over the subject. Flash synchronization speed/Slow limit Shutter speed can be changed when the built-in flash fires. g#X-SYNC. (P. 95), #SLOW LIMIT (P. 95) Red-eye reduction flash !/H In the red-eye reduction flash mode, a series of pre-flashes are emitted just before the regular flash fires. This helps accustom the subjects eyes to the bright light and minimizes the redeye phenomenon. In S/M mode, the flash always fires.
The subjects eyes appear red
Notes
After the pre-flashes, it takes about 1 second before the shutter is released. Hold the camera firmly to avoid camera shake. Effectiveness may be limited if the subject is not looking directly at pre-flashes, or if the shooting range is too far. Individual physical characteristics may also limit effectiveness.
7
Flash shooting
Slow synchronization (1st curtain) #SLOW The slow synchronization flash is designed for slow shutter speeds. Normally, when shooting with a flash, shutter speeds cannot go below a certain level to prevent camera shake. But when shooting a subject against a night scene, fast shutter speeds can make the background too dark. Slow synchronization allows you to capture both the background and the subject. Since the shutter speed is slow, be sure to stabilize the camera by using a tripod so as not to cause the picture to be blurred.
1st curtain Usually, the flash fires right after the shutter fully opens. This is called 1st curtain. This method is usually used during flash shooting.
70
EN
Slow synchronization (2nd curtain) #SLOW2/2nd CURTAIN 2nd curtain flash fires just before the shutter closes. Changing the flash timing can create interesting effects in your picture, such as expressing the movement of a car by showing the tail-lights streaming backwards. The slower the shutter speed, the better the effects turn out. In S/M mode, the flash always fires. When the shutter speed is set to 2 sec.
2nd curtain
Slow synchronization (1st curtain)/Red-eye reduction flash !SLOW While using slow synchronization with flash shooting, you can also use this function to achieve red-eye reduction. When shooting a subject against a night scene, this function allows you to reduce the red-eye phenomenon. As the time from emitting pre-flashes to shooting is long in 2nd curtain synchronization, it is difficult to achieve red-eye reduction. Hence, only 1st curtain synchronization setting is available. Fill-in flash # The flash fires regardless of the light conditions. This mode is useful for eliminating shadows on the subjects face (such as shadows from tree leaves), in a backlight situation, or for correcting the color shift produced by artificial lighting (especially fluorescent light).
7
Flash shooting
Notes
When the flash fires, the shutter speed is set to 1/180 sec. or less. When shooting a subject against a bright background with the fill-in flash, the background may be overexposed. In this case, use the optional FL-50R external flash or a similar flash and shoot in the Super FP flash mode. gSuper FP flash (P. 76)
Flash off $ The flash does not fire. Even in this mode, the flash can be used as an AF illuminator when it is raised. gAF ILLUMINAT. (P. 89)
71
EN
Manual flash This allows the built-in flash to output a fixed amount of light. To shoot with manual flash, set the f-number on the lens based on the distance to the subject.
Ratio of amount of light FULL (1/1) 1/4 1/16 1/64 GN: Guide number (Equivalent to ISO 100) 12 6 3 1.5
ISO sensitivity
ISO value ISO sensitivity 100 1.0 200 1.4 400 2.0 800 2.8 1600 4.0
7
Flash shooting
FLASH MODE
AUTO SLOW 1/4 SLOW 1 / 16 SLOW2 1 / 64 FULL
SELECT
GO
Not all flash modes may be available depending on the shooting mode. For details refer to Flash modes that can be set by shooting mode (gP. 126).
72
EN
# button
2 3
Viewfinder
7
Flash shooting
TIPS j Set [AUTO POP UP] to [OFF]. gAUTO POP UP (P. 95). j See RLS PRIORITY S/RLS PRIORITY C (gP. 93)
Notes
When [#RC MODE] is set to [ON], the built-in flash will fire only to communicate with the external flash so it will not function as a flash. gShooting with the Olympus wireless RC flash system (P. 76)
73
EN
+3
7
Flash shooting
OFF -3
Notes
CANCEL SELECT GO This does not work during manual flash. This does not work when the flash control mode on the electronic flash is set to MANUAL. If flash intensity is adjusted on the electronic flash, it will be combined with the cameras flash intensity setting. When [w+F] is set to [ON], the flash intensity value will be added to the exposure compensation value. gw+F (P. 95)
Flash bracketing
The camera shoots multiple frames, changing the amount of light emitted by the flash for each shot. The camera shoots 3 frames at a time with the following amount of light: optimum light, light adjusted in the direction, and light adjusted in the + direction. Menu MENU [X] [FL BKT]
FL BKT OFF 3F 0.3EV 3F 0.7EV 3F 1.0EV GO
74
EN
The compensation value will change according to the EV step. gEV STEP (P. 94) In single-frame shooting, the amount of light emitted by the flash changes every time the shutter button is pressed. In sequential shooting, hold down the shutter button until the selected number of frames are taken. Releasing the shutter button stops flash bracketing shooting. When it stops, 0 is displayed in green on the super control panel.
CANCEL
SELECT
* The focal length of the lens that can be used (Calculated based on 35 mm film camera)
Notes
The FL-40 optional flash cannot be used.
Using the external electronic flash Be sure to attach the flash to the camera before turning on the flashs power.
Remove the hot shoe cover by sliding it in the direction indicated by the arrow in the illustration.
Keep the shoe cover in a safe place to avoid losing it, and put it back on the camera after flash shooting.
7
Flash shooting
3 4 5 6 7
Lock pin
Lock ring
75
EN
Notes
The built-in flash cannot be used when an external flash is attached to the hot shoe.
Super FP flash Super FP flash is available with the FL-50R or FL-36R. Use the Super FP flash where normal flashes cannot be used with high shutter speed. Fill-in flash shooting with the aperture open (such as in outdoor portrait shooting) is also possible with Super FP flash. For details, refer to the external flashs manual.
Super FP flash
2008. 08.16
FP
OFF
arge Normal
7
Remote sensor
76
EN
Flash shooting
30 30
50 50 100 100
60 60
30 30
10m
50 50
5m
1 2
Position the flash while referring to the Wireless flash setup range, and turn on the flash. Press the MODE button on the flash to set it to RC mode, and set the channel and group of the flash.
3 4
Use the super control panel to set the flash mode and other settings for each group.
Flash intensity value
Group Select the flash control mode and adjust the flash intensity individually for groups A, B, and C. For MANUAL, select the flash intensity.
2008. 08.16
TTL M OFF +1.0 1/8
RC
Normal flash/Super FP flash Switch between normal flash and Super FP flash.
LO 2
Communication light level Set the communication light level to [HI], [MID], or [LO]. Channel Set the communication channel to the same channel used on the flash.
5 6 7 8
x
Press the # button to raise the built-in flash. After shooting preparations are completed, take some test shots to check the flash operation and images. Begin shooting while checking the charging completed indications of the camera and flash. Notes
Although there is no limit to the number of wireless flashes you can use, it is recommended that each group have no more than three flashes to prevent flash malfunction due to mutual interference. In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be used for flash shooting in this mode. For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within 4 seconds. Wireless flash shooting may not operate properly when using a slower shutter speed or anti-shock setting.
7
Flash shooting
77
EN
1 2 3 4
x
Remove the hot shoe cover to connect the flash unit to the camera. Set the shooting mode to M, then set the aperture value and shutter speed.
Set the shutter speed to 1/180 sec. or slower. If the shutter speed is faster than this, commercially available flashes cannot be used. A slower shutter speed may produce blurred images.
Set the ISO sensitivity and aperture value on the camera to match the flash control mode on the flash.
Refer to the flashs manual for instructions on how to set its flash control mode.
Notes
The flash fires each time the shutter is released. When you do not need to use the flash, turn off the flashs power. Check beforehand that the flash you are using is synchronized with the camera.
Non-specified commercial flashes 1) Exposures when using a flash require that adjustments be made on the flash. If a flash is used in the auto mode, match it with the f-number and ISO sensitivity settings on the camera. 2) Even if the flash auto f-number and ISO sensitivity are set the same as on the camera, the correct exposure may not be obtained depending on the shooting conditions. In such a case, adjust the auto f-number or ISO on the flash or calculate the distance in the manual mode. 3) Use a flash with an illumination angle that matches the focal length of the lens. The focal length of the lens for 35 mm film is approximately twice as long as the focal length of the lenses designed for this camera. 4) Do not use a flash unit or other accessory TTL flash that has additional communication functions other than the specified flashes, since it may not only fail to function normally, but may also cause damage to the cameras circuitry.
7
Flash shooting
78
EN
Playback functions
Single-frame/Close-up playback
The basic procedure for viewing pictures are as shown below. However, before using any of these functions, follow Step 1 below. You can set the camera to automatically switch to single-frame playback mode after shooting. gREC VIEW (P. 99)
Use p to select images you want to view. You can also turn the dial to switch to U for close-up playback.
G INFO button
U (Close-up playback)
(Single-frame playback)
LN
a : Displays the frame that is stored 10 frames back c : Displays the frame that is stored 10 frames ahead d : Displays the next frame b : Displays the previous frame
Press the INFO button (Close-up position playback) Press p to move the display of the close-up position. When [g FACE DETECT] (gP. 39) is set to [ON], a frame is displayed around a detected face. Press i to move the frame to another face.
8
Playback functions
Press the < button Plays back the image at a 10 magnified close-up position. Press the INFO button To exit the playback mode, press the q button again. Pressing the shutter button halfway resumes the shooting mode.
(Close-up frame-by-frame playback) Press bd to view frameby-frame close-ups. When [g FACE DETECT] is set to [ON], press ac to move to another face in close-up position. Press the INFO button to return to close-up playback.
15
79
EN
2 3
Benchmark image
8
Playback functions
Operations during light box display Pressing the i button replaces the image on the left with the image on the right and becomes the new benchmark image. You can use the control dial to change the magnification of both images at the same time. Pressing the < button or INFO button allows you to move the position of the image on the right with the p button. Pressing the < button or INFO button again allows you to move the positions of both images with the p button.
p : Selects the right image
*
* You can also use the INFO button in the same way for this procedure.
80
EN
LN
(Single-frame playback)
2008
8
Playback functions
(Calendar display) (100-frame index display) (49-frame index display) (25-frame index display)
Calendar display With the calendar, you can display images recorded on the card by date. If more than one image was taken on a single date, the image shot first on that date is displayed. Use p to select a date and press the i button to play back images for the selected date in single-frame display.
81
EN
Information display
This allows you to display detailed information about the image. Luminance information can also be displayed with histogram and highlight graphs. Press the INFO button repeatedly until the desired information is displayed. This setting is stored and will be shown the next time the information display is called up.
INFO button
Image only
LN
Information 1
x10
LN
Information 2
x10 [3648x2736,1/8]
100-0015
15
15
Displays the frame number, print reservation, protect, record mode and file number
Displays the frame number, print reservation, protect, record mode, number of pixels, compression rate, date and time and file number Shooting information
Shadow/Highlight display
*Histogram
8
Playback functions
If the bars in the histogram are higher on the right, the image may be too bright. If the bars are higher on the left, the image may be too dark. Compensate the exposure or shoot again. Histogram*
x10
LN LN
1/250 F5.6 +2.0 45mm ISO 100 0.0 WB : AUTO A : 0 G: 0 NATURAL sRGB
LN
Overall information
x10
SHADOW HILIGHT
Shadow/Highlight display Under- or overexposed parts of the recorded image are displayed. Shadows (underexposed) parts will be shown in blue. Highlights (overexposed) parts will be shown in red.
Histogram display Distribution of the brightness of the recorded image is displayed in a histogram (brightness component graph).
82
EN
Slideshow
This function displays images stored on the card one after another. Images are displayed one by one for about 5 seconds starting from the currently displayed image. Slideshow can be performed using index display. You can select the number of frames displayed during slideshow from 1, 4, 9, 16, 25, 49 or 100.
1 2 3 4
x
Press the i button to start the slideshow. Press the i button to stop the slideshow.
When selecting [L]
Notes
If the slideshow is left running for about 30 minutes, the camera will turn off automatically.
Rotating images
This function lets you rotate images and display them vertically on the monitor during singleframe playback. This is useful when taking pictures with the camera held vertically. The images will automatically be displayed in the correct direction even if the camera is rotated.
MENU [q]
[y]
F button
When set to [ON], images shot vertically will be automatically rotated and displayed during playback. You can also press the F button to rotate and display the image. The rotated image will be recorded on the card in that position.
8
Playback functions
LN
LN
LN
83
EN
Playback on TV
Use the video cable provided with the camera to play back recorded images on your TV.
1 2 3
Turn the camera and TV off, and connect the video cable as illustrated. Turn on the TV and set it to the video input mode. For details on switching to the video input mode, refer to the TVs manual. Turn the camera on and press the q (playback) button.
q button Video cable
Multi-connector
Notes
To connect the camera to a TV, use the provided video cable. Make sure that the cameras video output signal type is the same as the TVs video signal type. gVIDEO OUT (P. 99) The cameras monitor turns off automatically when the video cable is connected to the camera. The image may appear off-center depending on the TV screen.
