Professional Documents
Culture Documents
Highlights:
Connects & Go device with cables and manuals Alternative to OEM FMS interfaces No activation necessary Works on all Euro 3/4/5 trucks USA & EU trucks FMS standard support More data available Extremely secure Proven technology since 2003
What is a FMS Interface? A FMS interface is an electronics device to read the data from a vehicle data network and translate the data into standard FM FMS standard data. FMS interfaces have functions to: Act as a firewall, so the vehicle data network cannot be interfered Translate the proprietary vehicle signals into FMS standard ate Filter data, not all data is made available. About FMS standard The FMS standard is set of data defined by the Truck manufacturers. The list of 20 items is not sufficient to support full fl fleet management functions, and not all vehicles support the same set of data. Gosafe FMS interfaces. In the Gosafe FMS interfaces more data is made available for the advanced fleet management solutions. If data is not available Gosafe routines calculate the missing values. The Gosafe FMS interface incorporates Gosafe CAN technology. This CAN technology protects the vehicle CANBUS against any interference. It has a read only port with special electronics. With the BUS ainst Connect & Go cabling and clear installation instructions the risk of incorrect installation is minimized. Instructions the risk of incorrect installation is minimized.
Gosafe Company Limited ADD: B1801 High-tech Building, 908, Tian He Bei Road, Guangzhou, China tech T: +86-20-38373445 F: +86 +86-20-38288394 www.gosafesystem.com @: export@gosafe.com.cn
D2
Working state 0 Rest 1 Available 2 Work 3 Drive 4 5 res Time state 0 1 2 3 4 5 6 7..13
Normal 15 min. bef. 4 hours 4 hours reached 15 min. bef. 9 hours 9 hours reached 15 min. bef. 16 hours 16 hours reached 13 res.
Speed The Gosafe FMS shows the wheel based speed in km/h with a resolution of 1/256 km/h. It also shows information about clutch switch (CS), brake switch (BR) and cruise control (CC). For CS, BR and CC 0 means not pressed or inactive, 1 means pressed or active. If the Truck protocol is active (P=T) the state of the Power Take Off device (PTO) is also given. Concerning PTO state the FMS standard defines only the values 0(off/disabled), 5 (set) and 31 (not available). GOSAFE FMS interprets the received values according SAEJ1939-71 and output values between 0 and 19 as numerical values if the truck supports it. For values between 10 and 30 GOSAFE FMS outputs 'o' and for the value 31 'n'.If the Bus protocol is active (P=B) the state of the parking brake is displayed instead of the PTO device. 0 means parking brake open, 1 means parking brake set.
Gosafe Company Limited ADD: B1801 High-tech Building, 908, Tian He Bei Road, Guangzhou, China T: +86-20-38373445 F: +86-20-38288394 www.gosafesystem.com @: export@gosafe.com.cn
DoorControl2 This information is only supported in Bus protocol. The message shows the states of 10 doors. For every door 3 values are given: LockState, OpenState and EnableState (see table).
L (LockState) 0 1 unlocked Locked Door may be operated by the driver or a passenger Door cannot be operated by the driver or a passenger
Gosafe Company Limited ADD: B1801 High-tech Building, 908, Tian He Bei Road, Guangzhou, China T: +86-20-38373445 F: +86-20-38288394 www.gosafesystem.com @: export@gosafe.com.cn
These values are given for every door as a character string with 3 characters in the order LOE. For example DC2 loe 1:100 2:100 3:100 4:100 5:nnn 6:nnn 7:nnn 8:nnn 9:nnn 10:nnn means that 4 doors are present and all 4 doors are 'locked', 'closed' and 'disabled'. Air Suspension This information is only supported in Bus protocol. The message supports the air suspension pressure with the 4 bellow pressure values front axle left (FAL), front axle right (FAR, rear axle left (RAR) and rear axle right (RAR). The pressure is given in kPa with a resolution of 0.1 kPa. Air Supply This information is only supported in Bus protocol. It gives the air pressure values of the two service brakes. The values lues are given in kPa with resolutions of 8 kPa. Alternator This message shows the states of up to 4 alternators. A value of '0' means alternator is not charging, '1' means alternator is charging. This information is only supported in Bus protocol. Time Date Information about date and time. The output string is formatted as yyyy.mm.dd-hh:mm:ss where yyyy.mm.dd yyyy 4 digit year number
mm 2 digit month number tt 2 digit day number hh 2 digit hour (24 h format) mm 2 digit minute ss 2 digit second This information is only supported in Bus protocol.
Gosafe Company Limited ADD: B1801 High-tech Building, 908, Tian He Bei Road, Guangzhou, China tech T: +86-20-38373445 F: +86 +86-20-38288394 www.gosafesystem.com @: export@gosafe.com.cn
Brand
Model Ducato, Doblo, Fiorino, Scudo, Other models ther Fiesta, Mondeo, Ranger, Transit, Transit, Connekt, Other models Astra, Vectra, Combo, Vivaro, Movano, Other models All models Partner, Expert, Boxer A/B/C/E/S Class Cars G/M/R Class Cars Sprinter/Vito/Viano Vans Kangoo, Trafic, Master, Mascott Cars All models
Combo
Vivaro, Movano
Gosafe Company Limited ADD: B1801 High-tech Building, 908, Tian He Bei Road, Guangzhou, China tech T: +86-20-38373445 F: +86 +86-20-38288394 www.gosafesystem.com @: export@gosafe.com.cn