8
Playback functions
84
EN
Editing images recorded in JPEG data format [SHADOW ADJ] Brightens a dark backlit subject. [REDEYE FIX] Reduces the red-eye phenomenon during flash shooting. [P] Set the trimming size with the control dial and the trimming position with the arrow pad.
GO
[BLACK & WHITE] Creates black and white images. [SEPIA] Creates sepia-toned images. [SATURATION] Sets the color depth. Adjust the color saturation checking the picture on the screen. [Q] Converts the image file size to 1280 960, 640 480 or 320 240.
1 2 3
MENU [q] [EDIT] Use bd to select an image, then press the i button.
The camera recognizes the image data format. For images recorded in RAW+JPEG, a selection screen will appear, asking you which data to edit.
The setting screen varies with the image data format. Select the item you want to edit and do the following steps.
CANCEL
SELECT
GO
JPEG EDIT SHADOW ADJ REDEYE FIX BLACK & WHITE SEPIA CANCEL SELECT GO CANCEL
YES NO
8
Playback functions
GO
SELECT
The edited image is saved as another image, apart from the original image. To exit the edit mode, press the MENU button.
Notes
Red-eye correction may not work depending on the image. Red-eye correction may affect other parts of the image, as well as the eyes. Editing of a JPEG image is not possible in the following cases: When an image is recorded in RAW, when an image is processed on a PC, when there is not enough space in the card memory, when an image is recorded on another camera When resizing ([Q]) an image, you cannot select a larger number of pixels than was originally recorded.
85
EN
Copying images
This function lets you copy images to and from the xD-Picture Card and CompactFlash or Microdrive. This menu can be selected if both cards are inserted. The selected card is the copying source. gCF/xD (P. 98) Single-frame copy
1 2
Play back the image you want to copy and press the COPY/< button. Use ac to select [YES], then press the i button.
COPY/< button
Copying selected frames This function lets you select multiple images and copy them all at the same time during single-frame playback or index display.
1 2 3 4 1 2 3
Display the images you want to copy and press the i button.
The selected images will be shown with red frames. To cancel your selection, press the i button again.
COPY SELECT
8
Playback functions
Press p to display the next images you want to copy and press the i button. After you have selected the images to copy, press the COPY/< button. Use ac to select [YES], then press the i button.
YES NO
CANCEL
SELECT
GO
Copying all the frames MENU [q] [COPY ALL] Press d. Use ac to select [YES], then press the i button.
COPY ALL
YES NO
CANCEL
SELECT
GO
86
EN
Protecting images
Protect images you do not want to erase. Protected images cannot be erased by the singleframe or all-frame erase function. Single-frame protect Play back the image you want to protect and press the 0 button. 9 (protect mark) is displayed on the top right corner of the screen. To cancel the protection Display the images that are protected and press the 0 button.
i button 0 button
Protecting selected frames This function lets you select multiple images and protect them all at the same time during single-frame playback or index display.
1 2 3
Display the images you want to protect and press the i button.
The selected images will be shown with red frames. To cancel your selection, press the i button again. During index display, press p to select the images you want to protect and press the i button.
Press p to display the next images you want to protect and press the i button. After you have selected the images to protect, press the 0 button.
Canceling all protections This function lets you cancel the protection of several images at one time.
1 2
x
8
Playback functions
MENU [q] [RESET PROTECT] Use ac to select [YES], then press the i button. Notes
Formatting the card erases all images even if they have been protected. gFormatting the card (P. 121) Protected images cannot be rotated even when the F button is pressed.
87
EN
Erasing images
Lets you erase recorded images. You can select single-frame erase, which erases only the currently displayed image; all-frame erase, which erases all the images stored on the card; or selected frame erase, which erases only the frames selected.
Notes
When you perform all-frame or selected frame erase on images recorded using RAW+JPEG, both the RAW and JPEG images are erased. When using single-frame erase, you can select whether to erase the JPEG, RAW, or both RAW and JPEG images. gRAW+JPEG ERASE (P. 97) Protected images cannot be erased. Cancel protected images, then erase them. Once erased, images cannot be restored. gProtecting images (P. 87)
Single-frame erase
1 2
Play back the image you want to erase and press the S button. Use ac to select [YES], then press the i button.
S button
Erasing selected frames This function lets you erase selected images at one time during single-frame playback or index display.
Display the images you want to erase and press the i button.
The selected images will be shown with red frames. To cancel your selection, press the i button again. During index display, press p to select the images you want to erase and press the i button.
8
Playback functions
2 3 4 1 2 3
Press p to display the next images you want to erase and press the i button. After you have selected the images to erase, press the S button. Use ac to select [YES], then press the i button.
All-frame erase MENU [W] [CARD SETUP] Use ac to select [ALL ERASE], then press the i button. Use ac to select [YES], then press the i button.
All frames will be erased. TIPS
To erase immediately:
j If you have set QUICK ERASE (gP. 96) to [ON], pressing the S button will erase an image immediately. j You can set the initial position of the cursor to [YES]. gPRIORITY SET (P. 97)
88
EN
OFF
FUNCTION SELECT GO
FUNCTION SELECT GO
CANCEL
CANCEL
For details on using the menu lists, see Using the menu (gP. 29).
Custom Menu 1
AF ILLUMINAT.
a AF/MF
The built-in flash can be set to function as an AF illuminator. This makes focusing easier in low-light conditions using AF mode. To use this function, raise the flash. FOCUS RING You can customize how the lens adjusts to the focal point by selecting the rotational direction of the focus ring.
Near )
Near
RESET LENS When set to [ON], this resets the focus of the lens (infinity) each time the power is turned off. BULB FOCUSING You can set the camera to enable focus adjustments during bulb shooting with MF. [ON] During exposure, you can turn the focus ring and adjust the focus. [OFF] The focus is locked during exposure. LIVE VIEW AF MODE gP. 37
9
Customizing your camera
Custom Menu 1
DIAL FUNCTION
b BUTTON/DIAL
You can also switch the operation of the control dial to the opposite of factory default settings. For example, after setting [P] to [F], in P mode you can adjust the exposure compensation using the control dial and set the program shift using the control dial while holding down the F button.
89
EN
Mode P A S M
F FNo. F SHUTTER F SHUTTER FNo.
Setting
% (program shift)
j
Program shift Exposure compensation Aperture value Exposure compensation Shutter speed Exposure compensation Shutter speed Aperture value
F button + j
Exposure compensation Program shift Exposure compensation Aperture value Exposure compensation Shutter speed Aperture value Shutter speed
DIAL DIRECTION You can select the rotational direction of the control dial and the direction in which the shutter speed/aperture value will increase or decrease.
Setting DIAL1 DIAL2 q (rotational direction of the dial)
Slower shutter speed Open the aperture (f-number is decreased) Faster shutter speed Close the aperture (f-number is increased)
AEL/AFL You can use the AEL/AFL button to perform AF or metering operations instead of using the shutter button. Select the function of the button to match the operation when the shutter button is pressed. Select [mode1] to [mode4] in each focus mode. (You can only select [mode4] in C-AF mode.)
Shutter button function Mode [S-AF] mode1
S-AF S-AF k C-AF start C-AF start k k k k k Locked k Locked Locked k Locked k Locked k Locked k k k Locked Locked Locked Locked k k k k Locked k k Locked k Locked k Locked k k k S-AF k k C-AF start C-AF start k k S-AF Locked Locked k Locked Locked k k Locked Locked k Half-press Focus Exposure Full press Focus Exposure
9
Customizing your camera
mode2 mode3 [C-AF] mode1 mode2 mode3 mode4 [MF] mode1 mode2 mode3
90
EN
Basic operations [mode1] For determining the metered exposure while focusing. AE lock is activated while pressing the AEL/AFL button, allowing you to adjust the focus and determine the exposure separately. [mode2] For determining the exposure when you press the shutter button fully. This is useful for shooting scenes with significant changes in lighting, such as on a stage. [mode3] For focusing with the AEL/AFL button instead of the shutter button. [mode4] Press the AEL/AFL button to focus, and press the shutter button fully to determine the exposure. AEL/AFL MEMO You can lock and maintain the exposure by pressing the AEL/AFL button. [ON] Press the AEL/AFL button to lock and maintain the exposure. Press again to cancel the maintaining of the exposure. [OFF] The exposure will be locked only while the AEL/AFL button is pressed. ; FUNCTION You can assign a function to the < button. [Fn FACE DETECT] Press the < button to set [g FACE DETECT] to [ON] and activate the optimal settings. Press again to set it to [OFF]. gUsing the face detection function (P. 39), g FACE DETECT (P. 94) [PREVIEW]/[LIVE PREVIEW] (electronic) While holding down the < button, you can use the preview function. gPreview function (P. 47) [V] Press the < button to acquire the WB value. gSetting the one-touch white balance (P. 66) [P HOME] Press the < button to switch to the registered AF home position. Press again to return to the original position. If you turn off the camera while it is set to the AF home position, the original position will not be stored. gRegistering the AF target position (P. 55) [MF] Press the < button to switch AF mode to [MF]. Press the button again to switch to the original AF mode. If you turn off the camera while it is set to [MF], the original AF mode will not be stored. [RAWK] Press the < button to switch from JPEG to RAW+JPEG or from RAW+JPEG to JPEG for the record mode. You can change the record mode by turning the control dial while holding down the < button. [TEST PICTURE] Pressing the shutter button while pressing the < button enables you to check the picture you have just taken on the monitor without having to record the picture to the card. This is useful when you want to see how a picture turned out without saving it. [MY MODE] While holding down the < button, you can take pictures using the camera settings registered in the [MY MODE SETUP]. gMY MODE SETUP (P. 92) [OFF] Does not allow function allocation.
9
Customizing your camera
91
EN
j FUNCTION Other functions can be assigned to the j/Y/< button. [j/</Y] gSequential shooting (P. 57), Self-timer shooting (P. 58), Remote control shooting (P. 58) [AF AREA] gAF target selection (P. 54) [AF MODE] gAF mode selection (P. 52) [WB] gSelecting the white balance (P. 64) [METERING] gChanging the metering mode (P. 47) [ISO] gISO sensitivity setting (P. 51) MY MODE SETUP You can store two frequently used settings as My Mode. You can select which My Mode setting to use in advance by following the steps under Executing below. To use My Mode, set [; FUNCTION] to [MY MODE] and hold down the < button while shooting. g; FUNCTION (P. 91) Registering 1) Select [MY MODE1] or [MY MODE2] and press d. 2) Select [SET] and press the i button. The current settings are registered in the camera. For details on the functions that can be registered to My Mode, refer to Functions that can be registered with My Mode and Custom Reset Setting (gP. 129). To cancel the registration, select [RESET]. Executing 1) Select [MY MODE1] or [MY MODE2] and press the i button. 2) Select [YES] and press the i button. The selected My Mode is set. When shooting, press the shutter button while holding down the < button. BUTTON TIMER The direct button may remain selected even after it is released. [3SEC]/[5SEC]/[8SEC] The button remains selected during the number of seconds indicated. [HOLD] The button remains selected until you press it again. Buttons that can be set with [BUTTON TIMER] j/Y/<, F, #, WB, AF, ISO, G A You can switch the functions of the AEL/AFL button and the < button. When you select [ON], the AEL/AFL button will function as the < button, and the < button will function as the AEL/AFL button. n (arrow pad) LOCK
9
Customizing your camera
92
EN
To prevent any unwanted operations, you can lock the arrow pad so that the functions assigned to the arrow pad buttons are not activated when pressed. gList of direct buttons (P. 27)
Custom Menu 1
c RELEASE/j
RLS PRIORITY S/RLS PRIORITY C Normally, this camera does not release the shutter while the AF is operating or the flash is charging. If you want to release the shutter without waiting until these operations have completed, use the setting below. You can set the release priority individually in AF mode. RLS PRIORITY S Sets release priority for S-AF mode gP. 52. RLS PRIORITY C Sets release priority for C-AF mode gP. 53.
Custom Menu 1
8
d DISP/8/PC
You can turn off the beep sound that is emitted when the focus locks by pressing the shutter button. SLEEP After a specified period of time elapses with no operations being performed, the camera enters the sleep mode (stand-by) to save battery power. After the super control panel is displayed for a specified period of time, the backlight turns off. After a specific period of time has further passed, the camera enters sleep mode. [SLEEP] lets you select sleep timer from [1MIN], [3MIN], [5MIN], or [10MIN]. [OFF] cancels the sleep mode. The camera activates again as soon as you touch any button (the shutter button, q button, etc.). BACKLIT LCD (Backlight timer) To save battery power, after the super control panel is displayed for a specified period of time, the monitor backlight turns off and the monitor darkens. Select from [8SEC], [30SEC], or [1MIN] for the time until the backlight turns off. [HOLD] sets the backlight to stay on. The monitor backlight turns on again as soon as you touch any button (the shutter button, arrow pad, etc.). 4 h TIMER (Auto power off) You can set the camera to turn off automatically if not operated for 4 hours. It will not turn off if this is set to [OFF]. USB MODE You can connect the camera directly to a computer or printer with the provided USB cable. If you specify the device you are connecting to beforehand, you can skip the USB connection setting procedure normally required every time you connect the cable to the camera. For details on how to connect the camera to either device, refer to Connecting the camera to a printer (gP. 103) and Connecting the camera to a computer (gP. 107). [AUTO] The selection screen for the USB connection will be displayed every time you connect the cable to a computer or printer. [STORAGE] Allows you to transfer images to a computer. Also, select to use the OLYMPUS Master software via PC connection. [MTP] Allows you to transfer images to a computer running Windows Vista without using the OLYMPUS Master software.
9
Customizing your camera
93
EN
[CONTROL] Allows you to control the camera from a PC using the optional OLYMPUS Studio. [<EASY] Can be set when connecting the camera to a PictBridge-compatible printer. Pictures can be printed directly without using a PC. gConnecting the camera to a printer (P. 103) [<CUSTOM] Can be set when connecting the camera to a PictBridge-compatible printer. You can print out pictures with set number of prints, print paper and other settings. gConnecting the camera to a printer (P. 103) LIVE VIEW BOOST During live view shooting, you can brighten the monitor for easier confirmation on the subject. [OFF] The subject is displayed on the monitor with the brightness level that is adjusted according to the exposure being set. You can shoot while confirming through the monitor in advance to get a picture that is to your liking. [ON] The camera automatically adjusts the brightness level and displays the subject on the monitor for easier confirmation. The effect of the exposure compensation adjustments will not be reflected on the monitor. g FACE DETECT When set to [ON], the camera will detect peoples faces and automatically adjust the focus there. gUsing the face detection function (P. 39) You can play back close-up images focusing on the subjects face. gSingle-frame/Closeup playback (P. 79) FRAME ASSIST (Ruled lines display) During live view, you can display the ruled lines on the LCD monitor as a guide when confirming the composition. Press the INFO button repeatedly to display the ruled lines. gSwitching the information display (P. 40)
Custom Menu 1
e EXP/e/ISO
9
Customizing your camera
EV STEP You can select the EV step for exposure parameter setting, such as shutter speed, aperture value, or exposure compensation value, from [1/3EV], [1/2EV], or [1EV]. ISO-AUTO SET You can set the upper limit when ISO is set to [AUTO]. This sets the upper limit of the ISO value that automatically changes. The upper limit can be set from 100 to 1600. ISO-AUTO You can set the shooting mode in which the ISO [AUTO] setting is activated. [P/A/S] The [AUTO] setting is activated in all shooting modes except M mode. When [AUTO] is selected in M mode, ISO 100 is set. [ALL] The [AUTO] setting is activated for all shooting modes. The ISO is automatically selected to obtain the optimal ISO even in M mode.
94
EN
AELMetering You can set the metering mode when pressing the AEL/AFL button to lock the exposure. [AUTO] performs metering in the mode selected under [METERING]. BULB TIMER You can select the maximum time (in minutes) for bulb shooting.
Custom Menu 1
#X-SYNC.
f # CUSTOM
You can set the shutter speed that will be used when the flash fires. The speed can be set from 1/60 to 1/180 in 1/3 EV increments. For details on the synchronization speed of commercially available flashes, refer to their manuals. #SLOW LIMIT You can set the slow limit of the shutter speed that will be used when the flash fires. The speed can be set from 1/30 to 1/180 in 1/3 EV increments. w+F When set to [ON], it will be added to the exposure compensation value and flash intensity control will be performed. AUTO POP UP In AUTO or scene mode, the built-in flash pops up automatically in low light or backlight conditions. When set to [OFF], the built-in flash will not pop up automatically.
Custom Menu 1
ALL >
g K/COLOR/WB
You can apply the same compensation value to all the white balance modes at once. [ALL SET] The same compensation value applies to all WB modes. [ALL RESET] The WB compensation value settings applied to each WB mode are all cleared at once. If you select [ALL SET] 1) Use bd to select the color direction. Toward A: Amber-Blue/Toward G: Green-Magenta 2) Use ac to set the compensation value. gWB compensation (P. 65) Releasing the AEL/AFL button takes a sample image. You can check the white balance you have adjusted. If you select [ALL RESET] 1) Use ac to select [YES].
9
Customizing your camera
95
EN
COLOR SPACE You can select how colors are reproduced on the monitor or printer. The first character in image file names indicates the current color space. gFILE NAME (P. 97)
Standardized color space for Windows. Color space that can be set with Adobe Photoshop.
In some cases, the edges of the image may be shadowed due to the properties of the lens. The shading compensation function compensates by increasing brightness at the dark edge of the image. This function is especially useful when a wide-angle lens is used.
Notes
This function is not available when a teleconverter or an extension tube is attached to the camera. At higher ISO settings, noise in image edges may be conspicuous.
K SET You can combine 3 image sizes and 4 compression rates and register 4 combinations. Select the registered setting with [K]. gSelecting the record mode (P. 62)
Register 4 different combinations of image settings.
DSET
1 2 3 4
W N
W SF Yarge GO
SELECT
9
Customizing your camera
PIXEL COUNT You can set the pixel size for the image size [X], [W]. [Xiddle] Select [3200 2400], [2560 1920], or [1600 1200]. [Wmall] Select [1280 960], [1024 768], or [640 480].
Custom Menu 1
QUICK ERASE
h RECORD/ERASE
You can erase the picture you have just taken immediately using the S button. [OFF] When the S button is pressed, the confirmation screen appears, asking you if you want to erase the picture. [ON] Pressing the S button erases the picture immediately.
96
EN
RAW+JPEG ERASE You can select the method to erase images recorded in RAW+JPEG. This function can only be used to erase one frame. [JPEG] Erases all JPEG image files, leaving only the RAW image files. [RAW] Erases all RAW image files, leaving only the JPEG image files. [RAW+JPEG] Erases both image file types.
Notes
This function is effective only if deleting one frame. For all-frame erase or erasing selected frames, both RAW and JPEG will be erased regardless of this setting.
FILE NAME When you take a picture, the camera assigns it a unique file name and saves it in a folder. File names are assigned as shown in the illustration below.
[AUTO] Even when a new card is inserted, the folder numbers are retained from the previous card. If the new card contains an image file whose file number coincides with one saved on the previous card, the new cards file numbers start at the number following the highest number on the previous card. [RESET] When a new card is inserted, folder numbers start at 100 and file numbers start at 0001. If a card containing images is inserted, the file numbers start at the number following the highest file number on the card.
When both the Folder and File No. reach their respective maximum number (999/9999), it is not possible to store additional pictures even if the card is not full. No more pictures can be taken. Replace the card with a new one.
9
Customizing your camera
PRIORITY SET You can customize the initial position of the cursor ([YES] or [NO]) on the Erasing images or Formatting the card screen. dpi SETTING You can set the resolution for printing images in advance. The set value is recorded on the card with the images. [AUTO] Automatically set according to the image size. [CUSTOM] You can make the desired setting. Press d to display the setting screen.
97
EN
Custom Menu 1
CLEANING MODE CU/HI
i K UTILITY
gP. 120
You can replace [j] (SPORT) and [/] (NIGHT+PORTRAIT) on the mode dial with [H] (UNDERWATER MACRO) and [I] (UNDERWATER WIDE). To use the camera for underwater shooting, use the optional underwater case.
Custom Menu 2
X (Date/time setting) CF/xD You can select which card to use when both a CompactFlash and xD-Picture Card are loaded. EDIT FILENAME You can rename image files to make them easier to identify and organize. The portion of the filename that can be changed depends on the color space. gCOLOR SPACE (P. 96) gP. 15
sRGB : Pmdd0000.jpg
AdobeRGB : _mdd0000.jpg
s (Monitor brightness adjustment) You can adjust the brightness and color temperature of the monitor. Color temperature adjustment will affect only the LCD monitor display during playback. Use bd to switch between k (brightness) and j (color temperature), and use ac to adjust the value between [+7] - [-7].
5 +2
9
Customizing your camera
CANCEL
SELECT
GO
W (Changing the display language) You can change the language used for the on-screen display and error messages from ENGLISH to another language. You can add another language to your camera with the provided OLYMPUS Master software. For details, refer to Help in OLYMPUS Master software. gUsing the OLYMPUS Master software (P. 106)
98
EN
VIDEO OUT You can select NTSC or PAL according to your TVs video signal type. You will need to set this when you want to connect the camera to a TV and play back images in a foreign country. Make sure the correct video signal type is selected before connecting the video cable. If you use the wrong video signal type, recorded pictures will not play back properly on your TV. TV video signal types in major countries and regions Check the video signal type before connecting the camera to your TV.
NTSC PAL North America, Japan, Taiwan, Korea European countries, China
REC VIEW You can display the picture you have just taken on the monitor while it is being recorded to the card, and to select how long the picture is displayed. This is useful for making a brief check of the picture you have just taken. Pressing the shutter button halfway while checking the picture lets you resume shooting immediately. [1SEC] [20SEC] Selects the number of seconds to display each picture. Can be set in units of 1 second. [OFF] The picture being recorded to the card is not displayed. [AUTOq] Displays the image being recorded, and then switches to playback mode. This is useful for erasing a picture after checking it. PIXEL MAPPING FIRMWARE Your products firmware version will be displayed. When you make inquiries about your camera or accessories or when you want to download software, you will need to state which version of each of the products you are using. Press d. Your products firmware version will be displayed. Press the i button to return to the previous screen. gP. 120
9
Customizing your camera
99
EN
10
Printing
Print reservation (DPOF)
Print reservation
Print reservation allows you to save printing data (the number of prints and the date/time information) with the pictures stored on the card. Pictures set with print reservation can be printed using the following methods. Printing using a DPOF-compatible photo lab You can print the pictures using the print reservation data. Printing using a DPOF-compatible printer Pictures can be printed directly from a dedicated printer without using a PC. For more details, refer to the printers manual. A PC card adapter may also be necessary.
Notes
DPOF reservations set by another device cannot be changed by this camera. Make changes using the original device. Moreover, setting new DPOF reservations using this camera will erase the previous reservations set by another device. Not all functions may be available on all printers or at all photo labs. RAW data are not printable.
Single-frame reservation
Follow the operation guide to set print reservation for a picture.
MENU
[q] [<]
ON EDIT COPY ALL RESET PROTECT
Operation guide
CANCEL
SELECT
GO
10
Printing
CANCEL
SELECT
GO
Press bd to select the frame that you want to set as print reservation, then press ca to set the number of prints.
To set print reservation for several pictures, repeat this step.
4
100
EN
CANCEL
SELECT
GO
Select the date and time format and press the i button.
[NO] The pictures are printed without the date and time. [DATE] The pictures are printed with the shooting date. [TIME] The pictures are printed with the shooting time.
SET CANCEL
CANCEL
SELECT
GO
All-frame reservation
Applies print reservation to all the pictures stored in the card. The number of prints is fixed at 1.
1 2 3 4
MENU [q] [<] Select [U] and press the i button. Select the date and time format and press the i button.
[NO] The pictures are printed without the date and time. [DATE] The pictures are printed with the shooting date. [TIME] The pictures are printed with the shooting time.
1 2 3
MENU [q]
[<]
Resetting the print reservation data for all pictures Select [<] or [U] and press the i button. Select [RESET] and press the i button.
10
Printing
101
EN
2 3 4 5 6 7
Select [<] and press the i button. Select [KEEP] and press the i button. Use bd to select the frame with print reservation data you want to reset, then press c to set the number of prints to 0. Press the i button when you have finished. Select the date and time format and press the i button.
This setting is applied to all frames with print reservation data.
Notes
Use a fully charged battery for printing. Images recorded in RAW data cannot be printed. The camera will not enter sleep mode while it is connected to the USB cable.
10
Printing
102
EN
Turn the printer on and connect the cameras multi-connector to the printers USB port with the USB cable.
For details on how to turn the printer on and the position of the USB port, refer to the printers manual.
USB cable
Multi-connector
2 3
Use p to select [EASY PRINT] or [CUSTOM PRINT]. If you select [EASY PRINT]
Go to Easy printing (gP. 103)
Notes
If the screen is not displayed after a few minutes, disconnect the USB Cable and start again from Step 1.
Easy printing
1 2
10
Printing
EASY PRINT START PC / CUSTOM PRINT
103
EN
Custom printing
Follow the operation guide to set a print option. Selecting the print mode
PRINT Select the type of printing (print mode). The available print ALL PRINT modes are as shown below. MULTI PRINT [PRINT] Prints selected pictures. [ALL PRINT] Prints all the pictures stored in the ALL INDEX card and makes one print for each PRINT ORDER picture. EXIT SELECT GO [MULTI PRINT] Prints multiple copies of one image in separate frames on a single sheet. Follow the operation guide displayed [ALL INDEX] Prints an index of all the pictures here. stored in the card. [PRINT ORDER] Prints according to the print reservation you made. If there is no picture with print reservation, this is not available. (gP. 100)
STANDARD
STANDARD
CANCEL
[PICS/SHEET] Selects the number of pictures per sheet. Displayed when you have selected [MULTI PRINT].
SELECT
GO
CANCEL
SELECT
GO
10
Printing
104
EN
SELECT
SET
GO
Once you have set the pictures for printing and printing data, select [PRINT], then press the i button.
[PRINT] [CANCEL] Transfers images you print to the printer. Resets the settings. All print reservation data will be lost. If you want to keep the print reservation data and make other settings, press b. This returns you to the previous setting.
PRINT CANCEL
CANCEL
To stop and cancel printing, press the i button. [CONTINUE] Continues printing. [CANCEL] Cancels printing. All print reservation data will be lost.
SELECT
GO
CONTINUE CANCEL
SELECT
GO
10
Printing
105
EN
11
Installing OLYMPUS Master (Refer to the installation guide included with the OLYMPUS Master) Connecting the camera with your computer using the provided USB cable Starting OLYMPUS Master Saving pictures to your computer Disconnecting the camera from your computer Using the OLYMPUS Master software (gP. 107) (gP. 108) (gP. 108) (gP. 108)
11
For information about OLYMPUS Masters other features, as well as for details on how to use the software, refer to Help in OLYMPUS Master software.
106
EN
Use the provided USB cable to connect the computers USB port to the cameras multi-connector.
The location of the USB port varies with the computer. For details, refer to your computers manual.
Terminal
2 3 4
Press ac to select [STORAGE]. Press the i button. The computer recognizes the camera as a new device. Windows
SELECT GO When you connect the camera to the computer for the first time, the computer automatically recognizes the camera. Click OK when the message saying that the installation is completed appears. The computer recognizes the camera as a Removable Disk .
Macintosh
iPhoto is the default image management application for Mac OS. When you connect your Olympus digital camera for the first time, iPhoto will start up automatically. Close iPhoto and start OLYMPUS Master.
Notes
When the camera is connected to the computer, none of the camera buttons are functional.
11
107
EN
1 1
on the desktop.
Macintosh Double-click the OLYMPUS Master 2 icon folder. in the OLYMPUS Master 2
The browse window is displayed. When OLYMPUS Master is started up for the first time after installation, the OLYMPUS Master initial setting screen and user registration screen are displayed before the browse window. Follow the on-screen instructions.
Click Exit
on any window.
1
Using the OLYMPUS Master software
The window for selecting the pictures you want to transfer from the camera is displayed. All the images in the camera are displayed.
2 3
Select New Album and enter an album name. Select the image files and click Transfer Images.
A window indicating that the download is complete is displayed.
11
Make sure that the card access lamp has stopped blinking.
108
EN
Macintosh
1) The trash icon changes to the eject icon when the Untitled or NO_NAME icon on the desktop is dragged. Drag and drop it on the eject icon.
3
x
1 2
Click the Album tab on the browse window and select the album that you want to view.
The selected album image is displayed in the thumbnail area.
Thumbnail
11
109
EN
1 2 3 4 5 6 7
Make sure that your computer is connected to the Internet. Plug the USB cable into the USB port on the computer. Plug the other end of the USB cable into the cameras multi-connector.
The camera turns on automatically. The monitor turns on and the selection screen for the USB connection is displayed.
Select [STORAGE] and press the i button. In the browse window, select Camera, then Update Camera/Add Display Language.
The confirmation window for updating is displayed.
Click OK.
The updating the camera window is displayed.
11
110
EN
8 9
will show OK. You can remove the cables and turn power off. After restarting the camera you will be able to choose the new language from [W].
Notes
If your computer is running Windows Vista, select [MTP] in Step 3 on page 107 to use Windows Photo Gallery. Data transfer is not guaranteed in the following environments, even if your computer is equipped with a USB port. Computers with a USB port added by means of an extension card, etc. Computers without a factory-installed OS and home-built computers
12
No picture is taken when the shutter button is pressed The camera has turned off automatically
To save battery power, if there is no operation, the camera goes into sleep mode after a fixed period of time and the camera stops operating. The camera activates again when you touch the shutter button or any other button. The camera will turn off automatically if there is no further operation for 4 hours. The camera will not work until it is turned back on. gSLEEP (P. 93), 4 h TIMER (Auto power off) (P. 93)
When the flash is raised, the # symbol blinking in the super control panel or the viewfinder indicates that the flash is charging. Wait for the blinking to stop, then press the shutter button. When the AF confirmation mark in the viewfinder is blinking, it indicates that the camera is unable to focus using AF. Press the shutter button again.
The date and time has not been set The camera is used with the settings at the time of purchase
The date and time of the camera is not set when purchased. Set the date and time before using the camera. gSetting the date/time (P. 15)
Shooting tips
Focusing on the subject There are several ways to focus, depending on the subject. AF target is not focused on the subject
12
Use focus lock to focus the AF target on the subject. gFocus lock k If correct focus cannot be obtained (P. 56)
111
EN
Other things instead of the subject are in focus on the respective AF targets The subject is moving quickly
Set [AF AREA] to R and focus on the center of the image. gAF target selection (P. 54) Focus the camera on a point roughly the same distance away as the subject you want to shoot (by pressing the shutter button halfway), and then recompose your picture and wait for the subject to enter the frame.
Subjects that are difficult to focus on It may be difficult to focus with auto focus in the following situations.
AF confirmation mark is blinking. These subjects are not focused. Subject with low contrast AF confirmation mark lights up but the subject is not focused. Excessively bright light in center of frame Subject with repeated patterns
Fast-moving subject
In any situation, focus on something with high contrast that is at the same distance as the subject, determine the composition and shoot the picture. Taking pictures without blurring There are several factors that can cause the picture to blur. The subject is too dark
Change the shutter speed to match the brightness of the subject. If the shutter speed is set low to shoot a dark subject, blurring is likely to occur if the subject moves. In addition, when the flash is turned off in g (Scene mode), the shutter speed becomes slower. Mount the camera on a tripod. Using the remote control (optional) to close the shutter is also effective for reducing blurring. There are also ways to shoot with [q] (DIS MODE) under g (Scene mode). As the ISO sensitivity increases automatically, you can hand hold the camera and take pictures in low light situations with the flash off.
12
112
EN
The camera or your hand moves when pressing the shutter button
Press the shutter button gently or hold the camera securely with both hands. Use the image stabilizer function. gImage stabilizer (P. 60) You can avoid camera movement while pressing the shutter button by using self-timer or antishock. gSelf-timer shooting (P. 58), Anti-shock (P. 60)
Taking pictures with less flash When using auto flash, the flash will light up automatically when it is not bright enough and camera blur is more likely to occur. If the subject is too far away, the flash may have no effect. Here is how to take pictures without the flash in this type of situation.
Set g (Scene mode) to [q] (DIS MODE) Increase the ISO setting
As the ISO sensitivity increases automatically, you can hand hold the camera and take pictures in low light situations with the flash off. Increase the value of the ISO setting. The image may become grainy. gISO sensitivity setting (P. 51)
Image taken appears whitish This may occur when the picture is taken in backlight or semi-backlight conditions. This is due to a phenomenon called flare or ghosting. As far as possible, consider a composition where strong light source is not taken in the picture. Flare may occur even when a light source is not present in the picture. Use a lens hood to shade the lens from the light source. If a lens hood does not have effect, use your hand to shade the lens from the light. gInterchangeable lenses (P. 122) Taking pictures with the correct color The reason why there are differences between the colors in a picture and the actual colors taken and the actual color is the light source illuminating the subject. [WB] is the function that allows the camera to determine the correct colors. Normally, the [AUTO] setting provides the optimal white balance, but depending on the subject, it may be better to experiment with changing the [WB] setting.
When the subject is in the shade on a sunny day When the subject is illuminated by both natural light and indoor lighting, such as when near a window When there is no white in the frame gSelecting the white balance (P. 64)
Taking pictures of a white beach or snow scene In normal cases, white subjects such as snow will appear darker than usual when the picture is taken. There are several ways to capture the whiteness.
Adjust the exposure compensation toward [+]. gExposure compensation (P. 48) Use [g] (BEACH & SNOW) in g (Scene mode) to take the picture. It is most suitable for taking pictures of the sea in a sunny day or snow-capped mountains. gMode dial (P. 4) Use [nHI] (Spot metering highlight control). Press the shutter button halfway at the center of the viewfinder where you wish to highlight the whiteness. The metered part at the center will be set to appear whiter. gChanging the metering mode (P. 47) Use the AE bracketing function to take the picture. If you do not know the amount of exposure compensation, try using AE bracketing. The compensation value changes a little every time you press the shutter button. If you set a larger exposure compensation, you can change the compensation value either upwards or downwards based on that value and shoot the picture. gAE bracketing (P. 50)
12
113
EN
Taking pictures of a subject against backlight If the background is too bright compared to the subject, the exposure will be affected at the bright parts and the subject will appear darker. This is because the camera determines the exposure from the brightness of the whole screen.
Set [METERING] to [n] (spot metering) to measure the exposure of the subject in the center of the picture. To change the composition, place the subject in the center of the picture. While holding down the AEL/AFL button, change the composition and press the shutter button. gChanging the metering mode (P. 47) Activate the flash, set the flash mode to [#] (fill-in flash) and shoot the picture. You can shoot a subject against backlight without the face of the subject appearing dark. [#] (fill-in flash) is used for shooting against backlight and under fluorescent and other artificial lighting. gFlash mode setting (P. 70)
Image turns out too bright or too dark When taking pictures in S mode or A mode, the displayed shutter speed or aperture setting may blink. A blinking display means that the correct exposure cannot be obtained. If you take the picture as is, the picture will appear too bright or too dark. If that happens, change the aperture setting or shutter speed. gAperture priority shooting (P. 44), Shutter priority shooting (P. 44), Exposure warning display (P. 125) Unknown bright dot(s) appear on the subject in the picture taken This may be due to stuck pixel(s) on the image pickup device. Perform [PIXEL MAPPING]. If the problem persists, repeat pixel mapping a few times. gPixel mapping k Checking the image processing functions (P. 120)
12
114
EN
Using a new card If you use a non-Olympus card or a card used for another application, such as for a computer, the message [CARD ERROR] is displayed. To use this card with this camera, use the [FORMAT] function to format the card. gFormatting the card (P. 121)
Extending the useful life of the battery Performing any of the following operations when not actually taking pictures can deplete the battery power.
Repeatedly pressing the shutter button halfway Repeatedly playing back the captured images over a long period of time Using the live view function over a long period
To save battery power, turn off the camera whenever it is not in use. Functions that cannot be selected from menus Some items may not be selectable from the menus when using the arrow pad.
Items that cannot be set with the current shooting mode Items that cannot be set because of an item that has already been set: Combination of [j] and [NOISE REDUCT.], etc.
Cannot use the Imager AF Imager AF is available only when using compatible lenses. For the latest information about Olympus lenses compatible with Imager AF, visit the Olympus website. Selecting the optimal record mode Record modes are divided into 2 main types: RAW and JPEG. RAW records without reflecting the settings for white balance, contrast, etc. on the images themselves. JPEG records as images that reflect these settings. JPEG also compresses images to reduce the file size when recording them. For JPEG, you can register four combinations of images sizes (Y, X, W) and compression rates (SF, F, N, B) from the 12 total combinations available. The higher the compression rate, the grainier the image will appear when enlarged during display. A rough guide for selection is shown below. To make fine-adjustments of the shooting settings on the computer
[RAW]
To print large images on A3/A4 paper/To edit and process images on a computer
Images size Y and compression rate SF, F, N, or B
gRecord mode and file size/number of storable still pictures (P. 128) To restore functions to their settings at the time of purchase The settings are saved even when the power is switched off. To return to the factory default settings, set [RESET] under [CUSTOM RESET] (even so, the settings of some functions, like the [CONTRAST] settings, will be saved nonetheless). You can register up to two types of settings to be reset. Set various functions of the camera and register using [RESET1] or [RESET2] under [CUSTOM RESET]. gResetting to the factory default settings (P. 30)
12
115
EN
Confirming the exposure when it is difficult to view the monitor outdoors The monitor may be difficult to view and the exposure difficult to confirm when shooting outdoors. During live view, press the INFO button repeatedly to display the histogram. The following shows you how to read the histogram display easily.
How to read the histogram 1 If the graph has many peaks around here, the image will appear mostly black. 2 If the graph has many peaks around here, the image will appear mostly white. 3 The part indicated in green in the histogram shows the luminance distribution within the spot metering area. gSwitching the information display (P. 40)
1 2
Leaving set functions in the camera so that they can be used later You can register up to two current camera settings in [MY MODE SETUP]. To shoot using My Mode settings, [; FUNCTION] must be set to [MY MODE]. After setting, shoot while pressing the < button. g; FUNCTION (P. 91), MY MODE SETUP (P. 92)
Playback tips
Understanding the settings and other information of pictures taken Play back a picture, and press the INFO button. Press the button repeatedly to change the amount of information displayed. gInformation display (P. 82)
12
116
EN
To view recorded images in RAW Install the OLYMPUS Master software from the provided CD-ROM. You can use the RAW development function in OLYMPUS Master to develop the RAW image in the camera setting used during shooting, as well as change detailed settings such as white balance and contrast.
Error codes
Viewfinder indications Normal indication NO CARD Monitor indication Possible cause The card is not inserted, or it cannot be recognized. There is a problem with the card. CARD ERROR Writing to the card is prohibited. WRITE PROTECT The card is full. No more pictures can be taken or no more information such as print reservation can be recorded. CARD FULL There is no space in the card and print reservation or new images cannot be recorded. xD-Picture Cards cannot be read or is not formatted. Corrective action Insert a card or insert a different card.
Insert the card again. If the problem persists, format the card. If the card cannot be formatted, it cannot be used. The card has been set to read-only setting with the computer. Reset the card with the computer. Replace the card or erase unwanted pictures. Before erasing, download important images to a PC. Replace the card or erase unwanted pictures. Before erasing, download important images to a PC. Select [xD CARD CLEAN], press the i button and turn off the camera. Remove the card and wipe dry the metallic surface with a soft, dry cloth. Select [FORMAT] [YES], and then press the i button to format the card. Formatting the card erases all data on the card. The card contains no pictures. Record pictures and play back.
No indication
CARD SETUP
No indication
Clean the terminal of the xD card with the dry cloth. xD CARD CLEAN FORMAT SELECT GO
No indication NO PICTURE
12
117
EN
Viewfinder indications
Monitor indication
Possible cause The selected picture cannot be displayed for playback due to a problem with this picture. Or the picture cannot be used for playback on this camera. Pictures taken with another camera cannot be edited on this camera. Extended use of live view or sequential shooting has increased the internal temperature of the camera.
Corrective action Use image processing software to view the picture on a PC. If that cannot be done, the image file is damaged.
No indication
No indication
Internal camera temperature is too high. Please wait for cooling before camera use.
Wait a moment for the camera to turn off automatically. Allow the internal temperature of the camera to cool before resuming operations. Close the card cover.
The card cover is open. CARD-COVER OPEN The battery is drained. No indication BATTERY EMPTY The camera is not connected to the computer or printer correctly. There is no paper in the printer. NO PAPER The printer has run out of ink. No indication NO INK The paper is jammed. No indication JAMMED
No indication NO CONNECTION
Disconnect the camera and connect it again correctly. Load some paper in the printer.
12
118
EN
No indication
Viewfinder indications
Monitor indication
Possible cause The printers paper cassette has been removed or the printer has been manipulated while making settings on the camera. There is a problem with the printer and/or camera.
Corrective action Do not manipulate the printer while making settings on the camera.
No indication
SETTINGS CHANGED
Turn off camera and printer. Check the printer and remedy any problems before turning the power on again. Use a personal computer to print.
Camera maintenance
Cleaning and storing the camera
Cleaning the camera Turn off the camera and remove the battery before cleaning the camera. Exterior:
Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and well wrung.
Storage When not using the camera for a prolonged period, remove the battery and card. Store the camera in a cool, dry place that is well ventilated. Insert the battery periodically and test the cameras functions. Cleaning and checking the image pickup device This camera incorporates a dust reduction function to keep dust from getting on the image pickup device and to remove any dust or dirt from the image pickup device surface with ultrasonic vibrations. Dust reduction is activated when the power switch is set to ON and when starting and stopping live view. The dust reduction function operates at the same time as the pixel mapping, which checks the image pickup device and image processing circuitry. Since dust reduction is activated every time the cameras power is turned on, the camera should be held upright for the dust reduction function to be effective. The SSWF indicator blinks while dust reduction is working. gSSWF indicator (P. 14)
12
119
EN
Notes
Do not use strong solvents such as benzene or alcohol, or a chemically treated cloth. Avoid storing the camera in places where chemicals are treated, in order to protect the camera from corrosion. Mold may form on the lens surface if the lens is left dirty. Check each part of the camera before use if it has not been used for a long time. Before taking important pictures, be sure to take a test shot and check that the camera works properly.
1 2 3 4 5 6
x
Shooting tips and maintenance
Remove the lens from the camera, and set the power switch to ON. MENU [Y] [i] [CLEANING MODE] Press d, then press the i button.
The camera enters the cleaning mode.
CANCEL SELECT Carefully blow off any dust on the surface of the image pickup device by using a mechanical blower (commercially available).
GO
Be careful not to catch the mechanical blower in the shutter curtain when turning the power off to finish cleaning.
If the camera turns off, the shutter curtain closes, causing the mirror to fall.
Notes
Be careful not to let the mechanical blower (commercially available) touch the image pickup device. If the blower touches the image pickup device, the image pickup device will be damaged. Never put the mechanical blower behind the lens mount. If the power turns off, the shutter closes, breaking the shutter curtain. Do not use anything other than the mechanical blower. If high-pressure gas is sprayed onto the image pickup device, it will freeze on the image pickup devices surface, damaging the image pickup device.
12
1 2
x
120
EN
Notes
If you accidentally turn the camera off during pixel mapping, start again from Step 1.
13
Information
Card basics
Usable cards
Card in this manual refers to a recording medium. This camera can use CompactFlash, Microdrive or xD-Picture Card (optional). CompactFlash
A CompactFlash is a largecapacity solid state flash memory card. You can use commercially available cards.
Microdrive
A Microdrive is a medium that uses a large-capacity compact hard disk drive. You can use a Microdrive that supports CF+Type II (CompactFlash extension standard).
xD-Picture Card
Precautions when using a Microdrive A Microdrive is a medium that uses a compact hard disk drive. Because the disk drive rotates, a Microdrive is not as resistant to vibration or impact as other cards. Special care is needed when using a Microdrive (especially during recording and playback) to make sure the camera is not subjected to shock or vibrations. Be sure to read the following precautions before using a Microdrive. Also, refer to the manuals provided with your Microdrive. Be very careful when putting the camera down during recording. Place it gently on a firm surface. Do not use the camera in places subject to vibrations or excessive shock, such as at a construction site or in a car while driving along a bumpy road. Do not take a Microdrive close to areas where it may be exposed to strong magnetism. The Microdrive may not function correctly under low air pressure conditions, like in altitudes of 3,000 m (9,843 ft.) and higher.
Notes
The data in the card will not be erased completely even after formatting the card or deleting the data. When discarding, destroy the card to prevent leakage of personal information.
1 2 3
MENU [W] [CARD SETUP] Use ac to select [FORMAT], then press the i button. Use ac to select [YES], then press the i button.
Formatting is performed. TIPS
CARD SETUP
13
GO
CANCEL
SELECT
121
EN
Interchangeable lenses
Select the lens that you want to shoot with. Use a specified Four Thirds lens (Four Thirds mount). When a non-specified lens is used, auto focus and light metering will not function correctly. In some cases, other functions may not work either. Four Thirds mount Developed by Olympus as the lens mount standard for the Four Thirds system. These all-new interchangeable lenses featuring the Four Thirds mount were developed from the ground up based on optic engineering exclusively for digital cameras.
13
122
EN
Focal length At the same focal length of a 35-mm camera, a Four Thirds system camera can achieve a focal length equivalent to twice that of a 35-mm camera. This enables the design of compact telephoto lenses. A 14-50 mm Four Thirds system lens, for example, is equivalent to a 28100 mm lens for a 35-mm camera. When the image angle of Four Thirds system lens is converted to that of a 35-mm camera, the perspective is the same as that of a 35-mm camera. Depth of Field A Four Thirds system camera can achieve a depth of field equivalent to two times deeper than that of a 35-mm camera. This enables more light to enter through the aperture. A Four Thirds system lens with f2.0 brightness, for example, is equivalent to f4.0 when converted to the aperture of a 35-mm camera. You can achieve the same amount of background blur as if you were using a 35-mm camera.
Notes
When you attach or remove the body cap and lens from the camera, keep the lens mount on the camera pointed downward. This helps prevent dust and other foreign matter from getting inside the camera. Do not remove the body cap or attach the lens in dusty places. Do not point the lens attached to the camera toward the sun. This may cause the camera to malfunction or even ignite due to the magnifying effect of sunlight focusing through the lens. Be careful not to lose the body cap and rear cap. Attach the body cap to the camera to prevent dust from getting inside when no lens is attached.
13
Use the hood when shooting a backlit subject. The lens hood cannot be attached to the 17.5 - 45 mm lens.
123
EN
Main Specifications
Items Mount Focal length Max. aperture Image angle Lens configuration Iris control Shooting range Focus adjustment Weight (excluding hood and cap) Dimensions (Max. diameter overall length) Lens hood mount Filter mount thread diameter 210 g l71 70 mm k 52 mm 17.5 - 45 mm f3.5 - 5.6 63 - 27 7 groups, 7 lenses f3.5 - 22 0.28 m - ) 17.5-45 mm 14-42 mm FOUR THIRDS mount 14 - 42 mm f3.5 - 5.6 75 - 29 8 groups, 10 lenses f3.5 - 22 0.25 m - ) AF/MF switching 190 g l65.5 61 mm 220 g l65.5 72 mm 40 - 150 mm f4 - 5.6 30 - 8.2 9 groups, 12 lenses f4 - 22 0.9 m - ) 40-150 mm
Bayonet 58 mm
Can be used with the optional EX-25 extension tube under the following conditions. The focus adjustment when EX-25 is used will be MF.
Lens, focal length 17.5 mm 17.5-45 mm 28 mm 45 mm 14 mm 14-42 mm 25 mm 42 mm 40 mm 40-150 mm 80 mm 150 mm Shooting range Magnification ( ): Calculated based on 35 mm film camera
Shooting is not possible since subjects cannot be brought into focus at this focal length. 15.1 cm - 15.9 cm 18.4 cm - 22.4 cm 0.89 - 1.16 (1.78 - 2.32) 0.57 - 0.91 (1.14 - 1.82)
Shooting is not possible since subjects cannot be brought into focus at this focal length. 13.3 cm 16.2 cm - 17.3 cm 19.0 cm - 20.4 cm 28.0 cm - 40.6 cm 48.0 cm - 118.8 cm 1.02 (2.04) 0.61 - 0.69 (1.22 - 1.38) 0.61 - 0.70 (1.22 - 1.40) 0.32 - 0.48 (0.64 - 0.96) 0.17 - 0.39 (0.34 - 0.78)
Storage Precautions Clean the lens after use. Remove dust and dirt on the surface of the lens with a blower brush or brush. Use commercially available lens cleaning paper to remove the dirt on the lens. Do not use organic solvents. Always cap the lens and store it when it is not used. Do not store in an area with insect repellent.
13
124
EN
Information
Notes on Shooting
Edges of pictures may be cut off if more than one filter is used or if a thick filter is used.
Program shift
Decrease the ISO sensitivity. Use a commercially available ND filter (for adjusting the amount of light).
Information
Increase the aperture value. Decrease the ISO sensitivity or use a commercially available ND filter (for adjusting the amount of light).
13
125
EN
Shooting mode
Status
Action
The subject is underexposured. Set the shutter speed slower. Increase the ISO sensitivity.
The subject is overexposured. Set the shutter speed faster. Decrease the ISO sensitivity or use a commercially available ND filter (for adjusting the amount of light).
* The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens.
Auto flash Auto flash (red-eye reduction) Fill-in flash Flash off Slow synchronization (red-eye reduction) Slow synchronization (1st curtain) Slow synchronization (2nd curtain) Manual flash (FULL) Manual flash (1/4) Manual flash (1/16) Manual flash (1/64) Fill-in flash Fill-in flash (red-eye reduction) Flash off k 1st curtain
1st curtain
2nd curtain
1st curtain
Always fires
13
126
EN
Information
Shooting mode
Super control panel screen display 2nd CURTAIN # FULL # 1/4 # 1/16 # 1/64
Flash mode Fill-in flash/Slow synchronization (2nd curtain) Manual flash (FULL) Manual flash (1/4)
Conditions to timing
2nd curtain
S M
*1 When the flash is set to the Super FP mode, it detects backlight with longer duration than for normal flash before emitting light. gSuper FP flash (P. 76) *2 AUTO, !, # cannot be set in NIGHT+PORTRAIT mode.
Information
13
127
EN
Compression
File format
RAW YSF YF YN YB XSF XF XN XB XSF XF XN XB XSF XF XN XB WSF WF WN WB WSF WF WN WB WSF WF WN WB 3648 2736
3200 2400
2560 1920
1600 1200
1280 960
1024 768
640 480
Loss-less compression 1/2.7 1/4 1/8 1/12 1/2.7 1/4 1/8 1/12 1/2.7 1/4 1/8 1/12 1/2.7 1/4 1/8 1/12 1/2.7 1/4 1/8 1/12 1/2.7 1/4 1/8 1/12 1/2.7 1/4 1/8 1/12
ORF
Approx. 11 Approx. 6.8 Approx. 4.7 Approx. 2.2 Approx. 1.5 Approx. 5.3 Approx. 3.7 Approx. 1.7 Approx. 1.1 Approx. 3.6 Approx. 2.2 Approx. 1.1 Approx. 0.7 Approx. 1.3 Approx. 0.8 Approx. 0.5 Approx. 0.3 Approx. 0.8 Approx. 0.5 Approx. 0.3 Approx. 0.2 Approx. 0.5 Approx. 0.4 Approx. 0.2 Approx. 0.1 Approx. 0.2 Approx. 0.2 Approx. 0.1 Approx. 0.1
JPEG
Notes
The number of remaining pictures may change according to the subject or factors like whether print reservations have been made or not. In certain instances, the number of remaining pictures displayed on the viewfinder or the LCD monitor does not change even when you take pictures or stored images are erased. The actual file size varies according to the subject. The maximum number of storable still pictures displayed on the monitor is 9999.
13
128
EN
Information
Functions that can be registered with My Mode and Custom Reset Setting
Function F Image stabilizer j/Y/<* AF MODE AF AREA AE BKT WB BKT FL BKT PICTURE MODE GRADATION K NOISE REDUCT. WB > METERING ISO NOISE FILTER Flash mode #RC MODE w AF ILLUMINAT. FOCUS RING RESET LENS BULB FOCUSING LIVE VIEW AF MODE DIAL FUNCTION DIAL DIRECTION AEL/AFL AEL/AFL MEMO j FUNCTION ; FUNCTION MY MODE SETUP BUTTON TIMER A RLS PRIORITY S RLS PRIORITY C 8 : Can be registered. * Includes anti-shock. k k: Cannot be registered. k k k k k k k k k k k k k k k k Custom My Mode reset setting registration registration Function SLEEP BACKLIT LCD 4 h TIMER USB MODE LIVE VIEW BOOST g FACE DETECT FRAME ASSIST EV STEP ISO-AUTO SET ISO-AUTO AELMetering BULB TIMER #X-SYNC. #SLOW LIMIT w+F AUTO POP UP ALL > COLOR SPACE SHADING COMP. K SET PIXEL COUNT QUICK ERASE RAW+JPEG ERASE FILE NAME PRIORITY SET dpi SETTING CLEANING MODE CU/XY X CF/xD EDIT FILENAME s W VIDEO OUT REC VIEW PIXEL MAPPING FIRMWARE k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k k Custom My Mode reset setting registration registration k k k k k k
Information
k k k k
13
129
EN
Menu directory
Shooting Menu
Tab Function CARD SETUP ALL ERASE/FORMAT RESET CUSTOM RESET RESET1 RESET2 PICTURE MODE GRADATION K SET/RESET SET/RESET P. 67 P. 68 P. 62 P. 30 Setting Ref. page P. 88 P. 121
hVIVID/iNATURAL*/jMUTED/ZPORTRAIT/ MONOTONE/CUSTOM AUTO/NORMAL*/HIGH KEY/LOW KEY RAW/YF/YN*/XN/WN/RAW+YF/RAW+YN/RAW+XN/ RAW+WN A -7 - +7, G -7 - +7 AUTO* 5 5300K 2 7500K 3 6000K 1 3000K A -7 - +7, G -7 - +7 A -7 - +7, G -7 - +7 A -7 - +7, G -7 - +7 A -7 - +7, G -7 - +7 A -7 - +7, G -7 - +7 A -7 - +7, G -7 - +7 A -7 - +7, G -7 - +7 A -7 - +7, G -7 - +7 A -7 - +7, G -7 - +7 2000K - 14000K
WB
P. 64
P. 51 P. 69 P. 69 ESP + AF/ESP* P. 47
OFF/LOW/STANDARD*/HIGH e* J
METERING
5 5HI 5SH
OFF*/ON -3.0 - 0.0* - +3.0 S-AF*/C-AF/MF/S-AF+MF/C-AF+MF AUTO*/Q/R/S OFF*/1SEC - 30SEC OFF*/3F 0.3EV/3F 0.7EV/3F 1.0EV A-B OFF*/3F 2STEP/3F 4STEP/ 3F 6STEP G-M OFF*/3F 0.3EV/3F 0.7EV/3F 1.0EV
P. 76 P. 74 P. 52 P. 54 P. 60 P. 50 P. 67 P. 74
13
130
EN
Information
Playback Menu
Tab Function m y EDIT < COPY ALL RESET PROTECT * Factory default setting OFF/ON* RAW DATA EDIT JPEG EDIT </U YES/NO YES/NO SHADOW ADJ/REDEYE FIX/P/ BLACK & WHITE/SEPIA/ SATURATION/Q Setting K/L/M/N/O/h/i Ref. page P. 83 P. 83 P. 84 P. 100 P. 86 P. 87
Custom Menu 1
Tab a Function AF/MF AF ILLUMINAT. FOCUS RING RESET LENS BULB FOCUSING LIVE VIEW AF MODE BUTTON/DIAL Setting OFF/ON* b*/c OFF/ON* OFF/ON* AF SENSOR/HYBRID AF/IMAGER AF* P A S M DIAL1*/DIAL2 S-AF* %*/F FNo.*/F SHUTTER*/F SHUTTER/FNo.* mode1*/mode2/mode3 mode1/mode2*/mode3/mode4 mode1*/mode2/mode3 Ref. page P. 89 P. 89 P. 89 P. 89 P. 89 P. 37 P. 89
DIAL FUNCTION
P. 89
DIAL DIRECTION AEL/AFL AEL/AFL MEMO ; FUNCTION j FUNCTION MY MODE SETUP BUTTON TIMER A nLOCK c RELEASE/j RLS PRIORITY S RLS PRIORITY C * Factory default setting
P. 90 P. 90 P. 91 P. 91 P. 92 P. 92 P. 92 P. 92 P. 92 P. 93 P. 93 P. 93
C-AF MF OFF*/ON Fn FACE DETECT*/PREVIEW/LIVE PREVIEW/V/ P HOME/MF/RAWK/TEST PICTURE/MY MODE/ OFF j/</Y*/AF AREA/AF MODE/WB/METERING/ISO MY MODE1/ MY MODE2 3SEC/5SEC/8SEC*/HOLD OFF*/ON OFF*/ON OFF*/ON OFF/ON*
Information
13
131
EN
Tab d
Function DISP/8/PC 8 SLEEP BACKLIT LCD 4 h TIMER USB MODE LIVE VIEW BOOST g FACE DETECT FRAME ASSIST EXP/e/ISO EV STEP ISO-AUTO SET ISO-AUTO AELMetering BULB TIMER # CUSTOM #X-SYNC. #SLOW LIMIT w+F AUTO POP UP K/COLOR/WB ALL > COLOR SPACE SHADING COMP. K SET PIXEL COUNT
Setting OFF/ON* OFF/1MIN*/3MIN/5MIN/10MIN 8SEC*/30SEC/1MIN/HOLD OFF/4 h* AUTO*/STORAGE/MTP/CONTROL/<EASY/ <CUSTOM OFF*/ON OFF*/ON OFF*/GRID/GOLDEN SECTION/SCALE 1/3EV*/1/2EV/1EV 100 - 1600 (400*) P/A/S*/ALL AUTO*/J/5/5HI/5SH k 1/60 - 1/180* 1/30 - 1/180 (1/60*) OFF*/ON OFF/ON* ALL SET ALL RESET sRGB* A -7 - +7 G -7 -+7 YES/NO
/AdobeRGB OFF*/ON P-Q Y/X/W SF/F/N/B Xiddle Wmall 3200 2400/2560 1920*/ 1600 1200 1280 960*/1024 768/640 480
RECORD/ERASE QUICK ERASE RAW+JPEG ERASE FILE NAME PRIORITY SET dpi SETTING i K UTILITY CLEANING MODE CU/HI * Factory default setting h
13
132
EN
Information
Custom Menu 2
Tab X CF/xD EDIT FILENAME s Function k CF*/xD Adobe RGB OFF*/A-Z/0-9 sRGB j -7 - +7 k -7 - +7 Setting Ref. page P. 15 P. 98 P. 98 P. 98 P. 98 P. 99 P. 99 P. 120 P. 99
*1 W *1 VIDEO OUT REC VIEW OFF/AUTOq/1SEC - 20SEC (5SEC*) PIXEL MAPPING k FIRMWARE k * Factory default setting *1 Settings differ depending on the region where the camera is purchased.
Glossary
A (Aperture Priority) Mode You set the aperture yourself and the camera automatically varies the shutter speed so that the picture is taken with the correct exposure. AE (Automatic Exposure) The cameras built-in exposure meter automatically sets the exposure. The 3 AE modes available on this camera are P mode, in which the camera selects both the aperture and shutter speed, A mode, in which the user selects the aperture and the camera sets the shutter speed, and S mode, in which the user selects the shutter speed and the camera sets the aperture. In M mode, the user selects both the aperture and the shutter speed. Aperture The adjustable lens opening which controls the amount of light that enters the camera. The larger the aperture, the shorter the depth of field and the fuzzier the background. The smaller the aperture, the greater the depth of field and the sharper the background. Aperture is measured in f/stops. Larger aperture values indicate smaller apertures, and smaller aperture values indicate larger apertures. AUTO mode Program AE mode (see P (Program) Mode). In addition, this mode features automatic flash pop up when shooting in low-light conditions. Center weighted averaging metering A light metering mode or technique that uses an average of the center and periphery of the image area but is biased toward the information at the center of the image area. This method is best used when the brightness of the center and periphery of the image area does not vary greatly. See also digital ESP metering and spot metering. Color space A model that describes colors using more than three coordinates. Color spaces such as sRGB, Adobe RGB are occasionally used for encoding/reproducing colors. Color temperature The spectral balance of different white light sources is rated numerically by color temperature - a concept of theoretical physics that, with incandescent lighting, corresponds roughly to the absolute lamp filament temperature, expressed on the Kelvin (K) temperature scale. The higher the color temperature, the richer the light in bluish tones and the poorer in reddish; the lower the color temperature, the richer the light in reddish tones and the poorer in bluish. You may encounter difficulties with color reproduction when shooting indoors under fluorescent lighting, or where sunlight and fluorescent lighting are both present. Your camera is provided with a white balance adjustment feature that you can use to compensate for the odd effects of combinations of color you may occasionally see in your pictures.
Information
13
133
EN
13
134
EN
Compression rate Compression is a method of reducing file size by abbreviating some contents of data, and compression rate denotes the amount of compression. The actual effect of the selected compression rate could vary with the content of the image. The numbers for the compression rate selected with this camera provide only a general scale for reference and are not precise measurements. DCF (Design rule for Camera File system) A standard for image files by the Japan Electronics and Information Technology Industries Association (JEITA). Depth of Field Depth of Field refers to the distance from the nearest to the furthest point of perceived sharp focus in a picture. Digital ESP (Electro-Selective Pattern) Light Metering This determines the exposure by splitting the image into 49 areas and metering and calculating the light levels in each area. DPOF (Digital Print Order Format) This is for saving desired print settings on digital cameras. By entering which images to print and the number of copies of each, the user can easily have the desired images printed by a printer or print lab that supports the DPOF format. Eclipsing (Vignetting) This refers to when an object obscures part of the field of view so that the whole subject is not photographed. Vignetting also refers to when the image seen through the viewfinder does not exactly match the image shot through the objective lens, so the photographed image includes objects not seen through the viewfinder. In addition, vignetting can occur when an incorrect lens hood is used, causing shadowing to appear in the corners of the image. EV (Exposure Value) A system for measuring exposure. EV0 is when the aperture is at F1 and the shutter speed is 1 second. The EV then increases by 1 each time the aperture increases by one F stop or the shutter speed increases by one increment. EV can also be used to indicate brightness and ISO settings. Exposure The amount of light used to capture an image. The exposure is determined by the length of time the shutter is open (shutter speed) and the amount of light that passes through the lens (aperture). Image pickup device This converts light passing through the lens into electrical signals. On this camera, light is picked up and converted into RGB signals to build a single image. Imager contrast detection system Focusing method based on the contrast of the image of the subject captured on the image pickup device. ISO International abbreviation for International Organization for Standardization. The sensitivity setting used in digital cameras is based on the same ISO standard used for film sensitivity. The sensitivity is denoted as shown in ISO 100. Higher ISO values indicate greater sensitivity to light, so images can be exposed even in low-light conditions. JPEG (Joint Photographic Experts Group) A compression format for color still images. Photographs (images) shot using this camera are recorded onto the card in JPEG format when the Record mode is set to a setting other than [RAW]. By downloading these images to a personal computer, users can edit them using graphics application software or view the images using an Internet web browser. M (Manual) Mode The user sets both the aperture and shutter speed.
Information
NTSC (National Television Systems Committee) / PAL (Phase Alternating Line) Television formats. NTSC is mainly used in Japan, North America and Korea. PAL is mainly used in Europe and China. Number of pixels (PIXEL COUNT) The number of dots (pixels) used to create an image denotes the image size. For instance, an image in 640 480 pixel count is the same size as the computer screen if the monitor setting is also 640 480. If the monitor setting is 1024 768, the image only takes up part of the screen. P (Program) Mode Also called Program AE mode. The camera automatically sets the best shutter speed and aperture for the shot. PictBridge A standard that enables digital cameras and printers made by different manufacturers to be connected, and also allows pictures to be printed directly from the camera. Pixels A pixel is the smallest unit (dot) used to make up an image. Clear large-sized printed images require millions of pixels. RAW Refers to raw data, data which has not been enhanced with a camera option like white balance, sharpness, contrast, etc. This file format is for viewing and processing with our own software. You may not be able to open or process these files with other graphics software applications, and these files cannot be selected for DPOF printing. RAW files are assigned an orf file extension (*.orf). S (Shutter Priority) Mode Also called Shutter Priority AE mode. The user selects the shutter speed and the camera automatically varies the aperture so that the picture is taken with the best exposure. Single-lens reflex camera A camera that uses a mirror to reflect the light entering from the shooting lens so the image can be checked in the viewfinder. There is no difference between the composition to be captured and the composition viewed on the viewfinder. Sleep Mode A mode designed to save battery life. The camera automatically enters the sleep mode if you do not operate it for a certain time. To get out of the sleep mode, use any button on the camera (shutter button, menu button, etc.). Spot metering The meter reading is taken from a very small area around the center of the subject, defined by the spot metering area mark in the viewfinder. Spot metering is ideal for use in difficult light conditions, or when the important element of the picture (subjects face) is small. Use spot metering for backlit subjects, or sports and stage performers. See also digital ESP metering and center weighted averaging metering. TFT (Thin-Film Transistor) Color Monitor A color monitor constructed using thin-film technology. TTL phase-contrast detection system This is used to measure the distance to the subject. The camera determines if the image is focused by the detected phase contrast. TTL (Through-The-Lens) System To help adjust exposure, a light receptor built into the camera directly measures the light passing through the lens.
Information
13
135
EN
Specifications
Camera specifications
Product type
Product type Lens Lens mount Equivalent focal length on a 35 mm film camera : Single-lens reflex digital camera with interchangeable lens system : Zuiko Digital, Four Thirds System Lens : Four Thirds mount : Approx. twice the focal length of the lens : : : : : : : : : : : : : : 4/3" Live MOS sensor Approx. 11,800,000 pixels Approx. 10,000,000 pixels 17.3 mm (H) 13.0 mm (V) (0.7" 0.5") 1.33 (4:3) Eye-level single-lens reflex viewfinder Approx. 95% (for field of view on recorded images) Approx. 0.92 (-1 m-1, 50 mm lens, infinity) Approx. 14 mm (0.6") from the cover glass (-1 m-1) -3.0 - +1.0 m-1 Quick return half mirror When PREVIEW registered with the < button Fixed Interchangeable
Viewfinder
Product type Field of view Viewfinder magnification Eye point Diopter adjustment range Optical path fraction Depth of field Focusing screen Eyecup
Live view
: Uses Live MOS sensor for shooting : Field of view of 100%
LCD monitor
Product type Total no. of pixels : 2.7" TFT color LCD : Approx. 230,000 dots : Computerized focal-plane shutter : 1/4000 - 60 sec., Bulb shooting : TTL phase-contrast detection system/Imager contrast detection system : 3-point multiple AF (left, center, right) 11-point multiple AF: with [IMAGER AF] : EV 0 - EV 19 (ISO 100 equivalent, at room temperature 20 C (68 F), TTL phase-contrast detection system) : Auto, Optional : The built-in flash provides light. : TTL full-aperture metering system (1) Digital ESP metering (2) Center weighted averaging metering (3) Spot metering (approx. 2% for the viewfinder screen) : EV 1 - 20 (Digital ESP metering, Center weighted average metering, Spot metering) (At room temperature, 50 mm f2, ISO 100) : (1) AUTO : Fully automatic (2) P : Program AE (Program shift can be performed) (3) A : Aperture priority AE (4) S : Shutter priority AE (5) M : Manual : 100 - 1600 : 5 EV (1/3, 1/2, 1 EV step)
Shutter
Product type Shutter
Auto focus
Product type Focusing points AF luminance range Selection of focusing point AF illuminator
Exposure control
Metering system
13
136
EN
Information
White balance
Product type Mode setting : Image pickup device : Auto, Preset WB (8 settings), Customized WB, One-touch WB : CF card (Compatible with Type I and II) Microdrive (Compatible with FAT 16/32) xD-Picture Card : Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF)), RAW Data : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge : Single-frame playback, Close-up playback, Index display, Image rotation, Slideshow, Light box display, Calendar display : Information display, Histogram display : Single-frame shooting, Sequential shooting, Self-timer, Remote control : 3.5 frames/sec. (Max. no. of storable sequential pictures: 8 frames in RAW) : Operation time: 12 sec., 2 sec. : Operation time: 2 sec., 0 sec. (instantaneous shooting) (RM-1 Remote Control (optional)) : : : : Synchronized with the camera at 1/180 sec. or less TTL-AUTO (TTL pre-flash mode), AUTO, MANUAL Hot shoe Compatible with the Olympus wireless RC flash system
Recording
Memory Recording system Applicable standards
Playback
Playback mode Information display
Drive
Drive mode Sequential shooting Self-timer Optical remote control
Flash
Synchronization Flash control mode External flash attachment Wireless flash function
External connector
USB connector, VIDEO OUT connector (Multi-connector)
Power supply
Battery : Li-ion Battery (BLM-1) 1 : 136 mm (W) 91.5 mm (H) 68 mm (D) (5.4" 3.6" 2.7") (excluding protrusions) : Approx. 475 g (1.0 Ib.) (without battery) : 0 C - 40 C (32 F - 104 F) (operation)/ -20 C - 60 C (-4 F - 140 F) (storage) : 30 - 90% (operation)/10 - 90% (storage)
Dimensions/weight
Dimensions Weight Temperature Humidity
Operating environment
Information
13
137
EN
Battery/charger specifications
BLM-1 Lithium ion battery
MODEL NO. Product type Nominal voltage Nominal capacity No. of charge and discharge times Ambient temperature Dimensions Weight : : : : PS-BLM1 Rechargeable Lithium ion battery DC 7.2 V 1500 mAh
: Approx. 500 times (varies with usage conditions) : 0C - 40C (32F - 104F) (charging) -10C - 60C (14F - 140F) (operation) -20C - 35C (-4F - 95F) (storage) : Approx. 39 mm (W) 55 mm (D) 21.5 mm (H) (1.5" 2.2" 0.8") : Approx. 75 g (0.2 Ib.) (without protection cap)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON THE PART OF THE MANUFACTURER.
13
138
EN
Information
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. DANGER WARNING If the product is used without observing the information given under this symbol, serious injury or death may result. If the product is used without observing the information given under this symbol, injury or death may result. If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or loss of valuable data may result.
CAUTION
WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
General Precautions
Read All Instructions Before you use the product, read all operating instructions. Save all manuals and documentation for future reference. Cleaning Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. Attachments For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. Water and Moisture For precautions on products with weatherproof designs, read the weatherproofing sections. Location To avoid damage to the product, mount the product securely on a stable tripod, stand, or bracket. Power Source Connect this product only to the power source described on the product label. Foreign Objects To avoid personal injury, never insert a metal object into the product. Heat Never use or store this product near any heat source such as a radiator, heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers.
Information
13
139
EN
CAUTION
( Stop using the camera immediately if you notice any unusual odors, noise, or smoke around it. Never remove the batteries with bare hands, which may cause a fire or burn your hands. ( Never hold or operate the camera with wet hands. ( Do not leave the camera in places where it may be subject to extremely high temperatures. Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire. Do not use the charger if it is covered (such as a blanket). This could cause overheating, resulting in fire. ( Handle the camera with care to avoid getting a low-temperature burn. When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following: When used for a long period, the camera will get hot. If you hold on to the camera in this state, a lowtemperature burn may be caused. In places subject to extremely cold temperatures, the temperature of the cameras body may be lower than the environmental temperature. If possible, wear gloves when handling the camera in cold temperatures. ( Be careful with the strap. Be careful with the strap when you carry the camera. It could easily catch on stray objects - and cause serious damage.
DANGER
The camera uses a lithium ion battery specified by Olympus. Charge the battery with the specified charger. Do not use any other chargers. Never heat or incinerate batteries. Take precautions when carrying or storing batteries to prevent them from coming into contact with any metal objects such as jewelry, pins, fasteners, etc. Never store batteries where they will be exposed to direct sunlight, or subjected to high temperatures in a hot vehicle, near a heat source, etc. To prevent causing battery leaks or damaging their terminals, carefully follow all instructions regarding the use of batteries. Never attempt to disassemble a battery or modify it in any way, by soldering, etc. If battery fluid gets into your eyes, flush your eyes immediately with clear, cold running water and seek medical attention immediately. Always store batteries out of the reach of small children. If a child accidentally swallows a battery, seek medical attention immediately.
13
140
EN
Information
WARNING
Keep batteries dry at all times. To prevent batteries from leaking, overheating, or causing a fire or explosion, use only batteries recommended for use with this product. Insert the battery carefully as described in the operating instructions.
If rechargeable batteries have not been recharged within the specified time, stop charging them and do not use them. Do not use a battery if it is cracked or broken. If a battery leaks, becomes discolored or deformed, or becomes abnormal in any other way during operation, stop using the camera. If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately. Never subject batteries to strong shocks or continuous vibration.
CAUTION
Before loading, always inspect the battery carefully for leaks, discoloration, warping, or any other abnormality. The battery may become hot during prolonged use. To avoid minor burns, do not remove it immediately after using the camera. Always unload the battery from the camera before storing the camera for a long period. This camera uses a lithium ion battery specified by Olympus. Do not use any other type of battery. For safe and proper use, read the batterys instruction manual carefully before using it. If the batterys terminals get wet or greasy, camera contact failure may result. Wipe the battery well with a dry cloth before use. Always charge a battery when using it for the first time, or if it has not been used for a long period. When operating the camera with battery power at low temperatures, try to keep the camera and spare battery as warm as possible. A battery that has run down at low temperatures may be restored after it is warmed at room temperature. The number of pictures you can take may vary depending on the shooting conditions or battery. Before going on a long trip, and especially before traveling abroad, purchase extra batteries. A recommended battery may be difficult to obtain while traveling. Please recycle batteries to help save our planets resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations.
LCD Monitor
Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode failure or damage to the monitor. A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction. When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor. This is not a malfunction; it will be less noticeable in playback mode. In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color may change temporarily. When using the camera in extremely cold places, it is a good idea to occasionally place it in a warm place. An LCD monitor exhibiting poor performance due to low temperatures will recover in normal temperatures. The LCD used for the monitor is made with high-precision technology. However, black spots or bright spots of light may appear constantly on the LCD Monitor. Due to its characteristics or the angle at which you are viewing the monitor, the spot may not be uniform in color and brightness. This is not a malfunction.
Information
13
141
EN
Lens
Do not immerse in water or splash with water. Do not drop or exert strong force on the lens. Do not hold at the moving part of the lens. Do not touch the lens surface directly. Do not touch the contact points directly. Do not subject to abrupt temperature changes. The operating temperature range is -10 C - 40 C (14 F - 104 F). Always use within this temperature range.
Disclaimer of Warranty
Olympus makes no representations or warranties, either expressed or implied, by or concerning any content of these written materials or software, and in no event shall be liable for any implied warranty of merchantability or fitness for any particular purpose or for any consequential, incidental or indirect damages (including but not limited to damages for loss of business profits, business interruption and loss of business information) arising from the use or inability to use these written materials or software or equipment. Some countries do not allow the exclusion or limitation of liability for consequential or incidental damages, so the above limitations may not apply to you. Olympus reserves all rights to this manual.
Warning
Unauthorized photographing or use of copyrighted material may violate applicable copyright laws. Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe upon the rights of copyright owners.
Copyright Notice
All rights reserved. No part of these written materials or this software may be reproduced or used in any form or by any means, electronic or mechanical, including photocopying and recording or the use of any type of information storage and retrieval system, without the prior written permission of Olympus. No liability is assumed with respect to the use of the information contained in these written materials or software, or for damages resulting from the use of the information contained therein. Olympus reserves the right to alter the features and contents of this publication or software without obligation or advance notice.
FCC Notice
Radio and Television Interference Changes or modifications not expressly approved by the manufacturer may void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Adjust or relocate the receiving antenna. - Increase the distance between the camera and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult your dealer or an experienced radio/TV technician for help. Only the OLYMPUS-supplied USB cable should be used to connect the camera to USB enabled personal computers (PC).
13
142
EN
Information
Any unauthorized changes or modifications to this equipment would void the users authority to operate it.
: E-520 : OLYMPUS : : 3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, USA Telephone Number : 484-896-5000
Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product.
Information
Provisions of warranty
1. If this product proves to be defective, although it has been used properly (in accordance with the written Handling Care and Operating instructions supplied with it), during a period of two years from the date of purchase from an authorized Olympus distributor within the business area of Olympus Imaging Europa GmbH as stipulated on the website: http://www.olympus.com this product will be repaired, or at Olympuss option replaced, free of charge. To claim under this warranty the customer must take the product and this Warranty Certificate before the end of the two year warranty period to the dealer where the product was purchased or any other Olympus service station within the business area of Olympus Imaging Europa GmbH as stipulated on the website: http://www.olympus.com. During the one year period of the World Wide Warranty the customer may turn the product in at any Olympus service station. Please notice that not in all countries such Olympus service station exists. 2. The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product.
13
143
EN
3. This warranty does not cover the following and the customer will be required to pay repair charge, even for defects occurring within the warranty period referred to above. (a) Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions, etc.) (b) Any defect that occurs due to repair, modification, cleaning, etc. performed by anyone other than Olympus or an Olympus authorized service station. (c) Any defect or damage that occurs due to transport, a fall, shock, etc. after purchase of the product. (d) Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural disasters, environmental pollution and irregular voltage sources. (e) Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc.), improper maintenance, etc. (f) Any defect that occurs due to exhausted batteries, etc. (g) Any defect that occurs due to sand, mud, etc. entering the inside of the product casing. (h) When this Warranty Certificate is not returned with the product. (i) When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and date of purchase, the customers name, the dealers name, and the serial number. (j) When proof of purchase is not presented with this Warranty Certificate. 4. This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. 5. Olympuss sole liability under this warranty shall be limited to repairing or replacing the product. Any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect of the product, and in particular any loss or damage caused to any lenses, films, other equipment or accessories used with the product or for any loss resulting from a delay in repair or loss of data, is excluded. Compelling regulations by law remain unaffected by this.
Trademarks
IBM is a registered trademark of International Business Machines Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Macintosh is a trademark of Apple Inc. xD-Picture Card is a trademark. Shadow Adjustment Technology function contains patented technologies from Apical Limited.
All other company and product names are registered trademarks and/or trademarks of their respective owners. The standards for camera file systems referred to in this manual are the Design Rule for Camera File System/DCF standards stipulated by the Japan Electronics and Information Technology Industries Association (JEITA).
13
144
EN
Information
Index
Symbols
A .......................................................... 92 CU/HI ............................................... 98 w+F ........................................................... 95 8 (Beep sound) ........................................... 93 o (Image stabilizer) ..................................... 60 W (Language selection) ........................... 98 # SLOW LIMIT ............................................. 95 # X-SYNC. ................................................... 95 < CUSTOM .................................................. 94 < EASY ........................................................ 94 Y Custom Menu 1 ....................................... 131 Z Custom Menu 2 ....................................... 133 ; FUNCTION ............................................. 91 j FUNCTION ............................................. 92 j /</Y ........................................................ 92 P HOME .................................................... 91 n LOCK ..................................................... 92 q Playback Menu ...................................... 131 # RC mode ................................................... 76 K SET ......................................................... 96 W Shooting Menu 1 ..................................... 130 X Shooting Menu 2 ..................................... 130 a AF/MF ....................................................... 89 b BUTTON/DIAL .......................................... 89 c RELEASE/j .......................................... 93 d DISP/8/PC ............................................. 93 e EXP/e/ISO ............................................ 94 f # CUSTOM ............................................. 95 g K/COLOR/WB ....................................... 95 h RECORD/ERASE ..................................... 96 i K UTILITY .............................................. 98 h VIVID ........................................................ 67 i NATURAL ................................................. 67 j MUTED ..................................................... 67 ZPORTRAIT ................................................ 67 4 h TIMER ..................................................... 93 Aperture priority shooting A ......................... 44 Aperture value .............................................. 43 Auto flash AUTO ........................................... 70 Auto focus ............................................. 56, 112 AUTO POP UP ............................................. 95 AUTO shooting AUTO ................................... 4 Auto white balance ................................. 64, 65
B
B (Basic) ............................................... 62, 115 B&W FILTER ................................................ 68 BACKLIT LCD ............................................... 93 Battery .................................................. 11, 122 BEACH&SNOW g ....................................... 5 BLACK & WHITE .......................................... 85 BULB FOCUSING ........................................ 89 Bulb shooting .......................................... 46, 60 BULB TIMER ................................................ 95 BUTTON TIMER ........................................... 92
C
C-AF (continuous AF) ................................... 53 C-AF+MF ...................................................... 53 Calendar display ........................................... 81 CANDLE & .................................................... 5 CARD SETUP ....................................... 88, 121 Cards .................................................... 13, 121 Center weighted averaging metering J ..... 48 CF/xD ............................................................ 98 CHILDREN G ................................................ 5 CLEANING MODE ...................................... 120 Close-up playback U ................................... 79 COLOR SPACE ............................................ 96 Color temperature ....................................... 127 CompactFlash ....................................... 13, 121 Comparison screen ....................................... 41 Compression rate ......................................... 62 Continuous AF (C-AF) .................................. 53 CONTRAST .................................................. 68 CONTROL .................................................... 94 COPY ALL .................................................... 86 Custom printing ........................................... 104 CUSTOM RESET ......................................... 30 Custom white balance CWB ................... 64, 65
A
Adobe RGB ................................................... 96 AE BKT .......................................................... 50 AE bracketing ................................................ 50 AE lock .......................................................... 49 AEL/AFL ........................................................ 90 AEL/AFL MEMO ............................................ 91 AELMetering .................................................. 95 AF AREA ................................................. 54, 92 AF ILLUMINAT. ............................................. 89 AF MODE ................................................ 52, 92 AF SENSOR .................................................. 37 AF target ........................................................ 54 ALL > ....................................................... 95 ALL ERASE ................................................... 88 ANTI-SHOCK z .......................................... 60
D
Date/time setting X .................................... 15 DIAL DIRECTION ......................................... 90 DIAL FUNCTION .......................................... 89 Digital ESP metering e ............................. 47 Diopter adjustment ........................................ 14 Direct buttons ................................................ 27 Direct print .................................................. 102 DIS MODE q ................................................ 5 DOCUMENTS @ ........................................... 5 dpi SETTING ................................................ 97
145
EN
E
Easy printing ............................................... 103 Easy shooting modes ...................................... 4 EDIT FILENAME ........................................... 98 Enlarged display ............................................ 41 EV STEP ....................................................... 94 Exposure compensation F ........................... 48 Eyepiece cover .............................................. 58
LIVE PREVIEW .......................................47, 91 Live view ........................................................36 LIVE VIEW AF MODE ...................................37 LIVE VIEW BOOST .......................................94 LOW KEY ......................................................68
M
X (Middle) .............................................62, 115 MACRO J ......................................................5 Manual flash ..................................................72 Manual focus (MF) ...................................40, 53 Manual shooting M ........................................45 Menu ..............................................................29 METERING ..............................................47, 92 MF .................................................................91 MF (manual focus) .........................................53 Microdrive ..............................................13, 121 Monitor adjustment s .................................98 MONOTONE .................................................67 MTP .......................................................93, 110 My mode ........................................................91 MY MODE SETUP ........................................92
F
F (Fine) .................................................. 62, 115 FACE DETECT g .................................. 39, 94 FILE NAME ................................................... 97 Fill-in flash # ................................................ 71 FIREWORKS ( ............................................. 5 FIRMWARE ................................................... 99 FL BKT .......................................................... 74 Flash bracketing ............................................ 74 Flash intensity control w ............................. 74 Flash mode # ............................................... 70 Flash off $ ................................................... 71 Fn FACE DETECT .................................. 39, 91 Focus lock ..................................................... 56 FOCUS RING ................................................ 89 FORMAT ..................................................... 121 Four Thirds system lenses .......................... 122 FRAME ASSIST ............................................ 94
N
N (Normal) .............................................62, 115 NATURE MACRO r .....................................5 NIGHT SCENE G ..........................................5 NIGHT+PORTRAIT U ...................................5 NOISE FILTER ..............................................69 NOISE REDUCT. ..........................................69 NTSC .............................................................99 Number of pixels ............................................62
G
GRADATION ................................................. 68
H
HIGH KEY ..................................................... 68 Histogram ........................................ 40, 82, 116 Home position p ......................................... 55 HYBRID AF o ............................................ 37
O
OLYMPUS Master .......................................106 Olympus wireless RC flash system ...............76 One-touch white balance V ............64, 66, 91
P
PAL ................................................................99 PANORAMA s ........................................5, 42 PICT. TONE ..................................................68 PictBridge ....................................................102 PICTURE MODE ...........................................67 Pixel count ...............................................62, 96 PIXEL MAPPING .........................................120 PORTRAIT I .................................................5 Preset white balance ...............................64, 65 Preview ....................................................47, 91 Print mode < ..............................................104 Print reservation ..........................................100 PRIORITY SET ..............................................97 Program shift % ...........................................43 Program shooting P ......................................43 Protecting 0 ...............................................87
I
IMAGE STABILIZER o ................................ 60 IMAGER AF p ........................................... 37 Index display G ........................................... 81 Information display .................................. 40, 82 ISO .......................................................... 51, 92 ISO-AUTO ..................................................... 94 ISO-AUTO SET ............................................. 94
J
JPEG EDIT .................................................... 84
L
Y (Large) .............................................. 62, 115 LANDSCAPE L ............................................. 5 LANDSCAPE+PORTRAIT K ......................... 5 Lens ...................................................... 12, 122 Light box display ........................................... 80 Lithium ion battery ................................. 11, 122 Lithium ion charger ................................ 11, 122
Q
QUICK ERASE ..............................................96
146
EN
R
RAW .............................................................. 62 RAW DATA EDIT .......................................... 84 RAW+JPEG ERASE ..................................... 97 RAWK ........................................................ 91 REC VIEW ..................................................... 99 Record mode K ............................ 62, 63, 128 REDEYE FIX ................................................. 85 Red-eye reduction flash ! ......................... 70 Remote control < ........................................... 58 RESET LENS ................................................ 89 RESET PROTECT ........................................ 87 Resizing Q .................................................. 85 RLS PRIORITY C .......................................... 93 RLS PRIORITY S .......................................... 93 Rotating images y ....................................... 83
U
UNDERWATER MACRO H ................... 5, 98 UNDERWATER WIDE I ....................... 5, 98 USB MODE ................................................... 93
V
VIDEO OUT .................................................. 99 Viewfinder ........................................... 6, 14, 16
W
WB .......................................................... 65, 92 WB BKT ........................................................ 67 WB compensation ......................................... 65 White balance bracketing ............................. 67 White balance WB ........................................ 64
X
xD-Picture Card .................................... 13, 121
S
W (Small) ............................................... 62, 115 S-AF (single AF) ............................................ 52 S-AF+MF ....................................................... 53 SATURATION ......................................... 68, 85 Scene mode g ......................................... 4 Self-timer Y .................................................. 58 SEPIA ............................................................ 85 Sequential shooting j ................................ 57 SF (Super Fine) ..................................... 62, 115 SHADING COMP. ......................................... 96 SHADOW ADJ .............................................. 85 SHARPNESS ................................................ 68 Shutter priority shooting S ............................ 44 Shutter speed ................................................ 43 Single AF (S-AF) ........................................... 52 Single-frame copy ......................................... 86 Single-frame erase S ................................... 88 Single-frame playback ................................... 79 Single-frame protect ...................................... 87 Single-frame shooting o ............................. 57 SLEEP ........................................................... 93 Slideshow m ............................................... 83 Slow synchronization #SLOW ..................... 70 Slow synchronization #SLOW2/2nd CURTAIN ........................................... 71 SPORT J ....................................................... 5 Spot metering 5 .......................................... 48 Spot metering - highlight control 5HI .......... 48 Spot metering - shadow control 5SH ......... 48 sRGB ............................................................. 96 STORAGE ............................................. 93, 107 Strap .............................................................. 10 SUNSET * .................................................... 5 Super control panel ................................... 7, 28 Super FP flash ............................................... 76
Z
ZUIKO DIGITAL interchangeable lens ........ 122
T
TEST PICTURE ............................................ 91 Trimming P ................................................. 85
147
EN
Printed in China